Enhancing Flame-Retardant Properties of Polyurethane Aerogels Doped with Silica-Based Particles.

In this work, polyurethane (PUR) aerogels doped with different SiO2 particles, derived from a renewable source, were successfully synthesized, and the effects of SiO2 content on the properties of PUR aerogels were investigated. Specifically, three types of SiO2-based particles obtained from rice husk through different procedures were evaluated to enhance the thermal stability of the composites with special attention given to flame-retardant properties. With the optimal SiO2 particles, obtained through acid digestion, the influence of their content between 0.5 and 3 wt.% on the physicochemical characteristics of the synthesized aerogels was thoroughly examined. The results showed that increasing the doping agent content improved the lightness, thermal stability, and flame-retardant properties of the resulting PUR aerogels, with the best performance observed at a 2 wt.% doping level. The doped aerogel samples with non-modified SiO2 particles significantly enhanced the fire safety performance of the material, exhibiting up to an eightfold increase in flame retardancy. However, modification of the SiO2 particles with phytic acid did not slow down the combustion velocity when filling the aerogels. This research highlights the promising potential of doped PUR/SiO2 aerogels in advancing materials science and engineering applications for withstanding high temperatures and improving fire safety.

Biocompatibility Analysis of Bio-Based and Synthetic Silica Nanoparticles during Early Zebrafish Development.

During the twenty-first century, engineered nanomaterials (ENMs) have attracted rising interest, globally revolutionizing all industrial sectors. The expanding world population and the implementation of new global policies are increasingly pushing society toward a bioeconomy, focused on fostering the adoption of bio-based nanomaterials that are functional, cost-effective, and potentially secure to be implied in different areas, the medical field included. This research was focused on silica nanoparticles (SiO2-NPs) of bio-based and synthetic origin. SiO2-NPs are composed of silicon dioxide, the most abundant compound on Earth. Due to their characteristics and biocompatibility, they are widely used in many applications, including the food industry, synthetic processes, medical diagnosis, and drug delivery. Using zebrafish embryos as in vivo models, we evaluated the effects of amorphous silica bio-based NPs from rice husk (SiO2-RHSK NPs) compared to commercial hydrophilic fumed silica NPs (SiO2-Aerosil200). We evaluated the outcomes of embryo exposure to both nanoparticles (NPs) at the histochemical and molecular levels to assess their safety profile, including developmental toxicity, neurotoxicity, and pro-inflammatory potential. The results showed differences between the two silica NPs, highlighting that bio-based SiO2-RHSK NPs do not significantly affect neutrophils, macrophages, or other innate immune system cells.

Eosinophilic Variant of Granulomatosis With Polyangiitis.

Granulomatosis with polyangiitis (GPA) is a multisystemic necrotizing vasculitis with a special tropism to the respiratory tract and the kidneys. Although uncommon, GPA may be associated with hypereosinophilia and limited organ involvement. In these cases, American College of Rheumatology/European League Against Rheumatism (ACR/EULAR) classification criteria may be insufficient to establish the diagnosis. We described a limited form of GPA, hypereosinophilia, and predominant skin involvement.

Immune checkpoint inhibitor-induced endocrinopathies: a possible indicator of improved survival.

Objective: To evaluate the association between the patients' characteristics and the development of endocrine toxicity and to assess the association between endocrine-related adverse effects (ERAE) development and mortality. Subjects and methods: A retrospective observational study was conducted in 98 patients submitted to immunotherapy in our centre since its introduction in 2015 until March 2021. We excluded patients for which data regarding the corticotroph axis evaluation was missing. We used linear and logistic regression models to address our aims. Results: We observed a significant negative association between ERAE development and death (OR 0.32; p = 0.028). We detected no associations between ERAE and the following characteristics: age at immune checkpoint inhibitors (ICI) initiation, sex, diabetes mellitus, medical history, immunotherapy duration and ICI type. Conclusion: The development of an ERAE may be associated with a better overall survival rate in advanced oncologic disease, supporting the role of an unleashed immune system response to malignant cells.

Immune checkpoint inhibitor-induced endocrinopathies: a possible indicator of improved survival

ABSTRACT Objective: To evaluate the association between the patients' characteristics and the development of endocrine toxicity and to assess the association between endocrine-related adverse effects (ERAE) development and mortality. Subjects and methods: A retrospective observational study was conducted in 98 patients submitted to immunotherapy in our centre since its introduction in 2015 until March 2021. We excluded patients for which data regarding the corticotroph axis evaluation was missing. We used linear and logistic regression models to address our aims. Results: We observed a significant negative association between ERAE development and death (OR 0.32; p = 0.028). We detected no associations between ERAE and the following characteristics: age at immune checkpoint inhibitors (ICI) initiation, sex, diabetes mellitus, medical history, immunotherapy duration and ICI type. Conclusion: The development of an ERAE may be associated with a better overall survival rate in advanced oncologic disease, supporting the role of an unleashed immune system response to malignant cells.

Acylated-naproxen as the surface-active template in the preparation of micro- and nanospherical imprinted xerogels by emulsion techniques.

A strategy based on water-in-oil emulsion for the dispersion of a sol-gel mixture into small droplets was employed with the view of the production of naproxen-imprinted micro- and nanospheres. The procedure, aiming at a surface imprinting process, comprised the synthesis of a naproxen-derived surfactant. The imprinting process occurred at the interface of the emulsions or microemulsions, by the migration of the NAP-surfactant head into the sol-gel drops to leave surficial imprints due mainly to ion-pair interaction with a cationic group contained within the growing sol-gel network. The surface-imprinted microspheric particles exhibited a log-normal size distribution with geometric mean diameter of 3.1µm. A mesoporous texture was found from measurements of the specific surface area (206m(2)/g) and pore diameter (Dp 2nm). Evaluation of the microspheres as packed HPLC stationary phases resulted in the determination of the selectivity factor against ibuprofen (α=2.1), demonstrating the successful imprinting. Chromatographic efficiency, evaluated by the number of theoretical plates (222platescm(-3)), emerged as an outstanding feature among the set of all relatable formats produced before, an advantage intrinsic to the location of the imprinted sites on the surface. The material presented a capacity of 3.2µmolg(-1). Additionally, exploratory work conducted on their nanoscale counterparts resulted in the production of nanospheres in the size order of 10nm providing good indications of a successful imprinting process.

Measurement artifacts identified in the UV-vis spectroscopic study of adduct formation within the context of molecular imprinting of naproxen.

The ultraviolet-visible spectroscopy has been assessed as a technique for the evaluation of the strength of template-precursor adduct in the development of molecular imprints of the non-steroidal anti-inflammatory drug naproxen (NAP). The commonly employed approach relies on the collection of UV spectra of drug+precursor mixtures at different proportions, the spectra being recorded against blanks containing the same concentration of the precursor. The observation of either blue or red band-shifts and abatement of a major band are routinely attributed to template-precursor adduct formation. Following the described methodology, the precursors 1-(triethoxysilylpropyl)-3-(trimethoxysilylpropyl)-4,5-dihydroimidazolium iodide (AO-DHI(+)) and 4-(2-(trimethoxysilyl)ethyl)pyridine (PETMOS) provoked a blue-shift and band abatement effect on the NAP spectrum. Molecular dynamics simulations indicated a reasonable affinity between NAP and these precursors (coordination numbers 0.33 for AO-DHI(+) and 0.18 for PETMOS), hence showing that NAP-precursor complexation is in fact effective. However, time dependent density functional theory (TD-DFT) calculations of the spectra of both free and precursor-complexed NAP were identical, thus providing no theoretical basis for the complexation-induced effects observed. We realized that the intense spectral bands of AO-DHI(+) and PETMOS (at around 265 nm) superimpose partially with the NAP bands, and the apparent "blue-shifting" in the NAP spectra when mixed with AO-DHI+ and PETMOS was in this case a spurious effect of the intense background subtraction. Therefore, extreme care must be taken when interpreting other spectroscopic results obtained in a similar fashion.

Naproxen-imprinted xerogels in the micro- and nanospherical formsby emulsion technique.

Naproxen-imprinted xerogels in the microspherical and nanospherical forms were prepared by W/O emulsion and microemulsion, respectively. The work evolved from a sol­gel mixture previously reported for bulk synthesis. It was relatively simple to convert the original sol­gel mixture to one amenable to emulsion technique. The microspheres thus produced presented mean diameter of 3.7 µm, surface area ranging 220­340 m2/g, selectivity factor 4.3 (against ibuprofen) and imprinting factor 61. A superior capacity (9.4 µmol/g) was found, when comparing with imprints obtained from similar pre-gelification mixtures. However, slow mass transfer kinetics was deduced from column efficiency results. Concerning the nanospherical format, which constituted the first example of the production of molecularly imprinted xerogels in that format by microemulsion technique, adapting the sol­gel mixture was troublesome. In the end, nanoparticles with diameter in the order of 10 nm were finally obtained, exhibiting good indications of an efficient molecular imprinting process. Future refinements are necessary to solve serious aggregation issues, before moving to more accurate characterization of the binding characteristics or to real applications of the nanospheres.

Molecularly imprinted sol-gel materials for medical applications.

The present review deals with the sol-gel imprinting of both drug and non-drug templates of medical relevance, namely neurotransmitters, biomarkers, hormones, proteins and cells. Nearly a hundred recent works, either developmental or applied in a medical-related context, were critically analyzed. It may be concluded that, although research is still at an early stage, the potential of these sol-gel materials was well demonstrated in a few applications of critical interest for medicinal/biomedical science. The vast room left for expansion and improvement envisages a continuously growing interest by researchers in the future, eventually resulting in important medical applications able to enter the professional and consumer medical markets.

Synthesis of glycylglycine-imprinted silica microspheres through different water-in-oil emulsion techniques.

Sol-gel molecularly imprinted materials (MIMs) are traditionally obtained by grinding and sieving of a monolith formed by bulk polymerization. However, this process has several drawbacks that can be overcome if these materials are synthesized directly in the spherical format. This work aimed at the development of two efficient methods to prepare spherical glycylglycine-templated silica ("whole-imprinted" and surface-imprinted) through a combination of sol-gel and emulsion techniques. The synthesis of the microspheres was optimized regarding emulsion and sol-gel parameters. Imprinting efficiency of the prepared materials was studied by solid phase extraction and flow microcalorimetry. The particles prepared with glycylglycine and functional monomer, in basic medium (using cyclohexane as non-polar continuous medium) presented the highest imprinting factor - 2.5 - and the respective surface-imprinted material presented an imprinting factor of 1.5. The results of flow microcalorimetry confirmed the action of different mechanisms of glycylglycine adsorption: entropically-controlled interactions were present for the "whole-imprinted" material, indicating adsorption inside small imprinted pores; enthalpically-controlled interactions were observed for the surface-imprinted material, a behaviour more compatible with a template/surface-only interaction. Globally, the two approaches allowed for a successful imprinting effect which was more extensive for the "whole-imprinted" material, whereas the surface-imprinting feature confers to the surface-imprinted xerogel advantages regarding mass transfer kinetics. Overall, the spherical particles obtained by both approaches presented characteristics, such as sphericity, mesoporosity, easy/fast accessibility to imprinted sites, important indicators that these materials may be candidates for stationary phases for efficient, selective chromatographic separation.

Solid-phase microextraction Ni-Ti fibers coated with functionalised silica particles immobilized in a sol-gel matrix.

One of the possible approaches for the development of novel solid-phase microextraction (SPME) fibers is the physical deposition of porous materials onto a support using high-temperature epoxy glue. However, a major drawback arises from decomposition of epoxy glue at temperatures below 300 degrees C and instability in some organic solvents. This limitation motivated us to explore the possibility of replacing the epoxy glue with a sol-gel film, thermally more stable and resistant to organic solvents. We found that functionalised silica particles could be successfully attached to a robust Ni-Ti wire by using a UV-curable sol-gel film. The particles were found to be more important than the sol-gel layer during the microextraction process, as shown by competitive extraction trials and by the different extraction profiles observed with differently functionalised particles. If a quality control microscopic-check aiming at the rejection of fibers exhibiting unacceptably low particle load was conducted, acceptable (6-14%) reproducibility of preparation of C(18)-silica fibers was observed, and a strong indication of the durability of the fibers was also obtained. A cyclohexyldiol-silica fiber was used, as a simple example of applicability, for the successful determination of benzaldehyde, acetophenone and dimethylphenol at trace level in spiked tap water. Recoveries: 95-109%; limits of detection: 2-7 microg/L; no competition effects within the studied range (