ABSTRACT
For highly active electron transfer and ion diffusion, controlling the surface wettability of electrically and thermally conductive 3D graphene foams (3D GFs) is required. Here, we present ultrasimple and rapid superwettability switching of 3D GFs in a reversible and reproducible manner, mediated by solvent-exclusive microwave arcs. As the 3D GFs are prepared with vapors of nonpolar acetone or polar water exclusively, short microwave radiation (≤10 s) leads to plasma hotspot-mediated production of methyl and hydroxyl radicals, respectively. Upon immediate radical chemisorption, the 3D surfaces become either superhydrophobic (water contact angle = â¼170°) or superhydrophilic (â¼0°), and interestingly, the wettability transition can be repeated many times due to the facile exchange between previously chemisorbed and newly introduced radicals via the formation of methanol-like intermediates. When 3D GFs of different surficial polarities are incorporated into electric double-layer capacitors with nonpolar ionic liquids or polar aqueous electrolytes, the polarity matching between graphene surfaces and electrolytes results in ≥548.0 times higher capacitance compared to its mismatching at ≥0.5 A g-1, demonstrating the significance of wettability-controlled 3D GFs.
ABSTRACT
Monodisperse nanoparticles of biodegradable polyhydroxyalkanoates (PHAs) polymers, copolymers of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB), are synthesized using a membrane-assisted emulsion encapsulation and evaporation process for biomedical resorbable adhesives. The precise control over the diameter of these PHA particles, ranging from 100 nm to 8 µm, is achieved by adjusting the diameter of emulsion or the PHA concentration. Mechanical properties of the particles can be tailored based on the 3HB to 4HB ratio and molecular weight, primarily influenced by the level of crystallinity. These monodisperse PHA particles in solution serve as adhesives for hydrogel systems, specifically those based on poly(N, N-dimethylacrylamide) (PDMA). Semi-crystalline PHA nanoparticles exhibit stronger adhesion energy than their amorphous counterparts. Due to their self-adhesiveness, adhesion energy increases even when those PHA nanoparticles form multilayers between hydrogels. Furthermore, as they degrade and are resorbed into the body, the PHA nanoparticles demonstrate efficacy in in vivo wound closure, underscoring their considerable impact on biomedical applications.
Subject(s)
Nanoparticles , Particle Size , Polyhydroxyalkanoates , Tissue Adhesives , Polyhydroxyalkanoates/chemistry , Nanoparticles/chemistry , Tissue Adhesives/chemistry , Animals , Hydrogels/chemistry , Biocompatible Materials/chemistry , Surface PropertiesABSTRACT
In this study, we investigated the optical properties of a transition metal dichalcogenide (TMD) substrate via Mie-scattering-induced surface analysis (MISA). Employing near-field optical microscopy and finite-difference time-domain (FDTD) simulations, we systemically prove and directly visualize the Mie scattering of superspherical gold nanoparticles (s-AuNPs) at the nanoscale. Molybdenum disulfide substrates exhibited optical isotropy, while rhenium disulfide (ReS2) substrates showed anisotropic behavior attributed to the interaction with incident light's electric field. Our study revealed substantial anisotropic trends in Mie scattering, particularly in the near-infrared energy range, with ReS2 exhibiting more pronounced spectral and angular responses in satellite peaks. Our results emphasize the application of Mie scattering, exploring the optical properties of substrates and contributing to a deeper understanding of nanoscale light-matter interactions.
ABSTRACT
Drug delivery through complex skin is currently being studied using various innovative structural and material strategies due to the low delivery efficiency of the multilayered stratum corneum as a barrier function. Existing microneedle-based or electrical stimulation methods have made considerable advances, but they still have technical limitations to reduce skin discomfort and increase user convenience. This work introduces the design, operation mechanism, and performance of noninvasive transdermal patch with dual-layered suction chamber cluster (d-SCC) mimicking octopus-limb capable of wet adhesion with enhanced adhesion hysteresis and physical stimulation. The d-SCC facilitates cupping-driven drug delivery through the skin with only finger pressure. Our device enables nanoscale deformation control of stratum corneum of the engaged skin, allowing for efficient transport of diverse drugs through the stratum corneum without causing skin discomfort. Compared without the cupping effect of d-SCC, applying negative pressure to the porcine, human cadaver, and artificial skin for 30 min significantly improved the penetration depth of liquid-formulated subnanoscale medicines up to 44, 56, and 139%. After removing the cups, an additional acceleration in delivery to the skin was observed. The feasibility of d-SCC was demonstrated in an atopic dermatitis-induced model with thickened stratum corneum, contributing to the normalization of immune response.
ABSTRACT
The scalable synthetic route to colloidal atoms has significantly advanced over the past two decades. Recently, colloidal clusters with DNA-coated cores called "patchy colloidal clusters" have been developed, providing a directional bonding with specific angle of rotation due to the shape complementarity between colloidal clusters. Through a DNA-mediated interlocking process, they are directly assembled into low-coordination colloidal structures, such as cubic diamond lattices. Herein, the significant progress in recent years in the synthesis of patchy colloidal clusters and their assembly in experiments and simulations is reviewed. Furthermore, an outlook is given on the emerging approaches to the patchy colloidal clusters and their potential applications in photonic crystals, metamaterials, topological photonic insulators, and separation membranes.
ABSTRACT
Nanophotonics relies on precise control of refractive index (RI) which can be designed with metamaterials. Plasmonic superstructures of nanoparticles (NPs) can suggest a versatile way of tuning RI. However, the plasmonic effects in the superstructures demand 1 nm-level exquisite control over the interparticle gap, which is challenging in a sub-wavelength NPs. Thus far, a large-area demonstration has been mostly discouraged. Here, heteroligand AuNPs are prepared, which are stable in oil but become Janus particles at the oil-water interface, called "adaptive Janus particles." NPs are bound at the interface and assembled into 2D arrays over square centimeters as toluene evaporates, which distinctively exhibits the RI tunability. In visible and NIR light, the 2D superstructures exhibit the highest-ever RI (≈7.8) with varying the size and interparticle gap of NPs, which is successfully explained by a plasmonic percolation model. Furthermore, fully solution-processable 2D plasmonic superstructures are proved to be advantageous in flexible photonic devices such as distributed Bragg reflectors.
ABSTRACT
Several studies have examined the effects of micro- and nanoplastics on microbes, cells, and the environment. However, only a few studies have examined their effects-especially, those of their reduced cohesiveness-on cell viability and physiology. We synthesized surfactant-free amine-functionalized polystyrene (PS) nanoparticles (NPs) and PS-NPs with decreased crosslinking density (DPS-NPs) without changing other factors, such as size, shape, and zeta potential and examined their effects on cell viability and physiology. PS- and DPS-NPs exhibited reactive oxygen species (ROS) scavenging activity by upregulating GPX3 expression and downregulating HSP70 (ROS-related gene) and XBP1 (endoplasmic reticulum stress-related gene) expression in human bone marrow-derived mesenchymal stem cells (hBM-MSCs). Additionally, they led to upregulation of MFN2 (mitochondrial fusion related gene) expression and downregulation of FIS1 (mitochondrial fission related gene) expression, indicating enhanced mitochondrial fusion in hBM-MSCs. Cell-cycle analysis revealed that PS- and DPS-NPs increased the proportion of cells in the S phase, indicating that they promoted cell proliferation and, specifically, the adipogenic differentiation of hBM-MSCs. However, the cytotoxicity of DPS-NPs against hBM-MSCs was higher than that of PS-NPs after long-term treatment under adipogenic conditions.
Subject(s)
Nanoparticles , Polystyrenes , Cell Differentiation , Humans , Microplastics/toxicity , Nanoparticles/toxicity , Polystyrenes/toxicity , Stem CellsABSTRACT
Colloidal clusters are prepared by assembling positively charged cross-linked polystyrene (PS) particles onto negatively charged liquid cores of swollen polymer particles. PS particles at the interface of the liquid core are closely packed around the core due to interfacial wetting. Then, by evaporating solvent in the liquid cores, polymers in the cores are solidified and the clusters are cemented. As the swelling ratio of PS cores increases, cores at the center of colloidal clusters are exposed, forming patchy colloidal clusters. Finally, by density gradient centrifugation, high-purity symmetric colloidal clusters are obtained. When silica-PS core-shell particles are swollen and serve as the liquid cores, hybrid colloidal clusters are obtained in which each silica nanoparticle is relocated to the liquid core interface during the swelling-deswelling process breaking symmetry in colloidal clusters as the silica nanoparticle in the core is comparable in size with the PS particle in the shell. The configuration of colloidal clusters is determined once the number of particles around the liquid core is given, which depends on the size ratio of the liquid core and shell particle. Since hybrid clusters are heavier than PS particles, they can be purified using centrifugation.
ABSTRACT
We describe a general procedure for the large-scale fabrication of bowl-shaped colloidal particles using an emulsion templating technique. Following this method, single polymeric seed particles become located on individual oil droplet surfaces. The polymer phase is subsequently plasticized using an appropriate solvent. In this critical step, the compliant seed is deformed by surface tension, with the droplet serving as a templating surface. Solvent evaporation freezes the desired particle shape and the oil is subsequently removed by alcohol dissolution. The resulting uniformly-shaped colloidal particles were studied using scanning electron and optical microscopy. By adjusting the droplet size and the seed particle diameter, we demonstrate that the final particle shape can be controlled precisely, from shallow lenses to deep bowls. We also show that the colloid's uniformity and abundant quantity allowed the depletion-mediated assembly of flexible colloidal chains and clusters.
ABSTRACT
Gold nanoparticles (AuNPs) have been widely used as nanocarriers in drug delivery to improve the efficiency of chemotherapy treatment and enhance early disease detection. The advantages of AuNPs include their excellent biocompatibility, easy modification and functionalization, facile synthesis, low toxicity, and controllable particle size. This study aimed to synthesize a conjugated citraconic anhydride link between morphologically homogeneous AuNPs and doxorubicin (DOX) (DOX-AuNP). The carrier was radiolabeled for tumor diagnosis using positron emission tomography (PET). The systemically designed DOX-AuNP was cleaved at the citraconic anhydride linker site under the mild acidic conditions of a cancer cell, thereby releasing DOX. Subsequently, the AuNPs aggregated via electrostatic attraction. HeLa cancer cells exhibited a high uptake of the radiolabeled DOX-AuNP. Moreover, PET tumor images were obtained using radiolabeled DOX-AuNP in cancer xenograft mouse models. Therefore, DOX-AuNP is expected to provide a valuable insight into the use of radioligands to detect tumors using PET.
Subject(s)
Gold/chemistry , Hydrogen-Ion Concentration , Metal Nanoparticles/chemistry , Uterine Cervical Neoplasms/diagnostic imaging , Animals , Antibiotics, Antineoplastic/chemistry , Antibiotics, Antineoplastic/metabolism , Antibiotics, Antineoplastic/therapeutic use , Doxorubicin/chemistry , Doxorubicin/metabolism , Doxorubicin/therapeutic use , Female , Gold/metabolism , HeLa Cells , Humans , Mice , Positron-Emission Tomography , Radioligand Assay , Uterine Cervical Neoplasms/drug therapy , Uterine Cervical Neoplasms/metabolism , Xenograft Model Antitumor AssaysABSTRACT
The molecular weights and chain rigidities of block copolymers can strongly influence their self-assembly behavior, particularly when the block copolymers are under confinement. We investigate the self-assembly of bottlebrush block copolymers (BBCPs) confined in evaporative emulsions with varying molecular weights. A series of symmetric BBCPs, where polystyrene (PS) and polylactide (PLA) side-chains are grafted onto a polynorbornene (PNB) backbone, are synthesized with varying degrees of polymerization of the PNB (NPNB) ranging from 100 to 300. Morphological transitions from onion-like concentric particles to striped ellipsoids occur as the NPNB of the BBCP increases above 200, which is also predicted from coarse-grained simulations of BBCP-containing droplets by an implicit solvent model. This transition is understood by the combined effects of (i) an elevated entropic penalty associated with bending lamella domains of large molecular weight BBCP particles and (ii) the favorable parallel alignment of the backbone chains at the free surface. Furthermore, the morphological evolutions of onion-like and ellipsoidal particles are compared. Unlike the onion-like BBCP particles, ellipsoidal BBCP particles are formed by the axial development of ring-like lamella domains on the particle surface, followed by the radial propagation into the particle center. Finally, the shape anisotropies of the ellipsoidal BBCP particles are analyzed as a function of particle size. These BBCP particles demonstrate promising potential for various applications that require tunable rheological, optical, and responsive properties.
ABSTRACT
Coating colloidal particles with DNA provides one of the most versatile and powerful methods for controlling colloidal self-assembly. Previous studies have shown how combining DNA coatings with DNA strand displacement allows one to design phase transitions between different three-dimensional crystal structures. Here we show that by using DNA coatings with bifunctional colloidal Janus particles, we can realize reconfigurable thermally reversible transitions between one- and two-dimensional self-assembled colloidal structures. We introduce a colloidal system in which DNA-coated asymmetric Janus particles can reversibly switch their Janus balance in response to temperature, resulting in the reconfiguration of assembling structures between colloidal chains and bilayers. Each face of the Janus particles is coated with different self-complementary DNA strands. Toehold strand displacement is employed to selectively activate or deactivate the sticky ends on the smaller face, which enables Janus particles to selectively assemble through either the smaller or larger face. This strategy could be useful for constructing complex systems that could be reconfigured to assemble into different structures in different environments.
Subject(s)
Colloids , DNA , TemperatureABSTRACT
Self-assembling colloidal particles in the cubic diamond crystal structure could potentially be used to make materials with a photonic bandgap1-3. Such materials are beneficial because they suppress spontaneous emission of light1 and are valued for their applications as optical waveguides, filters and laser resonators4, for improving light-harvesting technologies5-7 and for other applications4,8. Cubic diamond is preferred for these applications over more easily self-assembled structures, such as face-centred-cubic structures9,10, because diamond has a much wider bandgap and is less sensitive to imperfections11,12. In addition, the bandgap in diamond crystals appears at a refractive index contrast of about 2, which means that a photonic bandgap could be achieved using known materials at optical frequencies; this does not seem to be possible for face-centred-cubic crystals3,13. However, self-assembly of colloidal diamond is challenging. Because particles in a diamond lattice are tetrahedrally coordinated, one approach has been to self-assemble spherical particles with tetrahedral sticky patches14-16. But this approach lacks a mechanism to ensure that the patchy spheres select the staggered orientation of tetrahedral bonds on nearest-neighbour particles, which is required for cubic diamond15,17. Here we show that by using partially compressed tetrahedral clusters with retracted sticky patches, colloidal cubic diamond can be self-assembled using patch-patch adhesion in combination with a steric interlock mechanism that selects the required staggered bond orientation. Photonic bandstructure calculations reveal that the resulting lattices (direct and inverse) have promising optical properties, including a wide and complete photonic bandgap. The colloidal particles in the self-assembled cubic diamond structure are highly constrained and mechanically stable, which makes it possible to dry the suspension and retain the diamond structure. This makes these structures suitable templates for forming high-dielectric-contrast photonic crystals with cubic diamond symmetry.
ABSTRACT
Sonodynamic therapy has received increasing attention for cancer treatments as an alternative to photodynamic therapy. However, its clinical applications have been limited by the lack of a sonosensitizer that is capable of producing sufficient amounts of reactive oxygen species (ROS) in response to ultrasound (US) exposure. Herein, PEGylated mesoporous silica-titania nanoparticles (P-MSTNs) are prepared and used as US-responsive nanocarriers for cancer sonotheranostics. Perfluorohexane (PFH), which is chosen as the gas precursor, is physically encapsulated into P-MSTNs using the oil-in-water emulsion method. Owing to the vaporization of the gas precursor, PFH@P-MSTNs (137 nm in diameter) exhibit a strong photoacoustic signal in vivo for at least 6 h. Compared to P-MSTNs, PFH@P-MSTNs generate significantly higher amounts of ROS due to the nanobubble-induced cavitation in the presence of US. When systemically administered to tumor-bearing mice, PFH@P-MSTNs effectively accumulate in the tumor site due to the passive targeting mechanism. Consequently, PFH@P-MSTNs show much higher antitumor efficacy than P-MSTNs due to the enhanced cavitation-mediated ROS generation in response to US exposure. It is considered that PFH@P-MSTNs may hold significant potential for cancer sonotheranostics.
Subject(s)
Nanoparticles , Neoplasms , Animals , Mice , Neoplasms/diagnostic imaging , Neoplasms/drug therapy , Silicon Dioxide , TitaniumABSTRACT
Photonic crystals (PCs) are ideal candidates for reflective color pigments with high color purity and brightness due to tunable optical stop band. Herein, the generation of PC microspheres through 3D confined supramolecular assembly of block copolymers (polystyrene-block-poly(2-vinylpyridine), PS-b-P2VP) and small molecules (3-n-pentadecylphenol, PDP) in emulsion droplets is demonstrated. The intrinsic structural colors of the PC microspheres are effectively regulated by tuning hydrogen-bonding interaction between P2VP blocks and PDP, where reflected color can be readily tuned across the whole visible spectrum range. Also, the effects of both PDP and homopolymer (hPS) on periodic structure and optical properties of the microspheres are investigated. Moreover, the spectral results of finite element method (FEM) simulation agree well with the variation of structural colors by tuning the periodicity in PC microspheres. The supramolecular microspheres with tunable intrinsic structural color can be potentially useful in the various practical applications including display, anti-counterfeit printing and painting.
ABSTRACT
Patchy particles with shape complementarity can serve as building blocks for assembling colloidal superstructures. Alternatively, encoding information on patches using DNA can direct assembly into a variety of crystalline or other preprogrammed structures. Here, we present a tool where DNA is used both to engineer shape and to encode information on colloidal particles. Two reactive oil emulsions with different but complementary DNA (cDNA) brushes are assembled into CsCl-like crystalline lattices. The DNA brushes are recruited to and ultimately localized at the junctions between neighboring droplets, which gives rise to DNA-encoded faceted patches. The emulsions are then solidified by ultraviolet (UV) polymerization, producing faceted patchy particles. The facet size and DNA distribution are determined by the balance between the DNA binding energy and the elastic deformation energy of droplets. This method leads to a variety of new patchy particles with directional interactions in scalable quantities.
ABSTRACT
Confining light in extremely small cavities is crucial in nanophotonics, central to many applications. Employing a unique nanoparticle-on-mirror plasmonic structure and using a graphene film as a spacer, we create nanoscale cavities with volumes of only a few tens of cubic nanometers. The ultracompact cavity produces extremely strong optical near-fields, which facilitate the formation of single carbon quantum dots in the cavity and simultaneously empower the strong coupling between the excitons of the formed carbon quantum dot and the localized surface plasmons. This is manifested in the optical scattering spectra, showing a magnificent Rabi splitting of up to 200 meV under ambient conditions. In addition, we demonstrate that the strong coupling is tuneable with light irradiation. This opens new paradigms for investigating the fundamental light emission properties of carbon quantum dots in the quantum regime and paves the way for many significant applications.
ABSTRACT
DNA is a unique molecule for storing information, which is used to provide particular biological instructions. Its function is primarily determined by the sequence of its four nucleobases, which have highly specific base-pairing interactions. This unique feature can be applied to direct the self-assembly of colloids by grafting DNA onto them. Due to the sequence-specific interactions, colloids can be programmed with multiple instructions. Here, we show that particles having multiple DNA strands with different melting profiles can undergo multiple phase transitions and reassemble into different crystalline structures in response to temperature. We include free DNA strands in the medium to selectively switch on and off DNA hybridization depending on temperature. We also demonstrate that DNA hybridization kinetics can be used as a means to achieve targeted assembling structure of colloids. These transitions impart a reconfigurability to colloids in which systems can be transformed an arbitrary number of times using thermal and kinetic control.
Subject(s)
Colloids , DNA , Kinetics , Nucleic Acid Hybridization , Phase TransitionABSTRACT
DNA-mediated colloidal interactions provide a powerful strategy for the self-assembly of ordered superstructures. We report a practical and efficient two-step chemical method to graft DNA brushes onto carboxylated particles, which resolves the previously reported issues such as irreversible aggregation, inhomogeneous coating, and relatively low DNA density that can hinder colloidal crystallization. First, carboxylated particles are functionalized with heterobifunctional poly(ethylene glycol) (NH2-PEGn-N3) by 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMTMM)-activated esterification of carboxylic groups and amide coupling. Then, dibenzocyclooctyne (DBCO)-functionalized DNA strands are grafted onto the pegylated particles through strain-promoted alkyne-azide cycloaddition (SPAAC) on azide groups. The homogeneous PEG brushes provide dispersion stability to the particles and clickable functional groups, resulting in DNA coatings of 1â¯100â¯000 DNA per 1 µm particle or 1 DNA per 2.9 nm2, about five times higher than previously reported. The DNA-coated particles exhibit a sharp association-dissociation transition and readily self-assemble into colloidal crystals upon annealing. In addition, fluorinated particles and lens-shaped particles with carboxylate groups are successfully grafted with DNA strands in this manner. Janus particles are also functionalized with DNA strands selectively on one of the two faces. Owing to the anisotropic attraction, the DNA-coated Janus particles self-assemble into self-limiting aggregates.