ABSTRACT
Tissue engineering (TE) has sparked interest in creating scaffolds with customizable properties and functional bioactive sites. However, due to limitations in medical practices and manufacturing technologies, it is challenging to replicate complex porous frameworks with appropriate architectures and bioactivity in vitro. To address these challenges, herein, we present a green approach that involves the amino acid (l-lysine) initiated polymerization of É-caprolactone (CL) to produce modified polycaprolactone (PCL) with favorable active sites for TE applications. Further, to better understand the effect of morphology and porosity on cell attachment and proliferation, scaffolds of different geometries with uniform and interconnected pores are designed and fabricated, and their properties are evaluated in comparison with commercial PCL. The scaffold morphology and complex internal micro-architecture are imaged by micro-computed tomography (micro-CT), revealing pore size in the range of ~300-900 µm and porosity ranging from 30 to 70 %, while based on the geometry of scaffolds the compressive strength varied from 143 ± 19 to 214 ± 10 MPa. Additionally, the degradation profiles of fabricated scaffolds are found to be influenced by both the chemical nature and product design, where Lys-PCL-based scaffolds with better porosity and lower crystallinity degraded faster than commercial PCL scaffolds. According to in vitro studies, Lys-PCL scaffolds have produced an environment that is better for cell adhesion and proliferation. Moreover, the scaffold design affects the way cells interact; Lys-PCL with zigzag geometry has demonstrated superior in vitro vitality (>90 %) and proliferation in comparison to other designs. This study emphasizes the importance of enhancing bioactivity while meeting morphology and porosity requirements in the design of scaffolds for tissue engineering applications.
Subject(s)
Polyesters , Tissue Engineering , Tissue Scaffolds , Tissue Engineering/methods , Tissue Scaffolds/chemistry , Lysine , X-Ray MicrotomographyABSTRACT
Although multiple theories have speculated about the brainstem reticular formation's involvement in autistic behaviors, the in vivo imaging of brainstem nuclei needed to test these theories has proven technologically challenging. Using methods to improve brainstem imaging in children, this study set out to elucidate the role of the autonomic, nociceptive, and limbic brainstem nuclei in the autism features of 145 children (74 autistic children, 6.0-10.9 years). Participants completed an assessment of core autism features and diffusion- and T1-weighted imaging optimized to improve brainstem images. After data reduction via principal component analysis, correlational analyses examined associations among autism features and the microstructural properties of brainstem clusters. Independent replication was performed in 43 adolescents (24 autistic, 13.0-17.9 years). We found specific nuclei, most robustly the parvicellular reticular formation-alpha (PCRtA) and to a lesser degree the lateral parabrachial nucleus (LPB) and ventral tegmental parabrachial pigmented complex (VTA-PBP), to be associated with autism features. The PCRtA and some of the LPB associations were independently found in the replication sample, but the VTA-PBP associations were not. Consistent with theoretical perspectives, the findings suggest that individual differences in pontine reticular formation nuclei contribute to the prominence of autistic features. Specifically, the PCRtA, a nucleus involved in mastication, digestion, and cardio-respiration in animal models, was associated with social communication in children, while the LPB, a pain-network nucleus, was associated with repetitive behaviors. These findings highlight the contributions of key autonomic brainstem nuclei to the expression of core autism features.
Subject(s)
Autism Spectrum Disorder , Autistic Disorder , Animals , Child , Humans , Adolescent , Autistic Disorder/diagnostic imaging , Nociception , Brain Stem/diagnostic imaging , Reticular FormationABSTRACT
Waste from the sugar cane industry and alcohol distilleries is one of the sources of water pollution, and the degradation of this effluent is a very challenging task. Photocatalytic degradation can be an attractive alternative to conventional degradation processes. A vanadium-doped TiO2 (V-TiO2) photocatalyst for the degradation of spent wash and industrial dyes has been studied and reported here. V-doped TiO2 nanoparticles were prepared using a sol-gel method based on aqueous titanium peroxide with titanium isopropoxide as the Ti precursor and V2O5 as the V precursor. In order to observe the effect of the dopant on sol-gel behaviour, physicochemical and structural properties, the concentration of V was varied between 1.0% and 5% by weight. The crystallization temperature and time were optimized to obtain the required phase of V-TiO2. The physicochemical and structural characteristics of the V-doped TiO2 catalyst were determined using Brunauer-Emmett-Teller (BET), X-ray diffraction, FESEM, TEM, TG, FT-IR, Raman, PL and UV-visible spectroscopic techniques. UV-visible analysis showed a red shift in the absorption edge of TiO2 upon doping with V metal, which suggested an increase in the absorption of visible light due to a decrease in the effective band gap. The application potential of the V-TiO2 catalyst was studied via the degradation of sugar industry waste (spent wash) and Jakofix red dye (HE 8BN) under natural sunlight, as well as a standard artificial solar energy source (Xe lamp). The highest activity was observed for a 1% V-TiO2 photocatalyst for the degradation of spent wash and Jakofix red dye under natural sunlight. The degradation of coloured compounds in spent wash was monitored by gel permeation chromatography (GPC), which showed the degradation of high-molecular-weight compounds into low-molecular-weight fractions. The catalyst decomposed 90% of Jakofix red dye (HE 8BN) in 3.5 h and 65% of spent wash in 5 h under irradiation with natural sunlight, whereas Degussa P-25 TiO2 was only able to decompose 35% of the dye and 20% of spent wash under identical reaction conditions. A cycling stability test showed the high stability and reusability of the photocatalyst for degradation reactions, with a recovery of around 94-96%.
ABSTRACT
The synthesis of orthorhombic nitrogen-doped niobium oxide (Nb2O5-xNx) nanostructures was performed and a photocatalytic study carried out in their use in the conversion of toxic H2S and water into hydrogen under UV-Visible light. Nanostructured orthorhombic Nb2O5-xNx was synthesized by a simple solid-state combustion reaction (SSCR). The nanostructural features of Nb2O5-xNx were examined by FESEM and HRTEM, which showed they had a porous chain-like structure, with chains interlocked with each other and with nanoparticles sized less than 10 nm. Diffuse reflectance spectra depicted their extended absorbance in the visible region with a band gap of 2.4 eV. The substitution of nitrogen in place of oxygen atoms as well as Nb-N bond formation were confirmed by X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. A computational study (DFT) of Nb2O5-xNx was also performed for investigation and conformation of the crystal and electronic structure. N-Substitution clearly showed a narrowing of the band gap due to N 2p bands cascading above the O 2p band. Considering the band gap in the visible region, Nb2O5-xNx exhibited enhanced photocatalytic activity toward hydrogen evolution (3010 µmol h-1 g-1) for water splitting and (9358 µmol h-1 g-1) for H2S splitting under visible light. The enhanced photocatalytic activity of Nb2O5-xNx was attributed to its extended absorbance in the visible region due to its electronic structure being modified upon doping, which in turn generates more electron-hole pairs, which are responsible for higher H2 generation. More significantly, the mesoporous nanostructure accelerated the supression of electron and hole recombination, which also contributed to the enhancement of its activity.
ABSTRACT
In this report, CdS nanoparticles have been grown on the surface of CdWO4 nanorods via an in-situ approach and their high photocatalytic ability toward dye degradation and H2 evolution from H2S splitting under visible light has been demonstrated. The structural and optical properties as well as morphologies with varying amount of CdS to form CdS@CdWO4 have been investigated. Elemental mapping and high resolution transmission electron microscopy (HRTEM) analysis proved the sensitization of CdWO4 nanorods by CdS nanoparticles. A decrease in the PL emission of CdWO4 was observed with increasing amount of CdS nanoparticles loading possibly due to the formation of trap states. Considering the band gap in visible region, the photocatalytic study has been performed for H2 production from H2S and dye degradation under natural sunlight. The steady evolution of H2 was observed from an aqueous H2S solution even without noble metal. Moreover, the rate of photocatalytic H2 evolution over CdS modified CdWO4 is ca. 5.6 times higher than that of sole CdWO4 under visible light. CdS modified CdWO4 showed a good ability toward the photo-degradation of methylene Blue. The rate of dye degradation over CdS modified CdWO4 is ca. 7.4 times higher than that of pristine CdWO4 under natural sunlight. With increase in amount of CdS nanoparticle loading on CdWO4 nanorods the hydrogen generation was observed to be decreased where as dye degradation rate is increased. Such nano-heterostructures may have potential in other photocatalytic reactions.
ABSTRACT
We have demonstrated unique CdS0.5Se0.5 and CdSe quantum dot-glass nanosystems with quantum confinement effect. The stable, monodispersed CdS0.5Se0.5 and CdSe quantum dots (QDs) of size 2 to 12 nm have been grown in a germanate glass matrix by a simple melt quench technique at moderate temperature. XRD and Raman studies show formation of hexagonal CdS0.5Se0.5 and CdSe in the glass matrix. The quantum confinement of CdS0.5Se0.5 and CdSe was studied using TEM and UV-Vis spectroscopy. The band gap of the glass nanosystem was tuned from 3.6 to 1.8 eV by controlling the CdS0.5Se0.5 quantum dot size in the glass matrix. It can be further tuned to 1.68 eV using growth of CdSe quantum dots in the glass matrix. Considering the tuneable band gap of the CdS0.5Se0.5 and CdSe quantum dot-glass nanosystem for the visible light absorption, a study of size tuneable photocatalytic activity for hydrogen generation from hydrogen sulfide splitting was performed under visible light irradiation for the first time. The utmost hydrogen evolution, i.e. 8164.53 and 7257.36 µmol h(-1) g(-1) was obtained for the CdS0.5Se0.5 and CdSe quantum dot-glass nanosystems, respectively. The apparent quantum yield (AQY) was observed to be 26% and 21% for the CdS0.5Se0.5 and CdSe quantum dot-glass nanosystems, respectively. It is noteworthy that the present glass nanosystem as a photocatalyst was found to be very stable as compared to naked powder photocatalysts.
ABSTRACT
We have demonstrated a template-free large-scale synthesis of nanostructured Cd(x)Zn(1-x)S by a simple and a low-temperature solid-state method. Cadmium oxide, zinc oxide, and thiourea in various concentration ratios are homogenized at moderate temperature to obtain nanostructured Cd(x)Zn(1-x)S. We have also demonstrated that phase purity of the sample can be controlled with a simple adjustment of the amount of Zn content and nanocrystalline Cd(x)Zn(1-x)S(x = 0.5 and 0.9) of the hexagonal phase with 6-8 nm sized and 4-5 nm sized Cd(0.1)Zn(0.9)S of cubic phase can be easily obtained using this simple approach. UV-vis and PL spectrum indicate that the optical properties of as synthesized nanostructures can also be modulated by tuning their compositions. Considering the band gap of the nanostructured Cd(x)Zn(1-x)S well within the visible region, the photocatalytic activity for H2 generation using H2S and methylene blue dye degradation is performed under visible-light irradiation. The maximum H2 evolution of 8320 µmol h(-1)g(-1) is obtained using nanostructured Cd(0.1)Zn(0.9)S, which is four times higher than that of bulk CdS (2020 µmol h(-1) g(-1)) and the reported nanostructured CdS (5890 µmol h(-1)g(-1)). As synthesized Cd(0.9)Zn(0.1)S shows 2-fold enhancement in degradation of methylene blue as compared to the bulk CdS. It is noteworthy that the synthesis method adapted provides an easy, inexpensive, and pollution-free way to synthesize very tiny nanoparticles of Cd(x)Zn(1-x)S with a tunnable band structure on a large scale, which is quite difficult to obtain by other methods. More significantly, environmental benign enhanced H2 production from hazardous H2S using Cd(x)Zn(1-x)S is demonstrated for the first time.
Subject(s)
Cadmium Compounds/chemistry , Hydrogen/chemistry , Nanostructures/chemistry , Selenium Compounds/chemistry , Sunlight , Zinc Compounds/chemistryABSTRACT
The simple, template-free, low-temperature, large-scale synthesis of nanostructured CdS with the hexagonal wurtzite phase from bulk cadmium oxide under solid-phase conditions is demonstrated for the first time. The novel approach involves the homogenization of cadmium oxide (CdO) and thiourea in various stoichiometric ratios at moderate temperature. Among the different molar ratios of CdO and thiourea studied, the CdO/NH(2) CSNH(2) molar ratio of 1:2 is found to be the best to obtain highly pure CdS. The obtained CdS nanostructures exhibit excellent cubic morphology and high specific surface area with a particle size in the range of 5-7 nm. The bandgap of the nanostructured CdS is in the range of 2.42 to 2.46 eV due to its nanocrystalline nature. In photoluminescence studies, emission is observed at 520.34 and 536.42 nm, which is characteristic of the greenish-yellow region of the visible spectrum. Considering the bandgap of the CdS is within the visible region, the photocatalytic activity for H(2) generation and organic dye degradation are performed under visible-light irradiation. The maximum H(2) evolution of 2945 µmol h(-1) is obtained using nanostructured CdS prepared in the 1:2 ratio, which is three times higher than that of bulk CdS (1010 µmol h(-1) ). CdS synthesized using the 1:2 molar ratio shows maximum methylene blue degradation (87.5%) over a period of 60 min, which is approximately four times higher than that of bulk CdS (22%). This amazing performance of the material is due to its nanocrystalline nature and the high surface area of the CdS. The proposed simple methodology is believed to be a significant breakthrough in the field of nanotechnology, and the method can be further generalized as a rational preparation scheme for the large-scale synthesis of various other nanostructured metal sulfides.