Cartilage wear patterns in severe osteoarthritis of the trapeziometacarpal joint: a quantitative analysis.

OBJECTIVE: The present quantitative study aimed to assess the three-dimensional (3-D) cartilage wear patterns of the first metacarpal and trapezium in the advanced stage of osteoarthritis (OA) and compare cartilage measurements with radiographic severity. DESIGN: Using 19 cadaveric trapeziometacarpal (TMC) joints, 3-D cartilage surface models of the first metacarpal and trapezium were created with a laser scanner, and 3-D bone surface model counterparts were similarly created after dissolving the cartilage. These two models were superimposed, and the interval distance on the articular surface as the cartilage thickness was measured. All measurements were obtained in categorized anatomic regions on the articular surface of the respective bone, and we analyzed the 3-D wear patterns on the entire cartilage surface. Furthermore, we compared measurements of cartilage thickness with radiographic OA severity according to the Eaton grading system using Pearson correlation coefficients (r). RESULTS: In the first metacarpal, the cartilage thickness declined volarly (the mean cartilage thickness of the volar region was 0.32 ± 0.16 mm, whereas that of the dorsal region was 0.53 ± 0.18 mm). Conversely, the cartilage evenly degenerated throughout the articular surface of the trapezium. Measurements of the categorized regions where cartilage thinning was remarkable exhibited statistical correlations with radiographic staging (r = -0.48 to -0.72). CONCLUSIONS: Our findings indicate that cartilage wear patterns differ between the first metacarpal and trapezium in the late stage of OA. There is a need for further studies on cartilage degeneration leading to symptomatic OA in the TMC joint.

In vivo three-dimensional kinematics of normal knees during different high-flexion activities.

AIMS: In Asia and the Middle-East, people often flex their knees deeply in order to perform activities of daily living. The purpose of this study was to investigate the 3D kinematics of normal knees during high-flexion activities. Our hypothesis was that the femorotibial rotation, varus-valgus angle, translations, and kinematic pathway of normal knees during high-flexion activities, varied according to activity. MATERIALS AND METHODS: We investigated the in vivo kinematics of eight normal knees in four male volunteers (mean age 41.8 years; 37 to 53) using 2D and 3D registration technique, and modelled the knees with a computer aided design program. Each subject squatted, kneeled, and sat cross-legged. We evaluated the femoral rotation and varus-valgus angle relative to the tibia and anteroposterior translation of the medial and lateral side, using the transepicodylar axis as our femoral reference relative to the perpendicular projection on to the tibial plateau. This method evaluates the femur medially from what has elsewhere been described as the extension facet centre, and differs from the method classically applied. RESULTS: During squatting and kneeling, the knees displayed femoral external rotation. When sitting cross-legged, femurs displayed internal rotation from 10° to 100°. From 100°, femoral external rotation was observed. No significant difference in varus-valgus angle was seen between squatting and kneeling, whereas a varus position was observed from 140° when sitting cross-legged. The measure kinematic pathway using our methodology found during squatting a medial pivoting pattern from 0° to 40° and bicondylar rollback from 40° to 150°. During kneeling, a medial pivot pattern was evident. When sitting cross-legged, a lateral pivot pattern was seen from 0° to 100°, and a medial pivot pattern beyond 100°. CONCLUSION: The kinematics of normal knees during high flexion are variable according to activity. Nevertheless, our study was limited to a small number of male patients using a different technique to report the kinematics than previous publications. Accordingly, caution should be observed in generalizing our findings. Cite this article: Bone Joint J 2018;100-B:50-5.

Altered bone density and stress distribution patterns in long-standing cubitus varus deformity and their effect during early osteoarthritis of the elbow.

OBJECTIVE: To quantify the bone density and stress distribution patterns in long-standing cubitus varus and clarify the effects of the deformity on bone density. DESIGN: We created three-dimensional computed tomography (CT) elbow models from 21 patients with long-standing cubitus varus deformities without advanced osteoarthritis (OA) and assessed the deformity by superimposing the affected humerus onto a mirror-image of the contralateral normal. Elbows were divided into 13 regions before measuring the bone density of each region and comparing the percentage of high-density volume (%HDV) between affected and normal sides. We constructed finite element models and quantitatively analyzed stress distribution. RESULTS: Average degrees of deformities were 20.1° of varus, 6.4° of extension, and 12.7° of internal rotation. The medial side of the affected humerus and ulna, Anteromedial trochlea (P < 0.001), Medial coronoid (P = 0.004), and Medial olecranon (P = 0.049) had significantly higher %HDVs than their normal counterparts. Conversely, %HDVs on the affected lateral side, Capitellum (P < 0.001), Anterolateral trochlea (P = 0.010), Posterolateral trochlea (P < 0.001), Lateral coronoid (P = 0.007), and Lateral olecranon (P < 0.001) were significantly lower than the normal side. The affected radial head %HDVs at Anterolateral and Posteromedial quadrants were high (P = 0.007) and low (P = 0.007), respectively. The bone density distribution coincided with stress distribution patterns revealed by finite element analysis (FEA), except in the lateral region influenced by forearm rotation. CONCLUSIONS: Repetitive stress on the medial elbow may alter bone density distribution patterns, probably presenting from early stage of OA.

Arthroscopic debridement in the treatment of patients with osteoarthritis of the elbow, based on computer simulation.

We retrospectively assessed the value of identifying impinging osteophytes using dynamic computer simulation of CT scans of the elbow in assisting their arthroscopic removal in patients with osteoarthritis of the elbow. A total of 20 patients were treated (19 men and one woman, mean age 38 years (19 to 55)) and followed for a mean of 25 months (24 to 29). We located the impinging osteophytes dynamically using computerised three-dimensional models of the elbow based on CT data in three positions of flexion of the elbow. These were then removed arthroscopically and a capsular release was performed. The mean loss of extension improved from 23° (10° to 45°) pre-operatively to 9° (0° to 25°) post-operatively, and the mean flexion improved from 121° (80° to 140°) pre-operatively to 130° (110° to 145°) post-operatively. The mean Mayo Elbow Performance Score improved from 62 (30 to 85) to 95 (70 to 100) post-operatively. All patients had pain in the elbow pre-operatively which disappeared or decreased post-operatively. According to their Mayo scores, 14 patients had an excellent clinical outcome and six a good outcome; 15 were very satisfied and five were satisfied with their post-operative outcome. We recommend this technique in the surgical management of patients with osteoarthritis of the elbow.

A comparison of 3-D computed tomography versus 2-D radiography measurements of ulnar variance and ulnolunate distance during forearm rotation.

Positive ulnar variance is associated with ulnar impaction syndrome and ulnar variance is reported to increase with pronation. However, radiographic measurement can be affected markedly by the incident angle of the X-ray beam. We performed three-dimensional (3-D) computed tomography measurements of ulnar variance and ulnolunate distance during forearm rotation and compared these with plain radiographic measurements in 15 healthy wrists. From supination to pronation, ulnar variance increased in all cases on the radiographs; mean ulnar variance increased significantly and mean ulnolunate distance decreased significantly. However on 3-D imaging, ulna variance decreased in 12 cases on moving into pronation and increased in three cases; neither the mean ulnar variance nor mean ulnolunate distance changed significantly. Our results suggest that the forearm position in which ulnar variance increased varies among individuals. This may explain why some patients with ulnar impaction syndrome complain of wrist pain exacerbated by forearm supination. It also suggests that standard radiographic assessments of ulnar variance are unreliable.

Comparison of three dimensional and radiographic measurements in the analysis of distal radius malunion.

To estimate the accuracy of radiographic deformity evaluation for distal radius malunion, we compared the results obtained from radiographic measurements (palmar tilt, radial angle, and ulnar variance) with those from the three-dimensional (3D) method using computer bone models in 20 dorsally tilted malunions. Dorsal tilt deformity, radial tilt deformity, and shortening deformity were calculated using the unaffected side as a reference. The 3D method showed a slightly lower value for dorsal tilt deformity than the radiographic evaluation, but the difference was < 10° in all cases. In patients with dorsal tilt ≥ 40°, notable differences in radial tilt evaluation were observed between the two methods compared with patients with less dorsal tilt. The 3D shortening showed positive correlations with radiographic evaluation, but a discrepancy of ≥ 2 mm was observed in eight cases. Palmar tilt is reliable for surgical planning, but radial angle and ulnar variance may be less accurate than previously thought.

Three-dimensional deformity analysis of malunited distal radius fractures and their influence on wrist and forearm motion.

Little information exists about three-dimensional (3-D) deformity patterns of malunited distal radius fractures including axial deformity. The current study aimed to clarify the 3-D deformity pattern of malunited distal radius fractures and reveal the influence of osseous deformities, including axial rotation deformity, on wrist and forearm motion. The deformity of 20 dorsally tilted malunions were evaluated using 3-D computer models created from CT data, and correlations between deformity components and range of motion were assessed. The 3-D deformity analysis showed that axial malalignment in pronation, which showed a correlation with the degree of radial tilt deformity, was very common. A radial tilt deformity of > 5° was observed in only 45% of cases. Although the range of wrist flexion and extension showed a correlation with dorsal tilt deformity, the range of forearm pronation and supination did not correlate with distal radius deformities.

Three-dimensional distribution of articular cartilage thickness in the elderly talus and calcaneus analyzing the subchondral bone plate density.

OBJECTIVE: To unveil the three-dimensional (3D) distribution of talocrural and posterior subtalar articular cartilage thickness in the elderly cadavers using 3D computed tomography (CT) and a 3D-digitizer and to evaluate the relationship between subchondral bone plate density and the overlying cartilage thickness. DESIGN: Sixteen tali and 16 calcanei from eight cadavers were scanned with 3D-CT to create bone surface models, and with a 3D-digitizer to make cartilage surface models. These two surface models were merged using surface registration method. Articular cartilage thickness was evaluated as the distance between the two models, and the distribution was mapped. The anatomic cartilage thickness of five tali and five calcanei was compared with the distance between the cartilage and bone surface models to calculate optimum threshold for extracting the subchondral bone plate. Generalized estimating equations were used for comparison and measurement errors. Canonical correlation analysis was performed to determine the strength of association between subchondral bone plate threshold and cartilage thickness. RESULTS: The talar-subtalar articular cartilage tended to be the thickest of the three joints. In the talocrural joint, the anterior region was the thinnest, and increasing cartilage thickness was seen toward the posterior. In the talar-subtalar joint, the central region was the thickest. Mean measurement errors were 0.059±0.066 mm, 0.038±0.040 mm, and 0.018±0.065 mm in the talocrural, talar-subtalar, and calcaneal-subtalar joints, respectively. The canonical correlation coefficient was 0.995 (P<0.001). CONCLUSIONS: The articular cartilage thickness was distributed in the elderly hindfoot. The subchondral bone plate density was significantly correlated with the anatomic cartilage thickness.

Evaluation of translation in the normal and dysplastic hip using three-dimensional magnetic resonance imaging and voxel-based registration.

OBJECTIVE: To elucidate in vivo hip instability by comparing normal hips to hips with acetabular dysplasia by evaluating three-dimensional (3D) translations of the femoral head center (FHC) at different hip positions using magnetic resonance imaging (MRI). DESIGN: Forty normal hips and 22 dysplastic female hips were examined. MRI was performed at four different positions bilaterally: neutral, 45° of flexion, 15° of extension, and the Patrick position. Femoral and pelvic bones were separately extracted at the neutral position and superimposed over the images of each different position using voxel-based registration. The distance between the acetabular center and FHC at neutral position was defined as 3D-migration. The distance between FHC at neutral position and that at each different position was defined as 3D-translation. Two-way repeated measures analysis of variance was performed to consider the dependency between right and left-side data, and multiple linear regression analyses were performed to assess independent relationships. RESULTS: The center-edge (CE) angle was the determinant for 3D-migration (ß=-0.415, P=0.001), and there was a statistical significant difference in 3D-migration between normal female hips and dysplastic hips (P=0.047). From neutral to the Patrick position, the FHC of normal and dysplastic hips translated postero-infero-medially by 1.12±0.39mm (0.45-1.85mm) and 1.97±0.84mm (0.95-4.34mm), respectively, and the difference between the groups was statistically significant (P=0.005). CE angle was the determinant for 3D-translation from neutral to the Patrick position (ß=-0.730, P<0.001). The average root mean square error in 3D-translation was 0.172mm and 0.193mm for intra- and interobserver reproducibility, respectively. CONCLUSIONS: Hip instability was increased in proportion to the severity of acetabular dysplasia. A 3D MRI voxel-based registration technique can show in vivo morphology and kinematics of the native hip without exposure to radioactivity.

Three-dimensional distribution of articular cartilage thickness in the elderly cadaveric acetabulum: a new method using three-dimensional digitizer and CT.

OBJECTIVE: The aim of this study was to evaluate the three-dimensional (3D) distribution of the acetabular articular cartilage thickness in cadaveric elderly individuals, measured using a new method with a 3D-digitizer and computed tomography (CT) and to validate this method using a thresholding technique. DESIGN: Twenty cadaveric hemipelves without fracture, previous hip surgery, or macroscopic degenerative changes were digitized by a 3D-digitizer to make 3D cartilage surface models, and scanned by 3D-CT to create 3D bone surface models. These two surface models were then merged using a surface registration method. Acetabular articular cartilage thickness was evaluated as the distance between the two surface models, and the distribution was mapped. Tests for accuracy and reproducibility were performed by comparing the cartilage thickness of five human femoral heads measured by stereomicroscopy with the distance between the cartilage and bone surface models. RESULTS: The superolateral cartilage tended to be the thickest in all acetabula. The smallest category (0-0.5 mm) of articular cartilage thickness existed at the posteroinferior lunate surface. In this new method, the mean measurement error was 0.018+/-0.044 mm for the average optimum threshold and the intraclass correlation coefficients were 0.99 in surface registration and 0.94 in data acquisition for reproducibility, indicating high accuracy and reproducibility. CONCLUSIONS: The proposed method for measuring articular cartilage using a 3D-digitizer and 3D-CT was accurate and reproducible. In the elderly individuals, acetabular articular cartilage tended to be thicker in the superolateral area and there was the thinnest category (0-0.5 mm) on the posteroinferior lunate surface of the acetabulum. The contour generated along 480 Hounsfield units (HU) was closest to the subchondral bone contour in the elderly hip.

Residual of 17beta-estradiol in digestion liquid generated from a biogas plant using livestock waste.

A biogas plant using livestock waste in which a methane fermentation process is applied is a useful facility for generating energy. The digestion liquid generated from the biogas plant as a residue has high potential for use as a crop fertilizer. However, high-density estrogens such as 17beta-estradiol (E2) are included in livestock waste, and there is little information on the behavior of E2 in the digestion liquid. In this study, a survey of E2 concentration at each process in a biogas plant using livestock waste was carried out. In addition, the efficiencies of E2 removal from the digestion liquid by activated carbon adsorption and soil infiltration were examined. The total concentration of E2 in raw livestock waste was reduced to 2 microg/l after treatment, and the removal efficiency of E2 was about 80% for the plant. The methane fermentation process is important not only for the generation of methane but also for the removal of E2. The proportion of E2 conjugates comprising the total E2 concentration was 10% or less in all treated samples. In the plant, there is no likelihood of an increase in estrogen activity by the cleaving of E2 conjugates. By carrying out activated carbon adsorption to remove E2 from the digestion liquid, a large portion of E2 was removed from the digestion liquid, but an E2 concentration of 0.5 microg/l still remained in the treated digestion liquid. In contrast, it was possible to purify the digestion liquid to an E2 concentration of less than 0.002-0.011 microg/l by soil infiltration. It is thus possible to utilize the digestion liquid as a fertilizer without causing aquatic environmental pollution, but factors such as application rate, soil characteristics, and the E2 concentration of digestion liquid should be considered first.

[Short-term outcome of extracardiac lateral tunnel using the atrial free wall and autologous pericardium].

BACKGROUND: Several modifications to the original Fontan procedure have been proposed in order to decrease postoperative morbidity. Lateral tunnel and extracardiac total cavo-pulmonary connection are 2 such modifications. PATIENTS: Between August 2005 and December 2005, the extracardiac lateral tunnel procedure was performed in 5 patients. The age at operation ranged from 19 to 59 months (median 24 months) and the weight ranged from 9.2 to 16.1 kg (median 11.4 kg). RESULTS: There was no mortality. The mean operation time was 466 +/-118 minutes. The mean cardiopulmonary bypass time was 198 +/- 61 minutes. The mean durations of intubation, intensive care unit stay, drainage tube use, and hospital stay were 1 +/- 1, 7 +/- 3, 12 +/- 5 and 30 +/- 2 days, respectively. Postoperative catheterization findings demonstrated that the mean superior venous caval pressure, inferior venous caval pressure, ventricular volume and ventricular ejection fraction were 10.0 +/- 1.4 mmHg, 11.0 +/- 2.4 mmHg, 140 +/- 47% of normal and 58.0 +/- 6.8% , respectively. CONCLUSIONS: The short-term results of the extracardiac lateral tunnel compared favorably with the results of different types of Fontan operation. In addition this procedure has the potential for growth and anticoagulation therapy is unnecessary.

Morphological analysis of the femoral trochlea in patients with recurrent dislocation of the patella using three-dimensional computer models.

We investigated the three-dimensional morphological differences of the articular surface of the femoral trochlea in patients with recurrent dislocation of the patella and a normal control group using three-dimensional computer models. There were 12 patients (12 knees) and ten control subjects (ten knees). Three-dimensional computer models of the femur, including the articular cartilage, were created. Evaluation was performed on the shape of the articular surface, focused on its convexity, and the proximal and mediolateral distribution of the articular cartilage of the femoral trochlea. The extent of any convexity, and the proximal distribution of the articular cartilage, expressed as the height, were shown by the angles about the transepicondylar axis. The mediolateral distribution of the articular cartilage was assessed by the location of the medial and lateral borders of the articular cartilage. The mean extent of convexity was 24.9 degrees sd 6.7 degrees for patients and 11.9 degrees sd 3.6 degrees for the control group (p < 0.001). The mean height of the articular cartilage was 91.3 degrees sd 8.3 degrees for the patients and 83.3 degrees sd 7.7 degrees for the control group (p = 0.03), suggesting a wider convex trochlea in the patients with recurrent dislocation of the patella caused by the proximally-extended convex area. The lateral border of the articular cartilage of the trochlea in the patients was more laterally located than in the control group. Our findings therefore quantitatively demonstrated differences in the shape and distribution of the articular cartilage on the femoral trochlea between patients with dislocation of the patella and normal subjects.

In vivo movement analysis of the patella using a three-dimensional computer model.

We used three-dimensional movement analysis by computer modelling of knee flexion from 0 degrees to 50 degrees in 14 knees in 12 patients with recurrent patellar dislocation and in 15 knees in ten normal control subjects to compare the in vivo three-dimensional movement of the patella. Flexion, tilt and spin of the patella were described in terms of rotation angles from 0 degrees . The location of the patella and the tibial tubercle were evaluated using parameters expressed as percentage patellar shift and percentage tubercle shift. Patellar inclination to the femur was also measured and patellofemoral contact was qualitatively and quantitatively analysed. The patients had greater values of spin from 20 degrees to 50 degrees , while there were no statistically significant differences in flexion and tilt. The patients also had greater percentage patellar shift from 0 degrees to 50 degrees , percentage tubercle shift at 0 degrees and 10 degrees and patellar inclination from 0 degrees to 50 degrees with a smaller oval-shaped contact area from 20 degrees to 50 degrees moving downwards on the lateral facet. Patellar movement analysis using a three-dimensional computer model is useful to clearly demonstrate differences between patients with recurrent dislocation of the patella and normal control subjects.

A three-dimensional quantitative analysis of carpal deformity in rheumatoid wrists.

We have measured the three-dimensional patterns of carpal deformity in 20 wrists in 20 rheumatoid patients in which the carpal bones were shifted ulnarwards on plain radiography. Three-dimensional bone models of the carpus and radius were created by computerised tomography with the wrist in the neutral position. The location of the centroids and rotational angle of each carpal bone relative to the radius were calculated and compared with those of ten normal wrists. In the radiocarpal joint, the proximal row was flexed and the centroids of all carpal bones translocated in an ulnar, proximal and volar direction with loss of congruity. In the midcarpal joint, the distal row was extended and congruity generally well preserved. These findings may facilitate more positive use of radiocarpal fusion alone for the deformed rheumatoid wrist.

Comparison between mobile-bearing and fixed-bearing knees in bilateral total knee replacements.

The purpose of this study was to compare mid-term results of mobile-bearing and fixed-bearing in bilateral total knee arthroplasty (TKA). Twenty-two patients underwent bilateral TKA with a mobile-bearing prosthesis (Rotaglide, Corin, UK) on one side and a fixed-bearing prosthesis (NexGen-CR, Zimmer, USA) on the other. There were 21 female patients, and in 18 patients, the diagnosis was rheumatoid arthritis. The average age was 59.6 (35-78) years. In all procedures, the posterior cruciate ligament was retained and patella re-surfaced. The average follow-up in the mobile-bearing group was 98 (79-107) months and 96 (79-107) months in the fixed-bearing group. At the final follow-up, the knee score was 91.8 points and 91.1 points, respectively, and the function score 65.5 points. The range of motion was similar in the two groups (1.1-106.9 degrees; 0.4-106.9 degrees). Five patients favoured the fixed-bearing prosthesis, but 16 found no difference. In patients with bilateral TKA, there was no difference in the short-term result between mobile-bearing and fixed-bearing prostheses.

Assessment of talus deformity by three-dimensional MRI in congenital clubfoot.

PURPOSE: To evaluate the morphological deformity of talus in congenital clubfoot by three-dimensional MRI. MATERIAL AND METHOD: Subjects were five patients (two male, three female, mean age 5 months) with unilateral congenital clubfoot. Magnetic resonance imaging was performed of both feet using 1.5 T magnet. Based on the resulting magnetic resonance imaging volume data, a three-dimensional surface bone model was reconstructed by the Marching Cubes method. The long axis of the reconstructed model was determined, and in relation to the standard planes including this axis, the degree of talar head and neck deviation, and the relative positioning of the talus and navicular in the talonavicular joint were compared between normal foot and clubfoot. RESULT: The talar head and neck angle in relation to the talus exhibited significant medial deviation in the clubfoot, but the degree of plantar deviation of the talar head and neck did not show significance. The navicular was located more medially in clubfoot than in normal foot. The volume of the total talar and of the ossific nucleus for the clubfoot was smaller than that for the normal foot. CONCLUSION: The assessment technique presented herein was shown to be useful in ascertaining the various pathological characteristics associated with clubfoot.

Effect of NaCl on lipid peroxidation-derived aldehyde, 4-hydroxy-2-nonenal formation in minced pork and beef.

Pork and beef containing NaCl were stored at 0 °C and changes in 4-hydroxynonenal (HNE) content were analyzed after 0, 3, 7 and 10 days. As an index of the lipid peroxidation level, malonaldehyde (MA) content was also analyzed. In pork, HNE content in samples with 2% NaCl increased (P<0.05) after 7 and 10 days of storage. In beef, HNE content in all samples increased during storage. The HNE content in samples with NaCl was higher than those of the control, after 7 and 10 days of storage, although the difference was not always significant. Judging from MA content, NaCl may act as a pro-oxidant in pork and beef. HNE may accumulate in pork and beef in which lipid peroxidation is progress.

Localization of bone morphogenetic protein-2 in human osteoarthritic cartilage and osteophyte.

OBJECTIVES: To examine the localization of bone morphogenetic protein (BMP)-2 mRNA and protein in human osteoarthritic (OA) articular cartilage and osteophyte. DESIGN: Five normal, four growing and 14 OA human cartilage samples, graded histomorphologically by Mankin Score, were studied by in situ hybridization and immunohistochemistry for the expression of BMP-2. RESULTS: BMP-2 mRNA was present in chondrocytes in neonatal growing articular cartilage, but was scarcely present in normal adult articular cartilage. In OA articular cartilage, BMP-2 mRNA and protein were detected in both clustering and individual chondrocytes in moderately or severely damaged OA cartilage. In moderately damaged OA cartilage, BMP-2 mRNA was localized in both upper and middle zone chondrocytes, but was not detected in deep layer chondrocytes. In severely damaged OA cartilage, cellular localization of BMP-2 mRNA was extended to the deep zone. In the area of osteophyte formation, BMP-2 mRNA was intensely localized in fibroblastic mesenchymal cells, fibrochondrocytes, chondrocytes and osteoblasts in newly formed osteophytic tissue. The pattern of BMP-2/4 immunolocalization was associated with that of mRNA localization. CONCLUSIONS: BMP-2 mRNA and BMP-2/4 were detected in cells appearing in OA tissues. BMP-2 was localized in cells of degenerating cartilage as well as osteophytic tissue. Given the negative localization of BMP-2 in normal adult articular cartilage, BMP-2 might be involved in the regenerating and anabolic activities of OA cells, which respond to cartilage damage occurring in osteoarthritis.

Lipid peroxidation-derived cytotoxic aldehyde, 4-hydroxy-2-nonenal in smoked pork.

The contents of 4-Hydroxy-2-nonenal (HNE), cytotoxic aldehyde, in smoked meat products (ham, bacon and sausage) were analyzed. All the samples analyzed contained HNE, although large differences in the contents between the different samples were observed. In one lot of ham (H1) and wiener sausage (WS1) a high level in HNE was observed. The changes of HNE contents of pork meats containing 0, 0.1, 0.5 and 1% Sugi wood vinegar (SWV) stored at 0 °C were also analyzed for 7 days. As an index of lipid peroxidation level, malonaldehyde (MA) contents were also analyzed in these samples. After 7 days of storage, HNE was detected only in pork meats containing 1% SWV and the level was similar to those of H1 and WS1. Judging from MA contents, SWV may act as a pro-oxidant in pork meats and HNE may accumulate in pork in which lipid peroxidation is in progress.