Construction of three-dimensional, homogeneous regenerative cartilage tissue based on the ECG-DBM complex.

Introduction: The feasibility of using a steel decalcified bone matrix (DBM)-reinforced concrete engineered cartilage gel (ECG) model concept for in vivo cartilage regeneration has been demonstrated in preliminary experiments. However, the regenerated cartilage tissue contained an immature part in the center. The present study aimed to achieve more homogeneous regenerated cartilage based on the same model concept. Methods: For this, we optimized the culture conditions for the engineered cartilage gel-decalcified bone matrix (ECG-DBM) complex based on the previous model and systematically compared the in vitro chondrogenic abilities of ECG in the cartilage slice and ECG-DBM complex states. We then compared the in vivo cartilage regeneration effects of the ECG-DBM complex with those of an equivalent volume of ECG and an equivalent ECG content. Results and discussion: Significant increases in the DNA content and cartilage-specific matrix content were observed for the ECG-DBM complex compared with the ECG cartilage slice, suggesting that the DBM scaffold significantly improved the quality of ECG-derived cartilage regeneration in vitro. In the in vivo experiments, high-quality cartilage tissue was regenerated in all groups at 8 weeks, and the regenerated cartilage exhibited typical cartilage lacunae and cartilage-specific extracellular matrix deposition. Quantitative analysis revealed a higher chondrogenic efficiency in the ECG-DBM group. Specifically, the ECG-DBM complex achieved more homogeneous and stable regenerated cartilage than an equivalent volume of ECG and more mature regenerated cartilage than an equivalent ECG content. Compared with ECG overall, ECG-DBM had a more controllable shape, good morphology retention, moderate mechanical strength, and high cartilage regeneration efficiency. Further evaluation of the ECG-DBM complex after in vitro culture for 7 and 14 days confirmed that an extended in vitro preculture facilitated more homogeneous cartilage regeneration.

Cartilage Regeneration Units Based on Hydrogel Microcarriers for Injectable Cartilage Regeneration in an Autologous Goat Model.

Despite numerous studies on tissue-engineered injectable cartilage, it is still difficult to realize stable cartilage formation in preclinical large animal models because of suboptimal biocompatibility, which hinders further application in clinical settings. In this study, we proposed a novel concept of cartilage regeneration units (CRUs) based on hydrogel microcarriers for injectable cartilage regeneration in goats. To achieve this goal, hyaluronic acid (HA) was chosen as the microparticle to integrate gelatin (GT) chemical modification and a freeze-drying technology to create biocompatible and biodegradable HA-GT microcarriers with suitable mechanical strength, uniform particle size, a high swelling ratio, and cell adhesive ability. CRUs were then prepared by seeding goat autologous chondrocytes on the HA-GT microcarriers and culturing in vitro. Compared with traditional injectable cartilage methods, the proposed method forms relatively mature cartilage microtissue in vitro and improves the utilization rate of the culture space to facilitate nutrient exchange, which is necessary for mature and stable cartilage regeneration. Finally, these precultured CRUs were used to successfully regenerate mature cartilage in nude mice and in the nasal dorsum of autologous goats for cartilage filling. This study provides support for the future clinical application of injectable cartilage.

Regeneration of Mechanically Enhanced Tissue-Engineered Cartilage Based on the Decalcified Bone Matrix Framework.

Human decalcified bone matrix (HDBM) is a framework with a porous structure and good biocompatibility. Nevertheless, its oversized pores lead to massive cell loss when seeding chondrocytes directly over it. Gelatin (GT) is a type of protein obtained by partial hydrolysis of collagen. The GT scaffold can be prepared from the GT solution through freeze-drying. More importantly, the pore size of the GT scaffold can be controlled by optimizing the concentration of the GT solution. Similarly, when different concentrations of gelatin are combined with HDBM and then freeze-dried, the pore size of the HDBM can be modified to different degrees. In this study, the HDBM framework was modified with 0.3, 0.6, and 0.9%GT, resulting in an improved pore size and adhesion rate. Results showed that the HDBM framework with 0.6%GT (HDBM-0.6%GT) had an average pore size of 200 µm, which was more suitable for chondrocyte seeding. Additionally, our study validated that porcine decalcified bone matrix (PDBM) had a proper pore structure. Chondrocytes were in vitro seeded on the three frameworks for 4 weeks and then implanted in nude mice and autologous goats, respectively. The in vivo cartilage regeneration results showed that HDBM-0.6%GT and PDBM frameworks compensated for the oversized pores of the HDBM framework. Moreover, they showed successfully regenerated more mature cartilage tissue with a certain shape in animals.

A comparative study on various cell sources for constructing tissue-engineered meniscus.

Injury to the meniscus is a common occurrence in the knee joint and its management remains a significant challenge in the clinic. Appropriate cell source is essential to cell-based tissue regeneration and cell therapy. Herein, three commonly used cell sources, namely, bone marrow mesenchymal stem cell (BMSC), adipose-derived stem cell (ADSC), and articular chondrocyte, were comparatively evaluated to determine their potential for engineered meniscus tissue in the absence of growth factor stimulus. Cells were seeded on electrospun nanofiber yarn scaffolds that share similar aligned fibrous configurations with native meniscus tissue for constructing meniscus tissue in vitro. Our results show that cells proliferated robustly along nanofiber yarns to form organized cell-scaffold constructs, which recapitulate the typical circumferential fiber bundles of native meniscus. Chondrocytes exhibited different proliferative characteristics and formed engineered tissues with distinct biochemical and biomechanical properties compared to BMSC and ADSC. Chondrocytes maintained good chondrogenesis gene expression profiles and produced significantly increased chondrogenic matrix and form mature cartilage-like tissue as revealed by typical cartilage lacunae. In contrast, stem cells underwent predominately fibroblastic differentiation and generated greater collagen, which contributes to improved tensile strengths of cell-scaffold constructs in comparison to the chondrocyte. ADSC showed greater proliferative activity and increased collagen production than BMSC. These findings indicate that chondrocytes are superior to stem cells for constructing chondrogenic tissues while the latter is feasible to form fibroblastic tissue. Combination of chondrocytes and stem cells might be a possible solution to construct fibrocartilage tissue and meniscus repair and regeneration.

Injectable nanofiber microspheres modified with metal phenolic networks for effective osteoarthritis treatment.

Osteoarthritis (OA) is one of the most common chronic musculoskeletal diseases, which accounts for a large proportion of physical disabilities worldwide. Herein, we fabricated injectable gelatin/poly(L-lactide)-based nanofibrous microspheres (MS) via electrospraying technology, which were further modified with tannic acid (TA) named as TMS or metal phenolic networks (MPNs) consisting of TA and strontium ions (Sr2+) and named as TSMS to enhance their bioactivity for OA therapy. The TA-modified microspheres exhibited stable porous structure and anti-oxidative activity. Notably, TSMS showed a sustained release of TA as compared to TMS, which exhibited a burst release of TA. While all types of microspheres exhibited good cytocompatibility, TSMS displayed good anti-inflammatory properties with higher cell viability and cartilage-related extracellular matrix (ECM) secretion. The TSMS microspheres also showed less apoptosis of chondrocytes in the hydrogen peroxide (H2O2)-induced inflammatory environment. The TSMS also inhibited the degradation of cartilage along with the considerable repair outcome in the papain-induced OA rabbit model in vivo as well as suppressed the expression level of inflammatory cytokines, such as tumor necrosis factor-alpha (TNF-α) and interleukin-1-beta (IL-1ß). Taken together, TSMS may provide a highly desirable therapeutic option for intra-articular treatment of OA. STATEMENT OF SIGNIFICANCE: Osteoarthritis (OA) is a chronic disease, which is caused by the inflammation of joint. Current treatments for OA achieve pain relief but hardly prevent or slow down the disease progression. Microspheres are at the forefront of drug delivery and tissue engineering applications, which can also be minimal-invasively injected into the joint. Polyphenols and therapeutic ions have been shown to be beneficial for the treatment of diseases related to the joints, including OA. Herein, we prepared gelatin/poly(L-lactide)-based nanofibrous microspheres (MS) via electrospinning incorporated electrospraying technology and functionalized them with the metal phenolic networks (MPNs) consisting of TA and strontium ions (Sr2+), and assessed their potential for OA therapy both in vitro and in vivo.

Mechanism of Progesterone in Treatment of Traumatic Brain Injury Based on Network Pharmacology and Molecular Docking Technology.

BACKGROUND Previous studies have confirmed that progesterone has a protective effect on traumatic brain injury (TBI). In this paper, network pharmacology and molecular docking technology were used to further explore the potential mechanism of progesterone in the treatment of TBI. MATERIAL AND METHODS Based on network pharmacology, potential targets of progesterone for TBI were obtained. The network diagram of interactions between target proteins was established to screen the key targets of progesterone for TBI. The DAVID database was used to analyze its biological function and enrichment pathway, and to explore and determine the biological pathway of progesterone in treating TBI. Molecular docking technology was used to simulate the interaction between progesterone and key target proteins. RESULTS Progesterone can treat TBI by anti-inflammatory action, repairing damaged cell membranes, stabilizing the structure of the blood-brain barrier, alleviating brain edema, reducing neuronal apoptosis, and improving neurological function. The molecular mechanism involves the PI3K/Akt signaling pathway, MAPK signaling pathway, and Ras signaling pathway. CONCLUSIONS Progesterone is a potential clinical treatment for TBI. Exploring the potential targets and pathways of TBI therapy through network pharmacology can provide a direction for subsequent research.

Chondroitin sulfate cross-linked three-dimensional tailored electrospun scaffolds for cartilage regeneration.

Degenerated cartilage tissues remain a burgeoning issue to be tackled, while bioactive engineering products available for optimal cartilage regeneration are scarce. In the present study, two-dimensional (2DS) poly(l-lactide-co-ε-caprolactone)/silk fibroin (PLCL/SF)-based scaffolds were fabricated by conjugate electrospinning method, which were then cross-linked with chondroitin sulfate (CS) to further enhance their mechanical and biological performance. Afterwards, three-dimensional (3D) PLCL/SF scaffolds (3DS) and CS-crosslinked 3D scaffolds (3DCSS) with tailored size were successfully fabricated by an in-situ gas foaming in a confined mold followed by freeze-dried. Gas-foamed scaffolds displayed high porosity, rapid water uptake, and stable mechanical properties. While all of the scaffolds exhibited good cytocompatibility in vitro; 3DCSS showed better cell seeding efficiency and chondro-protective effect compared to other scaffolds. Besides, 3DCSS scaffolds supported the formation of more mature cartilage-like tissues along with the best repair outcome in a rabbit articular cartilage defect model in vivo, as well as less expression level of pro-inflammatory cytokines, including interleukin (IL)-1ß and tumor necrosis factor (TNF)-α than that of the other groups. Taken together, 3DCSS may provide an alternative therapeutic option for cartilage tissue repair.

An Injectable Platform of Engineered Cartilage Gel and Gelatin Methacrylate to Promote Cartilage Regeneration.

Cell-hydrogel constructs are frequently used as injectable platforms for irregular cartilage regeneration. However, cell-hydrogel constructs have obvious disadvantages, such as long culture times, high probability of infection, and poor cartilage formation capacity, significantly limiting their clinical translation. In this study, we aimed to develop a novel injectable platform comprising engineered cartilage gel (ECG) and gelatin methacrylate (GelMA) to improve cartilage regeneration. We first prepared an ECG by cutting the in vitro engineered cartilage sheet into pieces. The chondrocytes and ECG were evenly encapsulated into GelMA to form Cell-GelMA and ECG-GelMA constructs. The ECG-GelMA construct exhibited preferred gel characteristics and superior biocompatibility compared with the Cell-GelMA construct counterpart. After subcutaneous implantation in nude mice and goat, both gross views and histological evaluations showed that the ECG-GelMA construct achieved more homogenous, stable, and mature cartilage regeneration than the Cell-GelMA construct. Immunological evaluations showed that ECG-GelMA had a mitigatory immunologic reaction than the Cell-GelMA construct. Overall, the results suggest that the ECG-GelMA is a promising injectable platform for cartilage regeneration that may advance clinical translation.