Spatial response of urban land use intensity to ecological networks: a case study of Xi'an Metropolitan Region, China.

In the face of the persistent degradation of ecological environments and fragmentation of ecological networks brought about by rapid urbanization, this study focuses on examining the interaction between urban land use intensity and ecological networks in the Xi'an Metropolitan Region (XAMR), China, and their impact on ecological equilibrium and sustainable development. By comprehensively evaluating the changes in land use intensity in XAMR from 2010 to 2020, the aim is to underscore the pivotal role of ecological networks in maintaining urban ecological balance and promoting sustainable development. The findings indicate a transition in land use intensity in the XAMR from low to high concentration, reflecting an intensification in land resource utilization during urbanization. However, the establishment and management of ecological networks can significantly enhance urban ecological security and biodiversity. Notably, this research identified crucial ecological corridors and source areas, augmenting the connectivity of urban green infrastructure and providing vital support for urban biodiversity. Additionally, a significant finding of this study is the spatial spillover effects generated by socioeconomic factors such as the proportion of tertiary and secondary industries and per capita GDP through the ecological network, which have profound impacts on land use intensity in the surrounding areas. These insights offer a novel understanding of the complex interactions within urban ecosystems, emphasizing the importance of incorporating ecological network construction in urban planning. Overall, through a comprehensive analysis of the relationship between the ecological network and land use intensity in the XAMR, this study proposes new directions for urban ecosystem management and land use planning, highlighting the significance of scientific ecological network planning and management in achieving long-term sustainable development in urbanization processes.

Unveiling Microbial Nitrogen Metabolism in Rivers using a Machine Learning Approach.

Microbial nitrogen metabolism is a complicated and key process in mediating environmental pollution and greenhouse gas emissions in rivers. However, the interactive drivers of microbial nitrogen metabolism in rivers have not been identified. Here, we analyze the microbial nitrogen metabolism patterns in 105 rivers in China driven by 26 environmental and socioeconomic factors using an interpretable causal machine learning (ICML) framework. ICML better recognizes the complex relationships between factors and microbial nitrogen metabolism than traditional linear regression models. Furthermore, tipping points and concentration windows were proposed to precisely regulate microbial nitrogen metabolism. For example, concentrations of dissolved organic carbon (DOC) below tipping points of 6.2 and 4.2 mg/L easily reduce bacterial denitrification and nitrification, respectively. The concentration windows for NO3--N (15.9-18.0 mg/L) and DOC (9.1-10.8 mg/L) enabled the highest abundance of denitrifying bacteria on a national scale. The integration of ICML models and field data clarifies the important drivers of microbial nitrogen metabolism, supporting the precise regulation of nitrogen pollution and river ecological management.

Efficiency and ecological safety of herbicide haloxyfop-R-methyl on removal of coastal invasive plant Spartina alterniflora.

Spartina alterniflora is a global invasive plant and has caused considerable damage to coastal wetland ecosystem. This study evaluated the efficiency and ecological safety of herbicide haloxyfop-R-methyl (HPME) in removing S alterniflora in Laizhou Bay. The results showed that the density of regenerated S. alterniflora after 10 months of application of 0.01, 0.02 and 0.03 g/m2 HPME decreased by 86.67 %, 99.16 % and 99.31 %, respectively. Moreover, seed abortion rates were 62.25 %, 92.24 % and 94.82 %, and weight of roots in HPME groups were 56.63 %, 59.99 %, and 40.10 % of those in the control group. After 4 days of application, HPME could not be detected in S. alterniflora and sediments. In addition, HPME did not change sediment physicochemical properties, macrozoobenthos community and microbial community structure during 16 days, but increased the density of native macrozoobenthos after 1 year. Therefore, HPME might be an effective and ecologically safe chemical for the eradication of S. alterniflora.

Degradation, adsorption, and bioaccumulation of novel triketone HPPD herbicide tembotrione.

Tembotrione is a new triketone HPPD herbicide widely used in Europe, USA, and other areas. However, tembotrione is moderately to highly toxic to algae and daphnia in aquatic ecosystems. In this study, hydrolysis, photolysis, soil degradation, soil adsorption, and bioaccumulation of tembotrione were systematically studied. Hydrolysis experiment revealed that tembotrione was stable in acidic, neutral, and alkaline conditions with half-lives of 231-289 days. The photolysis half-lives of tembotrione were 112-158 days and 76-107 days in pH 4, 7, 9 buffer solutions and on three soils surface, respectively, which demonstrated that tembotrione could be persisted in soil and water. Meanwhile, tembotrione Kfoc was 128-196 mL/g, indicating that tembotrione was not easily adsorbed to soil, and the adsorption capacity increased with the decrease in pH. The half-lives of tembotrione in the test soil were 32-48 days, and high organic matter soil is conducive to microbial activity and accelerates the degradation of tembotrione. Moreover, bioaccumulation experiment demonstrated that tembotrione with a BCF of 0.664 to 0.724 had a low risk of exposure to zebrafish. This study is very helpful for the evaluation environmental risk and safe use of tembotrione.

Impact of Transgenic Cry1Ab/2Aj Maize on Abundance of Non-Target Arthropods in the Field.

Transgenic Bacillus thuringiensis (Bt) maize has broad prospects for application in China. Before commercialization, it is necessary to assess possible ecological impacts, including impacts on non-target arthropods (NTAs) in the field. In the present study, transgenic Bt maize expressing cry1Ab/2Aj and its corresponding non-transformed near isoline were planted under the same environmental and agricultural conditions, and arthropods in the field were collected during the three main growth stages of maize. In a one year trial, the results showed the composition of NTA communities in the transgenic and control maize fields were similar. There were no significant differences for community-level parameters of species richness (S), Shannon-Wiener diversity index (H'), evenness index (J) and Simpson's dominant concentration (C) between the two types of maize fields. Likewise, a Bray-Curtis dissimilarity and distance analysis showed that Cry1Ab/2Aj toxin exposure did not increase community dissimilarities between Bt and non-Bt maize plots and that the structure of the NTAs community was similar on the two maize varieties. Furthermore, planting of the transgenic cry1Ab/2Aj maize did not affect the density or composition of non-target decomposers, herbivores, predators, parasitoids and pollinator guilds. In summary, our results showed that planting of Bt maize producing Cry1Ab/Cry2Aj proteins do not adversely affect population dynamics and diversity of NTAs.

Application of cellulose nanocrystals in water treatment membranes: A review.

Nanomaterials have brought great changes to human society, and development has gradually shifted the focus to environmentally friendly applications. Cellulose nanocrystals (CNCs) are new one-dimensional nanomaterials that exhibit environmental friendliness and ensure the biological safety of water environment. CNCs have excellent physical and chemical properties, such as simple preparation process, nanoscale size, high specific surface area, high mechanical strength, good biocompatibility, high hydrophilicity and antifouling ability. Because of these characteristics, CNCs are widely used in ultrafiltration membranes, nanofiltration membranes and reverse osmosis membranes to solve the problems hindering development of membrane technology, such as insufficient interception and separation efficiency, low mechanical strength and poor antifouling performance. This review summarizes recent developments and uses of CNCs in water treatment membranes and discusses the challenges and development prospects of CNCs materials from the perspectives of ecological safety and human health by comparing them with traditional one-dimensional nanomaterials.

Optimization of Technological Parameters of the Process of Forming Therapeutic Biopolymer Nanofilled Films.

The prospects of using biopolymer nano-containing films for wound healing were substantiated. The main components of biopolymer composites are gelatin, polyvinyl alcohol, glycerin, lactic acid, distilled water, and zinc oxide (ZnO) nanoparticles (NPs). Biopolymer composites were produced according to various technological parameters using a mould with a chrome coating. The therapeutic properties of biopolymer films were evaluated by measuring the diameter of the protective effect. Physico-mechanical properties were studied: elasticity, vapour permeability, degradation time, and swelling. To study the influence of technological parameters of the formation process of therapeutic biopolymer nanofilled films on their therapeutic and physico-mechanical properties, the planning of the experiment was used. According to the results of the experiments, mathematical models of the second-order were built. The optimal values of technological parameters of the process are determined, which provide biopolymer nanofilled films with maximum healing ability (diameter of protective action) and sufficiently high physical and mechanical properties: elasticity, vapour permeability, degradation time and swelling. The research results showed that the healing properties of biopolymer films mainly depend on the content of ZnO NPs. Degradation of these biopolymer films provides dosed drug delivery to the affected area. The products of destruction are carbon dioxide, water, and a small amount of ZnO in the bound state, which indicates the environmental safety of the developed biopolymer film.

Nanomaterial-Augmented Formulation of Disinfectants and Antiseptics in Controlling SARS CoV-2.

The worldwide COVID-19 pandemic has brought significant consideration toward innovative strategies for overcoming the viral spread. Nanotechnology will change our lives in several forms as its uses span from electronics to pharmaceutical procedures. The use of nanoparticles provides a possibility to promote new antiviral treatments with a low possibility of increasing drug resistance compared to typical chemical-based antiviral treatments. Since the long-term usage of disinfectants and antiseptics at high concentrations has deleterious impacts on well-being and the environment, this review was intended to discuss the antiviral activity of disinfectants and antiseptics required for their activity against respiratory viruses especially SARS-CoV-2. It could improve the inhibition of viral penetration into cells, solvation of the lipid bilayer envelope, and ROS production, therefore enhancing the effect of disinfectants. However, significant concerns about nanomaterial's hazardous effects on individuals and the environment are increasing as nanotechnology flourishes. In this review, we first discuss the significant and essential types of nanomaterials, especially silver and copper, that could be used as antiviral agents and their viral entry mechanisms into host cells. Further, we consider the toxicity on health, and environmental concerns of nanoparticles. Eventually, we present our outlook on the fate of nanomaterials toward viral diseases.

Mechanistic revealing of reproductive behavior impairment in male guppy (Poecilia reticulata) induced by environmentally realistic 2,2'-dithiobis-pyridine exposure.

Although (PS)2, the primary degradation product of emerging antifouling biocides metal pyrithiones (MePTs), can disrupt the reproductive behavior of fish at an environmentally relevant ng/L level, the underlying mechanism is still largely unknown. This study exposed sexually mature male guppy (Poecilia reticulata) to 20, 200, and 2000 ng/L (PS)2 to explore the compromised effect of (PS)2 on reproductive behavior through a realistic competing scenario. The results showed that (PS)2 suppressed male guppies' sexual interest to stimulus females, reduced their competitive behavior frequencies toward rival males, and decreased their mating time and frequency. (PS)2 exposure did not affect male guppies' secondary sexual characteristics or induce estrogenic activity. Whole-brain transcriptome sequencing identified 1070 differentially expressed genes (DEGs) with 872 up-regulated genes, which were functionally enriched into Gene Ontology terms pertaining to extracellular matrix (ECM) and extracellular region. KEGG enrichment for the DEGs uncovered that the activations of ECM-receptor interaction and focal adhesion pathways could be the underlying molecular mechanism implicated in the (PS)2 induced reproductive behavior impairment. This work would deliver a substantial contribution to the understanding of the ecological safety of MePTs biocides.

Combined exposure to environmentally relevant copper and 2,2'-dithiobis-pyridine induces significant reproductive toxicity in male guppy (Poecilia reticulata).

Metal pyrithiones (MePTs), the most widely used biocides in antifouling paints (AFs) coated on the hulls, are usually used in combination with Cu-containing substances. In the aquatic environment, 2,2'-dithiobis-pyridine ((PS)2), the main degradation product of MePTs, and Cu usually coexist. However, their combined impacts on aquatic organisms are unclear. This study exposed male guppy (Poecilia reticulata) to an environmentally realistic concentration of Cu (10 µg/L) alone or Cu (10 µg/L) combined with 20, 200, and 2000 ng/L (PS)2 to explore their combined reproductive toxicity. The results showed that co-exposure to Cu and (PS)2 increased Cu accumulation in the fish body in a dose-dependent manner and induced obvious spermatozoon apoptosis and necrosis, which was mediated by the peroxidation and caspase activation. Compared to Cu alone, co-exposure to Cu and 200, 2000 ng/L (PS)2 significantly decreased the testosterone level and collapsed spermatogenesis, and depressed male's sexual interest and mating behavior were observed in three co-exposure groups. Moreover, co-exposure to Cu and (PS)2 increased the disturbance on cyp19a and cyp19b transcription and suppressed the "display" reproductive behavior. Eventually, co-exposure to Cu and (PS)2 caused male reproductive failure. Therefore, the concurrence of Cu and (PS)2 induced significant reproductive toxicity in male guppies and would threaten the sustainability of fish populations. Considering the extensive usage of MePTs products in the AFs, their ecological risk warrants more evaluation.

Evaluation of the effect of transgenic Bt cotton on snails Bradybaena (Acusta) ravida and Bradybaena similaris (Ferussac).

The impact of transgenic crops on non-target organisms is a key aspect of environmental safety assessment to transgenic crops. In the present study, we fed two snail species, Bradybaena (Acusta) ravida (B. ravida) and Bradybaena similaris (Ferussac)(B. similaris), with the leaves of transgenic Bt cotton Zhong 30 (Z30) and control cotton, its parent line zhong 16 (Z16), to assess the environmental safety of Bt cotton to common non-target organisms in the field. Survival, body weight, shell diameter, helix number, reproduction rate, superoxide dismutase (SOD) activity and Bt protein concentration in snails were monitored in 15 days and 180 days experiments. We also monitored the population dynamics of B. ravida and B. similaris in Z30 and Z16 cotton fields for two successive years. Compared to the snails fed on the control cotton Z16, there was no significant difference in survival, growth, reproduction, and SOD activity on Bt cotton Z30. Bt protein concentrations were significantly between different treatments, and Bt protein residues were only detected in the feces of the Z30 treatment. According to the field data, the number of B. ravida and B. similaris fluctuated considerably across seasons over the entire cotton-growing season; however, there were no significant differences between the Bt and control cotton fields at similar time. As the results showed, in our experiments, Bt cotton Z30 had no adverse effects on the two snail species, both in the laboratory and in the fields.

Profiles of and variations in aluminum species in PAC-MC used for the removal of blooming microalgae.

Polyaluminum chloride modified clay (PAC-MC) is a safe and efficient red tide control agent that has been studied and applied worldwide. Although it is well known that the distribution of hydrolytic aluminum species in PAC affects its flocculation, little is known about the influence of particulars aluminum species on the microalgae removal efficiency of PAC-MC; this lack of knowledge creates a bottleneck in the development of more efficient MCs based on aluminum salts. The ferron method was used in this study to quantitatively analyze the distributions of and variations in different hydrolytic aluminum species during the process of microalgae removal by PAC-MC. The results showed that Ala, which made up 5%-20% of the total aluminum, and Alp, which made up 15%-55% of the total aluminum, significantly affected microalgae removal, with Pearson's correlation coefficients of 0.83 and 0.89, respectively. Most of the aluminum in the PAC-MC sank rapidly into the sediments, but the rate and velocity of settlement were affected by the dose of modified clay. The optimal dose of PAC-MC for precipitating microalgae was determined based on its aluminum profile. These results provide guidance for the precise application of PAC-MC in the control of harmful algal blooms.

Micropollutants and biological effects as control indexes for the operation and design of shallow open-water unit ponds to polish domestic effluent.

Additional control indexes should be considered for the operation and design of post-treatment systems, as the wastewater treatment objectives are developing toward protecting the safety of ecological environments. In this study, two control indexes were selected and examined systematically in pilot-scale shallow open-water unit (SOWU) ponds for domestic effluent polishing: micropollutants and biotoxicities. The total risk quotient (RQTotal ≤ 1) and effect-based trigger value (EBT) were set as the thresholds for known micropollutants and biological effects, respectively. The results showed that RQTotal of micropollutants (n = 46) could be mitigated to an acceptable level and the luminescent bacteria toxicity was in compliance with the EBT after SOWU polishing in the warm season. The reduction of micropollutants and biotoxicities in the SOWUs both fit the k-C* model well (R2 > 0.9) in the warm and cold seasons. Finally, the k-C* model integrated with the control indexes was developed to design the SOWU dimensions, and the results indicated that a pond area of 21.7-108.5 m2 was required for every 1 m3/d of effluent when micropollutants were set as the control index, while a pond area of 3.6-18.2 m2 was required when luminescent bacteria toxicity was set as the control index.

The survival and removal mechanism of Sphingobacterium changzhouense TC931 under tetracycline stress and its' ecological safety after application.

Sphingobacterium changzhouense TC931 was isolated as a novel TC (tetracycline) removal bacterium through adsorption on extracellular polymerase substances (EPS) and cellular surface and biodegradation. TC biodegradation efficiency by strain TC931 was affected by solution initial pH and carbon source. Polysaccharides and hydrocarbons in EPS and cellular surface were responsible for TC biosorption. Eight possible biodegradation products were identified and the biodegradation pathway was proposed. Strain TC931 was rich in antibiotic resistance genes, and tetX-TC931 and antibiotics resistance genome island (GI) may be acquired via horizontal gene transfer in early evolutionary history. The GI was incomplete and may stable in strain TC931, but it could develop into an intact and transferability GI with help of other mobile genetic elements. This work offers a theoretical basis for understanding the survival and biodegradation mechanisms of S. changzhouense TC931 under TC stress, and offers an ecological safety assessment for its application in environmental bioremediation.

Study of the oil geopermeation patterns: A case study of ANSYS CFX software application for computer modeling.

Mathematical simulation of oil permeation through the porous media is the crucial topical problem in the framework of localization and liquidation of emergency oil spills. The main objective of this study was to establish the oil contamination level and oil contamination depth for different soil types which is of particular relevance from the standpoint of environmental safety. Four types of soils were taken for investigation as follows Cambisol with sand texture (No. 1), Luvisol (gray forest), with loamy sand texture (No. 2), Black Typical Chernozem with sandy loam texture (No. 3), Kastanozem (pine forest terrace under the pines) with sand texture (No. 4). The task of predicting the temporal-spatial indicators of oil permeation in the soil during accidental spills was solved using ANSYS CFX software allowing to simulate the absorption amount of oil into the ground. Visualization of oil concentration and velocity for studied soil samples was carried out. Determination of petroleum hydrocarbons concentration by the gravimetric method indicated a direct correlation between oil content in the soil and the porosity of the investigated soil samples. In order to determine the rate of hydrocarbon permeation through the dry and wet soil layer comparative experiments were carried out for the following systems: oil - dry soil and oil - wet soil. Permeation coefficients for dry samples from No. 1 to No. 4 were set at the rate 0.0073 m ∙ day-1, 0.0077 m ∙ day-1, 0.0083 m ∙ day-1, 0.0067 m ∙ day-1 respectively, and for wet soils 0.0083 m ∙ day-1, 0.0093 m ∙ day-1, 0.0093 m ∙ day-1, 0.0083 m ∙ day-1 consequently. The obtained hydrocarbon permeation coefficients for different systems allow calculating the depth of oil penetration for a given time after the spill, taking into account soil moisture. The dependence of oil concentration and permeation rate distribution through the soil fully reflects reliability of the experimental data, thereby confirming the verification of the adequacy of the computer model based on the ANSYS CFX software.

[Technological Classification of Cadmium Quality in the Rice Producing Areas of South China].

Classifying the quality of agricultural products is an important means of managing the arable land quality and guaranteeing the quality and safety of agricultural products. This work is planned to be completed in 2020. However, there is still no perfect method or technology for classifying the quality of arable lands. The species sensitivity distribution (SSD) has become commonly used for determining ecological safety thresholds since it takes into account differences in species sensitivity, the physical and chemical properties of soils, biological availability, and sources of pollutants. However, it has not yet been applied to the classification of arable land quality. Therefore, based on the routine monitoring data of rice production areas in southern China from the Agro-environmental Monitoring Center of China, this study proposes the use of species sensitivity distributions to classify the environmental quality of cadmium in rice production areas. The scientific rationale of this method was also discussed in order to provide an important reference for the construction and improvement of the classification system for arable land quality in China. The results showed that the pH, soil organic matter, and cation exchange capacity of the physical and chemical properties of soils significantly affected the enrichment of cadmium in rice, and this relationship was used to establish the cadmium transfer equation in the soil-rice system. It was found that there were obvious differences in the cadmium enrichment abilities of different rice varieties, which were mainly caused by the differences in their genotypes. According to the species sensitivity distributions, soil cadmium thresholds were obtained, which yielded a priority protection class of less than 0.26 mg·kg-1 and strict control class of greater than 1.67 mg·kg-1, between which are the safe use classes. The results were verified through independent datasets, and it was found that the application of species sensitivity distributions to classify the environmental quality of cadmium in rice producing areas reflected good scientific rationale and operability. This study may provide a foundation for the construction and improvement of the arable land quality classification system in China.

Investigation and assessment of micropollutants and associated biological effects in wastewater treatment processes.

Currently, the wastewater treatment plants (WWTPs) attempt to achieve the shifting from general pollution parameters control to reduction of organic micropollutants discharge. However, they have not been able to satisfy the increasing ecological safety needs. In this study, the removal of micropollutants was investigated, and the ecological safety was assessed for a local WWTP. Although the total concentration of 31 micropollutants detected was reduced by 83% using the traditional biological treatment processes, the results did not reflect chemicals that had poor removal efficiencies and low concentrations. Of the five categories of micropollutants, herbicides, insecticides, and bactericides were difficult to remove, pharmaceuticals and UV filters were effectively eliminated. The specific photosynthesis inhibition effect and non-specific bioluminescence inhibition effect from wastewater were detected and evaluated using hazardous concentration where 5% of aquatic organisms are affected. The photosynthesis inhibition effect from wastewater in the WWTP was negligible, even the untreated raw wastewater. However, the bioluminescence inhibition effect from wastewater which was defined as the priority biological effect, posed potential ecological risk. To decrease non-specific biological effects, especially of macromolecular dissolved organic matter, overall pollutant reduction strategy is necessary. Meanwhile, the ozonation process was used to further decrease the bioluminescence inhibition effects from the secondary effluent; ≥ 0.34 g O3/g DOC of ozone dose was recommended for micropollutants elimination control and ecological safety.

A research on urban eco-security evaluation and analysis: complex system's brittle structure model.

Urban ecosystem has become a critical part of ecological security and draws much attention worldwide. It is both a result of natural ecological system development, and also an inevitable outcome of human ecological system development within a certain stage, with the objective of identifying the possible improvement space for unban ecological security evaluation from complex system perspective. Based on the brittle structure model and set pair theory, this paper firstly explored the main research methods of urban ecological security theory and its characteristics, then conducted a theory of complex system brittleness to analyze the urban ecological security brittle factors, brittle primitives, and brittle structure. Furthermore, it conducted a model of urban ecological system brittleness correlation entropy together with a set pair analysis method to discuss its brittleness. And finally, an ecological safety evaluation has been presented based on the empirical case in Chengdu City of China. The theoretical and empirical analysis shows that the brittle correlation entropy of natural subsystem in urban ecological security is the biggest one. The risks from natural subsystem collapse can easily trigger the brittleness of the entire urban system. The corresponding maximum brittle fluctuation entropy is from economic subsystem; it has a largest impact on the entropy change of urban ecosystem. The way of reducing the uncertainty of urban ecological risks is to lower difference degree coefficient in the system. Relevant decision makers should consider to reduce the increasing degree of entropy and eliminate the fluctuation of the brittle factors. Thus, the threats or risks of urban ecological system can be within the acceptable range and under control. An integrated system management combing with brittleness characters of natural, economics, and social subsystem is necessary. It is helpful for the ecological security construction.

Occurrence, ecotoxicological risks of sulfonamides and their acetylated metabolites in the typical wastewater treatment plants and receiving rivers at the Pearl River Delta.

Sulfonamides (SAs) were frequently detected in various environmental water bodies because of their incomplete removal during wastewater treatment process, and this may lead to a negative effect on aquatic ecosystems. This study investigated six SAs and three of their acetylated metabolites in the influents, effluents, and the receiving river waters from four typical wastewater treatment plants (WWTPs) at the Pearl River Delta in Guangdong province, China. The results indicated that sulfadiazine, sulfapyridine and sulfamethoxazole had the highest detection frequency. Moreover, sulfadiazine and sulfamethoxazole had its maximum concentrations (216 ng/L and 200 ng/L, respectively) in the influent during dry season. To evaluate the compound degradability, the removal efficiency of each individual sulfonamide was calculated, and a modified method to assess it was recommended considering the widespread inter-conversion between SAs and their metabolites. Finally, regarding the effluent and river water, potential environmental risk based on the Hazard quotients (HQs) was estimated towards three diverse non-targeted organisms. Sulfamethoxazole was assessed with the highest HQ (>3.6), being the sole sulfonamide that would pose a risk to algae in the effluents and river waters. Thus, SAs emission needs to be further reduced from WWTPs into the environment.

Assessing the Spatial Distribution of Soil PAHs and their Relationship with Anthropogenic Activities at a National Scale.

Soil polycyclic aromatic hydrocarbon (PAH) pollution is a major concern due to its negative impact on soil quality around the world. In China, accurate data on soil PAHs and information on the relationship with anthropogenic activities are limited. In this study, about 30,800 samples from 1833 soil sample sites were reviewed from 306 published reports to build a soil PAHs database. Based on the data obtained, the results demonstrated that 24.11% of surface soils in China are heavily contaminated. Meanwhile, the concentration of soil PAHs varied, in the order of independent mining and industrial areas (IMIA) > urban areas > suburban areas > rural areas, and the spatial distribution in China demonstrated a descending trend from north to south. Moreover, the characteristic ratio and PCA-MLR (principal component analysis-multiple linear regression) analysis demonstrated that coal combustion and vehicular exhaust emissions were the main sources of soil PAH pollution in China. On the other hand, provincial total Σ16PAHs in surface soil were significantly correlated with the per square kilometer GDP (gross domestic product) of industrial land, the per capita GDP, as well as the production and consumption of energy. These results indicate that anthropogenic factors have greatly affected the levels of soil PAHs in China. This study improves our understanding on the status and sources of soil PAH contamination in China, thereby facilitating the implementation of strategies of prevention, control, and remediation of soils.