ABSTRACT
The conductive polymer poly-3,4-ethylenedioxythiophene (PEDOT), recognized for its superior electrical conductivity and biocompatibility, has become an attractive material for developing wearable technologies and bioelectronics. Nevertheless, the complexities associated with PEDOT's patterning synthesis on diverse substrates persist despite recent technological progress. In this study, we introduce a novel deep eutectic solvent (DES)-induced vapor phase polymerization technique, facilitating nonrestrictive patterning polymerization of PEDOT across diverse substrates. By controlling the quantity of DES adsorbed per unit area on the substrates, PEDOT can be effectively patternized on cellulose, wood, plastic, glass, and even hydrogels. The resultant patterned PEDOT exhibits numerous benefits, such as an impressive electronic conductivity of 282 S·m-1, a high specific surface area of 5.29 m2·g-1, and an extensive electrochemical stability range from -1.4 to 2.4 V in a phosphate-buffered saline. To underscore the practicality and diverse applications of this DES-induced approach, we present multiple examples emphasizing its integration into self-supporting flexible electrodes, neuroelectrode interfaces, and precision circuit repair methodologies.
ABSTRACT
Exploiting new solvents on efficiently dissolving cellulose is imperative to promote the utilization of cellulosic resources. The process of cellulose dissolution typically necessitates extreme conditions, such as high-temperature treatment, utilization of potent acidic or basic solvents, or the catalytic action of Lewis acids. As a result, the structure of the cellulose is invariably compromised, subsequently obstructing the creation of high-performance materials. In this study, we address this challenge through a simple process, introducing polyethylene glycol (PEG) as glycosidic bond protecting agent, to preserve the polymerization degree of cellulose during its room-temperature dissolution in ZnCl2-phosporic acid eutectic solvent. The PEG units preferentially coordinate with Zn2+ to weaken the hydrolysis of glycosidic bond of cellulose through ether bond competition. The polymerization degree of regenerated cellulose is thus greatly improved, reaching up to seven times that of unprotected cellulose. Overall, this study offers an easy and cost-effective approach to develop cellulose solvents and provides a significant drive towards the fabrication of practical materials through cellulose dissolution.
ABSTRACT
Lignin solubilization and in situ hydrogenolysis are crucial for reductive catalytic fractionation (RCF) of lignocellulose to aromatic monomers. In this study, we reported a typical hydrogen bond acceptor of choline chloride (ChCl) to tailor the hydrogen-donating environment of the Ru/C-catalyzed hydrogen-transfer RCF of lignocellulose. The ChCl-tailored hydrogen-transfer RCF of lignocellulose was conducted under mild temperature and low-pressure (<1â bar) conditions, which was applicable to other lignocellulosic biomass sources. We obtained an approximate theoretical yield of propylphenol monomer of 59.2â wt % and selectivity of 97.3 % using an optimal content of ChCl (10â wt %) in ethylene glycol at 190 °C for 8â h. When the content of ChCl in ethylene glycol was increased to 110â wt %, the selectivity of propylphenol switched toward propylenephenol (yield of 36.2â wt % and selectivity of 87.6 %). The findings in this work provide valuable information for transforming lignin from lignocellulose into value-added products.
ABSTRACT
Structure design provides an effective solution to develop advanced soft materials with desirable mechanical properties. However, creating multiscale structures in ionogels to obtain strong mechanical properties is challenging. Here, an in situ integration strategy for producing a multiscale-structured ionogel (M-gel) via ionothermal-stimulated silk fiber splitting and moderate molecularization in the cellulose-ions matrix is reported. The produced M-gel shows a multiscale structural superiority comprised of microfibers, nanofibrils, and supramolecular networks. When this strategy is used to construct a hexactinellid inspired M-gel, the resultant biomimetic M-gel shows excellent mechanical properties including elastic modulus of 31.5 MPa, fracture strength of 6.52 MPa, toughness reaching 1540 kJ m-3 , and instantaneous impact resistance of 3.07 kJ m-1 , which are comparable to those of most previously reported polymeric gels and even hardwood. This strategy is generalizable to other biopolymers, offering a promising in situ design method for biological ionogels that can be expanded to more demanding load-bearing materials requiring greater impact resistance.
Subject(s)
Cellulose , Silk , Biopolymers , Silk/chemistryABSTRACT
Protolignin extraction can facilitate structure elucidation and valorization of lignin in biorefinery, but is rather challenging due to the complex chemical bonds present. Here, we developed the in situ generated NH3-reline (IGNR) system to realize one-pot protolignin extraction from lignocellulose. In the IGNR system, reline consisting of choline chloride and urea acted as both a solvent and a nucleophile generator, and the nucleophilic addition-elimination mechanism was verified by model compound studies. The in situ generated NH3 could precisely cleave the lignin-carbohydrate esters in lignocellulose with a near-quantitative retention of carbohydrates. The extracted IGNR-Protolignin exhibited native lignin substructure with high molecular weight and high ß-O-4' content (41.5 per 100 aromatic units). In addition, the up-scaled kilogram reaction demonstrated the feasibility of the IGNR system for potential industrial application in a green and sustainable pathway. This work represents a breakthrough toward protolignin extraction in practice with the future goal of achieving total biorefinery.
ABSTRACT
An in-depth understanding of the electronic structures of catalytically active centers and their surrounding vicinity is key to clarifying the structure-activity relationship, and thus enabling the design and development of novel metal-free carbon-based materials with desired catalytic performance. In this study, boron atoms are introduced into phosphorus-doped nanoporous carbon via an efficient strategy, so that the resulting material delivers better catalytic performance. The doped B atoms alter the electronic structures of active sites and cause the adjacent C atoms to act as additional active sites that catalyze the reaction. The B/P co-doped nanoporous carbon shows remarkable catalytic performance for benzyl alcohol oxidation, achieving high yield (over 91% within 2 h) and selectivity (95%), as well as low activation energy (32.2 kJ mol-1 ). Moreover, both the conversion and selectivity remain above 90% after five reaction cycles. Density functional theory calculations indicate that the introduction of B to P-doped nanoporous carbon significantly increases the electron density at the Fermi level and that the oxidation of benzyl alcohol occurs via a different reaction pathway with a very low energy barrier. These findings provide important insights into the relationship between catalytic performance and electronic structure for the design of dual-doped metal-free carbon catalysts.
ABSTRACT
Abundant and renewable cellulose is a potential candidate for petroleum-derived synthetic polymers. However, the efficient dissolution of this material is problematic because of the high cost, severe reaction condition (e.g., high temperature) and environmentally unfriendly (e.g., toxic reagents, and solvent recyclability). Herein, to realize the room temperature dissolution of cellulose with an inexpensive and eco-friendly solvent, we design a novel low-cost deep eutectic solvent that is composed of zinc chloride, water and phosphoric acid for the efficient dissolution of cellulose. This solvent is featured as having both the superior hydrogen bonding acidity and the hydrogen bonding basicity, and thus can act as a hydrogen bond molecular scissors to cleave the hydrogen bonds within cellulose. In this process, microcrystalline cellulose can be easily dissolved in the solvent at room temperature with a dissolution ratio up to 15 wt%. The dissolved cellulose can also be recovered without any derivatization. The universality, recyclability and pilot production of dissolving cellulose using this solvent are also demonstrated. This work provides a new strategy for the design of novel deep eutectic solvent capable of disrupting the hydrogen bonds of cellulose under mild conditions.