ABSTRACT
For environmental applications, it is crucial to rationally design and synthesize photocatalysts with positive exciton splitting and interfacial charge transfer. Here, a novel Ag-bridged dual Z-scheme Ag/g-C3N4/CoNi-LDH plasmonic heterojunction was successfully synthesized using a simple method, with the goal of overcoming the common drawbacks of traditional photocatalysts such as weak photoresponsivity, rapid combination of photo-generated carriers, and unstable structure. These materials were characterized by XRD, FT-IR, SEM, TEM UV-Vis/DRS, and XPS to verify the structure and stability of the heterostructure. The pristine LDH, g-C3N4, and Ag/g-C3N4/CoNi-LDH composite were investigated as photocatalysts for water remediation, an environmentally motivated process. Specifically, the photocatalytic degradation of tetracycline was studied as a model reaction. The performance of the supports and composite catalyst were determined by evaluating both the degradation and adsorption phenomenon. The influence of several experimental parameters such as catalyst loading, pH, and tetracycline concentration were evaluated. The current study provides important data for water treatment and similar environmental protection applications.
Subject(s)
Nanocomposites , Photolysis , Silver , Water Pollutants, Chemical , Water Purification , Nanocomposites/chemistry , Water Pollutants, Chemical/chemistry , Water Purification/methods , Silver/chemistry , Catalysis , Nitriles/chemistry , Nitrogen Compounds/chemistry , Adsorption , GraphiteABSTRACT
An electrochemical platform for signal amplification probing chloride ions (Cl-) is constructed by the composite integrating core-shell structured nitrogen-doped porous carbon@Ag-based metal-organic frameworks (NC@Ag-MOF) with polypyrrole (PPy). It is based on the signal of solid-state AgCl derived from Ag-MOF, since both NC and PPy have good electrical conductivity and promote the electron transport capacity of solid-state AgCl. NC@Ag-MOF was firstly synthesized with NC as the scaffold and then, PPy was anchored on NC@Ag-MOF by chemical polymerization. The composite NC@Ag-MOF-PPy was utilized to modify the electrode, which exhibited a higher peak current and lower peak potential during Ag oxidation compared with those of Ag-MOF and NC@Ag-MOF-modified electrodes. More importantly, in the coexistence of chloride (Cl-) ions in solution, the NC@Ag-MOF-PPy-modified electrode displayed a fairly stable and sharp peak of solid-state AgCl with the peak potentials gradually approaching zero, which might effectively overcome the background interference caused by electroactive substances. The oxidation peak currents of solid-state AgCl increased linearly with the concentration of Cl- ions in a broad range of 0.15 µM-40 mM and 40-250 mM, with detection limits of 0.10 µM and 40 mM, respectively. The practical applicability for Cl- ions determination was demonstrated using human serum and urine samples. The results suggest that NC@Ag-MOF-PPy composite could be a promising candidate for the construction of the electrochemical sensor.
ABSTRACT
The acidic electrocatalytic conversion of CO2 to multi-carbon (C2+) oxygenates is of great importance in view of enhancing carbon utilization efficiency and generating products with high energy densities, but suffering from low selectivity and activity. Herein, we synthesized Ag-Cu alloy catalyst with highly rough surface, by which the selectivity to C2+ oxygenates can be greatly improved. In a strongly acidic condition (pH=0.75), the maximum C2+ products Faradaic efficiency (FE) and C2+ oxygenates FE reach 80.4% and 56.5% at -1.9 V versus reversible hydrogen electrode, respectively, with a ratio of FEC2+ oxygenates to FEethylene up to 2.36. At this condition, the C2+ oxygenates partial current density is as high as 480 mA cm-2. The in situ Raman measurements and control experiments indicate that the high generation of C2+ oxygenates over the catalyst originates from its large surface roughness and Ag alloying.
ABSTRACT
The current situation involves an increase in interest in nanotechnology, in particular the ways in which it can be applied in the commercial and medical fields. However, traditional methods of synthesizing nanoparticles have some drawbacks, including the generation of harmful byproducts, high energy consumption, and cost. As a result, researchers have shifted their focus to "green" nanoparticle synthesis to circumvent these drawbacks. Because of their exceptional physiochemical properties, silver nanoparticles (Ag Nps) are the noble metal nanoparticles that are used most frequently. The green approach to Ag NP synthesis is environmentally friendly, non-toxic, and cost-effective, and it makes use of a variety of biological entities. Cyanobacteria, in particular, have garnered the most attention because of the abundance of bioactive substances that they contain, which serve both as reducing agents and as stabilizing agents during the process of biosynthesis. This review article discusses the current state of cyanobacteria-mediated Ag NP synthesis, the potential mechanisms that are involved, nanoparticle characterization, the various applications of Ag NP in different fields, and their prospects.
ABSTRACT
This paper serves as a Part II follow-up of our research investigations performed on the molecular structures of silver(I)-fluoride (SF) and diammine-silver(I) fluoride (SDF) complexes in solution-based commercial products for clinical application, their precise chemical compositions, and their nature in aqueous solution, the latter including rapid fluoride-exchange processes at the silver(I) ion centre monitored by 19F NMR analysis (Part I). Part I of this series also explores the mechanisms of action (MoA) of these complexes, and is therefore largely focused on their chemical reactions with constituents of human saliva, which has access to their sites of application. Such reactions were found to slowly promote the generation of potentially physiologically-active Ag/AgCl nanoparticles from primarily-generated discoloured silver(I) chloride (AgCl) precipitates, a process involving salivary electron-donors such as thiocyanate and L-cysteine. Since this research has shed new light on potential MoAs for these products, in this accompanying report (Part II), we have performed a critical review of scientific literature in order to rationalize our results in relation to current views on these mechanisms for SF and SDF products employed for the successful clinical arrest of dental caries. Following an Introduction to the subject matter ( Section 1), this paper comprises a generalized overview of silver coordination chemistry ( Section 2), which is followed by a section focused on the aqueous solution status and equilibria involved in SF chemistry ( Section 3), the latter including results acquired from an original simulation of the electronic absorption spectra of coloured SF complexes in aqueous solution (Section 3.1). Section 4 then investigates detailed rationales for the biologically-relevant ligand-exchange and redox chemistries, disposition and fates of SF, SDF and silver(I)-nitrate when employed for the treatment of dental caries, with emphasis placed on their therapeutic MoAs. This Section is supported by the provision of valuable information centralized on (1) relevant biomolecular chemistry involved in solution- and solid-state matrices ( Section 4.1); (2) SF and perhaps silver(I)-nitrate as more cost-effective alternatives to SDF therapies ( Section 4.2); and (3) the potential therapeutic benefits and effects offered by silver-based nanoparticles and their associated MoAs ( Section 4.3). Recommendations for future investigations in this area are proposed.
ABSTRACT
Transcatheter arterial embolization (TAE) in interventional therapy and tumor embolism therapy plays a significant role. The choice of embolic materials that have good biocompatibility is an essential component of TAE. For this study, we produced a multifunctional PVA embolization material that can simultaneously encapsulate Ag2S quantum dots (Ag2S QDs) and BaSO4 nanoparticles (BaSO4 NPs), exhibiting excellent second near-infrared window (NIR-II) fluorescence imaging and X-ray imaging, breaking through the limitations of traditional embolic microsphere X-ray imaging. To improve the therapeutic effectiveness against tumors, we doped the doxorubicin (DOX) antitumor drug into microspheres and combined it with a clotting peptide (RADA16-I) on the surface of microspheres. Thus, it not only embolizes rapidly during hemostasis but also continues to release and accelerate tumor necrosis. In addition, Ag2S/BaSO4/PVA microspheres (Ag2S/BaSO4/PVA Ms) exhibited good blood compatibility and biocompatibility, and the results of embolization experiments on renal arteries in rabbits revealed good embolic effects and bimodal imaging stability. Therefore, they could serve as a promising medication delivery embolic system and an efficient biomaterial for arterial embolization. Our research work achieves the applicability of NIR-II and X-ray dual-mode images for clinical embolization in biomedical imaging.
ABSTRACT
BACKGROUND: Tobacco mosaic virus (TMV) is a highly infectious plant virus that affects a wide variety of plants and reduces crop yields around the world. Here, we assessed the effectiveness of using Ammi visnaga aqueous seed extract to synthesize silver nanoparticles (Ag-NPs) and their potential to combat TMV. Different techniques were used to characterize Ag-NPs, such as scanning and transmission electron microscopy (SEM, TEM), energy-dispersive X-ray spectroscopy (EDS), fourier transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS). RESULTS: TEM demonstrated that the synthesized Ag-NPs had a spherical form with an average size of 23-30 nm and a zeta potential value of -15.9 mV, while FTIR revealed various functional groups involved in Ag-NP stability and capping. Interestingly, the Pre-treatment of tobacco plants (protective treatment) with Ag-NPs at 100-500 µg/mL significantly suppressed viral symptoms, while the Post-treatment (curative treatment) delayed their appearance. Furthermore, protective and curative treatments significantly increased chlorophyll a and b, total flavonoids, total soluble carbohydrates, and antioxidant enzymes activity (PPO, POX and CAT). Simultaneously, the application of Ag-NPs resulted in a decrease in levels of oxidative stress markers (H2O2 and MDA). The RT-qPCR results and volcano plot analysis showed that the Ag-NPs treatments trigger and regulate the transcription of ten defense-related genes (SbWRKY-1, SbWRKY-2, JERF-3, GST-1, POD, PR-1, PR-2, PR-12, PAL-1, and HQT-1). The heatmap revealed that GST-1, the primary gene involved in anthocyanidin production, was consistently the most expressed gene across all treatments throughout the study. Analysis of the gene co-expression network revealed that SbWRKY-19 was the most central gene among the studied genes, followed by PR-12 and PR-2. CONCLUSIONS: Overall, the reported antiviral properties (protective and/or curative) of biosynthesized Ag-NPs against TMV lead us to recommend using Ag-NPs as a simple, stable, and eco-friendly agent in developing pest management programs against plant viral infections.
Subject(s)
Metal Nanoparticles , Nicotiana , Plant Diseases , Plant Extracts , Silver , Tobacco Mosaic Virus , Tobacco Mosaic Virus/physiology , Silver/pharmacology , Plant Diseases/virology , Plant Diseases/genetics , Plant Extracts/pharmacology , Nicotiana/genetics , Nicotiana/virology , Disease Resistance/genetics , Transcription Factors/genetics , Transcription Factors/metabolism , Plant Proteins/genetics , Plant Proteins/metabolism , Gene Expression Regulation, PlantABSTRACT
Because of its superior strength, esthetic properties, and excellent biocompatibility, zirconia is preferred for dental prosthetic such as crowns and bridges. However, zirconia crowns and bridges are susceptible to secondary caries owing to margin leakage. Silver is a well-known antibacterial agent, making it a desirable additive to zirconia crowns and bridges for secondary caries prevention. This study focuses on imparting zirconia composite with antibacterial properties to enhance its protective capacity in dental restorations. We used the sol-gel method to dope Ag into zirconia. Silver-doped zirconia powders were prepared at Zr:Ag molar ratios of 100:0,100:0.1, 100:0.5, 100:1, 100:3, and 100:5 (respective samples denoted as Ag-0, Ag-0.1, Ag-0.5, Ag-1, Ag-3, and Ag-5) and were subjected to firing at various temperatures (400 °C-1000 °C). We performed x-ray diffraction to investigate the crystal phase of these powders and x-ray fluorescence and field emission scanning electron microscopy to analyze their elemental composition and surface morphology, respectively. Moreover, we performed spectrophotometry to determine theL*a*b* color values, conducted dissolution tests, and quantified the Ag content through inductively coupled plasma optical emission spectroscopy. In addition, we studied the antibacterial activity of the samples. Analyses of the samples fired at ⩽600 °C revealed a predominantly white to grayish-white coloration and a tetragonal crystal phase. Firing at ⩾700 °C resulted in gray or dark gray coloration and a monoclinic crystal phase. The Ag content decreased after firing at 900 °C or 1000 °C. Ag-0.5 and above exhibited antibacterial activity against bothEscherichia coliandStaphylococcus aureus. Therefore, the minimum effective silver-doped zirconia sample was found to be Ag-0.5. This study allows the exploration of the antimicrobial potential of silver-doped zirconia materials in dental applications such as prosthdontical lining materials, promoting the development of innovative restorations with protective capacity against secondary caries.
Subject(s)
Anti-Bacterial Agents , Materials Testing , Silver , X-Ray Diffraction , Zirconium , Zirconium/chemistry , Silver/chemistry , Silver/pharmacology , Anti-Bacterial Agents/chemistry , Anti-Bacterial Agents/pharmacology , Microbial Sensitivity Tests , Dental Materials/chemistry , Dental Materials/pharmacology , Staphylococcus aureus/drug effects , Microscopy, Electron, Scanning , Powders , Surface Properties , Escherichia coli/drug effects , HumansABSTRACT
The molecular laser-induced plasma (LIP) produced during the ablation of silver sulfide (Ag2S) was used as a medium for high-order harmonic generation in the extreme ultraviolet range. The role of LIP formation, the plasma components, and the geometry of plasma in the harmonic conversion efficiency was analyzed. We also analyzed the influence of the driving pulses (chirp, single-color pump, two-color pump, and delay between heating and converting pulses) on the harmonic yield in Ag2S LIP. The application of molecular plasma was compared with the application of atomic plasma, which comprised similar metallic elements (Ag) as well as other metal LIPs. The harmonics from the Ag2S LIP were 4 to 10 times stronger than those from the Ag LIP. The harmonics up to the 59th order were achieved under the optimal conditions for the molecular plasma.
Subject(s)
Plasma Gases , Silver Compounds , Silver Compounds/chemistry , LasersABSTRACT
Triphenylamine (TPA) and N-heterotriangulene (N-HTA) scaffolds with up to three oligophenyl extensions are investigated by electrospray ionization (tandem) mass spectrometry (ESI-[MS/]MS). Due to their low oxidation potentials, all molecules readily form radical cations in the electrospray process. The energy-resolved collision-induced dissociation behaviour of the molecular ions is contrasted to that of the silver(I) adducts. Complexation with Ag(I) leads to the expected [1:1] and [2:1] complexes (MAg+ and M2Ag+); however, even [1:2] complexes (MAg2 2+) can be detected for molecules with two and three large π-expansions to allow stabilization of two charges. The TPA scaffolds decompose only at high collision energies through the loss of peripheral tert-butyl groups. A general mechanism for this is proposed commencing with a methyl loss and followed by the release of isobutene and butyl radical moieties. The N-HTA-based scaffolds are considerably less stable and molecular ions fragment at low collision energies. This is caused by the facile loss of methyl radicals from the dimethylmethylene-bridged triangulene core. In contrast, complexation with Ag+ leads to a dramatic stabilization. Most interestingly, dissociation eventually proceeds via the loss of neutral AgCH3, which is indicative of strong bidentate, tweezer-like bonding of Ag+ to the molecules.
ABSTRACT
Reducing fruit and vegetable waste and maintaining quality has become challenging for everyone. Nanotechnology is a new and intriguing technology that is currently being implemented in fruit and vegetable preservation. Silver nanomaterials provide superior antibacterial qualities, biodegradability, and biocompatibility, which expands their potential applications in fruit and vegetable preservation. Silver nanomaterials include silver nanocomposites and Ag-MOF, of which silver nanocomposites are mainly composed of silver nanoparticles. Notably, not all kinds of silver nanoparticles utilized in the preservation of fruits and vegetables are thoroughly described. Therefore, the synthesis, mechanism of action, and advancements in research on silver nanocomposites for fruit and vegetable preservation were discussed in this study.
ABSTRACT
Metallic nanoparticles have gained attention in technological fields, particularly photonics. The creation of silver/gold (Ag/Au) alloy NPs upon laser exposure of an assembly of these NPs was described. First, using the Nd: YAG pulsed laser ablation's second harmonic at the same average power and exposure time, Ag and Au NPs in distilled water were created individually. Next, the assembly of Ag and Au NP colloids was exposed again to the pulsed laser, and the effects were examined at different average powers and exposure times. Furthermore, Ag/Au alloy nanoparticles were synthesized with by raising the average power and exposure time. The absorption spectrum, average size, and shape of alloy NPs were obtained by using an ultraviolet-visible (UV-Vis) spectrophotometer and transmission electron microscope instrument. Ag/Au alloy NPs have been obtained in the limit of quantum dots (<10 nm). The optical band gap energies of the Ag/Au alloy colloidal solutions were assessed for different Ag/Au alloy NP concentrations and NP sizes as a function of the exposure time and average power. The experimental data showed a trend toward an increasing bandgap with decreasing nanoparticle size. The nonlinear optical characteristics of Ag/Au NPs were evaluated and measured by the Z-scan technique using high repetition rate (80 MHz), femtosecond (100 fs), and near-infrared (NIR) (750-850 nm) laser pulses. In open aperture (OA) Z-scan measurements, Ag, Au, and Ag/AuNPs present reverse saturation absorption (RSA) behavior, indicating a positive nonlinear absorption (NLA) coefficient. In the close-aperture (CA) measurements, the nonlinear refractive (NLR) indices (n2) of the Ag, Au, and Ag/Au NP samples were ascribed to the self-defocusing effect, indicating an effective negative nonlinearity for the nanoparticles. The NLA and NLR characteristics of the Ag/Au NPs colloids were found to be influenced by the incident power and excitation wavelength. The optical limiting (OL) effects of the Ag/Au alloy solution at various excitation wavelengths were studied. The OL effect of alloy NPs is greater than that of monometallic NPs. The Ag/Au bimetallic nanoparticles were found to be more suitable for optical-limiting applications.
ABSTRACT
Diagnostic assays that are able to detect foot-and-mouth disease (FMD) virus infection in the vaccinated population are essential tools in the progressive control pathway for the FMD. However, testing of serum samples using a single diagnostic assay may not completely substantiate freedom from the virus infection. Therefore, viral non-structural proteins (NSPs)-based various serological assays have been developed for the detection of FMD infection. Nevertheless, the NSPs-based ELISAs have been developed in the indirect-ELISA format, thereby necessitating the use of species-specific conjugated secondary-antibodies for the detection of anti-NSP antibodies in various FMD-susceptible species. Therefore, this study presents a novel recombinant 2B-NSP-based indirect ELISA, employing HRP-conjugated protein-A/G detection system which can detect anti-NSPs antibodies from multiple FMD-susceptible species in a single ELISA platform. Recombinant 2B (r2B) protein was expressed as His-SUMO tagged protein in the E. Coli cells and purified using NI-NTA affinity column chromatography. Using the r2B protein and HRP-conjugated protein A/G, an indirect ELISA was developed and validated for the detection of anti-2B antibodies in serum samples collected from multiple FMD-susceptible animal species with known FMD status. Further, a resampling based statistical technique has been reported for determination of optimal cut-off value for the diagnostic assay. Through this technique, the optimal cut-off of 44 percentage of positivity value was determined for the assay. At this optimal cut-off value, the developed diagnostic assay provided diagnostic sensitivity, specificity, and accuracy, positive and negative predictive values (PPV and NPV) of 92.35 %, 98.41 %, 95.21 %, 98.58 %, and 91.67 %, respectively. The assay was validated further by analyzing random serum samples collected across multi-locations in India. The assay can be used as a single platform for testing serum samples from different species of FMDV-susceptible animals and will be useful for NSP-based serosurveillance of FMDV.
ABSTRACT
BACKGROUND: NO2- and S2- are two kinds of common toxic anions widely distributed in environmental water, soil and food products. Human beings have suffered a lot of diseases from intake of excessive NO2- or S2-, i.e., infantile methemoglobin, cancer and even to death. Although tremendous efforts have been afforded to monitor NO2- and S2-, most were high instrument-depended with complex processing procedures. To keep food safety and to protect human health, it will be a huge challenge to develop a convenient and efficient way to monitor S2- and NO2- in practice. RESULTS: A kind of folic acid capping Bi3+-doped Ag quantum dots (FA@Bi3+-Ag QDs) was developed for the first time by one-pot homogeneous reduced self-assembly. Not only did FA@Bi3+-Ag QDs possess intrinsic fluorescent property, it expressed synergistic peroxidase-like activity to catalyze the redox of 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2 with Km/vmax of 0.087 mM/6.61 × 10-8 M s-1 and 6.42 mM/6.25 × 10-7 M s-1 respectively. Interestingly, trace S2- could exclusively alter its fluorescent property and peroxidase-like activity, exhibiting significant hypochromic and "turn-on" fluorescent effects. While trace NO2- could make FA@Bi3+-Ag QDs-TMB-H2O2 system hyperchromic. Under the optimized conditions, FA@Bi3+-Ag QDs were applied for dual-mode recognition of S2- and visual sensing of NO2- in real food samples with satisfactory recoveries, i.e., 100.7-107.9 %/95.8-104.7 % and 97.2-104.8 % respectively. The synergistic enzyme-mimic mechanism of FA@Bi3+-Ag QDs and its selective response mechanisms to S2- and NO2- were also proposed. SIGNIFICANCE: This represents the first nanozyme-based FA@Bi3+-Ag QDs system for dual-mode recognition of S2- and visual sensing of NO2-, well meeting the basic requirement in drinking water set by WHO. It will offer a promising way for multi-mode monitoring of different pollution using the same nanozyme-based sensor.
Subject(s)
Folic Acid , Quantum Dots , Silver , Quantum Dots/chemistry , Folic Acid/chemistry , Silver/chemistry , Nitrites/analysis , Nitrites/chemistry , Hydrogen Peroxide/chemistry , Humans , Benzidines/chemistry , Limit of Detection , Oxidation-ReductionABSTRACT
The study presents Ag2CrO4/Fe2O3/CeO2 ternary nanocomposite, based on Fe2O3/CeO2 binary composites, which demonstrated excellent photocatalytic performance in the photodegradation of methylene blue under solar irradiation. The Ag2CrO4/Fe2O3/CeO2 nanocomposites was orthorhombic, ilmenite, and cubic-fluorite phases of Ag2CrO4, Fe2O3, and CeO2, respectively, according to the XRD examination. A strong bond between Ag2CrO4, Fe2O3, and CeO2 within the nanocomposite was demonstrated by the SEM and TEM investigations. Moreover, it was discovered that the coupling of Ag2CrO4 and Fe2O3 caused a red shift and moved CeO2 absorption edge from the UV to the visible spectrum. The reason behind this is that the band gap of CeO2 reduced 2.85 to 2.69 eV and the absorbance band intensity increased in visible region. Utilizing visible light, Ag2CrO4/Fe2O3/CeO2 ternary nanocomposites exhibit enhanced photocatalytic properties (98.90%) for the degradation of methylene blue (MB) within 100 min. The long-term reliability and recyclability of the photocatalyst were explored through 3 successive cycles. An active radical quenching test was conducted to elucidate the involvement of O2 - and OH which are the primary reactive species in the photocatalytic breakdown of MB. Ag2CrO4/Fe2O3/CeO2 ternary nanocomposites displayed notable improvements in photodegradation activity, making them well suited for the effective removal of hazardous dyes present in textile effluents.
Subject(s)
Cerium , Ferric Compounds , Methylene Blue , Nanocomposites , Photolysis , Nanocomposites/chemistry , Cerium/chemistry , Catalysis , Methylene Blue/chemistry , Ferric Compounds/chemistry , Photochemical Processes , Silver Compounds/chemistry , Silver/chemistry , Particle SizeABSTRACT
Most of the artworks stored in museums are often kept in inappropriate climatic and environmental conditions that facilitate the formation and growth of microorganisms, such as fungi, which are responsible for many types of biodegradation phenomena. To mitigate and prevent these deteriorative processes, functionalized packaging materials can be used for the storage and handling of artworks. The aim of this study was to develop a potential anti-biodeterioration coating suitable for packaging purposes. TiO2 and ZnO doped with different amounts of Ag (0.5 wt%, 1 wt%, and 3 wt%) were synthesized and dispersed in polyvinyl alcohol (PVA) and acrylic resin (Paraloid B72), then applied on different types of packaging materials (cellulose and the high-density spunbound polyethylene fiber Tyvek®, materials that are frequently used as packaging in museums). Analytical investigations (SEM/EDS, Raman, FTIR, and XRD) were employed to assess dispersion on the packaging material. Furthermore, resistance against biodeteriogens was assessed using Cladosporium sp., a bioluminometer, to define the biocidal efficacy.
ABSTRACT
Zika virus, a mosquito-borne arbovirus, has repeatedly caused large pandemics with symptoms worsening from mild and self-limiting diseases to Guillain-Barré syndrome in adults and fetal microcephaly in newborns. In recent years, Zika virus diseases have posed a serious threat to human health. The shortage of susceptible small animal models makes it difficult to study pathogenic mechanisms and evaluate potential therapies for Zika virus infection. Therefore, we chose immunocompromised mice (AG129 mice) deficient in IFN-α/ß and IFN-γ receptors, which can abolish the innate immune system that prevents Zika virus infection early. AG129 mice were infected with the Zika virus, and this mouse model exhibited replication dynamics, tissue tropism, pathological lesion and immune activation of the Zika virus. Our results suggest that the inoculum dose of Zika virus can affect the viral replication dynamics, cytokine responses and survival rate in AG129 mice. By testing the potential antiviral drug favipiravir, several critical indicators, including replication dynamics and survival rates, were identified in AG129 mice after Zika virus infection. It is suggested that the model is reliable for drug evaluation. In brief, this model provides a potential platform for studies of the infectivity, virulence, and pathogenesis of the Zika virus. Moreover, the development of an accessible mouse model of Zika virus infection will expedite the research and deployment of therapeutics and vaccines.
Subject(s)
Cytokines , Disease Models, Animal , Immunocompromised Host , Virus Replication , Zika Virus Infection , Zika Virus , Animals , Zika Virus/immunology , Zika Virus/pathogenicity , Zika Virus Infection/immunology , Zika Virus Infection/virology , Virus Replication/drug effects , Mice , Cytokines/metabolism , Survival Rate , Receptor, Interferon alpha-beta/genetics , Antiviral Agents/pharmacology , Antiviral Agents/therapeutic use , Receptors, Interferon/deficiency , Receptors, Interferon/genetics , Receptors, Interferon/metabolism , Interferon gamma Receptor , Vero CellsABSTRACT
Catalytic ozone (O3) decomposition is a promising technology for curbing indoor O3 pollution, whereas its application is limited by the stability and moisture resistance of heterogeneous catalysts. Ag-Hollandite is a capable solution, but its facile synthesis still lacks systematic investigation. In this study, Ag-Hollandite catalysts were prepared using AgMnO4 as the precursor by reflux (AMO-Re), hydrothermal (AMO-HT), and homogeneous (AMO-HR) methods, respectively. The as-prepared samples showed excellent stability under moisture conditions, with the optimal one maintaining an O3 conversion rate of 99.19 % after 100 h. In the characterization results, Ramsdellite (R-MnO2) was identified as an intermediate species in the synthesis. AMO-HR exhibits higher activity due to enhanced active site exposure and weakened adsorption towards *OO species, while reduced surface hydroxyl content was a crucial factor for moisture resistance. This study aims to contribute insights for preparing catalysts by a facile method.
ABSTRACT
Membrane-contamination during electrodialysis (ED) process is still a non-negligible challenge, while irreversible consumption and unsustainability have become the main bottlenecks limiting the improvement of anion exchange membranes (AEMs) anti-contamination activity. Here, we introduce a novel approach to design AEMs by chemically assembling 4-pyndinepropanol with bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO) in an electrochromic-inspired process. Subsequently, the co-mingled TiO2@Ag nanosheet with the casting-solution were sprayed onto the surface of the substrate membrane to create a micrometer-thick interfacial layer. The addition of Ag nanoparticles (NPs) enhances the active sites of TiO2, resulting in stronger local surface plasmon resonance (LSPR) effects and reducing its energy band gap limitation (From 3.11 to 2.63 eV). Post-electrodialysis electrochromic AEMs incorporating TiO2@Ag exhibit synergistic enhancement of sunlight absorption, effectively suppressing photogenerated carrier binding and promoting migration. These resultant-membranes demonstrate significantly improved bacterial inhibition properties (42.0-fold increase for E. coli) and degradation activity (7.59-fold increase for rhodamine B) compared to pure TiO2 membranes. Importantly, they maintain photocatalytic activity without compromising salt-separation performance or stability, as the spraying process utilizes the same substrate materials. This approach to rational design and regulation of anti-contamination AEMs offers new insights into the collaborative synergy of color-changing and photocatalytic materials.
ABSTRACT
During the operation of synaptic devices based on traditional conductive filament (CF) models, the formation and dissolution of CFs are usually uncertain. Moreover, when the device is operated for a long time, the CFs may dissolve due to both the Joule heat generated by the device itself and the thermal coupling between the devices. These problems seriously reduce the reliability and stability of the synaptic device. Here, an artificial synapse device based on polyimide-molybdenum disulfide quantum dot (MoS2 QD) nanocomposites is presented. Research has shown that MoS2 QDs doped into the active layer can effectively induce the reduction of Ag ions into Ag atoms, leading to the formation of Ag clusters and thereby achieving control over the growth of the CFs. Therefore, the device is capable of stably realizing various basic synaptic functions. Moreover, the long-term potentiation/long-term depression (LTP/LTD) of this device shows good linearity. In addition, due to the change in the shape of the CFs, the highly integrated devices with a three-dimensional (3D) stacked structure can operate normally even in a high-temperature environment of 110 °C. Finally, the synaptic characteristics of the devices on learning and inference tests show that their recognition rates are approximately 90.75% (room temperature) and 90.63% (110 °C).