The abundance and analytical characterization of microplastics in the surface water of Haryana, India.

Microplastic (MP) contamination has become a serious environmental concern that affects terrestrial environments, aquatic ecosystems, and human health. The current study assesses the presence, abundance, and morphology of MPs present in the surface water of Rohtak district, Haryana, India, which is rapidly undergoing industrialization. While the morphological studies of MPs were conducted through stereo microscopy and field emission-scanning electron microscopy (FE-SEM), the elemental composition of polymers was analyzed through attenuated total reflectance-Fourier transform infrared (ATR-FTIR). The results revealed that the surface water was significantly contaminated by polyethylene, polypropylene, and polystyrene. Moreover, the abundance of MPs was found to be 16-28 particles/L with an average value of 23 particles/L. Most of the MPs had fibrous morphology with the specifics being, fibers (43.9%), fragments (23.7%), films (17%), and pellets (15.4%). The MPs exhibited a size range of 0.61-4.87 mm, with an average size measured at 2.03 ± 0.04 mm. Also, the MP pollution load index values for the surface water bodies were found to be below 10, indicating a low risk category. Though currently designated as "low risk," it is important that mitigation strategies be brought over at this juncture to further prevent the deterioration of quality of water. Thus, this study not only intends to bring forth the impact of human activities, industrial waste, open waste dumping, and inadequate municipal waste management practices on increasing MP concentration but also highlights the sustainable alternatives and strategies to address this emerging pollutant in urban water systems. For further prevention, the implementation of stringent regulations and on-site plastic waste segregation is a critical component in preventing the disposal of plastic waste in surface water bodies. RESEARCH HIGHLIGHTS: The abundance of MPs was found to be 16-28 particles/L, with an average value of 23 particles/L. The surface water bodies in Rohtak district fall into the hazard categories of low risk with values less than 10. The overall MP concentration in water, across all five areas, based on color was in order: white/transparent (39.1%), black (15%), gray (9.1%), green (8.7%), blue (7.8%), red (7.8%), orange (6.3%), and yellow (6.1%). The dominant polymers were polyethylene (PE) (42%) and polypropylene (41%) as determined by FTIR spectroscopy.

Evaluation of contaminated groundwater for excessive heavy metal presence and its further assessment of the potential risk to public health.

Water plays a significant role in human life. However, the contamination of groundwater by heavy metals (HMs) has profound implications for public health. Industrialization, urbanization, and agricultural activities are turning out to be major causes for the increasing concentration of HMs in rapidly industrializing areas like Rohtak district, Haryana, India. The current study aimed at evaluating and predicting the health hazards associated with the radical rise of HMs in the groundwater of Rohtak district. For this purpose, 45 seasonal-based groundwater samples were collected from five blocks in Rohtak district, namely Kalanaur, Meham, Lakhan Majra, Rohtak City, and Sampla, both during pre- and post-monsoon seasons. Besides physicochemical analysis, these groundwater samples were analyzed for the contamination of HMs. The findings revealed that groundwater samples were relatively more contaminated during the post-monsoon period rather than pre-monsoon. The water quality index (WQI), devised to classify water quality into specific classes, depicted the Kalanaur region as "very poor." Another index named the HM pollution index (HPI) denoted the levels of HMs and categorized Kalanaur as most deteriorated, followed by Meham, Lakhan Majra, Sampla, and Rohtak City. Additionally, principal component analysis (PCA) was employed that showed a significant variation in the distribution pattern of HMs, with the major load being attributed to PC1 and PC2 for both seasons. Pearson's correlation analysis indicated a significant association of pH (R2 = 0.917) with HMs (specifically for Cd and Cr). In terms of health risk assessment, carcinogenic human health risk due to Pb and Cr was found to be higher in children than adults. Non-carcinogenic risk, indicative of harmful human health effects, apart from cancer, was calculated in terms of hazard quotient (HQ) and hazard index (HI). Results of the same, designated "children" as a vulnerable category compared with "adults," especially in the Kalanaur, Sampla, and Rohtak City blocks of the study area. The results thus reiterated that Kalanaur is the most contaminated block among the five blocks chosen and should be given urgent attention. The study holds importance as it provides a framework regarding the methodology that should be adapted for the evaluation, management, and protection of groundwater at a regional level, which could further be replicated by environmentalists and hydrogeologists across the world. PRACTITIONER POINTS: Water logging is one of the most common problems in Kalanaur block of Rohtak district, responsible for causing groundwater pollution. Cadmium and lead pollution was prevalent in Rohtak due to electroplating industries, paint industry, automobile sector, and industrial discharge. Bioremediation is one of the suitable techniques that can be used for the treatment of groundwater that involves the use of microorganisms. Efficient use of groundwater resources is necessary for sustainable development.

Bio-reductive synthesis of silver nanoparticles, its antibacterial efficiency, and possible toxicity in common carp fish (Cyprinus carpio).

The biological synthesis of nanoparticles is an emerging field of study that seeks to synthesize nanoparticles using non-chemical mechanisms such as microorganisms, plants, and animal blood serum. Among these, plants have gained particular attention due to their ease of handling, availability, and ability to synthesize a wide range of nanoparticles. Therefore, the current study aimed to fabricate the silver nanoparticles (AgNPs) using Chinese medicinal plants (CMP) for their possible toxicity in common carp fish (Cyprinus carpio). For this purpose, CMP was dried, ground, and used as a bio-reductive agent. The fabricated AgNPs were characterized and a well dispersed AgNPs were obtained. Moreover, the C. carpio was exposed to the AgNPs for bioaccumulation and histological alterations. The obtained findings revealed that the AgNPs were mostly accumulated in the intestines followed by the gills, muscles, liver, and brain. The accumulated AgNPs caused histological alterations in gills and intestines at the highest concentration (0.08 mg/L). However, very less alterations were caused by the lowest concentration, especially in the intestine. In conclusion, further in-depth research is needed to determine the risks associated with the usage of nanoparticles to reveal their harmful impacts on fish and the aquatic environment. HIGHLIGHTS: The biological fabrication of AgNPs is considered eco-friendly. Chinese medicinal plants play a significant role in AgNPs synthesis. AgNPs have excellent antibacterial activity. AgNPs are bioaccumulated in various organs of fish.

Emerging micropollutants in aquatic ecosystems and nanotechnology-based removal alternatives: A review.

There is a significant concern about the accessibility of uncontaminated and safe drinking water, a fundamental necessity for human beings. This concern is attributed to the toxic micropollutants from several emission sources, including industrial toxins, agricultural runoff, wastewater discharges, sewer overflows, landfills, algal blooms and microbiota. Emerging micropollutants (EMs) encompass a broad spectrum of compounds, including pharmaceutically active chemicals, personal care products, pesticides, industrial chemicals, steroid hormones, toxic nanomaterials, microplastics, heavy metals, and microorganisms. The pervasive and enduring nature of EMs has resulted in a detrimental impact on global urban water systems. Of late, these contaminants are receiving more attention due to their inherent potential to generate environmental toxicity and adverse health effects on humans and aquatic life. Although little progress has been made in discovering removal methodologies for EMs, a basic categorization procedure is required to identify and restrict the EMs to tackle the problem of these emerging contaminants. The present review paper provides a crude classification of EMs and their associated negative impact on aquatic life. Furthermore, it delves into various nanotechnology-based approaches as effective solutions to address the challenge of removing EMs from water, thereby ensuring potable drinking water. To conclude, this review paper addresses the challenges associated with the commercialization of nanomaterial, such as toxicity, high cost, inadequate government policies, and incompatibility with the present water purification system and recommends crucial directions for further research that should be pursued.

Deciphering the dysbiosis caused in the fish microbiota by emerging contaminants and its mitigation strategies-A review.

The primary barrier to nutrient absorption in fish is the intestinal epithelium, followed by a community of microorganisms known as the gut microbiota, which can be thought of as a hidden organ. The gastrointestinal microbiota of fish plays a key role in the upholding of overall health by maintaining the homeostasis and disease resistance of the host. However, emerging contaminants as the result of anthropogenic activities have significantly led to disruptions and intestinal dysbiosis in fish. Which probably results in fish mortalities and disrupts the balance of an ecosystem. Therefore, we comprehensively seek to compile the effects and consequences of emerging contaminations on fish intestinal microbiota. Additionally, the mitigation strategies including prebiotics, probiotics, plant-based diet, and Biofloc technology are being outlined. Biofloc technology (BFT) can treat toxic materials, i.e., nitrogen components, and convert them into a useful product such as proteins and demonstrated promising elevating technique for the fish intestinal bacterial composition. However, it remains unclear whether the bacterial isolate is primarily responsible for the BFT's removal of nitrate and ammonia and the corresponding removal mechanism. To answer this, real time polymerase chain reaction (RT-PCR) with metagenomics, transcriptomics, and proteomics techniques probably provides a possible solution.

Sources, distribution, associated health risks and remedial technologies for inorganic contamination in groundwater: A review in specific context of the state of Haryana, India.

Haryana is one of the leading states in India in the agricultural and industrial production. With the expansion of these sectors, a continuous increase in water demand is leading to water crises arising from overexploitation and quality deterioration of the available water. Contamination of aquifer resources is a significant concern, because majority of population depends on the groundwater for various agricultural, industrial, and domestic needs. This review article provides an overview of groundwater contamination, associated health risks with different contaminants with regions severely affected by poor water quality, and delves in identifying the sources, by observing and recognising the types of industries dominant in the state with types of effluents discharge. It further suggests the possible mitigation measures such as advanced remedial technologies and proper management practices from the consequent contamination sources. It has been observed during the perusal of various studies and data that the degree of contamination was considerably higher in districts with heavy agro-industrial activities. The groundwater resources in three highly industrialized districts were found to be gravely contaminated with toxic heavy metals. Alongwith heavy metals, the salinity, hardness, nitrate, and fluoride are also posing significant problems in the aquifer resources of Haryana state. The article also discusses various technologies for remediation of different pollutants from groundwater so it can be made potable after treatment.

Plastic Waste-Derived Carbon Dots: Insights of Recycling Valuable Materials Towards Environmental Sustainability.

Carbon dots (CDs) or carbon quantum dots (CQDs) have emerged as rising stars in the carbon family due to their diverse applications in various fields. CDs are spherical particles with a well-distributed size of less than 10 nm. Functional CDs are promising nanomaterials with low toxicity, low cost, and enormous applications in the field of bioimaging, optoelectronics, photocatalysis, and sensing. Plastic is non-biodegradable and hazardous to the environment, however extremely durable and used in abundance. During the COVID-19 pandemic, the use of plastic waste, particularly masks, goggles, face shields, and shoe cover, has increased tremendously. It needs to be recycled in a productive way as plastic wastes take hundreds or thousands of years to degrade naturally. The conversion of plastic waste into magnificent CDs has been reported as one of the key alternatives for environmental sustainability and socio-economic benefits. In this review, synthetic routes for the conversion of plastic wastes into CDs utilizing hydrothermal, solvothermal, pyrolysis, flash joule heating, and characterization of these CDs using different techniques, such as Fourier-transform infrared spectroscopy, Raman spectroscopy, X-ray diffraction, and transmission electron microscope, have been discussed. Furthermore, potential applications of these plastic-derived CDs in sensing, catalysis, agronomics, and LED lights are summarized herein.