Air disinfection performance of upper-room ultraviolet germicidal irradiation (UR-UVGI) system in a multi-compartment dental clinic.

Multi-compartment dental clinics present significant airborne cross-infection risks. Upper-room ultraviolet germicidal irradiation (UR-UVGI) system have shown promise in preventing airborne pathogens, but its available application data are insufficient in multi-compartment dental clinics. Therefore, the UR-UVGI system's performance in a multi-compartment dental clinic was comprehensively evaluated in this study. The accuracy of the turbulence and drift flux models was verified by experimental data from ultrasonic scaling. The effects of the ventilation rate, irradiation zone volume, and irradiation flux on UR-UVGI performance were analyzed using computational fluid dynamics coupled with a UV inactivation model. Different patient numbers were considered. The results showed that UR-UVGI significantly reduced virus concentrations and outperformed increased ventilation rates alone. At a ventilation rate of six air changes per hour (ACH), UR-UVGI with an irradiation zone volume of 20% and irradiation flux of 5 µW/cm2 achieved a 70.44% average virus reduction in the whole room (WR), outperforming the impact of doubling the ventilation rate from 6 to 12 ACH without UR-UVGI. The highest disinfection efficiency of UR-UVGI decreased for WRs with more patients. The compartment treating patients exhibited significantly lower disinfection efficiency than others. Moreover, optimal UR-UVGI performance occurs at lower ventilation rates, achieving over 80% virus disinfection in WR. Additionally, exceeding an irradiation zone volume of 20% or an irradiation flux of 5 µW/cm2 notably reduces the improvement rates of UR-UVGI performance. These findings provide a scientific reference for strategically applying UR-UVGI in multi-compartment dental clinics.

Susceptibility and exposure risk to airborne aerosols in intra-urban microclimate: Evidence from subway system of mega-cities.

The health of intra-urban population in modern megacities relies largely on the biosafety within the microclimate of subway system, which can be vulnerable to epidemical challenges brought by virus-laden bioaerosols under varying factors. The literature has yet to address the association between the exposure risks to infectious pathogens and the dynamic changes of boundary conditions in this densely populated microclimate. This study aims at characterizing the bioaerosol dispersion, evaluating the exposure risks under various train arrival scenarios and hazard releasing positions in a real-world double-decker subway station. The results provide the evidence for the dominating airflow pattern, bioaerosols dispersion behaviors, exposure risk, and evacuation guidance in a representative microclimate of mega-cities. The tunnel effects of nearby pedestrian passageways are found to be dominating the airflow pattern, leading to the discharging of airborne bioaerosols. At least 60 % increasing of discharging rate of bioaerosol is attributed to the arrival of one or two trains at the subway platform compared with the scenario with no train arriving. Results from risk assessment with improved Wells-Riley model estimate 57.62 % of maximum infectivity probability with no train arriving. Large areas near the source at the platform floor still cannot be considered safe within 20 min. For the other two scenarios where trains arrive at the platform, the maximum probability of infection is below 5 %. Moreover, the majority of train carriages can be regarded as safe zones, as the ventilation across the screen door are mostly directed towards the platform. Additionally, releasing the bioaerosols at the platform floor poses the most severe threats to human health, and the corresponding evacuation strategies are suggested. These findings offer practical guidance for the design of the intra-urban microclimate, reinforcing the need for exposure reduction device or contingency plans, and providing potential evacuation strategy towards improved health outcomes.

Estimating the restraint of SARS-CoV-2 spread using a conventional medical air-cleaning device: Based on an experiment in a typical dental clinical setting.

OBJECTIVES: Droplets or aerosols loaded with SARS-CoV-2 can be released during breathing, coughing, or sneezing from COVID-19-infected persons. To investigate whether the most commonly applied air-cleaning device in dental clinics, the oral spray suction machine (OSSM), can provide protection to healthcare providers working in clinics against exposure to bioaerosols during dental treatment. METHOD: In this study, we measured and characterized the temporal and spatial variations in bioaerosol concentration and deposition with and without the use of the OSSM using an experimental design in a dental clinic setting. Serratia marcescens (a bacterium) and ΦX174 phage (a virus) were used as tracers. The air sampling points were sampled using an Anderson six-stage sampler, and the surface-deposition sampling points were sampled using the natural sedimentation method. The Computational Fluid Dynamics method was adopted to simulate and visualize the effect of the OSSM on the concentration spatial distribution. RESULTS: During dental treatment, the peak exposure concentration increased by up to 2-3 orders of magnitude (PFU/m3) for healthcare workers. Meanwhile, OSSM could lower the mean bioaerosol exposure concentration from 58.84 PFU/m3 to 4.10 PFU/m3 for a healthcare worker, thereby inhibiting droplet and airborne transmission. In terms of deposition, OSSM significantly reduced the bioaerosol surface concentration from 28.1 PFU/m3 to 2.5 PFU/m3 for a surface, effectively preventing fomite transmission. CONCLUSION: The use of OSSM showed the potential to restraint the spread of bioaerosols in clinical settings. Our study demonstrates that OSSM use in dental clinics can reduce the exposure concentrations of bioaerosols for healthcare workers during dental treatment and is beneficial for minimizing the risk of infectious diseases such as COVID-19.

Transmission characteristics of infectious pathogen-laden aerosols in a negative-pressure operating room.

The infectious pathogen-laden aerosols generated by infected patients have a significant impact on the safety of surgical staff in highly clean negative-pressure operating rooms. Understanding the transmission characteristics of infectious pathogen-laden aerosols is therefore essential. Therefore, in this study, we conducted experiments in a full-size negative-pressure operating room, and the Phi-X174 phage was used as a bioaerosol release source to investigate the migration and deposition of bioaerosols. The high-concentration spatial regions and high-concentration deposition surfaces of the bioaerosols in the operating room were determined. The results showed that there was a high concentration of bioaerosols in the vortex region below the medical lamp for extended periods of time. Three surgical staff members close to the patient's surgical site had high bioaerosol concentrations at their facial sampling points, with the highest concentration reaching 16,553 PFU/m³ . At the end of bioaerosol generation, 99.9% of the bioaerosols were discharged within 10 mins. The bioaerosol deposition rates per unit area were high at 1.48%/m2, 0.46%/m2 and 1.79%/m2 for the central control panel, storage cabinet, and door surface, respectively. This research can be used as a scientific reference for controlling bioaerosols and determining key disinfection parts in a negative-pressure operating room.

Bioaerosol distribution characteristics and potential SARS-CoV-2 infection risk in a multi-compartment dental clinic.

Dental clinics have a potential risk of infection, particularly during the COVID-19 pandemic. Multi-compartment dental clinics are widely used in general hospitals and independent clinics. This study utilised computational fluid dynamics to investigate the bioaerosol distribution characteristics in a multi-compartment dental clinic through spatiotemporal distribution, working area time-varying concentrations, and key surface deposition. The infection probability of SARS-CoV-2 for the dental staff and patients was calculated using the Wells-Riley model. In addition, the accuracy of the numerical model was verified by field measurements of aerosol concentrations performed during a clinical ultrasonic scaling procedure. The results showed that bioaerosols were mainly distributed in the compartments where the patients were treated. The average infection probability was 3.8% for dental staff. The average deposition number per unit area of the treatment chair and table are 28729 pcs/m2 and 7945 pcs/m2, respectively, which creates a possible contact transmission risk. Moreover, there was a certain cross-infection risk in adjacent compartments, and the average infection probability for patients was 0.84%. The bioaerosol concentrations of the working area in each compartment 30 min post-treatment were reduced to 0.07% of those during treatment, and the infection probability was <0.05%. The results will contribute to an in-depth understanding of the infection risk in multi-compartment dental clinics, forming feasible suggestions for management to efficiently support epidemic prevention and control in dental clinics.