Superior End-Group Stacking Promotes Simultaneous Multiple Charge-Transfer Mechanisms in Organic Solar Cells with an All-Fused-Ring Nonfullerene Acceptor.

The all-fused-ring acceptor (AFRA) is a success for nonfullerene materials and has attracted considerable attention as its high optical and chemical stability expected to reduce energy loss, and power conversion efficiency (PCE) approaching 15% in constructed all-small-molecule organic solar cells (OSCs). Herein, the intrinsic role of the structure of AFRA F13 and the reason for its high PCE were revealed by comparison with those of typical fused acceptors IDT-IC and Y6. An increased degree of conjugation in F13 leads to broader and red-shifted absorption peaks, facilitating enhancement of the short-circuit current. Multiple charge-transfer mechanisms are mainly attributed to the higher Frenkel exciton (FE) state due to the multiple transition ways for acceptors in the C1-CN:F13 system. The increased number of atoms contributing to the charge-transfer (CT) state facilitated the existence of more superior stacking patterns with easy formation of CT and FE/CT states and a high charge separation rate. It was found using the AFRA is an effective strategy to enhance end-group stacking, enhancing the borrowing of oscillator strength to promote multiple CT mechanisms in the complexes, explaining the high performance of this OSC device. This work is promising to guide designing an efficient AFRA in the future.

A porous aromatic cage-based electrochemical sensor for enantioselective recognition of DOPA.

An electrochemical sensor based on porous aromatic cages was reported, which can achieve chiral sensing of DOPA enantiomers. The prepared sensor can achieve a recognition efficiency of up to 2.6 for DOPA enantiomers. The enhanced recognition efficiency could be attributed to the cooperation of intermolecular interactions, and the efficient charge transfer process.

Highly selective fluorescence turn-on sensor for·thiol compounds detection.

As a kind of commonly-used synthetic materials for many pesticides, thiol compounds, once being leaked, can cause serious harm to the environment and humans. Therefore, the efficient detection of thiol compounds is essential. In this study developed a turn-on fluorescent probe (Cu@Zn-CP) for the highly sensitive fluorescence detection of thiol compounds. The probe was constructed based on a zinc coordination polymer (Zn-CP), whose fluorescence was quenched through the effective doping of Cu2+ ions. After the introduction of methyl thioglycolate (MTC), a rapid fluorescence turn-on response was generated within 90 s with a low detection limit of 23 ppb. Even after being reused for five cycles, the sensor maintains excellent detection performance and demonstrates good recyclability. It can also detect MTC in river water, with a spike recovery rate between 98-103 %. Furthermore, the designed Cu@Zn-CP exhibits good universality for detecting multifarious thiol compounds, including L-cysteine, glutathione, monothioglycerol, and 2-hydroxy-1-ethanethiol. This result provides a potential recyclable fluorescent sensor for thiol compounds.

A hybridization-induced charge-transfer state energy arrangement reduces nonradiative energy loss in organic solar cells.

Here, we explain why the Energy Gap Law and the energy inversion related to the charge-transfer state have opposite effects on the trend of nonradiative energy loss of organic solar cells. The root is the existing condition of energy inversion. There is indeed a certain probability of energy inversion, but it will eventually be implicit or explicit as determined by the hybridization, which depends on the electron-withdrawing unit of the donor, giving rise to different stacking sites. The triplet-state hybridization leads to an explicit characteristic, while singlet-state hybridization leads to an implicit characteristic.

Preparation of a Nanosheeted Uranyl-Organic Framework for Enhanced Photocatalytic Oxidation of Toluene.

Preparation of ultrathin metal-organic framework (MOF) nanosheets is an effective way to improve the catalytic efficiency of MOF photocatalysts owing to their superiority in reducing the recombination rate of photogenerated electrons and holes and enhancing charge transfer. Herein, a light-sensitive two-dimensional uranyl-organic framework named HNU-68 was synthesized. Due to its interlayer stacking structure, the corresponding ultrathin nanosheets with a thickness of 4.4 nm (HNU-68-N) can be obtained through ultrasonic exfoliation. HNU-68-N exhibited an enhanced ability to selectively oxidize toluene to benzaldehyde, with the value of turnover frequency being approximately three times higher than that of the bulk HNU-68. This enhancement is attributed to the smaller size and interface resistance of the layered HNU-68-N nanosheets, which facilitate more thorough substrate contact and faster charge transfer, leading to an improvement in the photocatalytic efficiency. This work provides a potential candidate for the application of ultrathin uranyl-based nanosheets.

Light-Initiated Imprinted Membrane-Based Biomimetic SERS Sensor toward Selective Detection of Trace MC-LR.

Microcystin-LR (MC-LR) is a severe threat to human and animal health; thus, monitoring it in the environment is essential, especially in water quality protections. Herein, in this work, we synthesize PVDF/CNT/Ag molecular imprinted membranes (PCA-MIMs) via an innovative combination of surface-enhanced Raman spectroscopy (SERS) detection, membrane separation, and molecular-imprinted technique toward the analysis of MC-LR in water. In particular, a light-initiated imprint is employed to protect the chemical structure of the MC-LR molecules. Furthermore, in order to ensure the detection sensitivity, the SERS substrates are combined with the membrane via the assistance of magnetism. The effect of synthesis conditions on the SERS sensitivity was investigated in detail. It is demonstrated from the characteristic results that the PCA-MIMs present high sensitivity to the MC-LR molecules with excellent selectivity against the interfere molecules. Results clearly show that the as-prepared PCA-MIMs hold great potential applications to detect trace MC-LR for the protection of water quality.

Heterometallic MIL-125(Ti-Al) frameworks for electrochemical determination of ascorbic acid, dopamine and uric acid.

The detection of ascorbic acid (AA), dopamine (DA), and uric acid (UA) is not only of great significance in the areas of biomedicine and neurochemistry but also helpful in disease diagnosis and pathology research. Due to their diverse structures, designability, and large specific surface areas, metal-organic frameworks (MOFs) have recently caught considerable attention in the electrochemical field. Herein, a family of heterometallic MOFs with amino modification, MIL-125(Ti-Al)-xNH2 (x = 0%, 25%, 50%, 75%, and 100%), were synthesized and employed as electrochemical sensors for the detection of AA, DA, and UA. Among them, MIL-125(Ti-Al)-75%NH2 exhibited the most promising electrochemical behavior with 40% doping of carbon black in 0.1 M PBS (pH = 7.10), which displayed individual detection performance with wide linear detection ranges (1.0-6.5 mM for AA, 5-100 µM for DA and 5-120 µM for UA) and low limits of detection (0.215 mM for AA, 0.086 µM for DA, and 0.876 µM for UA, S/N = 3). Furthermore, the as-prepared MIL-125(Ti-Al)-75%NH2/GCE provided a promising platform for future application in real sample analysis, owing to its excellent anti-interference performance and good stability.

Theoretical Study and Design for Thermally Activated Delayed Fluorescence Emitters with Through-Space Charge Transfer from an Acridine Derivative Donor to an O-Bridged Triphenylboron Boroxy Acceptor.

The through-space charge transfer thermally activated delayed fluorescence (TSCT-TADF) properties of a series of molecules were characterized and tested theoretically by density functional theory and time-dependent density functional theory. By analyzing the weak interaction of the molecules at the ground state and calculating the transition contribution ratio of the donor, acceptor, and bridge in the excited state, we verified the through-space charge transfer characteristic of these molecules. We designed new molecules on the basis of the reported molecules (non-TADF molecule 1 and TADF molecule 2) to improve the performance. Smaller singlet-triplet energy gaps and larger spin-orbit coupling were obtained in the designed molecules, which is beneficial to obtain higher intersystem crossing and reverse intersystem crossing rates (kRISC). In addition, we calculated the radiation rate and the singlet-triplet reorganization energy, which is used to characterize the nonradiation rate. The comprehensive evaluation of both radiative and nonradiative processes shows that molecules 4 and 6 have the potential to be highly efficient TSCT-TADF materials.

Piezofluorochromism in Hierarchical Porous π-stacked Supermolecular Spring Frameworks from Aromatic Chiral Cages.

Piezochromic materials that exhibit pressure-dependent luminescence variations are attracting interest with wide potential applications in mechanical sensors, anticounterfeiting and storage devices. Crystalline porous materials (CPMs) have been widely studied in piezochromism for highly tunable luminescence. Nevertheless, reversible and high-contrast emission response with a wide pressure range is still challenging. Herein, the first example of hierarchical porous cage-based πOF (Cage-πOF-1) with spring structure was synthesized by using aromatic chiral cages as building blocks. Its elastic properties evaluated based on the bulk modulus (9.5 GPa) is softer than most reported CPMs and the collapse point (20.0 GPa) significantly exceeds ever reported CPMs. As smart materials, Cage-πOF-1 displays linear pressure-dependent emission and achieves a high-contrast emission difference up to 154 nm. Pressure-responsive limit is up to 16 GPa, outperforming the CPMs reported so far. Dedicated experiments and density functional theory (DFT) calculations illustrate that π-π interactions-dominated controllable structural shrinkage and porous-spring-structure-mediated elasticity is responsible for the outstanding piezofluorochromism.

Tuning optical properties of π-conjugated double nanohoops under external electric field stimuli-responsiveness.

Carbon nanorings have attracted substantial interest from synthetic chemists due to their unique topological structures and distinct physical properties. An intriguing π-conjugated double-nanoring structure, denoted as [8]CPP-[10]cyclacene, was constructed via the integration of [8]cycloparaphenylene ([8]CPP) into [10]cyclacene. Using the external electric field stimuli-responsiveness of [8]CPP-[10]cyclacene, directional charge transfer can be induced, resulting in the emergence of intriguing properties. The effects of the external electric field in three specific directions were explored, vertically in the [8]CPP unit (Fy), vertically in the [10]cyclacene unit (Fz), and horizontally along the double nanorings diameter (Fx). Interestingly, the external electric field vertically to the [10]cyclacene unit significantly enhanced the first hyperpolarizability (ßtot) compared to that vertically to the [8]CPP unit. Notably, [8]CPP-[10]cyclacene under Fx exhibited significantly larger the ßtot values (1.48 × 105 a.u.) than those of vertical Fy and Fz. This work opens up a wide range of nonlinear optics, making it a compelling area to explore in the field of carbon nanomaterials.

Trinuclear Cu-based covalent organic framework: π-conjugated framework regulating electron delocalization to promote photoreduction CO2.

Sunlight-driven CO2 reduction to value-added chemicals is an effective strategy to promote carbon recycling. The exploration of catalysts with efficient charge separation is crucially important for highly efficient CO2 photoreduction. In this work, the preparation of metal-cluster-based covalent organic framework (CuABD) integrated features from both metal organic frameworks (MOFs) and covalent organic frameworks (COFs) through the condensation of diamines and functionalized trinuclear copper clusters demonstrate a thoughtful design strategy. The reported yield of 1.3 mmol g-1 h-1 for formic acid (HCOOH) under simulated solar irradiation is impressive, surpassing the performance of many COF- and MOF-based catalysts previously reported. Compared to its isomorphic metal-free structure (named BDFTD) and bare trinuclear Cu cluster which present extremely poor catalytic activities, CuABD displays remarkably enhanced CO2 reduction activity. Experimental and theoretical investigations reveal that the efficient charge transfer between diamine monomer and cyclic trinuclear copper (I) units, and the electron delocalization of the π-conjugated framework are responsible for the appealing catalytic performance. In summary, the work presents a well-structured and scientifically sound exploration of a metal-cluster-based covalent organic framework for efficient CO2 reduction under sunlight.

Garnet Structure-Activated Warm White Light Phosphors Ca3Al2Ge3O12: Dy3+, Eu3+ with Ultrahigh Thermal Stability and Tunable Luminescence.

A series of Ca3Al2Ge3O12: xDy3+, yEu3+ phosphors were successfully prepared by the high-temperature solid-phase method. The phase and morphology of the phosphors were studied by means of Rietveld refinement and scanning electron microscopy. The results show that the phase is pure, and the crystal structure is the Ia3̅d space group. In the Ca3Al2Ge3O12: xDy3+ phosphors, using 380 nm excitation, phosphors showed blue (4F9/2 → 6H15/2) and yellow (4F9/2 → 6H13/2) emission peaks at 481 and 581 nm, respectively. In Ca3Al2Ge3O12: xDy3+, yEu3+ phosphors, the energy transfer was inferred by the spectrum overlap of Dy3+ and Eu3+, and the lifetime attenuation was analyzed from the perspective of dynamics; finally, the band gap structure of the phosphors was analyzed by combining diffuse reflection spectra with the first principle, and the energy transfer mechanism and luminescence mechanism were elaborated by combining theory and practice. The transition from blue white light to red light can be achieved by tuning the range of y in Ca3Al2Ge3O12: 0.015Dy3+, yEu3+. Wherein, when y = 0.07, phosphors, the chromaticity coordinate of warm white CIE is (0.3932, 0.3203), the color temperature is 3093 K, and the warm white light is synthesized. The thermal stability of the synthesized warm white phosphors is 90.1% (423 K), the thermal sensing factors are Samax = 5.51 × 10-4 K-1 (303 K) and Srmax = 0.0359% K-1 (303 K), and the actual quantum efficiency is IQE = 52.48%. These results prove that Ca3Al2Ge3O12: Dy3+, Eu3+ have good application prospects as single-component warm w-LED devices.

A novel single-phase color tunable LiYGeO4:Dy3+, Eu3+ phosphor exhibiting warm white light and excellent thermal stability.

LiYGeO4 phosphors doped with Dy3+ and Eu3+ ions were synthesized using the solid phase method, and their color characteristics were adjustable. The bandgap value of LiYGeO4 calculated by diffuse reflection data is very close to the theoretical value of 3.669 eV, indicating that LiYGeO4 is an ideal candidate for doped rare earth activated ions. The analysis of the emission spectra and fluorescence attenuation curves of Dy3+ and Eu3+ co-doped LiYGeO4 phosphors revealed a clear energy transfer process: energy transfer from Dy3+ to Eu3+. Analysis of emission spectra and fluorescence attenuation curves revealed a transfer of energy from Dy3+ to Eu3+. This transfer mechanism is attributed to the dipole-dipole interactions. In addition, by constantly adjusting the doping levels of Dy3+ and Eu3+, a warm white phosphor with a color temperature of 3881 K was obtained. Finally, the emission intensity of the LiYGeO4:0.015Dy3+,0.02Eu3+ phosphor at 423 K was 86%, indicating that the phosphor has excellent thermal stability and 40% internal quantum efficiency, which proves the potential application of the LiYGeO4 phosphor in white light-emitting diodes (w-LEDs).

Enhancing dye degradation using a novel cobalt metal-organic framework as a peroxymonosulfate activator.

Among transition metals, cobalt ions exhibit superior catalytic activity in the peroxymonosulfate (PMS) degradation of pollutants. However, practical application is hindered by their high rate of ion leaching and the propensity for particle reunion issues. In this study, a novel cobalt metal-organic framework catalyst, denoted as CUST-565 ([Co3(BTB)2(BIPY)2]·4.5H2O·DMA), was synthesized via a one-step solvothermal method. The obtained crystal was employed as a catalyst to activate PMS for degrading two pollutants, methyl orange (MO) and rhodamine B (RhB), in wastewater. The catalyst demonstrated efficacy in PMS, achieving 97% degradation of MO and 98% degradation of RhB within 30 min at an initial concentration of 20.0 mg L-1. Additionally, various factors affecting dye degradation, including PMS dosage, catalyst dosage, temperature, initial pH, and coexisting anions, were investigated. Radical quenching experiments confirmed the presence of sulfate radicals (SO4˙-), hydroxyl radicals (HO˙), superoxide radicals (O2˙-), and singlet oxygen (1O2) in the system. After four cycles, CUST-565 retained its ability to catalytically degrade approximately 80% of the pollutants. These observed stability and reusability properties, corroborated by a series of characterization analyses before and after use, suggest that CUST-565 exhibits reliable performance. This work contributes to the development of cobalt-PMS catalysts for efficiently degrading dyes in wastewater.

Terbium alginate encapsulated CsPbI3@Pb-MOF: a ratiometric fluorescent bead for detection and adsorption of Fe3.

Halide perovskite nanocrystals are innovative luminescent materials for fluorescent probes with high quantum yield and narrow emission bandwidth. However, the limited stability, single-signal response, and separation challenges obstruct their widespread use in water ion detection. Herein, a ratiometric fluorescence sensor based on terbium alginate gel beads (green fluorescent, namely Tb-AG) embedded with powdered CsPbI3@Pb-MOF (red fluorescent) was prepared for fluorescent determination and adsorption of Fe3+. Pb-MOF's protection notably enhances the water stability of CsPbI3, while the energy transfer between CsPbI3@Pb-MOF and Tb3+ elevates the optical performance of CsPbI3@Pb-MOF@Tb-AG. Significantly, Fe3+ markedly suppresses CsPbI3@Pb-MOF red fluorescence at 647 nm, while not noticeably affecting Tb-AG green emission at 528 nm. The sensor exhibited a strong linear response to Fe3+ concentrations ranging from 0 to 90 µM, with a detection limit of 0.44 µM and high selectivity. The CsPbI3@Pb-MOF@Tb-AG-based sensor has been effectively validated through its successful use in detecting Fe3+ in tap and river water samples. Furthermore, CsPbI3@Pb-MOF@Tb-AG demonstrates a notable adsorption capacity of 325.4 mg g-1 Fe3+. Finally, the mechanism of Fe3+ detection and adsorption was determined.

ZIF-derived sulfides with tremella-like core-shell structure for high performance supercapacitors.

Metal-organic frameworks (MOFs) have emerged as promising active electrode materials in supercapacitors for its controllable porous structure and excellent physio-chemical properties. However, the poor conductivities keep it from achieving its full capacitance potential, which greatly limits its practical application. Here, a facile pathway is reported to fabricate the GO/Ni2ZnS4@NiCo2S4 composite with large specific surface area and favorable electrical conductivity. Thanks to the novel tremella-like core-shell structure and high-efficient synergistic effects among multi-components, the designed GO/Ni2ZnS4@NiCo2S4 electrode shows a high specific capacitance of 2284 F/g at 1 A/g. Furthermore, the asymmetric supercapacitor fabricated by coupling GO/Ni2ZnS4@NiCo2S4 positive electrode with biological carbon negative electrode achieves a remarkable energy density of 120 Wh kg-1 at a power density of 750 W kg-1.

Tunable covalent benzo-heterocyclic rings constructed using two-dimensional conjugated polymers for visible-light-driven water splitting.

Developing highly efficient, stable, and cost-effective two-dimensional (2D) conjugated polymers (CPs) for overall water splitting (OWS) is critical for producing clean and renewable hydrogen energy, yet it remains a great challenge. Here, we designed eight 2D CPs through the topological assembly of diacetylene and benzene-derived molecular linkers that can offer active sites for hydrogen and oxygen evolution reactions, and explored their structural, electronic, optical, and photocatalytic OWS properties by performing first-principles computations. It is shown that incorporating benzo-heterocyclic rings into CPs can significantly modulate the electronic structures of CPs and broaden the spectral absorption, suitable for visible-light-driven OWS. Remarkably, through a range of screening criteria, including stability, electronic band structures, band edge alignments, and photocatalytic activity, we found that CP-4 based on diacetylene and benzotrifuran can spontaneously trigger the OWS in a neutral environment under its own light-induced bias, eliminating the need for sacrificial agents or cocatalysts. Specifically, the HER active site is primarily located at diacetylene moieties, while the OER active site is mainly concentrated on the benzo-heterocyclic rings. Moreover, the ideal STH efficiency for OWS on CP-4 was estimated to be 13.87%, highlighting its potential as a prospective photocatalyst for large-scale industrial OWS. Our findings open a door to the rational design of novel polymer photocatalysts for OWS.

Co-based MOF heterogeneous catalyst for the efficient degradation of organic dye via peroxymonosulfate activation.

In this study, a new cobalt-based metal-organic framework (JLNU-500), [Co2(OH)(PBA)(AIP)]·3DMA·0.75H2O (4-(pyridin-4-yl) benzoic acid (HPBA), 5-aminoisophthalic acid (H2AIP) and N,N-dimethylacetamide (DMA)), was fabricated using a solvothermal method. JLNU-500 has 3D network architecture with 1D nanopore channels. The prepared JLNU-500 can activate peroxymonosulfate (PMS) for Rhodamine B (RhB) dye decolorization. Interestingly, catalyst JLNU-500 exhibited high efficiency for PMS activation, and nearly 100% (above 99.8%) removal of RhB with a high concentration (50.0 mg L-1, 100 mL) was achieved within 6 min. The reaction rate constant of the JLNU-500/PMS system was 1.02 min-1 calculated based on the pseudo-first-order kinetics, which is higher than that of the other reported catalysts. Furthermore, the factors, which could influence PMS activation were also investigated, such as PMS dosage, catalyst dosage, pollutant RhB concentration, reaction temperature and solution pH. More importantly, the radical trapping experiments ferreted out that sulfate (SO4˙-) and hydroxyl (˙OH) radicals were the dominating oxidants in the removal of RhB. Moreover, the possible degradation mechanism was elucidated. This study provides new prospects for fabricating new MOFs that can potentially be employed for high-efficiency catalytic oxidation as heterogeneous catalysts.

Selective Encapsulation and Chiral Induction of C60 and C70 Fullerenes by Axially Chiral Porous Aromatic Cages.

Chiral induction has been an important topic in chemistry, not only for its relevance in understanding the mysterious phenomenon of spontaneous symmetry breaking in nature but also due to its critical implications in medicine and the chiral industry. The induced chirality of fullerenes by host-guest interactions has been rarely reported, mainly attributed to their chiral resistance from high symmetry and challenges in their accessibility. Herein, we report two new pairs of chiral porous aromatic cages (PAC), R-PAC-2, S-PAC-2 (with Br substituents) and R-PAC-3, S-PAC-3 (with CH3 substituents) enantiomers. PAC-2, rather than PAC-3, achieves fullerene encapsulation and selective binding of C70 over C60 in fullerene carbon soot. More significantly, the occurrence of chiral induction between R-PAC-2, S-PAC-2 and fullerenes is confirmed by single-crystal X-ray diffraction and the intense CD signal within the absorption region of fullerenes. DFT calculations reveal the contribution of electrostatic effects originating from face-to-face arene-fullerene interactions dominate C70 selectivity and elucidate the substituent effect on fullerene encapsulation. The disturbance from the differential interactions between fullerene and surrounding chiral cages on the intrinsic highly symmetric electronic structure of fullerene could be the primary reason accounting for the induced chirality of fullerene.

A Theoretical Study on the Underlying Factors of the Difference in Performance of Organic Solar Cells Based on ITIC and Its Isomers.

Recently, non-fullerene-based organic solar cells (OSCs) have made great breakthroughs, and small structural differences can have dramatic impacts on the power conversion efficiency (PCE). We take ITIC and its isomers as examples to study their effects on the performance of OSCs. ITIC and NFBDT only differed in the side chain position, and they were used as models with the same donor molecule, PBDB-T, to investigate the main reasons for the difference in their performance in terms of theoretical methods. In this work, a detailed comparative analysis of the electronic structure, absorption spectra, open circuit voltage and interfacial parameters of the ITIC and NFBDT systems was performed mainly by combining the density functional theory/time-dependent density functional theory and molecular dynamics simulations. The results showed that the lowest excited state of the ITIC molecule possessed a larger ∆q and more hybrid FE/CT states, and PBDB-T/ITIC had more charge separation paths as well as a larger kCS and smaller kCR. The reason for the performance difference between PBDB-T/ITIC and PBDB-T/NFBDT was elucidated, suggesting that ITIC is a superior acceptor based on a slight modulation of the side chain and providing a guiding direction for the design of superior-performing small molecule acceptor materials.