Transforming science communication through storytelling.

Science communication is an important skill. It is easier for nonacademic audiences to remember stories that resonate with their imagination rather than facts and figures. To help early-career researchers develop their skills, the EU-LIFE Science Communications Working Group (SCWG) developed a training course based on the experience from previous workshops held at a research institute in Denmark. The stories crafted in the workshops proved impactful, with some integrated into broader campaigns and featured in science magazines. The initiative holds potential for transformative change, helping researchers promote their findings and increasing awareness of emerging research topics among the public. Recently, the initiative has been customized for a summer school aimed at medical doctors pursuing a PhD, marking a step forward in the SCWG's mission to equip researchers with essential communication skills.

Elbow kinematics with increased lengthening of a radial head arthroplasty evaluated with dynamic radiostereometric analysis.

Aims: The aim of this study was to evaluate the kinematics of the elbow following increasing length of the radius with implantation of radial head arthroplasties (RHAs) using dynamic radiostereometry (dRSA). Methods: Eight human donor arms were examined by dRSA during motor-controlled flexion and extension of the elbow with the forearm in an unloaded neutral position, and in pronation and supination with and without a 10 N valgus or varus load, respectively. The elbows were examined before and after RHA with stem lengths of anatomical size, + 2 mm, and + 4 mm. The ligaments were maintained intact by using a step-cut lateral humeral epicondylar osteotomy, allowing the RHAs to be repeatedly exchanged. Bone models were obtained from CT scans, and specialized software was used to match these models with the dRSA recordings. The flexion kinematics of the elbow were described using anatomical coordinate systems to define translations and rotations with six degrees of freedom. Results: The greatest kinematic changes in the elbows were seen with the longest, + 4 mm, implant, which imposed a mean joint distraction of 2.8 mm in the radiohumeral joint and of 1.1 mm in the ulnohumeral joint, an increased mean varus angle of up to 2.4° for both the radius and the ulna, a mean shift of the radius of 2.0 mm in the ulnar direction, and a mean shift of the ulna of 1.0 mm posteriorly. Conclusion: The kinematics of the elbow deviated increasingly from those of the native joint with a 2 mm to a 4 mm lengthening of the radius. This confirms the importance of restoring the natural length of the radius when undertaking RHA.

Glenohumeral joint kinematics during apprehension-relocation test in patients with anterior shoulder instability and glenoid bone loss.

Aims: This study aimed to quantify the shoulder kinematics during an apprehension-relocation test in patients with anterior shoulder instability (ASI) and glenoid bone loss using the radiostereometric analysis (RSA) method. Kinematics were compared with the patient's contralateral healthy shoulder. Methods: A total of 20 patients with ASI and > 10% glenoid bone loss and a healthy contralateral shoulder were included. RSA imaging of the patient's shoulders was performed during a repeated apprehension-relocation test. Bone volume models were generated from CT scans, marked with anatomical coordinate systems, and aligned with the digitally reconstructed bone projections on the RSA images. The glenohumeral joint (GHJ) kinematics were evaluated in the anteroposterior and superoinferior direction of: the humeral head centre location relative to the glenoid centre; and the humeral head contact point location on the glenoid. Results: During the apprehension test, the centre of the humeral head was 1.0 mm (95% CI 0.0 to 2.0) more inferior on the glenoid for the ASI shoulder compared with the healthy shoulder. Furthermore, the contact point of the ASI shoulder was 1.4 mm (95% CI 0.3 to 2.5) more anterior and 2.0 mm (95% CI 0.8 to 3.1) more inferior on the glenoid compared with the healthy shoulder. The contact point of the ASI shoulder was 1.2 mm (95% CI 0.2 to 2.6) more anterior during the apprehension test compared to the relocation test. Conclusion: The humeral head centre was located more inferior, and the GHJ contact point was located both more anterior and inferior during the apprehension test for the ASI shoulders than the healthy shoulders. Furthermore, the contact point displacement between the apprehension and relocation test revealed increased joint laxity for the ASI shoulder than the healthy shoulders. These results contribute to existing knowledge that ASI shoulders with glenoid bone loss may also suffer from inferior shoulder instability.

Radial head arthroplasty diameter impact on elbow kinematics evaluated by dynamic radiostereometric analysis.

Purpose: Radial head arthroplasty (RHA) reestablishes elbow stability after complex radial head fracture, but complication rates are high, possibly due to inappropriate implant sizing. Knowledge of impact of radial head implant diameter on elbow kinematics is limited and warranted. This study evaluated elbow kinematics of different radial head implant diameters after RHA using dynamic radiostereometric analysis (dRSA). Methods: Eight human donor arms were examined with dRSA during elbow flexion with the forearm in unloaded neutral position, and in supinated- and pronated position without and with 10N either varus or valgus load, respectively. Elbow kinematics were examined before and after RHA with head diameters of anatomical size, -2 mm (undersized), and +2 mm (oversized). The ligaments were kept intact by use of step-cut humerus osteotomy for repeated RHA exchange. Bone models were obtained from CT, and by AutoRSA software bone models were matched with dRSA recordings. The elbow kinematics were described using anatomical coordinate systems. Results: Compared to the native radial head during elbow flexion, the anatomical sized RHA shifted 2.0 mm in ulnar direction during unloaded pronated forearm position. The undersized RHA shifted 1.5 mm in posterior direction and 2.1 mm in ulnar direction during unloaded pronated forearm position and increased the varus angle by 2.4° during supinated loaded forearm position. The oversized RHA shifted 1.6 mm in radial direction during loaded supinated forearm position. Conclusions: The anatomically sized RHA should be preferred as it maintained native elbow kinematics the best. The kinematic changes with oversized and undersized RHA diameters were small, suggesting forgiveness for the RHA diameter size. Level of Evidence: Level III.

Stable polyethylene inlay fixation and low polyethylene wear rate in fixed-bearing total knee arthroplasty at five to six years' follow-up.

Aims: Micromotion of the polyethylene (PE) inlay may contribute to backside PE wear in addition to articulate wear of total knee arthroplasty (TKA). Using radiostereometric analysis (RSA) with tantalum beads in the PE inlay, we evaluated PE micromotion and its relationship to PE wear. Methods: A total of 23 patients with a mean age of 83 years (77 to 91), were available from a RSA study on cemented TKA with Maxim tibial components (Zimmer Biomet). PE inlay migration, PE wear, tibial component migration, and the anatomical knee axis were evaluated on weightbearing stereoradiographs. PE inlay wear was measured as the deepest penetration of the femoral component into the PE inlay. Results: At mean six years' follow-up, the PE wear rate was 0.08 mm/year (95% confidence interval 0.06 to 0.09 mm/year). PE inlay external rotation was below the precision limit and did not influence PE wear. Varus knee alignment did not influence PE wear (p = 0.874), but increased tibial component total translation (p = 0.041). Conclusion: The PE inlay was well fixed and there was no relationship between PE stability and PE wear. The PE wear rate was low and similar in the medial and lateral compartments. Varus knee alignment did not influence PE wear.

Dynamic radiostereometry can objectively quantify the kinematic laxity patterns and rotation instability of the knee during a pivot-shift test.

PURPOSE: The pivot-shift test is used to clinically assess knee instability in patients with anterior cruciate ligament (ACL) lesions; however, it has low interobserver reliability. Dynamic radiostereometry (dRSA) is a highly precise and noninvasive method for the objective evaluation of joint kinematics. The purpose of this study was to quantify precise knee kinematics during a pivot-shift test using dRSA imaging. METHOD: Eight human donor legs, including hemipelvises, were evaluated. Arthroscopic intervention was performed inducing ligament lesions in the ACL, and anterolateral ligament (ALL) section was performed as a capsular incision. The pivot-shift test was recorded with dRSA on knees with intact ligaments, ACL-deficient and ACL + ALL-deficient knees. RESULTS: A pivot-shift pattern was identifiable after ligament lesion, as a change in tibial posterior drawer velocity from 7.8 mm/s (95% CI: 3.7; 11.9) in ligament intact knees to 30.4 mm/s (95% CI 23.0; 38.8) after ACL lesion to 35.1 mm/s (95% CI 23.4; 46.7) after combined ACL-ALL lesion. The anterior-posterior drawer excursion increased from 2.8 mm (95% CI 2.1; 3.4) in ligament intact knees to 7.2 mm (95% CI 5.5; 8.9) after ACL lesion to 7.6 mm (95% CI 5.5; 9.8) after combined lesion. A statistically significant increase in tibial external rotation towards the end of the pivot-shift motion was observed when progressing from intact to ACL + ALL-deficient knees (p < 0.023). CONCLUSION: This experimental study demonstrates the feasibility of dRSA to objectively quantify the kinematic laxity patterns of the knee during the pivot-shift test. The dynamic parameters obtained through dRSA revealed the kinematic changes from ACL to combined ACL-ALL ligament lesion. LEVEL OF EVIDENCE: Not applicable.

Evaluation of automated radiostereometric image registration in total knee arthroplasty utilizing a synthetic-based and a CT-based volumetric model.

Radiostereometic analysis (RSA) is an accurate method for rigid body pose (position and orientation) in three-dimensional space. Traditionally, RSA is based on insertion of periprosthetic tantalum markers and manual implant contour selection which limit clinically application. We propose an automated image registration technique utilizing digitally reconstructed radiographs (DRR) of computed tomography (CT) volumetric bone models (autorsa-bone) as a substitute for tantalum markers. Furthermore, an automated synthetic volumetric representation of total knee arthroplasty implant models (autorsa-volume) to improve previous silhouette-projection methods (autorsa-surface). As reference, we investigated the accuracy of implanted tantalum markers (marker) or a conventional manually contour-based method (mbrsa) for the femur and tibia. The data are presented as mean (standard deviation). The autorsa-bone method displayed similar accuracy of -0.013 (0.075) mm compared to the gold standard method (marker) of -0.013 (0.085). The autorsa-volume with 0.034 (0.106) mm did not markedly improve the autorsa-surface with 0.002 (0.129) mm, and none of these reached the mbrsa method of -0.009 (0.094) mm. In conclusion, marker-free RSA is feasible with similar accuracy as gold standard utilizing DRR and CT obtained volumetric bone models. Furthermore, utilizing synthetic generated volumetric implant models could not improve the silhouette-based method. However, with a slight loss of accuracy the autorsa methods provide a feasible automated alternative to the semi-automated method.

Medial congruent polyethylene design show different tibiofemoral kinematics and enhanced congruency compared to a standard symmetrical cruciate retaining design for total knee arthroplasty-an in vivo randomized controlled study of gait using dynamic radiostereometry.

PURPOSE: New total knee arthroplasty implant designs attempt to normalize kinematics patterns that may improve functional performance and patient satisfaction. It was hypothesized that a more medial congruent (MC) anatomic bearing design (1) influences the tibiofemoral kinematics and (2) enhances articular congruency compared to a standard symmetrical cruciate retaining (CR) bearing design. METHODS: In this double-blinded randomized study, 66 patients with knee osteoarthritis were randomly included in two groups: MC (n = 31) and CR (n = 33). Clinical characteristics such as knee ligament lesions and knee osteoarthritis scores were graded on preoperative magnetic resonance imaging and radiography. At the 1-year follow-up, dynamic radiostereometric analysis was used to assess tibiofemoral joint kinematics and articulation congruency. Patient-reported outcome measures, Oxford Knee Score, the Forgotten Joint Score, and the Knee Osteoarthritis Outcome Score, were assessed preoperatively and at the 1-year follow-up. RESULTS: Compared to the CR bearing, the MC bearing displayed an offset with approximately 3 mm greater anterior tibial drawer (p < 0.001) during the entire motion, and up to approximately 3.5 degrees more tibial external rotation (p = 0.004) from mid-swing to the end of the gait cycle at the 1-year follow-up. Furthermore, the congruency area in the joint articulation was larger during approximately 80% of the gait cycle for the MC bearing compared to the CR. The patient-reported outcome measures improved (p < 0.001), but there were no differences between groups. In addition, there were no differences in clinical characteristics and there were no knee revisions or recognized deep infections during follow-up. CONCLUSION: The study demonstrates that the MC-bearing design changes tibiofemoral kinematics and increases the area of congruency towards more native knee kinematics than the CR bearing. In perspective this may contribute to a more stabilized knee motion, restoring the patient's confidence in knee function during daily activities.

The relationship between muscle power, functional performance, accelerometer-based measurement of physical activity and patient-reported outcomes in patients with hip osteoarthritis: A cross-sectional study.

BACKGROUND: Patients with unilateral hip osteoarthritis appear to have between-leg differences in leg extension power (LEP). The Nottingham Leg Extensor Power Rig provides reliable and valid results but requires sensitive equipment. It would be relevant to identify measures closely associated with this test. OBJECTIVE: (i) To investigate if LEP is lower in the affected leg compared to the non-affected leg. Furthermore, to investigate the associations between LEP and the measures: (ii) Functional performance, (iii) accelerometer-based measurement of physical activity and (iv) patient-reported outcome measures (PROM). DESIGN: Cross-sectional study including 60 patients (30 men, 30 women) with hip osteoarthritis scheduled for hip replacement. METHOD: The counter movement jump and 10-m sprint tests were used to determine functional performance, accelerometer-sensors were used to determine physical activity and the Copenhagen Hip and Groin Outcome Score (HAGOS) was used to determine PROM. RESULTS: (i) LEP in the affected leg corresponded to 79% [95% CI 74%; 85%] of the non-affected leg, (ii) LEP was positively associated with functional performance tests (ß 0.63 to 0.78, p < 0.05), (iii) positively associated although non-significantly with physical activity (ß 0.16 to 0.23, p > 0.05) and (iv) positively associated with the six HAGOS subscales (ß 0.25 to 0.54, p < 0.05). CONCLUSION: Functional performance tests may be used as feasible, inexpensive and fast ways to assess LEP in clinical settings. These results may suggest that interventions aimed at improving LEP can improve functional performance and PROM, but not physical activity. Future research is needed to confirm the causality of these cross-sectional findings. THE CLINICAL TRIAL REGISTRATION NUMBERS: Danish Data Protection Agency (1-16-02-640-14), ClinicalTrials.gov (NTC02301182) and approved by the Danish Biomedical Research Ethics Committee (1-10-72- 343-14) prior to data collection.

Normal Values of Distal Radioulnar Joint Kinematics during a Dynamic Press Test.

Background Measurement of in vivo distal radioulnar joint (DRUJ) pathomechanics during simple activities can represent the disability experienced by patients and may be useful in diagnostics of DRUJ instability. A first step is to describe the physiological normal limits for DRUJ kinematics in a reproducible and precise test setup, which was the aim of this study. Methods DRUJ kinematics were evaluated in 33 participants with dynamic radiostereometry (RSA) while performing a standardized press test examination. AutoRSA software was used for image analyses. Computed tomography (CT) forearm bone models were generated, and standardized anatomical axes were applied to estimate kinematic outcomes including, DRUJ translation, DRUJ position ratio, and changes in ulnar variance. Repeatability of dynamic RSA press test double examinations was evaluated to estimate the precision and intraclass correlation coefficient (ICC) test-retest agreement. Results The maximum force during the press test was 6.0 kg (95% confidence interval [CI]: 5.1-6.9), which resulted in 4.7 mm (95% CI: 4.2-5.1) DRUJ translation, DRUJ position ratio of 0.40 (95% CI: 0.33-0.44), and increase in ulnar variance of 1.1 mm (95% CI: 1.0-1.2). The mean maximum DRUJ translation leveled off after a 5 kg force application. The DRUJ translation ICC coefficient was 0.93 within a prediction interval of ± 0.53mm. Conclusions This clinical study demonstrates the normal values of DRUJ kinematics and reports excellent agreement and high precision of the press tests examination using an automated noninvasive dynamic RSA imaging method based on patient-specific CT bone models. The next step is the application of the method in patients with arthroscopic verified triangular fibrocartilage complex injuries. Level of Evidence This is a Level IV, case series study.

Distal radioulnar joint kinematics before surgery and 12 months following open foveal reinsertion of the triangular fibrocartilage complex: comparison with the contralateral non-injured joint.

BACKGROUND AND PURPOSE: Foveal triangular fibrocartilage complex (TFCC) lesion may cause distal radioulnar joint (DRUJ) instability. Dynamic radiostereometry (dRSA) has been validated for objective measurement of DRUJ kinematics. We evaluated DRUJ kinematics by dRSA before surgery and 12 months following open foveal reinsertion of the TFCC in comparison with contralateral non-injured DRUJs. PATIENTS AND METHODS: In a prospective cohort study, 21 patients (11 men) of mean age 34 years (22-50) with arthroscopically confirmed foveal TFCC lesion were evaluated preoperatively, and at 6 and 12 months after open foveal TFCC reinsertion with QDASH, PRWE, pain on NRS, and bilateral dRSA imaging during a patient active press test motion cycle, including a force-loaded downstroke and a release phase. RESULTS: Preoperatively, the force-loaded part (> 2.3 kg; 95% CI 1.6-3.0) of the press test motion cycle (from 15% to 75%) revealed a more volar position of the ulnar head in the sigmoid notch (DRUJ position ratio) and increased distance in DRUJs with foveal TFCC lesion compared with the patients' contralateral non-injured DRUJ (p < 0.05). 6 months postoperatively, the DRUJ position was generally normalized and remained normalized at 12 months. However, the DRUJ distance remained higher on the injured side. 12 months postoperatively, patients reported less pain during activities, with improved QDASH and PRWE scores (p < 0.007). INTERPRETATION: DRUJ kinematics during the press test showed increased DRUJ translation to a more volar position of the ulnar head after foveal TFCC lesion compared with the contralateral non-injured DRUJs. Open foveal TFCC reinsertion had a stabilizing effect on DRUJ kinematics towards normalization, and improved patient-reported outcomes 6 and 12 months after surgery.

High Cefuroxime Concentrations and Long Elimination in an Orthopaedic Surgical Deadspace-A Microdialysis Porcine Study.

Deadspace is the tissue and bony defect in a surgical wound after closure. This space is presumably poorly perfused favouring bacterial proliferation and biofilm formation. In arthroplasty surgery, an obligate deadspace surrounding the prosthesis is introduced and deadspace management, in combination with obtaining therapeutic prophylactic antibiotic concentrations, is important for limiting the risk of acquiring a periprosthetic joint infection (PJI). This study aimed to investigate cefuroxime distribution to an orthopaedic surgical deadspace in comparison with plasma and bone concentrations during two dosing intervals (8 h × 2). In a setup imitating shoulder arthroplasty surgery, but without insertion of a prosthesis, microdialysis catheters were placed for cefuroxime sampling in a deadspace in the glenohumeral joint and in cancellous bone of the scapular neck in eighteen pigs. Blood samples were collected as a reference. Cefuroxime was administered according to weight (20 mg/kg). The primary endpoint was time above the cefuroxime minimal inhibitory concentration of the free fraction of cefuroxime for Staphylococcus aureus (fT > MIC (4 µg/mL)). During the two dosing intervals, mean fT > MIC (4 µg/mL) was significantly longer in deadspace (605 min) compared with plasma (284 min) and bone (334 min). For deadspace, the mean time to reach 4 µg/mL was prolonged from the first dosing interval (8 min) to the second dosing interval (21 min), while the peak drug concentration was lower and half-life was longer in the second dosing interval. In conclusion, weight-adjusted cefuroxime fT > MIC (4 µg/mL) and elimination from the deadspace was longer in comparison to plasma and bone. Our results suggest a deadspace consolidation and a longer diffusions distance, resulting in a low cefuroxime turn-over. Based on theoretical targets, cefuroxime appears to be an appropriate prophylactic drug for the prevention of PJI.

Development, construction, and validation of a thinner uniplanar calibration cage for radiostereometry.

Radiostereometric analysis (RSA) is an accurate and precise radiographic method that can be used to measure micromotion of implants and study joint kinematics in vivo. A calibration cage with radiopaque markers is used to calibrate the RSA images; however, the thickness (250 mm) of the calibration cage restricts the available area for the patient and equipment during RSA recordings. A thinner calibration cage would increase the recording area, facilitate handling of the cage, and ease integration of the cage with the RSA system. We developed a thinner calibration cage without compromise of accuracy and precision. First, we performed numerical simulations of an RSA system, and showed that the calibration cage thickness could be decreased to 140 mm maintaining accuracy and precision using 40 fiducial and 30 control markers. Second, we constructed a new calibration cage (NRT cage) according to the simulation results. Third, we validated the new calibration cage against two state-of-the-art calibration cages (Umeaa cage and Leiden cage) in a phantom study. All cages performed similar for marker-based analysis, except for y-rotation, where the Umeaa cage (SD = 0.064 mm) was less precise compared to the NRT (SD = 0.038 mm) and Leiden cages (0.042 mm) (p = .01). For model-based analysis the NRT cage had superior precision for translations (SD ≤ 0.054 mm) over the Leiden cage (SD ≤ 0.118 mm) and Umeaa cage (SD ≤ 0.093 mm) (p < .01). The combined study confirmed that the new and thinner calibration cage maintained accuracy and precision at the level of existing thicker calibration cages.

Cys-labeling kinetics of membrane protein GlpG: a role for specific SDS binding and micelle changes?

Empirically, α-helical membrane protein folding stability in surfactant micelles can be tuned by varying the mole fraction MFSDS of anionic (sodium dodecyl sulfate (SDS)) relative to nonionic (e.g., dodecyl maltoside (DDM)) surfactant, but we lack a satisfying physical explanation of this phenomenon. Cysteine labeling (CL) has thus far only been used to study the topology of membrane proteins, not their stability or folding behavior. Here, we use CL to investigate membrane protein folding in mixed DDM-SDS micelles. Labeling kinetics of the intramembrane protease GlpG are consistent with simple two-state unfolding-and-exchange rates for seven single-Cys GlpG variants over most of the explored MFSDS range, along with exchange from the native state at low MFSDS (which inconveniently precludes measurement of unfolding kinetics under native conditions). However, for two mutants, labeling rates decline with MFSDS at 0-0.2 MFSDS (i.e., native conditions). Thus, an increase in MFSDS seems to be a protective factor for these two positions, but not for the five others. We propose different scenarios to explain this and find the most plausible ones to involve preferential binding of SDS monomers to the site of CL (based on computational simulations) along with changes in size and shape of the mixed micelle with changing MFSDS (based on SAXS studies). These nonlinear impacts on protein stability highlights a multifaceted role for SDS in membrane protein denaturation, involving both direct interactions of monomeric SDS and changes in micelle size and shape along with the general effects on protein stability of changes in micelle composition.

Less polyethylene wear in monobloc compared to modular ultra-high-molecular-weight-polyethylene inlays in hybrid total knee arthroplasty: A 5-year randomized radiostereometry study.

BACKGROUND: A modular polyethylene (PE) inlay in total knee arthroplasty (TKA) may wear on both sides. PE particles may induce osteolysis, which can lead to implant loosening. The aim of this study was to determine if PE wear in monobloc TKA differs from that ofmodular TKA at 60-month follow-up. PATIENTS AND METHODS: In a prospective, patient-blinded trial, 50 patients were randomized to hybrid TKA surgery with either acementless high-porosity trabecular-metal tibial component with a monobloc UHMWPE inlay (MONO-TM) or a cementless low-porosity screw-augmented titanium fiber-mesh tibial component with a modular UHMWPE inlay (MODULAR-FM). Radiostereometry was used to measure PE wear and tibial component migration. RESULTS: At 60-monthfollow-up, mean PE wear of the medial compartment was 0.24 mm and 0.61 mm and mean PE wear of the lateral compartment was 0.31 mm and 0.82 mm for the MONO-TM and the MODULAR-FM groups, respectively (p < 0.01). The PE wear-rate was 0.05 mm (95% CI 0.03-0.08) in the MONO-TM group and 0.14 mm (95% CI 0.12-0.17) in the MODULAR-FM group (p < 0.01). Total translation at 60 months was mean 0.30 mm (95% CI 0.10-0.51) less (p < 0.01) for MONO-TM compared with MODULAR-FM tibial components. The majority of tibial components were stable (<0.2 mm MTPM) from 12 to 24-month and 24 to 60-month follow-up. CONCLUSION: At mid-term follow-up, monobloc PE inlay wear was approximately 40% of that of the modular PE inlay wear, which suggest that back-side wear of modular PE inlays is a significant contributor of PE wear in hybrid TKA.

Assessment of knee kinematics with dynamic radiostereometry: Validation of an automated model-based method of analysis using bone models.

Radiostereometic analysis (RSA) is a precise method for the functional assessment of joint kinematics. Traditionally, the method is based on tracking of surgically implanted bone markers and analysis is user intensive. We propose an automated method of analysis based on models generated from computed tomography (CT) scans and digitally reconstructed radiographs. The study investigates method agreement between marker-based RSA and the CT bone model-based RSA method for assessment of knee joint kinematics in an experimental setup. Eight cadaveric specimens were prepared with bone markers and bone volume models were generated from CT-scans. Using a mobile fixture setup, dynamic RSA recordings were obtained during a knee flexion exercise in two unique radiographic setups, uniplanar and biplanar. The method agreement between marker-based and CT bone model-based RSA methods was compared using bias and LoA. Results obtained from uniplanar and biplanar recordings were compared and the influence of radiographic setup was considered for clinical relevance. The automated method had a bias of -0.19 mm and 0.11° and LoA within ±0.42 mm and ±0.33° for knee joint translations and rotations, respectively. The model pose estimation of the tibial bone was more precise than the femoral bone. The radiographic setup had no clinically relevant effect on results. In conclusion, the automated CT bone model-based RSA method had a clinical precision comparable to that of marker-based RSA. The automated method is non-invasive, fast, and clinically applicable for functional assessment of knee kinematics and pathomechanics in patients.

Consumption of probiotics increases the effect of regulatory T cells in transfer colitis.

BACKGROUND: Probiotics may alter immune regulation. Recently, we showed that the probiotic bacteria Lactobacillus acidophilus NCFM™ influenced the activity of regulatory T cells (Tregs) in vitro. The aim of the present work was to demonstrate if L. acidophilus NCFM™ also affects the function of Tregs in vivo. METHODS: Development of colitis after transfer of CD4+CD25- T cells and protection from colitis by Tregs was studied in immunodeficient SCID mice which were simultaneously tube-fed with L. acidophilus NCFM™ or L. salivarius Ls-33 for 5 weeks. RESULTS: Probiotic-fed SCID mice transplanted with low numbers of Tregs in addition to the disease-inducing T cells were completely protected from colitis. This was in contrast to the control group, which showed intermediate levels of inflammation. In addition, feeding with probiotics lowered serum levels of inflammatory cytokines in both colitic mice and in mice protected from colitis by Tregs. Gene expression patterns of rectum samples of protected mice that receive either one of the probiotics showed a closer resemblance to naïve SCID mice than did patterns of the control group. The mechanism of action of the probiotics appears to be an indirect effect by inducing a Treg-favorable environment rather than a direct effect on the Tregs. CONCLUSIONS: L. acidophilus NCFM™ and L. salivarius Ls-33 feeding of SCID mice increases the in vivo effect of Tregs, resulting in a gene expression pattern in the rectum resembling that of the naïve SCID mouse.

Exercise-induced change in type 1 cytokine-producing CD8+ T cells is related to a decrease in memory T cells.

In response to exercise, both CD4(+) and CD8(+) T cells are mobilized to the blood, but the levels of these cells decline below preexercise values in the postexercise period. T cells are functionally polarized, depending on the cytokines they produce. Type 1 cells produce, e.g., interferon (INF)-gamma, whereas type 2 produce, e.g., interleukin (IL)-4. It was recently demonstrated that exercise induces a decrease in the percentage of type 1 T cells. The present study further investigated the mechanisms underlying the exercise-induced shift in the balance between type 1 and type 2 cytokine-producing cells. Seven healthy men performed 1.5 h of treadmill running with blood samples drawn before exercise, at the end of exercise, and 2 h after exercise. Intracellular expression of IFN-gamma, IL-2, and IL-4 was detected in CD4(+) and CD8(+) T cells after stimulation with phorbol 12-myristate 13-acetate and ionomycin. Intracellular expression of IFN-gamma within CD8(+) cells was decreased in the postexercise period compared with values obtained immediately after exercise, whereas the expression of IL-2 and IL-4 did not change within the CD4(+) and CD8(+) cell populations. The decrease in IFN-gamma-producing CD8(+) T cells postexercise was negatively correlated with a decrease in percentage of memory T cells within the CD8(+) cells (r = -0.94; P < or = 0.002). In conclusion, this study demonstrates that the exercise-induced change in type 1 cytokine-producing T cells is related to a decline in memory cells.