ABSTRACT
Fundamental knowledge about cell-surface interactions can be applied in the development of wound dressings and scaffolds to encourage wounds to heal. As surfaces produced with acid-functionalised monomers encourage keratinocyte adhesion, proliferation and migration, whilst amine functionalisation enhances fibroblast proliferation and migration in vitro, standard care wound dressings were plasma-coated with either acrylic acid or allylamine and applied to 6 mm excisional wounds on the backs of mice to test their effectiveness in vivo. At day 3, the rate of wound healing was increased in mice treated with dressings that were plasma-coated with allylamine compared to uncoated dressings, with a significantly reduced wound area. However, healing may be impaired following prolonged treatment with allylamine-functionalised dressings, with delayed re-epithelialisation and increased cellularisation of the wound site at later timepoints. Acrylic acid functionalisation, however, offered no early improvement in wound healing, but wounds treated with these dressings displayed increased collagen deposition at day 7 post wounding. These results suggest that plasma polymerisation may allow for the development of new dressings which can enhance wound closure by directing cell behaviour, but that the application of these dressings may require a timed approach to enhance specific phases of the wound healing response.
Subject(s)
Bandages , Wound Healing , Mice , Animals , Acrylates/pharmacology , CollagenABSTRACT
Advances in cellular reprogramming have radically increased the use of patient-derived cells for neurological research in vitro. However, adherence of human neurons on tissue cultureware is unreliable over the extended periods required for electrophysiological maturation. Adherence issues are particularly prominent for transferable glass coverslips, hindering imaging and electrophysiological assays. Here, we assessed thin-film plasma polymer treatments, polymeric factors, and extracellular matrix coatings for extending the adherence of human neuronal cultures on glass. We find that positive-charged, amine-based plasma polymers improve the adherence of a range of human brain cells. Diaminopropane (DAP) treatment with laminin-based coating optimally supports long-term maturation of fundamental ion channel properties and synaptic activity of human neurons. As proof of concept, we demonstrated that DAP-treated glass is ideal for live imaging, patch-clamping, and optogenetics. A DAP-treated glass surface reduces the technical variability of human neuronal models and enhances electrophysiological maturation, allowing more reliable discoveries of treatments for neurological and psychiatric disorders.
Subject(s)
Induced Pluripotent Stem Cells , Amines , Brain , Humans , Neurons , PolymersABSTRACT
If plasma polymer thin films are to be synthesised from sustainable and natural precursors of chemically heterogeneous composition, it is important to understand the extent to which this composition influences the mechanism of polymerisation. To this end, a well-studied monoterpene alcohol, terpinen-4-ol, has been targeted for a comparative study with the naturally occurring mix of terpenes (viz. Melaleuca alternifolia oil) from which it is commonly distilled. Positive ion mode mass spectra of both terpinen-4-ol and M. alternifolia oil showed a decrease in disparities between the type and abundance of cationic species formed in their respective plasma environments as applied plasma power was increased. Supplementary biological assay revealed the antibacterial action of both terpinen-4-ol and M. alternifolia derived coatings with respect to S. aureus bacteria, whilst cytocompatibility was demonstrated by comparable eukaryotic cell adhesion to both coatings. Elucidating the processes occurring within the reactive plasmas can enhance the economics of plasma polymer deposition by permitting use of the minimum power, time and precursor pre-processing required to control the extent of monomer fragmentation and fabricate a film of the desired thickness and functionality.
Subject(s)
Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Biological Products/chemistry , Plasma Gases/chemistry , Staphylococcus aureus/drug effects , Terpenes/chemistry , Terpenes/pharmacology , Melaleuca/chemistryABSTRACT
Flexible supercapacitors are promising energy storage devices for emerging wearable electronics. However, due to the poor mechanical strength, complicated device manufacturing process, and unsatisfactory low-temperature tolerance, their overall performance for practical applications is hindered. Herein, we report a hydrogen bonding-reinforced, dual-crosslinked poly(vinyl alcohol), acrylic acid, and H2SO4 (PVA-AA-S) hydrogel electrolyte for all-in-one flexible supercapacitors. The PVA-AA-S hydrogel demonstrates excellent compressive/tensile properties and high ionic conductivity. It tolerates compressive stress of 0.53 MPa and is stretchable up to 500%. The hydrogel-based all-in-one supercapacitor shows promising electrochemical performance under various harsh conditions. The device energy density and power density reach up to 14.2 µWh cm-2 and 0.94 mW cm-2, respectively. Furthermore, it retains nearly 80% capacitance after being stored at -35 °C for 23 days. The excellent performance of the hydrogel electrolyte originates from its abundant strong hydrogen bonding between polymer chains and water molecules.
ABSTRACT
Plant metabolites that have shown activity against bacteria and/or environmental fungi represent valuable leads for the identification and development of novel drugs against clinically important human pathogenic fungi. Plants from the genus Eremophila were highly valued in traditional Australian Aboriginal medicinal practices, and E. alternifolia was the most prized among them. As antibacterial activity of extracts from E. alternifolia has been documented, this study addresses the question whether there is also activity against infectious fungal human pathogens. Compounds from leaf-extracts were purified and identified by 1- and 2-D NMR. These were then tested by disk diffusion and broth microdilution assays against ten clinically and environmentally relevant yeast and mould species. The most potent activity was observed with the diterpene compound, 8,19-dihydroxyserrulat-14-ene against Cryptococcus gattii and Cryptococcus neoformans, with minimum inhibition concentrations (MIC) comparable to those of Amphotericin B. This compound also exhibited activity against six Candida species. Combined with previous studies showing an antibacterial effect, this finding could explain a broad antimicrobial effect from Eremophila extracts in their traditional medicinal usage. The discovery of potent antifungal compounds from Eremophila extracts is a promising development in the search for desperately needed antifungal compounds particularly for Cryptococcus infections.
ABSTRACT
Human Mesenchymal Stem cells (hMSCs) are becoming a major focus in biomedical fields. Application of in vitro expanded hMSCs to treat numerous ailments has led to a commercial emphasis on improving hMSC growth ex vivo. Production of substrate independent, novel thin films is one potential tool for production of commercial viable hMSC expansion. Plasma polymerization allow controlled chemical optimisation of large scale surface areas in a substrate independent manner. Previous study shown that plasma polymerized Furfuryl Methacrylate (ppFMA) surfaces allowed primary fibroblast cells adhesion and proliferation. However, under some deposition conditions, particle aggregates formation was observed. These aggregates had the effect of disrupting cell attachment, despite being chemically indistinguishable from the underlying surface. Herein, hMSCs were cultured on ppFMA surfaces to determine their suitability for stem cell culture and observe the effect of particle aggregates on hMSC attachment and growth. Both metabolic and DNA quantification assays showed that surfaces with particle aggregates had lower numbers of attached cells and slower growth. Uniform surfaces without aggregates showed higher cell attachment and growth levels, which were comparable to Thermanox. Phenotypic analysis showed that there was no change to hMSCs phenotype after 7 & 14days of culture on uniform ppFMA surface. Further investigation using time-lapse image analysis indicated that particle aggregates reduced cell attachment by presenting a physically weak boundary layer, which was damaged by intracellular tension during cell spreading. ppFMA surface can provide a stable substrate independent hMSCs expansion interface that could be applied to larger scale bioreactors, beads or scaffolds.
Subject(s)
Cell Proliferation , Furans/chemistry , Mesenchymal Stem Cells/cytology , Methacrylates/chemistry , Polymerization , Cell Adhesion , Cell Culture Techniques/methods , Cells, Cultured , Humans , Mesenchymal Stem Cells/metabolism , Microscopy, Confocal , Microscopy, Electron, Scanning , Particle Size , Photoelectron Spectroscopy , Surface Properties , Time-Lapse Imaging/methodsABSTRACT
Functionalizing medical devices with polypeptides to enhance their performance has become important for improved clinical success. The extracellular matrix (ECM) adhesion protein vitronectin (VN) is an effective coating, although the chemistry used to attach VN often reduces its bioactivity. In vivo, VN binds the ECM in a sequence-dependent manner with heparan sulfate (HS) glycosaminoglycans. We reasoned therefore that sequence-based affinity chromatography could be used to isolate a VN-binding HS fraction (HS9) for use as a coating material to capture VN onto implant surfaces. Binding avidity and specificity of HS9 were confirmed by enzyme-linked immunosorbent assay (ELISA) and surface plasmon resonance (SPR)-based assays. Plasma polymerization of allylamine (AA) to tissue culture-treated polystyrene (TCPS) was then used to capture and present HS9 as determined by radiolabeling and ELISA. HS9-coated TCPS avidly bound VN, and this layered surface supported the robust attachment, expansion, and maintenance of human pluripotent stem cells. Compositional analysis demonstrated that 6-O- and N-sulfation, as well as lengths greater than three disaccharide units (dp6) are critical for VN binding to HS-coated surfaces. Importantly, HS9 coating reduced the threshold concentration of VN required to create an optimally bioactive surface for pluripotent stem cells. We conclude that affinity-purified heparan sugars are able to coat materials to efficiently bind adhesive factors for biomedical applications. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1887-1896, 2018.
Subject(s)
Coated Materials, Biocompatible/chemistry , Extracellular Matrix Proteins/chemistry , Heparitin Sulfate/chemistry , Pluripotent Stem Cells/metabolism , Vitronectin/chemistry , Cell Adhesion , Cell Line , Humans , Pluripotent Stem Cells/cytologyABSTRACT
This review aims to provide a broad introduction to the use of cell sheets and the role of materials in the delivery of cell sheets to patients within a clinical setting. Traditionally, cells sheets have been, and currently are, fabricated using established and accepted cell culture methods within standard formats (e.g., petri dishes) utilizing biological substrates. Synthetic surfaces provide a far more versatile system for culturing and delivering cell sheets. This has the potential to positively affect quality, and efficient, localized cell delivery has a significant impact on patient outcome and on the overall cost of goods. We highlight current applications of these advanced carriers and future applications of these surfaces and cell sheets with an emphasis both on clinical use and regulatory requirements.
Subject(s)
Cell Culture Techniques/methods , Cell- and Tissue-Based Therapy/methods , Animals , Cells, Cultured , Humans , Stem Cell TransplantationABSTRACT
Skin has a remarkable capacity for regeneration; however, with an ever aging population, there is a growing burden to the healthcare system from chronic wounds. Novel therapies are required to address the problems associated with nonhealing chronic wounds. Novel wound dressings that can encourage increased reepithelialization could help to reduce the burden of chronic wounds. A suite of chemically defined surfaces have been produced using plasma polymerization, and the ability of these surfaces to support the growth of primary human skin cells has been assessed. Additionally, the ability of these surfaces to modulate cell migration and morphology has also been investigated. Keratinocytes and endothelial cells were extremely sensitive to surface chemistry showing increased viability and migration with an increased number of carboxylic acid functional groups. Fibroblasts proved to be more tolerant to changes in surface chemistry; however, these cells migrated fastest over amine-functionalized surfaces. The novel combination of comprehensive chemical characterization coupled with the focus on cell migration provides a unique insight into how a material's physicochemical properties affect cell migration.
Subject(s)
Coated Materials, Biocompatible/chemistry , Coated Materials, Biocompatible/pharmacology , Plasma Skin Regeneration/methods , Wound Healing/physiology , Wounds and Injuries/therapy , Acrylates/chemistry , Acrylates/pharmacology , Alkenes/chemistry , Alkenes/pharmacology , Cell Movement/physiology , Cell Survival/physiology , Chemotaxis , Endothelial Cells/cytology , Endothelial Cells/drug effects , Fibroblasts/cytology , Fibroblasts/drug effects , Humans , Keratinocytes/cytology , Keratinocytes/drug effects , Propanols/chemistry , Propanols/pharmacology , Skin/cytology , Skin/drug effects , Surface Properties , Wounds and Injuries/pathologyABSTRACT
Furfuryl methacrylate (FMA) is a promising precursor for producing polymers for biomedical and cell therapy applications. Herein, FMA plasma polymer coatings were prepared with different powers, deposition times, and flow rates. The plasma polymer coatings were characterized using atomic force microscopy (AFM), scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results from AFM and SEM show the early growth of the coatings and the existence of particle aggregates on the surfaces. XPS results indicated no measureable chemical differences between the deposited films produced under different power and flow rate conditions. ToF-SIMS analysis demonstrated differing amounts of C5H5O (81 m/z) and C10H9O2 (161 m/z) species in the coatings which are related to the furan ring structure. Through judicious choice of plasma polymerization parameters, the quantity of the particle aggregates was reduced, and the fabricated plasma polymer coatings were chemically uniform and smooth. Primary human fibroblasts were cultured on FMA plasma polymer surfaces to determine the effect of surface chemical composition and the presence of particle aggregates on cell culture. Particle aggregates were shown to inhibit fibroblast attachment and proliferation.
Subject(s)
Coated Materials, Biocompatible , Furans/metabolism , Methacrylates/metabolism , Polymers/metabolism , Cell Adhesion , Cell Proliferation , Cells, Cultured , Fibroblasts/physiology , Humans , Microscopy, Atomic Force , Microscopy, Electron, Scanning , Photoelectron Spectroscopy , Spectrometry, Mass, Secondary Ion , Surface PropertiesABSTRACT
Active dressings that based on fabric materials are an area of interest for the treatment of wounds. Poly(l-lactide) nanoparticles containing the antimicrobial agent octenidine can be controllably lysed by toxins released by pathogenic bacteria thus releasing antimicrobial material in response to the presence of the bacterial toxins and so counteracting the infection. We developed an integrated engineering solution that allows for the stable immobilisation of nanoparticles on non-woven fabrics. The process involves coating nanoparticles on non-woven polymer surfaces by using an inkjet printing process. In order to improve the adhesion and retention of the nanoparticles on the fabric, surface pretreatment of the non-woven fabric using plasma jet treatment can be applied to increase its surface energy.
Subject(s)
Anti-Infective Agents , Nanoparticles/chemistry , Polyesters , Printing , Pyridines , Textiles , IminesABSTRACT
Age related macular degeneration of the eye is brought about by damage to the retinal pigment epithelium (RPE) and is a major cause of adult blindness. One potential treatment method is transplantation of RPE cells grown in vitro. Maintaining RPE cell viability and physiological function in vitro is a challenge, and this must also be achieved using materials that can be subsequently used to deliver an intact cell sheet into the eye. In this paper, plasma polymerisation has been used to develop a chemically modified surface for maintaining RPE cells in vitro. Multiwell plates modified with a plasma copolymer of allylamine and octadiene maintained RPE cell growth at a level similar to that of TCPS. However, the addition of bound glycosaminoglycans (GAGs) to the plasma polymerised surface significantly enhanced RPE proliferation. Simply adding GAG to the culture media had no positive effect. It is shown that a combination of plasma polymer and GAG is a promising method for developing suitable surfaces for cell growth and delivery, that can be applied to any substrate material.
Subject(s)
Biocompatible Materials/chemical synthesis , Glycosaminoglycans/chemistry , Glycosaminoglycans/pharmacokinetics , Retinal Pigment Epithelium/cytology , Retinal Pigment Epithelium/growth & development , Serum/metabolism , Tissue Engineering/methods , Adsorption , Cell Line , Cell Proliferation/physiology , Epithelial Cells/cytology , Epithelial Cells/physiology , Humans , Materials TestingABSTRACT
Growth factors (GFs) play an important role in biological processes such as cell proliferation, differentiation and angiogenesis. GFs are known to bind to glycosaminoglycans (GAGs) in the extracellular matrix, aiding projection from degradation and pooling the GFs for quick response to biological stimuli in vivo. GFs are typically expensive and have a relatively short half-life in culture media, requiring regular replenishment. Here the cooperative binding of GF to a plasma polymerised surface decorated with heparin, and the subsequent culture of primary human dermal fibroblasts (HDFs) is investigated. A simple one-step technique suitable for coating a wide range of different substrates was utilised. Substrates such as culture-ware, scaffolds, bandages and devices for implantation could be coated. The modified surface was compared to standard culture techniques of addition of GF to the media. Results demonstrate that surface bound heparin and FGF-2 have a greater effect on cell proliferation especially at reduced serum concentrations. With performance equivalent to supplementing the media achieved at as little as 1% total FGF-2 added. The protective cooperative effect of FGF-2-GAG bound to modified surface at the interface could lead to reduced costs by reduction of FGF-2 required. Furthermore, for applications such as chronic non-healing wounds, bandages can be produced modified by plasma and decorated with GAGs that could utilise and protect important GFs. This would effectively re-introduce important biomolecules which are protected by GAG binding into a harsh environment.
ABSTRACT
External parameters (RF power and precursor flow rate) are typically quoted to define plasma polymerization experiments. Utilizing a parallel-plate electrode reactor with variable geometry, it is shown that these parameters cannot be transferred to reactors with different geometries in order to reproduce plasma polymer films using four precursors. Measurements of ion flux and power coupling efficiency confirm that intrinsic plasma properties vary greatly with reactor geometry at constant applied RF power. It is further demonstrated that controlling intrinsic parameters, in this case the ion flux, offers a more widely applicable method of defining plasma polymerization processes, particularly for saturated and allylic precursors.
ABSTRACT
It has been shown that both ions and neutral species may contribute to plasma polymer growth. However, the relative contribution from these mechanisms remains unclear. We present data elucidating the importance of considering monomer structure with respect to which the growth mechanism dominates for nonfouling PEG-like plasma polymers. The deposition rate for saturated monomers is directly linked with ion flux to the substrate. For unsaturated monomers, the neutral flux also plays a role, particularly at low power. Increased fragmentation of the monomer at high power reduces the ability of unsaturated monomers to grow via neutral grafting. Chemical characterization by X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) confirm the role that plasma phase fragmentation plays in determining the deposition rate and surface chemistry of the deposited film. The simple experimental method used here may also be used to determine which mechanisms dominate plasma deposition for other monomers. This knowledge may enable significant improvement in future reactor design and process control.
Subject(s)
Polymers/chemistry , Molecular Structure , Polymers/chemical synthesis , Spectrometry, Mass, Secondary Ion , Spectrophotometry , Surface Properties , Time Factors , X-RaysABSTRACT
As our understanding of what guides the behavior of multi- and pluripotent stem cells deepens, so too does our ability to utilize certain cues to manipulate their behavior and maximize their therapeutic potential. Engineered, biologically functionalized materials have the capacity to influence stem cell behavior through a powerful combination of biological, mechanical, and topographical cues. Here, we present the development of a novel electrospun scaffold, functionalized with glycosaminoglycans (GAGs) ionically immobilized onto the fiber surface. Bound GAGs retained the ability to interact with GAG-binding molecules and, crucially, presented GAG sulfation motifs fundamental to mediating stem cell behavior. Bound GAG proved to be biologically active, rescuing the neural differentiation capacity of heparan sulfate-deficient mouse embryonic stem cells and functioning in concert with FGF4 to facilitate the formation of extensive neural processes across the scaffold surface. The combination of GAGs with electrospun scaffolds creates a biomaterial with potent applicability for the propagation and effective differentiation of pluripotent stem cells.
Subject(s)
Cell Culture Techniques/methods , Embryonic Stem Cells/cytology , Heparitin Sulfate/metabolism , Allylamine/chemistry , Animals , Biocompatible Materials/chemistry , Cell Differentiation , Cells, Cultured , Disaccharides/chemistry , Epitopes/chemistry , Glycosaminoglycans/chemistry , Glycosaminoglycans/metabolism , Intercellular Signaling Peptides and Proteins/metabolism , Mice , Mice, Transgenic , Oligosaccharides/chemistry , Peptide Library , Polymers/chemistry , Regeneration , Regenerative Medicine/methodsABSTRACT
Glycosaminoglycans play an important role in tissue organisation through interactions with a diverse range of proteins, growth factors and other chemokines. In this report, we demonstrate the GAG-binding 'fingerprint' of two important GAG-binding proteins - osteoprotogerin and TIMP-3. The technique uses a straightforward method for attaching GAGs to assay surfaces in a non-covalent manner using plasma polymerization that leaves the adsorbed GAG able to participate in subsequent ligand binding. We show that OPG and TIMP-3 bind preferentially to different GAGs in a simple ELISA and that this binding does not correlate directly with simple GAG properties such as degree of sulfation. The methods outlined in this report can be easily applied to tissue engineering scaffolds in order to exploit the potential of surface-bound GAGs in influencing the structure of engineered tissues.
Subject(s)
Glycosaminoglycans/metabolism , Osteoprotegerin/metabolism , Tissue Inhibitor of Metalloproteinase-3/metabolism , Heparin/metabolism , Humans , Polymerization , Protein BindingABSTRACT
The interactions of glycosaminoglycans (GAGs) with proteins underlie a wide range of important biological processes. However, the study of such binding reactions has been hampered by the lack of a simple frontline analysis technique. Previously, we have reported that cold plasma polymerization can be used to coat microtiter plate surfaces with allyl amine to which GAGs (e.g., heparin) can be noncovalently immobilized retaining their ability to interact with proteins. Here, we have assessed the capabilities of surface coats derived from different ratios of allyl amine and octadiene (100:0 to 0:100) to support the binding of diverse GAGs (e.g., chondroitin-4-sulfate, dermatan sulfate, heparin preparations, and hyaluronan) in a functionally active state. The Link module from TSG-6 was used as a probe to determine the level of functional binding because of its broad (and unique) specificity for both sulfated and nonsulfated GAGs. All of the GAGs tested could bind this domain following their immobilization, although there were clear differences in their protein-binding activities depending on the surface chemistry to which they were adsorbed. On the basis of these experiments, 100% allyl amine was chosen for the generation of a microtiter plate-based "sugar array"; X-ray photoelectron spectroscopy revealed that similar relative amounts of chondroitin-4-sulfate, dermatan sulfate, and heparin (including two selectively de-sulfated derivatives) were immobilized onto this surface. Analysis of four unrelated proteins (i.e., TSG-6, complement factor H, fibrillin-1, and versican) illustrated the utility of this array to determine the GAG-binding profile and specificity for a particular target protein.
Subject(s)
Glycomics/instrumentation , Glycomics/methods , Glycosaminoglycans/chemistry , Glycosaminoglycans/metabolism , Lectins/metabolism , Microarray Analysis , Allylamine/chemistry , Animals , Cell Adhesion Molecules/chemistry , Cell Adhesion Molecules/metabolism , Complement Factor H/chemistry , Complement Factor H/metabolism , Fibrillin-1 , Fibrillins , Heparin/chemistry , Heparin/metabolism , Humans , Lectins/analysis , Lectins/isolation & purification , Microarray Analysis/instrumentation , Microarray Analysis/methods , Microfilament Proteins/chemistry , Microfilament Proteins/metabolism , Microtechnology/instrumentation , Microtechnology/methods , Protein Binding , Substrate Specificity , Surface Properties , Swine , Versicans/chemistry , Versicans/metabolismABSTRACT
We describe a method to produce antibody-captured ligand gradients over biologically relevant distances (hundreds of micrometers) whereby the ligand density and gradient shape may be tailored. Separation of the ligand from the solid-phase surface ensures that the biological activity of the ligand remains unaffected by immobilization. Our method involves the use of a plasma-masking method to generate a surface chemical gradient on a glass substrate to which the 9E10 antibody is covalently coupled. This antibody captures myc-tagged biomolecules. In our example, the antibody is then used to immobilize a gradient of the intercellular signaling molecule delta-like-1 (Dll1). To visualize the gradient of Dll1, we have used the multistep approach of binding with rabbit anti-Dll1 primary antibody and then adding colloidal-gold-conjugated secondary antibody.
Subject(s)
Proteins/chemistry , Acrylates/chemistry , Antibodies/chemistry , Biocompatible Materials , Calcium-Binding Proteins , Carbodiimides/chemistry , Fluorescent Dyes/chemistry , Glass , Hot Temperature , Humans , Immunohistochemistry/methods , Intercellular Signaling Peptides and Proteins/chemistry , Ligands , Membrane Proteins/chemistry , Pressure , Signal Transduction , Surface PropertiesABSTRACT
The interaction of heparan sulfate (HS) with specific proteins facilitates a wide range of fundamental biological processes including cellular proliferation and differentiation, tissue homeostasis, and viral pathogenesis. This multiplicity of function arises through sequence diversity within the HS chain. Heparin, which is very similar in structure to the sulfated regions of HS, is an excellent model for studying HS-protein interactions. The development of high-throughput enzyme-linked immunosorbent-like assays using surface-immobilized heparin has been hindered by the inability of this glycosaminoglycan to adhere to microtiter surfaces. Here we report the passive noncovalent adsorption of heparin onto microtiter wells following their treatment by plasma polymerization; there was no detectable binding of functional heparin onto untreated plates. Heparin immobilized in this way was able to interact with four different heparin-binding proteins tested, i.e., TSG-6, chemokines IL-8 and KC, and complement factor H. Heparin preparations ranging in size from high molecular weight to a defined decasaccharide could be adsorbed onto these plates in a functionally active form. Since plasma polymerization is possible for virtually any surface, this technique is likely to be of general use in the identification and characterization of heparin/HS-binding proteins in a wide range of applications.