ABSTRACT
Chlorophenols are one of the major organic pollutants responsible for the contamination of water bodies. This study explores the application of Ni-Zn/CeO2 nanocomposites, synthesized via the aqueous co-precipitation method, as effective adsorbents for the 4-chlorophenol removal from aqueous solutions. The nanocomposites' chemical and structural characteristics were assessed using different physical characterization methods, viz. X-ray diffraction, transmission electron microscopy, Fourier transform infrared spectroscopy, zeta potential, using a Box-Behnken design within response surface methodology, optimal conditions of pH 3, temperature 20 °C, contact time 120 min, adsorbent dosage 0.05 g, and 4-chlorophenol concentration 50 ppm are identified. Among the nanocomposites tested, NZC 20:10:70, with 20% Ni and 10% Zn, achieves enhanced performance, removing 99.1% of 4-chlorophenol within 2 h. Adsorption kinetics follow the pseudo-second-order model and equilibrium data fit the Freundlich isotherm. Thermodynamic analysis indicates an exothermic and spontaneous process. The adsorption capacity of NZC 20:10:70 shows significant enhancement, growing from 19.85 mg/g at 10 ppm to 96.33 mg/g at 50 ppm initial concentration. Physical characterization confirms NZC 20:10:70's superior properties, including a high surface area of 118.471 m2/g. Evaluating economic viability, NZC 20:10:70 demonstrates robust reusability, retaining 85% efficiency over eight regeneration cycles. These results highlight NZC 20:10:70 as a promising adsorbent for effective and sustainable chlorophenol removal in water treatment.
Subject(s)
Chlorophenols , Nanocomposites , Water Pollutants, Chemical , Zinc , Chlorophenols/chemistry , Nanocomposites/chemistry , Adsorption , Water Pollutants, Chemical/chemistry , Zinc/chemistry , Nickel/chemistry , Kinetics , Cerium/chemistry , Water Purification/methodsABSTRACT
The design of bioelectrochemical system based on the principle of niche construction, offers a prospective pathway for achieving efficient and thorough biodechlorination in groundwater. This study designed a single-chamber microbial electrolysis cell, with porous three-dimensional (3D) electrodes introduced, to accelerate the niche construction process of functional communities. This approach allowed the growth of various bacteria capable of simultaneously degrading 2,4-dichlorophenol (DCP) and its refractory intermediates, 4-chlorophenol (4CP). The 3D-electrodes provided abundant attachment sites for diverse microbes with a high initial Shannon index (3.4), and along the degradation progress, functional bacteria (Hydrogenoanaerobacterium and Rhodococcus erythropolis for DCP-degrading, Sphingobacterium hotanense for 4CP-degrading and Delftia tsuruhatensis for phenol-degrading) constructed their niches. Applying an external voltage (0.6 V) further increased the selective pressure and niche construction pace, as well as provided 'micro-oxidation' site on the electrode surface, thereby achieving the degradation of 4CP and mineralization of phenol. The porous electrodes could also adsorb contaminants and narrow their interaction distance with microbes, which benefited the degradation efficiency. Thus a 10-fold increase in the overall mineralization of DCP was achieved. This study constructed a novel bioelectrochemical system for achieving efficient and thorough biodechlorination, which was suitable for in situ bioremediation of groundwater.
Subject(s)
Biodegradation, Environmental , Electrodes , Chlorophenols/metabolism , Bacteria/metabolism , Groundwater/chemistry , Water Pollutants, Chemical/metabolism , Water Purification/methodsABSTRACT
Ammonia monooxygenase (AMO)-mediated cometabolism of organic pollutants has been widely observed in biological nitrogen removal process. However, its molecular mechanism remains unclear, hindering its practical application. Furthermore, conventional nitrification systems encounter significant challenges such as air pollution and the loss of ammonia-oxidizing bacteria, when dealing with wastewater containing volatile organic pollutants. This study developed a nitrifying membrane-aerated biofilm reactor (MABR) to enhance the biodegradation of volatile 4-chlorophenol (4-CP). Results showed that 4-CP was primarily removed via Nitrosomonas nitrosa-mediated cometabolism in the presence of NH4+-N, supported by the increased nicotinamide adenine dinucleotide (NADH) and adenosine triphosphate (ATP) content, AMO activity and the related genes abundance. Hydroquinone, detected for the first time and produced via oxidative dechlorination, as well as 4-chlorocatechol was primary transformation products of 4-CP. Nitrosomonas nitrosa AMO structural model was constructed for the first time using homology modeling. Molecular dynamics simulation suggested that the ortho-carbon in the benzene ring of 4-CP was more prone to metabolismcompared to the ipso-carbon. Density functional theory calculation revealed that 4-CP was metabolized by AMO via H-abstraction-OH-rebound reaction, with a significantly higher rebound barrier at the ipso-carbon (16.37 kcal·mol-1) as compared to the ortho-carbon (6.7 kcal·mol-1). This study fills the knowledge gap on the molecular mechanism of AMO-mediated cometabolism of organic pollutants, providing practical and theoretical foundations for improving volatile organic pollutants removal through nitrifying MABR.
Subject(s)
Biofilms , Biotransformation , Chlorophenols , Molecular Dynamics Simulation , Nitrification , Chlorophenols/metabolism , Oxidoreductases/metabolism , Biodegradation, EnvironmentalABSTRACT
Ball-milled plastic char supported nano zero-valent iron (nZVI@BMPC) and their application combined with anaerobic sludge for microbial dechlorination of 2,4,6-trichlorophenol (2,4,6-TCP) were investigated. The XRD and FTIR analysis proved composition of zero valent states of iron, and the BET and SEM analysis showed that nZVI was uniformly distributed on the surface of BMPC. Successive addition of 1000 mg/L sodium lactate and nZVI@BMPC enhanced the acclamation of anaerobic sludge and resulted in the degradation of 4-CP within 80 days. The acclimated consortium with nZVI@BMPC completely degraded 2,4,6-TCP into CH4 and CO2, and the key dechlorination route was through 4-CP dechlorinaion and mineralization. The degradation rate of 2,4,6-TCP with nZVI@BMPC was 0.22/d, greater than that without nZVI@BMPC. The dechlorination efficiency was enhanced in the Fe2+/Fe3+ system controlled by nZVI@BMPC and iron-reducing bacteria. Metagenomic analysis result showed that the dominant de-chlorinators were Chloroflexi sp., Desulfovibrio, and Pseudomonas, which could directly degrade 2,4,6-TCP to 4-CP, especially, Chloroflexi bacterium could concurrently be used to mineralize 4-CP. The relative abundance of the functional genes cprA, acoA, acoB, and tfdB increased significantly in the presence of the nZVI@BMPC. This study provides a new strategy can be a good alternative for possible application in groundwater remediation.
Subject(s)
Biodegradation, Environmental , Chlorophenols , Iron , Sewage , Chlorophenols/chemistry , Chlorophenols/metabolism , Sewage/microbiology , Iron/chemistry , Anaerobiosis , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/metabolism , Bacteria/metabolism , Metal Nanoparticles/chemistryABSTRACT
This current study explored the effect of pyrite on the treatment of chlorophenolic compounds (CP) by Fenton process with micron-sized zero-valent iron (ZVI) as the catalyst. The experiments were conducted in batch reactors with 100 mg L-1 CP, 0-0.02 M H2O2, and variable pyrite and ZVI doses (0-1 g L-1). Our findings show that while the reactor with 1 g L-1 ZVI as the only catalyst achieved only 10% CP removal efficiency due to rapid ZVI surface passivation and ZVI particle aggregation, the CP removal efficiency increased with increasing pyrite dose and reached 100% within couple of minutes in reactors with 0.8 g L-1 pyrite and 0.2 g L-1 ZVI. The CP removal was mainly driven by the oxidative treatment of CPs with some strong radicals such as hydroxyl radicals (â¢OH) while the adsorption onto the catalyst surface was only responsible for 10 to 25% of CP removals, depending on the type of CP studied. The positive impact of pyrite on CP removal by the ZVI/H2O2 system could be attributed to the ability of pyrite to (1) create an acidic environment for optimum Fenton process, (2) provide support material for ZVI to minimize ZVI particle agglomeration, and (3) stimulate iron redox cycling for improved surface site generation. Following oxidative Fenton treatment, the degradation intermediate products of CPs, including some aromatic compounds (benzoquinone, hydroquinone, etc.) and organic acids (e.g., acetic acid), became more biodegradable in comparison to their mother compounds. Overall, the treatment systems with a mixture of ZVI and pyrite as catalyst materials could offer a suitable cost-effective technology for the treatment of wastewater containing biologically non- or low-degradable toxic compounds such as chlorophenols.
Subject(s)
Chlorophenols , Hydrogen Peroxide , Iron , Iron/chemistry , Hydrogen Peroxide/chemistry , Chlorophenols/chemistry , Hydrogen-Ion Concentration , Sulfides/chemistry , Catalysis , Biodegradation, Environmental , Water Pollutants, Chemical/chemistry , Oxidation-ReductionABSTRACT
Pesticide micropollutants like 4-chlorophenol (4CP) and E. coli bacteria represent a substantial hazard, impacting both the environment and human health. This study delves into the effectiveness of Ag-doped TiO2 (Ag@TiO2) in removing both 4CP and E. coli. Ag@TiO2 has demonstrated remarkable effectiveness in removing 4CP under both solar and visible light conditions, earning degradation efficiencies of 91.3% and 72.8%, respectively. Additionally, it demonstrates outstanding photodegradation efficiency for 4CP (98.8%) at an initial concentration of 1 mg L-1. Moreover, Ag@TiO2 exhibited substantially higher removal performance for 4CP (81.6%) compared to TiO2 (27.6%) in wastewater. Analysis of the radicals present during the photodegradation process revealed that ·O2- primarily drives the decomposition of 4CP, with h+ and ·OH also playing significant roles in the oxidation reactions of the pollutant. Interestingly, even under dark conditions, Ag@TiO2 exhibited the capability to eliminate approximately 20% of E. coli, a percentage that increased to over 96% under solar light. In addition, the prospects for environmental and health impacts of utilizing Ag@TiO2 for pesticide micropollutant removal and bacteria were discussed.
Subject(s)
Chlorophenols , Escherichia coli , Pesticides , Silver , Sunlight , Titanium , Water Pollutants, Chemical , Titanium/chemistry , Pesticides/chemistry , Silver/chemistry , Chlorophenols/chemistry , Water Pollutants, Chemical/chemistry , Photolysis , Wastewater/chemistryABSTRACT
CONTEXT: Dioxins, specifically 2,3,7,8-tetrachlorinated dibenzo-p-dioxin (TCDD), are highly toxic dioxins known for their severe health impacts and persistent environmental pollutants. This study focuses on understanding the formation pathways of TCDD from its precursor molecule 2,4,5-trichlorophenol (2,4,5-TCP). In our exploration of reaction pathways from 2,4,5-trichlorophenol (TCP), we delve into three reaction mechanisms: free-radical, direct condensation, and anionic. Our findings highlight the significance of the radical mechanism, particularly propagated by H radicals, with a notable increase in dioxin formation around 900 K. These results are consistent with experimental observations indicating an increase in the conversion of trichlorophenol from 600 to 900 K in the non-catalytic gas phase reaction. Thermodynamic parameters (∆H, ∆S, and ∆G), reaction barriers, and rate constants (k) were calculated across a temperature range of 300-1200 K to support the findings and provide insights into the optimal temperature range for controlling dioxins during the incineration process. METHOD: In this study, quantum chemical calculations were conducted using density functional theory (DFT) with the B3LYP functional and the 6-311 + + G(d,p) basis set in Gaussian 16 software. Stationary points, including transition states (TS), were confirmed with frequency calculations. Intrinsic reaction coordinate (IRC) calculations ensured minimum energy paths between TS and products, visualized in GaussView 6.0 Program. Single-point energy calculations utilized a more precise basis set, 6-311 + + G(3df,2p), for enhanced energy accuracy, incorporating zero-point vibrational energy (ZPE) and other energy corrections. These calculations were repeated over a temperature range of 298.15-1200 K at 1 atm pressure. Finally, rate constant (k) expressions associated with TCDD formation were determined using transition state theory (TST).
ABSTRACT
Organochlorides and particularly chlorophenols are environmental pollutants that deserve special attention. Enzymatic membrane bioreactors may be alternatives for efficiently removing such hazardous organochlorides from aqueous solutions. We propose here a novel enzymatic membrane bioreactor comprising an ultrafiltration membrane GR81PP, electrospun fibers made of cellulose acetate, and laccase immobilized using an incubation and a fouling approach. Configurations of this biosystem exhibiting the highest catalytic activity were selected for removal of 2-chlorophenol and 4-chlorophenol from aqueous solution in an enzymatic membrane bioreactor under various process conditions. The highest removal of chlorophenols, at 88% and 74% for 2-chlorophenol and 4-chlorophenol, respectively, occurred at pH 5 and 30 °C in the GR81PP/cellulose acetate/laccase biosystem with enzyme immobilized by the fouling method. Furthermore, the GR81PP/cellulose acetate/laccase biosystem with enzyme immobilized by the fouling method exhibited significant reusability and storage stability compared with the biosystem with laccase immobilized by the incubation method. The mechanism of enzyme immobilization is based on pore blocking and cake-layer formation, while the mechanism of chlorophenols removal was identified as a synergistic combination of membrane separation and enzymatic conversion. The importance of the conducted research is due to efficient removal of hazardous organochlorides using a novel enzymatic membrane bioreactor. The study demonstrates the biosystem's high catalytic activity, reusability, and stability, offering a promising solution for environmental pollution control.
Subject(s)
Bioreactors , Chlorophenols , Laccase , Membranes, Artificial , Water Pollutants, Chemical , Chlorophenols/chemistry , Laccase/metabolism , Laccase/chemistry , Water Pollutants, Chemical/chemistry , Enzymes, Immobilized/chemistry , Cellulose/chemistry , Water Purification/methodsABSTRACT
Chemical oxidation processes are widely used for the remediation of organically contaminated soils, but their potential impact on variable-valence and toxic metals such as chromium (Cr) is often overlooked. In this study, we investigated the risk of Cr(â ¢) oxidation in soils during the remediation of 2-chlorophenol (2-CP) contaminated soils using four different processes: Potassium permanganate (KMnO4), Modified Fenton (Fe2+/H2O2), Alkali-activated persulfate (S2O82-/OH-), and Fe2+-activated persulfate (S2O82-/Fe2+). Our results indicated that the KMnO4, Fe2+/H2O2, and S2O82-/Fe2+ processes progressively oxidized Cr(III) to Cr(â ¥) during the 2-CP degradation. The KMnO4 process likely involved direct electron transfer, while the Fe2+/H2O2 and S2O82-/Fe2+ processes primarily relied on HO⢠and/or SO4â¢- for the Cr(III) oxidation. Notably, after 4 h of 2-CP degradation, the Cr(VI) content in the KMnO4 process surpassed China's 3.0 mg kg-1 risk screening threshold for Class I construction sites, and further exceeded the 5.7 mg kg-1 limit for Class II construction sites after 8 h. Conversely, the S2O82-/OH- process exhibited negligible oxidation of Cr(III), maintaining a low oxidation ratio of 0.13%, as highly alkaline conditions induced Cr(III) precipitation, reducing its exposure to free radicals. Cr(III) oxidation ratio was directly proportional to oxidant dosage, whereas the Fe2+/H2O2 process showed a different trend, influenced by the concentration of reductants. This study provides insights into the selection and optimization of chemical oxidation processes for soil remediation, emphasizing the imperative for thorough risk evaluation of Cr(III) oxidation before their application.
Subject(s)
Chlorophenols , Chromium , Environmental Restoration and Remediation , Oxidation-Reduction , Soil Pollutants , Soil , Chromium/chemistry , Soil Pollutants/chemistry , Chlorophenols/chemistry , Soil/chemistry , Hydrogen Peroxide/chemistry , Potassium Permanganate/chemistryABSTRACT
Rational reuse of municipal sludge to produce electro-Fenton electrode can not only save resources, but also produce superior peroxide and degradation pollutants simultaneously. Herein, a novel electro-Fenton electrode derived from sludge biochar loaded on Ni foam (SBC@Ni) was constructed via high temperature pyrolysis and chemical coating for efficient H2O2 evolution and pollutant degradation. Systematic experiments and density functional theory calculations (DFT calculation) explained that the production of graphite C and graphite N during high-temperature pyrolysis of municipal sludge can greatly enhance the oxygen reduction reaction of SBC@Ni electrode and promote the evolution of H2O2. And the hybrid heterojunctions, such as FeP, also played a key role in electrocatalytic processes. Notably, the electrode still exhibited excellent performance after 1000 linear scans and 12 h of continuous current stimulation, which demonstrated the excellent stability of the electrode. Moreover, SBC@Ni electrode can not only effectively oxidize 4-chlorophenol through the electro-Fenton effect, but also fully mineralize organic matter, indicating promising environmental application. The free radical quenching experiment also revealed that the ·OH is the main active species for 4-CP degradation in SBC@Ni electro-Fenton system.
Subject(s)
Charcoal , Electrodes , Graphite , Hydrogen Peroxide , Sewage , Hydrogen Peroxide/chemistry , Sewage/chemistry , Graphite/chemistry , Charcoal/chemistry , Density Functional Theory , Nitrogen/chemistry , Oxidation-Reduction , Chlorophenols/chemistryABSTRACT
The research on developing a purification technology for 2,4-dichlorophenol (2,4-DCP) polluted water with high efficiency and the low energy consumption is crucial for achieving several Sustainable Development Goals (SDGs). In order to achieve these goals, MWCNTs-Pd/Fe nanocomposites were prepared by Fe nanoparticles modified with multi-walled carbon nanotubes (MWCNTs) and palladium (Pd) in the presence of ultrasonic irradiation. The MWCNTs-Pd/Fe nanocomposites were characterized by using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and X-Ray Diffraction (XRD), and others. Characterization results confirmed that the MWCNTs-Pd/Fe was successfully prepared, with the particle size of 80 nm and the specific surface area of 89.5 m2/g confirmed. We studied the reductive dechlorination of 2,4-Dichlorophenol (2,4-DCP) by MWCNTs-Pd/Fe nanocomposites under different conditions, and the optimized experimental results were found when the Pd loading was 0.4 %, the pH was 3, and the temperature was 30 °C. The phenol yield increased from 76.5 % (without ultrasonic irradiation) to 92.3 % (with ultrasonic irradiation) in 300 min and the 2,4-DCP removal rate reached 98.7 % under the optimal conditions. Therefore, ultrasonic irradiation enhanced the performance of MWCNTs-Pd/Fe nanocomposites for 2,4-DCP removal. We also established the degradation mechanism of chlorophenol by analyzing the intermediates, and proposed the degradation kinetics model. The degradation of 2,4-DCP followed the pseudo-first-order kinetics with the rate constant of 0.05988 min-1. Also, this study demonstrated the potential of using ultrasonic irradiation to improve the properties and recovery of MWCNTs-Pd/Fe nanocomposites, contributing to achievement of the Sustainable Development Goals (SDGs), including SDG-3, SDG-6.
ABSTRACT
Halogenated aromatic compounds possess bidirectional effects on denitrifying bio-electron behavior, providing electrons and potentially interfering with electron consumption. This study selected the typical 4-chlorophenol (4-CP, 0-100 mg/L) to explore its impact mechanism on glucose-supported denitrification. When COD(glucose)/COD(4-CP)=28.70-3.59, glucose metabolism remained the dominant electron supply process, although its removal efficiency decreased to 73.84-49.66 %. When COD(glucose)/COD(4-CP)=2.39-1.43, 4-CP changed microbial carbon metabolism priority by inhibiting the abundance of glucose metabolizing enzymes, gradually replacing glucose as the dominant electron donor. Moreover, 5-100 mg/L 4-CP reduced adenosine triphosphate (ATP) by 15.52-24.67 % and increased reactive oxygen species (ROS) by 31.13-63.47 %, causing severe lipid peroxidation, thus inhibiting the utilization efficiency of glucose. Activated by glucose, 4-CP dechlorination had stronger electron consumption ability than NO2--N reduction (NO3--N > 4-CP > NO2--N), combined with the decreased nirS and nirK genes abundance, resulting in NO2--N accumulation. Compared with the blank group (0 mg/L 4-CP), 5-40 mg/L and 60-100 mg/L 4-CP reduced the secretion of cytochrome c and flavin adenine dinucleotides (FAD), respectively, further decreasing the electron transfer activity of denitrification system. Micropruina, a genus that participated in denitrification based on glucose, was gradually replaced by Candidatus_Microthrix, a genus that possessed 4-CP degradation and denitrification functions after introducing 60-100 mg/L 4-CP.
Subject(s)
Denitrification , Electrons , Glucose , Glucose/metabolism , Chlorophenols/metabolismABSTRACT
This study explores the utilization of semiconductor-based photocatalysts for environmental remediation through photocatalytic degradation, harnessing solar energy for effective treatment. The primary focus is on the application of photocatalytic technology for the degradation of 2-chlorophenol and methylene blue, critical pollutants requiring remediation. The research involves the synthesis of binary AgAlO2/g-C3N4 nanocomposites through an exchange ion method, subsequent calcination, and sonication. This process enhances the transfer of photogenerated electrons from AgAlO2 to g-C3N4, resulting in a significantly increased reductive electron charge on the surface of g-C3N4. The photocatalytic activity of the synthesized composites is comprehensively examined in the degradation of 2-chlorophenol and methylene blue through detailed crystallographic, electron-microscopy, photoemission spectroscopy, electrochemical, and spectroscopic characterizations. Among the various composites, AgAlO2/20% g-C3N4 emerges as the most active photocatalyst, achieving an impressive 98% degradation of methylene blue and 97% degradation of 2-chlorophenol under visible light. Notably, AgAlO2/20% g-C3N4 surpasses bare AgAlO2 and bare g-C3N4, exhibiting 1.66 times greater methylene blue degradation and constant rate (k) values of 20.17 × 10-3 min-1, 4.18 × 10-3 min-1 and 3.48 × 10-3 min-1, respectively. The heightened photocatalytic activity is attributed to the diminished recombination rate of electron-hole pairs. Scavenging evaluations confirm that O2â¢- and h+ are the primary photoactive species steering methylene blue photodegradation over AgAlO2/g-C3N4 in the visible region. These findings present new possibilities for the development of efficient binary photocatalysts for environmental remediation.
Subject(s)
Chlorophenols , Environmental Pollutants , Environmental Restoration and Remediation , Light , Methylene Blue , Environmental Restoration and Remediation/methods , Chlorophenols/chemistry , Catalysis , Environmental Pollutants/chemistry , Methylene Blue/chemistry , Nanocomposites/chemistry , PhotolysisABSTRACT
The present study compares the effect of using different solvents on the electrochemical properties of the reduced TiO2 nanotubes (TiO2-rNTs) layered Ti/TiO2-rNTs/SnO2-Sb/PbO2 anodes. The electrodes are prepared using three different solvent-based precursors: (i) isopropanol, (ii) ethylene glycol and citric acid (Pechini method), and (iii) 2-hydroxyethylammonium acetate (2HEAA) ionic liquid (IL) via the thermal decomposition route. The decomposition mechanism of precursor solutions was explored using the thermogravimetric (TGA) analysis. Further, the physicochemical properties of the electrodes are examined using Field emission Scanning Electron microscopy (FE-SEM), X-ray diffraction spectroscopy (XRD), and X-ray photoelectron emission spectroscopy (XPS). The results revealed that solvents with higher viscosity and slower decomposition rates support better film uniformity and higher stability of the electrode. The TiO2 -rNTs bottom layer and PbO2 top layer helped obtain higher film stability, increased working potential window (2.2 V vs. SHE) of the electrode, and the repeatability of the results. The performance of different electrodes based on the precursor solution is found as IL â« Pechini > Isopropanol. 4-chlorophenol (4-CP) is used as a model pollutant to test the performance of IL-Ti/TiO2-rNTs/SnO2-Sb/PbO2 anode in an anodic oxidation (AO) coupled electro-Fenton (EF) treatment. Further, the reliability of the electrode is evaluated by mineralizing other persistent organic pollutants (POPs) like tetracyclin, phenol, 2-chlorophenol (2-CP), and 2,4-dichlorophenol (2,4-DCP). Under the optimized conditions, the proposed system was able to mineralize the tetracyclin, phenol, 2-CP, 2,4-DCP, and 4-CP up to 78.91, 82.07, 74.96, 78.78, and 69.3 %, respectively. Moreover, the degradation mechanism of chlorophenols is proposed.
Subject(s)
Oxides , Water Pollutants, Chemical , Oxides/chemistry , Persistent Organic Pollutants , 2-Propanol , Reproducibility of Results , Titanium/chemistry , Oxidation-Reduction , Phenols , Phenol/chemistry , Electrodes , Solvents , Water Pollutants, Chemical/chemistryABSTRACT
Development of efficient and intelligent method for detecting harmful agrochemicals in resource-limited settings remains an urgent need to ensure food and environmental safety. Herein, a novel dual-emitting Tb3+-modified hydrogen-bonded organic framework (Tb@TBTC, TBTC is the ligand of HOF-TBTC.) with visible green fluorescence has been prepared through coordination post-synthetic modification. Tb@TBTC can be designed as a fluorescence sensor for the identification of two harmful carcinogenic pesticides, thiabendazole (TBZ) and 2-chlorophenol (2-CP) with high sensitivity, high efficiency and excellent selectivity. Tb@TBTC can also adsorb 2-CP with high adsorption rate. In realistic fruit juice and river water samples, the detection limits of Tb@TBTC toward TBZ and 2-CP are as low as 2.73 µM and 2.18 µM, respectively, demonstrating the feasibility in practical application. Furthermore, an intelligent real-time and on-site monitoring platform for 2-CP detection is constructed based on Tb@TBTC-agarose hydrogel films with the assistance of back propagation neural network, which can efficiently and accurately determine the concentration of 2-CP from fluorescence images through human-machine interaction. This work presents a facile pathway to prepare Tb@HOF fluorescent sensor for food and ecological environment safety, which is highly promising for preventing human disease and improving global public health.
Subject(s)
Chlorophenols , Food , Thiabendazole , Humans , Thiabendazole/analysis , Fruit and Vegetable JuicesABSTRACT
This study introduces the UV/glucose-oxidase@Kaolin (GOD@Kaolin) coupled organic green rust (OGR) system (UV/OGR/GOD@Kaolin) to investigate the promotion of glucose oxidase activity by UV light and its synergistic degradation mechanism for photosensitive pollutants, specifically targeting the efficient degradation of 4-chlorophenol (4-CP). The enzyme system demonstrates its ability to overcome drawbacks associated with traditional Fenton systems, including a narrow pH range and high localized concentration of H2O2, by gradually releasing hydrogen peroxide in situ within a neutral environment. In the presence of UV radiation under specific conditions, enhanced enzyme activity is observed, resulting in increased efficiency in pollutant removal. The gradual release of hydrogen peroxide plays a crucial role in preventing unwanted reactions among active substances. These unique features facilitate the generation of highly reactive species, such as Fe(IV)O, â¢OH, and â¢O2-, tailored to efficiently target the organic components of interest. Additionally, the system establishes a positive iron cycle, ensuring a sustained reactive capability throughout the degradation process. The results highlight the UV/OGR/GOD@Kaolin system as an effective and environmentally friendly approach for the degradation of 4-CP, and the resilience of the enzyme extends the system's applicability to a broader range of scenarios.
Subject(s)
Environmental Pollutants , Water Pollutants, Chemical , Ultraviolet Rays , Hydrogen Peroxide/chemistry , Glucose Oxidase/metabolism , Kaolin , Glucose , Oxidation-Reduction , Water Pollutants, Chemical/chemistryABSTRACT
Chlorophenols are persistent environmental pollutants used in synthesizing dyes, drugs, pesticides, and other industrial products. The chlorophenols released from these processes seriously threaten the environment and human health. The present study describes 4-chlorophenol (4-CP) degradation activity and metagenome structure of a bacterial consortium enriched in a 4-CP-containing medium. The consortium utilized 4-CP as a single carbon source at a wide pH range, temperature, and in the presence of heavy metals. The immobilized consortium retained its degradation capacity for an extended period. The 4-aminoantipyrine colorimetric analysis revealed complete mineralization of 4-CP up to 200 mg/L concentration and followed the zero-order kinetics. The addition of glycerol and yeast extract enhanced the degradation efficiency. The consortium showed both ortho- and meta-cleavage activity of catechol dioxygenase. Whole genome sequence (WGS) analysis revealed the microbial compositions and functional genes related to xenobiotic degradation pathways. The identified genes were mapped on the KEGG database to construct the 4-CP degradation pathway. The results exhibited the high potential of the consortium for bioremediation of 4-CP contaminated sites. To our knowledge, this is the first report on WGS analysis of a 4-CP degrading bacterial consortium.
Subject(s)
Chlorophenols , Metagenome , Humans , Metals , CarbonABSTRACT
Peroxidase-like based on double transition metals have higher catalytic activity and are considered to have great potential for application in the field of pollutant degradation. First, in this paper, a novel Fe0-doped three-dimensional porous Fe0@FeMn-NC-like peroxidase was synthesized by a simple one-step thermal reduction method. The doping of manganese was able to reduce part of the iron in Fe-Mn binary oxides to Fe0 at high temperatures. In addition, Fe0@FeMn-NC has excellent peroxidase-like mimetic activity, and thus, it was used for the rapid degradation of p-chlorophenol (4-CP). During the degradation process, Fe0 was able to rapidly replenish the constantly depleted Fe2+ in the reaction system and brought in a large number of additional electrons. The ineffective decomposition of H2O2 due to the use of H2O2 as an electron donor in the reduction reactions from Fe3+ to Fe2+ and from Mn3+ to Mn2+ was avoided. Finally, based on the experimental results of LC-MS and combined with theoretical calculations, the degradation process of 4-CP was rationally analyzed, in which the intermediates were mainly p-chloro-catechol, p-chloro resorcinol, and p-benzoquinone. Fe0@FeMn-NC nano-enzymes have excellent catalytic activity as well as structural stability and perform well in the treatment of simulated wastewater containing a variety of phenolic pollutants as well as real chemical wastewater. It provides some insights and methods for the application of peroxidase-like enzymes in the degradation of organic pollutants.
Subject(s)
Environmental Pollutants , Water Pollutants, Chemical , Iron/chemistry , Hydrogen Peroxide/chemistry , Peroxidase , Wastewater , Water Pollutants, Chemical/chemistryABSTRACT
Chlorophenols are widespread environmental organic pollutants with harmful effects on human beings. Although relationships between chlorophenols and various dysfunctions/diseases have been reported, the contribution of chlorophenols exposure to mortalities is underdetermined. In this cohort study, we included 4 types of urinary chlorophenols, aiming to estimate associations of chlorophenols exposure with all-cause and cause-specific mortalities. Urinary chlorophenols were examined at baseline of National Health and Nutrition Examination Survey (NHANES) 2003-2010, and adjusted for the urinary creatinine level. Associations between chlorophenols and mortalities were estimated using COX regression analyses, results were shown as hazard ratio (HR) and 95% confidence interval (95% CI). By dividing participants into four subgroups based on quartiles of urinary levels of chlorophenols, associations between mortalities and categorical variables of chlorophenols were estimated. Furthermore, the quantile g-computation analysis was used to estimate the joint effects of 4 chlorophenols on mortalities. Among 5817 adults (2863 men), 1034 were deceased during the follow-up. After adjusted for confounders, 2,4,5-trichlorophenol (2,4,5-TCP) was found to be positively associated with both all-cause (HR = 1.46; 95% CI: 1.16, 1.84) and cardiovascular disease (CVD) mortalities (HR = 1.60; 95% CI: 1.00, 2.55). Compared to the subgroup of the lowest level of chlorophenols, participants in subgroups of higher 2,4,5-TCP levels showed higher risk of all-cause mortality (P-value for trend = 0.003). For CVD mortality, HRs in subgroups of higher levels of 2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP) were statistically significant (P-values for trend were 0.017 for 2,4-DCP and 0.049 for 2,4,6-TCP). The HRs (95% CI) of joint effects of 4 chlorophenols were 1.11 (1.01, 1.21) and 1.32 (1.10, 1.57) for all-cause and CVD-specific mortalities, and 2,4,5-TCP showed the highest weight in joint effects. All of these findings implied that among 4 urinary chlorophenols we included, 2,4,5-TCP might be a sensitive one in associations with mortalities among general populations.
Subject(s)
Cardiovascular Diseases , Chlorophenols , Environmental Pollutants , Adult , Male , Humans , United States , Nutrition Surveys , Cohort Studies , Cardiovascular Diseases/urineABSTRACT
This article presents a novel proof of concept for the blood plasma quantification of clinically relevant concentrations of direct oral anticoagulants, DOACs, including rivaroxaban and edoxaban, as well as low-molecular-weight heparins, LMWHs, such as enoxaparin and dalteparin, utilising a calibration-free disposable electrochemical sensor with co-facing electrodes. A dose-response curve was generated for rivaroxaban and edoxaban to demonstrate the sensor's ability to detect ≥9.00 ng mL-1 rivaroxaban and quantify it in the 11.0-140 ng mL-1 range. Similarly, the lower detection limit for edoxaban was 12.9 ng mL-1, with a quantification range of 16.8-140 ng mL-1. The significance of this sensor lies in its ability to quantify rivaroxaban and edoxaban below 30 ng mL-1, which is crucial in emergency care centres when patients undergoing DOAC therapy require emergency surgery or reversal of DOACs due to bleeding or ischemic stroke. Furthermore, the sensor can detect ≥0.016 IU mL-1 enoxaparin and ≥0.013 IU mL-1 dalteparin and quantify them in the 0.025-0.75 and 0.019-0.75 IU mL-1 range, respectively. Additionally, a dose-response curve was presented to demonstrate the potential ability of this sensor to quantify factor-Xa inhibitors independently of which DOACs or LMWHs are used. With the assay completed in less than 30 s using a minimal volume of 7 µL sample, the possibility to work at physiological pH and under calibration-free format makes this assay an excellent candidate for point-of-care testing.