ABSTRACT
The development of a hydrogel material with a modified chemical structure of poly(vinyl alcohol) (PVA) and silk fibroin (SF) using glycidyl methacrylate (GMA) (denoted as PVA-g-GMA and SF-g-GMA) is an innovative approach in the field of biomaterials and meniscus tissue engineering in this study. The PVA-g-GMA/SF-g-GMA hydrogel was fabricated using different ratios of PVA-g-GMA to SF-g-GMA: 100/0, 75/25, 50/50, 25/75, and 0/100 (w/w of dry substances), using lithium phenyl (2,4,6-trimethylbenzoyl)phosphinate (LAP) as a free radical photoinitiator, for 10 min at a low ultraviolet (UV) intensity (365 nm, 6 mW/cm2). The mechanical properties, morphology, pore size, and biodegradability of the PVA-g-GMA/SF-g-GMA hydrogel were investigated. Finally, for clinical application, human chondrocyte cell lines (HCPCs) were mixed into PVA-g-GMA/SF-g-GMA solutions and fabricated into hydrogel to study the viability of live and dead cells and gene expression. The results indicate that as the SF-g-GMA content increased, the compressive modulus of the PVA-g-GMA/SF-g-GMA hydrogel dropped from approximately 173 to 11 kPa. The degradation rates of PVA-g-GMA/SF-g-GMA 100/0, 75/25, and 50/50 reached up to 15.61%, 17.23%, and 18.93% in 4 months, respectively. In all PVA-g-GMA/SF-g-GMA conditions on day 7, chondrocyte cell vitality exceeded 80%. The PVA-g-GMA/SF-g-GMA 75:25 and 50:50 hydrogels hold promise as a biomimetic biphasic injectable hydrogel for encapsulated augmentation, offering advantages in terms of rapid photocurability, tunable mechanical properties, favorable biological responses, and controlled degradation.
ABSTRACT
Cell-based therapy has become an achievable choice in regenerative medicines, particularly for musculoskeletal disorders. Adipose-derived stem cells (ASCs) are an outstanding resource because of their ability and functions. Nevertheless, the use of cells for treatment comes with difficulties in operation and safety. The immunological barrier is also a major limitation of cell therapy, which can lead to unexpected results. Cell-derived products, such as cell extracts, have gained a lot of attention to overcome these limitations. The goal of this study was to optimize the production of ASC-osteoblast extracts as well as their involvement in osteogenesis. The extracts were prepared using a freeze-thaw method with varying temperatures and durations. Overall, osteogenic-associated proteins and osteoinductive potential of the extracts prepared from the osteogenic-induced ASCs were assessed. Our results demonstrated that the freeze-thaw approach is practicable for cell extracts production, with minor differences in temperature and duration having no effect on protein concentration. The ASC-osteoblast extracts contain a significant level of essential specialized proteins that promote osteogenicity. Hence, the freeze-thaw method is applicable for extract preparation and ASC-osteoblast extracts may be beneficial as an optional facilitating biologics in bone anabolic treatment and bone regeneration.
Subject(s)
Adipose Tissue , Osteoblasts , Osteogenesis , Osteogenesis/drug effects , Osteogenesis/physiology , Osteoblasts/drug effects , Humans , Adipose Tissue/cytology , Stem Cells/drug effects , Cells, Cultured , Cell Differentiation/drug effects , Cell Extracts/pharmacology , AnimalsABSTRACT
Bony avulsion injuries of the triangular fibrocartilage complex (TFCC) caused by penetrating wrist trauma are rare, and there is limited literature available regarding their treatment. This case report describes a 54-year-old male who sustained a penetrating injury to his right wrist, resulting in "double lesion" of TFCC injury, which are ulnar avulsion (Palmer 1B) and radial avulsion (Palmer 1D) lesion with a sigmoid notch fracture. The patient underwent an arthroscopic examination and a novel arthroscopic technique for fixation and repair of the TFCC injury. The procedure involved debridement, repair of the dorsal radioulnar ligament bony avulsion, and fixation of the foveal bony avulsion of the TFCC. The patient's wrist was immobilized postoperatively, followed by gradual rehabilitation. At the final follow-up of six months, the patient demonstrated improved range of motion and functional outcomes. This case report highlights the successful use of arthroscopic techniques for the treatment of complex TFCC avulsion injuries resulting from penetrating wrist trauma.
ABSTRACT
Gelatin methacryloyl (GelMA) is an ideal bioink that is commonly used in bioprinting. GelMA is primarily acquired from mammalian sources; however, the required amount makes the market price extremely high. Since garbage overflow is currently a global issue, we hypothesized that fish scales left over from the seafood industry could be used to synthesize GelMA. Clinically, the utilization of fish products is more advantageous than those derived from mammals as they lower the possibility of disease transmission from mammals to humans and are permissible for practitioners of all major religions. In this study, we used gelatin extracted from fish scales and conventional GelMA synthesis methods to synthesize GelMA, then tested it at different concentrations in order to evaluated and compared the mechanical properties and cell responses. The fish scale GelMA had a printing accuracy of 97%, a swelling ratio of 482%, and a compressive strength of about 85 kPa at a 10% w/v GelMA concentration. Keratinocyte cells (HaCaT cells) were bioprinted with the GelMA bioink to assess cell viability and proliferation. After 72 h of culture, the number of cells increased by almost three-fold compared to 24 h, as indicated by many fluorescent cell nuclei. Based on this finding, it is possible to use fish scale GelMA bioink as a scaffold to support and enhance cell viability and proliferation. Therefore, we conclude that fish scale-based GelMA has the potential to be used as an alternative biomaterial for a wide range of biomedical applications.
ABSTRACT
Osteoarthritis (OA) is one of the most common musculoskeletal degenerative. OA treatments are aiming to slow down disease progression; however, lack of cartilage regeneration efficacy. Autologous chondrocyte implantation (ACI) is a promising cartilage-regeneration strategy that uses human articular chondrocytes (HACs) as cellular materials. However, the unreadiness of HACs from prolonged expansion, cellular senescence, and chondrogenic dedifferentiation occurred during conventional expansion, thus, minimizing the clinical efficacy of ACI. We aimed to examine the effects of a human platelet lysate (HPL) as an alternative human-derived HAC medium supplement to overcome the limitations of conventional expansion, and to explain the mechanism underlying the effects of HPL. During passages 2-4 (P2-P4), HPL significantly increased HAC proliferation capacities and upregulated chondrogenic markers. Simultaneously, HPL significantly reduced HAC senescence compared with conventional condition. HACs treated with LDN193189 exhibited a reduction in proliferation capacity and chondrogenic marker expression, whereas the HAC senescence increased slightly. These findings indicated involvement of BMP-2 signaling transduction in the growth-assistive, anti-senescent, and chondrogenic-inductive properties of HPL, which demonstrated its beneficial effects for application as HAC medium supplement to overcome current expansion limitations. Finally, our findings support the roles of platelets in platelet-rich plasma as a promising treatment for patients with OA.
Subject(s)
Cartilage, Articular , Chondrocytes , Humans , Chondrocytes/metabolism , Cartilage, Articular/metabolism , Phenotype , Signal Transduction , Cells, Cultured , Cell DifferentiationABSTRACT
Medium chain length polyhydroxyalkanoate (MCL-PHA), a biodegradable and biocompatible material, has a mechanical characteristic of hyper-elasticity, comparable to elastomeric material with similar properties to human tendon flexibility. These MCL-PHA properties gave rise to applying this material as an artificial tendon or ligament implant. In this study, the material was solution-casted in cylinder and rectangular shapes in the molds with the designated small holes. A portion of the torn human tendon was threaded into the holes as a suture to generate a composite tendon graft. The tensile testing of the three types of MCL-PHA/tendon composite shows that the cylinder material shape with the zigzag threaded three holes has the highest value of maximum tensile strength at 56 MPa, closing to the ultimate tendon tensile stress (50-100 MPa). Fibroblast cells collected from patients were employed as primary tendon cells for growing to attach to the surface of the MCL-PHA material to prove the concept of the composite tendon graft. The cells could attach and proliferate with substantial viability and generate collagen, leading to chondrogenic induction of tendon cells. An in vivo biocompatibility was also conducted in a rat subcutaneous model in comparison with medical-grade silicone. The MCL-PHA material was found to be biocompatible with the surrounding tissues. For surgical application, after the MCL-PHA material is decomposed, tendon cells should develop into an attached tendon and co-generated as a tendon graft.
Subject(s)
Polyhydroxyalkanoates , Humans , Rats , Animals , Tendons/surgery , Biocompatible Materials , Ligaments , CollagenABSTRACT
The standard treatment for distal radioulnar joint (DRUJ) instability involves repairing the triangular fibrocartilage complex (TFCC) and immobilizing the joint with a sugar tong slab, but this can cause elbow stiffness. To address this, a modified ulnar gutter slab was designed to enhance elbow mobility during immobilization. A prospective randomized controlled trial was conducted on 23 DRUJ instability patients who underwent arthroscopic TFCC repair. Two post-operative splinting techniques were compared: the modified ulnar gutter slab and the sugar tong slab. The assessment included the Disabilities of Arm, Shoulder, and Hand (DASH) score; elbow, forearm, and wrist range of motion (ROM); post-operative DRUJ stability; and complications. DASH scores at 4 and 6 weeks were not significantly different. However, the modified ulnar gutter slab improved elbow extension range of motion at 4 weeks (extension lag: 20.0 vs. 6.5 in the sugar tong group) (p = 0.011). Post-operative DRUJ stability was comparable between the two groups. Notably, one patient in the sugar tong slab group experienced complex regional pain syndrome (CRPS). The modified ulnar gutter slab offers a post-operative alternative after TFCC repair. It effectively immobilizes forearm and wrist motion while enhancing elbow mobility, potentially reducing post-operative elbow stiffness.
ABSTRACT
Aberrant autophagic activity is observed in osteoarthritic joints. Vitamin D was shown to alleviate not only osteoarthritis severity, but also autophagy process. However, the influence of vitamin D on autophagy in knee osteoarthritis (KOA) remains ambiguous. This study aimed to determine the effect of vitamin D2 on serum levels of autophagosome protein LC3A in patients with KOA and whether LC3A levels were correlated with serum 25-hydroxyvitamin D (25(OH)D) and clinical outcomes of patients with KOA. A total of 165 patients with KOA and 25 healthy controls were recruited. Vitamin D2 (ergocalciferol) was administered to patients with KOA at a weekly dosage of 40,000 IU. Serum LC3A, knee pain and functional scores, muscle strength, physical performance, and biochemical parameters were examined before and after 6 months of vitamin D2 supplementation. Serum LC3A levels were significantly higher in patients with KOA than healthy controls. In patients with KOA, vitamin D2 supplementation significantly decreased serum LC3A levels. Furthermore, baseline levels of serum LC3A were significantly associated with radiographic severity, pain and functional scores, total cholesterol, hs-CRP, IL-6, protein carbonyl, and serum 25(OH)D. After adjusting for established confounders, independent relationships among serum LC3A and radiographic severity, pain and functional scores, total cholesterol, hs-CRP, IL-6, protein carbonyl, and serum 25(OH)D were also observed. Vitamin D2 supplementation was shown to not only decrease serum levels of LC3A, inflammatory markers, as well as oxidative stress, but also improve muscle strength and physical performance in patients with KOA.
Subject(s)
Osteoarthritis, Knee , Vitamin D Deficiency , Humans , Osteoarthritis, Knee/drug therapy , C-Reactive Protein , Autophagosomes , Interleukin-6 , Vitamin D , Inflammation/drug therapy , Pain , Dietary Supplements , Physical Functional Performance , CholesterolABSTRACT
Several abnormal pathologies, such as inflammation or degenerative change, can be causes of ulnar-sided wrist pain. This study demonstrated bilateral accessory extensor carpi ulnaris found in a patient who presented with bilateral wrist pain. The patient was initially treated with all conventional methods but failed to improve. Following the operation by releasing the sixth extensor compartment, the pain was completely relieved. The Disabilities of the Arm, Shoulder, and Hand (DASH) score was remarkably improved and there was no limitation in daily living activities compared with preoperative status. We presented an uncommon condition of ulnar-sided wrist pain caused by bilateral accessory extensor carpi ulnaris which was successfully treated by releasing the extensor compartmental sheath without tendon resection.
ABSTRACT
BACKGROUND: In minor hand surgery, tourniquet is typically inflated to 250 mmHg. The pressure may be too high and cause unnecessary adverse effects. Limb occlusion pressure plus safety margin or recommended tourniquet pressure (RTP), has been reported as optimal pressure to provide bloodless field in limb surgeries. This study aimed to compare the RTP with the standard tourniquet pressure of 250 mmHg in minor hand surgery. METHODS: A double-blinded randomized control trial was conducted from July to December 2019 and June 2020 to May 2021. Patients were randomly assigned into two groups: RTP and 250 mmHg with 3:1 ratio allocation. The outcomes were measurement of cuff pressure reduction, time to develop of tourniquet pain and discomfort, pain score, discomfort score, motionless and bloodless of operative field determined by the surgeon's satisfaction. RESULTS: A total of 112 patients were included, 84 were in RTP and 28 were in 250 mmHg group. Mean of tourniquet pressure was significantly lower in the RTP group (228.3 ± 17.2 mmHg) (P < 0.001). Even though, time to develop pain was not significantly different, the RTP group reported significantly less pain and discomfort, according to the pain score (P = 0.02) and discomfort score (P = 0.017). The RTP group provided better motionless field, while both groups equally created a bloodless field. CONCLUSION: The RTP significantly reduced tourniquet related pain and discomfort during minor hand surgeries. It provided better motionless operative field and adequate bloodless field. Therefore, the RTP should be considered as optimal tourniquet pressure for minor hand surgeries. TRIAL REGISTRATION: TCTR20210519001 (retrospectively registered). LEVEL OF EVIDENCE: I.
Subject(s)
Hand , Tourniquets , Humans , Hand/surgery , Tourniquets/adverse effects , Upper Extremity , Pain/etiology , PressureABSTRACT
Injectable hydrogels can be applied to treat damaged meniscus in minimally invasive conditions. Generally, injectable hydrogels can be prepared from various polymers such as polycaprolactone (PCL) and poly (N-isopropylacrylamide) (PNIPAAm). Poly (ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer-diacrylate (PEO-PPO-PEO-DA) is an interesting polymer due to its biodegradability and can be prepared as water-insoluble injectable hydrogel after curing with UV light at low intensity. However, mechanical and cell adhesion properties are not optimal for these hydrogels. For the improved mechanical performance of the injectable hydrogel, cellulose nanofiber (CNF) extracted from cassava pulp was used as a reinforcing filler in this study. In addition, gelatin methacrylate (GelMA), the denatured form of collagen was used to enhance cell adhesion. PEO-PPO-PEO-DA/CNF/GelMA injectable hydrogels were prepared with 2-hydroxy-1-(4-(hydroxy ethoxy) phenyl)-2-methyl-1-propanone as a photoinitiator and then cured with UV light, 365 nm at 6 mW/cm2. Physicochemical characteristics of the hydrogels and hydrogels with CNF were studied in detail including morphology characterization, pore size diameter, porosity, mechanical properties, water uptake, and swelling. In addition, cell viability was also studied. CNF-reinforced injectable hydrogels were successfully prepared after curing with UV light within 10 min with a thickness of 2 mm. CNF significantly improved the mechanical characteristics of injectable hydrogels. The incorporation of GelMA into the injectable hydrogels improved the viability of human cartilage stem/progenitor cells. At optimum formulation, 12%PEO-PPO-PEO-DA/0.5%CNF/3%GelMA injectable hydrogels significantly promoted cell viability (>80%) and also showed good physicochemical properties, which met tissue engineering requirements. In summary, this work shows that these novel injectable hydrogels have the potential for meniscus tissue engineering.
ABSTRACT
BACKGROUND: There are several surgical methods of lumbar discectomy which provide the similar clinical outcomes. There is no clear evidence for how to select the procedures. To better understand the patient's opinion and decision process in the selection of surgical methods between microscopic lumbar discectomy (MLD) and endoscopic lumbar discectomy (ELD). METHODS: A cross-sectional survey study. Summary information sheet was created by reviewing the comparative literatures, and tested for quality and bias. Participants read the summary information sheet then were asked to complete the anonymous questionnaire. RESULTS: Seventy-six patients (71%) of patients who had no experience in lumbar discectomy selected ELD while 31 patients (29%) selected MLD. There were significant differences of score between patients who selected MLD and ELD in this group for wound size, anesthetic method, operative time, blood loss and length of stay (P< 0.05). In patients who had experience in discectomy group, 22 patients (76%) who underwent MLD still selected MLD if they could select surgical methods again for themselves, while 24 patients (96%) who underwent ELD still selected ELD if they could select again. The most important factor in patients who selected MLD was outcomes of treatment. The most important factor in patients who selected ELD was wound size. There were significant differences of scores between patients who selected MLD and ELD in this group for wound size, anesthetic method, operative time, complication, cost and length of stay (P< 0.05). CONCLUSIONS: About two thirds of the participants preferred ELD after reading the summary evidence information. The most important factor in MLD group was outcomes of treatment while the most important factor in ELD group was wound size.
Subject(s)
Diskectomy, Percutaneous , Intervertebral Disc Displacement , Humans , Cross-Sectional Studies , Patient Preference , Intervertebral Disc Displacement/surgery , Lumbar Vertebrae/surgery , Diskectomy/adverse effects , Endoscopy/methods , Treatment Outcome , Retrospective StudiesABSTRACT
Soft tissue defects around the ankle are common and must be covered with thin and pliable flaps. A regional flap, particularly from the dorsum of the foot was considered ideal. A neurocutaneous flap, based on the superficial peroneal nerve (SPN) and its branches was designed as a proximally based flap via cadaveric dissection. This study aimed to demonstrate the vascularity and characteristics of the superficial peroneal neurocutaneous (SPNC) flap. The SPNC flap was created in 11 lower limbs (seven cadavers) using a proximally based design. The skin flap was dissected at the dorsum of the foot, followed by injection of diluted methylene blue through the anterior tibial artery, to visualize the vascularity. The flap pedicle above the anterior ankle joint line was dissected along the SPN for anatomical study of perforating branches, paraneural vessels, and flap territory. The mean distances of the most proximal perforating branches were 1.51 ± 1.48 cm from the anterior ankle joint line, and 5.12 ± 1.78 cm from the lateral malleolus. The mean distances of the most distal perforating branches were 2.75 ± 1.54 cm from the anterior ankle joint line, and 5.90 ± 1.81 cm from the lateral malleolus. The mean number of perforating branches was 3.73 ± 1.49. The mean flap territories were 5.51 ± 0.59 cm in length, and 7.15 ± 0.64 cm in width. The SPNC flap is an alternative method for soft tissue reconstruction around the ankle with a proximally based flap design. The antegrade flow has been shown to offer effective vascularity in flaps prepared via cadaveric dissection.
Subject(s)
Plastic Surgery Procedures , Soft Tissue Injuries , Humans , Skin Transplantation , Soft Tissue Injuries/surgery , Surgical Flaps/blood supply , CadaverABSTRACT
Infrapatellar fat pad (IFP)/ synovial fibrosis is closely associated with the clinical symptoms of joint pain and stiffness, which contribute to locomotor restriction in osteoarthritis (OA) patients. Hence, this study was designed to gain insight on whether losartan, a selective angiotensin II type 1 receptor (AT1R) antagonist, has therapeutic benefit to reverse IFP/synovial fibrosis and secondarily to attenuate pain behavior. In male Wistar rats with monoiodoacetic acid (MIA)-induced IFP/synovial fibrosis, a possible role for increased AT1R expression in the pathogenesis of IFP/synovial fibrosis was assessed over an 8-week period. Pain behavior comprised static weight bearing and von Frey paw withdrawal thresholds (PWTs), which were assessed once or twice weekly, respectively. Groups of MIA-rats received oral losartan (30-mg/kg; n = 8 or 100-mg/kg; n = 9) or vehicle (n = 9) for 28-days according to a prevention protocol. Animals were euthanized on day 28 and various tissues (IFP/synovium, cartilage and lumbar dorsal root ganglia (DRGs)) were collected for histological, immunohistochemical and western blot analyses. Administration of once-daily losartan for 28-days dose-dependently attenuated the development of static weight bearing. This was accompanied by reduced IFP/synovial fibrosis and suppression of TGF-ß1 expression. Chronic treatment of MIA-rats with losartan had an anti-fibrotic effect and it attenuated pain behavior in this animal model.
Subject(s)
Osteoarthritis, Knee , Osteoarthritis , Rats , Male , Animals , Losartan/pharmacology , Losartan/therapeutic use , Rats, Wistar , Pain/metabolism , Osteoarthritis/metabolism , Adipose Tissue/metabolism , Fibrosis , Iodoacetic Acid/toxicity , Iodoacetic Acid/metabolism , Angiotensin II Type 1 Receptor Blockers/adverse effects , Osteoarthritis, Knee/pathologyABSTRACT
Objectives: The growth and differentiation factor 5 (GDF5) gene plays a significant role in facilitating chondrogenesis, and GDF5 polymorphism is a genetic factor contributing to osteoarthritis (OA). However, the role of GDF5 expression in the synovial membrane remains unclear. The aim of this study was to determine the expression of GDF5 in the synovium in patients with primary knee OA. Materials and methods: Thirty patients scheduled for total knee arthroplasty were enrolled. Patients were grouped according to the Kellgren and Lawrence classification (KL) as grade 3 (15 patients) and grade 4 (15 patients). Synovial tissue was collected, and the GDF5 expression level was determined by real-time PCR. Ten synovial samples were randomly selected to evaluate the degree of synovitis. Results: Baseline characteristics did not differ between the two groups. The expression of GDF5 was significantly higher in the KL4 group (median expression 3.50, range 1.45-13.62) than in the KL3 group (median expression 1.81, range 0-9.46) (p value = 0.02). Histological staining of the synovium indicated low-grade synovitis in both groups. Conclusions: GDF5 expression in the synovium was positively associated with the radiographic severity of knee OA. The difference in GDF5 expression between the KL3 and KL4 groups supports the hypothesis that, through GDF5, the synovium may have important roles in cartilage maintenance and homeostasis in primary knee OA.
ABSTRACT
Osteoporosis is frequently found in chronic diabetic patients, and it results in an increased risk of bone fractures occurring. The underlying mechanism of osteoporosis in diabetic patients is still largely unknown. Annexin A2 (ANXA2), a family of calcium-binding proteins, has been reported to be involved in many biological process including bone remodeling. This study aimed to investigate the role of ANXA2 in mesenchymal stem cells (MSCs) during in vitro osteoinduction under high-glucose concentrations. Osteogenic gene expression, calcium deposition, and cellular senescence were determined. The high-glucose conditions reduced the osteogenic differentiation potential of the MSCs along with the lower expression of ANXA2. Moreover, the high-glucose conditions increased the cellular senescence of the MSCs as determined by senescence-associated ß-galactosidase staining and the expression of p16, p21, and p53 genes. The addition of recombinant ANXA2 could recover the glucose-induced deterioration of the osteogenic differentiation of the MSCs and ameliorate the glucose-induced cellular senescence of the MSCs. A Western blot analysis revealed an increase in p53 and phosphorylated p53 (Ser 15), which was decreased by recombinant ANXA2 in MSC osteoblastic differentiation under high-glucose conditions. Our study suggested that the alteration of ANXA2 in high-glucose conditions may be one of the plausible factors in the deterioration of bones in diabetic patients by triggering cellular senescence.
Subject(s)
Annexin A2 , Mesenchymal Stem Cells , Osteoporosis , Humans , Osteogenesis/genetics , Annexin A2/genetics , Annexin A2/metabolism , Tumor Suppressor Protein p53/metabolism , Calcium/metabolism , Mesenchymal Stem Cells/metabolism , Cell Differentiation , Cellular Senescence/genetics , Osteoporosis/metabolism , Glucose/pharmacology , Glucose/metabolism , beta-Galactosidase/metabolism , Cells, CulturedABSTRACT
Calcium pyrophosphate deposition disease, previously known as pseudogout, is a type of chronic and painful joint arthropathy. Accurate identification of calcium pyrophosphate dihydrate (CPPD) single crystals is crucial for determining the best course of treatment. In this study, a two-step method involving alizarin red S (ARS) and a xanthene dipicolylamine ZnII (XDZ) complex was employed for the identification of CPPD single crystals in both triclinic and monoclinic forms using a fluorescence microscope and a microplate reader. The accurate identification method proposed in this study has the potential to advance the diagnosis and treatment of patients suffering from painful gouty arthritis.
Subject(s)
Calcium Pyrophosphate , Chondrocalcinosis , Humans , Xanthenes , Fluorescence , ZincABSTRACT
Background: Radiographic assessment of hallux valgus is an essential process. Residual rotational deformity was shown associated with higher recurrent rate. This study aims to comprehensively assess reliability of measurement of various parameters from plain films and weight-bearing CT scan. Methods: A total of 40 pre-operative plain radiographs, 40 post-operative plain radiographs, and 37 weight-bearing CT scan were evaluated to determine reliability of hallux valgus parameters. Results: TSP and head shape representing coronal plane deformity showed lower inter-observer reliability compared to other parameters using for transverse plane evaluation especially in post-operative period. (post-op TSP amongst 3 assessors: κ = 0.386, 0.520, 0.340; post-op head shape: κ = 0.374, 0.375, 0.295) Using α angle for evaluation 1st metatarsal rotation in weight-bearing CT scan demonstrated very good reliability for inter-observer (ICC = 0.853 (95% CI = 0.715-0.925)) and intra-observer (ICC = 0.902 (95% CI = 0.844-0.939)). Conclusion: Weight-bearing CT scan can improve reliability in post-operative coronal plane assessment.
Subject(s)
Hallux Valgus , Metatarsal Bones , Hallux Valgus/diagnostic imaging , Hallux Valgus/surgery , Humans , Metatarsal Bones/surgery , Reproducibility of Results , Tomography, X-Ray Computed , Weight-BearingABSTRACT
BACKGROUND: Lateral epicondylitis is one of the most common upper extremity problems presented to orthopedic surgeons. Despite a rapid and accurate arrival at a diagnosis by clinical examination, there exists no consensus classification for this condition, which hampers clinical approaches for treatment of the disease based on its severity. Thus, the aim of this study was to propose and valiadate a new magnetic resonance imaging (MRI) classification of lateral epicondylitis, staging by tendinosis, the degree of thickness tears of the common extensor tendon (CET) and bone bruise lesion. METHOD: MRI assessment of the elbow of 75 patients (57 women and 18 men; mean age:51.4 years (range,34-73) from Jan 2014 to Jan 2021 who were diagnosed with lateral epicondylitis were included in the study. MR images were reviewed retrospectively by two independent upper extremities orthopedists and one musculoskeletal radiologist. Inter- and intra-observer reliabilities for the classification were calculated using kappa statistics for the analysis of interrater agreement. Correlation between the stage of the disease and the duration of symptom before MRI was calculated using Kruskal-wallis test. RESULTS: Various degrees of CET lesions were demonstrated in this population (Stage I-17, IIA-7, IIB-22 and III-29). Intra-observer agreements of MRI staging were substantial to satisfactory. Inter-observer agreements were moderate to substantial. There was no significant correlation between the disease stage and the patient age or the duration of symptom before MRI. CONCLUSION: Our MRI classification has emerged as one of the most reliable methods to define stages of chronic lateral epicondylitis. At the end, we have suggeted a clearer direction for understanding the disease pathology as well as an appropriate management protocol for each stage of the disease in line with the recent body of literature.