ABSTRACT
Rising global temperature, pollution load, and energy crises are serious problems, recently facing the world. Scientists around the world are ambitious to find eco-friendly and cost-effective routes for resolving these problems. Biochar has emerged as an agent for environmental remediation and has proven to be the effective sorbent to inorganic and organic pollutants in water and soil. Endowed with unique attributes such as porous structure, larger specific surface area (SSA), abundant surface functional groups, better cation exchange capacity (CEC), strong adsorption capacity, high environmental stability, embedded minerals, and micronutrients, biochar is presented as a promising material for environmental management, reduction in greenhouse gases (GHGs) emissions, soil management, and soil fertility enhancement. Therefore, the current review covers the influence of key factors (pyrolysis temperature, retention time, gas flow rate, and reactor design) on the production yield and property of biochar. Furthermore, this review emphasizes the diverse application of biochar such as waste management, construction material, adsorptive removal of petroleum and oil from aqueous media, immobilization of contaminants, carbon sequestration, and their role in climate change mitigation, soil conditioner, along with opportunities and challenges. Finally, this review discusses the evaluation of biochar standardization by different international agencies and their economic perspective.
Subject(s)
Environmental Pollutants , Greenhouse Gases , Petroleum , Soil/chemistry , Biodiversity , Temperature , Charcoal/chemistry , Water , MicronutrientsABSTRACT
Poultry litter (PL) utilisation has been widely studied for production of phosphorus (P) rich biochars. Recent research documented co-pyrolysis of PL with nutrient rich chemical additives like rock phosphate, phosphoric acid and magnesium (Mg) salts for production of P-Mg enriched biochar with improved P use efficiency. However, research is highly scarce on utilisation of waste materials for production of PL biochar enriched in P, potassium (K) and sulphur (S). In this context, present work investigated co-pyrolysis (700°C, 10°C/min, 1h residence time) of PL with banana peduncle (BP) and phosphogypsum (PG) in different w/w ratios (1:1:1, 1:2:1, 1:3:1) of BP-PL-PG for production of K-P-S enriched biochars composites. These biochars mainly showed variations in their K-P-S contents. The K (5.1%) and S (11.35%) enrichment was relatively higher in BP-PL-PG (1:1:1) biochar than PL biochar (K-3.70% and S-0.96%). However, P content was higher in PL biochar (4.48%) and was reduced in biochar composites. The P contents were 3.84, 2.84, and 2.44% in BP-PL-PG (1:3:1), BP-PL-PG (1:2:1) and BP-PL-PG (1:1:1) composites respectively. In biochars, P was present predominantly as Ca-Mg bound form. Furthermore, best fit of second order kinetic model indicated slow-release behaviour of P from biochars and composites. These results highlight the scope of co-pyrolysis of PL with selected wastes for production of multi-nutrients enriched biochars with improved nutrient availability for soil application.
Subject(s)
Musa , Pyrolysis , Animals , Calcium Sulfate , Charcoal/chemistry , Nutrients , Phosphorus , Poultry , Soil/chemistryABSTRACT
Herein, biochar was produced by the slow pyrolysis of sugarcane bagasse at 500 °C in absence of oxygen. The resulting sugarcane bagasse biochar (SB500) was characterized and used for aqueous carbofuran sorptive removal. Batch carbofuran sorption studies were accomplished to ascertain the influence of solution pH, contact time, temperature (25, 35 and 45 °C) and adsorbate/adsorbent concentration. SB500 adsorbed more carbofuran at low pH values and less carbofuran at high pH values. The necessary sorption equilibrium, kinetic and thermodynamic parameters were determined. The equilibrium isotherm data were fitted to the Freundlich, Langmuir and Temkin models. The Langmuir equation best fitted the experimental sorption data. The maximum Langmuir adsorption capacity of 18.9 mg g-1 was obtained at pH 6.0 and 45 °C. The enthalpy change (ΔH°), entropy change (ΔS°) and Gibbs free energy (ΔG°) were evaluated. The fixed-bed carbofuran sorption studies were carried out using the optimum parameters determined via the batch studies. The necessary fixed-bed design parameters were obtained. Carbofuran desorption and SB500 regeneration were successfully achieved. About 96% of the total carbofuran was successfully desorbed from the exhausted biochar using 20 mL ethanol in 10 mL increments. Moreover, a possible carbofuran adsorption mechanism has been proposed. A number of interactions including (1) hydrogen bonding of the protonated and neutral carbofuran to biochar, (2) carbofuran sorption onto biochar via π-π electron donor-acceptor interactions and (3) carbofuran diffusion into the biochar pores were considered to explain the sorption mechanism. The batch and fixed-bed sorption results demonstrate that the sugarcane bagasse biochar (SB500) can be effectively used for the sustainable removal and recovery of carbofuran from water.