In vivo dentin microhardness beneath a calcium-phosphate cement.

A minimally invasive caries-removal technique preserves potentially repairable, caries-affected dentin. Mineral-releasing cements may promote remineralization of soft residual dentin. This study evaluated the in vivo remineralization capacity of resin-based calcium-phosphate cement (Ca-PO(4)) used for indirect pulp-capping. Permanent carious and sound teeth indicated for extraction were excavated and restored either with or without the Ca-PO(4) base (control), followed by adhesive restoration. Study teeth were extracted after 3 months, followed by sectioning and in vitro microhardness analysis of the cavity floor to 115-microm depth. Caries-affected dentin that received acid conditioning prior to Ca-PO(4) basing showed significantly increased Knoop hardness near the cavity floor. The non-etched group presented results similar to those of the non-treated group. Acid etching prior to cement application increased microhardness of residual dentin near the interface after 3 months in situ.

Sustainable agriculture: how to sustain a production system in a changing environment.

During the past 10-15 years, sustainable agriculture has progressed from a focus primarily on a low-input, organic farming approach with a major emphasis on small fruit or vegetable production farms, often described as Low Input Sustainable Agriculture, to the current situation where sustainability is an important part of mainstream animal and plant production units. The US Department of Agriculture programmes cover a broad range of activities, including conserving the natural resource base, enhancing environmental quality, and sustaining productivity of the nation's farms. The use of Geographic Information Systems technology to direct application of fertilisers, pesticides, and herbicides is one example of a rapidly emerging technology that can reduce use of external inputs, protect the agricultural environment, and improve economic returns. This Geographic Information Systems technology also is being used to localise animal pest and disease problems, assist in regulatory or control measures, and identify high risk areas that might need different management systems or should be avoided as sites for animal production. Use of intensive grazing systems also has increased markedly over the past 5-6 years. These systems will allow longer grazing seasons in southern parts of the USA, provide more efficient use of the forages being produced and reduce labour costs in the typical dairy operation. Major animal and plant production agriculture-oriented programmes at the US Department of Agriculture focus on integrated production systems, use of Integrated Pest Management techniques, and development of alternative methods to manage pests and diseases that reduce or avoid the use of drugs and chemicals. The US Department of Agriculture has a programme for sustainable agriculture, the Sustainable Agriculture Research and Education programme, which emphasises alternative approaches for animal and plant production systems.

Effects of palladium addition on emission of mercury vapor from dental amalgam.

OBJECTIVES: The purpose of this investigation was to test the hypothesis that palladium causes a reduction in mercury emission when added to dental amalgam during condensation. METHODS: Mercury vapor release was measured in a closed bottle system and an Intraoral Flow device(IOF). Conventional amalgam restorations were modified by addition of various palladium pellets. 1.57 mm diameter palladium pellets with different porosities were fabricated. These pellets were then placed in amalgam restoration using typical condensation and carving procedures. The samples were stored in a closed bottle and mercury measurements were taken from the bottles at 30 min, 1, 3, 5, 24 and 48 h and 7 days after trituration using a Jerome 411 Mercury Vapor Analyzer (Arizona Instrument Corp., Jerome, AZ). The palladium pellets identified as the most effective in mercury vapor reduction were further tested in an IOF device. Data were analyzed by two-way ANOVA followed by Tukey HSD pairwise analysis for significant findings (alpha = 0.05). RESULTS: The palladium containing amalgams when tested in the closed bottle system yielded significantly lower (p < 0.05) mercury vapor release than the controls. Pellets fabricated with the highest porosity yielded the greatest reduction in overall mercury vapor release. In the IOF device the overall amount of mercury vapor released from the palladium containing amalgams was also significantly less than the control (p < 0.05). SIGNIFICANCE: Mercury vapor emission from dental amalgam was greatly reduced by adding palladium pellets to amalgam during condensation. These techniques require only slight modifications of the standard operative procedures.

In vitro wear of resin denture teeth.

STATEMENT OF PROBLEM: One of the most important physical properties of artificial teeth used in the restoration of the edentulous patient is wear resistance, and the ability of these teeth to maintain a stable occlusal relationship over time. PURPOSE: This study compared the in vitro wear of four different resin denture teeth against human enamel. MATERIAL AND METHODS: Five denture tooth samples opposing five enamel abraders were positioned in a mechanical wear testing device for two 5,000 cycle wear periods (total of 10,000 cycles) under a 13.4 N load. All tests were conducted in human saliva, and the wear was measured at the end of each test period. RESULTS: The wear of the Classic and Kenson acrylic resin denture teeth was much greater than the DB Plus and MLI composite teeth after 10,000 cycles. The wear of the KENSON denture tooth was also greater than the Classic tooth. No wear differences were found between the two composite teeth. CONCLUSIONS: The wear of DB Plus and MLI resin denture teeth was approximately 50% less than the wear of Classic and Kenson teeth when opposed by human enamel.

Biaxial flexural strength and indentation fracture toughness of three new dental core ceramics.

The traditional gold and porcelain fused to metal crowns have been challenged by the esthetic all-ceramic crown materials. Only previous experience with poor mechanical properties, lack of standardized tooth preparation, and processing challenges have prevented universal acceptance of all-ceramic crowns. However, stronger and tougher ceramics and unique processing methods for ceramics have been developed in the past 20 years. In this study, three new ceramic crown core materials were tested to compare their biaxial flexural strength and indentation fracture toughness. Ten specimens of Empress, In-Ceram, and Procera AllCeram ceramics were prepared according to their manufacturers' recommendations. The results revealed significant differences in flexural strength for the three materials (p < or = 0.05). The average flexural strengths of AllCeram, In Ceram, and Empress ceramics were 687 MPa, 352 MPa, and 134 MPa respectively. There was no statistically significant difference between the fracture toughness of Procera (4.48 MPa x m1/2) and In-Ceram ceramics (4.49 MPa x m1/2); however, both ceramics had significantly higher fracture toughness (p < 0.005) than Empress ceramic (1.74 MPa x m1/2).

An in vitro investigation of the wear of enamel on porcelain and gold in saliva.

This study compared enamel wear against low-fusing porcelain (Procera All-Ceramic) with the wear against feldspathic porcelain (Ceramco) and gold alloy (Olympia). Human enamel abraders were polished to a 3 microns variance on silicon carbide paper. Five enamel abraders were abraded against five disks that were fabricated from (1) gold alloy polished to 1 micron variance, (2) autoglazed feldspathic porcelain, and (3) autoglazed low-fusing porcelain. The enamel sample was tested in human saliva in a wear machine with a constant load of 1 pound during 10,000 rotational cycles. The amount of wear was determined with a stereomicroscope at magnification x64. Significant differences in mean enamel wear were found when abraded against Olympia gold (9 microns), Procera All-Ceramic (60 microns), and Ceramco feldspathic porcelain (230 microns). Significant differences in restorative material wear were found between Olympia gold (0.32 microns) and the porcelain materials, Procera All-Ceramic (4.3 microns) and Ceramco feldspathic porcelain (3.7 microns).

Dynamic viscoelastic properties of processed soft denture liners: Part II--Effect of aging.

The proper functioning of soft denture liners depends to a great extent on their mechanical properties. As with many polymers these materials are affected by aging. Twelve soft denture liners were processed by a laboratory according to the manufacturers' directions. Five specimens of each material were tested without aging. Five additional specimens of each material were subjected to 900 hours of accelerated aging in a Weather-Ometer instrument. These were tested with a dynamic viscoelastometer at three frequencies and two temperatures, and data for 37 degrees C and 1 Hz was obtained. Two of the ethyl methacrylate resins demonstrated the largest increases in storage (E') and loss moduli (E") after aging. These materials also showed the greatest overall E' and E". One denture liner material exhibited 673% and 488% increases in E' and E", and other materials showed smaller increases. The effects of aging on the damping factor (tan delta) were varied and five materials showed increased tan delta. Only two ethyl methacrylate resins developed lower tan delta. All the silicone and polyphosphazine rubbers showed small changes after aging and had the lowest tan delta values. Significance of differences between materials and treatments was tested with ANOVA, Scheffé intervals, and t-tests at a = 0.05. The ethyl methacrylate soft denture liners were affected the most by accelerated aging, and the silicones and polyphosphazine were least affected. The ethyl methacrylate resins also had the greatest values of E', E", and tan delta after aging.

Dynamic viscoelastic properties of processed soft denture liners: Part I--Initial properties.

This research evaluated the dynamic viscoelastic properties of 12 laboratory-processed soft denture liners. Specimens, 1.4 x 3 x 40 mm, were prepared according to the manufacturer's instructions. Five specimens of each material were tested under applied strain frequencies of 1, 5, or 10 Hz and temperatures of 23 degrees C and 37 degrees C. The values at 37 degrees C and 1 Hz were judged most important because they closely approximate the service environment; therefore material comparisons were made for these conditions. Samples were tested with a custom-made dynamic viscoelastometer. The statistical significance of the results was tested by ANOVA and Scheffe's intervals test. Large differences in the storage modulus (elastic stiffness) were found. One acrylic resin, Verno-Soft, showed significantly higher storage moduli than the other materials. The viscous behavior of the materials was reflected by the loss modulus; here large differences were also found. Verno-Soft again exhibited much higher values than all of the other materials. Three other acrylic resins (Super Soft, Soft-Pak, and Justi Soft) also showed significantly higher loss moduli than the other materials. Significant differences were found in the damping factor between many of the materials. Most of the acrylic and vinyl resins had higher damping factors than the silicone and polyphosphazine rubbers. The values of the storage moduli, loss moduli, and the damping factor were affected by temperature and by applied strain frequency with some materials.

Surface cracking identified in polished and self-glazed dental porcelain.

PURPOSE: Polishing and glazing porcelain surfaces of restorations is thought to help reduce the wear on the opposing occlusion because of reduced roughness. MATERIALS AND METHODS: To test this theory, samples of a variety of dental porcelains were prepared and subjected to various polishing and self-glazing treatments commonly used in dentistry and then viewed using scanning electron microscope (SEM). Fine cracks were discovered in the surface of the samples that had been polished and then self-glazed. These cracks were typically greater than 50 microns in length with submicron surface openings and crack depths less than 20 microns. To establish the treatments responsible for the formation of these cracks, a more controlled study was performed. Samples of Vita VMK 68 no. 559 incisal porcelain (Vita Zahnfabrik, Bad Såchingen, Germany) were prepared and subjected to six treatments (sample size = 3): treatment no. 1, as-fired condition; treatment no. 2, self-glazed (32 degrees C per minute to 960 degrees C, then cooled); treatments no. 3 and 4, wet ground followed by 1 micron diamond polish (no. 4 was then self-glazed); treatments no. 5 and 6, ground and polished using a Shofu porcelain adjustment kit (Shofu Inc, Kyoto, Japan) (no. 6 was then self-glazed). The samples were observed using SEM. RESULTS: Treatments no. 1, 2, 3, and 5 showed no cracking; however, treatments no. 4 and 6 showed cracking in all specimens (approximate levels 5,100 microns/mm2 and 3,600 microns/mm2, respectively). CONCLUSIONS: Polishing followed by self-glazing produces fine surface cracks. The rougher surface resulting from the surface cracks and subsequent porcelain chipping may cause wear of opposing occlusal surfaces.

Association between neutrophil functions and periparturient disorders in cows.

Neutrophil functions were examined in healthy periparturient dairy cows (n = 46) and in cows with retained placenta and metritis complex (n = 20); metritis (n = 18); or mastitis (n = 13). Blood samples (50 ml) were collected from each cow via jugular vein twice weekly from 1.5 weeks before to 4 weeks after parturition. Neutrophil function was evaluated, using 6 tests: random migration, chemotaxis, ingestion, myeloperoxidase activity (iodination), superoxide production (cytochrome C reduction), and antibody-dependent cell-mediated cytotoxicity. Ability to ingest bacteria and random migration activity of neutrophils from clinically normal cows were high around parturition and increased immediately after parturition, whereas myeloperoxidase activity and antibody-dependent cell-mediated cytotoxicity ability of neutrophils from these cows decreased after parturition. Measurement of neutrophil function in 4 ovariectomized cows revealed significant (P < 0.0005) seasonal changes in results of all 6 functional assays. We observed various defects of neutrophil function in all cows with abnormal conditions after parturition. Before parturition, superoxide production activity by neutrophils from cows with metritis and chemotaxis by neutrophils from cows with mastitis were significantly (P < 0.001 and P < 0.05, respectively) lower, indicating that a defect of neutrophil function may be a predisposing factor in the development of these disorders. In conclusion, the host defense role of neutrophils in periparturient cows was impaired, principally because of a defect in killing capacity, which may increase susceptibility to infections. We also investigated the in vitro effects of arachidonic acid metabolites and recombinant human colony-stimulating factors (rhCSF) on functions of neutrophils from clinically normal and postparturient cows with abnormalities, including retained placenta, metritis, or mastitis (n = 5/group). Each abnormal cow was matched for postpartum period with a clinically normal cow. Neutrophils from individual cows were preincubated with arachidonic acid metabolites (prostaglandin F2 alpha, 10(-7) M; prostaglandin E2, 10(-6) M; leukotriene B4, 10(-8) M; and lipoxin B, 10(-8) M) and rhCSF (rh-granulocyte-CSF, 1,000 or 6,000 U/ml; rh-granulocyte-macrophage-CSF, 5 or 15 ng/ml) in a 37 C water bath for 30 minutes before submitting them to function assays. There was no response by neutrophils from either clinically normal or abnormal postparturient cows to treatment with either arachidonic acid metabolites or rhCSF in any of the 6 functional assays. However, preincubation of neutrophils alone in a 37 C water bath for 30 minutes resulted in some alteration of neutrophil function.(ABSTRACT TRUNCATED AT 400 WORDS)

Effect of interfacial variables on metal-porcelain bonding.

While ceramic-to-metal bonding has been used in many applications, the actual chemical and physical factors leading to optimum bond strength are not well understood. In this work, several variables affecting the bonding between dental porcelain and a palladium alloy (85% Pd, 10% Cu, and 5% Ga) were investigated: 1) precoating the metal by sputtering various oxides before porcelaining; 2) peroxidation of the metal base before porcelaining; 3) porcelaining under reducing atmosphere; and 4) surface roughening at controlled levels before porcelaining. Using a modification of the push doughnut shear bond strength test to measure bond strength the following results were obtained. 1) Compared with standard "control" samples, the aluminum oxide precoated specimens showed a bond strength improvement of 46%, while the copper, manganese, and tin oxide precoatings exhibited smaller effects. 2) Preoxidation of the metal base led to pronounced bond strengthening (152%) by surface roughening as well as oxide formation. 3) Porcelaining under a reducing atmosphere severely reduced bond strength (88% lower than the controls) indicating the role of oxidation during the standard firing cycle. 4) Mechanical roughening of the surface by controlled amounts gave pronounced improvements with greater notch depth. Coarse roughening produced the highest bond strength improvements (486%).

Identification of oxide layers of commercially pure titanium in response to cleaning procedures.

The composition and thickness of the oxide formed on commercially pure titanium disks were analyzed after the disks were subjected to one of four surface treatments: (1) cleaning with the initial Brånemark regimen, (2) Brånemark regimen and autoclaving, (3) Brånemark regimen and radiofrequency glow discharge (RFGD) treatment for 5 minutes, and (4) Brånemark regimen and RFGD treatment followed by storage for 30 days. Electron spectroscopy for chemical analysis showed titanium dioxide to be the prominent oxide; no significant differences in the thickness of the oxide layers were found.

Fracture-surface analysis of a glaze-strengthened magnesia core material.

The purpose of this research was to study fracture initiation in a glaze-strengthened magnesia ceramic substance used as a core material for all-ceramic crowns. The fracture surfaces of modulus of rupture bars were studied to locate the fracture initiation point. These points were located at the center of hackles that are oriented parallel to the direction of the crack advance. The distance from the fracture initiation point to the surface of the test bars was measured. A direct relationship was found between the flexure strength and the depth of the fracture initiation point. This is consistent with the theory that residual compressive stresses at the glaze-body interface inhibit the spread of flaws and are responsible for the increases in strengths observed.

Influence of arachidonic acid metabolites and steroids on function of bovine polymorphonuclear neutrophils.

Polymorphonuclear neutrophils (PMN) from 4 ovariectomized healthy cows were incubated with 0 (control), 10(-8), 10(-7), and 10(-6) M arachidonic acid metabolites of the cyclo- and lipoxygenase pathways for 30 minutes, and with steroids for 2 hours. Immediately after incubation, PMN were subjected to the following function assays: chemotaxis against zymosan-activated serum, chemotaxis against arachidonic acid metabolite or steroid at the doses given (only control PMN were tested), random migration, ingestion of 125I-iododeoxyuridine-labeled Staphylococcus aureus (125I-IdUR-S aureus), iodination of proteins, cytochrome C reduction, antibody-independent and -dependent cell-mediated cytotoxicity (AICC and ADCC). Prostaglandin F2 alpha was chemoattractant and stimulated ingestion of 125I-IdUR-S aureus. Prostaglandin E2 stimulated cytochrome C reduction, whereas prostacyclin inhibited iodination of proteins. Thromboxane B2 stimulated ADCC. Leukotriene B4 was chemoattractant for bovine PMN and stimulated random migration and AICC. 5-Hydroxyeicosatetraenoic acid was also chemoattractant, but inhibited ingestion of 125I-IdUR-S aureus. 15-Hydroxyeicosatetraenoic acid was chemoattractant and decreased ADCC. Lipoxin A4 stimulated random migration, whereas lipoxin B4 inhibited chemotaxis against zymosan-activated serum, but was chemoattractant and stimulated cytochrome C reduction. 12-Hydroxyhepadecatrienoic acid and 12-hydroxyeicosatetraenoic acid did not influence any of the PMN functions tested. Of the steroids tested, cortisol increased ADCC, and progesterone stimulated cytochrome C reduction, but decreased ADCC. 17 beta-Estradiol and estrone were chemoattractant and stimulated cytochrome C reduction. In addition, estrone also stimulated random migration.(ABSTRACT TRUNCATED AT 250 WORDS)

Function of neutrophils and chemoattractant properties of fetal placental tissue during the last month of pregnancy in cows.

Neutrophils were isolated from the blood of pregnant cows on days 255, 265, and 275 of pregnancy, and on the day of parturition (n = 5/group), and in addition, simultaneously from 4 ovariectomized healthy cows (control animals). Neutrophils were subjected to neutrophil function assays (chemotaxis against zymosan-activated serum, random migration, ingestion of 125I-iododeoxyuridine [IdUR]-labeled Staphylococcus aureus, iodination of proteins, cytochrome C reduction, antibody-independent and antibody-dependent cell-mediated cytotoxicity). Results were expressed as percentage of control animals. Fetal placental tissue (cotyledon), uterine wall tissue, and skeletal muscle were obtained from the principal animals on the aforementioned days via laparotomy, and tissue suspensions were prepared. Chemotaxis of neutrophils was tested against tissue supernatants. Compared with day 255, there was an increase in ingestion of 125I-IdUR-S aureus at parturition, whereas iodination of proteins and cytochrome C reduction were reduced on the day of calving. The other neutrophil functions tested did not change over time of gestation. Fetal placental and uterine wall tissue attracted neutrophils with uterine wall tissue having a tendency to be more potent than cotyledonary tissue. Skeletal muscle tissue did not attract neutrophils. There was no change in chemotaxis response of neutrophils evoked by intrauterine and uterine tissues over time of gestation. It was concluded that at parturition, neutrophil function is impaired with respect to their bactericidal effects, which may render the animal more susceptible to bacterial infections, and that the chemoattractant properties of fetal placental and uterine wall tissues are tissue-specific, at least when compared with skeletal muscle.(ABSTRACT TRUNCATED AT 250 WORDS)

Influence of conditioned media from bovine cotyledon tissue cultures on function of bovine neutrophils.

Bovine fetal placental (cotyledon) tissue obtained from pregnant cows on days 255, 265, and 275 of gestation, as well as immediately after parturition (n = 5) was incubated in media for 48 hours, and the incubation media were collected. Neutrophils from 4 ovariectomized nonpregnant cows were incubated for 2 hours with conditioned media from placental tissue cultures or medium (control). Immediately after incubation, the neutrophils were subjected to the following leukocyte function assays: chemotaxis against zymosan-activated serum, chemotaxis against undiluted conditioned media (only neutrophils that were incubated in medium only), random migration, ingestion of 125I-iododeoxyuridine Staphylococcus aureus (125I-IdUR-S aureus), iodination of proteins, cytochrome C reduction, and antibody-independent and -dependent cell-mediated cytotoxicity. Conditioned media from cultured cotyledon tissue was chemoattractant for bovine neutrophils, and increased chemotactic response of neutrophils against zymosan-activated serum by 13%. The following neutrophil functions were decreased: random migration by 25%, iodination of proteins by 44%, cytochrome C reduction by 13%, and antibody-dependent cell-mediated cytotoxicity by 5%. Ingestion of 125I-IdUR-S aureus and antibody-independent cell-mediated cytotoxicity were not influenced by coincubation of neutrophils and conditioned media. Time of gestation did not alter the effects of conditioned media on neutrophil function. It was concluded that chemotactic properties of cotyledon tissue extracts, as has been reported earlier, may be attributable to substances released by fetal placental tissue. Those substances might also locally or systemically influence the oxygen-dependent antimicrobial system of neutrophils, thereby causing an increased susceptibility to bacterial infections in the peripartum period.

A brief introduction to advanced surface modification technologies.

Techniques for the modification of surfaces are evolving rapidly. In implantology, few of the newer surface modification techniques have been used. The purpose of this paper is to provide an introduction to advanced surface modification processes that could be useful in dental implant manufacturing. There are three general techniques used to modify surfaces: add material, remove material, and change the material already present. Several processes for the addition of material to surfaces are described in this paper. Two new processes that can create relatively thick coatings are sol-gel and plasma-spraying. Several new processes making thin film coatings (sub-micron) have come from the electronics and optics industries. These are vapor deposition techniques, where the coating material condenses onto a surface from a vapor. The three basic vapor deposition techniques are: evaporation, sputtering, and chemical vapor deposition. New processes for the removal of material from surfaces, often for cleaning purposes, are glow discharge treatment and sputter-etching. Surface properties can also be changed without addition or removal of material by use of laser and electron beam thermal treatments. Ion implantation can be used to add material to surfaces, modify coatings, and change microstructures. The techniques outlined in this paper have great potential for improving implants.

Evaluation of edetate and thiamine for treatment of experimentally induced environmental lead poisoning in cattle.

Twenty mature Holstein cows were randomized into 5 treatment groups. Cows of groups 2 to 5 were given 2 mg of elemental Pb/kg of body weight for 28 days. Clinical signs of plumbism were scored, and blood for Pb, progesterone, and hematologic analyses was collected weekly. Cows also were examined weekly for anomalous ovarian cycles. Starting on study day 28, cows in group 3 were treated once daily with 2 mg of thiamine HCl/kg (IM) for 13 days, cows in group 4 were treated twice daily with 62 mg of Na2,Ca-EDTA/kg (IV) for 4 days, and cows in group 5 were given thiamine (dosage regimen the same as for group 3) plus Na2,Ca-EDTA (dosage regimen the same as for group 4). On study days 96 through 139, cows were slaughtered in a commercial abattoir and samples of blood, skeletal muscles, bones, liver, and kidneys were collected and assayed for Pb concentration. Thiamine was not effective in reducing blood Pb concentration, and treatment with Na2,Ca-EDTA and thiamine plus Na2,Ca-EDTA was effective in reducing the concentration of Pb in blood. However, treatment with thiamine was more effective than treatment with Na2,Ca-EDTA or thiamine plus Na2,Ca-EDTA in inducing remission of clinical signs of plumbism. The concentration of Pb in blood was significantly (P less than 0.05) correlated to the concentration of Pb in liver, kidneys, skeletal muscles, and bones. Significant (P less than 0.05) relationship existed between number of days from Pb exposure to slaughter and concentration of Pb in blood, liver, and skeletal muscles. Exposure to Pb did not significantly alter CBC values.(ABSTRACT TRUNCATED AT 250 WORDS)

Arachidonic acid metabolism by bovine placental tissue during the last month of pregnancy.

Conversion of tritiated arachidonic acid (AA) into metabolites of the cyclo- and lipoxygenase pathways by bovine fetal placental tissue (200 mg) and fetal plus maternal placental tissue (400 mg) of Days 255, 265, 275 of gestation and at parturition (n = 5) during a 30 min incubation was measured using reverse-phase high pressure liquid chromatography. Fetal placental tissue produced 13,14-dihydro-15-keto-prostaglandin E2 (PGEM) as the major metabolite, the synthesis of which increased from Day 265 to Day 275 and parturition by 150% and 475%, respectively. In tissues collected at parturition, PGE2 synthesis was also detected. On Day 275 and at parturition fetal placental tissue synthesized the metabolite 12-hydroxyheptadecatrienoic acid (HHT), and throughout the experimental period the lipoxygenase product 15-HETE was detected with synthesis rates increasing over time of gestation. In addition, an unidentified metabolite was regularly found in the radiochromatograms which eluted at 1 h and 1 min (U101), between HHT and 15-HETE. The synthesis of this metabolite decreased as pregnancy progressed. Furthermore, various other polar and nonpolar metabolites pooled under the heading UNID were eluted, the production of which increased over time of gestation. The presence of maternal placental tissue did not influence the synthesis of PGEM, 15-HETE and U101, but the production of HHT was decreased when maternal tissue was present. Also, as pregnancy progressed, maternal placental tissue seemed to contribute to the pool of unidentified metabolites. In conclusion, fetal placental tissue seems to be the major source of the AA metabolites when compared with maternal placental tissue, and AA metabolism by bovine placental tissue is markedly increased throughout the last month of pregnancy, suggesting a role for AA metabolites in mechanisms controlling parturition.