ABSTRACT
Newly discovered opto-ionic effects in metal oxides provide unique opportunities for functional ceramic applications. The authors generalize the recently demonstrated grain boundary opto-ionic effect observed in solid electrolyte thin films under ultraviolet (UV) irradiation to a radiation-ionic effect that can be applied to bulk materials and used for gamma-rays (γ-rays) detection. Near room temperature, lightly doped Gd-doped CeO2, a polycrystalline ion conducting ceramic, exhibits a resistance ratio change ≈103 and reversible response in ionic current when exposed to 60Co γ-ray (1.1 and 1.3 MeV). This is attributed to the steady state passivation of space charge barriers at grain boundaries, that act as virtual electrodes, capturing radiation-induced electrons, in turn lowering space charge barrier heights, and thereby exclusively modulating the ionic carrier flow within the ceramic electrolytes. Such behavior allows significant electrical response under low fields, that is, < 2 V cm-1, paving the way to inexpensive, sensitive, low-power, and miniaturizable solid-state devices, uniquely suited for operating in harsh (high temperature, pressure, and corrosive) environments. This discovery presents opportunities for portable and/or scalable radiation detectors benefiting geothermal drilling, small modular reactors, nuclear security, and waste management.
ABSTRACT
Highly disordered amorphous Li7La3Zr2O12 (aLLZO) is a promising class of electrolyte separators and protective layers for hybrid or all-solid-state batteries due to its grain-boundary-free nature and wide electrochemical stability window. Unlike low-entropy ionic glasses such as LixPOyNz (LiPON), these medium-entropy non-Zachariasen aLLZO phases offer a higher number of stable structure arrangements over a wide range of tunable synthesis temperatures, providing the potential to tune the LBU-Li+ transport relation. It is revealed that lanthanum is the active "network modifier" for this new class of highly disordered Li+ conductors, whereas zirconium and lithium serve as "network formers". Specifically, within the solubility limit of La in aLLZO, increasing the La concentration can result in longer bond distances between the first nearest neighbors of ZrâO and LaâO within the same local building unit (LBU) and the second nearest neighbors of ZrâLa across two adjacent network-former and network-modifier LBUs, suggesting a more disordered medium- and long-range order structure in LLZO. These findings open new avenues for future designs of amorphous Li+ electrolytes and the selection of network-modifier dopants. Moreover, the wide yet relatively low synthesis temperatures of these glass-ceramics make them attractive candidates for low-cost and more sustainable hybrid- or all-solid-state batteries for energy storage.
ABSTRACT
Sr(Ti,Fe)O3-y perovskite solid solutions are relevant functional materials for energy conversion and electronic devices such as solid oxide fuel and photoelectrochemical cells, electrolyzers, oxygen sensors, resistive random access memories or synaptic transistors. The Raman spectra and vibrational characteristics of the Sr(Ti,Fe)O3-y materials class are suitable for describing their defect chemistry and the iron valence state, which governs a multitude of its mixed ionic-electronic transport and other characteristics. We synthesize a standard range of compositions containing 1-75 mol% of iron including the end members in the form of macrocrystalline bulk pellets, nanocrystalline poly- and single crystalline thin films. Through the change in both iron substitution level and microstructure, we directly see the effect of defect chemistry such as its phase, transition metal ion valence and oxygen nonstoichiometry on the Raman spectra. These are discussed in terms of in and ex situ experiments under oxidizing/reducing atmosphere. In contrast to long range structural X-ray diffraction measurements, Raman spectroscopy provides valuable insights into oxygen vacancy ordering and oxygen nonstoichiometry for the Sr(Ti,Fe)O3-y material class.
ABSTRACT
Efficient and affordable synthesis of Li+ functional ceramics is crucial for the scalable production of solid electrolytes for batteries. Li-garnet Li7 La3 Zr2 O12-d (LLZO), especially its cubic phase (cLLZO), attracts attention due to its high Li+ conductivity and wide electrochemical stability window. However, high sintering temperatures raise concerns about the cathode interface stability, production costs, and energy consumption for scalable manufacture. We show an alternative "sinter-free" route to stabilize cLLZO as films at half of its sinter temperature. Specifically, we establish a time-temperature-transformation (TTT) diagram which captures the amorphous-to-crystalline LLZO transformation based on crystallization enthalpy analysis and confirm stabilization of thin-film cLLZO at record low temperatures of 500 °C. Our findings pave the way for low-temperature processing via TTT diagrams, which can be used for battery cell design targeting reduced carbon footprints in manufacturing.
ABSTRACT
Cermet catalysts formed via exsolution of metal nanoparticles from perovskites promise to perform better in electro- and thermochemical applications than those synthesized by conventional wet-chemical approaches. However, a shortage of robust material design principles still stands in the way of widespread commercial adoption of exsolution. Working with Ni-doped SrTiO3 solid solutions, we investigated how the introduction of Sr deficiency as well as Ca, Ba, and La doping on the Sr site changed the size and surface density of exsolved Ni nanoparticles. We carried out exsolution on 11 different compositions under fixed conditions. We elucidated the effect of A-site defect size/valence on nanoparticle density and size as well as the effect of composition on nanoparticle immersion and ceramic microstructure. Based on our experimental results, we developed a model that quantitatively predicted a composition's exsolution properties using density functional theory calculations. The model and calculations provide insights into the exsolution mechanism and can be used to find new compositions with high exsolution nanoparticle density.
ABSTRACT
All-solid-state batteries primarily focus on macrocrystalline solid electrolyte/cathode interfaces, and little is explored on the growth and stability of nanograined Li-garnet and cathode ones. In this work, a thin (â¼500 nm) film of LiCoO2 (LCO) has been grown on top of the polycrystalline layer of Ta-doped Li7La3Zr2O12 (Ta-LLZO) solid electrolyte using the pulsed laser deposition (PLD) technique. Scanning transmission electron microscopy, electron diffraction, and electron tomography demonstrated that the LCO film is formed by columnar elements with the shape of inverted cones. The film appears to be highly textured, with the (003) LCO crystal planes parallel to the LCO/Ta-LLZO interface and with internal pores shaped by the {104} and {102} planes. According to density functional theory (DFT) calculations, this specific microstructure is governed by a competition between free energies of the corresponding crystal planes, which in turn depends on the oxygen and lithium chemical potentials during the deposition, indicating that thermodynamics plays an important role in the resulting LCO microstructure even under nonequilibrium PLD conditions. Based on the thermodynamic estimates, the experimental conditions within the LCO stability domain are proposed for the preferential {104} LCO orientation, which is considered favorable for enhanced Li diffusion in the positive electrode layers of all-solid-state batteries.
ABSTRACT
Solids with extraordinarily high Li+ dynamics are key for high performance all-solid-state batteries. The thiophosphate Li10GeP2S12 (LGPS) belongs to the best Li-ion conductors with an ionic conductivity exceeding 10 mS cm-1 at ambient temperature. Recent molecular dynamics simulations performed by Dawson and Islam predict that the ionic conductivity of LGPS can be further enhanced by a factor of 3 if local disorder is introduced. As yet, no experimental evidence exists supporting this fascinating prediction. Here, we synthesized nanocrystalline LGPS by high-energy ball-milling and probed the Li+ ion transport parameters. Broadband conductivity spectroscopy in combination with electric modulus measurements allowed us to precisely follow the changes in Li+ dynamics. Surprisingly and against the behavior of other electrolytes, bulk ionic conductivity turned out to decrease with increasing milling time, finally leading to a reduction of σ20°C by a factor of 10. 31P, 6Li NMR, and X-ray diffraction showed that ball-milling forms a structurally heterogeneous sample with nm-sized LGPS crystallites and amorphous material. At -135 °C, electrical relaxation in the amorphous regions is by 2 to 3 orders of magnitude slower. Careful separation of the amorphous and (nano)crystalline contributions to overall ion transport revealed that in both regions, Li+ ion dynamics is slowed down compared to untreated LGPS. Hence, introducing defects into the LGPS bulk structure via ball-milling has a negative impact on ionic transport. We postulate that such a kind of structural disorder is detrimental to fast ion transport in materials whose transport properties rely on crystallographically well-defined diffusion pathways.
ABSTRACT
Next-generation implantable devices such as sensors, drug-delivery systems, and electroceuticals require efficient, reliable, and highly miniaturized power sources. Existing power sources such as the Li-I2 pacemaker battery exhibit limited scale-down potential without sacrificing capacity, and therefore, alternatives are needed to power miniaturized implants. This work shows that ceramic electrolytes can be used in potentially implantable glucose fuel cells with unprecedented miniaturization. Specifically, a ceramic glucose fuel cell-based on the proton-conducting electrolyte ceria-that is composed of a freestanding membrane of thickness below 400 nm and fully integrated into silicon for easy integration into bioelectronics is demonstrated. In contrast to polymeric membranes, all materials used are highly temperature stable, making thermal sterilization for implantation trivial. A peak power density of 43 µW cm-2 , and an unusually high statistical verification of successful fabrication and electrochemical function across 150 devices for open-circuit voltage and 12 devices for power density, enabled by a specifically designed testing apparatus and protocol, is demonstrated. The findings demonstrate that ceramic-based micro-glucose-fuel-cells constitute the smallest potentially implantable power sources to date and are viable options to power the next generation of highly miniaturized implantable medical devices.
Subject(s)
Electrolytes , Glucose , Ceramics , Electronics , Glucose/metabolism , Prostheses and ImplantsABSTRACT
Grain boundary conductivity limitations are ubiquitous in material science. We show that illumination with above-bandgap light can decrease the grain boundary resistance in solid ionic conductors. Specifically, we demonstrate the increase of the grain boundary conductance of a 3 mol% Gd-doped ceria thin film by a factor of approximately 3.5 at 250 °C and the reduction of its activation energy from 1.12 to 0.68 eV under illumination, while light-induced heating and electronic conductivity could be excluded as potential sources for the observed opto-ionic effect. The presented model predicts that photo-generated electrons decrease the potential barrier heights associated with space charge zones depleted in charge carriers between adjacent grains. The discovered opto-ionic effect could pave the way for the development of new electrochemical storage and conversion technologies operating at lower temperatures and/or higher efficiencies and could be further used for fast and contactless control or diagnosis of ionic conduction in polycrystalline solids.
ABSTRACT
Classic chemical sensors integrated in phones, vehicles, and industrial plants monitor the levels of humidity or carbonaceous/oxygen species to track environmental changes. Current projections for the next two decades indicate the strong need to increase the ability of sensors to sense a wider range of chemicals for future electronics not only to continue monitoring environmental changes but also to ensure the health and safety of humans. To achieve this goal, more chemical sensing principles and hardware must be developed. Here, a proof-of-principle for the specific electrochemistry, material selection, and design of a Li-garnet Li7 La3 Zr2 O12 (LLZO)-based electrochemical sensor is provided, targeting the highly corrosive environmental pollutant sulfur dioxide (SO2 ). This work extends the prime use of LLZO as a battery component as well as the range of trackable pollutants for potential future sensor-noses. Novel composite sensing-electrode designs using LLZO-based porous scaffolds are employed to define a high number of reaction sites, and successfully track SO2 at the dangerous levels of 0-10 ppm with close-to-theoretical SO2 sensitivity. The insights on the sensing electrochemistry, phase stability and sensing electrode/Li+ electrolyte structures provide first guidelines for future Li-garnet sensors to monitor a wider range of environmental pollutants and toxins.
Subject(s)
Environmental Monitoring , Electrodes , Environmental PollutantsABSTRACT
Memristive devices are among the most prominent candidates for future computer memory storage and neuromorphic computing. Though promising, the major hurdle for their industrial fabrication is their device-to-device and cycle-to-cycle variability. These occur due to the random nature of nanoionic conductive filaments, whose rupture and formation govern device operation. Changes in filament location, shape, and chemical composition cause cycle-to-cycle variability. This challenge is tackled by spatially confining conductive filaments with Ni nanoparticles. Ni nanoparticles are integrated on the bottom La0.2 Sr0.7 Ti0.9 Ni0.1 O3- δ electrode by an exsolution method, in which, at high temperatures under reducing conditions, Ni cations migrate to the perovskite surface, generating metallic nanoparticles. This fabrication method offers fine control over particle size and density and ensures strong particle anchorage in the bottom electrode, preventing movement and agglomeration. In devices based on amorphous SrTiO3 , it is demonstrated that as the exsolved Ni nanoparticle diameter increases up to ≈50 nm, the ratio between the ON and OFF resistance states increases from single units to 180 and the variability of the low resistance state reaches values below 5%. Exsolution is applied for the first time to engineer solid-solid interfaces extending its realm of application to electronic devices.
ABSTRACT
Increasing the capacity and kinetics of oxygen exchange in solid oxides is important to improve the performance of numerous energy-related materials, especially those for the solar-to-fuel technology. Dual-phase metal oxide composites of La0.65Sr0.35MnO3-x%CeO2, with x = 0, 5, 10, 20, 50, and 100, have been experimentally investigated for oxygen exchange and CO2 splitting via thermochemical redox reactions. The prepared metal oxide powders were tested in a temperature range from 1000 to 1400 °C under isothermal and two-step cycling conditions relevant for solar thermochemical fuel production. We reveal synergetic oxygen exchange of the dual-phase composite La0.65Sr0.35MnO3-CeO2 compared to its individual components. The enhanced oxygen exchange in the composite has a beneficial effect on the rate of oxygen release and the total CO produced by CO2 splitting, while it has an adverse effect on the maximum rate of CO evolution. Ex situ Raman and XRD analyses are used to shed light on the relative oxygen content during thermochemical cycling. Based on the relative oxygen content in both phases, we discuss possible mechanisms that can explain the observed behavior. Overall, the presented findings highlight the beneficial effects of dual-phase composites in enhancing the oxygen exchange capacity of redox materials for renewable fuel production.
ABSTRACT
Specialized hardware for neural networks requires materials with tunable symmetry, retention, and speed at low power consumption. The study proposes lithium titanates, originally developed as Li-ion battery anode materials, as promising candidates for memristive-based neuromorphic computing hardware. By using ex- and in operando spectroscopy to monitor the lithium filling and emptying of structural positions during electrochemical measurements, the study also investigates the controlled formation of a metallic phase (Li7 Ti5 O12 ) percolating through an insulating medium (Li4 Ti5 O12 ) with no volume changes under voltage bias, thereby controlling the spatially averaged conductivity of the film device. A theoretical model to explain the observed hysteretic switching behavior based on electrochemical nonequilibrium thermodynamics is presented, in which the metal-insulator transition results from electrically driven phase separation of Li4 Ti5 O12 and Li7 Ti5 O12 . Ability of highly lithiated phase of Li7 Ti5 O12 for Deep Neural Network applications is reported, given the large retentions and symmetry, and opportunity for the low lithiated phase of Li4 Ti5 O12 toward Spiking Neural Network applications, due to the shorter retention and large resistance changes. The findings pave the way for lithium oxides to enable thin-film memristive devices with adjustable symmetry and retention.
ABSTRACT
Ceria and its solid solutions play a vital role in several industrial processes and devices. These include solar energy-to-fuel conversion, solid oxide fuel and electrolyzer cells, memristors, chemical looping combustion, automotive 3-way catalysts, catalytic surface coatings, supercapacitors and recently, electrostrictive devices. An attractive feature of ceria is the possibility of tuning defect-chemistry to increase the effectiveness of the materials in application areas. Years of study have revealed many features of the long-range, macroscopic characteristics of ceria and its derivatives. In this review we focus on an area of ceria defect chemistry which has received comparatively little attention - defect-induced local distortions and short-range associates. These features are non-periodic in nature and hence not readily detected by conventional X-ray powder diffraction. We compile the relevant literature data obtained by thermodynamic analysis, Raman spectroscopy, and X-ray absorption fine structure (XAFS) spectroscopy. Each of these techniques provides insight into material behavior without reliance on long-range periodic symmetry. From thermodynamic analyses, association of defects is inferred. From XAFS, an element-specific probe, local structure around selected atomic species is obtained, whereas from Raman spectroscopy, local symmetry breaking and vibrational changes in bonding patterns is detected. We note that, for undoped ceria and its solid solutions, the relationship between short range order and cation-oxygen-vacancy coordination remains a subject of active debate. Beyond collating the sometimes contradictory data in the literature, we strengthen this review by reporting new spectroscopy results and analysis. We contribute to this debate by introducing additional data and analysis, with the expectation that increasing our fundamental understanding of this relationship will lead to an ability to predict and tailor the defect-chemistry of ceria-based materials for practical applications.
ABSTRACT
Effective integration of perovskite films into devices requires knowledge of their electro-chemomechanical properties. Raman spectroscopy is an excellent tool for probing such properties as the films' vibrational characteristics couple to the lattice volumetric changes during chemical expansion. While lattice volumetric changes are typically accessed by analyzing Raman shifts as a function of pressure, stress, or temperature, such methods can be impractical for thin films and do not capture information on chemical expansion. An in situ Raman spectroscopy technique using an electrochemical titration cell to change the oxygen nonstoichiometry of a model perovskite film, Sr(Ti,Fe)O3- y â, is reported and the lattice vibrational properties are correlated to the material's chemical expansion. How to select an appropriate Raman vibrational mode to track the evolution in oxygen nonstoichiometry is discussed. Subsequently, the frequency of the oxygen stretching mode around Fe4+ is tracked, as it decreases during reduction as the material expands and increases during reoxidation as the material shrinks. This methodology of oxygen pumping and in situ Raman spectroscopy of oxide films enables future in operando measurements even for small material volumes, as is typical for applications of films as electrodes or electrolytes utilized in electrochemical energy conversion or memory devices.
ABSTRACT
Using an epitaxial thin-film model system deposited by pulsed laser deposition (PLD), we study the Li-ion conductivity in Li4Ti5O12, a common anode material for Li-ion batteries. Epitaxy, phase purity, and film composition across the film thickness are verified employing out-of-plane and in-plane X-ray diffraction, transmission electron microscopy, time-of-flight mass spectrometry, and elastic recoil detection analysis. We find that epitaxial Li4Ti5O12 behaves like an ideal ionic conductor that is well described by a parallel RC equivalent circuit, with an ionic conductivity of 2.5 × 10-5 S/cm at 230 °C and an activation energy of 0.79 eV in the measured temperature range of 205 to 350 °C. Differently, in a co-deposited polycrystalline Li4Ti5O12 thin film with an average in-plane grain size of <10 nm, a more complex behavior with contributions from two distinct processes is observed. Ultimately, epitaxial Li4Ti5O12 thin films can be grown by PLD and reveal suitable transport properties for further implementation as zero-strain and grain boundary free anodes in future solid-state microbattery designs.
ABSTRACT
In the goal of a sustainable energy future, either the energy efficiency of renewable energy sources is increased, day-to-day energy consumption by smart electronic feedback loops is managed in a more efficient way, or contribution to atmospheric CO2 is reduced. By defining a next generation of fast-response electrochemical CO2 sensors and materials, one can contribute to local monitoring of CO2 flows from industrial plants and processes, for energy management and building control or to track climate alterations. Electrochemical Li+ -garnet-based sensors with Li7 La3 Zr2 O12 solid electrolytes can reach notable 1 min response time at lowered operation temperatures to track 400-4000 ppm levels of CO2 when compared with state-of-the-art NASICON-based sensors. By using principles of redefining the electrode electrochemistry, it is demonstrated that Li6.75 La3 Zr1.75 Ta0.25 O12 can be used to alter its classic use as energy-storage function to gain additional functions such as CO2 tracking.
ABSTRACT
Oxide-based valence-change memristors are promising nonvolatile memories for future electronics that operate on valence-change reactions to modulate their electrical resistance. The memristance is associated with the movement of oxygen ionic carriers through oxygen vacancies at high electric field strength via structural defect modifications that are still poorly understood. This study employs a Ce1-xGdxO2-y solid solution model to probe the role of oxygen vacancies either set as "free" or as "immobile and clustered" for the resistive switching performance. The experiments, together with the defect chemical model, show that when the vacancies are set as "free", a maximum in memristance is found for 20 mol % of GdO1.5 doping, which clearly coincides with the maximum in ionic conductivity. In contrast, for higher gadolinia concentration, the oxide exhibits only minor memristance, which originates from the decrease in structural symmetry, leading to the formation of "immobile" oxygen defect clusters, thereby reducing the density of mobile ionic carriers available for resistive switching. The research demonstrates guidelines for engineering of the oxide's solid solution series to set the configuration of its oxygen vacancy defects and their mobility to tune the resistive switching for nonvolatile memory and logic applications.
ABSTRACT
Ionic heterostructures are used as a strain-modulated memristive device based on the model system Gd0.1 Ce0.9 O2-δ /Er2 O3 to set and tune the property of "memristance." The modulation of interfacial strain and the interface count is used to engineer the Roff /Ron ratio and the persistence of the system. A model describing the variation of mixed ionic-electronic mobilities and defect concentrations is presented.