Enhanced immune reconstitution with albuvirtide in HIV-infected immunological non-responders.

Background: Incomplete immune recovery in people living with HIV/AIDS (PLWHA) remains an important clinical challenge with the lack of an effective strategy currently available to restore their T-cell immune response. This study aimed to evaluate the effect of Albuvirtide (ABT) on immune recovery in immunological non-responders (INRs) and attempted to explore potential mechanisms of ABT on the functionality of immune cells. Methods: In this prospective, open-label, controlled clinical study, participants with incomplete immune reconstitution (continuous ART over 5 years and CD4+T lymphocyte absolute count of <500 cells/µl or ART for 2-5 years and CD4+T cell count of <200 cells/µl with undetectable viral load) were received intensive treatment with ABT or maintained on the original ART regimen at a ratio of 1:1. Immune response and safety were examined within 24 weeks. In the cytological study, T subsets, cell apoptosis and cell autophagy were analyzed using immunofluorescence staining and flow cytometry from 25 blood specimens. Results: Both groups (n=25 each) were comparable in age, gender, and ART duration. At week 12, CD4+T cell count increased significantly in the intensive ABT group compared with control group (the change from baseline in CD4+T cell count: 45 vs. -5 cells/µL, p<0.001). After ABT discontinuation, CD4+T cell counts remained significantly higher in the intensive ABT group at week 24 (55 vs. -5 cells/µL, p=0.012). In laboratory analysis, naïve CD4+ T cell amounts were lowest among participants with unsatisfactory immune response (uIR) to ABT (p=0.001). The proportion of caspase 3+CD45RA+CD31+CD4+ T cells was significantly lower in participants with satisfactory immune response (sIR) to ABT (p<0.05). Conclusion: Significant CD4+T cell count increase suggests ABT enhances immune function in INRs which may be attributed to its antiviral properties as well as its ability to increase thymic cell output and decrease cell apoptosis.

Deciphering the role of cuproptosis-related lncRNAs in shaping the lung cancer immune microenvironment: A comprehensive prognostic model.

Cuproptosis plays an important role in cancer, but its role in lung cancer remains unknown. Transcriptional profiles, clinical details and mutation data were acquired from the Cancer Genome Atlas database through a variety of methods. The analysis of this publicly available data was comprehensively performed using R software along with its relevant packages, ensuring a thorough examination of the information. In this study, we conducted a detailed analysis of cuproptosis-related genes and lncRNA co-expression, identifying 129 relevant lncRNAs and establishing a prognostic model with four key lncRNAs (LINC00996, RPARP-AS1, SND1-IT1, TMPO-AS1). Utilizing data from TCGA and GEO databases, the model effectively categorized patients into high- and low-risk groups, showing significant survival differences. Correlation analysis highlighted specific relationships between individual lncRNAs and cuproptosis genes. Our survival analysis indicated a higher survival rate in the low-risk group across various cohorts. Additionally, the model's predictive accuracy was confirmed through independent prognostic analysis and ROC curve evaluations. Functional enrichment analysis revealed distinct biological pathways and immune functions between risk groups. Tumour mutation load analysis differentiated high- and low-risk groups by their mutation profiles. Drug sensitivity analysis and immune infiltration studies using the CIBERSORT algorithm further elucidated the potential treatment responses in different risk groups. This comprehensive evaluation underscores the significance of lncRNAs in cuproptosis and their potential as biomarkers for lung cancer prognosis and immune microenvironment.

Recent Progress in MOF-Aerogel Fabrication and Applications.

Recent advancements in metal-organic frameworks (MOFs) underscore their significant potential in chemical and materials research, owing to their remarkable properties and diverse structures. Despite challenges like intrinsic brittleness, powdered crystalline nature, and limited stability impeding direct applications, MOF-based aerogels have shown superior performance in various areas, particularly in water treatment and contaminant removal. This review highlights the latest progress in MOF-based aerogels, with a focus on hybrid systems incorporating materials like graphene, carbon nanotube, silica, and cellulose in MOF aerogels, which enhance their functional properties. The manifold advantages of MOF-based aerogels in energy storage, adsorption, and catalysis are discussed, with an emphasizing on their improved stability, processability, and ease of handling. This review aims to unlock the potential of MOF-based aerogels and their real-world applications. Aerogels are expected to reshape the technological landscape of MOFs through enhanced stability, adaptability, and efficiency.

Epidemiological characteristics and influencing factors of tuberculosis aggregation in schools in Wuhan, China during 2017-2022.

Background: Wuhan is located in the hinterland of China, in the east of Hubei Province, at the intersection of the Yangtze River and Hanshui River. It is a national historical and cultural city, an important industrial, scientific, and educational base, and a key transportation hub. There are many schools in Wuhan, with nearly a thousand of all kinds. The number of students is ~2.2 million, accounting for nearly one-fifth of the resident population; college or university students account for ~60% of the total student population. The geographical location of these colleges is relatively concentrated, and the population density is relatively high, making it prone to tuberculosis cluster epidemic. Objective: This study analyzed the epidemiological characteristics and influencing factors of tuberculosis aggregation in schools in Wuhan, China, during 2017-2022 to provide the basis for the scientific development of tuberculosis prevention and control strategies and measures in schools. Methods: This study adopted the methods of descriptive epidemiology to analyze the epidemic characteristics of tuberculosis aggregation in schools in Wuhan from January 2017 to December 2022, collecting the relevant data on tuberculosis prevention and control in all kinds of schools in the city using Questionnaire Star, an application of the China network questionnaire survey, and analyze the influencing factors of tuberculosis aggregation by using multifactor logistic regression analysis. Results: From 2017 to 2022, 54 outbreaks of pulmonary tuberculosis aggregation in schools were reported in Wuhan, which involved 37 different schools, including 32 colleges or universities and five senior high schools; 176 cases were reported, among which 73 were positive for pathogens and 18 were rifampicin or izoniazid resistant. The median duration of a single cluster epidemic was 46 (26,368) days. Universities were more prone to cluster outbreaks than middle schools (χ2 = 105.160, P = 0.001), and the incidence rate among male students was higher than that of female students in cluster epidemics (χ2 = 12.970, P = 0.001). The multivariate logistic regression analysis results showed that boarding in school (OR = 7.60) is the risk factor for a tuberculosis cluster epidemic in schools. The small number of students (OR = 0.50), the location of the school in the city (OR = 0.60), carry out physical examinations for freshmen (OR = 0.44), carry out illness absence and cause tracking (OR = 0.05), dormitories and classrooms are regularly ventilated with open windows (OR = 0.16), strict implement the management of sick student's suspension from school (OR = 0.36), and seeking timely medical consultation (OR = 0.32) were the protective factors for a tuberculosis cluster epidemic in schools. Conclusion: We successfully identified the epidemiological characteristics and influencing factors of tuberculosis aggregation in schools in Wuhan. The results revealed the influence and status of various factors and indicated ways for schools to improve their TB prevention and control measures in their daily activities. These measures can effectively help curb the cluster epidemic of tuberculosis in schools.

Biomass Solid-State Electrolyte with Abundant Ion and Water Channels for Flexible Zinc-Air Batteries.

Flexible zinc-air batteries are the leading candidates as the next-generation power source for flexible/wearable electronics. However, constructing safe and high-performance solid-state electrolytes (SSEs) with intrinsic hydroxide ion (OH-) conduction remains a fundamental challenge. Herein, by adopting the natural and robust cellulose nanofibers (CNFs) as building blocks, the biomass SSEs with penetrating ion and water channels are constructed by knitting the OH--conductive CNFs and water-retentive CNFs together via an energy-efficient tape casting. Benefiting from the abundant ion and water channels with interconnected hydrated OH- wires for fast OH- conduction under a nanoconfined environment, the biomass SSEs reveal the high water-uptake, impressive OH- conductivity of 175 mS cm-1 and mechanical robustness simultaneously, which overcomes the commonly existed dilemma between ion conductivity and mechanical property. Remarkably, the flexible zinc-air batteries assemble with biomass SSEs deliver an exceptional cycle lifespan of 310 h and power density of 126 mW cm-2. The design methodology for water and ion channels opens a new avenue to design high-performance SSEs for batteries.

Conformal Engineering of Both Electrodes Toward High-Performance Flexible Quasi-Solid-State Zn-Ion Micro-Supercapacitors.

The severe Zn-dendrite growth and insufficient carbon-based cathode performance are two critical issues that hinder the practical applications of flexible Zn-ion micro-ssupercapacitors (FZCs). Herein, a self-adaptive electrode design concept of the synchronous improvement on both the cathode and anode is proposed to enhance the overall performance of FZCs. Polypyrrole doped with anti-expansion graphene oxide and acrylamide (PPy/GO-AM) on the cathode side can exhibit remarkable electrochemical performance, including decent capacitance and cycling stability, as well as exceptional mechanical properties. Meanwhile, a robust protective polymeric layer containing reduced graphene oxide and polyacrylamide is self-assembled onto the Zn surface (rGO/PAM@Zn) at the anode side, by which the "tip effect" of Zn small protuberance can be effectively alleviated, the Zn-ion distribution homogenized, and dendrite growth restricted. Benefiting from these advantages, the FZCs deliver an excellent specific capacitance of 125 mF cm-2 (125 F cm-3) at 1 mA cm-2, along with a maximum energy density of 44.4 µWh cm-2, and outstanding long-term durability with 90.3% capacitance remained after 5000 cycles. This conformal electrode design strategy is believed to enlighten the practical design of high-performance in-plane flexible Zn-based electrochemical energy storage devices (EESDs) by simultaneously tackling the challenges faced by Zn anodes and capacitance-type cathodes.

Expression of macrophage activation­specific factors in hyperplastic scar tissue during hyperplasia phase by antibody array blotting membrane assay and its clinical significance.

The expression of macrophage activation-specific factors in hyperplastic scar (HS) tissues during hyperplasia phase was detected by antibody array imprinted membrane method and the role of macrophage activation in the natural evolution of HS was explored. A total of 83 patients with HS admitted to the Affiliated Hospital of Beihua University (Jilin, China) between February 2021 and July 2021 were enrolled. The clinical data of the patients were retrospectively analyzed. These patients were divided into the hyperplasia HS group (n=26) and the decline HS group (the HS tissues ceased to grow and were in regression periods; n=57) according to the time of scar formation and clinical characteristics. The HS tissues were collected from patients in both groups. The contents of IL-12, IL-10, VEGF and basic fibroblast growth factor (bFGF) were detected by antibody array imprinted membrane method and the contents of IL-12, IL-10, VEGF and bFGF in tissues with various groups of tissues and clinical features were compared. The connection between macrophage activation-specific factors with VEGF and bFGF was analyzed using Pearson correlation analysis. The contents of IL-10 (9.48±1.06), VEGF (24.15±2.64) and bFGF (37.48±2.56) were much lower and IL-12 levels (16.45±0.85) were strongly higher in hyperplasia HS group compared with those in the decline HS group (14.56±1.26 for IL-10, 27.85±2.63 for VEGF, 43.15±3.16 for bFGF and 10.46±0.75 for IL-12, P<0.001). In the hyperplasia HS group, the contents of IL-10, VEGF and bFGF were obviously higher and the IL-12 levels were markedly lower in patients with age ≥30 years, protuberance height <2 mm, soft flexibility, low hyperemia degree and no concomitant symptoms than those in the patients with age <30 years, protuberance height ≥2 mm, hard flexibility, high hyperemia degree and concomitant symptoms (P<0.001). Pearson correlation analysis showed that IL-12 was negatively correlated with VEGF and bFGF (r=-0.328, 0.600, P<0.01). IL-10 was positively correlated with VEGF and bFGF (r=0.486, 0.684, respectively, P<0.001). In conclusion, macrophage activation-specific factors were abnormally expressed in hyperplasia HS, mainly M1 macrophages, accompanied by severe inflammatory reaction. The transformation of M1 macrophage into M2 macrophage usually occurred during the declining HS phase, which accelerated scar formation by promoting the formation of fibroblasts and angiogenesis. Detection of macrophage activation-specific factors may contribute to evaluate the clinical stage of HS.

Diagnostic value of MRI in traumatic triangular fibrocartilage complex injuries: a retrospective study.

BACKGROUND: Triangular fibrocartilage complex (TFCC) injuries commonly manifest as ulnar-sided wrist pain and can be associated with distal radioulnar joint (DRUJ) instability and subsequent wrist functional decline. This study aimed to assess the diagnostic value of MRI compared to wrist arthroscopy in identifying traumatic TFCC injuries and to determine the distribution of different TFCC injury subtypes in a normal clinical setting. METHODS: The data of 193 patients who underwent both preoperative wrist MRI and wrist arthroscopy were retrospectively reviewed. The analysis focused on the proportion of subtypes and the diagnostic value of MRI in traumatic TFCC injuries, utilizing Palmer's and Atzei's classification with wrist arthroscopy considered as the gold standard. RESULTS: The most prevalent subtype of TFCC injuries were peripheral injuries (Palmer 1B, 67.9%), followed by combined injuries (Palmer 1 A + 1B, 14%; Palmer 1B + 1D, 8.3%). Compared with wrist arthroscopy, the diagnostic sensitivity, specificity, negative predictive value (NPV), and Kappa value of MRI was as follows: traumatic TFCC tears 0.99 (95% CI: 0.97-1), 0.90 (0.78-0.96), 0.97 (0.87-1), and 0.93; styloid lamina tears 0.93 (0.88-0.96), 0.53 (0.30-0.75), 0.47 (0.26-0.69), and 0.44; and foveal lamina tears 0.85 (0.74-0.92), 0.38 (0.29-0.49), 0.79 (0.65-0.89), and 0.21. CONCLUSIONS: The diagnostic value of MRI in traumatic TFCC injuries has been confirmed to be almost perfect using Palmer's classification. In more detailed classification of TFCC injuries, such as pc-TFCC tears classified by Atzei's classification, the diagnostic accuracy of MRI remains lower compared to wrist arthroscopy. Radiological associated injuries may offer additional diagnostic value in cases with diagnostic uncertainty.

Polysulfide regulation by defect-modulated Ta3N5-x electrocatalyst toward superior room-temperature sodium-sulfur batteries.

Resolving low sulfur reaction activity and severe polysulfide dissolution remains challenging in metal-sulfur batteries. Motivated by a theoretical prediction, herein, we strategically propose nitrogen-vacancy tantalum nitride (Ta3N5-x) impregnated inside the interconnected nanopores of nitrogen-decorated carbon matrix as a new electrocatalyst for regulating sulfur redox reactions in room-temperature sodium-sulfur batteries. Through a pore-constriction mechanism, the nitrogen vacancies are controllably constructed during the nucleation of Ta3N5-x. The defect manipulation on the local environment enables well-regulated Ta 5d-orbital energy level, not only modulating band structure toward enhanced intrinsic conductivity of Ta-based materials, but also promoting polysulfide stabilization and achieving bifunctional catalytic capability toward completely reversible polysulfide conversion. Moreover, the interconnected continuous Ta3N5-x-in-pore structure facilitates electron and sodium-ion transport and accommodates volume expansion of sulfur species while suppressing their shuttle behavior. Due to these attributes, the as-developed Ta3N5-x-based electrode achieves superior rate capability of 730 mAh g-1 at 3.35 A g-1, long-term cycling stability over 2000 cycles, and high areal capacity over 6 mAh cm-2 under high sulfur loading of 6.2 mg cm-2. This work not only presents a new sulfur electrocatalyst candidate for metal-sulfur batteries, but also sheds light on the controllable material design of defect structure in hopes of inspiring new ideas and directions for future research.

High-Energy-Density Solid-State Metal-Air Batteries: Progress, Challenges, and Perspectives.

Next-generation batteries have long been considered a transition to more sustainable storage technologies. Among them, metal-air batteries (MABs) with low cost, high safety, and environmental friendliness have shown great potential for future large-scale applications. Motivated by the desirable characteristics, significant progress is made in suppressing serious parasitic reactions, improving electrochemical performance, and increasing the energy density in MABs. Compared to the widely reported liquid electrolyte strategy, solid-state electrolytes (SSEs) can thoroughly solve the volatilization challenges of liquid electrolytes and protect the oxygen electrodes without the formation of diffusion-blocking oxide phases. Notably, SSEs for MABs are still in their infancy, and many thorny challenges still need to be solved. In this review, the main electrochemical mechanism, key challenges, and some important progress are sorted out for solid-state MABs, such as lithium-air, zinc-air, aluminum-air, and magnesium-air batteries. Besides their fundamental significance, these configurations are further compared in terms of energy density, cost, carbon footprint, energy consumption, rate performance, cycle performance, safety, and air stability of prevailing electrolytes.

Active-Passive Joint Acoustic Emission Monitoring Test Considering the Heterogeneity of Concrete.

The heterogeneity of concrete is a major challenge for acoustic emission monitoring. A method of active-passive joint acoustic emission monitoring considering the heterogeneity of concrete is presented herein, and the time-frequency-space multi-parameter response characteristics of active and passive acoustic emission signals were studied in relation to the damage evolution of concrete. This method provides an idea of evaluating the damage state of concrete more actively and quantitatively than traditional methods. The results show that the microscopic damage model of concrete based on the acoustic emission penetrating wave velocity and amplitude is in agreement with the damage process of concrete. The standard deviation of the wave velocity up to 1000 m/s and the change rate of the amplitude up to -0.66 can be adopted as two signs that the load of concrete reached 70% of the ultimate load. The time-of-arrival localization based on variable velocity was used to correct the acoustic emission localization results, and the localization accuracy was increased by 44.74%. The damage process of concrete undergoes diverse changes; that is, the distribution of damage changes from heterogeneous to homogeneous and then back to heterogeneous. Hence, it is necessary for researchers to consider the heterogeneity of concrete when using acoustic emission monitoring. The active-passive joint acoustic emission monitoring is an effective method.

Prevalence of and prognosis for poor immunological recovery by virally suppressed and aged HIV-infected patients.

Background: Antiretroviral therapy (ART) prolongs lifespan and decreases mortality of HIV infected patients. However, many patients do not achieve optimal immune reconstitution. The influence of non-optimal immune recovery on non-AIDS related diseases is not well defined in aged HIV-infected patients receiving ART. Methods: A retrospective study was conducted at Tianjin Second People's Hospital, China to evaluate the association of an inadequate immunological response and non-AIDS diseases in HIV infected patients ≥60 years of age and virally suppressed for at least 2 years by ART. Results: The study included patients (n = 666) who initiated ART between August 2009 and December 2020. The prevalence of patients with an inadequate immunological response was 29.6%. The percentage of non-AIDS diseases such as hypertension, cardiovascular disease (CVD), diabetes, tumor, and chronic kidney disease (CKD) was 32.9, 9.9, 31, 4.1, and 13%, respectively. In addition to baseline CD4+ T cell counts, CVD and tumor were associated with poor immune reconstitution in aged Chinese HIV-1 infected patients. The adjusted odds ratios (95% confidence interval) were AOR 2.45 (95% CI: 1.22-4.93) and 3.06 (95% CI: 1.09-8.56, p = 0.03). Inadequate immunological response was associated with greater mortality (AOR: 2.83, 95% CI: 1.42-5.67, p = 0.003) in this cohort. Conclusion: These results tend to demonstrate appropriate drug selection at ART initiation and prevention of non-AIDS complications during ART decreased mortality of and an inadequate immunological response in aged HIV infected patients.

The predictive value of baseline symptom score and the peripheral CD4CD8 double-positive T cells in patients with AECOPD.

BACKGROUND: Accurate prediction of acute exacerbation helps select patients with chronic obstructive pulmonary disease (COPD) for individualized therapy. The potential of lymphocyte subsets to function as clinical predictive factors for acute exacerbations of chronic obstructive pulmonary disease (AECOPD) remains uncertain. METHODS: In this single-center prospective cohort study with a 2-year follow-up, 137 patients aged 51 to 79 with AECOPD were enrolled. We examined the prognostic indicators of AECOPD by analyzing lymphocyte subsets and baseline symptom score. Furthermore, a predictive model was constructed to anticipate the occurrence of respiratory failure in patients experiencing AECOPD. RESULTS: The COPD Assessment Test (CAT) score combined with home oxygen therapy and CD4+CD8+ T cells% to predict respiratory failure in AECOPD patients were the best (the area under the curves [AUC] = 0.77, 95% CI: 0.70-0.86, P < 0.0001, sensitivity: 60.4%, specificity: 86.8%). The nomogram model, the C index, calibration plot, decision curve analysis, and clinical impact curve all indicate the model's good predictive performance. The observed decrease in the proportions of CD4+CD8+ T cells appears to be correlated with more unfavorable outcomes. CONCLUSIONS: The nomogram model, developed to forecast respiratory failure in patients with AECOPD, utilizing variables such as home oxygen therapy, CAT score, and CD4+CD8+ T cells%, demonstrated a high level of practicality in clinical settings. CD4+CD8+ T cells serve as a reliable and readily accessible predictor of AECOPD, exhibiting greater stability compared to other indices. It is less susceptible to subjective influences from patients or physicians. This model facilitated personalized estimations, enabling healthcare professionals to make informed decisions regarding preventive interventions.

On-top plasty combined with modified Bilhaut-Cloquet procedure for reconstructing complicated radial polydactyly.

PURPOSE: To present a surgical technique of combining the on-top plasty with modified Bilhaut-Cloquet procedure for reconstructing a rare type of complicated radial polydactyly and evaluate the outcomes. METHODS: Fourteen complicated radial polydactyly in 13 patients were corrected by combining the on-top plasty with modified Bilhaut-Cloquet procedure. Osteotomies were performed as required, and the acral part of the ulnar thumb was transposed onto the proximal part of the radial thumb. The distal parts of the two thumbs were isolated as neurovascular pedicled composite tissue flaps, including part of the distal phalanx and nail bed, and were attached together in an extra-articular way. The tendons were rebalanced, and the nail bed was reconstructed. Objective and subjective outcomes were assessed. RESULTS: The average follow-up time was 32.4 months (6-60 months). All reconstructed thumbs were rated as good in appearance and function. The mean Vancouver Scar Scale score was 1.3 (range 1-2) and the mean Wang-Gao score of the reconstructed thumbnail was 9.4 (range 8-11). The Tada score for the function of the reconstructed thumb was 5.5 (range 5-6). The main active range of motion (ROM) of the interphalangeal joint (IPJ) was 2.1-38.9°. All parents were satisfied with the outcomes. CONCLUSIONS: Because of the diverse manifestations of thumb polydactyly, individualized surgical treatment is recommended, and careful preoperative planning should be made with the principle of combining the best parts of the two thumbs. By combining an on-top plasty with modified Bilhaut-Cloquet procedure, a satisfactory result can be achieved for treating complicated radial polydactyly.

Bridging Trans-Scale Electrode Engineering for Mass CO2 Electrolysis.

Electrochemical CO2 upgrade offers an artificial route for carbon recycling and neutralization, while its widespread implementation relies heavily on the simultaneous enhancement of mass transfer and reaction kinetics to achieve industrial conversion rates. Nevertheless, such a multiscale challenge calls for trans-scale electrode engineering. Herein, three scales are highlighted to disclose the key factors of CO2 electrolysis, including triple-phase boundaries, reaction microenvironment, and catalytic surface coordination. Furthermore, the advanced types of electrolyzers with various electrode design strategies are surveyed and compared to guide the system architectures for continuous conversion. We further offer an outlook on challenges and opportunities for the grand-scale application of CO2 electrolysis. Hence, this comprehensive Perspective bridges the gaps between electrode research and CO2 electrolysis practices. It contributes to facilitating the mixed reaction and mass transfer process, ultimately enabling the on-site recycling of CO2 emissions from industrial plants and achieving net negative emissions.

Accelerated Multi-step Sulfur Redox Reactions in Lithium-Sulfur Batteries Enabled by Dual Defects in Metal-Organic Framework-based Catalysts.

The sluggish sulfur redox kinetics and shuttle effect of lithium polysulfides (LiPSs) are recognized as the main obstacles to the practical applications of the lithium-sulfur (Li-S) batteries. Accelerated conversion by catalysis can mitigate these issues, leading to enhanced Li-S performance. However, a catalyst with single active site cannot simultaneously accelerate multiple LiPSs conversion. Herein, we developed a novel dual-defect (missing linker and missing cluster defects) metal-organic framework (MOF) as a new type of catalyst to achieve synergistic catalysis for the multi-step conversion reaction of LiPSs. Electrochemical tests and first-principle density functional theory (DFT) calculations revealed that different defects can realize targeted acceleration of stepwise reaction kinetics for LiPSs. Specifically, the missing linker defects can selectively accelerate the conversion of S8 →Li2 S4 , while the missing cluster defects can catalyze the reaction of Li2 S4 →Li2 S, so as to effectively inhibit the shuttle effect. Hence, the Li-S battery with an electrolyte to sulfur (E/S) ratio of 8.9 mL g-1 delivers a capacity of 1087 mAh g-1 at 0.2 C after 100 cycles. Even at high sulfur loading of 12.9 mg cm-2 and E/S=3.9 mL g-1 , an areal capacity of 10.4 mAh cm-2 for 45 cycles can still be obtained.

Reconstruction of Type IIIB Thumb Hypoplasia Using a Vascularized Hemi-Metatarsal Composite Tissue Flap.

BACKGROUND: The aim of this study was to determine the clinical outcomes of vascularized hemi-metatarsal composite tissue transfer for the reconstruction of type IIIB hypoplastic thumbs. METHODS: Twenty-eight patients with type IIIB hypoplastic thumbs treated with vascularized hemi-metatarsal composite tissue transfer were included in this retrospective study with a mean follow-up of 2.4 years. Preoperative digital subtraction angiography was performed to examine the vessel variance. Clinical measures included grip and pinch strength, scar status, and Kapandji thumb opposition score. Subjective Pediatric Outcomes Data Collection Instrument scores and parent satisfaction were also evaluated. RESULTS: Radial arteries were hypoplastic in 82.1% of the cases, and the common palmar digital artery was chosen as the recipient vessel for the tissue transfer. There was no neurovascular complication. The only donor-site complication was a metatarsal fracture that healed with casting. Key pinch and tripod pinch were 29.5% and 45.8% of the normal side, respectively. The mean grip strength was 51.7% of the unaffected side. The mean Kapandji score was 6. The Pediatric Outcomes Data Collection Instrument scores were high for global function; upper extremity function; transfer; and basic mobility, happiness, and comfort. The Vancouver Scar Scale showed an average score of 2.1. All parents were satisfied with the clinical outcomes. CONCLUSION: Vascularized hemi-metatarsal composite tissue transfer for type IIIB thumb hypoplasia can provide improved subjective outcomes and is a feasible method for the attainment of a five-digit hand. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.

Enabling Future Closed-Loop Recycling of Spent Lithium-Ion Batteries: Direct Cathode Regeneration.

The rapid proliferation of electric vehicles equipped with lithium-ion batteries (LIBs) presents serious waste management challenges and environmental hazards for recyclers after scrap. Closed-loop recycling contributes to the sustainable development of batteries and plays an important role in mitigating raw material shortages and supply chain risks. Herein, current direct cathode regeneration methods for industrialized recycling are outlined and evaluated. Different regeneration methods for spent cathode materials are summarized, which provide a new perspective for realizing closed-loop recycling of LIBs. A reference recycling route for retrofitting existing cathode production lines is proposed and minimizes the costs. In addition to promoting the industrialization of direct cathode recycling, the environmental, economic, and political benefits of battery recycling are also highlighted.

Detection of Sleeve Grouting Compactness Based on Acoustic Emission Technology.

Sleeve grouting compactness has a significant effect on the mechanical properties of rebar connections. However, a detection method for the grouting compactness inside the sleeve is still lacking. Therefore, the aim of this paper is to propose a new acoustic emission (AE) detection technology for horizontal defects and vertical defects in sleeves with different grout compactness. The basic waveform characteristic of the AE signal is analyzed. The results show that the count of acoustic emission signals decreases with the increase of grouting compactness, and the reduction rate of vertical defects is larger than that of horizontal defects. The acoustic emission waveform is further processed through wavelet packet decomposition. It is found that with the increase of grouting compactness, the composition of approximately 125-187.5 kHz in the signal is accelerated to approximately 62.5-125 kHz. The grouting compactness index is constructed by wavelet packet energy ratio. With the increase of grouting compactness, the compactness index decreases exponentially, indicating that the presence of defects can greatly reduce the attenuation of elastic wave energy. The compactness index is highly consistent with the size of defects and has little relationship with the distribution of grout materials. Experiments show that the proposed method is effective when grout defects reach a certain degree and provides a new method for sleeve grouting compactness detection.