Development of a green microextraction procedure for determining polyaromatic hydrocarbons in electronic equipment plastics.

The global proliferation of electronic devices, driven by technological advancements, has led to the release of organic pollutants from the plastic components of these devices, particularly in indoor environments. Among these pollutants, polycyclic aromatic hydrocarbons (PAHs), which are emitted into the air from plastic components, play a critical role in the field of indoor environment pollution. Consequently, effectively monitoring the PAH content in plastics used in electronic equipment is crucial for preventing indoor contamination. In this study we aimed to develop a fast, inexpensive, easy, and environmentally friendly analysis method for determining PAH content in plastic equipment. A dispersive liquid liquid microextraction (DLLME) combined with solidified organic drop (SFO) microextraction technique was developed. Considering the eleven number of parameters that can affect the signal in the DLLME-SFO method, Plackett Burmann's design was applied to select the most three impactful parameters for 18 PAH species. A Box-Behnken experimental design was also applied to optimize the identified parameters. The optimal conditions for the most influential parameters such as solvent type, pH, and the sample weight were identified as 1-dodecanol, 12 and 0.24 g, respectively. The proposed method was validated under these optimized conditions, yielding low detection limits ranging from 0.004 to 0.11 ng mL-1. The calibration curves were linear with correlation coefficients above 0.98 and relative standard deviation (RSD) values ranging from 2.4% to 20%. This method was successfully applied to analyze PAH content in the plastic components of electronic devices. The extraction technique developed in this study is a newly developed technique and has not been previously used to analyze organic pollutants that may be present in electronic equipment plastic.

Personalization of pharmacotherapy with sirolimus based on volumetric absorptive microsampling (VAMS) in pediatric renal transplant recipients-from LC-MS/MS method validation to clinical application.

BACKGROUND: The benefits of pharmacotherapy with sirolimus (SIR) in pediatric transplant recipients are well established. Traditionally, whole blood samples have been used to measure SIR concentrations. Volumetric Absorptive Microsampling (VAMS) is an alternative sampling strategy suitable for Therapeutic Drug Monitoring (TDM). In this study, we developed and validated two liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods for determining SIR concentrations in whole blood (WB) and capillary whole blood samples collected using a VAMS-Mitra™ device. METHODS: We used protein precipitation during WB sample preparation and dispersive liquid-liquid microextraction (DLLME) with methyl tert-butyl ether for VAMS sample preparation to optimise the analyte extraction process. The described validation protocols were cross-validated, confirming the equivalence of the whole-blood and VAMS-based methods. Furthermore, the developed methods were evaluated in two three-level rounds of an external proficiency-testing scheme. RESULTS: The analytical methods were successfully validated within the calibration range of SIR (0.5-60 ng/ml). The validation parameters met the European Medicines Agency (EMA) and the International Association of Therapeutic Drug Monitoring and Clinical Toxicology (IATDM&CT) acceptance criteria. No hematocrit (tested in the range of 24.3-64.1%), matrix, or carry-over effects were observed. Cross-validation confirmed the interchangeability between VAMS-LC-MS/MS and WB-LC-MS/MS methods. The developed methods were successfully implemented for SIR determination in 140 clinical samples (70 each of WB and VAMS) from pediatric renal transplant recipients, demonstrating their practicality and reliability. CONCLUSION: The VAMS-based method has been rigorously tested and is clinically equivalent to the reference WB-LC-MS/MS method. Additionally, clinical validation confirmed the utility of the presented methods for TDM of the SIR in the pediatric population after renal transplantation.

Natural deep eutectic solvent-based dispersive liquid-liquid microextraction of pesticides in drinking waters combined with GC-MS/MS detection.

The current research aims to develop a new analytical method applying a dispersive liquid-liquid microextraction (DLLME) assisted by vortex and using an environmentally friendly extractant for the preconcentration of organochlorine and organophosphorus pesticides followed by gas chromatography-tandem mass spectrometry (GC-MS/MS) analysis. The extractant (i.e., natural deep eutectic solvent (NADES)) is safe, cheap, biodegradable and can be prepared by simply mixing DL-menthol and decanoic acid (molar ratio 2:1). The main experimental factors affecting the extraction of all analytes evaluated (19 organochlorine and organophosphorus pesticides) have been optimised using a multivariate analysis consisting in two steps: a Plackett-Burman design followed by a central composite design (CCD). Seven experimental factors have been evaluated: (i) sample volume; (ii) NADES volume; (iii) sample pH; (iv) extraction time; (v) centrifugation time; (vi) centrifugation speed; and (vii) ionic strength (NaCl %, w v-1). For the significant variables, the optimum values were 10 mL sample and 45 µL NADES. No pH adjustment as well as addition of NaCl were needed. The other variables were set at 3 min extraction time, 5 min centrifugation time and 900×g centrifugation speed, respectively. Under the optimised extraction conditions, the limit of quantification (LOQ) values ranged between 0.2 and 78 ng L-1 for all analysed pesticides. Furthermore, the proposed analytical method has been successfully applied to drinking water (bottled spring water). The recovery study (n = 3) has been evaluated at 0.1, 1.0 and 5.0 µg L-1 spiking levels, obtaining relative recovery values within the range of 70 % and 117 % and RSD values between 1 % and 20 % for all the analytes studied, except for p,p-DDT (56-77 % in high conductivity water samples).

Solvent-Focused Gas Chromatographic Determination of Thymol and Carvacrol Using Ultrasound-Assisted Dispersive Liquid-Liquid Microextraction through Solidifying Floating Organic Droplets (USA-DLLME-SFO).

An ultrasound-assisted dispersive liquid-liquid microextraction by solidifying floating organic droplets, coupled to a form of temperature-programmed gas chromatography flame ionization detection, has been developed for the extraction and determination of thymol and carvacrol. This method utilizes undecanol as the extraction solvent, offering advantages such as facilitating phase transfer through solidification and enhancing solvent-focusing efficiency. The optimal gas chromatography conditions include a sample injection volume of 0.2 µL, a split ratio of 1:10, and a flow rate of 0.7 mL min-1. The extraction conditions entail an extraction solvent volume of 20 µL, a disperser solvent (acetone) volume of 500 µL, pH 7.0, 7.0% NaCl (3.5 M), a sample volume of 5.0 mL, an ultrasound duration of 10 min, and a centrifuge time of 7.5 min (800 rpm). These conditions enable the achievement of a high and reasonable linear range of 3.5 to 70. 0 µg mL-1 for both thymol and carvacrol. The detection limits are found to be 0.95 and 0.89 µg mL-1, respectively, for thymol and carvacrol. The obtained relative standard deviations, 2.7% for thymol and 2.6% for carvacrol, demonstrate acceptable precision for the purpose of quantitative analysis.

A Novel DLLME Method Involving a Solidifying Hydrophobic Deep Eutectic Solvent Using Hydrophilic Deep Eutectic Solvent as the Dispersant for the Determination of Polychlorinated Biphenyls in Water Samples.

This paper presents a novel dispersive liquid-liquid microextraction (DLLME) method that employs solidified hydrophobic deep eutectic solvent (DES) with hydrophilic DES acting as the dispersant. The aim is to enrich polychlorinated biphenyls (PCBs) from water samples for subsequent determination by gas chromatography-mass spectrometry. The effects of both the hydrophobic DES as the extractant and the hydrophilic DES as the dispersant were thoroughly investigated. Optimization of the key factors influencing extraction efficiency was performed, and the method was subsequently validated. Specifically, a hydrophobic DES called DES2, prepared by combining thymol and decanoic acid in a molar ratio of 3:2, was selected as the extraction solvent. Meanwhile, a hydrophilic DES named DES6, prepared from choline chloride and acetic acid in a molar ratio of 1:2, was chosen as a dispersant. Under the optimal extraction conditions, the developed method exhibited excellent linearity over the concentration range of 0.01-5.0 µg/L, low limits of detection ranging from 3.0 to 5.1 ng/L, relative standard deviations less than 4.1%, and enrichment factors between 182 and 204 for PCBs. Finally, the effectiveness of the developed method was successfully demonstrated through residue determination of PCBs in water samples.

A closer look at how the dispersive liquid-liquid microextraction method works. Investigation of the effect of solvent mixture composition on the quality and stability of the cloudy state.

The dispersive liquid-liquid microextraction (DLLME) is one of the most popular miniaturized extraction procedures. In this paper, the degree of dispersion and dispersion stability were studied with the aim to assess the correlations of these parameters with efficiency for the selected analytical application. The dependence between the degree of dispersion (cloudy state quality) and its stability obtained by various emulsification procedures, such as solvent-assisted emulsification (using various dispersive solvents) and mechanical emulsification (using auxiliary energies), is investigated and discussed. It was found out that the degree of dispersion depends on the type of emulsification procedure and decreases in the series: solvent-assisted (SA-) = ultrasound-assisted (UA-) > air-assisted (AA-) > vortex-assisted (VA-) emulsification. The emulsion stability depends on the degree of dispersion and there were 1810 and 2070 s for the most effective emulsification procedures, such us solvent-assisted and ultrasound-assisted emulsification, respectively. A comparison between the sensitivity of the analytical methods (using spectrophotometric determination of the anionic surfactants) and the degree of dispersion have been made. The sensitivity of the methods was ranked as follows: DLLME > UA-LLME > VA-LLME > AA-LLME.

A sustainable and innovative method to determine parabens in body creams for exposure and risk assessment.

Methylparaben (MeP), ethylparaben (EtP), propylparaben (PrP), and butylparaben (BuP) are among the most widely used preservatives in cosmetics, drugs, and foods. These compounds have been associated with toxic effects due to the overuse of products with parabens in their formulation. The toxicity of parabens may be correlated to endocrine disruption, owing to their ability to mimic the actions of estradiol. In this paper, a simple, sustainable, robust, and innovative dispersive liquid-liquid microextraction (DLLME) technique was developed and employed to extract these xenobiotics from body cream samples, aiming to calculate the margin of safety (MoS) to assess the risk of exposure. The validated method presented suitable linearity (r > 0.99), lower limits of detection (ranging from 0.01 to 0.04 % w/w), and satisfactory precision and accuracy (ranging from 4.33 to 10.47, and from -14.25 to 13.85, respectively). Seven of the ten analysed samples presented paraben contents within the acceptable concentration according to European legislation. The MoS value obtained for PrP (37.58) suggested its reduced safety, indicating that PrP may significantly contribute to systemic exposure resulting from the use of personal care products.

Fast DLLME-GC-MS Method for Determination of Pesticides in Carmelite Drops and Evaluation of Matrix Effects in Related Medicinal Products.

The production of nutraceuticals is a growing trend, as many consumers consider them an important part of the modern active lifestyle. Others rely on the use of nutraceuticals instead of prescribing pharmaceuticals to improve their health more naturally. One of the major concerns in the nutraceutical industry is the potential presence of contaminants. Even low concentrations of contaminant residues can be harmful, so analytical methods that are sensitive at ultratrace levels are needed. Dispersive liquid-liquid microextraction method combined with fast gas chromatography and mass spectrometry was developed for the inspection of pesticide residues in Carmelite drops. The most suitable recoveries are presented when the alcohol content is fixed at 20% in Carmelite drops. The method was validated; the linearity, limits of detection/quantification, the method accuracy and precision were obtained. The complex nutraceutical matrix causes significant complications in quantitative analysis; therefore, the main target of the work was placed on studying the effects of the matrix on the correct expression of the resulting concentration of contaminants in different types of samples. An in-depth study of matrix factors was carried out, and its relationship with the content of potential interferents from the medicinal products as well as other components added during the drops' production was discussed. Related medicinal plant-derived nutraceuticals were tested, the method was applied for real-life samples, and positive findings are herein reported.

Comparative study of sample preparation procedures to determine the main compounds in ayahuasca beverages by QuEChERS and high-performance liquid chromatography analysis.

INTRODUCTION: Ayahuasca is a psychoactive drink originally consumed by indigenous people of the Amazon. The lack of regulation of this drink leads to uncontrolled consumption, and it is often consumed in religious contexts. OBJECTIVE: The aim of this work is to compare three miniaturised extraction techniques for extracting the main ayahuasca compounds from beverages. METHODOLOGY: Three sample pretreatment techniques were evaluated (dispersive liquid-liquid microextraction [DLLME], microextraction by packed sorbent [MEPS] and QuEChERS [Quick, Easy, Cheap, Effective, Rugged and Safe]) for the simultaneous extraction of N,N-dimethyltryptamine (DMT), tetrahydroharmine (THH), harmine, harmaline, harmol and harmalol from ayahuasca beverage samples. Then, the most promising technique (QuEChERS) was chosen to pre-concentrate the analytes, subsequently detected by high-performance liquid chromatography coupled to a diode array detector (HPLC-DAD). RESULTS: The procedure was optimised, with the final conditions being 500 µL of extractor solvent, 85 mg of primary secondary amine (PSA) and 4 s of vortexing. The analytical method was validated, showing to be linear between 0.16 and 10 µg/mL for ß-carbolines and between 0.016 and 1 µg/mL for DMT, with coefficients of determination (R2) between 0.9968 and 0.9993. The limit of detection (LOD) and lower limit of quantification (LLOQ) were 0.16 µg/mL for all compounds, except for DMT (0.016 µg/mL) and extraction efficiencies varied between 60.2% and 88.0%. CONCLUSION: The analytical methodology proved to be accurate and precise, with good linearity, LODs and LLOQs. This method has been fully validated and successfully applied to ayahuasca beverage samples.

Analytical strategy to assess the microbial degradation of poly(butylene-adipate-co-terephthalate)/poly(lactic acid) films.

Plastic is widely used in agricultural applications, but its waste has an adverse environmental impact and a long-term detrimental effect. The development of biodegradable plastics for agricultural use is increasing to mitigate plastic waste. The most commonly used biodegradable plastic is poly(butylene adipate co-terephthalate)/poly(lactic acid) (PBAT/PLA) polymer. In this study, an analytical procedure based on dispersive liquid-liquid microextraction (DLLME) followed by gas chromatography-mass spectrometry (GC-MS) in combination with chemometrics has been optimized to assess the degradation level of PBAT/PLA films by monitoring their characteristic degradation products. Carboxylic acids (benzoic, phthalic, adipic, heptanoic, and octadecanoic acids) and 1,4-butanediol have been found to be potential markers of PBAT/PLA degradation. The DLLME-GC-MS analytical approach has been applied for the first time to assess the degradation efficiency of several microorganisms used as degradation accelerators of PBAT/PLA based on the assigned potential markers. This analytical strategy has shown higher sensitivity and precision than standard techniques, such as elemental analysis, allowing us to detect low degradation levels.

Profiling of Volatile Compounds in 'Muscat Hamburg' Contaminated with Aspergillus carbonarius before OTA Biosynthesis Based on HS-SPME-GC-MS and DLLME-GC-MS.

Aspergillus carbonarius is known to produce the carcinogenic ochratoxin A (OTA) in grapes. The metabolism process before OTA biosynthesis influences the content and composition of the volatile compounds in grapes. In this study, a self-established method based on QuEChERS coupled with high-performance liquid chromatography-fluorescence detection (HPLC-FLD) was used to determine the OTA levels during a seven-day contamination period. The results showed that OTA was detected on the second day after contamination with A. carbonarius. Thus, the first day was considered as the critical sampling timepoint for analyzing the volatiles in grapes before OTA biosynthesis. Additionally, the volatile compounds in grapes were analyzed using headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS) and dispersive liquid-liquid microextraction gas chromatography-mass spectrometry (DLLME-GC-MS). The corresponding data were evaluated via multivariate data analysis using projection methods, including PCA and OPLS-DA. The results indicated significant differences in the nine volatile compounds in grapes contaminated with A. carbonarius before OTA biosynthesis. The results of the Pearson correlation analysis showed positive correlations between ethyl acetate, styrene, 1-hexanol and OTA; (E)-2-hexenal and nerolic acid were negatively correlated with OTA. Overall, these findings provide a theoretical basis for the early prediction of OTA formation in grape and grape products using GC-MS technology.

Synthesis and characterization of a novel ionic liquid for preconcentration of Brilliant Blue FCF (E 133) from some foods by ultrasound assisted temperature controlled ionic liquid dispersive liquid liquid microextraction method prior to spectrophotometric analysis; A comparative study.

In this study, a novel ionic liquid (3-(3-chloro-2-hydroxypropyl)-1-butyl-1H-imidazol-3-ium hexafluorophosphate, (IL-2) was synthesized and characterized by FT-IR, NMR (1H,13C,31P) spectroscopy, and TGA. Two microextraction methods, ultrasonic assisted ionic liquid dispersive liquid liquid microextraction (USA-IL-DLLME) and ultrasonic assisted-temperature controlled ionic liquid DLLME, have been developed for preconcentration of Brilliant Blue FCF (E133) from some food products by the sythesized IL-2. For optimization of the both methods, several parameters such as volume of IL-2, pH, temperature, ultrasonication time, extraction time, centrifugation time, and salt effect were investigated. The obtained results for both methods under optimum conditions were compared. According to these results, the best limit of detection (4.55 µg L -1), enrichment factor (58), preconcentration factor (50), linear range (15-80 µg L -1), relative standard deviation % (1.15 %) were obtained by use of USA-TC-IL-DLLME method. Furthermore, the developed USA-TC-IL-DLLME method was succesfully applied to real samples for the preconcentration of Brilliant Blue FCF.

Recent Advances in Dispersive Liquid-Liquid Microextraction for Pharmaceutical Analysis.

Sample clean-up and pre-concentration are critical components of pharmaceutical analysis. The dispersive liquid-liquid microextraction (DLLME) technique is widely recognized as the most effective approach for enhancing overall detection sensitivity. While various DLLME modes have been advanced in pharmaceutical analysis, there need to be more discussions on pre-concentration techniques specifically developed for this field. This review presents a comprehensive overview of the different DLLME modes used in pharmaceutical analysis from 2017 to May 2023. The review covers the principles of DLLME, the factors affecting microextraction, the selected applications of different DLLME modes, and their advantages and disadvantages. Additionally, it focuses on multi-extraction strategies employed for pharmaceutical analysis.

Evaluation of distribution of emerging mycotoxins in human tissues: applications of dispersive liquid-liquid microextraction and liquid chromatography-mass spectrometry.

In this work, a complete study of the distribution of emerging mycotoxins in the human body has been carried out. Specifically, the presence of enniatins (A, A1, B, B1) and beauvericin has been monitored in brain, lung, kidney, fat, liver, and heart samples. A unique methodology based on solid-liquid extraction (SLE) followed by dispersive liquid-liquid microextraction (DLLME) was proposed for the six different matrices. Mycotoxin isolation was performed by adding ultrapure water, acetonitrile, and sodium chloride to the tissue sample for SLE, while the DLLME step was performed using chloroform as extraction solvent. Subsequently, the analysis was carried out by high-performance liquid chromatography coupled to tandem mass spectrometry (HPLC-MS/MS). The proposed method allowed limits of quantification (LOQs) to be obtained in a range of 0.001-0.150 ng g-1, depending on the tissue and mycotoxin. The precision was investigated intraday and interday, not exceeding of 9.8% of relative standard deviation. In addition, trueness studies achieved 75 to 115% at a mycotoxin concentration of 25 ng g-1 and from 82 to 118% at 5 ng g-1. The application of this methodology to 26 forensic autopsies demonstrated the bioaccumulation of emerging mycotoxins in the human body since all mycotoxins were detected in tissues. Enniatin B (ENNB) showed a high occurrence, being detected in 100% of liver (7 ± 13 ng g-1) and fat samples (0.2 ± 0.8 ng g-1). The lung had a high incidence of all emerging mycotoxins at low concentrations, while ENNB, ENNB1, and ENNA1 were not quantifiable in heart samples. Co-occurrence of mycotoxins was also investigated, and statistical tests were applied to evaluate the distribution of these mycotoxins in the human body.

Dispersive liquid-liquid microextraction (DLLME) for determination of tricyclic antidepressants in whole blood and plasma samples and analysis by liquid chromatography with diode array detector (LC-DAD).

Microextractions have been developed for the tricyclic antidepressants (TCAs) analysis in biological matrices, including dispersive liquid-liquid microextraction (DLLME). The proposed DLLME employed 490 µL of biological sample (whole blood or plasma), which were added 15 mg of NaCl, 10 µL of medazepam as internal standard (10 µg/mL) and 100 µL of 2 M NaOH. This mixture was homogenized by vortex (2800 rpm/10 s) and 400 µL of hexane (extractor solvent) with 600 µL of methanol (dispersing solvent) were added to the sample. After the vortex step (2800 rpm/5 s), an ultrasonic bath for 300 s was employed. Then, this content was centrifuged (10 min/10000 rpm), organic phase was collected and dried under air flow. After, 30 µL of the mobile phase was used for resuspension and 20 µL is injected into LC-DAD. This method was optimized and fully validated according to UNODC and SWGTOX guidelines, reaching limits of detection equivalent to analytical methodologies that employ mass spectrometry (MS). Also, it was applied in real cases involving suspected exposure to TCAs. So, the developed DLLME for the determination of TCAs in whole blood and plasma samples proved to be a simple, reliable, robust and reproducible method that can be used in toxicology and clinical laboratories.

A new method for the therapeutic drug monitoring of chlorpromazine in plasma by gas chromatography-mass spectrometry using dispersive liquid-liquid microextraction.

Background: Chlorpromazine is the first antipsychotic drug developed and is included in the list of 'essential drugs' prepared by the WHO. Therapeutic drug monitoring is an important point for psychotropic drugs because of significant genetic variability in their metabolism and poor compliance of the patients with treatment. Method: We developed a novel GC-MS method using dispersive liquid-liquid microextraction for the therapeutic monitoring of chlorpromazine. Results: The method was validated according to the European Medicines Agency guidelines. The developed method's lower limit of quantification was set as 30 ng/ml. The calibration curve of chlorpromazine was validated between 30 and 600 ng/ml, with correlation coefficients of more than 0.99. Conclusion: The developed method was applied to real human patient plasma.

Commercial beers: A source of phthalates and di-ethylhexyl adipate.

Beer is one of the most consumed beverages worldwide. Different materials used along its production and packaging can result in human exposure to phthalates and adipates. The aim of this study was to assess simultaneously the levels of phthalates and di-ethylhexyl adipate (DEHA) in commercial beer samples (n = 66) with a method based on DLLME and detection with GC-MS/MS, and further evaluate human exposure. Six out of seven compounds studied were found in the beers analysed, with levels ranging from 1.77 to 205.40 µg/L. The most prevalent was DEHA at 205.40 µg/L, while dimethyl phthalate (DMP) was not present in any sample. Samples with 5-6 % alcohol, packed in aluminium cans and produced in an industrial environment presented the highest level of these contaminants. Despite low-risk exposure to phthalates and adipate with beer, it is important to remember the ubiquitous nature of these compounds, which can lead to cumulative exposure.

Optimisation of dispersive liquid-liquid microextraction for plasma sample preparation in bioanalysis of CDK4/6 inhibitors in therapeutic combinations for breast cancer treatment.

Cyclin D dependent kinase 4 and 6 (CDK 4/6) inhibitors are novel anticancer drugs used in therapeutic combinations with endocrine therapy for breast cancer treatment. Their determination in patient plasma is of high interest as a prerequisite for possible therapeutic drug monitoring. Dispersive liquid-liquid microextraction (DLLME) shows great potential in bioanalytical sample preparation. Its simplicity and speed, along with the suitability for using small amounts of sample and hazardous solvents are some of its main advantages. However, its application on plasma samples is scarce and requires further development. The aim of this work was to explore the applicability of DLLME in the simultaneous extraction of six drugs of interest from human plasma, with an emphasis placed on achieving high extraction recoveries with low sample and solvent consumption. To tackle the low availability and amount of the plasma sample, as well as the complexity of the biological matrix, three novel DLLME modes are proposed: organic sample DLLME (OrS-DLLME), aqueous sample DLLME (AqS-DLLME), and a modified air-assisted DLLME (AA-DLLME). The extractant and disperser type and volume, volume ratios of all the components in the ternary system, effect of pH and salting out were optimised for all three proposed modes of DLLME. Optimised representative DLLME-HPLC-DAD-FLD method was validated and shown to be linear (R > 0.994), precise (RSD ≤13.8%, interday), accurate (bias -13.1-13.1%, interday) and robust (relative effect -3.34-6.08%). Simultaneous extraction of all six drugs with high recoveries (81.65-95.58%) was achieved. Sample volumes used were as low as 50-100 µL, with necessary organic solvent volumes in µL ranges. Greenness scores obtained using the AGREE software were between 0.63 and 0.66, demonstrating compliance with green analytical chemistry principles. Finally, the validated method was successfully applied on breast cancer patient plasma samples.

Chemometric assisted natural DES based VA-DLLME-LC-MS/MS method for the quantitative determination of Garcinol in biofluids/tissues: A practical application to pharmacokinetics and biodistribution studies.

Garcinol (GAR) is a polyisoprenylated benzophenone obtained from Garcinia indica used as anti-oxidant and anti-inflammatory in traditional medicine and due to these activities, it possesses anticancer properties. It is considered to be a next generation epigenetic drug. A green solvent based analytical method which is efficient, sophisticated, and highly enriched has been developed for the quantitative analysis of GAR in biological samples (plasma, liver, kidney and spleen) with the use of deep eutectic solvent (DES) for its extraction. A series of 23 DESs were synthesized and out of which, Thymol (Th)-Terpeniol (T), 2:1 molar ratio with a more hydrophobic environment and high interaction efficiency between GAR and DES was identified for the better extraction from mice plasma and tissue samples. The Design of Experiment approaches like placket-burmann design and central composite design were used to optimize the method conditions. The method validation characteristics, such as limit of detection (0.193-0.237 ng/mL), limit of quantification (0.644-0.697 ng/mL), lower limit of quantification (0.5 ng/mL), broad range of linearity with R2 (0.9994-0.9997) with a percent recovery not less than 87% was observed, which are well within the acceptance criteria for a bioanalytical method. The enrichment factor is upto 53-60 folds, with high extraction efficiency (89-97%). The measurement uncertainty was estimated with an expanded uncertainty ranged between 10.9%-19.0%. The method developed and validated was effectively applied to examine the pharmacokinetic and biodistribution patterns for GAR in mice.

New Advances in Dye Analyses: In Situ Gel-Supported Liquid Extraction from Paint Layers and Textiles for SERS and HPLC-MS/MS Identification.

To date, it is still not possible to obtain exhaustive information about organic materials in cultural heritage without sampling. Nonetheless, when studying unique objects with invaluable artistic or historical significance, preserving their integrity is a priority. In particular, organic dye identification is of significant interest for history and conservation research, but it is still hindered by analytes' low concentration and poor fastness. In this work, a minimally invasive approach for dye identification is presented. The procedure is designed to accompany noninvasive analyses of inorganic substances for comprehensive studies of complex cultural heritage matrices, in compliance with their soundness. Liquid extraction of madder, turmeric, and indigo dyes was performed directly from paint layers and textiles. The extraction was supported by hydrogels, which themselves can undergo multitechnique analyses in the place of samples. After extraction, Ag colloid pastes were applied on the gels for SERS analyses, allowing for the identification of the three dyes. For the HPLC-MS/MS analyses, re-extraction of the dyes was followed by a clean-up step that was successfully applied on madder and turmeric. The colour change perceptivity after extraction was measured with colorimetry. The results showed ΔE values mostly below the upper limit of rigorous colour change, confirming the gentleness of the procedure.