ABSTRACT
BACKGROUND: Oral squamous cell carcinoma (OSCC), the predominant malignancy of the oral cavity, is characterized by high incidence and low survival rates. Emerging evidence suggests a link between circadian rhythm disruptions and cancer development. The circadian gene TIMELESS, known for its specific expression in various tumors, has not been extensively studied in the context of OSCC. This study aims to explore the influence of TIMELESS on OSCC, focusing on cell growth and metabolic alterations. METHODS: We analyzed TIMELESS expression in OSCC using western blot, immunohistochemistry, qRT-PCR, and data from The Cancer Genome Atlas (TCGA) and the Cancer Cell Line Encyclopedia (CCLE). The role of TIMELESS in OSCC was examined through clone formation, MTS, cell cycle, and EdU assays, alongside subcutaneous tumor growth experiments in nude mice. We also assessed the metabolic impact of TIMELESS by measuring glucose uptake, lactate production, oxygen consumption, and medium pH, and investigated its effect on key metabolic proteins including silent information regulator 1 (SIRT1), hexokinase 2 (HK2), pyruvate kinase isozyme type M2 (PKM2), recombinant lactate dehydrogenase A (LDHA) and glucose transporter-1 (GLUT1). RESULTS: Elevated TIMELESS expression in OSCC tissues and cell lines was observed, correlating with reduced patient survival. TIMELESS overexpression enhanced OSCC cell proliferation, increased glycolytic activity (glucose uptake and lactate production), and suppressed oxidative phosphorylation (evidenced by reduced oxygen consumption and altered pH levels). Conversely, TIMELESS knockdown inhibited these cellular and metabolic processes, an effect mirrored by manipulating SIRT1 levels. Additionally, SIRT1 was positively associated with TIMELESS expression. The expression of SIRT1, HK2, PKM2, LDHA and GLUT1 increased with the overexpression of TIMELESS levels and decreased with the knockdown of TIMELESS. CONCLUSION: TIMELESS exacerbates OSCC progression by modulating cellular proliferation and metabolic pathways, specifically by enhancing glycolysis and reducing oxidative phosphorylation, largely mediated through the SIRT1 pathway. This highlights TIMELESS as a potential target for OSCC therapeutic strategies.
Subject(s)
Circadian Rhythm Signaling Peptides and Proteins , Glucose , Mouth Neoplasms , Squamous Cell Carcinoma of Head and Neck , Animals , Humans , Mice , Cell Line, Tumor , Cell Proliferation/genetics , Glucose/metabolism , Glucose Transporter Type 1 , Lactates , Mice, Nude , Mouth Neoplasms/genetics , Mouth Neoplasms/pathology , Sirtuin 1/metabolism , Squamous Cell Carcinoma of Head and Neck/genetics , Squamous Cell Carcinoma of Head and Neck/pathology , Circadian Rhythm Signaling Peptides and Proteins/geneticsABSTRACT
Objective: Periodontitis is a chronic inflammatory disease that causes loss of periodontal support tissue. Our objective was to investigate the mechanism by which METTL3-mediated N6-methyladenosine modification regulates the osteogenic differentiation through lncRNA in periodontal mesenchymal stem cells in patients with periodontitis (pPDLSCs). Material and Methods. We carried out a series of experiments, including methylated RNA immunoprecipitation-PCR, quantitative real-time polymerase chain reaction, and western blotting. The expressions of alkaline phosphatase (ALP), Runx2, Col1, Runx2 protein level, ALP staining, and Alizarin red staining were used to demonstrate the degree of osteogenic differentiation. Results: We found that METTL3 was the most significantly differentially expressed methylation-related enzyme in pPDLSCs and promoted osteogenic differentiation of pPDLSCs. METTL3 regulated the stability and expression of lncRNA CUTALP, while lncRNA CUTALP promoted osteogenic differentiation of pPDLSCs by inhibiting miR-30b-3p. At different time points of osteogenic differentiation, lncRNA CUTALP expression was positively correlated with Runx2, while miR-30b-3p showed the opposite pattern. The attenuated osteogenic differentiation induced by METTL3 knockdown was recovered by lncRNA CUTALP overexpression. The attenuated osteogenic differentiation induced by lncRNA CUTALP knockdown could be reversed by the miR-30b-3p inhibitor. Conclusions: In summary, METTL3/lncRNA CUTALP/miR-30b-3p/Runx2 is a regulatory network in the osteogenic differentiation of pPDLSCs.
ABSTRACT
Molecular dynamic simulations have been performed to explore contact behavior, microstructure evolution and sintering mechanism of Al-Ni dissimilar nanoparticles under high-velocity impact. We confirmed that the simulated contact stress, contact radius, and contact force under low-velocity impact are in good agreement with the predicted results of the Hertz model. However, with increasing the impact velocity, the simulated results gradually deviate from the predicted results of the Hertz model due to the elastic-plastic transition and atomic discrete structure. The normalized contact radius versus strain exhibits a weak dependence on nanosphere diameter. Below a critical velocity, there are very few HCP atoms in the nanospheres after thermal equilibrium. There are two different sintering mechanisms: under low-velocity impact, the sintering process relies mainly on the dislocation slip of Al nanospheres, while the dislocation slip of Ni nanospheres and the atomic diffusion of Al nanospheres predominate under high-velocity impact.
ABSTRACT
In this work, the nanoindentations on bilayer composite nanofilms composed of metal Ag and polymer PMMA were simulated using molecular dynamics. The effects of the thickness of Ag and PMMA on the elastic moduli of the composite films were analyzed from Hertz contact theory, dislocation evolution and atomic migration. The results show that the maximum penetration depth that the Hertz model could well describe is about 6 Å, and this limiting value is almost independent on the film thickness. The deformation mode of the Ag films gradually changes from bending mode to indentation mode with an increase in Ag thickness, which improves the elastic modulus of the composite films. The rule of mixtures could give a theoretical prediction about the elastic modulus of the composite film close to the nanoindentation, and Hertz theory could also be used as long as the thickness of Ag films exceeded a certain value. The introduction of a PMMA layer impedes the development of dislocation in the Ag layer and improves the elastic limit of the composite films. This work provides an important basis for experimentally measuring the overall elastic modulus of metal/polymer composite film based on nanoindentation or extracting the elastic modulus of metal film from the overall indentation response of the composite film.
ABSTRACT
China's marine satellite infrared radiometer SST remote sensing observations began relatively late. Thus, it is essential to evaluate and correct the SST observation data of the Ocean Color and Temperature Scanner (COCTS) onboard the China HY-1C satellite in the Southeast Asia seas. We conducted a quality assessment and correction work on the SST of the China COCTS/HY-1C in Southeast Asian seas based on multisource satellite SST data and temperature data measured by Argo buoys. The accuracy evaluation results of the COCTS SST indicated that the bias, Std, and RMSE of the daytime SST data for HY-1C were -0.73 °C, 1.38 °C, and 1.56 °C, respectively, while the bias, Std, and RMSE of the nighttime SST data were -0.95 °C, 1.57 °C, and 1.83 °C, respectively. The COCTS SST accuracy was significantly lower than that of other infrared radiometers. The effect of the COCTS SST zonal correction was most significant, with the Std and RMSE approaching 1 °C. After correction, the RMSE of the daytime SST and nighttime SST data decreased by 32.52% and 42.04%, respectively.
ABSTRACT
An abundance of early warning graphene-based nano-materials and sensors have been developed to avoid and prevent the critical fire risk of combustible materials. However, there are still some limitations that should be addressed, such as the black color, high-cost and single fire warning response of graphene-based fire warning materials. Herein, we report an unexpected montmorillonite (MMT)-based intelligent fire warning materials that have excellent fire cyclic warning performance and reliable flame retardancy. Combining phenyltriethoxysilane (PTES) molecules, poly(p-phenylene benzobisoxazole) nanofiber (PBONF), and layers of MMT to form a silane crosslinked 3D nanonetwork system, the homologous PTES decorated MMT-PBONF nanocomposites are designed and fabricated via a sol-gel process and low temperature self-assembly method. The optimized nanocomposite paper shows good mechanical flexibility (good recovery after kneading or bending process), high tensile strength of â¼81 MPa and good water resistance. Furthermore, the nanocomposite paper exhibits high-temperature flame resistance (almost unchanged structure and size after 120 s combustion), sensitive flame alarm response (â¼0.3 s response once exposure onto a flame), cyclic fire warning performance (>40 cycles), and adaptability to complex fire situations (several fire attack and evacuation scenarios), showing promising applications for monitoring the critical fire risk of combustible materials. Therefore, this work paves a rational way for design and fabrication of MMT-based smart fire warning materials that combine excellent flame shielding and sensitive fire alarm functions.
ABSTRACT
Background: Safe orthodontic tooth movement should be performed within the alveolar bone. The purpose of this study was to evaluate the morphology of the alveolar bone of incisors. Materials and methods: This retrospective study included pretreatment cone beam computed tomography of 120 patients with malocclusion. Patients were divided into 4 groups (Class I, Class II division 1, Class II division 2 and Class III) according to the subspinale-nasion-supramental (ANB) angle and occlusal relationship. The sagittal root positions, anterior and posterior root-cortical bone angles (AR-CA and PR-CA), root-crown ratios (RCR) and alveolar bone thickness were evaluated. Results: The sagittal root positions were mainly positioned against the labial cortical plate in the maxillary incisors of the Class II division 2 group and engaged by both the labial and palatal cortical plates in the mandibular incisors of the Class III group. The AR-CA was lower than that in the other groups (P < 0.01) in the maxillary incisors of the Class II division 2 group, and the AR-CA and PR-CA were lower than those in the other groups (P < 0.01) in the mandibular incisors of the Class III group. The alveolar thickness showed no significant difference between the Class II division 1 group and the Class I group (P > 0.05), the middle and lower anterior alveolar thickness (LAAT and MAAT) were lower than those in other groups (P < 0.01) in the maxillary incisors of the Class II division 2 group, and the alveolar thickness at the measurement sites of the middle and lower line were lower than those in other groups (P < 0.01) in the mandibular incisors of the Class III group. The RCR had a moderate positive correlation with the LAAT. Conclusion: Based on several limitations, this study found that maxillary incisor roots were at risk of penetrating the alveolar bone of Class II division 2 patients, and mandibular incisors may have a relatively small range of safe movement on both the labial and lingual sides of Class III patients during orthodontic treatment.
ABSTRACT
Periodontal ligament stem cells (PDLSCs) play important roles in orthodontic tooth movement (OTM) and can respond to mechanical stress. Our previous study demonstrated that periodontal ligament stem cells derived from periodontitis tissue (pPDLSCs) are more sensitive to static mechanical strain (SMS) than those derived from healthy tissue (hPDLSCs) and reported the long noncoding RNA (lncRNA) expression profiles of pPDLSCs exposed to SMS. An increasing number of lncRNAs have been reported by various studies to be associated with the osteogenic differentiation of mesenchymal stem cells. Many studies have demonstrated that the n6-methyladenosine (m6A) modification exerts important effects on lncRNA and mRNA regulation of cell behaviors. However, the regulatory effects of lncRNA and mRNA m6A modification on PDLSCs have not been studied. Therefore, we performed an m6A microarray assay with pPLDSCs and hPDLSCs exposed to 12% SMS and found that 143 lncRNAs and 739 mRNAs were differentially methylated. These RNAs were thought to be involved in multiple differentiation and inflammatory responses. Moreover, we found that METTL3, an essential protein in the m6A system, was expressed at lower levels in the strain-exposed pPDLSCs than in strain-exposed hPLDSCs, and METTL3 promoted the osteogenic differentiation of pPDLSCs.
ABSTRACT
OBJECTIVES: This study aimed to investigate the mechanism of N6-methyladenosine (m6A) in the osteogenic differentiation of periodontal ligament stem cells (PDLSCs) from periodontitis patients. METHODS: Differentially m6A-methylated lncRNA/mRNA profiles were detected by a m6A epitranscriptomic microarray. Bioinformatics analysis was performed by Gene Ontology and Kyoto Encyclopedia of Genes and Genomes pathway analysis. The transfection efficiency of the lentivirus was detected. The osteogenic activity of PDLSCs from periodontitis patients (PPDLSCs) was assessed. RESULTS: The microarray results showed that 275 lncRNAs and 1292 mRNAs were significantly differentially methylated between PPDLSCs and PDLSCs from healthy people. Among those lncRNAs, lncRNA4114 (transcript_ID: ENST00000444114) showed both reduced m6A methylation levels and expression levels in PPDLSCs. Further bioinformatics analysis predicted that the differentially methylated mRNAs were mainly involved in cell interaction, stem cell pluripotency, and osteogenic differentiation signals. Then, overexpression of methyltransferase like 3 (METTL3) promoted the osteogenic differentiation of PPDLSCs, while knocking down METTL3 showed an inhibitory effect. Furthermore, METTL3 overexpression promotes the stability of lncRNA4114 to upregulate the expression level. Moreover, lncRNA4114 overexpression promoted the osteogenic differentiation of PPDLSCs. CONCLUSION: METTL3 promotes the osteogenic differentiation of PPDLSCs by regulating the stability of lncRNA4114.
ABSTRACT
In deep resource exploitation, the coal seam and the strata are jointly loaded, forming a systematic combined structure that can have a significant effect on coalbed methane (CBM) development. Therefore, to understand the deformation and damage characteristics due to blasting load of the complex and real ground conditions, the 50 mm split Hopkinson pressure bar (SHPB) was used to study the dynamic performance and energy changes of coal-sandstone combination and sandstone-coal combination as inhomogeneous materials. In addition, high-speed photographic equipment was employed to determine the damage failure mechanisms. The results showed that the dynamic compressive strength and failure strains of two combinations showed polynomial relationships with increasing strain rates. The strain rate effects and likenesses of the two combinations' energy and energy rates were substantial. Furthermore, for the coal-sandstone combination, the initial damage fractures occurred at the end face near the bar, and at the interface for the sandstone-coal combination. Eventually, the improved constitutive model based on the ZWT was significantly consistent with the two combinations. The related theory can perform an effective and practical role in the mining of coal rocks under complex ground conditions for CBM development.
ABSTRACT
OBJECTIVE: To analysis the relationship between periodontitis (PD) and oral squamous cell carcinoma (OSCC) by bioinformatic analysis. MATERIALS AND METHODS: We analyzed the gene expression profiles of PD (GSE16134) from the Gene Expression Omnibus (GEO) database and OSCC samples from TCGA-HNSC (head and neck squamous cell carcinoma) and identified common differentially expressed genes (DEGs) in PD and OSCC. Then, functional annotation and signaling pathway enrichment, protein interaction network construction, and hub gene identification were performed. Subsequently, the function and signaling pathway enrichment of hub genes, miRNA interaction, and transcription factor interaction analyses were carried out. We analyzed GSE10334 and GSE30784 as validation datasets, and performed qRT-PCR experiments simultaneously for validation, and obtained 4 hub genes. Finally, immune infiltration analysis and clinical correlation analysis of 4 hub genes and related miRNAs were performed. RESULTS: We identified 31 DEGs (16 up-regulated and 15 down-regulated). Four hub genes were obtained by qRT-PCR and validation dataset analysis, including IL-1ß, CXCL8, MMP12, and MMP13. The expression levels of them were all significantly upregulated in both diseases. The functions of these genes focus on three areas: neutrophil chemotaxis, migration, and CXCR chemokine receptor binding. Key pathways include IL-17 signaling pathway, chemokine signaling pathway, and cytokine-cytokine receptor interactions pathway. Immune infiltration analysis showed that the expressions of 4 hub genes were closely related to a variety of immune cells. ROC curve analysis indicated that AUCs of 4 hub genes are all greater than 0.7, among which MMP12 and MMP13 were greater than 0.9. Kaplan-Meier survival analysis indicated that worse OS was strongly correlated with CXCL8 and MMP13 high-expression groups. MMP12 low-expression group was strongly associated with worse OS. The results of multivariate Cox regression analysis showed that age, N stage, CXCL8, MMP12, and MMP13 were independent prognostic factors for OS. We also identified 3 miRNAs, including hsa-miR-19b-3p, hsa-miR-181b-2-3p, and hsa-miR-495-3p, that were closely related to 4 hub genes. Hsa-miR-495-3p is closely related to the diagnosis and prognosis of OSCC. CONCLUSIONS: We identified 4 hub genes between PD and OSCC, including IL-1ß, CXCL8, MMP12, and MMP13. These genes may mediate the co-morbid process of PD and OSCC through inflammation-related pathways such as the IL-17 signaling pathway. It is worth noting that CXCL8, MMP12, and MMP13 have great significance in the diagnosis and prognosis of OSCC.
ABSTRACT
Single/multilayer graphene holds great promise in withstanding impact/penetration as ideal protective material. In this work, dynamic penetration behaviors of graphene has been explored using molecular dynamics simulations. The crashworthiness performance of graphene is contingent upon the number of layers and impact velocity. The variables including residual velocity and kinetic energy loss under different layers or different impact velocities have been monitored during the hypervelocity impact. Results show that there exists deviation from the continuum Recht-Ipson and Rosenberg-Dekel models, but these models tend to hold to reasonably predict the ballistic limit velocity of graphene with increasing layers. Besides, fractal theory has been introduced here and proven valid to quantitatively describe the fracture morphology. Furthermore, Forrestal-Warren rigid body model II still can well estimate the depth of penetration of multilayer graphene under a certain range of velocity impact. Finally, one modified model has been proposed to correlate the specific penetration energy with the number of layer and impact velocity.
ABSTRACT
Transition metal single-atom catalysts (SACs) have emerged as a research hotspot in CO2RRs. However, tuning the electronic configuration of a metal single-atom by employing new heteroatoms still remains a challenge. Herein, a carbon matrix loaded with a N and P co-coordinated Ni single-atom (denoted as Ni-NPC) was prepared for an efficient CO2RR. XANES and EXAFS were conducted to explore the coordination environment and charge distribution of the Ni-NPC catalyst. DFT calculations indicated that the Ni atom gained electrons from the P atom, and the Ni-NPC sample had a decreased energy barrier of +0.97 eV after doping with P atoms, which was favorable to overcome the limiting-step bottleneck for promoting CO2RR. Due to the rich Ni atomic active sites and superior P-doping effect, Ni-NPC exhibited a maximum FECO of 92% with a high current density of 22.6 mA cm-2 at -0.8V vs. RHE, which was far superior to those of NC, NPC and Ni-NC catalysts. Moreover, both the FECO and current density of the Ni-NPC catalyst remained stable for more than 16 h at -0.8 V vs. RHE, indicating a high stability for long-term CO2RR experiments.
ABSTRACT
The present paper addresses the problem of identification of microstructural, nanomechanical, and tribological properties of thin films of tantalum (Ta) and its compounds deposited on stainless steel substrates by direct current magnetron sputtering. The compositions of the obtained nanostructured films were determined by energy dispersive spectroscopy. Surface morphology was investigated using atomic force microscopy (AFM). The coatings were found to be homogeneous and have low roughness values (<10 nm). The values of microhardness and elastic modulus were obtained by means of nanoindentation. Elastic modulus values for all the coatings remained unchanged with different atomic percentage of tantalum in the films. The values of microhardness of the tantalum films were increased after incorporation of the oxygen and nitrogen atoms into the crystal lattice of the coatings. The coefficient of friction, CoF, was determined by the AFM method in the "sliding" and "plowing" modes. Deposition of the coatings on the substrates led to a decrease of CoF for the coating-substrate system compared to the substrates; thus, the final product utilizing such a coating will presumably have a longer service life. The tantalum nitride films were characterized by the smallest values of CoF and specific volumetric wear.
ABSTRACT
Molecular dynamics simulations have been performed to study the influence of five different heating rates on the sintering of aluminum nanoparticles with a diameter of 4-10 nm, mainly by exploring the atomic migration, radial distribution function (RDF), atomic average displacement, mean square displacement (MSD), radius ratio (i.e., the ratio of the neck radius to the particle radius), shrinkage rate, radius of gyration, sintering temperature and melting point. It is found that the displacement of surface atoms is always larger than the displacement of the internal atoms at the same heating rate during the sintering process. Radius ratio and shrinkage go through three stages as the temperature increases: (1) an abrupt increase after reaching the sintering temperature; (2) an almost plateau region within a wide temperature range; (3) finally a drastic increase again after reaching the melting point. Although the radius of gyration also goes through three stages, nonetheless the trend is opposite to radius ratio and shrinkage. For aluminum nanoparticles with the same diameter, at a lower heating rate, the atomic displacement, mean square displacement, radius ratio, shrinkage, and radius of gyration change more remarkably with increasing temperature. The lower heating rate and smaller nanoparticle diameter correspond to a lower sintering temperature and melting point.
ABSTRACT
Perovskite solar cells (PSCs) have achieved tremendous success within just a decade. This success is critically dependent upon compositional engineering, morphology control of perovskite layer, or contingent upon high-temperature annealed mesoporous TiO2, but quantitative analysis of the role of facile TiCl4 treatment and thickness control of the compact TiO2 layer has not been satisfactorily undertaken. Herein, we report the facile thickness control and post-treatment of the electron transport TiO2 layer to produce highly efficient planar PSCs. TiCl4 treatment of TiO2 layer could remove the surface trap and decrease the charge recombination in the prepared solar cells. Introduction of ethanol into the TiCl4 aqueous solution led to further improved open-circuit voltage and short-circuit current density of the related devices, thus giving rise to enhanced power conversion efficiency (PCE). After the optimal TiCl4 treatment, PCE of 16.42% was achieved for PSCs with TiCl4 aqueous solution-treated TiO2 and 19.24% for PSCs with TiCl4 aqueous/ethanol solution-treated TiO2, respectively. This work sheds light on the promising potential of simple planar PSCs without complicated compositional engineering and avoiding the deposition and optimization of the mesoporous scaffold layer.
Subject(s)
Calcium Compounds/chemistry , Oxides/chemistry , Solar Energy , Titanium/chemistry , Membranes, Artificial , Microscopy, Atomic ForceABSTRACT
In this work, ytterbium-erbium co-doped strontium molybdate (SrMoO4, SMO) nanophosphors (NPs), denoted as SMO:Yb/Er, have been successfully prepared. These NPs were then incorporated into TiO2 acceptor films in hybrid solar cells to enhance light harvesting by virtue of an up-conversion process where low energy photons can be converted into high energy photons through multi-photon processes. The results showed that the SMO:Yb/Er single crystal NPs are capable of turning near infrared photons into visible ones that can be easily captured by poly(thieno[3,4-b]-thiophene/benzodithiophene) (PTB7). The results indicate that the electron transfer rate at the PTB7/TiO2 donor/acceptor interface has been boosted sharply from 0.59 to 1.35 × 109 s-1. Consequently, a hybrid solar cell based on SMO:Yb/Er NP-doped TiO2/PTB7 delivers a high power conversion efficiency of up to 3.61%, thus leading to an efficiency enhancement of around 28% as compared to that of the neat PTB7/TiO2 counterpart (2.81%). This work demonstrates a promising approach to engineering efficient photovoltaic devices by taking advantage of the versatility of rare-earth ion doped oxides that function by modifying light in the solar spectrum.
ABSTRACT
In this work, thulium and ytterbium codoped gadolinium molybdate (Gd2(MoO4)3:Yb/Tm) nanophosphors (NPs) have been synthesized, followed by being incorporated into a photo-catalytic titania (TiO2) nanoparticle layer. In detail, morphology and phase identification of the prepared NPs are first characterized and then the up-conversion of the Gd2(MoO4)3:Yb/Tm NPs is studied. Electron transfer dynamics after interfacing with bare or NP-doped electron donor TiO2 and the corresponding photovoltaic performance of solar cells are explored. The results show that Gd2(MoO4)3:Yb/Tm NPs excited at 976 nm exhibit intense blue (460-498 nm) and weak red (627-669 nm) emissions. The lifetime of electron transfer is shortened from 817 to 316 ps after incorporating NPs and correspondingly the electron transfer rate outstrips by 3 times that of the bare TiO2. Consequently, a notable power conversion efficiency of 4.15% is achieved as compared to 3.17% of pure TiO2/PTB7. This work demonstrates that the co-doping of robust rare earth ions with different unique functions can widen the harvesting range of the solar spectrum, boost electron transfer rate and eventually strengthen device performance, without complicated interfacial and structural engineering.
ABSTRACT
Insufficient harvest of solar light energy is one of the obstacles for current photovoltaic devices to achieve high performance. Especially, conventional organic/inorganic hybrid solar cells (HSCs) based on PTB7 as p-type semiconductor can only utilize 400-800 nm solar spectrum. One effective strategy to overcome this obstacle is the introduction of up-conversion nanophosphors (NPs), in the virtue of utilizing the near infrared region (NIR) of solar radiation. Up-conversion can convert low-energy photons to high-energy ones through multi-photon processes, by which the solar spectrum is tailored to well match the absorptive domain of the absorber. Herein we incorporate erbium-ytterbium co-doped gadolinium molybdate (Gd2(MoO4)3, GMO), denoted as GMO:Yb/Er, into TiO2 acceptor film in HSCs to enhance the light harvest. Here Er3+ acts as activator while Yb-MoO4 2- is the joint sensitizer. Facts proved that the GMO:Yb/Er single crystal NPs are capable of turning NIR photons to visible photons that can be easily captured by PTB7. Studies on time-resolved photoluminescence demonstrate that electron transfer rate at the interface increases sharply from 0.65 to 1.42 × 109 s-1. As a result, the photoelectric conversion efficiency of the GMO:Yb/Er doped TiO2/PTB7 HSCs reach 3.67%, which is increased by around 25% compared to their neat PTB7/TiO2 counterparts (2.94%). This work may open a hopeful way to take the advantage of those conversional rare-earth ion doped oxides that function in tailoring solar light spectrum for optoelectronic applications.
ABSTRACT
Charge carrier transport in bulk heterojunction that is central to the device performance of solar cells is sensitively dependent on the energy level alignment of acceptor and donor. However, the effect of energy level regulation induced by nickel ions on the primary photoexcited electron transfer and the performance of P3HT/TiO2 hybrid solar cells remains being poorly understood and rarely studied. Here we demonstrate that the introduction of the versatile nickel ions into TiO2 nanocrystals can significantly elevate the conduction and valence band energy levels of the acceptor, thus resulting in a remarkable reduction of energy level offset between the conduction band of acceptor and lowest unoccupied molecular orbital of donor. By applying transient photoluminescence and femtosecond transient absorption spectroscopies, we demonstrate that the electron transfer becomes more competitive after incorporating nickel ions. In particular, the electron transfer life time is shortened from 30.2 to 16.7 ps, i.e., more than 44% faster than pure TiO2 acceptor, thus leading to a notable increase of power conversion efficiency in organic/inorganic hybrid solar cells. This work underscores the promising virtue of engineering the reduction of 'excess' energy offset to accelerate electron transport and demonstrates the potential of nickel ions in applications of solar energy conversion and photon detectors.