ABSTRACT
As the contamination and enrichment in food chain of levofloxacin (LV) antibiotics have caused a significant threat to life safety, the instant detection of LV has become an urgent need. Here, a PDI-functionalized imine-based covalent organic framework (PDI-COF300) was prepared by the electrostatic self-assembly method as fluorescent probe for smartphone visual detection of LV, which exhibited excellent fluorescence quantum yield (82.68%), greater stability, high sensitivity with detection limit of 0.303 µM. Based on the results of molecular docking and Stern-Volmer equation, the LV detection by PDI-COF300 was mainly a static quenching process through π-π stacked hydrophobic interactions and fluorescence resonance energy transfer. Besides, PDI-COF300 was applied to LV detection in environmental medium and milk samples with recoveries from 85.56% to 108.34% and relative standard deviations <2.70%. This work also provided a new general strategy for using PDI-COF in smartphone devices and fluorescent papers for LV fluorescence detection and microanalysis.
ABSTRACT
Host-less lithium metal anode generally suffers from large volume changes and serious dendrite growth during cycling, which poses challenges for its practical application. Interpenetrating phase composites with continuous architectures offer a solution to enhance mechanical properties of materials. Herein, a robust composite Li anode (LBN) material is fabricated through the metallurgical reaction between Li and hexagonal boron nitride (h-BN) with the formation of interpenetrating LiB/Li3BN2 phases. As LiB fibers are anchored by Li3BN2 granules, the collapse and slippage of LiB fibers are suppressed whilst the mechanical strength and structural stability of LBN are reinforced. By rolling, ultrathin (15 µm), freestanding, and electrochemically stable LBN foil can be obtained. The LBN anode exhibits a high average Coulombic efficiency of 99.69% (1 mA cm-2, 3 mAh cm-2) and a long lifespan of 2500 h (1 mA cm-2, 1 mAh cm-2). Notably, the LiCoO2 (with double-sided load 40 mg cm-2)|LBN pouch cell can operate over 450 cycles with a capacity retention of 90.1%. The exceptional cycling stability of LBN can be ascribed to the interpenetrating reinforcement architectures and synergistic electronic/ionic conductivity of the LiB/Li3BN2 dual-lithiophilic-phases. This work provides a new methodology for thin Li strip processing and reinforced-architecture design, with implications beyond battery applications.
ABSTRACT
LiB alloy is promising lithium (Li) metal anode material because the continuous internal LiB fiber skeleton can effectively suppress Li dendrites and structural pulverization. However, the unvalued surface states limit the practical application of LiB alloy anodes. Herein, the study examined the influence of the different exposure manners of the internal LiB fiber skeleton owing to the various surface states of the LiB alloy anode on electrochemical performance and targetedly proposed a scalable friction coating strategy to construct a lithiated fumed silica (LFS) functional layer with abundant electrochemically active sites on the surface of the LiB alloy anode. The LFS significantly suppresses the inhomogeneous interfacial electrochemical behavior of the LiB alloy anode and enables the exposure of the internal LiB fiber skeleton in a homogeneously planar manner (LFS-LiB). Thus, a 0.5 Ah LFS-LiB||LiCoO2 (LCO) pouch cell exhibits a discharge capacity retention rate of 80% after 388 cycles. Moreover, a 6.15 Ah LFS-LiB||S pouch cell with 409.3 Wh kg-1 exhibits a discharge capacity retention rate of 80% after 30 cycles. In conclusion, the study findings provide a new research perspective for Li alloy anodes.
ABSTRACT
Extracellular polymeric substances (EPS), which were an important fraction of natural organic matter (NOM), played an important role in various environmental processes. However, the heterogeneity, complexity, and dynamics of EPS make their interactions with antibiotics elusive. Using advanced multispectral technology, this study examined how EPS interacts with different concentrations of tetracycline (TC) in the soil system. Our results demonstrated that protein-like (C1), fulvic-like (C2), and humic-like (C3) fractions were identified from EPS. Two-dimensional synchronous correlation spectroscopy (2D-SF-COS) indicated that the protein-like fraction gave faster responses than the fulvic-like fraction during the TC binding process. The sequence of structural changes in EPS due to TC binding was revealed by two-dimensional Fourier Transformation Infrared correlation spectroscopy (2D-FTIR-COS) as follows: 1550 > 1660 > 1395 > 1240 > 1087 cm-1. It is noteworthy that the sensitivity of the amide group to TC has been preserved, with its intensity gradually increasing to become the primary binding site for TC. The integration of hetero-2DCOS maps with moving window 2D correlation spectroscopy (MW2DCOS) provided a unique insight into understanding the correlation between EPS fractions and functional groups during the TC binding process. Moreover, molecular docking (MD) discovered that the extracellular proteins would provide plenty of binding sites with TC through salt bridges, hydrogen bonds, and π-π base-stacking forces. With these results, systematic investigations of the dynamic changes in EPS components under different concentrations of antibiotic exposure demonstrated the advanced capabilities of multispectral technology in examining intricate interactions with EPS in the soil environment.
Subject(s)
Escherichia coli , Extracellular Polymeric Substance Matrix , Molecular Docking Simulation , Tetracycline , Tetracycline/chemistry , Tetracycline/metabolism , Escherichia coli/metabolism , Escherichia coli/drug effects , Extracellular Polymeric Substance Matrix/metabolism , Extracellular Polymeric Substance Matrix/chemistry , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/metabolism , Binding Sites , Spectroscopy, Fourier Transform InfraredABSTRACT
Transition metal chalcogenides (TMCs) are widely used in photocatalytic fields such as hydrogen evolution, nitrogen fixation, and pollutant degradation due to their suitable bandgaps, tunable electronic and optical properties, and strong reducing ability. The unique 2D malleability structure provides a pre-designed platform for customizable structures. The introduction of vacancy engineering makes up for the shortcomings of photocorrosion and limited light response and provides the greatest support for TMCs in terms of kinetics and thermodynamics in photocatalysis. This work reviews the effect of vacancy engineering on photocatalytic performance based on 2D semiconductor TMCs. The characteristics of vacancy introduction strategies are summarized, and the development of photocatalysis of vacancy engineering TMCs materials in energy conversion, degradation, and biological applications is reviewed. The contribution of vacancies in the optical range and charge transfer kinetics is also discussed from the perspective of structure manipulation. Vacancy engineering not only controls and optimizes the structure of the TMCs, but also improves the optical properties, charge transfer, and surface properties. The synergies between TMCs vacancy engineering and atomic doping, other vacancies, and heterojunction composite techniques are discussed in detail, followed by a summary of current trends and potential for expansion.
ABSTRACT
Due to the broad interest in using biochar from biomass pyrolysis for the adsorption of heavy metals (HMs) in wastewater, machine learning (ML) has recently been adopted by many researchers to predict the adsorption capacity (η) of HMs on biochar. However, previous studies focused mainly on developing different ML algorithms to increase predictive performance, and no study shed light on engineering features to enhance predictive performance and improve model interpretability and generalizability. Here, based on a dataset widely used in previous ML studies, features of biochar were engineered-elemental compositions of biochar were calculated on mole basis-to improve predictive performance, achieving test R2 of 0.997 for the gradient boosting regression (GBR) model. The elemental ratio feature (H-O-2N)/C, representing the H site links to C (non-active site to HMs), was proposed for the first time to help interpret the GBR model. The (H-O-2N)/C and pH of biochar played essential roles in replacing cation exchange capacity (CEC) for predicting η. Moreover, expanding the coverages of variables by adding cases from references improved the generalizability of the model, and further validation using cases without CEC and specific surface area (R2 0.78) and adsorption experimental results (R2 0.72) proved the ML model desirable. Future studies in this area may take into account algorithm innovation, better description of variables, and higher coverage of variables to further increase the model's generalizability.
Subject(s)
Metals, Heavy , Adsorption , Metals, Heavy/chemistry , Charcoal/chemistry , Machine LearningABSTRACT
Wadsley-Roth niobium oxide phases have attracted extensive research interest recently as promising battery anodes. We have synthesized the niobium-molybdenum oxide shear phase (Nb, Mo)13 O33 with superior electrochemical Li-ion storage performance, including an ultralong cycling lifespan of at least 15000â cycles. During electrochemical cycling, a reversible single-phase solid-solution reaction with lithiated intermediate solid solutions is demonstrated using in situ X-ray diffraction, with the valence and short-range structural changes of the electrode probed by in situ Nb and Mo K-edge X-ray absorption spectroscopy. This work reveals that the superior stability of niobium molybdenum oxides is underpinned by changes in octahedral distortion during electrochemical reactions, and we report an in-depth understanding of how this stabilizes the oxide structure during cycling with implications for future long-life battery material design.
ABSTRACT
Ubiquitination is a fascinating post-translational modification that has received continuous attention since its discovery. In this review, we first provide a concise overview of the E3 ubiquitin ligases, delving into classification, characteristics and mechanisms of ubiquitination. We then specifically examine the ubiquitination pathways mediated by the N/C-degrons, discussing their unique features and substrate recognition mechanisms. Finally, we offer insights into the current state of development pertaining to inhibitors that target the N/C-degron pathways, as well as the promising advances in the field of PROTAC (PROteolysis TArgeting Chimeras). Overall, this review offers a comprehensive understanding of the rapidly-evolving field of ubiquitin biology.
Subject(s)
Degrons , Ubiquitin-Protein Ligases , Proteolysis , Ubiquitin-Protein Ligases/genetics , Ubiquitination , Ubiquitin/metabolismABSTRACT
Adult hippocampal neurogenesis generates functional neurons from neural progenitor cells in the hippocampal dentate gyrus (DG) to complement and repair neurons and neural circuits, thus benefiting the treatment of depression. Increasing evidence has shown that aberrant microglial activity can disrupt the appropriate formation and development of functional properties of neurogenesis, which will play a crucial role in the occurrence and development of depression. However, the mechanisms of the crosstalk between microglia and adult hippocampal neurogenesis in depression are not yet fully understood. Therefore, in this review, we first introduce recent discoveries regarding the roles of microglia and adult hippocampal neurogenesis in the etiology of depression. Then, we systematically discuss the possible mechanisms of how microglia regulate adult hippocampal neurogenesis in depression according to recent studies, which involve toll-like receptors, microglial polarization, fractalkine-C-X3-C motif chemokine receptor 1, hypothalamic-pituitary-adrenal axis, cytokines, brain-derived neurotrophic factor, and the microbiota-gut-brain axis, etc. In addition, we summarize the promising drugs that could improve the adult hippocampal neurogenesis by regulating the microglia. These findings will help us understand the complicated pathological mechanisms of depression and shed light on the development of new treatment strategies for this disease.
Subject(s)
Depression , Microglia , Depression/drug therapy , Microglia/pathology , Hypothalamo-Hypophyseal System , Pituitary-Adrenal System , Hippocampus/physiology , Neurogenesis/physiologyABSTRACT
The practical application of Li metal anodes (LMAs) is limited by uncontrolled dendrite growth and side reactions. Herein, we propose a new friction-induced strategy to produce high-performance thin Li anode (Li@CFO). By virtue of the in situ friction reaction between fluoropolymer grease and Li strips during rolling, a robust organic/inorganic hybrid interlayer (lithiophilic LiF/LiC6 framework hybridized -CF2-O-CF2- chains) was formed atop Li metal. The derived interface contributes to reversible Li plating/stripping behaviors by mitigating side reactions and decreasing the solvation degree at the interface. The Li@CFO||Li@CFO symmetrical cell exhibits a remarkable lifespan for 5,600 h (1.0 mA cm-2 and 1.0 mAh cm-2) and 1,350 cycles even at a harsh condition (18.0 mA cm-2 and 3.0 mAh cm-2). When paired with high-loading LiFePO4 cathodes, the full cell lasts over 450 cycles at 1C with a high-capacity retention of 99.9%. This work provides a new friction-induced strategy for producing high-performance thin LMAs.
ABSTRACT
Recently, bismuth (Bi)-based photocatalysts have been a well-deserved hotspot in the field of photocatalysis owning to their photoelectrochemical properties driven by the distortion of the Bi 6 s orbital, while their narrow band gap and poor quantum efficiency still restrict their application. With the development of ultrasonic technology, it is expected to become a broom to clear the application obstacles of Bi-based photocatalysts. The special forces and environmental conditions brought by ultrasonic irradiation play beneficial roles in the preparation, modification and performance releasement of Bi-based photocatalysts. In this review, the role and influencing factors of ultrasound in the preparation and modification of Bi-based photocatalysts were introduced. Crucially, the mechanism of the improving the performance for various types of Bi-based photocatalysts by ultrasound in the whole process of photocatalysis was deeply analyzed. Then, the application of ultrasonic synergistic Bi-based photocatalysts in contaminants treatment and energy conversion was briefly introduced. Finally, based on an unambiguous understanding of ultrasonic technology in assisting Bi-based photocatalysts, the future directions and possibilities for ultrasonic synergistic Bi-based photocatalysts are explored.
ABSTRACT
A practical high-specific-energy Li metal battery requires thin (≤20 µm) and free-standing Li metal anodes, but the low melting point and strong diffusion creep of lithium metal impede their scalable processing towards thin-thickness and free-standing architecture. In this paper, thin (5 to 50 µm) and free-standing lithium strips were achieved by mechanical rolling, which is determined by the in situ tribochemical reaction between lithium and zinc dialkyldithiophosphate (ZDDP). A friction-induced organic/inorganic hybrid interface (~450 nm) was formed on Li with an ultra-high hardness (0.84 GPa) and Young's modulus (25.90 GPa), which not only enables the scalable process mechanics of thin lithium strips but also facilitates dendrite-free lithium metal anodes by inhibiting dendrite growth. The rolled lithium anode exhibits a prolonged cycle lifespan and high-rate cycle stability (in excess of more than 1700 cycles even at 18.0 mA cm-2 and 1.5 mA cm-2 at 25 °C). Meanwhile, the LiFePO4 (with single-sided load 10 mg/cm2) ||Li@ZDDP full cell can last over 350 cycles with a high-capacity retention of 82% after the formation cycles at 5 C (1 C = 170 mA/g) and 25 °C. This work provides a scalable approach concerning tribology design for producing practical thin free-standing lithium metal anodes.
ABSTRACT
We developed an approach of magnetic dispersive solid-phase extraction (MSPE) based on magnetic graphene nanocomposite rGO/Fe3O4 for the determination of trace Sb(III) and Sb(V) using inductively coupled plasma mass spectrometry (ICP-MS). Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR) were used to characterize the sorbent. The adsorption behavior of Sb(III) and Sb(V) on rGO/Fe3O4 was investigated. The results showed that the adsorption capacity of Sb(V) was nearly zero at pH = 9, while Sb(III) could be well adsorbed on rGO/Fe3O4. The magnetic SPE parameters including pH, adsorbent dosage, eluent type, and volume were optimized. The detection limit of Sb(III) under ideal conditions was 6 ng L-1, and the relative standard deviation was 7.6% (c = 1 g L-1, n = 7). The technique was used to identify Sb(III) at trace levels in environmental water samples, and its validity was examined by recovery experiments and the examination of an approved reference material.
ABSTRACT
Emerging photoelectrocatalytic (PEC) systems integrate the advantages of photocatalysis and electrocatalysis and are considered as a promising technology for solving the global organic pollution problem in water environments. Among the photoelectrocatalytic materials applied for organic pollutant degradation, graphitic carbon nitride (CN) has the combined advantages of environmental compatibility, stability, low cost, and visible light response. However, pristine CN has disadvantages such as low specific surface area, low electrical conductivity, and high charge complexation rate, and how to improve the degradation efficiency of PEC reaction and the mineralization rate of organic matter is the main problem faced in this field. Therefore, this paper reviews the progress of various functionalized CN used for PEC reaction in recent years, and the degradation efficiency of these CN-based materials is critically evaluated. First, the basic principles of PEC degradation of organic pollutants are outlined. Then, engineering strategies to enhance the PEC activity of CN (including morphology control, elemental doping, and heterojunction construction) are focused on, and the structure-activity relationships between these engineering strategies and PEC activity are discussed. In addition, the important role of influencing factors on the PEC system is summarized in terms of mechanism, to provide guidance for the subsequent research. Finally, suggestions and perspectives are provided for the preparation of efficient and stable CN-based photoelectrocatalysts for practical wastewater treatment applications.
Subject(s)
Environmental Pollutants , WaterABSTRACT
OBJECTIVE: We used our established database to investigate predialysis blood pressure (BP) measurements at different time points. METHODS: Our study period spanned from 1 January 2019 to 31 December 2019. The different time points included: the long interdialytic interval versus the short interdialytic interval; different hemodialysis shifts. Multiple linear regression was used to explore the association between BP measurements and different time points. RESULTS: A total of 37â 081 cases of hemodialysis therapies were included. After a long interdialytic interval, predialysis SBP and DBP were significantly elevated. Predialysis BP was 147.72/86.73â mmHg on Monday and 148.26/86.52â mmHg on Tuesday, respectively. Both predialysis SBP and DBP were higher in the a.m. shift. The mean BP in the a.m. and p.m. shifts were 147.56/87â mmHg and 144.83/84.64â mmHg, respectively. In both diabetic nephropathy and non-diabetic nephropathy patients, higher SBP measurements after a long interdialytic interval were observed; however, in diabetic nephropathy patients, we did not find significant differences in DBP among different dates. In diabetic nephropathy and non-diabetic nephropathy patients, we observed that the effect of different shifts on BP was similar. In Monday, Wednesday and Friday subgroups, the long interdialytic interval was also associated with BP; however, in Tuesday, Thursday and Saturday subgroups, different shifts but not the long interdialytic interval was associated with BP. CONCLUSION: The long interdialytic interval and different hemodialysis shifts have a significant effect on predialysis BP in patients with hemodialysis. When interpreting BP in patients with hemodialysis, different time points is a confounder.
Subject(s)
Kidney Failure, Chronic , Renal Dialysis , Humans , Blood Pressure/physiology , Arterial Pressure , Blood Pressure Determination , Blood Pressure Monitoring, Ambulatory , Kidney Failure, Chronic/complicationsABSTRACT
BACKGROUND The association of laminar opening extent (LOE) with sagittal canal diameter (SCD) and the cross-sectional area (CSA) in unilateral door cervical laminoplasty (UDCL) was previously analyzed. However, the lamina abrasion has been neglected, which could lead to unreliable results. The present study aims to develop the concept of effective laminar opening extent (ELOE) with consideration of the lamina abrasion and to analyze the relationships between ELOE and SCD as well as the CSA of the spinal canal. MATERIAL AND METHODS A total of 138 patients treated by UDCL were included. Pre- and postoperative SCDs and CSAs and cervical Japanese Orthopaedic Association (JOA) scores were compared to verify the effectiveness of the surgery. Linear and curvilinear regression models were used to assess the association between postoperative SCD/CSA increases and ELOE. RESULTS All surgeries were successfully performed. A total of 602 mini-plates were used, and 12-mm mini-plates was the most often used (n=402, 66.78%), while 16-mm were used the least (n=25, 4.15%). The SCDs, CSAs, and JOA scores were increased significantly after surgery (P0.939, P0.938, P.
Subject(s)
Laminoplasty , Orthopedics , Soft Tissue Injuries , Humans , Laminoplasty/adverse effects , Neck , Postoperative PeriodABSTRACT
BACKGROUND: LY01005 (Goserelin acetate sustained-release microsphere injection) is a modified gonadotropin-releasing hormone (GnRH) agonist injected monthly. This phase III trial study aimed to evaluated the efficacy and safety of LY01005 in Chinese patients with prostate cancer. METHODS: We conducted a randomized controlled, open-label, non-inferiority trial across 49 sites in China. This study included 290 patients with prostate cancer who received either LY01005 or goserelin implants every 28 days for three injections. The primary efficacy endpoints were the percentage of patients with testosterone suppression ≤50 ng/dL at day 29 and the cumulative probability of testosterone ≤50 ng/dL from day 29 to 85. Non-inferiority was prespecified at a margin of -10%. Secondary endpoints included significant castration (≤20 ng/dL), testosterone surge within 72 h following repeated dosing, and changes in luteinizing hormone, follicle-stimulating hormone, and prostate specific antigen levels. RESULTS: On day 29, in the LY01005 and goserelin implant groups, testosterone concentrations fell below medical-castration levels in 99.3% (142/143) and 100% (140/140) of patients, respectively, with a difference of -0.7% (95% confidence interval [CI], -3.9% to 2.0%) between the two groups. The cumulative probabilities of maintaining castration from days 29 to 85 were 99.3% and 97.8%, respectively, with a between-group difference of 1.5% (95% CI, -1.3% to 4.4%). Both results met the criterion for non-inferiority. Secondary endpoints were similar between groups. Both treatments were well-tolerated. LY01005 was associated with fewer injection-site reactions than the goserelin implant (0% vs . 1.4% [2/145]). CONCLUSION: LY01005 is as effective as goserelin implants in reducing testosterone to castration levels, with a similar safety profile. TRIAL REGISTRATION: ClinicalTrials.gov, NCT04563936.
Subject(s)
Goserelin , Prostatic Neoplasms , Humans , Male , Antineoplastic Agents, Hormonal/therapeutic use , East Asian People , Gonadotropin-Releasing Hormone/agonists , Goserelin/therapeutic use , Prostate-Specific Antigen , Prostatic Neoplasms/drug therapy , TestosteroneABSTRACT
Probiotics are an alternative strategy for antibiotics, but most probiotics are Gram-positive bacteria suitable for terrestrial animals. Therefore, it is imperative to develop dedicated probiotics for the common carp industry to be ecologically efficient and environmentally friendly. A novel Enterobacter asburiae named E7 was isolated from the intestine of healthy common carp and displayed an extensive antibacterial spectrum against Aeromonas hydrophila, A. veronii, A. caviae, A. media, A. jandaei, A. enteropelogenes, A. schubertii, A. salmonicida, Pseudomonas aeruginosa, Ps. putida, Plesiomonas shigelloides, and Shewanella. E7 was nonpathogenic to the host and susceptible to the majority of antibiotics used in human clinical practice. E7 could grow between 10 and 45°C and between pH 4 and 7 and was extremely resistant to 4% (wt/vol) bile salts. Diets were supplemented with 1 × 107 CFU/g E. asburiae E7 for 28 days. No significant difference in the growth of fish was observed. Expression of immune-related genes IL-10, IL-8, and lysozyme in common carp kidney was significantly upregulated at weeks 1, 2, and 4 (P < 0.01). A significant upregulation of IL-1ß, IFN, and TNF-α expression was observed after week 4 (P < 0.01). There was a significant increase in mRNA expression of TGF-ß at week 3 (P < 0.01). Following challenge by Aeromonas veronii, the survival rate (91.05%) was significantly higher than observed in the controls (54%; P < 0.01). Collectively, E. asburiae E7 is a promising new Gram-negative probiotic that can enhance health and bacterial resistance of aquatic animals and could thus be developed as an exclusive aquatic probiotic. IMPORTANCE In the present study, we evaluated for the first time the efficiency of Enterobacter asburiae as a prospective probiotic for aquaculture applications. The E7 strain showed extensive resistance to Aeromonas, no pathogenicity to the host, and stronger environmental tolerance. We observed that the resistance of common carp to A. veronii was enhanced by feeding a diet containing 1 × 107 CFU/g E. asburiae E7 for 28 days, but growth was not improved. Strain E7 can act as an immunostimulant to induce the upregulation of some innate cellular and humoral immune responses, resulting in enhanced resistance to A. veronii. Hence, the continuous activation of immune cells can be maintained by adding suitable fresh probiotics to the diet. E7 has the potential to act as a probiotic agent for green, sustainable aquaculture and aquatic product safety.
ABSTRACT
Numerous studies have revealed the spread mechanism of antibiotic resistance genes (ARGs) in single antibiotic-contaminated soils. However, the comprehensive impacts of heavy metals and antibiotics on ARGs and the underlying mechanisms are still unknown. Here, high-throughput quantitative PCR and high-throughput sequencing were used to investigate changes in ARGs and bacterial communities under various sulfamethoxazole (SMX) regimes (0, 1, 10, 50 mg kg-1) in arsenic (As) contaminated soils. The study found that the abundances of ARGs, mobile genetic elements (MGEs), and heavy metal resistance genes (HMRGs) significantly increased in the soil fortified at 10 and 50 mg kg-1 SMX concentrations. The ARGs abundance increased with the increase in the MGEs abundance. Many significant positive correlations between various ARGs subtypes and HMRGs subtypes were found. These results indicate that the HMRGs and MGEs positively contributed to the enrichment of ARGs in As-contaminated soils under SMX stress. Meanwhile, the abundance of copiotrophic (Actinobacteriota) reduced and oligotrophic (Gemmatimonadota) increased, indicating that the life history strategy of the community changed. In addition, Gemmatimonadota was positively correlated to ARGs, HMRGs, and MGEs, suggesting that Gemmatimonadota, which can cope with As and SMX stress, was the host for resistance genes in the soil. Finally, the study found that MGEs play a determinant role in ARGs proliferation due to the direct utilization of HGT, and the indirect effect for ARGs spread under a co-selection mechanism of ARGs and HMRGs, while the bacterial community showed indirect influences by altering environmental factors to act on MGEs. Collectively, this study revealed new insights into the mechanisms of resistance gene transmission under combined SMX and As contamination in soil ecosystems.
Subject(s)
Arsenic , Metals, Heavy , Anti-Bacterial Agents/pharmacology , Sulfamethoxazole/toxicity , Arsenic/toxicity , Genes, Bacterial , Ecosystem , Drug Resistance, Microbial/genetics , Bacteria/genetics , Soil , Soil MicrobiologyABSTRACT
MAIN CONCLUSION: This review proposed that phytoremediation could be applied for the decontamination of MPs/NPs. Micro- and nano-plastics (MPs < 5 mm; NPs < 100 nm) are emerging contaminants. Much of the recent concerns have focused on the investigation of their pollution and their potential eco-toxicity. Yet little review was available on the decontamination of MPs/NPs. Recently, the uptake of MPs/NPs by plants has been confirmed. Here, in view of the current knowledge, this review introduces MPs/NPs pollution and highlights the updated information about the interaction between MPs/NPs and plants. This review proposed that phytoremediation could be a potential possible way for the in situ remediation of MPs/NPs-contaminated environment. The possible mechanisms, influencing factors, and existing problems are summarized, and further research needs are proposed. This review herein provides new insights into the development of plant-based process for emerging pollutants decontamination, as well as the alleviation of MPs/NPs-induced toxicity to the ecosystem.