ABSTRACT
Chitosan lactate (CSS) has been widely used for academic and industrial applications due to its biocompatibility, biodegradability, and high biological activity. Unlike chitosan, which is generally soluble only in acid solution, CSS can be directly used by dissolving in water. In this study, CSS was prepared from moulted shrimp chitosan at room temperature by a solid-state method. Chitosan was first swollen in a mixture of ethanol and water, making it more susceptible to reacting with lactic acid in the next step. As a result, the prepared CSS had a high solubility (over 99 %) and zeta potential (+ 99.3 mV) and was comparable to the commercial product. The preparation method of CSS is facile and efficient for a large-scale process. In addition, the prepared product exhibited a potential flocculant for harvesting Nannochloropsis sp., a marine microalga widely used as a popular food for larvae. In the best condition, the CSS solution (250 ppm) at pH 10 showed the highest recovery capacity (â¼ 90 % after 120 min) for harvesting Nannochloropsis sp. Besides, the harvested microalgal biomass showed excellent regeneration after 6 culture days. This paper's findings suggest a circular economy in aquaculture by producing value-added products from solid wastes, which can minimize the environmental impact and move towards sustainable zero-waste.
Subject(s)
Chitosan , Microalgae , Stramenopiles , Biomass , SeafoodABSTRACT
Dye and heavy metal contaminants are mainly aquatic pollutants. Although many materials and methods have been developed to remove these pollutants from water, effective and cheap materials and methods are still challenging. In this study, highly porous hydroxyapatite/graphene oxide/chitosan beads (HGC) were prepared by a facile one-step method and investigated as efficient adsorbents. The prepared beads showed a high porosity and low bulk density. SEM images indicated that the hydroxyapatite (HA) nanoparticles and graphene oxide (GO) nanosheets were well dispersed on the CTS matrix. FT-IR spectra confirmed good incorporation of the three components. The adsorption behavior of the obtained beads to methylene blue (MB) and copper ions was investigated, including the effect of the contact time, pH medium, dye/metal ion initial concentration, and recycle ability. The HGC beads showed rapid adsorption, high capacity, and easy separation and reused due to the porous characteristics of GO sheets and HA nanoparticles as well as the rich negative charges of the chitosan (CTS) matrix. The maximum sorption capacities of the HGC beads were 99.00 and 256.41 mg g-1 for MB and copper ions removal, respectively.
ABSTRACT
Shrimp heads are considered as a potential source for the recovery of many valuable components such as chitin, protein and carotenoids. In the present study, both protein hydrolysate and chitin/chitosan were recovered using combination of physical, biological and chemical treatments. Shrimp heads were separated from liquid phase by a facile and efficient physical pretreatment. The liquid fraction was then hydrolyzed using formic acid and vacuum concentrated to obtain an astaxanthin-rich protein hydrolysate. The solid fraction was used to produce chitin by deproteination and demineralization. The hydrolysate consisted of a high astaxanthin (192 ppm) and protein (26.3 wt%) content. Chitosan prepared from chitin showed a high degree of deacetylation (85.4%) with low protein (0.25 wt%) and mineral (0.22 wt%) contents. The relative crystalline structure of the chitin and chitosan were 54.7 and 10.4%, respectively. The deacetylation of chitin was confirmed by Fourier Transform Infrared Spectroscopy. The present procedure approached to produce maximum valuable components including astaxanthin-rich protein hydrolysate and chitin/chitosan from shrimp head waste.