Acptp2,3 participates in the regulation of spore production, stress response, and pigments synthesis in Aspergillus cirstatus.

Background: Aspergillus cristatus was a filamentous fungus that produced sexual spores under hypotonic stress and asexual spores under hypertonic stress. It could be useful for understanding filamentous fungi's sporulation mechanism. Previously, we conducted functional studies on Achog1, which regulated the hyperosmotic glycerol signaling (HOG) pathway and found that SI65_02513 was significantly downregulated in the transcriptomics data of ΔAchog1 knockout strain. This gene was located at multiple locations in the HOG pathway, indicating that it might play an important role in the HOG pathway of A. cristatus. Furthermore, the function of this gene had not been identified in Aspergillus fungi, necessitating further investigation. This gene's conserved domain study revealed that it has the same protein tyrosine phosphatases (PTPs) functional domain as Saccharomyces cerevisiae, hence SI65_02513 was named Acptp2,3. Methods: The function of this gene was mostly validated using gene knockout and gene complementation approaches. Knockout strains exhibited sexual and asexual development, as well as pigments synthesis. Morphological observations of the knockout strain were carried out under several stress conditions (osmotic stress, oxidative stress, Congo Red, and sodium dodecyl sulfate (SDS). Real-time fluorescence polymerase chain reaction (PCR) identified the expression of genes involved in sporulation, stress response, and pigments synthesis. Results: The deletion of Acptp2,3 reduced sexual and asexual spore production by 4.4 and 4.6 times, demonstrating that Acptp2,3 positively regulated the sporulation of A. cristatus. The sensitivity tests to osmotic stress revealed that ΔAcptp2,3 strains did not respond to sorbitol-induced osmotic stress. However, ΔAcptp2.3 strains grew considerably slower than the wild type in high concentration sucrose medium. The ΔAcptp2,3 strains grew slower than the wild type on media containing hydrogen peroxide, Congo red, and SDS. These findings showed that Acptp2,3 favorably controlled osmotic stress, oxidative stress, and cell wall-damaging chemical stress in A. cristatus. Deleting Acptp2,3 resulted in a deeper colony color, demonstrating that Apctp2,3 regulated pigment synthesis in A. cistatus. The expression levels of numerous stress-and pigments-related genes matched the phenotypic data. Conclusion: According to our findings, Acptp2,3 played an important role in the regulation of sporulation, stress response, and pigments synthesis in A. cristatus. This was the first study on the function of PTPs in Aspergillus fungi.

FTSNet: Fundus Tumor Segmentation Network on Multiple Scales Guided by Classification Results and Prompts.

The segmentation of fundus tumors is critical for ophthalmic diagnosis and treatment, yet it presents unique challenges due to the variability in lesion size and shape. Our study introduces Fundus Tumor Segmentation Network (FTSNet), a novel segmentation network designed to address these challenges by leveraging classification results and prompt learning. Our key innovation is the multiscale feature extractor and the dynamic prompt head. Multiscale feature extractors are proficient in eliciting a spectrum of feature information from the original image across disparate scales. This proficiency is fundamental for deciphering the subtle details and patterns embedded in the image at multiple levels of granularity. Meanwhile, a dynamic prompt head is engineered to engender bespoke segmentation heads for each image, customizing the segmentation process to align with the distinctive attributes of the image under consideration. We also present the Fundus Tumor Segmentation (FTS) dataset, comprising 254 pairs of fundus images with tumor lesions and reference segmentations. Experiments demonstrate FTSNet's superior performance over existing methods, achieving a mean Intersection over Union (mIoU) of 0.8254 and mean Dice (mDice) of 0.9042. The results highlight the potential of our approach in advancing the accuracy and efficiency of fundus tumor segmentation.

Omnidirectional anisotropic embedded 3D bioprinting.

Anisotropic microstructures resulting from a well-ordered arrangement of filamentous extracellular matrix (ECM) components or cells can be found throughout the human body, including skeletal muscle, corneal stroma, and meniscus, which play a crucial role in carrying out specialized physiological functions. At present, due to the isotropic characteristics of conventional hydrogels, the construction of freeform cell-laden anisotropic structures with high-bioactive hydrogels is still a great challenge. Here, we proposed a method for direct embedded 3D cell-printing of freeform anisotropic structure with shear-oriented bioink (GelMA/PEO). This study focuses on the establishment of an anisotropic embedded 3D bioprinting system, which effectively utilizes the shear stress generated during the extrusion process to create cells encapsulating tissues with distinct anisotropy. In conjunction with the water-solubility of PEO and the in-situ encapsulation effect provided by the carrageenan support bath, high-precise cell-laden bioprinting of intricate anisotropic and porous bionic artificial tissues can be effectively implemented in one-step. Additionally, anisotropic permeable blood vessel has been taken as a representation to validate the effectiveness of the shear-oriented bioink system in fabricating intricate structures with distinct directional characteristics. Lastly, the successful preparation of muscle patches with anisotropic properties and their guiding role for cell cytoskeleton extension have provided a significant research foundation for the application of the anisotropic embedded 3D bioprinting system in the ex-vivo production and in-vivo application of anisotropic artificial tissues.

Superlong Metal-Organic Framework Nanowire Fabricated via Steam-Assisted Conversion.

1D nanomaterials have attracted great attention due to their outstanding anisotropic and linear structures. A facile method is developed to fabricate 1D copper metal-organic framework nanowires (Cu-MOF-NW) through steam-assisted conversion from Cu-MOF precursors. During the steam-assisted conversion, Cu-MOF precursor gradually dissolves in methanol steam, and then recrystallized into Cu-MOF-NW, which shows high aspect ratio of about 600 and identical crystal structure of MOF-74. As-prepared Cu-MOF-NW with multiscale porous structure can effectively remove cationic dyes even in dye mixture. Moreover, Cu-MOF-NW, as an ideal template, is calcined to form Cu nanoparticle-doped carbon nanofiber with maintaining its 1D morphology, which shows excellent electrocatalytic activity for the non-enzymatic sensing of glucose.

Direct 3D printing of freeform anisotropic bioactive structure based on shear-oriented ink system.

Various anisotropic tissue structures exist in organisms, including muscle tissue, skin tissue, and nerve tissue. Replicating anisotropic tissue structuresin vitrohas posed a significant challenge. Three-dimensional (3D) printing technology is often used to fabricate biomimetic structures due to its advantages in manufacturing principle. However, direct 3D printing of freeform anisotropic bioactive structures has not been reported. To tackle this challenge, we developed a ternary F/G/P ink system that integrates the printability of Pluronic F127 (F), the robust bioactivity and photocrosslinking properties of gelatin methacryloyl (G), and the shear-induced alignment functionality of high-molecular-weight polyethylene glycol (P). And through this strategic ternary system combination, freeform anisotropic tissue structures can be 3D printed directly. Moreover, these anisotropic structures exhibit excellent bioactivity, and promote orientational growth of different cells. This advancement holds promise for the repair and replacement of anisotropic tissues within the human body.

Redox Concomitant Formation Method for Fabrication of Cu(I)-MOF/Polymer Composites with Antifouling Properties.

Marine biofouling, which is one of the technical challenges hindering the growth of the marine economy, has been controlled using cuprous oxide (Cu2O) nanoparticles due to the exceptional antifouling properties of Cu(I) ions. However, Cu2O nanoparticles have encountered bottlenecks due to explosive releases of Cu+ ions, high toxicity at elevated doses, and long-term instability. Here, we present a novel method called Redox Concomitant Formation (RCF) for fabricating a hierarchical Cu(I) metal-organic framework polypyrrole (Cu(I)-MOF/PPy) composite. This method enables in-situ phase transition via successive redox reactions that change the chemical valence state and coordination mode of Cu(II)-MOF, resulting in a new structure of Cu(I)-MOF while creating a PPy layer surrounded by the hierarchical structure. Owing to the steady release of Cu+ ions from the Cu(I) sites and photothermal properties of PPy, Cu(I)-MOF/PPy exhibits superior and broad-spectrum resistance to marine bacteria, algae, and surface-adhered biofilms in complex biological environments, as well as long-term stability, resulting in 100% eradication efficiency under solar-driven heating. Mechanistic insights into successive structural redox reactions and formation using the RCF method are provided in detail, enabling the fabrication of novel MOFs with the desired composition and structure for a wide range of potential applications.

Dynamic imaging of micro-vibrations with an ultra-wide bandwidth and a femtometer noise using switchable pulsed laser interferometry.

Imaging the complex dynamics of micro-vibrations plays a fundamental role in the investigation of microelectromechanical systems (MEMS). However, it remains a challenge for achieving both a wide bandwidth and a low noise due to the high photodetector noise and electromagnetic interference at GHz frequencies. Here, we propose a pulsed laser interferometry system with an adaptable switch to image GHz vibrations based on stroboscopic mixing, while measuring lower-frequency vibrations based on the homodyne scheme. The noise power spectral density is shown in both regions from DC to 10 GHz with an average noise down to 30.8 fm/√Hz at GHz frequencies, which holds the highest resolution to the best of our knowledge. Vibrational amplitude and phase mappings of a kHz comb-drive resonator, a GHz piezoelectric transducer, and a GHz film bulk acoustic resonator are presented with animated visualizations and k-space analysis, paving a new paradigm for the first time to image and analyze various MEMS devices of a bandwidth spanning 10 orders of magnitude.

An intelligent spinal soft robot with self-sensing adaptability.

Self-sensing adaptability is a high-level intelligence in living creatures and is highly desired for their biomimetic soft robots for efficient interaction with the surroundings. Self-sensing adaptability can be achieved in soft robots by the integration of sensors and actuators. However, current strategies simply assemble discrete sensors and actuators into one robotic system and, thus, dilute their synergistic and complementary connections, causing low-level adaptability and poor decision-making capability. Here, inspired by vertebrate animals supported by highly evolved backbones, we propose a concept of a bionic spine that integrates sensing and actuation into one shared body based on the reversible piezoelectric effect and a decoupling mechanism to extract the environmental feedback. We demonstrate that the soft robots equipped with the bionic spines feature locomotion speed improvements between 39.5% and 80% for various environmental terrains. More importantly, it can also enable the robots to accurately recognize and actively adapt to changing environments with obstacle avoidance capability by learning-based gait adjustments. We envision that the proposed bionic spine could serve as a building block for locomotive soft robots toward more intelligent machine-environment interactions in the future.

Olgotrelvir as a Single-Agent Treatment of Nonhospitalized Patients with Covid-19.

BACKGROUND: Olgotrelvir is an oral antiviral with dual mechanisms of action targeting severe acute respiratory syndrome coronavirus 2 main protease (i.e., Mpro) and human cathepsin L. It has potential to serve as a single-agent treatment of coronavirus disease 2019 (Covid-19). METHODS: We conducted a phase 3, double-blind, randomized, placebo-controlled trial to evaluate the efficacy and safety of olgotrelvir in 1212 nonhospitalized adult participants with mild to moderate Covid-19, irrespective of risk factors, who were randomly assigned to receive orally either 600 mg of olgotrelvir or placebo twice daily for 5 days. The primary and key secondary end points were time to sustained recovery of a panel of 11 Covid-19-related symptoms and the viral ribonucleic acid (RNA) load. The safety end point was incidence of treatment-emergent adverse events. RESULTS: The baseline characteristics of 1212 participants were similar in the two groups. In the modified intention-to-treat population (567 patients in the placebo group and 558 in the olgotrelvir group), the median time to symptom recovery was 205 hours in the olgotrelvir group versus 264 hours in the placebo group (hazard ratio, 1.29; 95% confidence interval [CI], 1.13 to 1.46; P<0.001). The least squares mean (95% CI) changes of viral RNA load from baseline were -2.20 (-2.59 to -1.81) log10 copies/ml in olgotrelvir-treated participants and -1.40 (-1.79 to -1.01) in participants receiving placebo at day 4. Skin rash (3.3%) and nausea (1.5%) were more frequent in the olgotrelvir group than in the placebo group; there were no treatment-related serious adverse events, and no deaths were reported. CONCLUSIONS: Olgotrelvir as a single-agent treatment significantly improved symptom recovery. Adverse effects were not dose limiting. (Funded by Sorrento Therapeutics, a parent company of ACEA Therapeutics; ClinicalTrials.gov number, NCT05716425.).

GhWER controls fiber initiation and early elongation by regulating ethylene signaling pathway in cotton (Gossypium hirsutum).

Cotton fibers are specialized single-cell trichomes derived from epidermal cells, similar to root hairs and trichomes in Arabidopsis. While the MYB-bHLH-WD40 (MBW) complex has been shown to regulate initiation of both root hairs and trichomes in Arabidopsis, the role of their homologous gene in cotton fiber initiation remains unknown. In this study, we identified a R2R3 MYB transcription factor (TF), GhWER, which exhibited a significant increase in expression within the outer integument of ovule at -1.5 DPA (days post anthesis). Its expression peaked at -1 DPA and then gradually decreased. Knockout of GhWER using CRISPR technology inhibited the initiation and early elongation of fiber initials, resulting in the shorter mature fiber length. Additionally, GhWER interacted with two bHLH TF, GhDEL65 and GhbHLH121, suggesting a potential regulatory complex for fiber development. RNA-seq analysis of the outer integument of the ovule at -1.5 DPA revealed that the signal transduction pathways of ethylene, auxin and gibberellin were affected in the GhWER knockout lines. Further examination demonstrated that GhWER directly activated ethylene signaling genes, including ACS1 and ETR2. These findings highlighted the biological function of GhWER in regulating cotton fiber initiation and early elongation, which has practical significance for improving fiber quality and yield. Supplementary Information: The online version contains supplementary material available at 10.1007/s11032-024-01477-6.

Effects of Ultrasonic Treatment on Physical Stability of Lily Juice: Rheological Behavior, Particle Size, and Microstructure.

The aim of this study was to investigate the rheological properties, particle size distribution, color change, and stability of lily juice under different ultrasonic treatment conditions (152 W, 304 W, 456 W, 608 W, and 760 W). The results showed that the lily juice exhibited non-Newtonian shear thinning behavior, and the viscosity decreased with the increase in ultrasonic power. Under ultrasonic treatment conditions, there was no significant change in the pH value and zeta potential value of the samples. The content of cloudy value and total soluble solids (TSS) increased gradually. However, both the sedimentation components and centrifugal sedimentation rate showed a downward trend and an asymptotic behavior. In addition, high-power ultrasound changed the color index (L* value decreased, a* value increased), tissue structure, and particle distribution of the sample, and small particles increased significantly. To sum up, ultrasonic treatment has great potential in improving the physical properties and suspension stability of lily juice.

A MOF nanoparticle@carbon aerogel integrated photothermal catalytic microreactor for CO2 utilization.

A practical carbon dioxide (CO2) conversion and utilization system shows great potential for ameliorating the greenhouse effect. Herein, an integrated carbon aerogel-based photothermal catalysis microreactor with photothermal conversion, enhanced mass transfer adsorption and a thermal catalytic reactor is designed. As a solar-powered CO2 utilization module, this microreactor can conveniently convert CO2 into economically valuable products without elaborate equipment and operation processes.

Acevaltrate promotes apoptosis and inhibits proliferation by suppressing HIF-1α accumulation in cancer cells.

Acevaltrate is a natural product isolated from the roots of Valeriana glechomifolia F.G.Mey. (Valerianaceae) and has been shown to exhibit anti-cancer activity. However, the mechanism by which acevaltrate inhibits tumor growth is not fully understood. We here demonstrated the effect of acevaltrate on hypoxia-inducible factor-1α (HIF-1α) expression. Acevaltrate showed a potent inhibitory activity against HIF-1α induced by hypoxia in various cancer cells. This compound markedly decreased the hypoxia-induced accumulation of HIF-1α protein dose-dependently. Further analysis revealed that acevaltrate inhibited HIF-1α protein synthesis and promoted degradation of HIF-1α protein, without affecting the expression level of HIF-1α mRNA. Moreover, the phosphorylation levels of mammalian target of rapamycin (mTOR), ribosomal protein S6 kinase (p70S6K), and eIF4E binding protein-1 (4E-BP1) were significantly suppressed by acevaltrate. In addition, acevaltrate promoted apoptosis and inhibited proliferation, which was potentially mediated by suppression of HIF-1α. We also found that acevaltrate administration inhibited tumor growth in mouse xenograft model. Taken together, these results suggested that acevaltrate was a potent inhibitor of HIF-1α and provided a new insight into the mechanisms of acevaltrate against cancers.

A Soft Collaborative Robot for Contact-based Intuitive Human Drag Teaching.

Soft material-based robots, known for their safety and compliance, are expected to play an irreplaceable role in human-robot collaboration. However, this expectation is far from real industrial applications due to their complex programmability and poor motion precision, brought by the super elasticity and large hysteresis of soft materials. Here, a soft collaborative robot (Soft Co-bot) with intuitive and easy programming by contact-based drag teaching, and also with exceptional motion repeatability (< 0.30% of body length) and ultra-low hysteresis (< 2.0%) is reported. Such an unprecedented capability is achieved by a biomimetic antagonistic design within a pneumatic soft robot, in which cables are threaded to servo motors through tension sensors to form a self-sensing system, thus providing both precise actuation and dragging-aware collaboration. Hence, the Soft Co-bots can be first taught by human drag and then precisely repeat various tasks on their own, such as electronics assembling, machine tool installation, etc. The proposed Soft Co-bots exhibit a high potential for safe and intuitive human-robot collaboration in unstructured environments, promoting the immediate practical application of soft robots.

Prognostic value of PAX8 in small cell lung cancer.

Objectives: Small cell lung cancer (SCLC) shows poor prognosis since it metastasizes widely at early stage. Paired box gene (PAX) 8 is a transcriptional factor of PAX family, of which the expression in lung cancer is a controversial issue, and its prognostic value of PAX8 in SCLC is still unclear. Materials and methods: Overall, 184 subjects who were pathologically diagnosed with SCLC were enrolled in the study. Immunohistochemical analysis of PAX8 and Ki-67 were performed. The correlations between PAX8 expression and clinical features or Ki-67 index were further analyzed. Subsequently, an analysis of the association between PAX8, stage, Ki-67 status, and overall survival (OS) were performed in 169 subjects with follow-up information. Results: PAX8 was positive in 53.8% (99/184) SCLC specimens. The positive rate is significantly higher in extensive-stage specimens (61.0%) than in limited-stage specimens (45.24%). PAX8 expression is positively correlated with Ki-67 index (P = 0.001) while negatively correlated with OS (HR = 3.725, 95% CI 1.943-7.139, P＜0.001). In combination groups, the PAX8 negative and limited stage group had the most promising OS. Conclusion: PAX8 expression rate in SCLC specimens is not low. It has prognostic value in small cell lung cancer.

Optical Coupling in Atomic Waveguide for Vertically Integrated Photonics.

Integrated 2-dimensional (2D) photonic devices such as monolayer waveguide has generated exceptional interest because of their ultimate thinness. In particular, they potentially permit stereo photonic architecture through bond-free van der Waals integration. However, little is known about the coupling and controlling of the single-atom guided wave to its photonic environment, which governs the design and application of integrated system. Here, we report the optical coupling of atomically guided waves to other photonic modes. We directly probe the mode beating between evanescent waves in a monolayer 2D waveguide and a silicon photonic waveguide, which constitutes a vertically integrated interferometer. The mode-coupling measures the dispersion relation of the guided wave inside the atomic waveguide and unveils it strongly modifies matter's electronic states, manifesting by the formation of a propagating polariton. We also demonstrated light modulating and spectral detecting in this compact nonplanar interferometer. These findings provide a generalizable and versatile platform toward monolithic 3-dimensional integrated photonics.

The Long-Term Effect of Early-Life Uncertainty on Mental Health in Adolescence and Adulthood: A Meta-Analysis.

Turbulent changes in early life are a hidden source of childhood trauma, increasing potential risks for mental illness. Many studies have identified the link between childhood uncertainty and mental health. However, research on the long-term effect of early-life uncertainty (EU) on mental health has not been systematically synthesized. This meta-analysis aims to provide a quantitative estimate of the association between EU and subsequent mental health outcomes. Eight electronic databases and gray literature were searched. Twenty-eight studies met our inclusion criteria: samples of non-clinical adolescents or adults and clear and valid assessments. Random-effect models were used to calculate the pooled effect sizes of EU on internalizing problems, externalizing problems, and well-being. Meta-regression and subgroup analysis were used to explore potential moderators. Results indicated small to moderate associations involving EU and internalizing problem (r = .28; 95% confidence interval [CI] [0.228, 0.326]) and externalizing problem (r = .16; 95% CI [0.102, 0.220]). EU was not significantly associated with well-being (r = -.41; 95% CI [-0.738, 0.071]). Furthermore, moderator analyses found that composite uncertain experiences in childhood had a stronger negative effect than single experiences. EU was a stronger predictor of mental health problems in adults than in adolescents. Cross-sectional studies would amplify the correlation between EU and mental illness compared to longitudinal studies. In the future, childhood uncertain and unpredictable risks should receive more attention. More research needs to focus on positive psychological indicators and samples from non-Western countries.

Construction methods and biomedical applications of PVA-based hydrogels.

Polyvinyl alcohol (PVA) hydrogel is favored by researchers due to its good biocompatibility, high mechanical strength, low friction coefficient, and suitable water content. The widely distributed hydroxyl side chains on the PVA molecule allow the hydrogels to be branched with various functional groups. By improving the synthesis method and changing the hydrogel structure, PVA-based hydrogels can obtain excellent cytocompatibility, flexibility, electrical conductivity, viscoelasticity, and antimicrobial properties, representing a good candidate for articular cartilage restoration, electronic skin, wound dressing, and other fields. This review introduces various preparation methods of PVA-based hydrogels and their wide applications in the biomedical field.

High-quality genomes of Bombax ceiba and Ceiba pentandra provide insights into the evolution of Malvaceae species and differences in their natural fiber development.

Members of the Malvaceae family, including Corchorus spp., Gossypium spp., Bombax spp., and Ceiba spp., are important sources of natural fibers. In the past decade, the genomes of several Malvaceae species have been assembled; however, the evolutionary history of Malvaceae species and the differences in their fiber development remain to be clarified. Here, we report the genome assembly and annotation of two natural fiber plants from the Malvaceae, Bombax ceiba and Ceiba pentandra, whose assembled genome sizes are 783.56 Mb and 1575.47 Mb, respectively. Comparative analysis revealed that whole-genome duplication and Gypsy long terminal repeat retroelements have been the major causes of differences in chromosome number (2n = 14 to 2n = 96) and genome size (234 Mb to 2676 Mb) among Malvaceae species. We also used comparative genomic analyses to reconstruct the ancestral Malvaceae karyotype with 11 proto-chromosomes, providing new insights into the evolutionary trajectories of Malvaceae species. MYB-MIXTA-like 3 is relatively conserved among the Malvaceae and functions in fiber cell-fate determination in the epidermis. It appears to perform this function in any tissue where it is expressed, i.e. in fibers on the endocarp of B. ceiba and in ovule fibers of cotton. We identified a structural variation in a cellulose synthase gene and a higher copy number of cellulose synthase-like genes as possible causes of the finer, less spinnable, weaker fibers of B. ceiba. Our study provides two high-quality genomes of natural fiber plants and offers insights into the evolution of Malvaceae species and differences in their natural fiber formation and development through multi-omics analysis.

Carrimycin in the treatment of acute promyelocytic leukemia combined with pulmonary tuberculosis: A case report.

BACKGROUND: Pulmonary tuberculosis (PTB) is prevalent in immunocompromised populations, including patients with hematologic malignancies, human immunodeficiency virus infections, and chronic diseases. Effective treatment for acute promyelocytic leukemia (APL) combined with PTB is lacking. These patients show an extremely poor prognosis. Therefore, studies should establish efficient treatment options to improve patient survival and prognosis. CASE SUMMARY: A 60-year-old male with pain in the right side of his chest and a fever for 4 d visited the outpatient department of our hospital. Peripheral blood smear revealed 54% blasts. Following bone marrow examinations, variant APL with TNRC18-RARA fusion gene was diagnosed. Chest computed tomography scan showed bilateral pneumonitis with bilateral pleural effusions, partial atelectasis in the lower lobes of both lungs, and the bronchoalveolar lavage fluid gene X-Pert test was positive, indicative of PTB. Carrimycin, ethambutol (EMB), and isoniazid (INH) were administered since he could not receive chemotherapy as the WBC count decreased continuously. After one week of treatment with carrimycin, the patient recovered from fever and received chemotherapy. Chemotherapy was very effective and his white blood cells counts got back to normal. After being given five months with rifampin, EMB and INH and chemotherapy, the patient showed complete remission from pneumonia and APL. CONCLUSION: We report a case of PTB treated successfully with carrimycin with APL that requires chemotherapy.