ABSTRACT
Coffee production workers are exposed to complex mixtures of gases, dust, and vapors, including the known respiratory toxins, diacetyl, and 2,3-pentanedione, which occur naturally during coffee roasting and are also present in flavorings used to flavor coffee. This study evaluated the associations of these two α-diketones with lung function measures in coffee production workers. Workers completed questionnaires, and their lung function was assessed by spirometry and impulse oscillometry (IOS). Personal exposures to diacetyl, 2,3-pentanedione, and their sum (SumDA+PD) were assigned to participants, and metrics of the highest 95th percentile (P95), cumulative, and average exposure were calculated. Linear and logistic regression models for continuous and binary/polytomous outcomes, respectively, were used to explore exposure-response relationships adjusting for age, body mass index, tenure, height, sex, smoking status, race, or allergic status. Decrements in percent predicted forced expiratory volume in 1 second (ppFEV1) and forced vital capacity (ppFVC) were associated with the highest-P95 exposures to 2,3-pentanedione and SumDA+PD. Among flavoring workers, larger decrements in ppFEV1 and ppFVC were associated with highest-P95 exposures to diacetyl, 2,3-pentanedione, and SumDA+PD. Abnormal FEV1, FVC, and restrictive spirometric patterns were associated with the highest-P95, cumulative, and average exposures for all α-diketone metrics; some of these associations were also present among flavoring and non-flavoring workers. The combined category of small and peripheral airways plus small and large airways abnormalities on IOS had elevated odds for highest-P95 exposure to α-diketones. These results may be affected by the small sample size, few cases of abnormal spirometry, and the healthy worker effect. Associations between lung function abnormalities and exposure to α-diketones suggest it may be prudent to consider exposure controls in both flavoring and non-flavoring settings.
Subject(s)
Diacetyl , Occupational Exposure , Flavoring Agents , Humans , Lung , PentanonesABSTRACT
Exposure to elevated levels of diacetyl in flavoring and microwave popcorn production has been associated with respiratory impairment among workers including from a severe lung disease known as obliterative bronchiolitis. Laboratory studies demonstrate damage to the respiratory tract in rodents exposed to either diacetyl or the related alpha-diketone 2,3-pentanedione. Respiratory tract damage includes the development of obliterative bronchiolitis-like changes in the lungs of rats repeatedly inhaling either diacetyl or 2,3-pentanedione. In one flavored coffee processing facility, current workers who spent time in higher diacetyl and 2,3-pentanedione areas had lower lung function values, while five former flavoring room workers were diagnosed with obliterative bronchiolitis. In that and other coffee roasting and packaging facilities, grinding roasted coffee beans has been identified as contributing to elevated levels of diacetyl and 2,3-pentanedione. To reduce worker exposures, employers can take various actions to control exposures according to the hierarchy of controls. Because elimination or substitution is not applicable to coffee production facilities not using flavorings, use of engineering controls to control exposures at their source is especially important. This work demonstrates the use of temporary ventilated enclosures around grinding equipment in a single coffee roasting and packaging facility to mitigate diacetyl and 2,3-pentanedione emissions from grinding equipment to the main production space. Concentrations of diacetyl and 2,3-pentanedione were measured in various locations throughout the main production space as well as inside and outside of ventilated enclosures to evaluate the effect of the enclosures on exposures. Diacetyl and 2,3-pentanedione concentrations outside one grinder enclosure decreased by 95 and 92%, respectively, despite ground coffee production increasing by 12%, after the enclosure was installed. Outside a second enclosure, diacetyl and 2,3-pentanedione concentrations both decreased 84%, greater than the 33% decrease in ground coffee production after installation. Temporary ventilated enclosures used as engineering control measures in this study effectively reduced emissions of diacetyl and 2,3-pentanedione at the source in this facility. These findings motivated management to explore options with a grinding equipment manufacturer to permanently ventilate their grinders to reduce emissions of diacetyl and 2,3-pentanedione.
Subject(s)
Bronchiolitis , Occupational Exposure , Animals , Coffee , Diacetyl/analysis , Flavoring Agents/analysis , Occupational Exposure/analysis , Occupational Exposure/prevention & control , Pentanones , RatsABSTRACT
OBJECTIVES: To determine whether engineering controls and respiratory protection had measurable short-term impact on indium exposure and respiratory health among current indium-tin oxide production and reclamation facility workers. METHODS: We documented engineering controls implemented following our 2012 evaluation and recorded respirator use in 2012 and 2014. We measured respirable indium (Inresp) and plasma indium (InP) in 2012 and 2014, and calculated change in Inresp (∆Inresp) and InP (∆InP) by the 13 departments. We assessed symptoms, lung function, serum biomarkers of interstitial lung disease (Krebs von den Lungen (KL)-6 and surfactant protein (SP)-D) and chest high-resolution CT at both time points and evaluated workers who participated in both 2012 and 2014 for changes in health outcomes (new, worsened or improved). RESULTS: Engineering controls included installation of local exhaust ventilation in both grinding departments (Rotary and Planar) and isolation of the Reclaim department. Respiratory protection increased in most (77%) departments. ∆InP and ∆Inresp often changed in parallel by department. Among 62 workers participating in both 2012 and 2014, 18 (29%) had new or worsening chest symptoms and 2 (3%) had functional decline in lung function or radiographic progression, but average KL-6 and SP-D concentrations decreased, and no cases of clinical indium lung disease were recognised. CONCLUSIONS: Increased engineering controls and respiratory protection can lead to decreased Inresp, InP and biomarkers of interstitial lung disease among workers in 2 years. Ongoing medical monitoring of indium-exposed workers to confirm the longer-term effectiveness of preventive measures is warranted.
Subject(s)
Lung Diseases, Interstitial , Occupational Exposure , Biomarkers , Follow-Up Studies , Humans , Indium/adverse effects , Lung Diseases, Interstitial/chemically induced , Occupational Exposure/adverse effects , Occupational Exposure/analysis , Pulmonary Surfactant-Associated Protein D , Tin CompoundsABSTRACT
Rationale: Workers' exposure to metalworking fluid (MWF) has been associated with respiratory disease.Objectives: As part of a public health investigation of a manufacturing facility, we performed a cross-sectional study using paired environmental and human sampling to evaluate the cross-pollination of microbes between the environment and the host and possible effects on lung pathology present among workers.Methods: Workplace environmental microbiota were evaluated in air and MWF samples. Human microbiota were evaluated in lung tissue samples from workers with respiratory symptoms found to have lymphocytic bronchiolitis and alveolar ductitis with B-cell follicles and emphysema, in lung tissue samples from control subjects, and in skin, nasal, and oral samples from 302 workers from different areas of the facility. In vitro effects of MWF exposure on murine B cells were assessed.Measurements and Main Results: An increased similarity of microbial composition was found between MWF samples and lung tissue samples of case workers compared with control subjects. Among workers in different locations within the facility, those that worked in the machine shop area had skin, nasal, and oral microbiota more closely related to the microbiota present in the MWF samples. Lung samples from four index cases and skin and nasal samples from workers in the machine shop area were enriched with Pseudomonas, the dominant taxa in MWF. Exposure to used MWF stimulated murine B-cell proliferation in vitro, a hallmark cell subtype found in the pathology of index cases.Conclusions: Evaluation of a manufacturing facility with a cluster of workers with respiratory disease supports cross-pollination of microbes from MWF to humans and suggests the potential for exposure to these microbes to be a health hazard.
Subject(s)
Aerosols/adverse effects , Air Pollutants, Occupational/adverse effects , Manufacturing and Industrial Facilities , Microbiota , Pseudomonas pseudoalcaligenes , Respiration Disorders/physiopathology , Adult , Air Microbiology , Cross-Sectional Studies , Female , Humans , Male , Middle Aged , Respiration Disorders/etiology , United StatesABSTRACT
BACKGROUND: Asthma-related health outcomes are known to be associated with indoor moisture and renovations. The objective of this study was to estimate the frequency of these indoor environmental quality (IEQ) factors in healthcare facilities and their association with asthma-related outcomes among workers. METHODS: New York City healthcare workers (n = 2030) were surveyed regarding asthma-related symptoms, and moisture and renovation factors at work and at home during the last 12 months. Questions for workplace moisture addressed water damage (WD), mold growth (MG), and mold odor (MO), while for renovations they addressed painting (P), floor renovations (FR), and wall renovations (WR). Regression models were fit to examine associations between work and home IEQ factors and multiple asthma-related outcomes. RESULTS: Reports of any moisture (n = 728, 36%) and renovations (n = 1412, 70%) at work were common. Workplace risk factors for asthma-related outcomes included the moisture categories of WD by itself, WD with MO (without MG), and WD with MG and MO, and the renovation category with the three factors P, FR, and WR. Reports of home IEQ factors were less frequent and less likely to be associated with health outcomes. Data analyses suggested that MG and/or MO at work and at home had a synergistic effect on the additive scale with a symptom-based algorithm for bronchial hyperresponsiveness. CONCLUSIONS: The current study determined that moisture and renovation factors are common in healthcare facilities, potentially putting workers at risk for asthma-related outcomes. More research is needed to confirm these results, especially prospective studies.
Subject(s)
Air Pollution, Indoor/analysis , Asthma, Occupational/etiology , Health Personnel/statistics & numerical data , Occupational Exposure/analysis , Workplace/statistics & numerical data , Adult , Air Pollution, Indoor/adverse effects , Female , Hospital Design and Construction/statistics & numerical data , Humans , Humidity/adverse effects , Male , Middle Aged , New York City , Occupational Exposure/adverse effects , Regression Analysis , Risk FactorsABSTRACT
OBJECTIVES: Four machine manufacturing facility workers had a novel occupational lung disease of uncertain aetiology characterised by lymphocytic bronchiolitis, alveolar ductitis and emphysema (BADE). We aimed to evaluate current workers' respiratory health in relation to job category and relative exposure to endotoxin, which is aerosolised from in-use metalworking fluid. METHODS: We offered a questionnaire and spirometry at baseline and 3.5 year follow-up. Endotoxin exposures were quantified for 16 production and non-production job groups. Forced expiratory volume in one second (FEV1) decline ≥10% was considered excessive. We examined SMRs compared with US adults, adjusted prevalence ratios (aPRs) for health outcomes by endotoxin exposure tertiles and predictors of excessive FEV1 decline. RESULTS: Among 388 (89%) baseline participants, SMRs were elevated for wheeze (2.5 (95% CI 2.1 to 3.0)), but not obstruction (0.5 (95% CI 0.3 to 1.1)). Mean endotoxin exposures (range: 0.09-28.4 EU/m3) were highest for machine shop jobs. Higher exposure was associated with exertional dyspnea (aPR=2.8 (95% CI 1.4 to 5.7)), but not lung function. Of 250 (64%) follow-up participants, 11 (4%) had excessive FEV1 decline (range: 403-2074 mL); 10 worked in production. Wheeze (aPR=3.6 (95% CI 1.1 to 12.1)) and medium (1.3-7.5 EU/m3) endotoxin exposure (aPR=10.5 (95% CI 1.3 to 83.1)) at baseline were associated with excessive decline. One production worker with excessive decline had BADE on subsequent lung biopsy. CONCLUSIONS: Lung function loss and BADE were associated with production work. Relationships with relative endotoxin exposure indicate work-related adverse respiratory health outcomes beyond the sentinel disease cluster, including an incident BADE case. Until causative factors and effective preventive strategies for BADE are determined, exposure minimisation and medical surveillance of affected workforces are recommended.
Subject(s)
Air Pollutants, Occupational/adverse effects , Bronchiolitis/epidemiology , Emphysema/epidemiology , Endotoxins/adverse effects , Occupational Diseases/epidemiology , Occupational Exposure/adverse effects , Adult , Aged , Air Pollutants, Occupational/analysis , Bronchiolitis/chemically induced , Emphysema/chemically induced , Endotoxins/analysis , Female , Forced Expiratory Volume , Humans , Male , Manufacturing and Industrial Facilities , Middle Aged , National Institute for Occupational Safety and Health, U.S. , Occupational Diseases/chemically induced , Occupational Exposure/analysis , Pulmonary Alveoli/pathology , Surveys and Questionnaires , United StatesABSTRACT
OBJECTIVES: Peak beryllium inhalation exposures and exposure to the skin may be relevant for developing beryllium sensitization (BeS). The objective of this study was to identify risk factors associated with BeS to inform the prevention of sensitization, and the development of chronic beryllium disease (CBD). METHODS: In a survey of short-term workers employed at a primary beryllium manufacturing facility between the years 1994-1999, 264 participants completed a questionnaire and were tested for BeS. A range of qualitative and quantitative peak inhalation metrics and skin exposure indices were created using: personal full-shift beryllium exposure measurements, 15 min to 24 h process-specific task and area exposure measurements, glove measurements as indicator of skin exposure, process-upset information gleaned from historical reports, and self-reported information on exposure events. Hierarchical clustering was conducted to systematically group participants based on similarity of patterns of 16 exposure variables. The associations of the exposure metrics with BeS and self-reported skin symptoms (in work areas processing beryllium salts as well as in other work areas) were evaluated using correlation analysis, log-binomial and logistic regression models with splines. RESULTS: Metrics of peak inhalation exposure, indices of skin exposure, and using material containing beryllium salts were significantly associated with skin symptoms and BeS; skin symptoms were a strong predictor of BeS. However, in this cohort, we could not tease apart the independent effects of skin exposure from inhalation exposure, as these exposures occurred simultaneously and were highly correlated. Hierarchical clustering identified groups of participants with unique patterns of exposure characteristics resulting in different prevalence of BeS and skin symptoms. A cluster with high skin exposure index and use of material containing beryllium salts had the highest prevalence of BeS and self-reported skin symptoms, followed by a cluster with high inhalation and skin exposure index and a very small fraction of jobs in which beryllium salts were used. A cluster with low inhalation and skin exposure and no workers using beryllium salts had no cases of BeS. CONCLUSION: Multiple pathways and types of exposure were associated with BeS and may be important for informing BeS prevention. Prevention efforts should focus on controlling airborne beryllium exposures with attention to peaks, use of process characteristics (e.g. the likelihood of upset conditions to design interventions) minimize skin exposure to beryllium particles, and in particular, eliminate skin contact with beryllium salts to interrupt potential exposure pathways for BeS risk.
Subject(s)
Air Pollutants, Occupational/analysis , Berylliosis/epidemiology , Beryllium/analysis , Inhalation Exposure/analysis , Occupational Exposure/analysis , Adult , Benchmarking , Berylliosis/prevention & control , Beryllium/adverse effects , Cross-Sectional Studies , Female , Gloves, Protective , Humans , Inhalation Exposure/adverse effects , Male , Manufacturing and Industrial Facilities , Middle Aged , Prevalence , Regression Analysis , Risk Factors , Skin/chemistry , Young AdultABSTRACT
BACKGROUND: A cluster of severe lung disease occurred at a manufacturing facility making industrial machines. We aimed to describe disease features and workplace exposures. METHODS: Clinical, functional, radiologic, and histopathologic features were characterized. Airborne concentrations of thoracic aerosol, metalworking fluid, endotoxin, metals, and volatile organic compounds were measured. Facility airflow was assessed using tracer gas. Process fluids were examined using culture, polymerase chain reaction, and 16S ribosomal RNA sequencing. RESULTS: Five previously healthy male never-smokers, ages 27 to 50, developed chest symptoms from 1995 to 2012 while working in the facility's production areas. Patients had an insidious onset of cough, wheeze, and exertional dyspnea; airflow obstruction (mean FEV1 = 44% predicted) and reduced diffusing capacity (mean = 53% predicted); and radiologic centrilobular emphysema. Lung tissue demonstrated a unique pattern of bronchiolitis and alveolar ductitis with B-cell follicles lacking germinal centers, and significant emphysema for never-smokers. All had chronic dyspnea, three had a progressive functional decline, and one underwent lung transplantation. Patients reported no unusual nonoccupational exposures. No cases were identified among nonproduction workers or in the community. Endotoxin concentrations were elevated in two air samples; otherwise, exposures were below occupational limits. Air flowed from areas where machining occurred to other production areas. Metalworking fluid primarily grew Pseudomonas pseudoalcaligenes and lacked mycobacterial DNA, but 16S analysis revealed more complex bacterial communities. CONCLUSION: This cluster indicates a previously unrecognized occupational lung disease of yet uncertain etiology that should be considered in manufacturing workers (particularly never-smokers) with airflow obstruction and centrilobular emphysema. Investigation of additional cases in other settings could clarify the cause and guide prevention.
Subject(s)
Bronchiolitis/etiology , Lung/pathology , Manufacturing Industry , Occupational Diseases/etiology , Occupational Exposure/adverse effects , Pulmonary Emphysema/etiology , Adult , Air Pollutants, Occupational/adverse effects , Air Pollutants, Occupational/analysis , Endotoxins/analysis , Humans , Male , Manufacturing and Industrial Facilities , Middle Aged , Occupational Exposure/analysis , Pulmonary Alveoli/pathology , Young AdultABSTRACT
Cleaning and disinfecting tasks and product use are associated with elevated prevalence of asthma and respiratory symptoms among healthcare workers; however, the levels of exposure that pose a health risk remain unclear. The objective of this study was to estimate the peak, average, and determinants of real-time total volatile organic compound (TVOC) exposure associated with cleaning tasks and product-use. TVOC exposures were measured using monitors equipped with a photoionization detector (PID). A simple correction factor was applied to the real-time measurements, calculated as a ratio of the full-shift average TVOC concentrations from a time-integrated canister and the PID sample, for each sample pair. During sampling, auxiliary information, e.g. tasks, products used, engineering controls, was recorded on standardized data collection forms at 5-min intervals. Five-minute averaged air measurements (n = 10 276) from 129 time-series comprising 92 workers and four hospitals were used to model the determinants of exposures. The statistical model simultaneously accounted for censored data and non-stationary autocorrelation and was fit using Markov-Chain Monte Carlo within a Bayesian context. Log-transformed corrected concentrations (cTVOC) were modeled, with the fixed-effects of tasks and covariates, that were systematically gathered during sampling, and random effect of person-day. The model-predicted geometric mean (GM) cTVOC concentrations ranged from 387 parts per billion (ppb) for the task of using a product containing formaldehyde in laboratories to 2091 ppb for the task of using skin wipes containing quaternary ammonium compounds, with a GM of 925 ppb when no products were used. Peak exposures quantified as the 95th percentile of 15-min averages for these tasks ranged from 3172 to 17 360 ppb. Peak and GM task exposures varied by occupation and hospital unit. In the multiple regression model, use of sprays was associated with increasing exposures, while presence of local exhaust ventilation, large room volume, and automatic sterilizer use were associated with decreasing exposures. A detailed understanding of factors affecting TVOC exposure can inform targeted interventions to reduce exposures and can be used in epidemiologic studies as metrics of short-duration peak exposures.
Subject(s)
Disinfectants/analysis , Hospitals/statistics & numerical data , Occupational Exposure/analysis , Volatile Organic Compounds/analysis , Bayes Theorem , Detergents/analysis , Humans , Markov Chains , Solvents/analysis , United StatesABSTRACT
Asthma is a heterogeneous disease with varying severity and subtypes. Recent reviews of epidemiologic studies have identified cleaning and disinfecting activities (CDAs) as important risk factors for asthma-related outcomes among healthcare workers. However, the complexity of CDAs in healthcare settings has rarely been examined. This study utilized a complex survey dataset and data reduction approaches to identify and group healthcare workers with similar patterns of asthma symptoms, and then explored their associations with groups of participants with similar patterns of CDAs. Self-reported information on asthma symptoms/care, CDAs, demographics, smoking status, allergic status, and other characteristics were collected from 2030 healthcare workers within nine selected occupations in New York City. Hierarchical clustering was conducted to systematically group participants based on similarity of patterns of the 27 asthma symptom/care variables, and 14 product applications during CDAs, separately. Word clouds were used to visualize the complex information on the resulting clusters. The associations of asthma health clusters (HCs) with exposure clusters (ECs) were evaluated using multinomial logistic regression. Five HCs were identified (HC-1 to HC-5), labelled based on predominant features as: "no symptoms", "winter cough/phlegm", "mild asthma symptoms", "undiagnosed/untreated asthma", and "asthma attacks/exacerbations". For CDAs, five ECs were identified (EC-1 to EC-5), labelled as: "no products", "housekeeping/chlorine", "patient care", "general cleaning/laboratory", and "disinfection products". Using HC-1 and EC-1 as the reference groups, EC-2 was associated with HC-4 (odds ratio (OR)â¯=â¯3.11, 95% confidence interval (95% CI)â¯=â¯1.46-6.63) and HC-5 (ORâ¯=â¯2.71, 95% CIâ¯=â¯1.25-5.86). EC-3 was associated with HC-5 (ORâ¯=â¯2.34, 95% CIâ¯=â¯1.16-4.72). EC-4 was associated with HC-5 (ORâ¯=â¯2.35, 95% CIâ¯=â¯1.07-5.13). EC-5 was associated with HC-3 (ORâ¯=â¯1.81, 95% CIâ¯=â¯1.09-2.99) and HC-4 (ORâ¯=â¯3.42, 95% CIâ¯=â¯1.24-9.39). Various combinations of product applications like using alcohols, bleach, high-level disinfectants, and enzymes to disinfect instruments and clean surfaces captured by the ECs were identified as risk factors for the different asthma symptoms clusters, indicating that prevention efforts may require targeting multiple products. The associations of HCs with EC can be used to better inform prevention strategies and treatment options to avoid disease progression. This study demonstrated hierarchical clustering and word clouds were useful techniques for analyzing and visualizing a complex dataset with a large number of potentially correlated variables to generate practical information that can inform prevention activities.
Subject(s)
Asthma , Disinfection , Health Personnel , Occupational Exposure/analysis , Cluster Analysis , Detergents/adverse effects , Disinfectants/adverse effects , Female , Humans , Hypersensitivity , Logistic Models , Male , Odds Ratio , Risk FactorsABSTRACT
BACKGROUND: Previous studies have suggested an association of asthma onset and exacerbation with cleaning and disinfecting activities in a number of industries, including healthcare. The objective of the current study was to investigate the association of asthma and related outcomes with occupations and tasks in urban healthcare workers in the United States. METHODS: A questionnaire was implemented in a sample of workers from nine healthcare occupations in New York City. We used regression models to examine the association of post-hire asthma, current asthma, exacerbation of asthma, a symptom algorithm for bronchial hyper-responsiveness (BHR-related symptoms), a symptom-based asthma score, and the symptom wheeze with occupation and four healthcare tasks, while adjusting for other risk factors and potential confounders. RESULTS: A total of 2030 participants completed the questionnaire. The task of cleaning fixed surfaces was significantly associated with most outcome variables, including current asthma (odds ratio (OR)â¯=â¯1.84, 95% confidence interval (CI) 1.26-2.68), moderate exacerbation (ORâ¯=â¯3.10, 95% CI 1.25-7.67), and BHR-related symptoms (ORâ¯=â¯1.38, 95% CI 1.08-1.77). In comparison to nursing assistants, the occupations environmental service workers and registered nurses were at higher risk for current asthma, and licensed practical nurses were at higher risk for moderate exacerbation. Other tasks associated with outcomes were administering aerosolized medications with current asthma and moderate exacerbation, and sterilizing medical equipment with BHR-related symptoms. CONCLUSIONS: These findings add to the growing body of evidence for the association of asthma with cleaning and other activities in healthcare. Further research is especially needed to investigate the association of asthma-related outcomes with exposure metrics based on tasks, products, and chemical exposures in healthcare.
Subject(s)
Asthma/epidemiology , Disinfection , Health Personnel , Occupational Diseases/epidemiology , Occupational Exposure , Adult , Detergents , Disinfectants , Female , Humans , Male , Middle Aged , New York City/epidemiology , Odds Ratio , Respiratory Sounds , Risk Factors , Surveys and QuestionnairesABSTRACT
Objectives: Use of cleaning and disinfecting products is associated with work-related asthma among healthcare workers, but the specific levels and factors that affect exposures remain unclear. The objective of this study was to evaluate the determinants of selected volatile organic compound (VOC) exposures in healthcare settings. Methods: Personal and mobile-area air measurements (n = 143) from 100 healthcare workers at four hospitals were used to model the determinants of ethanol, acetone, 2-propanol, d-limonene, α-pinene, and chloroform exposures. Hierarchical cluster analysis was conducted to partition workers into groups with similar cleaning task/product-use profiles. Linear mixed-effect regression models using log-transformed VOC measurements were applied to evaluate the association of individual VOCs with clusters of task/product use, industrial hygienists' grouping (IH) of tasks, grouping of product application, chemical ingredients of the cleaning products used, amount of product use, and ventilation. Results: Cluster analysis identified eight task/product-use clusters that were distributed across multiple occupations and hospital units, with the exception of clusters consisting of housekeepers and floor strippers/waxers. Results of the mixed-effect models showed significant associations between selected VOC exposures and several clusters, combinations of IH-generated task groups and chemical ingredients, and product application groups. The patient/personal cleaning task using products containing chlorine was associated with elevated levels of personal chloroform and α-pinene exposures. Tasks associated with instrument sterilizing and disinfecting were significantly associated with personal d-limonene and 2-propanol exposures. Surface and floor cleaning and stripping tasks were predominated by housekeepers and floor strippers/waxers, and use of chlorine-, alcohol-, ethanolamine-, and quaternary ammonium compounds-based products was associated with exposures to chloroform, α-pinene, acetone, 2-propanol, or d-limonene. Conclusions: Healthcare workers are exposed to a variety of chemicals that vary with tasks and ingredients of products used during cleaning and disinfecting. The combination of product ingredients with cleaning and disinfecting tasks were associated with specific VOCs. Exposure modules for questionnaires used in epidemiologic studies might benefit from seeking information on products used within a task context.
Subject(s)
Disinfectants/analysis , Health Personnel , Occupational Exposure/analysis , Volatile Organic Compounds/analysis , Air Pollutants/analysis , Humans , Principal Component Analysis , VentilationABSTRACT
BACKGROUND: Workers manufacturing indium-tin oxide (ITO) are at risk of elevated indium concentration in blood and indium lung disease, but relationships between respirable indium exposures and biomarkers of exposure and disease are unknown. METHODS: For 87 (93%) current ITO workers, we determined correlations between respirable and plasma indium and evaluated associations between exposures and health outcomes. RESULTS: Current respirable indium exposure ranged from 0.4 to 108 µg/m(3) and cumulative respirable indium exposure from 0.4 to 923 µg-yr/m(3) . Plasma indium better correlated with cumulative (rs = 0.77) than current exposure (rs = 0.54) overall and with tenure ≥1.9 years. Higher cumulative respirable indium exposures were associated with more dyspnea, lower spirometric parameters, and higher serum biomarkers of lung disease (KL-6 and SP-D), with significant effects starting at 22 µg-yr/m(3) , reached by 46% of participants. CONCLUSIONS: Plasma indium concentration reflected cumulative respirable indium exposure, which was associated with clinical, functional, and serum biomarkers of lung disease. Am. J. Ind. Med. 59:522-531, 2016. Published 2016. This article is a U.S. Government work and is in the public domain in the USA.
Subject(s)
Indium/blood , Lung Diseases/chemically induced , Occupational Exposure/analysis , Tin Compounds/analysis , Adult , Air Pollutants, Occupational/analysis , Biomarkers/analysis , Biomarkers/blood , Environmental Monitoring , Humans , Indium/adverse effects , Lung Diseases/diagnosis , Middle Aged , Occupational Exposure/adverse effects , Occupations , Spirometry , Tin Compounds/adverse effectsABSTRACT
Work-related asthma is asthma that is caused or exacerbated by exposure to specific substances in the workplace. Approximately 10%-16% of adult-onset asthma cases are attributable to occupational factors, and estimates of asthma exacerbated by work range from 13% to 58%. During 2008-2012, the Massachusetts Department of Public Health received nine reports of work-related asthma among workers at a facility that manufactured syntactic foam used for flotation in the offshore oil and gas industry. These reports and a request from facility employees led to a CDC health hazard evaluation during 2012-2013 in which CDC reviewed records, toured the facility, and administered a questionnaire to current employees. Investigators found that workers' risk for asthma increased substantially after hire, possibly because of known asthma triggers (i.e., asthmagens) used in production. The company has since initiated efforts to reduce employee exposures to these substances. This cluster of work-related asthma was identified through CDC-funded, state-based surveillance and demonstrates complementary state and federal investigations.
Subject(s)
Asthma/diagnosis , Asthma/epidemiology , Chemical Industry , Occupational Diseases/diagnosis , Occupational Exposure/adverse effects , Adult , Aged , Cluster Analysis , Female , Humans , Male , Massachusetts/epidemiology , Middle Aged , Occupational Diseases/epidemiology , Polyurethanes , Young AdultABSTRACT
BACKGROUND: Healthcare workers have an elevated prevalence of asthma and related symptoms associated with the use of cleaning/disinfecting products. The objective of this study was to identify and characterize cleaning/disinfecting tasks and products used among hospital occupations. METHODS: Workers from 14 occupations at five hospitals were monitored for 216 shifts, and work tasks and products used were recorded at five-minute intervals. The major chemical constituents of each product were identified from safety data sheets. RESULTS: Cleaning and disinfecting tasks were performed with a high frequency at least once per shift in many occupations. Medical equipment preparers, housekeepers, floor strippers/waxers, and endoscopy technicians spent on average 108-177 min/shift performing cleaning/disinfecting tasks. Many occupations used products containing amines and quaternary ammonium compounds for >100 min/shift. CONCLUSIONS: This analysis demonstrates that many occupations besides housekeeping incur exposures to cleaning/disinfecting products, albeit for different durations and using products containing different chemicals.
Subject(s)
Disinfection/statistics & numerical data , Health Personnel/statistics & numerical data , Housekeeping, Hospital/statistics & numerical data , Occupational Exposure/statistics & numerical data , Communicable Disease Control/methods , Detergents/chemistry , Detergents/therapeutic use , Disinfectants/chemistry , Disinfectants/therapeutic use , Disinfection/methods , Health Personnel/classification , Hospitals , Hospitals, Teaching , Humans , Material Safety Data Sheets , New England , Occupational Exposure/analysis , Southeastern United StatesABSTRACT
Inhalation of beryllium is associated with the development of sensitization; however, dermal exposure may also be important. The primary aim of this study was to elucidate relationships among exposure pathways in four different manufacturing and finishing facilities. Secondary aims were to identify jobs with increased levels of beryllium in air, on skin, and on surfaces; identify potential discrepancies in exposure pathways, and determine if these are related to jobs with previously identified risk. Beryllium was measured in air, on cotton gloves, and on work surfaces. Summary statistics were calculated and correlations among all three measurement types were examined at the facility and job level. Exposure ranking strategies were used to identify jobs with higher exposures. The highest air, glove, and surface measurements were observed in beryllium metal production and beryllium oxide ceramics manufacturing jobs that involved hot processes and handling powders. Two finishing and distribution facilities that handle solid alloy products had lower exposures than the primary production facilities, and there were differences observed among jobs. For all facilities combined, strong correlations were found between air-surface (rp ≥ 0.77), glove-surface (rp ≥ 0.76), and air-glove measurements (rp ≥ 0.69). In jobs where higher risk of beryllium sensitization or disease has been reported, exposure levels for all three measurement types were higher than in jobs with lower risk, though they were not the highest. Some jobs with low air concentrations had higher levels of beryllium on glove and surface wipe samples, suggesting a need to further evaluate the causes of the discrepant levels. Although such correlations provide insight on where beryllium is located throughout the workplace, they cannot identify the direction of the pathways between air, surface, or skin. Ranking strategies helped to identify jobs with the highest combined air, glove, and/or surface exposures. All previously identified high-risk jobs had high air concentrations, dermal mass loading, or both, and none had low dermal and air. We have found that both pathways are relevant. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resource: a file describing the forms of beryllium materials encountered during production and characteristics of the aerosols by process areas.].
Subject(s)
Air Pollutants, Occupational/analysis , Beryllium/analysis , Metallurgy , Occupational Exposure/analysis , Aerosols , Dust/analysis , Environmental Monitoring/methods , Gloves, Protective , Humans , SkinABSTRACT
OBJECTIVES: To better understand respiratory symptoms and lung function in flavouring manufacturing workers. METHODS: We offered a questionnaire and lung function testing to the current workforce of a flavouring manufacturing facility that had transitioned away from diacetyl and towards substitutes in recent years. We examined symptoms, spirometric parameters and diffusing capacity measurements by exposure variables, including facility tenure and time spent daily in production areas. We used linear and logistic regression to develop final models adjusted for age and smoking status. RESULTS: A total of 367 (93%) current workers participated. Shortness of breath was twice as common in those with tenure ≥ 7 years (OR 2.0, 95% CI 1.1 to 3.6). Other chest symptoms were associated with time spent daily in production. Participants who spent ≥ 1 h daily in production areas had twice the odds of any spirometric abnormality (OR 2.3; 95% CI 1.1 to 5.3) and three times the odds of low diffusing capacity (OR 2.8; 95% CI 0.9 to 9.4) than other participants. Mean spirometric parameters were significantly lower in those with tenure ≥ 7 years and those who spent ≥ 1 h daily in production. Mean diffusing capacity parameters were significantly lower in those with tenure ≥ 7 years. Differences in symptoms and lung function could not be explained by age, smoking status or employment at another flavouring plant. CONCLUSIONS: Symptoms and lung function findings were consistent with undiagnosed or subclinical obliterative bronchiolitis and associated with workplace exposures. Further efforts to lower exposures to flavouring chemicals, including diacetyl substitutes, are warranted.
Subject(s)
Bronchiolitis Obliterans/etiology , Diacetyl/adverse effects , Flavoring Agents/adverse effects , Industry , Lung/physiopathology , Occupational Diseases/etiology , Occupational Exposure/adverse effects , Adult , Aged , Air Pollutants, Occupational/adverse effects , Bronchiolitis Obliterans/physiopathology , Cross-Sectional Studies , Dyspnea/etiology , Female , Forced Expiratory Volume , Humans , Male , Middle Aged , Occupational Diseases/physiopathology , Odds Ratio , Respiratory Function Tests , Spirometry , Surveys and Questionnaires , Vital Capacity , Work , Young AdultABSTRACT
BACKGROUND: In 2000, a manufacturer of beryllium materials and products introduced a comprehensive program to prevent beryllium sensitization and chronic beryllium disease (CBD). We assessed the program's efficacy in preventing sensitization 9 years after implementation. METHODS: Current and former workers hired since program implementation completed questionnaires and provided blood samples for the beryllium lymphocyte proliferation test (BeLPT). Using these data, as well as company medical surveillance data, we estimated beryllium sensitization prevalence. RESULTS: Cross-sectional prevalence of sensitization was 0.7% (2/298). Combining survey results with surveillance results, a total of seven were identified as sensitized (2.3%). Early Program workers were more likely to be sensitized than Late Program workers; one of the latter was newly identified. All sensitization was identified while participants were employed. One worker was diagnosed with CBD during employment. CONCLUSIONS: The combination of increased respiratory and dermal protection, enclosure and improved ventilation of high-risk processes, dust migration control, improved housekeeping, and worker and management education showed utility in reducing sensitization in the program's first 9 years. The low rate (0.6%, 1/175) among Late Program workers suggests that continuing refinements have provided additional protection against sensitization compared to the program's early years.
Subject(s)
Berylliosis/prevention & control , Immunization , Occupational Exposure/adverse effects , Occupational Health , Primary Prevention/organization & administration , Adult , Berylliosis/epidemiology , Berylliosis/immunology , Beryllium/blood , Chronic Disease , Cross-Sectional Studies , Female , Humans , Inhalation Exposure , Male , Middle Aged , Prognosis , Program Development , Program Evaluation , Protective Clothing , Risk Assessment , Surveys and Questionnaires , Time FactorsABSTRACT
BACKGROUND: We evaluated the effectiveness of workplace changes to prevent indium lung disease, using 2002-2010 surveillance data collected by an indium-tin oxide production facility. METHODS: We assessed pulmonary function using lower limits of normal. Blood indium concentration and personal air sampling data were used to estimate exposure. RESULTS: Abnormalities were uncommon at hire. After hire, prevalence of spirometric restriction was 31% (n = 14/45), about fourfold higher than expected. Excessive decline in FEV1 was elevated at 29% (n = 12/41). Half (n = 21/42) had blood indium ≥5 µg/l. More recent hires had fewer abnormalities. There was a suggestion that abnormalities were more common among workers with blood indium ≥5 µg/l, but otherwise an exposure-response relationship was not evident. Peak dust concentrations were obscured by time averaging. CONCLUSIONS: Evolving lung function abnormalities consistent with subclinical indium lung disease appeared common and merit systematic investigation. Traditional measures of exposure and response were not illustrative, suggesting fresh approaches will be needed. Workplace changes seemed to have had a positive though incomplete impact; novel preventive interventions are warranted.