ABSTRACT
The toxic Cr(VI) from industrial wastewater pose serious threat to the human beings and eco-systems. To reduce the operation processes and enhance the removal efficiency of Cr(VI), targeted design of functionalized material is critical in practical applications. Herein, we developed a one-step strategy for simultaneous Cr(VI) reduction and total Cr capture by a novel phytate modified zero-valent iron (PA-ZVI). The reaction kinetics of Cr(VI) removal by PA-ZVI (0.2225 min-1) was 53 times higher compared to ZVI (0.0042 min-1). The Fe(0) content on the surface of PA-ZVI increased from 2.2% to 15.6% compared to ZVI. Meanwhile, Cr(VI) was liable to adsorb on the surface of PA-ZVI due to its lower adsorption energy compared with the original ZVI (-2.09 eV vs -0.85 eV). The incorporation of the phytate ligand promoted electron transfer from iron core to Cr(VI), leading to the rapid in-situ reduction of Cr(VI) adsorbed on the surface of PA-ZVI to Cr(III). PA-ZVI exhibited a satisfactory performance for Cr(VI) removal at a broad pH range (3-11) and in the presence of coexisting ions and humic acid. Moreover, the reactor with the addition of PA-ZVI achieved more than 90% Cr(VI) removal within 72 h in continuous flow experiments. The feasibility of PA-ZVI for the removal of Cr(VI) is also validated in authentic wastewater. This work provides novel ZVI materials that can effectively address decontamination challenges from Cr(VI) pollution.
ABSTRACT
Triclocarban (TCC), one of the typical antimicrobial agents, is a contaminant of emerging concern commonly found in high concentration in water environments. However, the fate and toxicity of TCC in wastewater treatment systems remain poorly understood. Here, we investigated how TCC impacts chemical oxygen demand and inorganic nitrogen transformation in a hydrolytic anaerobic-anoxic/oxic process. In the anaerobic section, the transformation of TCC was dominated by reductive dechlorination and supplemented by two amid bonds hydrolysis. In the anoxic and oxic sections, the hydrolysis of amid bonds dominated. The toxicity was reduced after the treatment (IC50 from 0.09 to 0.54). TCC inhibited NH4+-N removal in the anaerobic section and led to the NO3--N accumulation (2.84-4.13 mg/L) after treatment, with the abundance of N-removal bacteria decreased by 6%. Furthermore, the original ecological niche was gradually replaced by TCC-resistant/degradative bacteria, formating new microbial modules to resist the TCC stress. Importantly, fourteen genera including Methanosaeta, Longilinea, Dokdonella and Mycobacterium as potential bioindicators warning TCC and its intermediates were proposed. Overall, this study provides new insights into the fate of TCC in biological wastewater treatment systems and suggests a great importance for TCC control to ensure the health and resilience of ecosystems.
Subject(s)
Anti-Infective Agents , Carbanilides , Microbiota , Water Pollutants, Chemical , Water Purification , Carbanilides/analysis , Environmental Biomarkers , Nitrogen , Water , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/toxicityABSTRACT
Bisphenols (BPs) are distributed in worldwide as typical environmental hormones, which potentially harm the ecological environment and human health. In this study, four BPs, i.e., bisphenol A, bisphenol F, bisphenol S, and bisphenol AF, were used as prototypes to identify the intrinsic differences in degradation mechanisms correlated with the molecular structures in peroxydisulfate (PDS)-based advanced oxidation processes (AOPs). Electron transfer was the main way of modified biochar to trigger the heterogenous catalysis of PDS, which can cause the degradation of BPs. Phenolic hydroxyl groups on bisphenol pollutants were considered as possible active sites, and the existence of substituents was the main reason for the differentiation in the degradation efficiency of various bisphenols. Results of ecotoxicity prediction showed that most intermediates produced by the degradation of BPs in the ß-SB/PDS system, which was dominated by the electron transfer pathway, had a lower toxicity than the parent molecules, while the toxicity of several ring cleavage intermediates was higher. This study presents a simple modification scheme for the conversion of biochar into functional catalysts and provides insights into the mechanism of heterogeneous catalytic degradation mediated by modified biochar as well as the degradation differences of bisphenol pollutants and their potential ecotoxicity.
Subject(s)
Benzhydryl Compounds , beta-Cyclodextrins , Benzhydryl Compounds/toxicity , Catalysis , Charcoal , Humans , PhenolsABSTRACT
In this study, a bioflocculation method assisted by fungal pellets was developed for highly efficient microalgae harvesting. Effects of critical parameters, including flocculation type, temperature, rotation speed and initial pH, on the bioflocculation of fungal Aspergillus niger for microalgae Scenedesmus sp. were investigated. Results showed that the maximum flocculation efficiency of 99.4% was obtained when the fungal pellets were inoculated in the algal solution at the initial pH of 8.0, temperature of 30 °C and rotation speed of 160 rpm for 48 h in BG-11 medium. Furthermore, microscopy examination, scanning electron microscopy, Fourier transform infrared spectroscopy, Zeta potential measurement and three-dimensional excitation emission matrix fluorescence spectroscopy were used to explore the mechanism of bioflocculation process. It was found that the interaction of fungi and microalgae was related to the surface functional groups of fungal pellets. This study provides a interpretation of conceivable mechanism for microalgal bioflocculation by fungal pellets.
Subject(s)
Microalgae , Scenedesmus , Biomass , Flocculation , FungiABSTRACT
BACKGROUND: Microalgae as a viable biodiesel feedstock show great potential to approach the challenges of energy shortage and environment pollution, but their economic feasibility was seriously hampered by high production cost. Thus, it is in urgent need to reduce the cost of cultivation and improve the biomass and lipid production of microalgae. In this work, anaerobic digestion effluent from cattle manure combined with municipal wastewater was used as a cost-effective medium for cultivating microalgae and expected to obtain high biomass. The pretreatment of anaerobic digested effluent containing dilution rate, sterilization and nutrient optimization was investigated. Then, initial pH and light intensity for algal growth, lipid production and wastewater purification were optimized in this study. RESULTS: Scenedesmus sp. could grow rapidly in 10% anaerobic digestion effluent from cattle manure combined with secondary sedimentation tank effluent without sterilization. Optimum nutrient additives for higher biomass were as follows: glucose 10 g/L, NaNO3 0.3 g/L, K2HPO4·3H2O 0.01 g/L, MgSO4·7H2O 0.075 g/L and trace element A5 solution 1 mL/L. Biomass of 4.65 g/L and lipid productivity of 81.90 mg/L/day were achieved during 7-day cultivation accompanying over 90% of COD, NO3 --N, NH4 +-N, and 79-88% of PO4 3--P removal with optimized initial pH of 7.0 and light intensity of 5000 l×. The FAME profile in ADEC growth medium consisted in saturated (39.48%) and monounsaturated (60.52%) fatty acids with the 16- to 18-chain-length fatty acids constituting over 98% of total FAME. CONCLUSIONS: This study proves the potential of anaerobic digested effluent combined with municipal wastewater for microalgae culture, and provides an effective avenue for simultaneous microalgal lipid production and treatment of two kinds of wastewater.
ABSTRACT
BACKGROUND: Simultaneous wastewater treatment and lipid production by oleaginous microalgae show great potential to alleviate energy shortage and environmental pollution, because they exhibit tremendous advantages over traditional activated sludge. Currently, most research on wastewater treatment by microalgal are carried out at optimized temperature conditions (25-35 °C), but no information about simultaneous wastewater treatment and lipid production by microalgae at low temperatures has been reported. Microalgal growth and metabolism will be inhibited at low temperature conditions, and satisfactory wastewater treatment performance will be not obtained. Therefore, it is critical to domesticate and screen superior microalgal strains with low temperature adaptability, which is of great importance for wastewater treatment and biodiesel production. RESULTS: In this work, simultaneous wastewater treatment and lipid production were achieved by a microalgal mutant Scenedesmus sp. Z-4 at the low temperature conditions (4, 10, and 15 °C). The results showed that algal growth was inhibited at 4, 10, and 15 °C compared to that at the optimal temperature of 25 °C. However, decreased temperature had no significant effect on the total cellular lipid content of algae. Importantly, lipid productivity at 10 °C was compromised by more net energy output relevant to biodiesel production, which demonstrated that the low temperature of 10 °C was favorable to wastewater treatment and energy recovery by Scenedesmus sp. Z-4. When molasses wastewater with optimal COD concentration of 8000 mg L-1, initial inoculation ratio of 15%, and C/N ratio of 15 was used to cultivate microalgae, the maximum removal rate of COD, TN, and TP at 10 °C reached 87.2, 90.5, and 88.6%, respectively. In addition, lipid content of 28.9% and lipid productivity of 94.4 mg L-1 day-1 were obtained. CONCLUSIONS: Scenedesmus sp. Z-4 had good adaptability to low temperature conditions, and showed great potential to realize simultaneous wastewater treatment and lipid production at low temperatures. The proposed approach in the study was simple compared to other wastewater treatment methods, and this potential novel process was still efficient to remove COD, N, and P at low temperatures. Thus, it had a vital significance for the wastewater treatment in low temperature regions.