Effects of integrated care with case management and nutritional counselling for frail older adults with nutritional risk in the primary care setting.

BACKGROUND: The effects of integrated care with case management and nutritional counselling for frail patients with nutritional risk are unclear. OBJECTIVES: To assess the impact of the integrated care model for frail patients with nutritional risk in the primary care setting. METHODS: This was a retrospective observational study. We enrolled 100 prefrail or frail patients according to Clinical Frailty Scale (CFS) aged ≥ 60 years with nutritional risk from the geriatric clinic. We implemented the frailty intervention model, including integrated care with comprehensive geriatric assessments (CGA), case management, and nutritional counselling by the dietitian. We obtained measures of CGA components, physical performance, body mass index (BMI), and daily caloric intake before and after the 2-month care program. We used the Wilcoxon signed-rank test to analyse differences after the care program and applied multiple linear regression to determine the predictive factors for CFS improvement. RESULTS: Among the 100 patients (mean age, 75.0 ±â€…7.2 years; females, 71.0%; frail patients, 26%), 93% improved their CFS status, and 91% achieved > 80% of recommended daily caloric intake after the care program. The Mini Nutritional Assessment Short-Form significantly improved after the program. BMI and daily caloric intake increased significantly after nutritional counselling. The post-test short physical performance battery (SPPB) significantly increased with a faster 4 m gait speed. Baseline poor CFS was a significant predictor for CFS improvement. CONCLUSIONS: Integrated care with case management and nutritional counselling for prefrail and frail patients with nutritional risk in the primary care setting may improve physical performance and nutritional status.

Frailty, a state of vulnerability in older adults, can lead to various health issues. Early intervention in poor nutrition can be beneficial in managing frailty. Integrated care with comprehensive assessments has demonstrated its effectiveness in managing frail older adults. However, there are limited models designed for primary care, and nutritional intervention alone may not be adequate. This retrospective observational study, conducted in a specialized primary care unit for geriatric patients, enrolled prefrail and frail individuals at nutritional risk. A multidisciplinary team implemented an integrated care model that included comprehensive geriatric assessments, case management, and nutritional counselling. After the care program, a significant majority of patients exhibited improved Clinical Frailty Scale status, along with a high proportion achieving 80% of their recommended daily caloric intake. The study also revealed improved physical performance measured by the Short Physical Performance Battery, and a faster 4 m gait speed. Additionally, both BMI and daily caloric intake significantly increased after nutritional counselling. These findings highlight the positive impact of integrated care, including comprehensive assessments, case management, and nutritional counselling, on the physical performance and nutritional status of prefrail and frail older adults.

Improving the Physical Properties of Starch-Based Powders for Potential Anti-Adhesion Applications.

Postoperative adhesion is one of the most common complications that occur during and after surgery; thus, materials that can prevent adhesion are often applied. Starch powders with a high water absorption capacity are preferred, and many studies have focused on increasing the water absorption of modified starches, as native starch powders display poor water-holding capacities. The effects of salts on the physical properties of acetylated distarch phosphate potato starch powders were investigated here. Changes in functional groups, the crystal structures of modified starch, particle morphologies, water absorption, viscosity, and in vivo adhesion were investigated. The results showed that salts greatly improved the water absorption and viscosity of acetylated distarch phosphate potato starch powders. Among the three different salt-modified starch powders, NaCl-modified starch powders displayed higher water absorption and viscosity and demonstrated better in vivo anti-adhesion performance. The results of this study propose a potential biomaterial that may function as an anti-adhesive, potentially leading to reduced surgical risks and a better quality of life for patients.

Early diagnosis of caesarean scar pregnancy by ultrasound - a novel, simple and rapid clinical classification scoring system.

AIM: In the recent years, with the increase in the caesarean section rate, the incidence of caesarean scar pregnancy (CSP) has shown a significant upwards trend. We propose a novel, simple and rapid clinical and ultrasound (US) classification scoring system to assist in the early diagnosis of CSP. MATERIAL AND METHODS: A total of 385 patients with CSP were included in the study. All patients were given a comprehensive score, iincluding clinical data (whether HCG is consistent with gestational age and vaginal bleeding) and US findings (linea a and b, gestational sac morphology, the presence of primitive cardiac tube beat, and color Doppler aspect). The scores were analysed by ROC curve analysis, and sensitivity and specificity were calculated. RESULTS: A score of 4 has a specificity of 91.7% and a sensitivity of 95.6% in diagnose CSP. The area under the ROC curve was 0.973. CONCLUSION: This scoring system may be a reliable tool for the early diagnosis of CSP and has the characteristics of being simple and rapid. For patients with a total score of ≥4 points, CSP is suggested, and early clinical treatment can be carried out, while patients with a score of less than 4 points can temporarily retain pregnancy and be closely followed up.

Ursolic acid alleviates steroid-induced avascular necrosis of the femoral head in mouse by inhibiting apoptosis and rescuing osteogenic differentiation.

Steroid-induced avascular necrosis of femoral head (SANFH) is a common disorder worldwide with high disability. Overdose of glucocorticoid (GC) is the most common non-traumatic cause of SANFH. Up until now, there are limited therapeutic strategies for curing SANFH, and the mechanisms underlying SANFH progression remain unclear. Nevertheless, Osteogenic dysfunction is considered to be one of the crucial pathobiological mechanisms in the development of SANFH, which involves mouse bone marrow mesenchymal stem cells (BMSCs) apoptosis and osteogenic differentiation disorder. Ursolic acid (UA), an important component of the Chinese medicine formula Yougui Yin, has a wide range of pharmacological properties such as anti-tumor, anti-inflammatory and bone remodeling. Due to the positive effect of Yougui Yin on bone remodeling, the purpose of this study was to investigate the effects of UA on dexamethasone (DEX)-induced SANFH in vitro and vivo. In vitro, we demonstrated that UA can promote mouse BMSCs proliferation and resist DEX-induced apoptosis by CCK8, Western blotting, TUNEL and so on. In addition, vitro experiments such as ALP and Alizarin red staining assay showed that UA had a beneficial effect on the osteogenic differentiation of mouse BMSCs. In vivo, the results of H&E staining, immunohistochemistry staining, Elisa and micro-CT analysis showed that UA had a bone repair-promoting effect in SANFH model. Moreover, the results of Western blot and TUNEL experiments showed that UA could delay the disease progression of SANFH in mice by inhibiting apoptosis. Overall, our study suggests that UA is a potential compound for the treatment of SANFH.

Long-term effects of tear film component deposition on the surface and optical properties of two different orthokeratology lenses.

PURPOSE: To understand the effects of long-term deposition of tear film components on the surface and optical properties of orthokeratology (ortho-k) lenses, two different lenses, Brighten 22 and Optimum Extra, were tested here. METHODS: Ortho-k lenses were immersed in artificial tears and cleaned with a commercial care solution repeatedly for up to 90 days. Both the daily and accumulated lysozyme deposition amounts using an Enzyme-Linked ImmunoSorbent Assay were then analyzed. The base curve, central thickness, power, and transmission of visible light, ultraviolet A, and ultraviolet B were analyzed before and after repeated tear film component deposition procedures. The surface roughness using atomic force microscopy was observed and an energy dispersive spectrometer was used to analyze the composition of the deposits. RESULTS: The highest levels of lysozyme were adsorbed on both lens materials during the first four days of the procedure and became saturated by day 6. For both lens materials, contamination on the lenses was easily observed by day 30, and the degree of surface roughness was higher. The transmission levels of different light spectrums were reduced showing that the optical characteristics of both lenses were also affected. CONCLUSIONS: The results provide in vitro evidence that lysozyme could not be completely removed from orthokeratology lenses. Both surface and optical properties were affected by the deposition of tear film components. However, only one commercial multipurpose care solution was used to clean the lens in this study when the main ingredient was a surfactant, and the results might be different when other care regimens with other key ingredients are used. In addition, whether tear film component deposition might result in increased risks of infection or corneal abrasion will require further investigation.

In vitro studies of factors affecting debridement of dental implants by tricalcium phosphate powder abrasive treatment.

Peri-implantitis is a common complication characterized by inflammation in tissues surrounding dental implants due to plaque accumulation, which can lead to implant failure. While air flow abrasive treatment has been found to be effective for debriding implant surfaces, little is known about the factors that affect its cleaning capacity. This study systematically examined the cleaning capacity of air powder abrasive (APA) treatment with ß-tricalcium phosphate (ß-TCP) powder, using various powder jetting strengths and different particle sizes. Three sizes of ß-TCP powder (S, M, and L) were prepared, and different powder settings (low, medium, and high) were tested. The cleaning capacity was determined by quantifying ink removal, which simulated biofilm removal from the implant surfaces at different time points. The results of the systematic comparisons showed that the most efficient cleaning of implant surfaces was achieved using size M particles with medium setting. Additionally, the amount of powder consumed was found to be critical to cleaning efficiency, and the implant surfaces were altered in all tested groups. These systematically analyzed outcomes may provide insights into the development of potential non-surgical strategies for treating peri-implant diseases.

Production of Modified Autologous Conditioned Serum and Ex Vivo Assessment of Its Healing Potential in Murine Corneal Epithelium.

Human blood-derived topical therapies have been a boon to clinicians in recent decades. Autologous serum (AS) and platelet-rich plasma (PRP) are enriched in epitheliotropic growth factors that are essential in corneal wound healing. Unlike AS, PRP is based on a differential centrifugation system, yielding more platelet-derived growth factors. Autologous conditioned serum (ACS) not only preserves the preparation of AS and PRP, but also focuses on immune-modulating properties, which are important in inflammatory diseases. The lack of standardized protocols and high preparation costs are limitations for the clinical application of ACS. This video experiment demonstrates a standard operating procedure for preparing modified autologous conditioned serum (mACS) eye drops. First, glycerol was added into heparin syringes as the blood cell stabilizer during hypoxic incubation. To activate the blood cells, a 4 h incubation at 37 °C was initiated. Then, the blood samples were centrifuged at 3,500 × g for 10 min at room temperature. After filtration of the supernatant through a 0.22 µm filter, the mACS eye drops were fully prepared. A tentative try-out of the therapeutic effect of mACS showed that it may have competitive advantages over conventional AS in the corneal wound healing in ex vivo mouse eyes. The AS used in this study was prepared according to published studies and the clinical practice in our hospital. Therefore, the efficacy of mACS on ocular surface diseases could be evaluated in future research through in vivo animal studies and clinical trials.

Distinct Expression of Surface and Genetic Biomarkers in Prostate Cancer Cell Lines.

BACKGROUND/AIM: Surface biomarkers, such as CD44 and CD133, have been demonstrated to be expressed in prostate cancer cells, and our previous study has shown that prostate cancer cell lines could be divided into three groups according to the single and combined expression pattern of CD44 and 133. In order to refine prognostication in prostate cancer cells, we further investigated genetic biomarkers, prostate cancer antigen 3 (PCA3), kallikrein 4 (KLK4), and KLK9 in different prostate cancer cell lines. MATERIALS AND METHODS: CWR22Rv1, PC3, and DU145 cell lines were cultured until 95% confluence. The single expression of CD44 or CD133 and their combined expression were analyzed by flow cytometry, and gene expression of b-actin, PCA3, KLK4, and KLK9 was analyzed by real-time polymerase chain reaction. RESULTS: The single expression of CD133 was less than 4% in all cell lines examined. PC3 and DU145 cells displayed a high expression of CD44 (>91%), whereas CWR22Rv1 was the only cell line that demonstrated a high co-expression of both CD44 and CD133 (>91%). In addition, PC3 and DU145 displayed low expression of PCA3, KLK4, and KLK9 when compared with their own b-actin expression. In contrast, CWR22Rva showed high expression of PCA3 and KLK4 although KLK9 expression was also low. CONCLUSION: Both surface and genetic biomarkers should be validated for a more accurate prognosis in prostate cancer.

Investigation and Characterization of Factors Affecting Rheological Properties of Poloxamer-Based Thermo-Sensitive Hydrogel.

Poloxamers are negatively temperature-sensitive hydrogels and their hydrophilic groups interact with water molecules at lower temperatures (liquid phase) while their hydrophobic groups interact more strongly with increases in temperature causing gelation. To investigate the factors affecting the rheological properties of poloxamers, various parameters including different poloxamer P407 concentrations, poloxamers P407/P188 blending ratios and additives were examined. The results presented a clear trend of decreasing gelling temperature/time when P407 was at higher concentrations. Moreover, the addition of P188 enhanced the gelling temperature regardless of poloxamer concentration. Polysaccharides and their derivatives have been widely used as components of hydrogel and we found that alginic acid (AA) or carboxymethyl cellulose (CMC) reduced the gelling temperature of poloxamers. In addition, AA-containing poloxamer promoted cell proliferation and both AA -and CMC-containing poloxamer hydrogels reduced cell migration. This study investigated the intriguing characteristics of poloxamer-based hydrogel, providing useful information to compounding an ideal and desired thermo-sensitive hydrogel for further potential clinical applications such as development of sprayable anti-adhesive barrier, wound-healing dressings or injectable drug-delivery system for cartilage repair.

Preparation and Characterization of Extracellular Matrix Hydrogels Derived from Acellular Cartilage Tissue.

Decellularized matrices can effectively reduce severe immune rejection with their cells and eliminated nucleic acid material and provide specific environments for tissue repair or tissue regeneration. In this study, we prepared acellular cartilage matrix (ACM) powder through the decellularization method and developed ACM hydrogels by physical, chemical, and enzymatic digestion methods. The results demonstrated that the small size group of ACM hydrogels exhibited better gel conditions when the concentration of ACM hydrogels was 30 and 20 mg/mL in 1N HCl through parameter adjustment. The data also confirmed that the ACM hydrogels retained the main components of cartilage: 61.18% of glycosaminoglycan (GAG) and 78.29% of collagen, with 99.61% of its DNA removed compared to samples without the decellularization procedure (set as 100%). Through turbidimetric gelation kinetics, hydrogel rheological property analysis, and hydrogel tissue physical property testing, this study also revealed that increasing hydrogel concentration is helpful for gelation. Besides, the ex vivo test confirmed that a higher concentration of ACM hydrogels had good adhesive properties and could fill in cartilage defects adequately. This study offers useful information for developing and manufacturing ACM hydrogels to serve as potential alternative scaffolds for future cartilage defect treatment.

The Effect of Polysaccharides on Preventing Proteins and Cholesterol from Being Adsorbed on the Surface of Orthokeratology Lenses.

The adsorption of tear film compositions such as proteins and lipids on the orthokeratology lenses often lead to infection or corneal damage. In order to investigate whether polysaccharides could prevent tear compositions from being adsorbed on the lens, alginic acid and lambda-carrageenan were added into artificial tear solution. By measuring daily adsorption of cholesterol, lysozyme, and albumin, our results showed that polysaccharides could weakly prevent cholesterol adsorption. In addition, polysaccharides could also reduce albumin deposition over time. Although the effect of polysaccharides on lysozyme adsorption was distinct depending on the concentrations of polysaccharides, the overall results demonstrated that polysaccharides could decrease protein deposition over time. Our results provided an in vitro evidence that polysaccharides may be applied as coating materials on the lens or as the composition of artificial tear solutions or eyedrops, in order to prevent adsorption of tear film compositions that may lead to a reduced incidence of infection or corneal damage for orthokeratology lens wearers.

The efficacy of vancomycin-loaded biphasic calcium phosphate bone substitute in the promotion of new bone growth and the prevention of postoperative infection.

Background: Due to the increasing need for suitable alternatives to bone grafts, artificial bones made of biphasic calcium phosphate (BCP) are currently being extensively researched. These porous bone substitutes have also demonstrated considerable incorporation with the host bone, and new bone is able to grow within the porous structure. They therefore offer a potential therapeutic approach for bone defects. Methods: Vancomycin-loaded Bicera™, a BCP bone substitute, was investigated in order to prevent implant-associated osteomyelitis and postoperative infection after orthopedic surgery. The loading capacity of Bicera™ was measured to understand its potential antibiotic adsorption volume. An antibiotic susceptibility test was also carried out to analyze the effect of Bicera™ loaded with different concentrations of vancomycin on the growth inhibition of methicillin-resistant Staphylococcus aureus (MRSA). Vancomycin-loaded Bicera™ was implanted into rabbits with bone defects, and general gross, radiographic, and histological evaluation was undertaken at 4, 12, and 24 weeks after implantation. Results: The maximum loading capacity of vancomycin-loaded Bicera™ was 0.9 ml of liquid regardless of the vancomycin concentration. Antibiotic susceptibility tests showed that vancomycin-loaded Bicera™ inhibited the growth of MRSA for 6 weeks. In addition, animal studies revealed that new bone grew into the vancomycin-loaded Bicera™. The percentage of new bone formation from 4 to 24 weeks after implantation increased from 17% to 36%. Conclusion: Vancomycin-loaded Bicera™ could effectively inhibit the growth of MRSA in vitro. It was found to incorporate into the host bone well, and new bone was able to grow within the bone substitute. The results of this study indicate that vancomycin-loaded Bicera™ is a potential bone substitute that can prevent implant-associated osteomyelitis and postoperative infection.

LIMS2 is Downregulated in Osteosarcoma and Inhibits Cell Growth and Migration.

Methods: GEO, GEPIA, and UALCAN databases were used to assess LIMS2 expression in OS. UALCAN and CCLE databases were applied to assess the methylation levels of LIMS2 in OS tissues and cells, which was verified in OS cells using the methylation specific PCR. The effects of LIMS2 on regulating OS cell growth, migration and invasion were determined by CCK-8, Edu staining, and transwell chambers, respectively. The role of LIMS2 in the activation of MAPK signaling was assessed using western blotting assay in OS cells. Results: LIMS2 expression was declined in OS tissues and cells, while its methylation level was increased. The low expression of LIMS2 was associated with shorter overall survival and disease-free survival. Overexpression of LIMS2 inhibited cell growth, migration, and invasion and decreased the levels of p-ERK/ERK, p-P38/P38, and p-JNK/JNK. Conclusion: LIMS2 expression was decreased in OS, which was associated with hypermethylation level and poor prognosis. LIMS2 overexpression inhibited OS cell growth and migration, which may be caused by the suppression of MAPK signaling.

Hemophilia A developing cerebral infarction after surgical treatment of giant hemophilic pseudotumor: a case report.

BACKGROUND: Cerebral infarction (CI) is an unusual complication in patients with bleeding disorders. To our knowledge, this is the first case of postoperative internal border-zone infarction (I-BZI) from Hemophilia A. CASE PRESENTATION: We present a case of Hemophilia A developing I-BZI, after surgical treatment of giant hemophilic pseudotumor. A 36-year-old man was introduced from other hospital by Hemophilia with giant hemophilic pseudotumor in his left thigh. Patient and his relatives did not have a history of thrombophilia. After excluding the relevant surgical contraindications, we performed the operation of pseudotumor resection. Prior to surgery, blood tests revealed hemoglobin of 137 g/L. FVIII activity was 1.5%. Activated partial thromboplastin time (APTT) was 71.50 s and D-dimer was 3.33 mg/L FEU. Immediately before surgery, the patient received an intravenous infusion of FVIII products (Xyntha®) at a dose of 3500 IU for his body weight of 80 kg. Post-operative day two (POD2), patient developed vomiting, decreased response, and dysarthria. Hemoglobin was 54 g/L with blood pressure of 110/70 mmHg. Magnetic resonance imaging of the brain showed there were multiple acute cerebral infarctions in bilateral lateral ventricles (internal border zone) and multiple ischemic foci in the white matter areas and basal ganglia of the bilateral cerebral hemispheres. This case suggested that acute severe anemia can be one of the causes of I-BZI. CONCLUSIONS: For the treatment of I-BZI caused by acute anemia from Hemophilia A, volume expansion, red blood cell supplement and continuous improvement of coagulation with suitable dose of factor VIII (FVIII) should be considered to improve prognosis.

Development of Injectable Calcium Sulfate and Self-Setting Calcium Phosphate Composite Bone Graft Materials for Minimally Invasive Surgery.

The demand of bone grafting is increasing as the population ages worldwide. Although bone graft materials have been extensively developed over the decades, only a few injectable bone grafts are clinically available and none of them can be extruded from 18G needles. To overcome the existing treatment limitations, the aim of this study is to develop ideal injectable implants from biomaterials for minimally invasive surgery. An injectable composite bone graft containing calcium sulfate hemihydrate, tetracalcium phosphate, and anhydrous calcium hydrogen phosphate (CSH/CaP paste) was prepared with different CSH/CaP ratios and different concentrations of additives. The setting time, injectability, mechanical properties, and biocompatibility were evaluated. The developed injectable CSH/CaP paste (CSH/CaP 1:1 supplemented with 6% citric acid and 2% HPMC) presented good handling properties, great biocompatibility, and adequate mechanical strength. Furthermore, the paste was demonstrated to be extruded from a syringe equipped with 18G needles and exerted a great potential for minimally invasive surgery. The developed injectable implants with tissue repairing potentials will provide an ideal therapeutic strategy for minimally invasive surgery to apply in the treatment of maxillofacial defects, certain indications in the spine, inferior turbinate for empty nose syndrome (ENS), or reconstructive rhinoplasty.

Investigating Factors Influencing Nurses' Behavioral Intention to Use Mobile Learning: Using a Modified Unified Theory of Acceptance and Use of Technology Model.

The purpose of this study was to develop and empirically test a model for predicting the key factors affecting nurses' behavioral intention to use mobile learning (m-learning). We explored behavioral intention from users' perspectives by applying an extended unified theory of acceptance and use of technology (UTAUT) model with the addition of information quality, system quality, technostress, and satisfaction. We conducted a survey of the district and regional hospitals in central Taiwan. Data were derived from 434 respondents. Structural equation modeling was applied to analyze the causal effects of 15 hypothesized predictive factors. We determined that satisfaction, social influence, performance expectancy, facilitating conditions, and effort expectancy positively impacted nurses' behavioral intention to use m-learning. In addition, technostress was a negative antecedent of effort expectancy. Information quality and system quality had significantly positive effects on satisfaction, performance expectancy, and effort expectancy. This study provides hospital managers with a reference when assessing future developments and informs approaches to promote m-learning.

Evaluating Pull-Out Strength of Barbed Suture In Vitro by Using Porcine Tissue and Polydimethylsiloxane (PDMS).

Using barbed thread lifting for facial rejuvenation has become popular these days due to its minimally invasive procedures with reduced complications. However, only limited studies regarding its mechanical properties for face suspension were published. The aim of this study was to evaluate suture-holding ability regarding its facelift property, and different specimens were tested in order to establish an in vitro model. Fresh porcine tissue and the synthetic material polydimethylsiloxane (PDMS) were selected to simulate human skin for evaluating barbed suture pull-out strength by the universal material testing machine. The results showed that the pull-out strength of barbs between different porcine tissues varied without consistency. By contrast, PDMS (30:1) showed more consistent pull-out strength in each testing, and the average maximum load force was close to porcine tissue. Furthermore, after submerging barbed sutures in PBS for 0 days (T0), 7 days (T7) and 14 days (T14), a trend of decreased average maximum load force, displacement and force of 1.5 mm/2 mm/3 mm displacement could be detected by in vitro testing with PDMS (30:1). These results provide support for using PDMS (30:1) to evaluate suture pull-out strength and holding/lifting capacities in vitro to obtain consistent and objective information for evaluating substantial equivalence of devices. The established in vitro method could be used for the future development of barbed thread lifting technology.

The Effect of Different Cleaning Methods on Protein Deposition and Optical Characteristics of Orthokeratology Lenses.

Orthokeratology lenses are commonly used for myopia control, especially in children. Tear lipids and proteins are immediately adsorbed when the lens is put on the cornea, and protein deposition may cause discomfort or infection. Therefore, we established an in vitro protein deposition analysis by mimicking the current cleaning methods for orthokeratology lens wearers for both short-term and long-term period. The results showed that the amounts of tear proteins accumulated daily and achieved a balance after 14 days when the lens was rubbed to clean or not. Protein deposition also affected the optical characteristics of the lens regardless of cleaning methods. Our results provided an in vitro analysis for protein deposition on the lens, and they may provide a potential effective method for developing care solutions or methods that can more effectively remove tear components from orthokeratology lenses.

Preparation and Characterization of Moldable Demineralized Bone Matrix/Calcium Sulfate Composite Bone Graft Materials.

Demineralized bone matrix (DBM) is a decalcified allo/xenograft retaining collagen and noncollagenous proteins, which has been extensively used because of its osteoconductive and osteoinductive properties. Calcium sulfate (CaSO4, CS) is a synthetic bone substitute used in bone healing with biocompatible, nontoxic, bioabsorbable, osteoconductive, and good mechanical characteristics. This study aims to prepare a DBM/CS composite bone graft material in a moldable putty form without compromising the peculiar properties of DBM and CS. For this purpose, firstly, porcine femur was defatted using chloroform/methanol and extracted by acid for demineralization, then freeze-dried and milled/sieved to obtain DBM powder. Secondly, the α-form and ß-form of calcium sulfate hemihydrate (CaSO4·0.5H2O, CSH) were produced by heating gypsum (CaSO4·2H2O). The morphology and particle sizes of α- and ß-CSH were obtained by SEM, and their chemical properties were confirmed by EDS, FTIR and XRD. Furthermore, the DBM-based graft was mixed with α- or ß-CSH at a ratio of 9:1, and glycerol/4% HPMC was added as a carrier to produce a putty. DBM/CSH putty possesses a low washout rate, good mechanical strength and biocompatibility. In conclusion, we believe that the moldable DBM/CSH composite putty developed in this study could be a promising substitute for the currently available bone grafts, and might have practical application in the orthopedics field as a potential bone void filler.

Albumin Acts as a Lubricant on the Surface of Hydrogel and Silicone Hydrogel Contact Lenses.

Feeling comfortable is the greatest concern for contact lens wearers, and it has been suggested that in vivo comfort could be corresponded to the in vitro friction coefficient of contact lenses. How tear albumin could affect the friction coefficient of silicone hydrogel and hydrogel contact lenses was analyzed by sliding a lens against a quartz glass in normal and extremely high concentration of albumin solution. Albumin deposition testing and surface roughness analysis were also conducted. The results showed that the friction coefficient of tested contact lenses did not correspond to both the albumin deposition amount and surface roughness, but we proposed a model of how albumin might act as a lubricant on the surface of some hydrogel and silicone hydrogel contact lenses. In conclusion, albumin provided lubrication for silicone hydrogel contact lenses regardless of albumin concentrations, while albumin only acted as a lubricant for hydrogel contact under normal concentration.