ABSTRACT
HYPOTHESIS: The milder interaction with biosystems makes the zwitterionic surfactants an important class of surfactants, and they are widely used in biological applications and in personal care formulations. An important aspect of those applications is their strong synergistic interaction with anionic surfactants. It is anticipated that the strong interaction will significantly affect the adsorption and self-assembly properties. EXPERIMENTS: Surface tension, ST, neutron reflectivity, NR, and small angle neutron scattering, SANS, have been used here to explore the synergistic mixing in micelles and at the air-water interface for the zwitterionic surfactant, dodecyldimethylammonium propanesulfonate, C12SB, and the anionic surfactants, alkyl ester sulfonate, AES, in the absence and presence of electrolyte, 0.1 M NaCl. FINDINGS: At the air-water interface the asymmetry of composition in the strong synergistic interaction and the changes with added electrolyte and anionic surfactant structure reflect the relative contributions of the electrostatic and steric interactions to the excess free energy of mixing. In the mixed micelles the synergy is less pronounced and indicates less severe packing constraints. The micelle structure is predominantly globular to elongated, and shows a pronounced micellar growth with composition which depends strongly upon the nature of the anionic surfactant and the addition of electrolyte.
Subject(s)
Micelles , Water , Static Electricity , Surface Tension , Surface-Active AgentsABSTRACT
Although surfactants have been widely used in skin care and other related applications, our knowledge about how surfactants interact with stratum corneum (SC) lipids remains limited. This work reports how surfactants interact with a lipid SC model by neutron diffraction and molecular dynamics (MD) simulations, focusing on examining the impact of surfactant molecular architecture. The surfactant-SC mixed membrane was constructed by an equimolar mixture of ceramide/cholesterol/fatty acids and surfactant at 1% molar ratio of total lipids. The arrangements of water and surfactant molecules in the membrane were obtained through neutron scattering length density (NSLD) profiles via contrast variation method, meanwhile, MD simulation clearly demonstrated the mechanism of hydration change in the surfactant-model SC mixed membrane. No drastic difference was detected in the repeating distance of the short periodicity phase (SPP) upon adding surfactants, however, it significantly enhanced the membrane hydration and reduced the amount of phase separated crystalline cholesterol, showing a strong dependence on surfactant chain length, branching and double bond. This work clearly demonstrates how surfactant architecture affects its interaction with the SC membrane, providing useful guidance for either choosing an existing surfactant or designing a new one for surfactant-based transdermal application.
Subject(s)
Skin , Surface-Active Agents , Ceramides , Epidermis , LipidsABSTRACT
The formation of surface multilayer structures, induced by the addition of multivalent counterions in dilute surfactant solutions, has been widely observed in a range of anionic surfactants. The phenomenon is associated with the ability to manipulate surface properties, especially in the promotion of enhanced surface wetting, and in the presence of an extensive near surface reservoir for rapid surface delivery of surfactant and other active components. HYPOTHESIS: In the single alkyl chain anionic surfactants, such as sodium dodecysulfate, SDS, sodium alkylethoxylsulfate, SAES, and alkylestersulfonate, AES, surface multilayer formation is promoted by trivalent counterions such as Al3+, and is generally not observed with divalent counterions, such as Ca2+ or with monovalent counterions. In the di-alkyl chain anionic surfactant, dodecylbenzenesulfonate, LAS, surface multilayer formation now occurs in the presence of divalent counterions. It is attributed to the closer proximity of a bulk lamellar phase, resulting in a greater tendency for surface multilayer formation, and hence should occur in other di-alkyl chain anionic surfactants. EXPERIMENTS: Aerosol-OT, AOT, is one of the most commonly used di-alkyl chain anionic surfactants, and is extensively used as an emulsifying, wetting and dispersing agent. This paper reports on predominantly neutron reflectivity, NR, measurements which explore the nature of surface multilayer formation of the sodium salt of AOT at the air-solution interface with the separate addition of Ca2+ and Al3+ counterions. FINDINGS: In the AOT concentration range 0.5 to 2.0 mM surface multilayer formation occurs at the air-solution interface with the addition of Ca2+ or Al3+ counterions. Although the evolution in the surface structure with surfactant and counterion concentration is broadly similar to those reported for SDS, SAES and AES, some notable differences occur. In particular the surfactant and counterion concentration thresholds for surface multilayer formation are higher for Ca2+ than for Al3+. The differences encountered reflect the greater affinity of the di-alkyl chain structure for lamellar formation, and how the surface packing is controlled in part by the headgroup structure and the associated counterion binding affinity.
ABSTRACT
HYPOTHESIS: The α-sulfo alkyl ester, AES, surfactants are a class of anionic surfactants which have potential for improved sustainable performance in a range of applications, and an important feature is their enhanced tolerance to precipitation in the presence of multivalent counterions. It is proposed that their adsorption properties can be adjusted substantially by changing the length of the shorter alkyl chain, that of the alkanol group in the ester. EXPERIMENTS: Surface tension and neutron reflectivity have been used to investigate the variation in the adsorption properties with the shorter alkyl chain length (methyl, ethyl and propyl), the impact of NaCl on the adsorption, the tendency to form surface multilayer structures in the presence of AlCl3, and the effects of mixing the methyl ester sulfonate with the ethyl and propyl ester sulfonates on the adsorption. FINDINGS: The variations in the critical micelle concentration, CMC, the adsorption isotherms, the saturation adsorption values, and the impact of NaCl illustrate the subtle influence of varying the shorter alkyl chain length of the surfactant. The non-ideal mixing of pairs of AES surfactants with different alkanol group lengths of the ester show that the extent of the non-ideality changes as the difference in the alkanol length increases. The surface multilayer formation observed in the presence of AlCl3 varies in a complex manner with the length of the short chain and for mixtures of surfactants with different chains lengths.
ABSTRACT
The formation of surface multilayer structures, with the addition of multivalent electrolytes, has been observed in a range of different anionic surfactants; and notably the sodium oxyethylene glycol alkyl sulfate, SAES, and alkyl ester sulfonate, AES, surfactants. The addition of increasing amounts of AlCl3 results in increasing surface layering, with a transition from monolayer to bilayer to ultimately more extended multilayer structures at the interface. The headgroup structures of these SAES and AES surfactants and their hydrophilic / hydrophobic balance give a degree of tolerance to the precipitation induced by multivalent counterions. This was considered to be important factor associated with the multivalent counterion induced surface layering. In this paper the impact of sodium dodecyl sulfate, SDS, an anionic surfactant more susceptible to precipitation in the presence of multivalent counterions, on the surface multilayer formation and solution self-assembly of sodium diethylene glycol monododecyl sulfate, SLES, is explored using surface tension, neutron reflectivity and small angle neutron scattering. The results show that SDS exhibits a similar progressive evolution in surface structures with increasing AlCl3 concentrations, as observed in SLES and related SAES surfactants, and in MES, sodium methyl ester dodecyl sulfonate surfactant. However in the SLES / SDS mixtures the structural evolution is different, and more complex pattern with increasing AlCl3 concentration is observed. The initial transition from monolayer to bilayer / trilayer structures exists, but the surface at higher AlCl3 concentration reverts to monolayer adsorption before extended multilayer structures are formed. Complementary small angle neutron scattering measurements indicate a more complex evolution in the micelle structure which broadly correlates with the surface behaviour. The results illustrate how subtle changes in headgroup structure and packing affect relative counterion binding and hence the surface and solution structures. The results reinforce and extend the observations of related structures on different SAES and AES surfactants, and highlight the opportunity for manipulating surface adsorption behaviour with surfactant mixtures.
ABSTRACT
Neutron reflectivity, NR, and surface tension, ST, have been used to study the surface adsorption properties at the air-water interface of the anionic surfactant sodium polyethylene glycol monododecyl ether sulfate (sodium lauryl ether sulfate, SLES) in the presence of Al(3+) multivalent counterions, by the addition of AlCl3. In the absence of AlCl3 and at low AlCl3 concentrations monolayer adsorption is observed. With increasing AlCl3 concentration, surface multilayer formation is observed, driven by SLES/Al(3+) complex formation. The onset of multilayer formation occurs initially as a single bilayer or a multilayer structure with a limited number of bilayers, N, ≤3, and ultimately at higher AlCl3 concentrations N is large, >20. The evolution in the surface structure is determined by the surfactant and AlCl3 concentrations, and the size of the polyethylene oxide group in the different SLES surfactants studied. From the NR data, approximate surface phase diagrams are constructed, and the evolution of the surface structure with surfactant and electrolyte concentration is shown to be dependent on the size of the polyethylene oxide group. As the polyethylene oxide group increases in size the multilayer formation requires increasingly higher surfactant and AlCl3 concentrations to promote the formation. This is attributed to the increased steric hindrance of the polyethylene oxide group disrupting SLES/Al(3+) complex formation.
Subject(s)
Aluminum Compounds/chemistry , Chlorides/chemistry , Polyethylene Glycols/chemistry , Surface-Active Agents/chemistry , Air , Aluminum Chloride , Particle Size , Solutions , Surface Properties , Water/chemistryABSTRACT
The impact of Ca(2+) counterions on the adsorption at the air-water interface and self-assembly in aqueous solution of the rhamnolipid biosurfactant and its mixture with the anionic surfactant sodium dodecylbenzenesulfonate, LAS, has been studied using neutron reflectometry and small-angle neutron scattering. The results illustrate how rhamnolipids are calcium tolerant and how their blending with conventional anionic surfactants improves the calcium tolerance of the anionic surfactant. Ca(2+) has relatively little effect upon the adsorption and self-assembly of the monorhamnose, R1, and dirhamnose, R2, rhamnolipids, even at high pH, due to their predominantly nonionic nature. For R1/R2 mixtures the addition of Ca(2+) has little impact upon the adsorbed amount or the surface composition. For R2/LAS mixtures the addition of Ca(2+) results in an increased adsorption and a surface slightly richer in R2. The weak binding of Ca(2+) to R1 and R2 does result in a change to the degree of ionization of the micelles and especially for mixed R1/R2 micelles at R1-rich solution compositions. The stronger binding of Ca(2+) to LAS results in the addition of Ca(2+) having a much greater impact on the self-assembly of R1/LAS and R2/LAS mixtures. For R1/LAS mixtures the addition of Ca(2+) promotes the formation of more planar structures, even at low surfactant concentrations where in the absence of Ca(2+) mixed globular micelle formation dominates. In R2/LAS mixtures, where there is a greater contrast between the high and low preferred curvatures associated with R2 and LAS, the addition of Ca(2+) results in a more complex evolution in micellar aggregation and the degree of ionization of the micelles. This results in variations in Ca(2+) binding that promotes micellar structures in which a spatial segregation of the two surfactant components within the micelle occurs.
Subject(s)
Benzenesulfonates/chemistry , Calcium/chemistry , Glycolipids/chemistry , Rhamnose/chemistry , Surface-Active Agents/chemistry , Adsorption , Air , Cations, Divalent , Hydrogen-Ion Concentration , Micelles , Molecular Conformation , Solutions , Surface Tension , WaterABSTRACT
The effect of polymer molecular weight and solution pH on the surface properties of the anionic surfactant sodium dodecylsulfate, SDS, and a range of small linear poly(ethyleneimine), PEI, polyelectrolytes of different molecular weights has been studied by surface tension, ST, and neutron reflectivity, NR, at the air-solution interface. The strong SDS-PEI interaction gives rise to a complex pattern of ST behavior which depends significantly on solution pH and PEI molecular weight. The ST data correlate broadly with the more direct determination of the surface adsorption and surface structure obtained using NR. At pH 3, 7, and 10, the strong SDS-PEI interaction results in a pronounced SDS adsorption at relatively low SDS and PEI concentrations, and is largely independent of pH and PEI molecular weight (for PEI molecular weights on the order of 320, 640, and 2000 Da). At pH 7 and 10, there are combinations of SDS and PEI concentrations for which surface multilayer structures form. For the PEI molecular weights of 320 and 640 Da, these surface multilayer structures are most well-developed at pH 10 and less so at pH 7. At the molecular weight of 2000 Da, they are poorly developed at both pH 7 and 10. This evolution in the surface structure with molecular weight is consistent with previous studies, (1) where for a molecular weight of 25,000 Da no multilayer structures were observed for the linear PEI. The results show the importance with increasing polymer molecular weight of the entropic contribution due to the polymer flexibility in control of the surface multilayer formation.
Subject(s)
Polyethyleneimine/chemistry , Sodium Dodecyl Sulfate/chemistry , Electrolytes/chemistry , Hydrogen-Ion Concentration , Molecular Structure , Molecular Weight , Solutions , Surface PropertiesABSTRACT
The impact of ethyleneimine architecture on the adsorption behavior of mixtures of small poly(ethyleneimines) and oligoethyleneimines (OEIs) with the anionic surfactant sodium dodecylsulfate (SDS) at the air-solution interface has been studied by surface tension (ST) and neutron reflectivity (NR). The strong surface interaction between OEI and SDS gives rise to complex surface tension behavior that has a pronounced pH dependence. The NR data provide more direct access to the surface structure and show that the patterns of ST behavior are correlated with substantial OEI/SDS adsorption and the spontaneous formation of surface multilayer structures. The regions of surface multilayer formation depend upon SDS and OEI concentrations, on the solution pH, and on the OEI architecture, linear or branched. For the linear OEIs (octaethyleneimine, linear poly(ethyleneimine) or LPEI(8), and decaethyleneimine, LPEI(10)) with SDS, surface multilayer formation occurs over a range of OEI and SDS concentrations at pH 7 and to a much lesser extent at pH 10, whereas at pH 3 only monolayer adsorption occurs. In contrast, for branched OEIs BPEI(8) and BPEI(10) surface multilayer formation occurs over a wide range of OEI and SDS concentrations at pH 3 and 7, and at pH 10, the adsorption is mainly in the form of a monolayer. The results provide important insight into how the OEI architecture and pH can be used to control and manipulate the nature of the OEI/surfactant adsorption.
ABSTRACT
This article describes the behavior under elongational flow of mixtures of lamellar fragments and platelike colloidal particles. Mixtures of a dialkyl chain cationic surfactant, DHTAC (15 wt %), and the nonionic surfactant Brij 97 (0.5 wt %) form dispersions of lamellar phase fragments, and these were studied in the presence of smaller platelike colloidal particles of Ni(OH)(2) stabilized with sodium polyacrylate. Small-angle neutron scattering was used to follow the changes in the lamellar phase fragments in the mixture under elongational flow. The addition of a small fraction of the Ni(OH)(2) dispersion resulted in significantly increased viscosity and reduced the structure and size of the lamellar fragments, and this effect was further enhanced because of the flow induced alignment. The behavior of the mixture under elongational flow is described, and the induced orientation is discussed in terms of order parameters at the different positions using spatially resolved small-angle scattering. The effect of flow rate on the orientational alignment in the mixture is also described.
ABSTRACT
The self-assembly in aqueous solution of the acidic (AS) and lactonic (LS) forms of the sophorolipid biosurfactant, their mixtures, and their mixtures with anionic surfactant sodium dodecyl benzene sulfonate, LAS, has been studied using predominantly small-angle neutron scattering, SANS, at relatively low surfactant concentrations of <30 mM. The more hydrophobic lactonic sophorolipid forms small unilamellar vesicles at low surfactant concentrations, in the concentration range of 0.2 to 3 mM, and transforms via a larger unilamellar vesicle structure at 7 mM to a disordered dilute phase of tubules at higher concentrations, 10 to 30 mM. In marked contrast, the acidic sophorolipid is predominantly in the form of small globular micelles in the concentration range of 0.5 to 30 mM, with a lower concentration of larger, more planar aggregates (lamellar or vesicular) in coexistence. In mixtures of AS and LS, over the same concentration range, the micellar structure associated with the AS sophorolipid dominates the mixed-phase behavior. In mixtures of anionic surfactant LAS with the AS sophorolipid, the globular micellar structure dominates over the entire composition and concentration range studied. In contrast, mixtures of LAS with the LS sophorolipid exhibit a rich evolution in phase behavior with solution composition and concentration. At low surfactant concentrations, the small unilamellar vesicle structure present for LS-rich solution compositions evolves into a globular micelle structure as the solution becomes richer in LAS. At higher surfactant concentrations, the disordered lamellar structure present for LS-rich compositions transforms to small vesicle/lamellar coexistence, to lamellar/micellar coexistence, to micellar/lamellar coexistence, and ultimately to a pure micellar phase as the solution becomes richer in LAS. The AS sophorolipid surfactant exhibits self-assembly properties similar to those of most other weakly ionic or nonionic surfactants that have relatively large headgroups. However, the more hydrophobic nature of the lactonic sophorolipid results in a more complex and unusual evolution in phase behavior with concentration and with concentration and composition when mixed with anionic surfactant LAS.
Subject(s)
Benzenesulfonates/chemistry , Glycolipids/chemistry , Surface-Active Agents/chemistry , Acetylation , Solutions , Surface TensionABSTRACT
The adsorption of the lactonic (LS) and acidic (AS) forms of sophorolipid and their mixtures with the anionic surfactant sodium dodecyl benzene sulfonate (LAS) has been measured at the air/water interface by neutron reflectivity, NR. The AS and LS sophorolipids adsorb with Langmuir-like adsorption isotherms. The more hydrophobic LS is more surface active than the AS, with a lower critical micellar concentration, CMC, and stronger surface adsorption, with an area/molecule â¼70 Å(2) compared with 85 Å(2) for the AS. The acidic sophorolipid shows a maximum in its adsorption at the CMC which appears to be associated with a mixture of different isomeric forms. The binary LS/AS and LS/LAS mixtures show a strong surface partitioning in favor of the more surface active and hydrophobic LS component but are nevertheless consistent with ideal mixing at the interface. In contrast, the surface composition of the AS/LAS mixture is much closer to the solution composition, but the surface mixing is nonideal and can be accounted for by regular solution theory, RST. In the AS/LS/LAS ternary mixtures, the surface adsorption is dominated by the sophorolipid, and especially the LS component, in a way that is not consistent with the observations for the binary mixtures. The extreme partitioning in favor of the sophorolipid for the LAS/LS/AS (1:2) mixtures is attributed to a reduction in the packing constraints at the surface due to the AS component. Measurements of the surface structure reveal a compact monolayer for LS and a narrow solvent region for LS, LS/AS, and LS/LAS mixtures, consistent with the more hydrophobic nature of the LS component. The results highlight the importance of the relative packing constraints on the adsorption of multicomponent mixtures, and the impact of the lactonic form of the sophorolipid on the adsorption of the sophorolipid/LAS mixtures.
Subject(s)
Air , Benzenesulfonates/chemistry , Glycolipids/chemistry , Surface-Active Agents/chemistry , Water/chemistry , Acetylation , Adsorption , Micelles , Neutron Diffraction , Surface TensionABSTRACT
Small-angle neutron scattering, SANS, has been used to study the alignment of a sterically stabilized colloidal dispersion of nickel hydroxide induced by elongational flow. Two different concentrations, 20 and 23 wt %, of well-defined hexagonal platelets have been studied. Significant anisotropy in the scattering patterns has been observed for the higher concentration dispersion that increases with increasing elongational strain rate. The effect of pipe flow (shear flow) on the orientational ordering at the inlets is also described. Near the outlets there is also a shear stress and this tends to increase the alignment. The orientational distribution of the particles under flow is described in terms of an order parameter calculated with respect to an individual director for each scattering pattern. The experimental measurements are supported by comparison with computer simulations which help to explain the effects of local velocity on the alignment induced by elongational flow. A slight decrease in the observed alignment was found after continuous flow for approximately 30 min and possible reasons are discussed.
ABSTRACT
The impact of multivalent counterions, Al(3+), on the surface adsorption and self-assembly of the anionic surfactant sodium dodecyl dioxyethylene sulfate, SLES, and the anionic/nonionic surfactant mixtures of SLES and monododecyl dodecaethylene glycol, C(12)E(12), has been investigated using neutron reflectivity, NR, and small angle neutron scattering, SANS. The addition of relatively low concentrations of Al(3+) counterions induces a transition from a monolayer to well-defined surface bilayer, trilayer, and multilayer structures in the adsorption of SLES at the air-water interface. The addition of the nonionic cosurfactant, C(12)E(12), partially inhibits the evolution in the surface structure from monolayer to multilayer interfacial structures. This surface phase behavior is strongly dependent upon the surfactant concentration, solution composition, and concentration of Al(3+) counterions. In solution, the addition of relatively low concentrations of Al(3+) ions promotes significant micellar growth in SLES and SLES/C(12)E(12) mixtures. At the higher counterion concentrations, there is a transition to lamellar structures and ultimately precipitation. The presence of the C(12)E(12) nonionic cosurfactant partially suppresses the aggregate growth. The surface and solution behaviors can be explained in terms of the strong binding of the Al(3+) ions to the SLES headgroup to form surfactant-ion complexes (trimers). These results provide direct evidence of the role of the nonionic cosurfactant in manipulating both the surface and solution behavior. The larger EO(12) headgroup of the C(12)E(12) provides a steric hindrance which disrupts and ultimately prevents the formation of the surfactant-ion complexes. The results provide an important insight into how multivalent counterions can be used to manipulate both solution self-assembly and surface properties.
ABSTRACT
The coadsorption of human milk lactoferrin into a spread monolayer of dipalmitoylglycerol phosphatidylcholine (DPPC) at the air/water interface has been studied by neutron reflection. The system is a good model of the preocular tear film outer interface, which was the motivation for the study. The association of the protein with the surface was indicated by an increase of the surface pressure exerted by the DPPC monolayer. The extent of lactoferrin coadsorption was found to decrease with increasing surface pressure in the lipid monolayer, a trend consistent with the observation reported for other proteins, such as lysozyme and beta-lactoglobulin. The neutron reflectivity measurements were subsequently carried out at the three surface pressures of 8, 15, and 35 mN/m to examine the structure and composition of lactoferrin coadsorbed at the interface. Whereas the DPPC monolayer effectively prevented lactoferrin insertion at the high surface pressure, a measurable amount of lactoferrin was found at the air/water interface at the two lower surface pressures. At 15 mN/m it was difficult to identify the distribution of lactoferrin with respect to the DPPC monolayer, due to its relatively low adsorbed amount and much broader distribution. At the lowest surface pressure of 8 mN/m, the lactoferrin coadsorption was found to increase with time over the first few hours. After 5 h the distribution of the lactoferrin layer became similar to, though quantitatively lower than, that adsorbed in the absence of the DPPC monolayer. It is characterized by a top dense sublayer of 15 A with a bottom diffuse sublayer of 60 A, indicating structural unfolding induced by surface adsorption under these conditions.
Subject(s)
1,2-Dipalmitoylphosphatidylcholine/chemistry , Lactoferrin/chemistry , Milk, Human/chemistry , Unilamellar Liposomes/chemistry , Air , Humans , Surface Tension , WaterABSTRACT
Conformational orientations of a mouse monoclonal antibody to the beta unit of human chorionic gonadotrophin (anti-beta-hCG) at the hydrophilic silicon oxide/water interface were investigated using atomic force microscopy (AFM) and neutron reflectivity (NR). The surface structural characterization was conducted with the antibody concentration in solution ranging from 2 to 50 mg.L(-1) with the ionic strength kept at 20 mM and pH = 7.0. It was found that the antibody adopted a predominantly "flat-on" orientation, with the Fc and two Fab fragments lying flat on the surface. The AFM measurement revealed a thickness of 30-33 A of the layer formed in contact with 2 mg.L(-1) antibody in water, but, interestingly, the flat-on antibody molecules formed small nonuniform clusters equivalent to 2-15 antibody molecules. Parallel AFM scanning in air revealed even larger surface clusters, suggesting that surface drying induced further aggregation. The AFM study thus demonstrated that the interaction between protein and the hydrophilic surface is weak and indicated that surface aggregation can be driven by the attraction between neighboring protein molecules. NR measurements at the solid/water interface confirmed the flat-on layer orientation of adsorbed molecules over the entire concentration range studied. Thus, at 2 mg.L(-1), the adsorbed antibody layer was well represented by a uniform layer with a thickness of 40 A. This value is thicker than the 30-33 A observed from AFM, suggesting possible layer compression caused by the tip tapping. An increase in the antibody concentration to 10 mg.L(-1) led to increasing surface adsorption. The corresponding layer structure was well represented by a three-layer model consisting of an inner sublayer of 10 A, a middle sublayer of 30 A, and an outer sublayer of 25 A, with the protein volume fractions in each sublayer being 0.22, 0.42, and 0.10, respectively. The structural transition can be interpreted as a twisting and tilting of segments of the adsorbed molecules, driven by an electrostatic repulsion between them that increases with the surface packing density. Hindrance of antigen access to antibody binding sites, resulting from the change in surface packing, can account for the decrease in antigen binding capacity (AgBC) with increasing surface density of the antibody that is observed.
Subject(s)
Antibodies, Monoclonal/chemistry , Immunoglobulin G/chemistry , Neutrons , Phase Transition , Silicon Dioxide , Water , Animals , Antibodies, Monoclonal/immunology , Chorionic Gonadotropin/chemistry , Chorionic Gonadotropin/immunology , Humans , Immunoglobulin G/immunology , Mice , Microscopy, Atomic Force , Protein Conformation , WettabilityABSTRACT
We have determined the structural conformations of human lactoferrin adsorbed at the air/water interface by neutron reflectivity (NR) and its solution structure by small angle neutron scattering (SANS). The neutron reflectivity measurements revealed a strong structural unfolding of the molecule when adsorbed at the interface from a pH 7 phosphate buffer solution (PBS with a total ionic strength at 4.5 mM) over a wide concentration range. Two distinct regions, a top dense layer of 15-20 angstroms on the air side and a bottom diffuse layer of some 50 angstroms into the aqueous subphase, characterized the unfolded interfacial layer. At a concentration around 1 g dm(-3), close to the physiological concentration of lactoferrin in biological fluids, the adsorbed amount was 5.5 x 10(-8) mol m(-2) in the absence of NaCl, but the addition of 0.3 M NaCl reduced protein adsorption to 3.5 x 10(-8) mol m(-2). Although the polypeptide distributions at the interface remained similar, quantitative analysis showed that the addition of NaCl reduced the layer thickness. Parallel measurements of lactoferrin adsorption in D2O instead of null reflecting water confirmed the unfolded structure at the interface. Furthermore, the D2O data indicated that the polypeptide in the top layer was predominantly protruded out of water, consistent with it being hydrophobic. In contrast, the scattering intensity profiles from SANS were well described by a cylindrical model with a diameter of 47 angstroms and a length of 105 angstroms in the presence of 0.3 M NaCl, indicating a retention of the globular framework in the bulk solution. In the absence of NaCl but with the same amount of phosphate buffer, the length of the cylinder increased to some 190 angstroms and the diameter remained constant. The length increase is indicative of changes in distance and orientation between the bilobal monomers due to the change in charge interactions. The results thus demonstrate that the surface structural unfolding was caused by the exposure of the protein molecule to the unsymmetrical energetic balance following surface adsorption.
Subject(s)
Lactoferrin/chemistry , Protein Folding , Adsorption , Air , Buffers , Deuterium/chemistry , Humans , Hydrogen-Ion Concentration , Hydrophobic and Hydrophilic Interactions , Lactoferrin/physiology , Neutrons , Protein Binding , Scattering, Radiation , Sodium Chloride/pharmacology , Surface Properties , Surface-Active Agents/analysis , Surface-Active Agents/chemistry , Time Factors , Water/chemistryABSTRACT
The in-situ conformations of peptide layers formed from the adsorption of two different synthetic 15-mer peptides at the hydrophilic silicon oxide/aqueous solution interface have been determined using neutron reflectivity (NR). The first peptide is based on the native sequence of a protein-binding domain within a heteromeric transcriptional activator, HAP2, identified from yeast Saccharomyces cerevisiae, with tyrosine (Y) present at the 1st, 8th and 15th amino acid positions, hence we denote this YYY15. Substitution of tryptophan (W) at the same locations gives WWW15. Both peptides have alpha-helical structure in phosphate buffer, as determined by circular dichroism (CD) spectra. D(2)O was used as solvent in the NR experiments to highlight structural heterogeneity across the hydrogenated peptide layers. At pH 7, YYY15 was found to form a weakly adsorbed interfacial monolayer. However, the mutant WWW15 showed strong interfacial adsorption, with the interfacial layer characterized by a middle hydrophobic sublayer of 7-8 A with lower scattering length density and two almost symmetrical hydrophilic outer sublayers of 6-8 A with higher scattering length density, suggesting the formation of a "sideways-on" helical conformation. An increase in pH to 9 resulted in the improved packing within the interfacial layer with similar structure. However, decrease in pH to 5 reduced the interfacial adsorption, mainly due to the enhanced solubility of the peptides associated with the protonation of arginine (R) and lysine (K) groups and the decreasing concentration of divalent HPO(4)(2-) in the phosphate buffer. Subsequent assessment of the reversibility of adsorption showed that once the peptide layers were formed they did not desorb. These interfacial structures may provide feasible routes to interfacial nano-templating.
Subject(s)
CCAAT-Binding Factor/chemistry , Fungal Proteins/chemistry , Peptide Fragments/chemistry , Amino Acid Sequence , Hydrogen-Ion Concentration , Models, Molecular , Molecular Sequence Data , Nanotechnology , Neutrons , Protein Structure, Secondary , Scattering, Radiation , Solutions , Tryptophan/chemistry , Tyrosine/chemistryABSTRACT
Dilute aqueous phase behavior of a novel tris(hydroxymethyl)acrylamidomethane (THAM)-derived telomer bearing a perfluorohexyl hydrophobic chain, F6THAM6, has been investigated. Fluorinated polyhydroxy surfactants of this kind find use in emerging biomedical applications. Neutron reflection (NR) and drop volume surface tension (DVT) methods have been used to determine the critical micelle concentration (cmc=4.7 x 10(-4) mol x dm(-3)) and surface adsorption parameters (at the cmc NR gives a molecular area a(cmc)=67.4 and 62 A(2) and surface excess gamma(cmc)=2.46 x 10(-6) mol x m(-2)). The aggregation structures were determined by small-angle neutron scattering (SANS), indicating globular (polydisperse spheres) micelles of radius approximately 30 A are present. These findings are compared with literature on surfactants with related structures, to identify how the unusual molecular structure of F6THAM6 affects surfactant properties.