Are we tackle ready? Cross-sectional video analysis of match tackle characteristics in elite women's Rugby Union.

The tackle contest is the most common and most injurious match contact event in rugby and is an indicator of performance. Tackle Ready is World Rugby's tackle technique education program. Limited research has characterized the tackle contest in women's rugby. The purpose of this study is to: (1) identify the match situational characteristics, ball-carrier and tackler technical actions demonstrated in elite women's Rugby Union and (2) to determine the extent to which Tackle Ready recommended tackle techniques were exhibited. Technical characteristics for 1500 tackle events in the 2022-2023 Women's Six Nations Championship were visually assessed according to a predefined coding framework and the Tackle Ready program. Tackles lacked full completion (0.2%) of the 22 coded Tackle Ready techniques with 47% of the recommended techniques demonstrated in each tackle on average (range 15%-98%). A high proportion of tackles involved two defenders (48%), approaching ball-carriers from the side (38%) or oblique angles (39%), in an upright position (30%), and with initial contact made with the arm (51%). Incorrect pre-contact head positioning and head placement upon contact accounted for 50% and 15% of tackles, respectively, and there was a mean of 14 (95% CI 11-18) head and neck contacts to a tackler and 18 (95% CI 14-22) head and neck contacts to a ball-carrier per game. Targeted interventions to encourage adoption of recommended techniques are needed to reduce tackle-related injury risk in women's rugby. This study provides valuable context for future discussion across law enforcement, coach education and gender-specific tackle coaching in the women's game.

Validated numerical unrestrained occupant-seat crash scenarios for high-speed trains integrating experimental, computational, and inverse methods.

OBJECTIVE: Occupant impact safety is critical for train development. This paper proposes a systematic procedure for developing validated numerical occupant crash scenarios for high-speed trains by integrating experimental, computational, and inverse methods. METHODS: As the train interior is the most potentially injury-causing factor, the material properties were acquired by mechanical tests, and constitutive models were calibrated using inverse methods. The validity of the seat material constitutive model was further verified via drop tower tests. Finite element (FE) and multibody (MB) models of train occupant-seat interactions in frontal impact were established in LS-DYNA and MADYMO software, respectively, using the experimentally acquired materials/mechanical characteristics. Three dummy sled crash tests with different folding table and backrest configurations were conducted to validate the numerical occupant-seat models and to further assess occupant injury in train collisions. The occupant impact responses between dummy tests and simulations were quantitatively compared using a correlation and analysis (CORA) objective rating method. RESULTS: Results indicated that the experimentally calibrated numerical seat-occupant models could effectively reproduce the occupant responses in bullet train collisions (CORA scores >80%). Compared with the train seat-occupant MB model, the FE model could simulate the head acceleration with slightly more acceptable fidelity, however, the FE model CORA scores were slightly less than for the MB models. The maximum head acceleration was 30 g but the maximum HIC score was 17.4. When opening the folding table, the occupant's chest injury was not obvious, but the neck-table contact and "chokehold" may potentially be severe and require further assessment. CONCLUSIONS: This study demonstrates the value of experimental data for occupant-seat model interactions in train collisions and provides practical help for train interior safety design and formulation of standards for rolling stock interior passive safety.

Exercise quantification from single camera view markerless 3D pose estimation.

Sports physiotherapists and coaches are tasked with evaluating the movement quality of athletes across the spectrum of ability and experience. However, the accuracy of visual observation is low and existing technology outside of expensive lab-based solutions has limited adoption, leading to an unmet need for an efficient and accurate means to measure static and dynamic joint angles during movement, converted to movement metrics useable by practitioners. This paper proposes a set of pose landmarks for computing frequently used joint angles as metrics of interest to sports physiotherapists and coaches in assessing common strength-building human exercise movements. It then proposes a set of rules for computing these metrics for a range of common exercises (single and double drop jumps and counter-movement jumps, deadlifts and various squats) from anatomical key-points detected using video, and evaluates the accuracy of these using a published 3D human pose model trained with ground truth data derived from VICON motion capture of common rehabilitation exercises. Results show a set of mathematically defined metrics which are derived from the chosen pose landmarks, and which are sufficient to compute the metrics for each of the exercises under consideration. Comparison to ground truth data showed that root mean square angle errors were within 10° for all exercises for the following metrics: shin angle, knee varus/valgus and left/right flexion, hip flexion and pelvic tilt, trunk angle, spinal flexion lower/upper/mid and rib flare. Larger errors (though still all within 15°) were observed for shoulder flexion and ASIS asymmetry in some exercises, notably front squats and drop-jumps. In conclusion, the contribution of this paper is that a set of sufficient key-points and associated metrics for exercise assessment from 3D human pose have been uniquely defined. Further, we found generally very good accuracy of the Strided Transformer 3D pose model in predicting these metrics for the chosen set of exercises from a single mobile device camera, when trained on a suitable set of functional exercises recorded using a VICON motion capture system. Future assessment of generalization is needed.

Forward dynamics computational modelling of a cyclist fall with the inclusion of protective response using deep learning-based human pose estimation.

Single bicycle crashes, i.e., falls and impacts not involving a collision with another road user, are a significantly underestimated road safety problem. The motions and behaviours of falling people, or fall kinematics, are often investigated in the injury biomechanics research field. Understanding the mechanics of a fall can help researchers develop better protective gear and safety measures to reduce the risk of injury. However, little is known about cyclist fall kinematics or dynamics. Therefore, in this study, a video analysis of cyclist falls is performed to investigate common kinematic forms and impact patterns. Furthermore, a pipeline involving deep learning-based human pose estimation and inverse kinematics optimisation is created for extracting human motion from real-world footage of falls to initialise forward dynamics computational human body models. A bracing active response is then optimised for using a genetic algorithm. This is then applied to a case study of a cyclist fall. The kinematic forms characterised in this study can be used to inform initial conditions for computational modelling and injury estimation in cyclist falls. Findings indicate that protective response is an important consideration in fall kinematics and dynamics, and should be included in computational modelling. Furthermore, the novel reconstruction pipeline proposed here can be applied more broadly for traumatic injury biomechanics tasks. The tool developed in this study is available at https://kevgildea.github.io/KinePose/.

Computer vision-based assessment of cyclist-tram track interactions for predictive modeling of crossing success.

INTRODUCTION: Single Bicycle Brashes (SBCs) are common, and underreported in official statistics. In urban environments, light rail tram tracks are a frequent factor, however, they have not yet been the subject of engineering analysis. METHOD: This study employs video-based analysis at nine Dublin city centre locations and introduces a predictive model for crossing success on tram tracks, utilising cyclist crossing angles within a Surrogate Measure of Safety (SMoS) framework. Additionally, Convolutional Neural Networks (CNNs) were explored for automatic estimation of crossing angles. RESULTS: Modelling results indicate that cyclist crossing angle is a strong predictor of crossing success, and that cyclist velocity is not. Findings also highlight the prevalence of external factors which limit crossing angles for cyclists. In particular, kerbs are a common factor, along with passing/approaching vehicles or other cyclists. Furthermore, results indicate that further training on a relatively small sample of 100 domain-specific examples can achieve substantial accuracy improvements for cyclist detection (from 0.31AP0.5 to 0.98AP0.5) and crossing angle inference from traffic camera footage. CONCLUSIONS: Ensuring safe crossing angles is important for cyclist safety around tram tracks. Infrastructural planners should aim for intuitive, self-explainable road layouts that allow for and encourage crossing angles of 60° or more - ideally 90°. PRACTICAL APPLICATIONS: The SMoS framework and the open-source SafeCross1 application offer actionable insights and tools for enhancing cyclist safety around tram tracks.

Skeletal muscle extracellular matrix structure under applied deformation observed using second harmonic generation microscopy.

The mechanical and structural properties of passive skeletal muscle are important for musculoskeletal models in impact biomechanics, rehabilitation engineering and surgical simulation. Passive properties of skeletal muscle depend strongly on the architecture of the extracellular matrix (ECM), but the structure of ECM and its realignment under applied deformation remain poorly understood. We apply second harmonic generation (SHG) microscopy to study muscle ECM in intact muscle samples both under deformation and in the undeformed state. A method for regional relocation was developed, so that the same ECM segment could be viewed before and after applying deformations. Skeletal muscle ECM was viewed at multiple scales and in three states: undeformed, under compression and under tension. Results show that second harmonic generation microscopy provides substantial detail of skeletal muscle ECM over a wide range of length scales, especially the perimysium structure. We present images of individual portions of skeletal muscle ECM both undeformed and subjected to tensile/compressive deformation. We also present data showing the response of the perimysium to a partial thickness cut applied to a section under tensile deformation. STATEMENT OF SIGNIFICANCE: Second Harmonic Generation (SHG) microscopy is an imaging technique which takes advantage of a non-linear and coherent frequency doubling optical effect that is present in a small number of biological molecules, primarily collagen Type I, II and myosin. Collagen I is the most abundant collagen type in skeletal muscle, making SHG a promising option for visualisation of the skeletal muscle extracellular matrix (ECM). SHG microscopy does not require fixing or staining. This short communication presents the application of SHG microscopy to skeletal muscle ECM to improve our understanding of how collagen fibres reorganise under applied tensile and compression, including microscopic observations of collagen fibre reorganisation for intact samples by using a method to re-identify specific regions in repeated deformation tests.

Prophylactic onlay mesh placement techniques for optimal abdominal wall closure: randomized controlled trial in an ex vivo biomechanical model.

BACKGROUND: Incisional hernias occur after up to 40 per cent of laparotomies. Recent RCTs have demonstrated the role of prophylactic mesh placement in reducing the risk of developing an incisional hernia. An onlay approach is relatively straightforward; however, a variety of techniques have been described for mesh fixation. The biomechanical properties have not been interrogated extensively to date. METHODS: This ex vivo randomized controlled trial using porcine abdominal wall investigated the biomechanical properties of three techniques for prophylactic onlay mesh placement at laparotomy closure. A classical onlay, anchoring onlay, and novel bifid onlay approach were compared with small-bite primary closure. A biomechanical abdominal wall model and ball burst test were used to assess transverse stretch, bursting force, and loading characteristics. RESULTS: Mesh placement took an additional 7-15 min compared with standard primary closure. All techniques performed similarly, with no clearly superior approach. The minimum burst force was 493 N, and the maximum 1053 N. The classical approach had the highest mean burst force (mean(s.d.) 853(152) N). Failure patterns fell into either suture-line or tissue failures. Classical and anchoring techniques provided a second line of defence in the event of primary suture failure, whereas the bifid method demonstrated a more compliant loading curve. All mesh approaches held up at extreme quasistatic loads. CONCLUSION: Subtle differences in biomechanical properties highlight the strengths of each closure type and suggest possible uses. The failure mechanisms seen here support the known hypotheses for early fascial dehiscence. The influence of dynamic loading needs to be investigated further in future studies.

Assessment of deep learning pose estimates for sports collision tracking.

Injury assessment during sporting collisions requires estimation of the associated kinematics. While marker-based solutions are widely accepted as providing accurate and reliable measurements, setup times are lengthy and it is not always possible to outfit athletes with restrictive equipment in sporting situations. A new generation of markerless motion capture based on deep learning techniques holds promise for enabling measurement of movement in the wild. The aim of this work is to evaluate the performance of a popular deep learning model "out of the box" for human pose estimation, on a dataset of ten staged rugby tackle movements performed in a marker-based motion capture laboratory with a system of three high-speed video cameras. An analysis of the discrepancy between joint positions estimated by the marker-based and markerless systems shows that the deep learning approach performs acceptably well in most instances, although high errors exist during challenging intervals of heavy occlusion and self-occlusion. In total, 75.6% of joint position estimates are found to have a mean absolute error (MAE) of less than or equal to 25 mm, 17.8% with MAE between 25 and 50 mm and 6.7% with MAE greater than 50 mm. The mean per joint position error is 47 mm.

Physical and Technical Demands and Preparatory Strategies in Female Field Collision Sports: A Scoping Review.

Women's participation in field collision sports is growing worldwide. Scoping reviews provide an overview of scientific literature in a developing area to support practitioners, policy, and research priorities. Our aim is to explore published research and synthesise information on the physical and technical demands and preparation strategies of female field collision sports. We searched four databases and identified relevant published studies. Data were extracted to form (1) a numerical analysis and (2) thematic summary. Of 2318 records identified, 43 studies met the inclusion criteria. Physical demands were the most highly investigated (n+=+24), followed by technical demands (n+= 18), tactical considerations (n+=+8) and preparatory strategies (n=1). The key themes embody a holistic model contributing to both performance and injury prevention outcomes in the context of female field collision sports. Findings suggest a gender data gap across all themes and a low evidence base to inform those preparing female athletes for match demands. Given the physical and technical differences in match-demands the review findings do not support the generalisation of male-derived training data to female athletes. To support key stakeholders working within female field collision sports there is a need to increase the visibility of female athletes in the literature.

Skeletal muscle surrogates for the acquisition of muscle repair skills in upper limb surgery.

INTRODUCTION: The required fidelity of synthetic materials in surgical simulators to teach tissue handling and repair requirements should be as accurate as possible. There is a poor understanding of the relationship between choice of muscle surrogates and training outcome for trainee surgeons. To address this, the mechanical characteristics of several candidate synthetic muscle surrogates were measured, and their subjective biofidelity was qualitatively assessed by surgeons. METHODS: Silicone was selected after assessing several material options and 16 silicone-based surrogates were evaluated. Three of the closest samples to muscle (Samples 1.1, 1.2, 1.3) and one with inserted longitudinal fibres (1.2F) were mechanically tested in the following: compression and tension, needle puncture force and suture pull-out in comparison with real muscle. The four samples were evaluated by 17 Plastic and Orthopaedic surgeons to determine their views of the fidelity with regard to the handling properties, needle insertion and ease of suture pull-out. RESULTS: The mechanical testing showed the surrogates exhibited varying characteristics that matched some of the properties of muscle, though none recreated all the mechanical characteristics of native muscle. Good biofidelity was generally achieved for compression stiffness and needle puncture force, but it was evident that tensile stiff was too low for all samples. The pull-out forces were variable and too low, except for the sample with longitudinal fibres. In the qualitative assessment, the overall median scores for the four surrogate samples were all between 30 and 32 (possible range 9-45), indicating limited differentiation of the samples tested by the surgeons. CONCLUSIONS: The surrogate materials showed a range of mechanical properties bracketing those of real muscle, thus presenting a suitable combination of candidates for use in simulators to attain the requirements as set out in the learning outcomes of muscle repair. However, despite significant mechanical differences between the samples, all surgeons found the samples to be similar to each other.

Simulation in Upper and Lower Limb Trauma Skill Acquisition: A Review.

SUMMARY STATEMENT: This review aimed to explore the published evidence with regard to the types and composition of both full- and part-task trainers to teach surgeons extremity exploration procedures in limb trauma management. Studies were included if they reported the development and/or validation of synthetic or virtual task trainers. Studies were evaluated to determine their derivation, usability, and clinical utility.A total of 638 citations were identified and 63 satisfied the inclusion criteria. Twenty-five articles addressed simulator validation and 36 addressed level of learning achieved with simulator engagement. Two studies described a dedicated limb simulator. Simulators were developed to repair limb structures including skin (n = 15), tendon (n = 7), nerve (n = 1), fascia (n = 1), muscle (n = 1), vascular (n = 24), and bone (n = 11). Considerations such as material fidelity, learning outcomes, cost or reusability, validity, and effectiveness are inconsistently reported. Future studies should address design standards for the effective production of synthetic or virtual simulators for limb trauma management.

It's not all about power: a systematic review and meta-analysis comparing sex-based differences in kicking biomechanics in soccer.

Kicking is fundamental in many field-based sports. Most studies investigating kicking performance have been conducted with male athletes, resulting in a dearth of specific data to inform coaching of this skill in female players. This systematic review aimed to compare kicking biomechanics in male and female athletes in field-based sports. As per PRISMA guidelines, articles were retrieved from searches across five online databases. Studies investigating kicking biomechanics in field-based athletes of both sexes were eligible for inclusion. Articles were screened using Covidence and data extracted based on STROBE recommendations. The review included 23 studies, featuring 455 soccer players. Male athletes produced significantly greater ball velocities and linear velocities of the ankle, foot, and toe than females. Males had greater ankle plantarflexion angles than females at ball strike, while females used larger trunk flexion ranges than males. Hip and knee torques and ball-to-foot velocity ratios were greater in men than women. Skilled players generated power using tension arcs; a technique not seen in novices. Skill level within sex may have a greater influence on kicking performance than differences between the sexes. This review highlights the need for further research investigating kicking performance in both sexes across the spectrum of sports.

Configurations of underreported cyclist-motorised vehicle and single cyclist collisions: Analysis of a self-reported survey.

Lower severity cycling collisions, and single cyclist collisions (or single bicycle crashes) are significantly underreported in police statistics, introducing biases into the types of collisions that are available for analysis. Furthermore, many lower severity collisions do not appear in other collision data sources (e.g. hospital and insurance data). This in turn affects priorities for cyclist safety and puts an underemphasis on certain collision types. Due to an absence of data, little is known of the configurations of unreported collisions. In this paper, data from a recent self-reporting survey of cycling collisions in Ireland is used to provide details of cyclist collisions with motorised vehicles and single cyclist collisions, with the inclusion of unreported collision types. Pre-crash scenarios and impact configurations for cyclist collisions with bonnet-type vehicles, and collision factors and fall types for single cyclist collisions are coded. Injury patterns and police underreporting levels are compared, and representative collision scenarios are identified. This study highlights the relative importance of collisions resulting from the cyclist and vehicle travelling in the same direction, specifically, nearside-hook, vehicle lane changing, and overtaking manoeuvres are emphasised. Furthermore, cases involving the cyclist struck from the side by vehicle fronts comprise a smaller share than previous studies. Specifically, side to side impacts, impacts between the front of the cyclist/bicycle and the side of the vehicle, and impacts with open(ing) doors emerge as important impact configurations with the inclusion of self-reported cases. For single cyclist collisions, the importance of loss of traction of the tyres due to slippery road conditions and interactions with tram tracks and kerbs are emphasised. Fall types differ between single cyclist collision scenarios and are related to differences in injury severity. These findings add to existing knowledge for fatal and higher severity collisions, demonstrating that cyclist safety priorities change with inclusion of underreported, and lower severity collisions. The findings are particularly relevant to road infrastructural planners, as well as in the fields of injury biomechanics, and automated vehicle safety (ADAS). Representative scenarios for collisions with bonnet-type vehicles and single cyclist collisions have been identified, allowing for their future inclusion in development of collision and injury prevention strategies. The dataset generated in this study is available from the authors on reasonable request.

Characteristics of cyclist collisions in Ireland: Analysis of a self-reported survey.

As both a utility mode of transport and recreational activity, cycling has well-known health, environmental, and economic benefits. For these reasons it has been encouraged in many countries, including the Republic of Ireland. However, with increasing popularity there have been concurrent increases in road traffic related cyclist injuries. This study aims to characterise cyclist collisions, which are known to be underreported in Police statistics. For data collection, a survey addressing collisions was distributed to cyclists across the country in 2018. Univariable testing was used to identify differences in collision factors and injury outcomes for cyclist collisions with motorised vehicles, and those where a motorised vehicle is not involved as a collision partner i.e. single cyclist, cyclist-pedestrian, or cyclist-cyclist collisions. Furthermore, binary logistic regression modelling was used to clarify biasing factors for Police reporting of collisions. The largest proportion of collisions was between cyclists and motorised vehicles (56%), followed by single cyclist collisions (29%), collisions with other cyclists (8%), and pedestrians (7%). The odds of Police reporting for collisions with motorised vehicles in this study was 20 times greater than single cyclist collisions, 10 times greater than cyclist-cyclist collisions, and 4 times greater than collisions with pedestrians. The odds of Police reporting of serious injury collisions was 7 times greater than minor injury collisions. There were several differences in road, environmental, and human factors, and injury patterns between cyclist-motorised vehicle collisions and non-motorised vehicle collisions. The findings of this study indicate that greater attention should be paid to the following underreported collision types: 1) those that do not involve collisions with motorised vehicles (single cyclist collisions in particular), which have been shown to have differing collision characteristics to motorised vehicle collisions, and 2) less severe injuries, which have been shown to be a substantial contributor to the cyclist safety problem. Furthermore, surveys have been shown to be a valuable mechanism for investigation of lower severity cyclist injuries, which are largely unrecorded in Police or hospital data.

Force experienced by the head during heading is influenced more by speed than the mechanical properties of the football.

There are growing concerns about the risk of neurodegenerative diseases associated with heading in football. It is essential to understand the biomechanics of football heading to guide player protection strategies to reduce the severity of the impact. The aim of this study was to assess the effect of football speed, mass, and stiffness on the forces experienced during football heading using mathematical and human body computational model simulations. Previous research indicates that a football header can be modeled as a lumped mass mathematical model with elastic contact. Football headers were then reconstructed using a human body modeling approach. Simulations were run by independently varying the football mass, speed, and stiffness. Peak contact force experienced by the head was extracted from each simulation. The mathematical and human body computational model simulations indicate that the force experienced by the head was directly proportional to the speed of the ball and directly proportional to the square root of the ball stiffness and mass. Over the practical range of ball speed, mass, and stiffness, the force experienced by the head during football heading is mainly influenced by the speed of the ball rather than its mass or stiffness. The findings suggest that it would be more beneficial to develop player protection strategies that aim to reduce the speed at which the ball is traveling when headed by a player. Law changes reducing high ball speeds could be trialed at certain age grades or as a phased introduction to football heading.

The predictive capacity of the MADYMO ellipsoid pedestrian model for pedestrian ground contact kinematics and injury evaluation.

Pedestrian injuries occur in both the primary vehicle contact and the subsequent ground contact. Currently, no ground contact countermeasures have been implemented and no pedestrian model has been validated for ground contact, though this is needed for developing future ground contact injury countermeasures. In this paper, we assess the predictive capacity of the MADYMO ellipsoid pedestrian model in reconstructing six recent pedestrian cadaver ground contact experiments. Whole-body kinematics as well as vehicle and ground contact related aHIC (approximate HIC) and BrIC scores were evaluated. Reasonable results were generally achieved for the timings of the principal collision events, and for the overall ground contact mechanisms. However, the resulting head injury predictions based on the ground contact HIC and BrIC scores showed limited capacity of the model to replicate individual experiments. Sensitivity studies showed substantial influences of the vehicle-pedestrian contact characteristic and certain initial pedestrian joint angles on the subsequent ground contact kinematics and injury predictions. Further work is needed to improve the predictive capacity of the MADYMO pedestrian model for ground contact injury predictions.

Cycling related major trauma in Ireland.

INTRODUCTION: Cycling as a means of transport or recreational activity is increasing in popularity in Ireland. However, increasing numbers of cyclists may lead to an increased number of bicycle collisions and fatalities. The Road Safety Authority is the statutory body for road safety in Ireland but uses police data alone to collate cycling collision statistics. This may lead to an underestimation of cycling injuries in Ireland. Using hospital statistics may provide a greater understanding of cycling trauma in Ireland. OBJECTIVE: The present study examines cycling related trauma in Ireland using the Major Trauma Audit (MTA) data collected via the Trauma and Research Network (TARN) from hospitals in Ireland for the period 2014 to 2016. The database was interrogated for demographics, mechanism of injury, injury characteristics and patient outcomes. RESULTS: There were 410 cycling collisions recorded in the TARN database which represented 4.4% of trauma captured by TARN for the study period. Of this cohort 79% were male compared with 58% in the overall (TARN) trauma cohort (p < 0.001) and the median (IQR) age was 43.8 years (31.0, 55.7) which is younger than the median (IQR) of 58.9 (36.2, 76.0) years for the overall trauma cohort (p < 0.001). Cycling collisions had a median (IQR) injury severity score (ISS) of 10 (9, 20) which was higher than the overall trauma cohort ISS of 9 (9, 17). Of the mechanisms observed for cycling trauma, 31.7% (n = 130) had a collision with a motor vehicle. Of those who did not wear a helmet, 52.2% (n = 47) sustained a head injury compared with 27.5% (n = 44) in the group who were wearing a helmet (p < 0.001). CONCLUSION: The TARN data presented in this paper builds a more complete overview of the burden of cycling collisions in Ireland. Particular points of focus are that serious cycling injuries occur in a predominantly male population, and that only around 30% of cases are recorded as involving a motor vehicle, with the majority having an unknown mechanism of injury. There was an association between helmets and head injuries in this study, but there are likely other contributing factors such as mechanism of injury, velocity or cycling infrastructure. Using hospital data such as the MTA provides valuable information on the injuries sustained by cyclists, but more prospective studies to capture injury mechanism and contributing factors are needed.

An inverse model of the mechanical response of passive skeletal muscle: Implications for microstructure.

The constitutive response of passive skeletal muscle is important for many human body modelling applications, but modelling the tension-compression asymmetry and the anisotropy observed in ex-vivo samples is challenging. Existing microstructural models do not capture the full three-dimensional response while models suitable for application in finite element environments mostly have a limited microstructural basis and cannot capture the observed Poisson's ratios. The aim of this paper is to derive an inverse model based on the microstructure of a skeletal muscle that can predict its passive mechanical response. The model parameters and predictions were derived and assessed by comparison with published experimental stress-strain response and Poisson's ratio data. Results show a close match for both predicted stress-strain response for fibre and cross-fibre direction deformations and similar Poisson's ratio values. Some microstructural observations which strengthen our understanding of the role of the collagen network and intramuscular pressure are also provided.

Potential benefits of controlled vehicle braking to reduce pedestrian ground contact injuries.

Protecting struck pedestrians during the ground contact phase has been a challenge for decades. Recent studies have shown how ground related injury is influenced by pedestrian kinematics. In this paper we further developed this approach by assessing the potential of controlling vehicle braking to reduce pedestrian ground contact injuries. Applying a recently proposed Simulation Test Sample, a series of simulations were run using the MADYMO software environment. The approach considered 6 vehicle shapes, 4 pedestrian models, 3 impact velocities and 2 pedestrian gaits and each case was considered with two different vehicle braking approaches. The first was full braking, while the second applied controlled braking, for which a strategy based on pedestrian kinematics was applied. The effect of vehicle braking was evaluated using the Weighted Injury Cost (WIC) of overall pedestrian injuries and the pedestrian-ground impact velocity change. The proximity of the vehicle and pedestrian at the instant of ground contact was also evaluated to assess the potential of future vehicle based intervention methods to cushion the ground contact. Finally real-world videos of pedestrian collisions were analyzed to estimate the available free vehicle stopping distances. Results showed substantial median reductions in WIC and head impact velocity for all vehicle shapes except the Van. The proximity of the pedestrian to the vehicle front at the instant of ground contact under controlled braking is less than 1.5 m in most cases, and the required stopping distance for the vehicle under controlled braking was within the available stopping distance estimated from the video footage in about 74% of cases. It is concluded that controlled braking has significant potential to reduce the overall burden of pedestrian ground contact injuries, but future efforts are required to establish an optimized braking strategy as well as a means to handle those cases where controlled braking is not beneficial or even harmful.