ABSTRACT
The barrier performance and structural lightening of organic materials are increasingly desired and constitute a major challenge for manufacturers, particularly for transport and packaging. A promising technique which tends to emerge in recent years is that of multinanolayer coextrusion. The advantage is that it can produce multilayers made of thousands of very thin layers, leading to new properties due to crystalline morphology changes induced by confinement. This paper is focusing on the study of multinanolayered films with alternated polyethylene (PE), compatibilizer (PEgMA) and polyamide 6 (PA6) layers and made by a forced assembly coextrusion process equipped with layer multiplying elements (LME). PE/PA6 multilayer films consisting of 5 to 2049 layers (respectively 0 to 9 LME) were successfully obtained with well-organized multilayered structure. The evolution of the morphology and the microstructure of these two semi-crystalline polymers, when the thickness of each polymer layer decreases from micro-scale to nano-scale, was correlated to the water and gas transport properties of the PE/PA multilayers. The expected improvement of barrier properties was limited due to the on-edge orientation of crystals in very thin PE and PA6 layers. Despite this change of crystalline morphology, a slight improvement of the gas barrier properties was shown by comparing experimental results with permeabilities predicted on the basis of a serial model developed by considering a PE/PA6 interphase. This interphase observed by TEM images and the on-edge crystal orientation in multilayers were evidenced from mechanical properties showing an increase of the stiffness and the strength.
ABSTRACT
We optimize the elaboration of very thin film of poly(vinylidene fluoride) (PVDF) polymer presenting a well-controlled thickness, roughness, and nano-inclusions amount. We focused our effort on the spin coating elaboration technique which is easy to transfer to an industrial process. We show that it is possible to obtain continuous and smooth thin films with mean thicknesses of 90 nm by properly adjusting the concentration and the viscosity of the PVDF solution as well as the spin rate and the substrate temperature of the elaboration process. The electro-active phase content versus the magnetic and structural properties of the composite films is reported and fully discussed. Last but not least, micro-patterning optical lithography combined with plasma etching has been used to obtain well-defined one-dimensional micro-stripes as well as squared-rings, demonstrating the easy-to-transfer silicon technology to polymer-based devices.
ABSTRACT
Design of materials with polymer-like properties at service temperature but able to flow like simple liquids when heated remains one of the important challenges of supramolecular chemistry. Combining these antagonistic properties is highly desirable to provide durability, processability, and recyclability of materials. Here, we explore a new strategy based on polycondensation reactions to design supramolecular polymer materials with stress at break above 10 MPa and melt viscosity lower than 1 Pa·s. We report the synthesis and rheological and mechanical properties (uniaxial tensile tests) of supramolecular polymers based on a multiblock polyamide architecture. The flexibility of polycondensation reactions made it possible to control the molecular size distribution, the strength of hydrogen bonds, and the crystallization of middle and end groups and to achieve targeted properties.
ABSTRACT
We show here that complementary interactions can suppress mesoscopic order and thus lead to a counterintuitive change in material properties. We present results for telechelic supramolecular polymers based on poly(propylene oxide) (PPO), thymine (Thy), and diaminotriazine (DAT). The self-complementary systems based on Thy exhibit lamellar order and 2D crystallization of Thy in the bulk. We show that the microphase segregation is inhibited by addition of DAT: the strong complementary Thy-DAT interaction inhibits crystallization of thymine in microdomains and lamellar structuration. As a result, the supramolecular polymer with only weakly self-complementary stickers is a solid, whereas the supramolecular polymer with strongly complementary stickers is a liquid.
Subject(s)
Polymers/chemistry , Propylene Glycols/chemistry , Thymine/chemistry , Triazines/chemistry , Macromolecular Substances/chemical synthesis , Macromolecular Substances/chemistry , Polymers/chemical synthesis , Propylene Glycols/chemical synthesisABSTRACT
In supramolecular polymers, directional interactions control the constituting units connectivity, but dispersion forces may conspire to make complex organizations. Here we report on the long-range order and order-disorder transition (ODT) of main-chain supramolecular polymers based on poly(propylene oxide) (PPO) spacers functionalized on both ends with thymine. Below the ODT temperature (T(ODT)), these compounds are semicrystalline with a lamellar structure, showing nanophase separation between crystallized thymine planes and amorphous PPO layers. Above T(ODT), they are amorphous and homogeneous even though their X-ray scattering spectrum reveals a peak. This peak is due to correlation hole effect resulting from contrast between end-functional groups and spacer. Macroscopically, the transition is accompanied by dramatic flow and mechanical properties changes.