ABSTRACT
Bimetallic nanostructured catalysts have shown great promise in the areas of energy, environment and magnetics. Tunable composition and electronic configurations due to lattice strain at bimetal interfaces have motivated researchers worldwide to explore them industrial applications. However, to date, the fundamentals of the synthesis of lattice-mismatched bimetallic nanocrystals are still largely uninvestigated for most supported catalyst materials. Therefore, in this work, we have conducted a detailed review of the synthesis and structural characterization of bimetallic nanocatalysts, particularly for renewable energies. In particular, the synthesis of Pt, Au and Pd bimetallic particles in a liquid phase has been critically discussed. The outcome of this review is to provide industrial insights of the rational design of cost-effective nanocatalysts for sustainable conversion technologies.
ABSTRACT
PURPOSE: This study aimed to develop and validate a new model that focused on the risk of imminent vertebral fractures in women with osteoporosis. METHODS: Data from 2,048 patients were extracted from three hospitals, of which 1,720 patients passed the inclusion and exclusion screen. The patients from Nanfang Hospital (NFH) were randomized at a 2:1 ratio to create a training cohort (n = 709) and an internal validation cohort (n = 355), with the patients from the other two hospitals (n = 656) used for external validation. The risk factors included in the imminent osteoporotic vertebral compression fractures (OVCFs) prediction model (labelled TVF) were sorted by the least absolute shrinkage and selection operator and constructed by logistic regression. The area under the receiver operating characteristic curve (AUC), the decision curve, and the clinical impact curves of the optimal model were analyzed to verify the model. RESULTS: There were 138 and 161 fresh fractures in NFH and the other two hospitals, respectively. The lowest BMD T value and the history of vertebral fracture were integrated into the TVF model. The prediction power of TVF was demonstrated by the AUCs of 0.788 (95% confidence interval [CI], 0.728-0.849) in the training cohort and 0.774 (95% CI, 0.705-0.842) in the internal validation cohort, and 0.790 (95% CI, 0.742-0.839) and 0.741 (95% CI, 0.668-0.813) in the external validation cohorts. CONCLUSION: The TVF model demonstrated good discrimination to stratify the imminent risk of OVCFs. We therefore consider the model as a pertinent commencement in the search for more accurate imminent OVCFs prediction.
ABSTRACT
Acephate is commonly used as a seed treatment (ST) in precision agriculture, but its impact on pollinators, earthworms, and soil microorganisms remains unclear. This study aimed to compare the fate of acephate seed dressing (SD) and seed coating (SC) treatments and assess potential risks to bees, earthworms, and soil microorganisms. Additionally, a follow-up study on maize seeds treated with acephate in a greenhouse was conducted to evaluate the maize growth process and the dissipation dynamics of the insecticide. The results indicated that acephate SC led to greater uptake and translocation in maize plants, resulting in lower residue levels in the soil. However, high concentrations of acephate metabolites in the soil had a negative impact on the body weight of earthworms, whereas acephate itself did not. The potential risk to bees from exposure to acephate ST was determined to be low, but dose-dependent effects were observed. Furthermore, acephate ST had no significant effect on soil bacterial community diversity and abundance compared to a control. This study provides valuable insights into the uptake and translocation of acephate SD and SC, and indicates that SC is safer than SD in terms of adverse effects on bees and nontarget soil organisms.
Subject(s)
Agriculture , Insecticides , Oligochaeta , Phosphoramides , Seeds , Soil Microbiology , Zea mays , Animals , Bees/physiology , Agriculture/methods , Insecticides/toxicity , Soil Pollutants/toxicity , Organothiophosphorus Compounds/toxicity , Soil/chemistryABSTRACT
STATEMENT OF PROBLEM: High-level evidence regarding the accuracy and adaptation of 1-piece endodontic crowns fabricated by using 3-dimensional (3D) printing technology is lacking. PURPOSE: The purpose of this in vitro study was to compare the accuracy and adaptation of 1-piece endodontic crowns produced through 3D printing and computer-numerical-control milling technology and to explore the influence of trueness on 1-piece endodontic crown adaptation. MATERIAL AND METHODS: One-piece endodontic crowns were prepared for a typodont right mandibular first molar, scanned with a 3Shape E3 scanner, and designed with a computer-aided design software program. Two types of 1-piece endodontic crowns were fabricated: 3D printed by using resin and zirconia slurry and milled from Grandio and zirconia blocks. A reverse engineering software program was used to superimpose 4 groups of crowns with the reference crowns used for accuracy analysis. Microcomputed tomography was used to measure 1-piece endodontic crown adaptation. The correlation between trueness and adaptation was evaluated through the Spearman correlation test (α=.05). RESULTS: Milled resin-based 1-piece endodontic crowns demonstrated better trueness on marginal and occlusal surfaces compared with 3D printed ones (P<.001). However, no significant difference was observed in the trueness of intaglio surfaces between the 2 groups (P>.05). The milled group exhibited better adaptations than the printed one (P<.05). For zirconia 1-piece endodontic crowns, no significant differences were found in trueness or adaptation between the milled and printed groups (P>.05). Notably, the trueness of the axial wall had the greatest impact on overall crown adaptation, with its adaptation closely linked to the trueness of each area, particularly the axial wall. CONCLUSIONS: Milled resin-based 1-piece endodontic crowns exhibited higher levels of trueness and adaptation compared with 3D printed ones, while 3D printed zirconia 1-piece endodontic crowns were comparable with milled ones.
Subject(s)
Computer-Aided Design , Crowns , Dental Prosthesis Design , Printing, Three-Dimensional , Humans , Dental Prosthesis Design/methods , Zirconium , Dental Marginal Adaptation , X-Ray Microtomography , In Vitro TechniquesABSTRACT
Providencia genus is known to harbor certain opportunistic pathogens capable of causing human infections. Here, we report two strains of multidrug-resistant bacteria initially identified as Providencia rettgeri by mass spectrometry, but genome analysis revealed their ANI (79.84-84.20%) and dDDH (21.1-25.6%) values to fall below the accepted species threshold for known Providencia species. We therefore propose that these isolates be recognized as a novel species, Providencia xianensis sp. nov. Alarmingly, both strains, isolated from locations far apart, exhibited resistance to last-resort antibiotics, indicating their possible wide distribution, underscoring the urgency for immediate attention and enhanced surveillance for this emerging multidrug-resistant pathogen.
Subject(s)
Anti-Bacterial Agents , Drug Resistance, Multiple, Bacterial , Enterobacteriaceae Infections , Providencia , Providencia/drug effects , Providencia/genetics , Providencia/isolation & purification , Providencia/classification , Humans , Enterobacteriaceae Infections/microbiology , Anti-Bacterial Agents/pharmacology , Phylogeny , Male , Genome, Bacterial/genetics , Microbial Sensitivity Tests , RNA, Ribosomal, 16S/genetics , Female , Middle AgedABSTRACT
Purpose: Since the introduction of ceftazidime-avibactam (CZA) in the Chinese market, accumulating clinical evidence has substantiated its efficacy in the treatment of infections caused by carbapenem-resistant gram-negative bacteria (CR-GNB). Nevertheless, an ongoing debate persists concerning the choice between monotherapy and combination therapy when devising clinical anti-infection protocols. Patients and Methods: This retrospective, single-center observational study enrolled patients with CR-GNB infections who received CZA treatment between December 2019 and August 2023. The primary outcome assessed was 30-day mortality, and the secondary outcome measured was 14-day bacterial clearance. A multivariate Cox regression model was used to identify variables that were independently associated with 30-day mortality rate. Results: Eighty-three patients were enrolled in the study; of which, 45 received CZA monotherapy, whereas 38 received combination therapy. The overall 30-day mortality rate was 31.3%, and no significant difference was observed in the 30-day mortality rates between the CZA combination therapy and monotherapy groups (31.6% vs 31.1%, p=0.963). After adjustment by propensity score matching, the 30-day mortality rate was not significantly different between the two groups (28.6% vs 31.4%, p=0.794). Multivariate COX analysis revealed that age and SOFA score were independent predictors of 30-day mortality. Conclusion: Combination therapy with CZA and other antimicrobials was not found to have an advantage over monotherapy in reducing the 30-day mortality rate.
ABSTRACT
Extracellular matrix (ECM) remodeling is accompanied by the continuous synthesis and degradation of the ECM components. This dynamic process plays an important role in guiding cell adhesion, migration, proliferation, and differentiation, as well as in tissue development, body repair, and maintenance of homeostasis. Nanomaterials, due to their photoelectric and catalytic properties and special structure, have garnered much attention in biomedical fields for use in processes such as tissue engineering and disease treatment. Nanomaterials can reshape the cell microenvironment by changing the synthesis and degradation of ECM-related proteins, thereby indirectly changing the behavior of the surrounding cells. This review focuses on the regulatory role of nanomaterials in the process of cell synthesis of different ECM-related proteins and extracellular protease. We discuss influencing factors and possible related mechanisms of nanomaterials in ECM remodeling, which may provide different insights into the design and development of nanomaterials for the treatment of ECM disorder-related diseases.
Subject(s)
Extracellular Matrix , Nanostructures , Extracellular Matrix/metabolism , Extracellular Matrix Proteins/analysis , Extracellular Matrix Proteins/chemistry , Extracellular Matrix Proteins/metabolism , Tissue Engineering , Cell AdhesionABSTRACT
Enhancing the performance of traditional pesticide formulations by improving their leaf surface wetting capabilities is a crucial approach for maximizing the pesticide efficiency. This study develops an emulsifiable concentrate (EC) of 4.5% ß-cypermethrin containing Brucea javanica oil (BJO). The incorporation of BJO aims to improve the leaf-wetting properties of the EC formulation and enhance its insecticidal effectiveness. The droplet size and emulsion characteristics of ß-CYP EC emulsion with varying concentrations of the emulsifier were evaluated, and changes after incorporating BJO were assessed to develop the optimal formulation. A comprehensive comparison was conducted among commercial 4.5% ß-cypermethrin EC (ß-CYP EC-1), 4.5% ß-cypermethrin EC with BJO (ß-CYP EC-2), and 4.5% ß-cypermethrin EC without BJO (ß-CYP EC-3). This comparison encompassed various factors including storage stability, insecticidal activity, cytotoxicity, and wetting performance on cabbage leaves. The results indicated that the ideal emulsifier concentration was 15% emulsifier 0201B. ß-CYP EC-2 demonstrated superior wetting properties on cabbage leaves (the wetting performance of ß-CYP EC-2 emulsion on cabbage leaves is 2.60 times that of the ß-CYP EC-1 emulsion), heightened insecticidal activity against the third larvae of Plutella xylostella [diamondback moth (DBM)] [the insecticidal activity of the ß-CYP EC-2 emulsion against the third larvae of DBM is 1.93 times that of the ß-CYP EC-1 emulsion (12 h)], and more obvious inhibitory effects on the proliferation of DBM embryo cells than the other tested formulations. These findings have significant implications for advancing pest control strategies and promoting sustainable and effective agricultural practices.
Subject(s)
Brucea , Insecticides , Pyrethrins , Brucea javanica , Plant Oils/pharmacology , Emulsions , Insecticides/toxicityABSTRACT
@#Digital intraoral scanning is a hot topic in the field of oral digital technology. In recent years, digital intraoral scanning has gradually become the mainstream technology in orthodontics, prosthodontics, and implant dentistry. The precision of digital intraoral scanning and the accuracy and stitching of data collection are the keys to the success of the impression. However, the operators are less familiar with the intraoral scanning characteristics, imaging processing, operator scanning method, oral tissue specificity of the scanned object, and restoration design. Thus far, no unified standard and consensus on digital intraoral scanning technology has been achieved at home or abroad. To deal with the problems encountered in oral scanning and improve the quality of digital scanning, we collected common expert opinions and sought to expound the causes of scanning errors and countermeasures by summarizing the existing evidence. We also describe the scanning strategies under different oral impression requirements. The expert consensus is that due to various factors affecting the accuracy of digital intraoral scanning and the reproducibility of scanned images, adopting the correct scanning trajectory can shorten clinical operation time and improve scanning accuracy. The scanning trajectories mainly include the E-shaped, segmented, and S-shaped methods. When performing fixed denture restoration, it is recommended to first scan the abutment and adjacent teeth. When performing fixed denture restoration, it is recommended to scan the abutment and adjacent teeth first. Then the cavity in the abutment area is excavated. Lastly, the cavity gap was scanned after completing the abutment preparation. This method not only meets clinical needs but also achieves the most reliable accuracy. When performing full denture restoration in edentulous jaws, setting markers on the mucosal tissue at the bottom of the alveolar ridge, simultaneously capturing images of the vestibular area, using different types of scanning paths such as Z-shaped, S-shaped, buccal-palatal and palatal-buccal pathways, segmented scanning of dental arches, and other strategies can reduce scanning errors and improve image stitching and overlap. For implant restoration, when a single crown restoration is supported by implants and a small span upper structure restoration, it is recommended to first pre-scan the required dental arch. Then the cavity in the abutment area is excavated. Lastly, scanning the cavity gap after installing the implant scanning rod. When repairing a bone level implant crown, an improved indirect scanning method can be used. The scanning process includes three steps: First, the temporary restoration, adjacent teeth, and gingival tissue in the mouth are scanned; second, the entire dental arch is scanned after installing a standard scanning rod on the implant; and third, the temporary restoration outside the mouth is scanned to obtain the three-dimensional shape of the gingival contour of the implant neck, thereby increasing the stability of soft tissue scanning around the implant and improving scanning restoration. For dental implant fixed bridge repair with missing teeth, the mobility of the mucosa increases the difficulty of scanning, making it difficult for scanners to distinguish scanning rods of the same shape and size, which can easily cause image stacking errors. Higher accuracy of digital implant impressions can be achieved by changing the geometric shape of the scanning rods to change the optical curvature radius. The consensus confirms that as the range of scanned dental arches and the number of data concatenations increases, the scanning accuracy decreases accordingly, especially when performing full mouth implant restoration impressions. The difficulty of image stitching processing can easily be increased by the presence of unstable and uneven mucosal morphology inside the mouth and the lack of relatively obvious and fixed reference objects, which results in insufficient accuracy. When designing restorations of this type, it is advisable to carefully choose digital intraoral scanning methods to obtain model data. It is not recommended to use digital impressions when there are more than five missing teeth.
ABSTRACT
OBJECTIVES: To observe the effects of acupoint application with turmeric blistering moxibustion plaster on pain, shoulder range of motion (ROM) and upper limb motor function in the patients with post-stroke hemiplegic shoulder pain (PSHSP). METHODS: Eighty-two patients with PSHSP were randomly divided into an observation group (41 cases, 1 case was eliminated, 4 cases dropped out) and a control group (41 cases, 2 cases were eliminated and 2 cases dropped out). The routine treatment, nursing care and rehabilitation training were performed in the control group. On the basis of the intervention as the control group, in the observation group, the turmeric blistering moxibustion plaster was applied to bilateral ashi points, Jianyu (LI 15), Jianliao (TE 14), Binao (LI 14), Shousanli (LI 10) and Hegu (LI 4), once a day, remained for 6 hours each time. This moxibustion therapy was operated 5 times weekly, one course of treatment consisted of 2 weeks and 2 courses were required. Separately, before treatment and after 2 and 4 weeks of treatment, the score of visual analogue scale (VAS), shoulder ROM and the score of upper limbs in Fugl-Meyer assessment (U-FMA) were observed in the two groups. RESULTS: VAS scores were lower (P<0.05), ROM in shoulder flexion, abduction, internal rotation and external rotation was larger (P<0.05), and U-FMA scores were higher (P<0.05) after 2 and 4 weeks of treatment when compared with those before treatment in the two groups. After 4 weeks of treatment, VAS score decreased (P<0.05), and ROM in shoulder flexion, abduction, internal rotation, external rotation and U-FMA score increased (P<0.05) in comparison with those after 2 weeks of treatment in either group. In the observation group, VAS scores were dropped (P<0.05) after 2 and 4 weeks of treatment respectively, and ROM of shoulder flexion and abduction enlarged after 2 weeks of treatment (P<0.05) when compared with those in the control group. After 4 weeks of treatment, ROM in shoulder flexion, abduction, internal rotation and external rotation in the observation group was larger (P<0.05) and U-FMA score was higher (P<0.05) than those in the control group. CONCLUSIONS: Acupoint application with turmeric blistering moxibustion plaster may effectively reduce the degree of shoulder pain and improve the shoulder range of motion and the upper limb motor function in the patients with post-stroke hemiplegic shoulder pain.
Subject(s)
Moxibustion , Shoulder , Humans , Shoulder Pain/etiology , Shoulder Pain/therapy , Acupuncture Points , Curcuma , Hemiplegia/etiology , Hemiplegia/therapy , Treatment OutcomeABSTRACT
Purpose: To analyze the risk factors and clinical outcomes of patients isolated with polymyxin B-resistant (PR) Enterobacterales from various clinical specimens to prevent and control the spread of these strains. Methods: This retrospective case-control study included 72 PR Enterobacterales-positive cases and 144 polymyxin B-susceptible (PS) Enterobacterales controls from 2018 to 2022. Patients with PR Enterobacterales isolated in various clinical cultures were defined as cases. Patients with PS Enterobacterales cultures at similar anatomic sites during the same period were randomly selected as controls. Data were collected from clinical and laboratory test records. Bivariable logistic regression and Pearson's chi-square tests were used to assess risk factors. Results: PR strains were predominantly Klebsiella pneumoniae (72.2%) and Salmonella enteritidis (8.3%). Of the patients, 66.04% were admitted to an intensive care unit (ICU). Risk factors for isolation with PR strains included chronic heart disease (P = 0.012; odds ratio [OR] 1.15; 95% confidence interval [CI] 1.03-1.28), immunosuppressant use (P = 0.016; OR 1.04 [1.0-1.07), drainage tube [head] (P = 0.006; OR 1.1 [1.0-1.1]), and polymyxin B exposure (P = 0.007; OR 1.03 [1.0-1.06]. With respect to outcomes, admission to an ICU (P = 0.003; OR 7.1 [1.9-25.4]), hypertension (P = 0.035; OR 1.4 [1.02-1.83]), and drainage tube [head] (P = 0.044; OR 1.1 [1.0-1.15]) were associated with treatment failure. Additionally, treatment failure was more frequent in patients (45.83%) than in controls (14.58%). Conclusion: The major risk factors for isolation with PR strains were chronic heart disease, exposure to immunosuppressants, use of drainage tubes, and polymyxin B exposure. The isolation of PR strains in patients was a predictor of unfavorable outcomes. These findings provide a basis for monitoring the spread of PR Enterobacterales.
ABSTRACT
Chlorfenapyr (CHL) is a pyrrole insecticide with a novel structure that is used to control resistant pests. However, its weak systemic activity limits its application to crop roots. Herein, a novel CHL formulation with improved effective utilization rates and suitability for root application is developed to avoid or reduce contamination caused by pesticide spraying. Accordingly, we prepared CHL@CS/CMCS nanoparticle (NP) suspensions with a particle size of approximately 100 nm using chitosan (CS) and carboxymethyl chitosan (CMCS). These suspensions exhibited better thermal stability, adhesion, permeability and systemic activity than a CHL suspension concentrate (CHL-SC). The nanoformulation deposition rate on maize leaves after spraying was 12.28 mg/kg, significantly higher than that of CHL-SC. The nanosuspension was effectively absorbed and transported by roots after irrigation and was suitable for root application. The efficacy was 89.46-92.36 % against Spodoptera frugiperda at 7 d, 7.5-17.5 times higher than that of CHL-SC. Furthermore, the CHL@CS/CMCS nanosuspension was safer for earthworms. These results suggest that chitosan-based nanoformulations improve the efficacy, utilization efficiency and active period of CHL control, providing a new approach for CHL application, reducing pollutant dispersal and the environmental impacts of pesticide application and facilitating sustainable agricultural production.
Subject(s)
Chitosan , Insecticides , Chitosan/pharmacology , Chitosan/chemistry , Zea mays , Insecticides/pharmacology , Environmental PollutionABSTRACT
BACKGROUND: Re-epithelialization is important in the process of wound healing. Various methods have been identified to expedite the process, but their clinical application remains limited. While parathyroid hormone (PTH) has shown promising results in wound healing due to its role in promoting collagen deposition and cell migration, application is limited by its potentially inhibitive effects when being continuously and locally administrated. Herein, we developed a novel PTH analog, Human parathyroid hormone (hPTH) (3-34/29-34) (henceforth MY-1), by partially replacing and repeating the amino acid sequences of hPTH (1-34), and evaluated its effect on skin wound re-epithelialization. METHODS: CCK-8, colony formation unit assay, and Ki67 immunofluorescent staining were performed to evaluate the effect of MY-1 on HaCaT cell proliferation. Then, wound scratch assay, Transwell assay and lamellipodia staining were carried out to evaluate the effect of MY-1 on cell migration. Moreover, the epithelial-mesenchymal transition (EMT) markers were measured using qPCR and western blot analysis. For in-vivo drug delivery, gelatin methacryloyl (GelMA) hydrogel was employed to load the MY-1, with the physicochemical characteristics evaluated prior to its application in wound models. Then, MY-1's role in wound healing was determined via acute skin wound models. Finally, the mechanism that MY-1 activated was also detected on HaCaT cells and in-vivo wound models. RESULTS: In-vitro, MY-1 accelerated the migration and EMT of HaCaT cells, while having little effect on cell proliferation. GelMA and MY-1-incorporated GelMA hydrogels showed similar physicochemical characteristics and were used in the in-vivo studies, where the results revealed that MY-1 led to a stronger re-epithelialization by inducing basal keratinocyte migration and EMT. Further studies on in-vivo wound models and in-vitro HaCaT cells revealed that MY-1 regulated cell migration and EMT through activating PI3K/AKT signaling. The parathyroid hormone type 1 receptor (PTHR1), the main receptor of PTH, was found to be the upstream of PI3K/AKT signaling, through interfering PTHR1 expression with a small interference RNA following detection of the PI3K/AKT activation. CONCLUSION: Collectively, our study demonstrated that MY-1 accelerates skin wound re-epithelialization by inducing keratinocyte migration and EMT via PTHR1-PI3K/AKT axis activation. Video Abstract.
Subject(s)
Phosphatidylinositol 3-Kinases , Re-Epithelialization , Humans , Proto-Oncogene Proteins c-akt , Epithelial-Mesenchymal Transition , Cell Movement , HaCaT CellsABSTRACT
BACKGROUND: Monolepta hieroglyphica (Motschulsky) is an important agricultural pest that causes significant economic losses in terms of crop production. Conventional pesticide spraying treatments can result in pesticide drift, endanger nontarget organisms and cause pests to fly away, resulting in unsatisfactory prevention and control effects. To study the effect of thiamethoxam on the control of maize M. hieroglyphica, a field experiment was conducted to determine the optimal thiamethoxam application dose, its spatial and temporal distribution dynamics, and its dietary risk based on its control effect when applied by spray and drip irrigation. RESULTS: The results of the field trials showed that compared with spray irrigation, drip irrigation resulted in greater control starting from Day 5. This result was a consequence of the hysteresis effect of thiamethoxam being first absorbed by the roots and then continuously transferred upward, where it accumulates. After 30 days of drip irrigation with 75 and 150 g a.i. ha-1 thiamethoxam, the control effect on M. hieroglyphica was 32.41-49.44% and 69.77-80.57%, respectively. The results of the dietary risk assessment showed that the risk of thiamethoxam ingestion through maize kernels was acceptable regarding its effect on human health. CONCLUSIONS: Drip irrigation with thiamethoxam can improve the effective utilization rate of pesticides, achieve precise control of maize M. hieroglyphica, and provide a new method for sustainable agricultural production. © 2023 Society of Chemical Industry.
Subject(s)
Coleoptera , Pesticides , Animals , Humans , Thiamethoxam , Zea mays , Agriculture , Plant Roots , Agricultural Irrigation/methodsABSTRACT
Each step in angiogenesis is regulated by the extracellular matrix (ECM). Accumulating evidence indicates that ageing-related changes in the ECM driven by cellular senescence lead to a reduction in neovascularisation, reduced microvascular density, and an increased risk of tissue ischaemic injury. These changes can lead to health events that have major negative impacts on quality of life and place a significant financial burden on the healthcare system. Elucidating interactions between the ECM and cells during angiogenesis in the context of ageing is neceary to clarify the mechanisms underlying reduced angiogenesis in older adults. In this review, we summarize ageing-related changes in the composition, structure, and function of the ECM and their relevance for angiogenesis. Then, we explore in detail the mechanisms of interaction between the aged ECM and cells during impaired angiogenesis in the older population for the first time, discussing diseases caused by restricted angiogenesis. We also outline several novel pro-angiogenic therapeutic strategies targeting the ECM that can provide new insights into the choice of appropriate treatments for a variety of age-related diseases. Based on the knowledge gathered from recent reports and journal articles, we provide a better understanding of the mechanisms underlying impaired angiogenesis with age and contribute to the development of effective treatments that will enhance quality of life.
Subject(s)
Cellular Senescence , Quality of Life , Extracellular Matrix , KnowledgeABSTRACT
Purpose: To study the etiological characteristics and risk factors affecting the prognosis of patients with polymicrobial bloodstream infections. Patients and Methods: Overall, 141 patients with polymicrobial bloodstream infections in Henan Provincial People's Hospital during 2021 were included. Laboratory test indexes, department of admission, sex, age, intensive care unit (ICU) admission, surgical history, and central venous catheter placement were collected. Patients were divided into surviving and deceased groups based on outcomes at discharge. Mortality risk factors were identified by univariate and multivariable analyses. Results: Seventy-two of 141 patients survived. Patients were mainly from the ICU and the Departments of Hepatobiliary Surgery and Hematology. Overall, 312 microbial strains were detected: 119 gram-positive, 152 gram-negative, and 13 anaerobic bacteria and 28 fungi. Among the gram-positive bacteria, coagulase-negative staphylococci were most frequent (44/119, 37%), followed by enterococci (35/119, 29.4%). Among coagulase-negative staphylococci, methicillin-resistant coagulase-negative staphylococci incidence was 75% (33/44). Among gram-negative bacteria, Klebsiella pneumoniae was most common (45/152, 29.6%), followed by Escherichia coli (25/152, 16.4%) and Pseudomonas aeruginosa (13/152, 8.6%). Among K. pneumoniae, the incidence of carbapenem-resistant (CR) K. pneumoniae was 45.7% (21/45). On univariate analysis, mortality risk factors included increased white blood cells and C-reactive protein, decreased total protein and albumin, CR strains, ICU admission, central venous catheter, multiple organ failure, sepsis, shock, pulmonary diseases, respiratory failure, central nervous system diseases, cardiovascular diseases, hypoproteinemia, and electrolyte disturbances (P < 0.05). Multivariable analysis showed that ICU admission, shock, electrolyte disorders, and central nervous system diseases were independent mortality risk factors. The survival curve shows that the survival rate of patients with polymicrobial CR bloodstream infections was lower than that of patients with polymicrobial non-CR bloodstream infections (P=0.029). Conclusion: Patients with polymicrobial bloodstream infections are typically critically ill and harbor multidrug-resistant bacteria. Thus, to minimize mortality rate in critically ill patients, changes in infectious flora should be monitored, antibiotics selected reasonably, and invasive procedures reduced.
ABSTRACT
Purpose: To evaluate the performance of five widespread commercial products for colistin and polymyxin B susceptibility testing in China for mcr-positive and -negative Escherichia coli and Klebsiella pneumoniae. Methods: A total of 132 E. coli and 83 K. pneumoniae strains (including 68 mcr-1-positive E. coli and 28 mcr-8-positive K. pneumoniae) were collected. We analysed the performance of colistin susceptibility (with Vitek 2 and Phoenix M50) and the performance of polymyxin B susceptibility (with DL-96II, MA120, and a Polymyxin B Susceptibility Test strip; POL E-strip). Broth microdilution was used as the gold standard. Categorical agreement (CA), essential agreement (EA), major error (ME), and very major error (VME) were calculated for comparisons. Results: For E. coli, the total CA, EA, ME, and VME to colistin were as follows: Vitek 2, 98.5%/98.5%/0%/2.9%; and Phoenix M50, 98.5%/97.7%/0%/2.9%. The total CA, EA, ME, and VME to polymyxin B were as follows: POL E-strip, 99.2%/63.6%/1.6%/0%; MA120, 70.0%/-/0%/58.8%; and DL-96II, 80.2%/-/1.6%/36.8%. Only Vitek 2 and Phoenix M50 presented satisfactory performances for mcr-1-positive E. coli. For K. pneumoniae, the total CA, EA, ME, and VME to colistin were as follows: Vitek 2, 73.2%/72.0%/0%/61.6%; and Phoenix M50, 74.7%/74.7%/0%/58.3%. The total CA, EA, ME, and VME to polymyxin B were as follows: POL E-strip, 91.6%/74.7%/2.1%/16.7%; MA120, 92.8%/-/2.1%/13.9%; and DL-96II, 92.2%/-/2.1%/8.3%. All systems were unsatisfactory for mcr-8-positive K. pneumoniae. When the susceptibility of mcr-negative strains was tested, all systems presented excellent performance. Conclusion: Vitek 2 and Phoenix M50 with colistin for E. coli showed acceptable performance regardless of mcr-1 expression, while DL-96II, MA120, and the POL E-strip performed worse for mcr-1-positive strains. Furthermore, mcr-8 greatly affected the performance of all systems with both colistin and polymyxin B for K. pneumoniae isolates.
ABSTRACT
Introduction: In China, the long-term immunogenicity and adverse effects of inactivated vaccines produced by different or the same manufacturer remain unclear. Therefore, the objective of this study was to evaluate the cellular immune responses and neutralizing antibody kinetics of homologous and heterologous administrations of an inactivated coronavirus disease 2019 (COVID-19) vaccine 240 days after the second vaccination. Methods: This prospective, multicenter, observational, longitudinal study involved 595 participants with a negative SARS-CoV-2 polymerase chain reaction result who were serologically tested and followed for 8 months after vaccination. Neutralizing antibodies, interferon-gamma (IFN-γ), interleukin (IL)-6, CD4+ T-lymphocyte, and B-lymphocyte counts were evaluated in serum samples after stimulation with 2 µg/mL SARS-CoV-2 spike protein for 16 h at follow-up intervals of 2 months. Results: Most participants [582/595; 146 male participants, 449 female participants; mean age 35 (26-50 years)] rapidly developed neutralizing antibodies after two doses of the vaccine administered 3-weeks apart. The positive rate of neutralizing antibodies peaked at 97.7% at 60-90 days, decreased, and stabilized at 82.9% at 181-240 days post-vaccination. Lower antibody concentrations were correlated with older age, longer duration after vaccination, non-health care workers, mixed-manufacturer vaccinations, and intervals of less than 40 days between two doses of vaccination, whereas lower IFN-γ levels and B-lymphocyte counts were associated with older age, blood type A, and non-health care workers. A higher IL-6 level was associated with older age, mixed-manufacturer vaccinations, intervals of less than 40 days between two doses of vaccination, and medical staff. Adverse reactions were mild or moderate and self-limited, with no serious events reported. Discussion: Two doses of the Chinese inactivated vaccine induced robust and rapid antibody expression and cellular immune responses. Boosting vaccination is considered important, as antibodies and cellular immune responses were reduced in susceptible populations.
Subject(s)
COVID-19 Vaccines , COVID-19 , Adult , Female , Humans , Male , Antibodies, Neutralizing , China , COVID-19/prevention & control , COVID-19 Vaccines/immunology , Longitudinal Studies , Prospective Studies , SARS-CoV-2 , Immunity, Humoral , Immunity, Cellular , Middle AgedABSTRACT
BACKGROUND: No reliable model can currently be used for predicting coronary artery disease (CAD) occurrence in patients with diabetes. We developed and validated a model predicting the occurrence of CAD in these patients. METHODS: We retrospectively enrolled patients with diabetes at Henan Provincial People's Hospital between 1 January 2020 and 10 June 2020, and collected data including demographics, physical examination results, laboratory test results, and diagnostic information from their medical records. The training set included patients ( n â=â1152) enrolled before 15 May 2020, and the validation set included the remaining patients ( n â=â238). Univariate and multivariate logistic regression analyses were performed in the training set to develop a predictive model, which were visualized using a nomogram. The model's performance was assessed by area under the receiver-operating characteristic curve (AUC) and Brier scores for both data sets. RESULTS: Sex, diabetes duration, low-density lipoprotein, creatinine, high-density lipoprotein, hypertension, and heart rate were CAD predictors in diabetes patients. The model's AUC and Brier score were 0.753 [95% confidence interval (CI) 0.727-0.778] and 0.152, respectively, and 0.738 (95% CI 0.678-0.793) and 0.172, respectively, in the training and validation sets, respectively. CONCLUSIONS: Our model demonstrated favourable performance; thus, it can effectively predict CAD occurrence in diabetes patients.