Automated radiosynthesis of [89Zr]Zr-DFOSq-Durvalumab for imaging of PD-L1 expressing tumours in vivo.

OBJECTIVES: 89Zr-labelled proteins are gaining importance in clinical research in a variety of diseases. To date, no clinical study has been reported that utilizes an automated approach for radiosynthesis of 89Zr-labelled radiopharmaceuticals. We aim to develop an automated method for the clinical production of 89Zr-labelled proteins and apply this method to Durvalumab, a monoclonal antibody targeting PD-L1 immune-checkpoint protein. PD-L1 expression is poorly understood and can be up-regulated over the course of chemo- and radiotherapy treatment. The ImmunoPET multicentre study aims to examine the dynamics of PD-L1 expression via 89Zr-Durvalumab PET imaging before, during, and after chemoradiotherapy. The developed automated technique will enable reproducible clinical production of [89Zr]Zr-DFOSq-Durvalumab for this study at three different sites. METHODS: Conjugation of Durvalumab to H3DFOSqOEt was optimized for optimal chelator-to-antibody ratio. Automated radiolabelling of H3DFOSq-Durvalumab with zirconium-89 was optimized on the disposable cassette based iPHASE technologies MultiSyn radiosynthesizer using a modified cassette. Activity losses were tracked using a dose calibrator and minimized by optimizing fluid transfers, reaction buffer, antibody formulation additives and pH. The biological profile of the radiolabelled antibody was confirmed in vivo in PD-L1+ (HCC827) and PD-L1- (A549) murine xenografts. Clinical process validation and quality control were performed at three separate study sites to satisfy clinical release criteria. RESULTS: H3DFOSq-Durvalumab with an average CAR of 3.02 was obtained. Radiolabelling kinetics in succinate (20 mM, pH 6) were significantly faster when compared to HEPES (0.5 M, pH 7.2) with >90 % conversion observed after 15 min. Residual radioactivity in the 89Zr isotope vial was reduced from 24 % to 0.44 % ± 0.18 % (n = 7) and losses in the reactor vial were reduced from 36 % ± 6 % (n = 4) to 0.82 % ± 0.75 % (n = 4) by including a surfactant in the reaction and formulation buffers. Overall process yield was 75 % ± 6 % (n = 5) and process time was 40 min. Typically, 165 MBq of [89Zr]Zr-DFOSq-Durvalumab with an apparent specific activity of 315 MBq/mg ± 34 MBq/mg (EOS) was obtained in a volume of 3.0 mL. At end-of-synthesis (EOS), radiochemical purity and protein integrity were always >99 % and >96 %, respectively, and dropped to 98 % and 65 % after incubation in human serum for 7 days at 37 °C. Immunoreactive fraction in HEK293/PD-L1 cells was 83.3 ± 9.0 (EOS). Preclinical in vivo data at 144 h p.i. showed excellent SUVmax in PD-L1+ tumour (8.32 ± 0.59) with a tumour-background ratio of 17.17 ± 3.96. [89Zr]Zr-DFOSq-Durvalumab passed all clinical release criteria at each study site and was deemed suitable for administration in a multicentre imaging trial. CONCLUSION: Fully automated production of [89Zr]Zr-DFOSq-Durvalumab for clinical use was achieved with minimal exposure to the operator. The cassette-based approach allows for consecutive productions on the same day and offers an alternative to currently used manual protocols. The method should be broadly applicable to other proteins and has the potential for clinical impact considering the growing number of clinical trials investigating 89Zr-labelled antibodies.

Development of a high-performance liquid chromatography method for rapid radiochemical purity measurement of [18 F]PSMA-1007, a PET radiopharmaceutical for detection of prostate cancer.

Since first becoming commercially available in 2018, the PET radiopharmaceutical [18 F]PSMA-1007 has been used widely for the diagnosis and staging of prostate cancer. A pharmacopoeia monograph first became available in 2021, prescribing a radiochemical purity specification of >91%, based on analytical results from both TLC (for [18 F]fluoride impurity alone) and HPLC (for all other 18 F-impurities). Though this monograph has provided clarity for the quality control testing of [18 F]PSMA-1007, it prescribes a HPLC method using phosphate buffer mobile phase that may present a risk of precipitation of phosphate salts in the HPLC system. The method also requires specialised hardware not immediately available to all laboratories. This work describes the development of a simple, rapid reversed-phase HPLC method utilising 0.1 M ammonium formate mobile phase for the accurate assessment of both [18 F]fluoride impurity and overall radiochemical purity in a single test. This method is especially useful for assessment of product stability over time. A more accurate TLC method for [18 F]fluoride impurity is also described.

Mucopolysaccharidosis type II (Hunter syndrome): Clinical and biochemical aspects of the disease and approaches to its diagnosis and treatment.

Mucopolysaccharidosis type II (MPS II, Hunter syndrome) is a rare X-linked lysosomal storage disease caused by mutations of the gene encoding the lysosomal enzyme iduronate-2-sulfatase (IDS), the role of which is to hydrolytically remove O-linked sulfates from the two glycosaminoglycans (GAGs) heparan sulfate (HS) and dermatan sulfate (DS). HS and DS are linear, heterogeneous polysaccharides composed of repeating disaccharide subunits of l-iduronic acid (IdoA) or d-glucuronic acid, (1→4)-linked to d-glucosamine (for HS), or (1→3)-linked to 2-acetamido-2-deoxy-d-galactose (N-acetyl-d-galactosamine) (for DS). In healthy cells, IDS cleaves the sulfo group found at the C-2 position of terminal non-reducing end IdoA residues in HS and DS. The loss of IDS enzyme activity leads to progressive lysosomal storage of HS and DS in tissues and organs such as the brain, liver, spleen, heart, bone, joints and airways. Consequently, this leads to the phenotypic features characteristic of the disease. This review provides an overview of the disease profile and clinical manifestation, with a particular focus on the biochemical basis of the disease and chemical approaches to the development of new diagnostics, as well as discussing current treatment options and emerging new therapies.

Heparin Mimetics: Their Therapeutic Potential.

Heparin mimetics are synthetic and semi-synthetic compounds that are highly sulfated, structurally distinct analogues of glycosaminoglycans. These mimetics are often rationally designed to increase potency and binding selectivity towards specific proteins involved in disease manifestations. Some of the major therapeutic arenas towards which heparin mimetics are targeted include: coagulation and thrombosis, cancers, and inflammatory diseases. Although Fondaparinux, a rationally designed heparin mimetic, is now approved for prophylaxis and treatment of venous thromboembolism, the search for novel anticoagulant heparin mimetics with increased affinity and fewer side effects remains a subject of research. However, increasingly, research is focusing on the non-anticoagulant activities of these molecules. Heparin mimetics have potential as anti-cancer agents due to their ability to: (1) inhibit heparanase, an endoglycosidase which facilitates the spread of tumor cells; and (2) inhibit angiogenesis by binding to growth factors. The heparin mimetic, PI-88 is in clinical trials for post-surgical hepatocellular carcinoma and advanced melanoma. The anti-inflammatory properties of heparin mimetics have primarily been attributed to their ability to interact with: complement system proteins, selectins and chemokines; each of which function differently to facilitate inflammation. The efficacy of low/non-anticoagulant heparin mimetics in animal models of different inflammatory diseases has been demonstrated. These findings, plus clinical data that indicates heparin has anti-inflammatory activity, will raise the momentum for developing heparin mimetics as a new class of therapeutic agent for inflammatory diseases.

The stereoselectivities of tributyltin hydride-mediated reductions of 5-bromo-D-glucuronides to L-iduronides are dependent on the anomeric substituent: syntheses and DFT calculations.

One of the shortest synthetic routes to L-iduronic acid derivatives is via free radical reduction of the C-5 bromide of the corresponding protected D-glucuronic acid derivative. The epimerization of such C-5 bromides to the L-ido derivatives via reaction with tributyltin hydride was investigated. It was found that the stereoselectivity of the reaction was dependent on the anomeric substituent. If the substituent was fluoride the L-ido product was obtained exclusively in 65-72% yield whereas the O-methyl or O-acetyl derivatives led to isomeric mixtures of both the L-ido and D-gluco products in different ratios depending on the reaction conditions. DFT calculations were performed to determine the stereoelectronic factors that favour formation of the L-ido isomer from the fluoride and suggest the selectivity is due to a transition state gauche effect and an Sn-F interaction.

Synthetic Approaches to L-Iduronic Acid and L-Idose: Key Building Blocks for the Preparation of Glycosaminoglycan Oligosaccharides.

L-Iduronic acid (IdoA) is an important monosaccharide component of glycosaminoglycans (GAGs) such as heparin, heparan sulfate and dermatan sulfate. GAGs are complex, highly sulfated polysaccharides that mediate a multitude of physiological and pathological processes via their interactions with a range of diverse proteins. The main challenge in the synthesis of GAG oligosaccharides is the efficient gram-scale preparation of IdoA building blocks since neither IdoA nor L-idose is commercially available or readily accessible from natural sources. In this review, the different synthetic approaches for the preparation of IdoA and its derivatives, including L-idose, are presented and discussed. Derivatives of the latter are often used in GAG synthesis and are elaborated to IdoA via selective oxidation at C-6 after incorporation into a GAG chain. Particular focus will be given to the preparation of IdoA synthons most commonly used for GAG oligosaccharide synthesis, and on the progress made since the last systematic review in this area.