Enhancing microbial superoxide generation and conversion to hydroxyl radicals for enhanced bioremediation using iron-binding ligands.

Harnessing bacteria for superoxide production in bioremediation holds immense promise, yet its practical application is hindered by slow production rates and the relatively weak redox potential of superoxide. This study delves into a cost-effective approach to amplify superoxide production using an Arthrobacter strain, a prevalent soil bacterial genus. Our research reveals that introducing a carbon source along with specific iron-binding ligands, including deferoxamine (DFO), diethylenetriamine pentaacetate (DTPA), citrate, and oxalate, robustly augments microbial superoxide generation. Moreover, our findings suggest that these iron-binding ligands play a pivotal role in converting superoxide into hydroxyl radicals by modulating the electron transfer rate between Fe(III)/Fe(II) and superoxide. Remarkably, among the tested ligands, only DTPA emerges as a potent promoter of this conversion process when complexed with Fe(III). We identify an optimal Fe(III) to DTPA ratio of approximately 1:1 for enhancing hydroxyl radical production within the Arthrobacter culture. This research underscores the efficacy of simultaneously introducing carbon sources and DTPA in facilitating superoxide production and its subsequent conversion to hydroxyl radicals, significantly elevating bioremediation performance. Furthermore, our study reveals that DTPA augments superoxide production in cultures of diverse soils, with various soil microorganisms beyond Arthrobacter identified as contributors to superoxide generation. This emphasizes the universal applicability of DTPA across multiple bacterial genera. In conclusion, our study introduces a promising methodology for enhancing microbial superoxide production and its conversion into hydroxyl radicals. These findings hold substantial implications for the deployment of microbial reactive oxygen species in bioremediation, offering innovative solutions for addressing environmental contamination challenges.

Roles of quorum-sensing molecules in methane production from anaerobic digestion aided by biochar.

Biochar has been used to enhance methane generation from anaerobic digestion through establishing direct interspecific electron transfer between microorganisms. However, the microbial communication is still inadequate, thereby limiting further methane production improvement contributed by biochar. This study investigated the roles of quorum-sensing molecules, acylated homoserine lactone (AHL), in anaerobic digestion of waste activated sludge aided by biochar. Results showed that the co-addition of separated biochar and AHL achieved best methane production performance, with the maximal methane yield of 154.7 mL/g volatile suspended solids, which increased by 51.9%, 47.2%, 17.9%, and 39.4% respectively compared to that of control, AHL-loaded biochar, sole AHL, and sole biochar groups. The reason was that the co-addition of separated biochar and AHL promoted the stages of hydrolysis and acidification, promoting the conversion of organic matters and short-chain fatty acids, and optimizing the accumulation of acetate acid. Moreover, the methanogenesis stage also performed best among experimental groups. Correspondingly, the highest activities of electron transfer and coenzyme F420 were obtained, with increase ratios of 33.2% and 27.2% respectively compared to that of control. Furthermore, biochar did more significant effects on the evolution of microbial communities than AHL, and the direct interspecific electron transfer between fermentative bacteria and methanogens were possibly promoted.

High biomass yields of Chlorella protinosa with efficient nitrogen removal from secondary effluent in a membrane photobioreactor.

Further treatment of secondary effluents before their discharge into the receiving water bodies could alleviate water eutrophication. In this study, the Chlorella proteinosa was cultured in a membrane photobioreactor to further remove nitrogen from the secondary effluents. The effect of hydraulic retention time (HRT) on microalgae biomass yields and nutrient removal was studied. The results showed that soluble algal products concentration reduced in the suspension at low HRT, thereby alleviating microalgal growth inhibition. In addition, the lower HRT reduced the nitrogen limitation for Chlorella proteinosa's growth through the phase-out of nitrogen-related functional bacteria. As a result, the productivity for Chlorella proteinosa increased from 6.12 mg/L/day at an HRT of 24 hr to 20.18 mg/L/day at an HRT of 8 hr. The highest removal rates of 19.7 mg/L/day, 23.8 mg/L/day, and 105.4 mg/L/day were achieved at an HRT of 8 hr for total nitrogen (TN), ammonia, and chemical oxygen demand (COD), respectively. However, in terms of removal rate, TN and COD were the largest when HRT is 24 hr, which were 74.5% and 82.6% respectively. The maximum removal rate of ammonia nitrogen was 99.2% when HRT was 8 hr.

Water flush boosts performance of elemental sulfur-based denitrification packed-bed systems: Optimization and mechanisms.

Despite the promising potential of elemental sulfur-based denitrification (ESDeN) packed-bed progresses, challenges such as excessive biofilm growth and gas entrapment persist, leading to denitrification deterioration. Water flush (WF) is recognized as an effective strategy, yet its effects remain underexplored. To address this knowledge gap, this study systematically investigated WF effects on ESDeN packed-bed denitrification. Results demonstrated that controlling WF effectively regulated denitrification, achieving superior and stable rates. Compared to no WF (0.45 kgN·m-3·d-1), rates improved by 1.20 âˆ¼ 1.56 times under low-frequency (weekly WF, 0.54 kgN·m-3·d-1) and low-intensity WF (0.54 âˆ¼ 0.70 kgN·m-3·d-1). High-frequency (hours WF) and high-intensity WF (30 & 50 m/h) further amplified denitrification rates by 1.73 âˆ¼ 2.29 times. The enhanced denitrifications under low-frequency/intensity WF were mainly attributed to prolonged actual hydraulic retention time (AHRT), while high-frequency/intensity WF improved both AHRT prolonging and biofilm thinning, facilitating mass transfer. This study offers a promising avenue for fine-tuning denitrification rates via strategic WF adjustments.

Bacterial evolution in Biofiltration of drinking water treatment plant: Different response of phage and plasmid to varied water sources.

Biofiltration in drinking water treatment (BDWT) are popular as it holds promise as an alternative to chemical treatments, yet our understanding of the key drivers and trends underlying bacterial evolution within this process remains limited. While plasmids and phages are recognized as the main vectors of horizontal gene transfer (HGT), their roles in shaping bacterial evolution in BDWT remain largely unknown. Here we leverage global metagenomic data to unravel the primary forces driving bacterial evolution in BDWT. Our results revealed that the primary vector of HGT varies depending on the type of source water (groundwater and surface water). Both plasmids and phages accelerated bacterial evolution in BDWT by enhancing genetic diversity within species, but they drove contrasting evolutionary trends in functional redundancy in different source water types. Specifically, trends towards and away from functional redundancy (indicated as gene-protein ratio) were observed in surface-water and groundwater biofilters, respectively. Virulent phages drove bacterial evolution through synergistic interactions with bacterial species capable of natural transformation and with certain natural compounds that disrupt bacterial cytoplasmic membranes. Genes relating to water purification (such as Mn(II)-oxidizing genes), microbial risks (antibiotic resistance genes), and chemical risk (polycyclic aromatic hydrocarbons) were enriched via HGT in BDWT, highlighting the necessity for heighted focus on these useful and risky objects. Overall, these discoveries enhance our understanding of bacterial evolution in BDWT and have implications for the optimization of water treatment strategies.

Frequency-modulated alternating current-driven bioelectrodes for enhanced mineralization of Alizarin Yellow R.

The alternating current (AC)-driven bioelectrochemical process, in-situ coupling cathodic reduction and anodic oxidation in a single electrode, offers a promising way for the mineralization of refractory aromatic pollutants (RAPs). Frequency modulation is vital for aligning reduction and oxidation phases in AC-driven bioelectrodes, potentially enhancing their capability to mineralize RAPs. Herein, a frequency-modulated AC-driven bioelectrode was developed to enhance RAP mineralization, exemplified by the degradation of Alizarin Yellow R (AYR). Optimal performance was achieved at a frequency of 1.67 mHz, resulting in the highest efficiency for AYR decolorization and subsequent mineralization of intermediates. Performance declined at both higher (3.33 and 8.30 mHz) and lower (0.83 mHz) frequencies. The bioelectrode exhibited superior electron utilization, bidirectional electron transfer, and redox bifunctionality, effectively aligning reduction and oxidation processes to enhance AYR mineralization. The 1.67 mHz frequency facilitated the assembly of a collaborative microbiome dedicated to AYR bio-mineralization, characterized by an increased abundance of functional consortia proficient in azo dye reduction (e.g., Stenotrophomonas and Shinella), aromatic intermediates oxidation (e.g., Sphingopyxis and Sphingomonas), and electron transfer (e.g., Geobacter and Pseudomonas). This study reveals the role of frequency modulation in AC-driven bioelectrodes for enhanced RAP mineralization, offering a novel and sustainable approach for treating RAP-bearing wastewater.

Intermittent electrostimulation-modified direct interspecies electron transfer for enhanced methanogenesis in anaerobic digestion of sulfate-rich wastewater.

Methane recovery and organics removal in sulfate (SO42-)-rich wastewater anaerobic digestion are hindered by electron competition between methanogenesis and sulfidogenesis. Here, intermittently electrostimulated bioelectrodes were developed to facilitate direct interspecies electron transfer (DIET)-driven syntrophic methanogenesis, increasing substrate competition among methanogenic archaea (MA). By optimising the electrochemical environment, MA was able to employ electron transfer more efficiently than sulfate-reducing bacteria (SRB), resulting in significant methane accumulation (58.1 ± 1.0 mL-CH4/m3reactor) and COD removal (90.5 ± 0.5 %) at lower COD/SO42- ratio. Intermittent electrostimulation improved the metabolic pathway for electroactive bacteria to utilize acetate and direct electrons to electrotrophic MA, decreasing SRB abundance and affecting the sulfate reduction pathway. Intermittently electrostimulated biofilms significantly increased gene levels of key enzymes in electron transport for cytochrome and e-pili biosynthesis, crucial for DIET, demonstrating enhanced DIET-driven syntrophic methanogenesis. This study provides a strategic approach to optimize methanogenesis in sulfate-rich wastewater anaerobic digestion.

Inoculum source determines the stress resistance of electroactive functional taxa in biofilms: A metagenomic perspective.

The inoculum has a crucial impact on bioreactor initialization and performance. However, there is currently a lack of guidance on selecting appropriate inocula for applications in environmental biotechnology. In this study, we applied microbial electrolysis cells (MECs) as models to investigate the differences in the functional potential of electroactive microorganisms (EAMs) within anodic biofilms developed from four different inocula (natural or artificial), using shotgun metagenomic techniques. We specifically focused on extracellular electron transfer (EET) function and stress resistance, which affect the performance and stability of MECs. Community profiling revealed that the family Geobacteraceae was the key EAM taxon in all biofilms, with Geobacter as the dominant genus. The c-type cytochrome gene imcH showed universal importance for Geobacteraceae EET and was utilized as a marker gene to evaluate the EET potential of EAMs. Additionally, stress response functional genes were used to assess the stress resistance potential of Geobacter species. Comparative analysis of imcH gene abundance revealed that EAMs with comparable overall EET potential could be enriched from artificial and natural inocula (P > 0.05). However, quantification of stress response gene copy numbers in the genomes demonstrated that EAMs originating from natural inocula possessed superior stress resistance potential (196 vs. 163). Overall, this study provides novel perspectives on the inoculum effect in bioreactors and offers theoretical guidance for selecting inoculum in environmental engineering applications.

Mechanisms linking triclocarban biotransformation to functional response and antimicrobial resistome evolution in wastewater treatment systems.

Evaluating the role of antimicrobials biotransformation in the regulation of metabolic functions and antimicrobial resistance evolution in wastewater biotreatment systems is crucial to ensuring water security. However, the associated mechanisms remain poorly understood. Here, we investigate triclocarban (TCC, one of the typical antimicrobials) biotransformation mechanisms and the dynamic evolution of systemic function disturbance and antimicrobial resistance risk in a complex anaerobic hydrolytic acidification (HA)-anoxic (ANO)/oxic (O) process. We mined key functional genes involved in the TCC upstream (reductive dechlorination and amide bonds hydrolysis) and downstream (chloroanilines catabolism) biotransformation pathways by metagenomic sequencing. Acute and chronic stress of TCC inhibit the production of volatile fatty acids (VFAs), NH4+ assimilation, and nitrification. The biotransformation of TCC via a single pathway cannot effectively relieve the inhibition of metabolic functions (e.g., carbon and nitrogen transformation and cycling) and enrichment of antimicrobial resistance genes (ARGs). Importantly, the coexistence of TCC reductive dechlorination and hydrolysis pathways and subsequent ring-opening catabolism play a critical role for stabilization of systemic metabolic functions and partial control of antimicrobial resistance risk. This study provides new insights into the mechanisms linking TCC biotransformation to the dynamic evolution of systemic functions and risks, and highlights critical regulatory information for enhanced control of TCC risks in complex biotreatment systems.

Removal and assessment of cadmium contamination based on the toxic responds of a soil ciliate Colpoda sp.

Bioremediation of cadmium (Cd) pollution, a recognized low-carbon green environmental protection technology, is significantly enhanced by the discovery of Cd-tolerant microorganisms and their underlying tolerance mechanisms. This study presents Colpoda sp., a soil ciliate with widespread distribution, as a novel bioindicator and bioremediator for Cd contamination. With a 24 h-LC50 of 5.39 mg l-1 and an IC50 of 24.85 µg l-1 in Cd-contaminated water, Colpoda sp. achieves a maximum bioaccumulation factor (BAF) of 3.58 and a Cd removal rate of 32.98 ± 0.74 % within 96 h. The toxic responses of Colpoda sp. to Cd stress were assessed through cytological observation with transmission electron microscopy (TEM), oxidative stress kinase activity, and analysis of Cd-metallothionein (Cd-MTs) and the cd-mt gene via qRT-PCR. The integrated biomarker response index version 2 (IBRv2) and structural equation models (SEM) were utilized to analyze key factors and mechanisms, revealing that the up-regulation of Cd-MTs and cd-mt expression, rather than the oxidative stress system, is the primary determinant of Cd accumulation and tolerance in Colpoda sp. The ciliate's ability to maintain growth under 24.85 µg l-1 Cd stress and its capacity to absorb and accumulate Cd particles from water into cells are pivotal for bioremediation. A new mathematical formula and regression equations based on Colpoda sp.'s response parameters have been established to evaluate environmental Cd removal levels and design remediation schemes for contaminated sites. These findings provide a novel bioremediation and monitoring pathway for Cd remobilization and accumulation in soil and water, potentially revolutionizing the governance of Cd pollution.

Regulating microbial redox reactions towards enhanced removal of refractory organic nitrogen from wastewater.

Biotechnology for wastewater treatment is mainstream and effective depending upon microbial redox reactions to eliminate diverse contaminants and ensure aquatic ecological health. However, refractory organic nitrogen compounds (RONCs, e.g., nitro-, azo-, amide-, and N-heterocyclic compounds) with complex structures and high toxicity inhibit microbial metabolic activity and limit the transformation of organic nitrogen to inorganic nitrogen. This will eventually result in non-compliance with nitrogen discharge standards. Numerous efforts suggested that applying exogenous electron donors or acceptors, such as solid electrodes (electrostimulation) and limited oxygen (micro-aeration), could potentially regulate microbial redox reactions and catabolic pathways, and facilitate the biotransformation of RONCs. This review provides comprehensive insights into the microbial regulation mechanisms and applications of electrostimulation and micro-aeration strategies to accelerate the biotransformation of RONCs to organic amine (amination) and inorganic ammonia (ammonification), respectively. Furthermore, a promising approach involving in-situ hybrid anaerobic biological units, coupled with electrostimulation and micro-aeration, is proposed towards engineering applications. Finally, employing cutting-edge methods including multi-omics analysis, data science driven machine learning, technology-economic analysis, and life-cycle assessment would contribute to optimizing the process design and engineering implementation. This review offers a fundamental understanding and inspiration for novel research in the enhanced biotechnology towards RONCs elimination.

Homogenous Oxidizing Oligomerization Coupled with Coagulation for Water Purification.

Natural manganese oxides could induce the intermolecular coupling reactions among small-molecule organics in aqueous environments, which is one of the fundamental processes contributing to natural humification. These processes could be simulated to design novel advanced oxidation technology for water purification. In this study, periodate (PI) was selected as the supplementary electron-acceptor for colloidal manganese oxides (Mn(IV)aq) to remove phenolic contaminants from water. By introducing polyferric sulfate (PFS) into the Mn(IV)aq/PI system and exploiting the flocculation potential of Mn(IV)aq, a post-coagulation process was triggered to eliminate soluble manganese after oxidation. Under acidic conditions, periodate exists in the H4IO6- form as an octahedral oxyacid capable of coordinating with Mn(IV)aq to form bidentate complexes or oligomers (Mn(IV)-PI*) as reactive oxidants. The Mn(IV)-PI* complex could induce cross-coupling process between phenolic contaminants, resulting in the formation of oligomerized products ranging from dimers to hexamers. These oligomerized products participate in the coagulation process and become stored within the nascent floc due to their catenulate nature and strong hydrophobicity. Through coordination between Mn(IV)aq and H4IO6-, residual periodate is firmly connected with manganese oxides in the floc after coagulation and could be simultaneously separated from the aqueous phase. This study achieves oxidizing oligomerization through a homogeneous process under mild conditions without additional energy input or heterogeneous catalyst preparation. Compared to traditional mineralization-driven oxidation techniques, the proposed novel cascade processes realize transformation, convergence, and separation of phenolic contaminants with high oxidant utilization efficiency for low-carbon purification.

A pilot-scale anoxic-anaerobic-anoxic-oxic combined with moving bed biofilm reactor system for advanced treatment of rural wastewater.

Rural domestic poses a significant challenge to treatment technologies due to significant fluctuations in both water quality, particularly in terms of carbon concentration, and quantity. Conventional biological technology, such as anaerobic-anoxic-oxic (A2O) systems, is inefficient. In this work, a continuous pilot-scale anoxic-anaerobic-anoxic-oxic (A3O) reactor with a moving bed biofilm reactor (MBBR) system was constructed and optimized to improve the treatment efficiency of rural domestic wastewater. The sludge return ratio, volume ratio of the oxic-to-anoxic zone (Voxi/Vano), step-feeding and hydraulic retention time (HRT) at low temperature were considered the main parameters for optimization. Microbial analysis was performed on both the mixed liquor and carrier of the A3O-MBBR system under initial and post-optimized conditions. The results indicated that the A3O-MBBR improved the treatment efficiency of rural domestic wastewater, especially for total phosphorus (TP), which increased by 20 % compared with that of the A2O-MBR. In addition, the removal efficiencies of nitrogen and phosphorus were further optimized, and the average concentrations of total nitrogen (TN) and TP in the effluent reached 2.46 and 0.364 mg/L, respectively, at a sludge reflux ratio of 100 or 150 %, Voxi/Vano =200 %, step-feeding of 0.5Q/0.5Q (anaerobic/anoxic) and HRT of 15 h at low temperature in the A3O-MBBR, which met standard A of GB18918-2002, China (TN < 15 mg/L, TP < 0.5 mg/L). The average rate of attaining the standard increased by 58.63 % (post optimization). The microbial analysis showed an increase in species diversity and richness after the parameters were optimized. Moreover, compared to the microbial community structure before optimization, the post-optimization exhibited a more stable microbial structure with a significant enrichment of functional bacteria. Defluviimonas, Novosphingobium and Bifidobacterium, considered as the dominant nitrification or denitrifying bacteria, were enriched in the suspended sludge of the MBBR reactor, which the relative abundance increased by 3.11 %, 3.84 %, and 3.24 %, respectively. Further analysis of the microbial community in the carrier revealed that the abundance of Nitrospira and the denitrifying bacteria carried by the carrier were much greater than those in the suspended sludge. Consequently, the microorganism cooperation between suspended sludge and biofilm might be responsible for the improved performance of the optimized A3O-MBBR.

Multi-omics analysis of nitrifying sludge under carbon disulfide stress: Nitrification performance and molecular mechanisms.

Carbon disulfide (CS2) is a widely used enzyme inhibitor with cytotoxic properties, commonly employed in viscose fibers and cellophane production due to its non-polar characteristics. In industry, CS2 is often removed by aeration, however, residual CS2 may enter the wastewater treatment plants, impacting the performance of nitrifying sludge. Currently, there is a notable dearth of research on the response of nitrifying sludge to CS2-induced stress. This study delves into the alterations in the performance of nitrifying sludge under short-term and long-term CS2 stress, scrutinizes the toxic effects of CS2 on microbial cells, elucidates the succession of microbial community structure, and delineates changes in microbial metabolic products. The findings from short-term CS2 stress revealed that low concentrations of CS2 induced oxidative stress damage, which was subsequently repaired in cells. However, at concentrations of 100-200 mg/L, CS2 inhibited reactive oxygen species, superoxide dismutase, and catalase, which are associated with metabolic and antioxidant activities. The inhibition of nitrite oxidoreductase activity by high concentrations of CS2 was attributed to its impact on the enzyme's conformation. Prolonged CS2 stress resulted in an increase in the secretion of soluble extracellular polymeric substances in sludge, while CS2 was assimilated into sulfate. The analysis of sludge microbial community structure revealed a decline in the relative abundance of Rhodanobacter, which is associated with nitrification, and an increase in Sinomonas, involved in sulfur oxidation. Metabolite analysis results demonstrated that high concentrations of CS2 affect pantothenate and CoA biosynthesis, purine metabolism, and glutathione metabolism. This study elucidated the microbial response mechanism of nitrifying sludge under short-term and long-term CS2 stress. It also clarified the composition and function of microbial ecosystems, and identified key bacterial species and metabolites. It provides a basis for future research to reduce CS2 inhibition through approaches such as the addition of metal ions, the selection of efficient CS2-degrading strains, and the modification of strain metabolic pathways.

PAHs removal by soil washing with thiacalix[4]arene tetrasulfonate.

Remediating soil contaminated with polycyclic aromatic hydrocarbons (PAHs) presents a significant environmental challenge due to their toxic and carcinogenic properties. Traditional PAHs remediation methods-chemical, thermal, and bioremediation-along with conventional soil-washing agents like surfactants and cyclodextrins face challenges of cost, ecological harm, and inefficiency. Here we show an effective and environmentally friendly calixarene derivative for PAHs removal through soil washing. Thiacalix[4]arene tetrasulfonate (TCAS) has a unique molecular structure of a sulfonate group and a sulfur atom, which enhances its solubility and facilitates selective binding with PAHs. It forms host-guest complexes with PAHs through π-π stacking, OH-π interactions, hydrogen bonding, van der Waals forces, and electrostatic interactions. These interactions enable partial encapsulation of PAH molecules, aiding their desorption from the soil matrix. Our results show that a 0.7% solution of TCAS can extract approximately 50% of PAHs from contaminated soil while preserving soil nutrients and minimizing adverse environmental effects. This research unveils the pioneering application of TCAS in removing PAHs from contaminated soil, marking a transformative advancement in resource-efficient and sustainable soil remediation strategies.

Microbial interactions facilitating efficient methane driven denitrification via in-situ utilization of short chain fatty acids.

High nitrate pollution in agriculture and industry poses a challenge to emerging methane oxidation coupled denitrification. In this study, an efficient nitrate removal efficiency of 100 % was achieved at an influent loading rate of 400 mg-N/L·d, accompanied by the production of short chain fatty acids (SCFAs) with a maximum value of 80.9 mg/L. Batch tests confirmed that methane was initially converted to acetate, which then served as a carbon source for denitrification. Microbial community characterization revealed the dominance of heterotrophic denitrifiers, including Simplicispira (22.8 %), Stappia (4.9 %), and the high­nitrogen-tolerant heterotrophic denitrifier Diaphorobacter (19.0 %), at the nitrate removal rate of 400 mg-N/L·d. Notably, the low abundance of methanotrophs ranging from 0.24 % to 3.75 % across all operational stages does not fully align with the abundance of pmoA genes, suggesting the presence of other functional microorganisms capable of methane oxidation and SCFAs production. These findings could facilitate highly efficient denitrification driven by methane and contributed to the development of denitrification using methane as an electron donor.

Deciphering carbon emissions in urban sewer networks: Bridging urban sewer networks with city-wide environmental dynamics.

As urbanization accelerates, understanding and managing carbon emissions from urban sewer networks have become crucial for sustainable urban water cycles. This review examines the factors influencing greenhouse gas (GHG) emissions within urban sewage systems, analyzing the complex effects between water quality, hydrodynamics, and sewer infrastructure on GHG production and emission processes. It reveals significant spatiotemporal heterogeneity in GHG emissions, particularly under long-term scenarios where flow rates and temperatures exhibit strong impacts and correlations. Given the presence of fugitive and dissolved potential GHGs, standardized monitoring and accounting methods are deemed essential. Advanced modeling techniques emerge as crucial tools for large-scale carbon emission prediction and management. The review identifies that traditional definitions and computational frameworks for carbon emission boundaries fail to fully consider the inherent heterogeneity of sewers and the dynamic changes and impacts of multi-source pollution within the sewer system during the urban water cycle. This includes irregular fugitive emissions, the influence of stormwater systems, climate change, geographical features, sewer design, and the impacts of food waste and antibiotics. Key strategies for emission management are discussed, focusing on the need for careful consideration of approaches that might inadvertently increase global emissions, such as ventilation, chemical treatments, and water management practices. The review advocates for an overarching strategy that encompasses a holistic view of carbon emissions, stressing the importance of refined emission boundary definitions, novel accounting practices, and comprehensive management schemes in line with the water treatment sector's move towards carbon neutrality. It champions the adoption of interdisciplinary, technologically advanced solutions to mitigate pollution and reduce carbon emissions, emphasizing the importance of integrating cross-scale issues and other environmentally friendly measures in future research directions.

Alterations of the cerebral microstructure in patients with noise-induced hearing loss: A diffusion tensor imaging study.

OBJECTIVE: To explore the changes in the cerebral microstructure of patients with noise-induced hearing loss (NIHL) using diffusion tensor imaging (DTI). METHOD: Overall, 122 patients with NIHL (mild [MP, n = 79], relatively severe patients [including moderate and severe; RSP, n = 32], and undetermined [lost to follow-up, n = 11]) and 84 healthy controls (HCs) were enrolled. All clinical data, including age, education level, hearing threshold, occupation type, noise exposure time, and some scale scores (including the Mini-Mental State Examination [MMSE], tinnitus handicap inventory [THI], and Hamilton Anxiety Scale [HAMA]), were collected and analyzed. All participants underwent T1WI3DFSPGR and DTI, and tract-based spatial statistics and region of interest (ROI) analysis were used for assessment. RESULTS: The final sample included 71 MP, 28 RSP, and 75 HCs. The HAMA scores of the three groups were significantly different (p < .05). The noise exposure times, hearing thresholds, and HAMA scores of the MP and RSP were significantly different (p < .05). The noise exposure time was positively correlated with the hearing threshold and negatively correlated with the HAMA scores (p < .05), whereas the THI scores were positively correlated with the hearing threshold (p < .05). DTI analysis showed that all DTI parameters (fractional anisotropy [FA], axial diffusivity [AD], mean diffusivity [MD], and radial diffusivity [RD]) were significantly different in the left inferior longitudinal fasciculus (ILF) and left inferior fronto-occipital fasciculus (IFOF) for the three groups (p < .05). In addition, the FA values were significantly lower in the bilateral corticospinal tract (CST), right fronto-pontine tract (FPT), right forceps major, left superior longitudinal fasciculus (temporal part) (SLF), and left cingulum (hippocampus) (C-H) of the MP and RSP than in those of the HCs (p < .05); the AD values showed diverse changes in the bilateral CST, left IFOF, right anterior thalamic radiation, right external capsule (EC), right SLF, and right superior cerebellar peduncle (SCP) of the MP and RSP relative to those of the HC (p < .05). However, there were no significant differences among the bilateral auditory cortex ROIs of the three groups (p > .05). There was a significant negative correlation between the FA and HAMA scores for the left IFOF/ILF, right FPT, left SLF, and left C-H for the three groups (p < .05). There was a significant positive correlation between the AD and HAMA scores for the left IFOF/ILF and right EC of the three groups (p < .05). There were significantly positive correlations between the RD/MD and HAMA scores in the left IFOF/ILF of the three groups (p < .05). There was a significant negative correlation between the AD in the right SCP and noise exposure time of the MP and RSP groups (p < .05). The AD, MD, and RD in the left ROI were significantly positively correlated with hearing threshold in the MP and RSP groups (p < .05), whereas FA in the right ROI was significantly positively correlated with the HAMA scores for the three groups (p < .05). CONCLUSION: The changes in the white matter (WM) microstructure may be related to hearing loss caused by noise exposure, and the WM structural abnormalities in patients with NIHL were mainly located in the syndesmotic fibers of the temporooccipital region, which affected the auditory and language pathways. This confirmed that the auditory pathways have abnormal structural connectivity in patients with NIHL.

Electrical stress and acid orange 7 synergistically clear the blockage of electron flow in the methanogenesis of low-strength wastewater.

Energy recovery from low-strength wastewater through anaerobic methanogenesis is constrained by limited substrate availability. The development of efficient methanogenic communities is critical but challenging. Here we develop a strategy to acclimate methanogenic communities using conductive carrier (CC), electrical stress (ES), and Acid Orange 7 (AO7) in a modified biofilter. The synergistic integration of CC, ES, and AO7 precipitated a remarkable 72-fold surge in methane production rate compared to the baseline. This increase was attributed to an altered methanogenic community function, independent of the continuous presence of AO7 and ES. AO7 acted as an external electron acceptor, accelerating acetogenesis from fermentation intermediates, restructuring the bacterial community, and enriching electroactive bacteria (EAB). Meanwhile, CC and ES orchestrated the assembly of the archaeal community and promoted electrotrophic methanogens, enhancing acetotrophic methanogenesis electron flow via a mechanism distinct from direct electrochemical interactions. The collective application of CC, ES, and AO7 effectively mitigated electron flow impediments in low-strength wastewater methanogenesis, achieving an additional 34% electron recovery from the substrate. This study proposes a new method of amending anaerobic digestion systems with conductive materials to advance wastewater treatment, sustainability, and energy self-sufficiency.

H*ads dynamics engineering via bimetallic Pd-Cu@MXene catalyst for enhanced electrocatalytic hydrodechlorination.

Electrocatalytic hydrodechlorination (EHDC) is a promising approach to safely remove halogenated emerging contaminants (HECs) pollutants. However, sluggish production dynamics of adsorbed atomic H (H*ads) limit the applicability of this green process. In this study, bimetallic Pd-Cu@MXene catalysts were synthesized to achieve highly efficient removal of HECs. The alloy electrode (Pd-Cu@MX/CC) exhibited better EHDC performance in comparison to Pd@MX/CC electrode, resulting in diclofenac degradation efficiency of 93.3 ± 0.1%. The characterization analysis revealed that the Pd0/PdII ratio decreased by forming bimetallic Pd-Cu alloy. Density functional theory calculations further demonstrated the electronic configuration modulation of the Pd-Cu@MXene catalysts, optimizing binging energies for H* and thereby facilitating H*ads production and tuning the reduction capability of H*ads. Noteably, the amounts and reduction potential of H*ads for Pd-Cu@MXene catalysts were 1.5 times higher and 0.37 eV lower than those observed for the mono Pd electrode. Hence, the introduction of Cu into the Pd catalyst optimized the dynamics of H*ads production, thereby conferring significant advantages to EHDC reactions. This augmentation was underscored by the successful application of the alloy catalysts supported by MXene in EHDC experiments involving other HECs, which represented a new paradigm for EHDC for efficient recalcitrant pollutant removal by H*ads.