The development of sodium reduction targets for New Zealand fast foods and a comparison with the current sodium contents of products.

Sodium intake attributed to fast food is increasing globally. This research aims to develop maximum sodium reduction targets for New Zealand (NZ) fast foods and compare them with the current sodium content of products. Sodium content and serving size data were sourced from an existing database of major NZ fast-food chains. Target development followed a step-by-step process, informed by international targets and serving sizes, and previous methods for packaged supermarket foods. Sodium reduction targets were set per 100 g and serving, using a 40% reduction in the mean sodium content or the value met by 35-45% of products. Thirty-four per cent (1797/5246) of products in the database had sodium data available for target development. Sodium reduction targets were developed for 17 fast-food categories. Per 100 g targets ranged from 158 mg for 'Other salads' to 665 mg for 'Mayonnaise and dressings'. Per serving targets ranged from 118 mg for 'Sauce' to 1270 mg for 'Burgers with cured meat'. The largest difference between the current mean sodium content and corresponding target was for 'Other salads' and 'Grilled Chicken' (both -40% per 100g) and 'Fries and potato products' (-45% per serving), and the smallest, 'Pizza with cured meat toppings' (-3% per 100 g) and 'Pies, tarts, sausage rolls and quiches' (-4% per serving). The results indicate the display of nutrition information should be mandated and there is considerable room for sodium reduction in NZ fast foods. The methods described provide a model for other countries to develop country-specific, fast-food sodium reduction targets.

Molecularly imprinted polymer based on covalent organic framework coated steel substrate as the mass spectrometric ionization source for the direct detect of aflatoxins in complex food matrices.

Ambient mass spectrometry allows direct analysis of various sample types with minimal or no pretreatment. However, due to the influence of matrix effects, there are sensitivity and issues in analyzing trace analytes in complex food samples. In this work, we developed a spray mass spectrometry platform based on SSS@TPBD-TPA@MIPs (Stainless steel substrate (SSS), terephthalaldehyde (TPA), N, N, N', N'-tetrakis(p-aminophenyl)-p-phenylenediamine (TPBD), molecularly imprinted polymer (MIP)), for rapid, in situ, high-throughput, highly enrichment efficiency and highly selective trace analysis of aflatoxins. By simplifying the sample pretreatment and directly applying high voltage for ESI-MS, the analysis can be completed within 1 min. The established method base on SSS@TPBD-TPA@MIPs exhibited high sensitivity and accuracy when determine trace level AFs in maize and peanuts. The results demonstrated a good linear relationship within the range of 0.01-10 µg/L, with the determination coefficient (R2) ≥ 0.9956. The limits of detection (LODs) was 0.035-0.3 ng/mL and limits of quantitation (LOQs) was 0.12-0.99 ng/mL, with acceptable recovery rate of 82.09-115.66 % and good repeatability represented by the relative standard deviation (RSD) less than 17.43 %. Furthermore, SSS@TPBD-TPA@MIPs exhibited excellent reusability, with more than 8 repeated uses, and showed good adsorption performance.

Peculiarities in Rabi oscillations for fast-relaxing electron spins.

Rabi oscillations (transient nutations) are a phenomenon that has proven itself well in EPR for identifying electron spin quantum numbers and electron-spin transitions. They are successfully applied when the Rabi frequency significantly exceeds the spin relaxation rates and therefore does not depend on these rates. However, the short transverse relaxation time, being comparable to or even shorter than the dead time of EPR spectrometers, makes it difficult to observe Rabi oscillations and their frequency depends not only on the intensity of the short microwave pulse, but also on its shape and relaxation rates. Two techniques are considered that are suitable for this case, in which Rabi oscillations are detected by monitoring the FID amplitude as a function of pulse duration or microwave field amplitude. We describe the FID-detected Rabi oscillations analytically or numerically for rectangular or shaped pulses, respectively. The description is confirmed by EPR experiments using DPPH as a model sample.

Measurement of fast neutron induced (n,γ) reaction cross-section of 68Zn, 96Zr, 121Sb and 123Sb in the energy range of 1 to 2 MeV.

The (n,γ) reaction cross-section for the elements 68Zn, 96Zr, 121Sb and 123Sb, present in the reactor structural/shielding materials, was measured by neutron activation technique in the neutron energy region of 1-2 MeV as very limited data is available in this energy range. Further, the neutron spectrum peaks in this energy region for the fast breeder reactors and proposed accelerator driven sub-critical systems. The natural strontium (natSr) element was used as a neutron flux monitor by considering effective combined reaction cross-section for 86Sr(n,γ)87Srm and 87Sr(n,n')87Srm reactions. The pellets of mixture of sample and monitor were irradiated by a quasi-mono energetic fast neutron beam, generated by 7Li(p,n)7Be reaction at FOTIA, Bhabha Atomic Research Centre, Mumbai, India. The activity of activation products was measured by off-line gamma-ray spectrometry using High Purity Germanium Detector (HPGe). The present data with improved uncertainty and covariance analysis enhance the cross-section data base for better constraining the evaluated data and theoretical models. The theoretical (n,γ) reaction cross-sections were calculated using TALYS 1.96, which could reasonably explain the present data with the Fermi gas level density prescription.

Tailoring the Li+ Intercalation Energy of Carbon Nanocage Anodes Via Atomic Al-Doping for High-Performance Lithium-Ion Batteries.

Graphitic carbon materials are widely used in lithium-ion batteries (LIBs) due to their stability and high conductivity. However, graphite anodes have low specific capacity and degrade over time, limiting their application. To meet advanced energy storage needs, high-performance graphitic carbon materials are required. Enhancing the electrochemical performance of carbon materials can be achieved through boron and nitrogen doping and incorporating 3D structures such as carbon nanocages (CNCs). In this study, aluminum (Al) is introduced into CNC lattices via chemical vapor deposition (CVD). The hollow structure of CNCs enables fast electrolyte penetration. Density functional theory (DFT) calculations show that Al doping lowers the intercalation energy of Li+. The Al-boron (B)-nitrogen (N-doped CNC (AlBN-CNC) anode demonstrates an ultrahigh rate capacity (≈300 mAh g-1 at 10 A g-1) and a prolonged fast-charging lifespan (862.82 mAh g-1 at 5 A g-1 after 1000 cycles), surpassing the N-doped or BN-doped CNCs. Al doping improves charging kinetics and structural stability. Surprisingly, AlBN-CNCs exhibit increased capacity upon cycling due to enlarged graphitic interlayer spacing. Characterization of graphitic nanostructures confirms that Al doping effectively tailors and enhances their electrochemical properties, providing a new strategy for high-capacity, fast-charging graphitic carbon anode materials for next-generation LIBs.

A dynamic approach for MR T2-weighted pelvic imaging.

OBJECTIVE: T2-weighted 2D fast spin echo sequence serves as the standard sequence in clinical pelvic MR imaging protocols. However, motion artifacts and blurring caused by peristalsis present significant challenges. Patient preparation such as administering antiperistaltic agents is often required before examination to reduce artifacts, which discomfort the patients. This work introduce a novel dynamic approach for T2 weighted pelvic imaging to address peristalsis-induced motion issue without any patient preparation. Approach: A rapid dynamic data acquisition strategy with complementary sampling trajectory is designed to enable highly undersampled motion-resistant data sampling, and an unrolling method based on deep equilibrium model is leveraged to reconstruct images from the dynamic sampled k-space data. Moreover, the fix-point convergence of the equilibrium model ensures the stability of the reconstruction. The high acceleration factor in each temporal phase, which is much higher than that in traditional static imaging, has the potential to effectively freeze pelvic motion, thereby transforming the imaging problem from conventional motion prevention or removal to motion reconstruction. Main results: Experiments on both retrospective and prospective data have demonstrated the superior performance of the proposed dynamic approach in reducing motion artifacts and accurately depicting structural details compared to standard static imaging. Significance: The proposed dynamic approach effectively captures motion states through dynamic data acquisition and deep learning-based reconstruction, addressing motion-related challenges in pelvic imaging.

Fast 3D 31P B 1 + mapping with a weighted stack of spiral trajectory at 7 T.

PURPOSE: Phosphorus MRS (31P MRS) enables noninvasive assessment of energy metabolism, yet its application is hindered by sensitivity limitations. To overcome this, often high magnetic fields are used, leading to challenges such as spatial B 1 + $$ {\mathrm{B}}_1^{+} $$ inhomogeneity and therefore the need for accurate flip-angle determination in accelerated acquisitions with short TRs. In response to these challenges, we propose a novel short TR and look-up table-based double-angle method for fast 3D 31P B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping (fDAM). METHODS: Our method incorporates 3D weighted stack-of-spiral gradient-echo acquisitions and a frequency-selective pulse to enable efficient B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping based on the phosphocreatine signal at 7 T. Protocols were optimized using simulations and validated through phantom experiments. The method was validated in the human brain using a 31P 1Ch-trasmit/32Ch-receive coil and skeletal muscle using a birdcage 1H/31P volume coil. RESULTS: The results of fDAM were compared with the classical DAM. A good correlation (r = 0.95) was obtained between the two B 1 + $$ {\mathrm{B}}_1^{+} $$ maps. A 3D 31P B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping in the human calf muscle was achieved in about 10:50 min using a birdcage volume coil, with a 20% extended coverage (number of voxels with SNR > 3) relative to that of the classical DAM (24 min). fDAM also enabled the first full-brain coverage 31P 3D B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping in approximately 10:15 min using a 1Ch-transmit/32Ch-receive coil. CONCLUSION: fDAM is an efficient method for 31P 3D B 1 + $$ {\mathrm{B}}_1^{+} $$ mapping, showing promise for future applications in rapid 31P MRSI.

Polyoxazolines with Cholesterol Lipid Anchor for Fast Intracellular Delivery.

Due to the increasing challenges posed by the growing immunity to poly(ethylene glycol) (PEG), there is growing interest in innovative polymer-based materials as viable alternatives. In this study, the advantages of lipids and polymers are combined to allow efficient and rapid cytoplasmic drug delivery. Specifically, poly(2-methyl-2-oxazoline) is modified with a cholesteryl hemisuccinate group as a lipid anchor (CHEMSPOx). The CHEMSPOx is additionally functionalized with a coumarin group (CHEMSPOx-coumarin). Both polymers self-assembled in water into vesicles of ≈100 nm and are successfully loaded with a hydrophobic model drug. The loaded vesicles reveal high cellular internalization across variant cell lines within 1 h at 37 °C as well as 4 °C, albeit to a lesser extent. A kinetic study confirms the fast internalization within 5 min after the sample's addition. Therefore, different internalization pathways are involved, e.g., active uptake but also nonenergy dependent mechanisms. CHEMSPOx and CHEMSPOx-coumarin further demonstrate excellent cyto-, hemo-, and membrane compatibility, as well as a membrane-protecting effect, which underlines their good safety profile for potential biological intravenous application. Overall, CHEMSPOx, as a lipopolyoxazoline, holds great potential for versatile biological applications such as fast and direct intracellular delivery or cellular lysis protection.

Multistage Linkage Internal Exclusion External Electrolyte Tactic Unlocks Extreme Fast Charge Lithium Metal Batteries.

Lithium metal batteries are booming because of their inherent preponderance, but a negative electric field from concentration dipolarization and slow solid-phase transfer at the electrode interface become blocking modules for extreme fast charging. Achieving an anion-rich solvation shell with a high dielectric constant (ε) is a feasible strategy to bootstrap an interface microenvironment for mass-transport reaction, but it is still an uncultivated field. Herein, the superposition, including the donor number values, the high ε, and the spatial potential resistance, are complementarily considered; we propose a low-cost electrolyte with an internal excluding external tactic to answer the above issue. Explanatorily, an optimized solvation shell follows the cascading exclusion relationship of nitrate ion (NO3-) → tetraglyme → ethylene carbonate → dimethyl carbonate. And the culminated bilayer structure establishes ideal conditions for Li+ transfer-reaction kinetics, of which an anion-rich internal shell facilitates solid-phase transport and a high-ε external shell slashes the negative electric field.

Electrospun gelatin/tea polyphenol@pullulan nanofibers for fast-dissolving antibacterial and antioxidant applications.

Bio-based active food packaging materials have a high market demand. We use coaxial electrospinning technology to prepare core-shell structured nanofibers with sustained antibacterial and antioxidant properties. The fiber core layer was composed of gelatin and tea polyphenols, whereas tea polyphenols provide antibacterial and antioxidant properties; the fiber sheath was composed of pullulan polysaccharides with antioxidant properties. By using a scanning electron microscope, it can be seen that the diameter distribution of the prepared nanofibers was uniform and the surface is smooth; using a transmission electron microscope, it can be clearly seen that the nanofibers have a core-shell structure; Fourier Transform Infrared and X-ray diffraction analysis indicate that the nanofibers have an amorphous structure; the 2,2-diphenyl-1-picrylhydrazyl free radical scavenging shows that nanofibers have higher antioxidant properties with the addition of tea polyphenols; antibacterial test showed that nanofibers had obvious inhibitory effect on the growth of Staphylococcus aureus and Escherichia coli; and the nanofiber film dissolution test shows that nanofibers can be used as fast soluble active packaging. Finally, core-sheath-structured nanofibers can serve as active packaging for instant food, possessing both rapid water solubility and excellent antibacterial and antioxidant activity, making water-soluble nanofibers interesting applications in the field of food packaging.

Insights into the Deterioration Mechanism of Charging Ability during Calendar Aging and Cycling Aging of High-Voltage Co-Poor NCM Cathode-Graphite Full Battery.

Lithium-ion battery (LIB) has gained significant recognition for the power cell market owing to its impressive energy density and appealing cost benefit. Among various cathodes, a high-voltage cobalt-poor lithium nickel manganese cobalt oxide cathode (Co-poor NCM cathode) has been considered as a promising strategy to enhance its energy density. Despite these advantages, high-voltage Co-poor NCM cathode-graphite full battery usually suffers from poor rate performance. However, fast charging has been a key indicator for widespread application of power batteries. Although many efforts have been made to improve the charging performance of fresh batteries, few works investigate the charging ability during calendar aging and cycling aging of high-voltage Co-poor NCM cathode-graphite full battery. In this work, we found that the charging ability becomes worse during calendar aging and cycling aging. Results showed that the increasing charge transfer resistance from the cathode is the major obstacle to achieving fast charging during the aging process. To address the problem, high-voltage Al2O3-coated Co-poor NCM cathode successfully prepared via a simple atomic layer deposition (ALD) method has been developed to reduce the decay of charging performance during calendar aging and cycling aging. Al2O3-coated NCM cathode can effectively reduce the growth rate of the resistance of cathode, which is benefiting from the conversion of Al2O3 into LiAlO2 with high ionic conductivity and the restriction formation of rock salt phase. Benefiting from the decreased charge transfer resistance of the NCM cathode, the mismatch of the lithium-ion reaction kinetics is well alleviated, thus effectively reducing the polarization under fast charging. As a result, Al2O3-coated NCM cathode-graphite full battery shows the slow deterioration of charging performance during the aging process. This work provides a promising strategy for constructing fast-charging batteries during calendar aging and cycling aging.

Enhancing the Functionalities of Personal Health Record Systems: Empirical Study Based on the HL7 Personal Health Record System Functional Model Release 1.

Background: The increasing demand for personal health record (PHR) systems is driven by individuals' desire to actively manage their health care. However, the limited functionality of current PHR systems has affected users' willingness to adopt them, leading to lower-than-expected usage rates. The HL7 (Health Level Seven) PHR System Functional Model (PHR-S FM) was proposed to address this issue, outlining all possible functionalities in PHR systems. Although the PHR-S FM provides a comprehensive theoretical framework, its practical effectiveness and applicability have not been fully explored. Objective: This study aimed to design and develop a tethered PHR prototype in accordance with the guidelines of the PHR-S FM. It sought to explore the feasibility of applying the PHR-S FM in PHR systems by comparing the prototype with the results of previous research. Methods: The PHR-S FM profile was defined to meet broad clinical data management requirements based on previous research. We designed and developed a PHR prototype as a web application using the Fast Healthcare Interoperability Resources R4 (FHIR) and Logical Observation Identifiers Names and Codes (LOINC) coding system for interoperability and data consistency. We validated the prototype using the Synthea dataset, which provided realistic synthetic medical records. In addition, we compared the results produced by the prototype with those of previous studies to evaluate the feasibility and implementation of the PHR-S FM framework. Results: The PHR prototype was developed based on the PHR-S FM profile. We verified its functionality by demonstrating its ability to synchronize data with the FHIR server, effectively managing and displaying various health data types. Validation using the Synthea dataset confirmed the prototype's accuracy, achieving 100% coverage across 1157 data items. A comparison with the findings of previous studies indicated the feasibility of implementing the PHR-S FM and highlighted areas for future research and improvements. Conclusions: The results of this study offer valuable insights into the potential for practical application and broad adoption of the PHR-S FM in real-world health care settings.

Resuscitation following trauma & role of trauma training programmes in emergency settings: A literature review & survey.

Background & objectives Traumatic injuries, especially in low- and middle- income countries (LMICs), present significant challenges in patient resuscitation and healthcare delivery. This study explores the role of trauma training programmes in improving patient outcomes and reducing preventable trauma-related deaths. Methods A dual approach was adopted, first a literature review of trauma training in LMICs over the past decade, along with a situational assessment survey. For the review of literature, we searched the PubMed database to identify key challenges and innovative practices in trauma training programmes in LMIC's. The survey, conducted among healthcare professionals in various LMICs, collected direct insights into the challenges and the status of trauma training programmes in these countries. Results The literature review analysed 68 articles, with a significant focus on the African subcontinent (36 studies), underscoring the region's emphasis on research on trauma training programmes. These studies mainly targeted physicians, clinicians, postgraduate trainees in surgical or anaesthesia fields and medical students (86.8%), highlighting innovations like simulation-based training and the cascading training model. In our survey, we received 34 responses from healthcare professionals in India, Belarus, Azerbaijan, Nepal and Pakistan. Around 52.9 per cent reported the absence of established trauma training programmes in their settings. The majority of respondents advocated for hands-on, simulation-based training (94.1%) and emphasised the need for structured training programmes (85.3%), feedback sessions (70.6%) and updated protocols (61.8%). This combined data underlined the critical gaps and potential improvements in trauma training programmes and resuscitation practices in LMICs. Interpretation & conclusions Effective trauma care in LMICs requires the establishment of comprehensive, tailored training programmes. Key interventions should include subsidization of pre-existing trauma courses and the adoption of World Health Organization Guidelines for essential trauma care, implementation of trauma quality improvement and review processes and the incorporation of focused assessment with sonography in trauma (FAST) in emergency departments. These steps are crucial for equipping healthcare workers with vital skills and knowledge, fostering a culture of continuous learning and improvement in the realm of trauma care.

Nanofibrous Covalent Organic Frameworks as the Cathode, Separator, and Anode for Batteries with High Energy Density and Ultrafast-Charging Performance.

To meet the demand for longer driving ranges and shorter charging times of power equipment in electric vehicles, engineering fast-charging batteries with exceptional capacity and extended lifespan is highly desired. In this work, we have developed a stable ultrafast-charging and high-energy-density all-nanofibrous covalent organic framework (COF) battery (ANCB) by designing a series of imine-based nanofibrous COFs for the cathode, separator, and anode by Schiff-base reactions. Hierarchical porous structures enabled by nanofibrous COFs were constructed for enhanced kinetics. Rational chemical structures have been designed for the cathode, separator, and anode materials, respectively. A nanofibrous COF (AA-COF) with bipolarization active sites and a wider layer spacing has been designed using a triphenylamine group for the cathode to achieve high voltage limits with fast mass transport. For the anode, a nanofibrous COF (TT-COF) with abundant polar groups, active sites, and homogenized Li+ flux based on imine, triazine, and benzene has been synthesized to ensure stable fast-charging performance. As for the separator, a COF-based electrospun polyacrylonitrile (PAN) composite nanofibrous separator (BB-COF/PAN) with hierarchical pores and high-temperature stability has been prepared to take up more electrolyte, promote mass transport, and enable as high-temperature operation as possible. The as-assembled ANCB delivers a high energy density of 517 Wh kg-1, a high power density of 9771 W kg-1 with only 56 s of ultrafast-charging time, and high-temperature operational potential, accompanied by a 0.56% capacity fading rate per cycle at 5 A g-1 and 100 °C. This ANCB features an ultralong lifespan and distinguished ultrafast-charging performance, making it a promising candidate for powering equipment in electric vehicles.

Element Screening Engineering for High-Entropy Alloy Anodes: Achieving Fast and Robust Li-Storage With Optimal Working Potential.

While the high-entropy strategy is highly effective in enhancing the performance of materials across various fields, an optimal methodology for selecting component elements for performance optimization is still lacking. Here the findings on uncovering the element selection rules for rational design of high-entropy alloy anodes with exceptional lithium storage performance are reported. It is investigated high-entropy element screening rules by modifying stable diamond-structured Ge with P to induce a tetrahedrally coordinated sphalerite structure for enhanced metallic conductivity, further stabilized by incorporating Zn and other elements. Moreover, both theoretical and experimental results confirm that Li-storage performance improves with increasing atomic number: BZnGeP3 < AlZnGeP3 < GaZnGeP3 < InZnGeP3. InZnGeP3-based electrodes demonstrate the highest Li-ion affinity, fastest electronic and Li-ion transport, largest Li-storage capacity and reversibility, and best mechanical integrity. Further element screening based on the above criteria leads to high entropy alloy anodes with metallic conductivity like GaCuSnInZnGeP6, GaCu(or Sn)InZnGeP5, CuSnInZnGeP5, InZnGePSeS(or Te), InZnGeP2S(or Se) which show superior Li-storage performances. The excellent phase stability is attributed to their high configurational entropy. This study offers profound insights into element screening for high-entropy alloy-based anodes in Li-ion batteries, providing guidance and reference for the element combination and screening of other high-entropy functional materials.

Boosting Fast Charging of Lithium-Metal Batteries via Weak Interactions Between Non-Solvating Solvents and Anions in High-Safety Eutectic Electrolytes.

Proper design of the solvation structure is crucial for the development of lithium metal batteries (LMBs). In this paper, the use of 1,2-Dimethoxyethane (DME) as a non-solvating cosolvent in amide-based eutectic electrolytes is proposed to address challenges related to high viscosity, high polarization, and low conductivity, thus enhancing the compatibility with lithium metal anodes. Through physical characterization combined with simulation calculations the existence of a weak interaction between DME and anions is confirmed, which promotes the dissociation of lithium salts and increases the Li+ transference number and diffusion coefficient, thus improving the fast charging performance of eutectic electrolytes. In addition, stable SEI layer enriched with inorganic components is formed during the cycling process, resulting in uniform and dense lithium deposition. The fast charging performance of the cell can be effectively improved by utilizing the interaction between anions and solvents. The LiFePO4 (LFP)||Li cell has a capacity retention of 97% after 1200 cycles at 5 C and also performs well at high temperature of 50 °C. Overall, the use of a non-solvating cosolvent in eutectic electrolytes presents a promising and innovative approach for enhancing electrolyte performance in LMBs.

Water-Rewritable Structural Color Textiles with Fast Response Speed and Antispreading Capability.

The stimuli-responsive textiles, especially water-responsive textiles, have garnered attention owing to their environmental compatibility. Inspired by the hydrochromic behavior of Diphylleia grayi, water-rewritable structural color (WRSC) textiles exhibiting fast response speed and antispreading capability were fabricated by spraying hollow SiO2 (H-SiO2) microspheres and poly(trifluoroethyl methacrylate-butyl acrylate) [P(TFEMA-BA)]. The water-written textiles exhibited structural color changes in 0.6 s via an increase in the refractive index, driven by water penetrating the gaps between H-SiO2 microspheres. The structural color was restored to the initial state after the water evaporated, allowing multiple cycles of the write-erase-write mode. The hydrophobic P(TFEMA-BA) adhesive was used to construct a stable chromogenic array and endow WRSC textiles with antispreading properties, thereby improving structural stability and achieving clear writing patterns. The prepared WRSC textiles demonstrated high flexibility, structural stability, and water-rewritable properties, providing advanced bionic inspiration and valuable design ideas for rewritable materials and smart textiles.

Effect of neutron beam properties on dose distributions in a water phantom for boron neutron capture therapy.

From the viewpoints of the advantage depths (ADs), peak tumor dose and skin dose, we evaluated the effect on the dose distribution of neutron beam properties, namely the ratio between thermal and epithermal neutron fluxes (thermal/epithermal ratio), fast neutron component and γ-ray component. Several parameter surveys were conducted with respect to the beam properties of neutron sources for boron neutron capture therapy assuming boronophenylalanine as the boron agent using our dose calculation tool, called SiDE. The ADs decreased by 3% at a thermal/epithermal ratio of 20-30% compared with the current recommendation of 5%. The skin dose increased with the increasing thermal/epithermal ratio, reaching a restricted value of 14 Gyeq at a thermal/epithermal ratio of 48%. The fast neutron component was modified using two different models, namely the 'linear model', in which the fast neutron intensity decreases log-linearly with the increasing neutron energy, and the 'moderator thickness (MT) model', in which the fast neutron component is varied by adjusting the MT in a virtual beam shaping assembly. Although a higher fast neutron component indicated a higher skin dose, the increment was <10% at a fast neutron component of <1 × 10-12 Gy cm2 for both models. Furthermore, in the MT model, the epithermal neutron intensity at a fast neutron component of 6.8 × 10-13 Gy cm2 was 41% higher compared with that of 2 × 10-13 Gy cm2. The γ-ray component also caused no significant disadvantages up to several times larger compared with the current recommendation.

Silver Telluride Colloidal Quantum Dot Solid for Fast Extended Shortwave Infrared Photodetector.

Extended shortwave infrared (eSWIR) photodetectors that employ solution-processable semiconductors have attracted attention for use in applications such as ranging, night vision, and gas detection. Colloidal quantum dots (CQDs) are promising materials with facile bandgap tunability across the visible-to-mid-infrared wavelengths. However, toxic elements, such as Hg and Pb, and the slow response time of CQD-based IR photodetectors, limit their commercial viability. This article presents a novel eSWIR photodetector that is fabricated using silver telluride (Ag2Te) CQDs. Effective thiolate ligand exchange enables a lower trap density and improved carrier mobility in CQD solids. Furthermore, a vertical p-n photodiode architecture with a favorable energy-level landscape is utilized to facilitate charge extraction, resulting in a fast, room-temperature-operable, and toxic-element-free CQD photodetector. The best eSWIR Ag2Te CQD photodetector exhibits a fall time of 72 ns, representing the fastest response time among all prior CQD-based eSWIR photodetectors, including those containing toxic elements, such as Pb and Hg.

Engineering intervention to disrupt the evolution of ZIF-67: Ultra-fast synthesis of arrayed Co(OH)2@ZIF-L in dozens of seconds for high-energy charge storage.

Designing rational heterostructures of high-performance electroactive materials on conductive substrates with hierarchical structures is critical for advancing electrochemical energy storage technologies. In this study, a unique spatial structure is fabricated by vertically aligning two-dimensional (2D) structures of Co-ZIF-L on conductive nickel foam (NF) substrate through interruption of ZIF-67 formation. This is followed by an innovative electrochemical synthesis method that disrupts unstable surface coordination bonds in Co-ZIF-L, enabling the in-situ generation of Co(OH)2. The resulting Co(OH)2@ZIF-L/NF binder-free electrodes feature a hierarchical spatial structure and are synthesized in approximately 30 s. These electrodes showcase exceptional area capacity of 3.1 C cm-2 at 1 mA cm-2, attributed to their high specific surface area and layered architecture that promotes electrolyte penetration. Density Functional Theory (DFT) calculations reveal that the Co(OH)2@ZIF-L nanostructures have superior electrical conductivity compared to the individual components. Furthermore, a hybrid supercapacitor (HSC) based on Co(OH)2@ZIF-L/NF//AC exhibits an impressive energy density of 42 Wh kg-1 at a power density of 184.7 W kg-1. This research provides new insights into the efficient synthesis of high-performance electroactive materials with unique spatial structures and expands the potential applications of ZIF materials.