ABSTRACT
An accurate measurement of the amount fraction of hydrogen in gas mixtures is mandatory for practical applications, requiring methods that are fast, continuous, robust, and cost-effective. This study compares the performance of Raman and benchtop NMR process spectroscopy for determining the hydrogen amount fraction in gas mixtures. A setup was designed to integrate both techniques, enabling measurements of the same sample. Tests were conducted with gravimetrically prepared gas mixtures of reference quality ranging from 1.20 cmol/mol to 85.83 cmol/mol of hydrogen. The results demonstrate that Raman spectroscopy provides superior performance, with a minimal root mean square error (RMSE) of 0.22 cmol/mol and excellent linearity. In contrast, benchtop NMR spectroscopy faced challenges, such as overlapping peaks and longer measurement times, resulting in a higher RMSE of 0.71 cmol/mol. Raman spectroscopy proves to be particularly well-suited for practical applications due to its high accuracy and linearity. Meanwhile, benchtop NMR spectroscopy holds potential for future enhancements through ongoing technological advances, such as higher magnetic field strengths. In summary, the results from our study indicate that Raman spectroscopy is already a serviceable method for precise hydrogen quantification, whereas benchtop NMR spectroscopy can be attributed potential for future applications.
ABSTRACT
The adhesion of H2 bubbles on the electrode surface is one of the main factors limiting the performance of H2 evolution of electrolytic water, especially at high current density. To overcome this problem, here a "quasi-gas phase" electrolytic water reaction system based on capillary effect is proposed for the first time to improve the mass transfer efficiency of H2. The typical feature of this reaction system is that the main site of H2 evolution reaction is transferred from the bulk aqueous solution to the gas phase environment above the bulk aqueous solution, thus effectively inhibiting the aggregation of H2 bubbles and reducing the resistance of their diffusion away. Electrochemical test results show that the proposed quasi-gas phase system can significantly reduce the potential required in H2 evolution reaction process at high current density compared with the conventional electrolytic reaction system. Specifically, the overpotential potential is reduced by 0.31 V when the H2 evolution current density of 250 mA cm-2 is achieved.
ABSTRACT
Particulate nitrate is an important component of particulate matter and poses a significant threat to the ecosystem and human health. The gas-phase formation pathway of nitrate is extremely important, which mainly comprises the NO2 oxidation process triggered by OH radicals and the nitrate partitioning process. The response of nitrate to source emission reduction during different pollution periods remains unclear. Here, we applied the chemical kinetic and thermodynamics model to explore the importance oxidation process and partitioning process during different pollution periods based on high-time resolution observation data. The result indicated that with the aggravation of pollution, the partitioning process gradually ceases to be a limiting step in the formation of nitrates. The results of the influencing factor analysis indicate that NO2 concentration and aerosol pH values play a more significant role in the formation of nitrates. Specifically, during the clean period, nitrate formation is sensitive to both NO2 concentration and pH values, but during the pollution period, it becomes sensitive only to NO2 concentration. By combining source apportionment, we explored the response of nitrate formation to source emission reduction, and the results showed that the control of vehicle exhaust emissions and coal combustion sources is more effective in mitigating nitrate pollution. Additionally, this study also emphasized the importance of early prevention and control of pollution sources. This research provides scientific evidence for the precise management and control of nitrates.
ABSTRACT
The kinetics of the F2 reaction with thiirane (C2H4S) was studied for the first time in a flow reactor combined with mass spectrometry at a total helium pressure of 2 Torr and in the temperature range of 220 to 800 K. The rate constant of the title reaction was determined under pseudo-first-order conditions, either monitoring the kinetics of F2 or C2H4S consumption in excess of thiirane or of F2, respectively: k1 = (5.79 ± 0.17) × 10-12 exp(-(16 ± 10)/T) cm3 molecule-1 s-1 (the uncertainties represent precision of the fit at the 2σ level, with the total 2σ relative uncertainty, including statistical and systematic errors on the rate constant being 15% at all temperatures). HF and CH2CHSF were identified as primary products of the title reaction. The yield of HF was measured to be 100% (with an accuracy of 10%) across the entire temperature range of the study. Quantum computations revealed reaction enthalpies ranging from -409.9 to -509.1 kJ mol-1 for all the isomers/conformers of the products, indicating a strong exothermicity. Boltzmann relative populations were then established for different temperatures.
ABSTRACT
Structure, stability, electronic structure, spectroscopy and chemical bonding properties of a fluorine atom doped gas-phase small to medium-sized magnesium clusters, FMgn (n = 2-20), systematically investigated by CALYPSO software together with density functional theory (DFT). Structural calculations showed that FMgn has a structural diversity which is rarely reported in other magnesium-based clusters before. F atoms were always located in the outer layer of the Mgn host clusters and only two or three Mg atoms surround it. FMg18 was revealed to be supposed to have robust relative stability. Charge transfer and density of states were calculated for analyzing the electronic structure characteristics. Theoretical calculations of IR, Raman and UV-Vis spectra were computed to provide data guidelines for future experimental observations. Finally, the F-Mg and Mg-Mg chemical bonds of the FMgn clusters were analyzed, including the critical bonding points (BCPs) of Laplacian of electron density (Δρ), electron localization function (ELF) and interaction region indicator (IRI). The kind and strength of chemical bonds reveal the mechanism by which the F atom was rapidly stabilized by Mgn (n = 2-20) host clusters.
ABSTRACT
This study presents a bidirectional flow tidal bioreactor designed to enhance H2-driven CO2 biomethanation. The bioreactor alternated biofilms between immersion in nutrient solution and exposure to H2/CO2, creating alternating dry and wet states. This tidal operation minimized liquid film thickness during dry periods and ensured uniform nutrient distribution during wet periods. Bidirectional H2/CO2 supply was used to reduce biofilm thickness heterogeneity across the reactor height. CO2 biomethanation remained stable with an empty bed residence time of 9.7 min, achieving a methane (CH4) formation rate of 26.8 Nm3 CH4/(m3·d). The product gas contained 95.0 ± 2.5 % CH4, with a H2/CO2 conversion efficiency of 90.8 %. Tidal operation mitigated the buildup of dissolved and suspended organics, such as organic acids and detached biofilms. Dominant bacteria in biofilms included fermentative species like Petrimonas and H2-utilizing homoacetogens like Sporomusa. Enriched hydrogenotrophic methanogens, particularly Methanobacterium, were observed. Overall, this study highlights the bioreactor's effectiveness in improving CO2 biomethanation.
Subject(s)
Biofilms , Bioreactors , Carbon Dioxide , Hydrogen , Methane , Carbon Dioxide/metabolism , Methane/metabolism , Hydrogen/metabolism , Bacteria/metabolismABSTRACT
In atmospheric pressure chemical ionization mass spectrometry (APCI-MS), [M-3H+H2O]+ ions can deliver analyte-specific signals that enable direct analysis of volatile n-alkane mixtures. The underlying ionization mechanisms have been the subject of open debate, and in particular the role of water is insufficiently clarified to allow for reliable process analytics when the humidity level changes over time. This can be a problem, particularly in online monitoring, where analyte accumulation in the ion source can also occur. Here, we investigated the role of water during APCI-MS of volatile n-alkanes by changing the carrier gas for sample injection from a dry to a wetted state as well as by using 18O-labeled water. This allowed for a distinction between gaseous and surface-adsorbed water molecules. While adsorbed water seems to be responsible for the desired [M-3H+H2O]+ signals through surface reactions with the analyte molecules, gaseous water was found to promote the formation of CnH2n+1O+ of different (and analyte-independent) hydrocarbons, revealing a reaction with hydrocarbon species which accumulated in the ion source during continuous operation. At the same time, gaseous water competed with analyte molecules for ionization and thus suppressed the formation of alkyl (CnH2n+1+) and alkenyl (CnH2n-1+) ions. The results reveal a memory effect due to hydrocarbon adsorption, which may cause severe interpretation difficulties when the ionization chamber undergoes sudden humidity changes. The use of [M-3H+H2O]+ for n-alkane analysis in alkane/water mixtures can be facilitated by constantly maintaining high humidity and hence stabilizing the ionization conditions.
ABSTRACT
For fractured gas reservoirs with strong water drive, gas phase trapping affects the gas recovery significantly. The recovery may be less than 50% for some reservoirs while it is only 12% for Beaver River gas field. The gas phase trapping mechanism has been revealed by the results of depletion experimental test. The residual pressure of the trapped gas is as high as 11.75 MPa with a 12.8 cm imbibition layer resulting in gas recovery deceased 49.5% compared with that without imbibition layer. A mathematical model is built to calculate the imbibition thickness based on capillary pressure and relative permeability of the matrix. The gas phase trapping are analyzed by two representative wells in Weiyuan gas field, the intermittent production reinforces the imbibition thickness and result in gas trapped in the matrix block with high residual pressure for the low performace gas wells, the extremely low gas recovery can be explained more rationally. That lays a foundation of improving the gas recovery for fractured reservoirs.
ABSTRACT
Calcium oxide (CaO), utilized in semi-dry/dry desulfurization systems at municipal solid waste incineration (MSWI) plants, demonstrates some capability to remove polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study assessed the gas-phase PCDD/F removal performance of CaO, activated carbon (AC) and CaO-AC mixtures. Alone, CaO achieved removal efficiencies of only 31.9% for mass and 50.8% for I-TEQ concentration. However, CaO-AC mixtures exhibited significantly higher efficiencies, reaching 96.0% and 92.5% for mass and I-TEQ concentrations, respectively, surpassing those of AC alone, which were 74.7% and 58.5%. BET analysis indicated that CaO's limited surface area and pore structure are major constraints on its adsorption performance. Density functional theory (DFT) calculations revealed that the π-π electron donor-acceptor (EDA) interaction enhances the adsorption between AC and PCDD/F, with adsorption energies ranging from -1.02 to -1.24 eV. Additionally, the induced dipole interactions between CaO and PCDD/F contribute to adsorption energies ranging from -1.13 to -1.43 eV. Moreover, with increasing chlorination levels, PCDD/F molecules are more predisposed to accept electron transfers from the surfaces of AC or CaO, thereby facilitating adsorption. The calculation for mixed AC and CaO showed that CaO modifies AC's properties, enhancing its ability to adsorb gas phase PCDD/Fs, with the higher adsorption energy and more electrons transfer, aligning with gas phase PCDD/Fs adsorption experiments. This study provides a comprehensive understanding of how CaO influences the PCDD/F adsorption performance of AC.
ABSTRACT
Various techniques are available to illuminate geometric structures of molecular ions in gas phase, such as Förster Resonance Energy Transfer (FRET) informing on distances between two dyes covalently attached to a molecule. Typically, cationic rhodamines, which absorb and emit visible light, are used for labeling. Extensive work has revealed that the transition energy of a rhodamine is intricately linked to its nearby microenvironment, with nearby charges causing Stark-shifted emission. This occurs because the inter-dye Coulomb interaction is weaker in the excited state (S1) than in the ground state (S0) due to the increase in polarizability upon excitation. Therefore, absorption and emission spectra, along with FRET efficiencies, provide insights into structural motifs. At room temperature, multiple conformers often co-exist, leading to overlapping absorption bands among different conformers and broad spectra. To study specific conformers, it is necessary to isolate them, for example, using ion-mobility spectrometry. Another approach is to reduce temperature, which results in spectral narrowing and distinct absorption bands, allowing for the selection of specific conformers through selective excitation. Here, we describe the instrumentation used for cryogenically cold FRET experiments and discuss recent results for small model systems, as well as future directions for a technique still in its infancy.
ABSTRACT
The notorious tumor microenvironment (TME) usually becomes more deteriorative during phototherapeutic progress that hampers the antitumor efficacy. To overcome this issue, we herein report the ameliorative and adaptive nanoparticles (TPASIC-PFH@PLGA NPs) that simultaneously reverse hypoxia TME and switch photoactivities from photothermal-dominated state to photodynamic-dominated state to maximize phototherapeutic effect. TPASIC-PFH@PLGA NPs are designed by incorporating oxygen-rich liquid perfluorohexane (PFH) into the intraparticle microenvironment to regulate the intramolecular motions of AIE photosensitizer TPASIC. TPASIC exhibits a unique aggregation-enhanced reactive oxygen species (ROS) generation feature. PFH incorporation affords TPASIC the initially dispersed state, thus promoting active intramolecular motions and photothermal conversion efficiency. While PFH volatilization leads to nanoparticle collapse and the formation of tight TPASIC aggregates with largely enhanced ROS generation efficiency. As a consequence, PFH incorporation not only currently promotes both photothermal and photodynamic efficacies of TPASIC and increases the intratumoral oxygen level, but also enables the smart photothermal-to-photodynamic switch to maximize the phototherapeutic performance. The integration of PFH and AIE photosensitizer eventually delivers more excellent antitumor effect over conventional phototherapeutic agents with fixed photothermal and photodynamic efficacies. This study proposes a new nanoengineering strategy to ameliorate TME and adapt the treatment modality to fit the changed TME for advanced antitumor applications.
ABSTRACT
This article shows that the gas-phase entropy of molecules is proportional to the area of the molecules, with corrections for the different curvatures of the molecular surface. The ability to estimate gas-phase entropy by the area law also allows us to calculate molecular entropy faster and more accurately than currently popular methods of estimating molecular entropy with harmonic oscillator approximation. The speed and accuracy of our method will open up new possibilities for the explicit inclusion of entropy in various computational biology methods.
ABSTRACT
This study described the quality detection and rapid identification of frying oil waste points based on gas chromatography-ion mobility spectrometry (GC-IMS). A total of 48 volatile substances were identified, among which the levels of 11 components, including 2-pentylfuran, 2-butylfuran, and 2-hexanone, increased with prolonged frying time after 40 h in cottonseed oil. Conversely, the levels of hexanal, heptanal, and E,E-2,4-heptadienal decreased as frying time extended. Correlation analysis revealed a significant association between volatile substances of the oil and acid value (p < 0.05) and polar components with volatile substances (p < 0.05). Furthermore, significant differences in the types and contents of flavor substances were observed in cottonseed oil at different frying times (including before and after reaching the discard point) (p < 0.05). Subsequently, principal component analysis (PCA) results clearly showed that the cottonseed oil samples at different frying times were well distinguished by the volatile compounds; moreover, discriminant model analysis indicated a model accuracy rate of 100%. These results showed the potential of GC-IMS-based approaches in discriminating the waste points of frying oil.
Subject(s)
Ion Mobility Spectrometry , Volatile Organic Compounds , Ion Mobility Spectrometry/methods , Volatile Organic Compounds/analysis , Volatile Organic Compounds/chemistry , Gas Chromatography-Mass Spectrometry/methods , Principal Component Analysis , Cooking , Cottonseed Oil/chemistry , Hot TemperatureABSTRACT
Manganese ion homeostasis is vital for bacteria and is achieved via manganese-dependent transcription factors. Manganese mediation of transcription factor attachment to the corresponding oligonucleotide sequences can be investigated, e.g. via electrophoretic mobility shift assays (EMSA). Formation of specific biocomplexes leads to differences in the migration pattern upon gel electrophoresis. Focusing on electrophoresis in the gas-phase, applying a nano electrospray gas-phase electrophoretic mobility molecular analyzer (nES GEMMA) also known as nES differential mobility analyzer (nES DMA), and on transcription factors (MntR proteins) from Bacillus subtilis and Mycobacterium tuberculosis, we took interest in the gas-phase electrophoresis of the corresponding biospecific complexes. We compared nES GEMMA, separating analytes in the nanometer regime (a few to several hundred nm in diameter) in the gas-phase in their native state according to particle size, to EMSA data. Indeed we were able to demonstrate manganese-mediated attachment of MntR to target genomic sequences with both analytical techniques. Despite some inherent pitfalls of the nES GEMMA method like analyte/instrument surface interactions, we were able to detect the target complexes. Moreover, we were able to calculate the molecular weight (MW) of the obtained species by application of a correlation function based on nES GEMMA obtained data. As gas-phase electrophoresis also offers the possibility of offline hyphenation to orthogonal analysis techniques, we are confident that nES GEMMA measurements are not just complementary to EMSA, but will offer the possibility of further in-depth characterization of biocomplexes in the future.
ABSTRACT
Gardenia fruit is a popular functional food and raw material for natural pigments. It comes from a wide range of sources, and different products sharing the same name are very common. Volatile organic compounds (VOCs) are important factors that affect the flavor and quality of gardenia fruit. This study used the Heracles NEO ultra-fast gas phase electronic nose with advanced odor analysis performance and high sensitivity to analyze six batches of gardenia fruit from different sources. This study analyzed the VOCs to find a way to quickly identify gardenia fruit. The results show that this method can accurately distinguish the odor characteristics of various gardenia fruit samples. The VOCs in gardenia fruit are mainly organic acid esters, ketones, and aldehyde compounds. By combining principal component analysis (PCA) and discriminant factor analysis (DFA), this study found that the hexanal content varied the most in different gardenia fruit samples. The VOCs allowed for the fruit samples to be grouped into two main categories. One fruit sample was quite different from the fruits of other origins. The results provide theoretical support for feasibility of rapid identification and quality control of gardenia fruit and related products in the future.
ABSTRACT
2-Bromo-1-(3,3-dinitroazetidin-1-yl)ethan-1-one (RRx-001) is a hypoxic cell chemotherapeutics with already demonstrated synergism in combined chemo-radiation therapy. The interaction of the compound with secondary low-energy electrons formed in large amounts during the physico-chemical phase of the irradiation may lead to these synergistic effects. The present study focuses on the first step of RRx-001 interaction with low-energy electrons in which a transient anion is formed and fragmented. Combination of two experiments allows us to disentangle the decay of the RRx-001 anion on different timescales. Sole presence of the electron initiates rapid dissociation of NO2 and HNO2 neutrals while NO2- and Br- anions are produced both directly and via intermediate complexes. Based on our quantum chemical calculations, we propose that bidirectional intersystem crossing between π*(NO2) and σ*(C-Br) states explains the experimental spectra. The fast dynamics monitored will impact the condensed phase chemistry of the anion as well.
ABSTRACT
Protein cysteine S-glycosylation is a relatively rare and less well characterized post-translational modification (PTM). Creating reliable model proteins that carry this modification is challenging. The lack of available models or natural S-glycosylated proteins significantly hampers the development of mass-spectrometry-based (MS-based) methodologies for detecting protein cysteine S-glycosylation in real-world proteomic studies. There is also limited MS-sequencing data describing it as easier to create synthetic S-glycopeptides. Here, we present the results of an in-depth manual analysis of automatically annotated CID/HCD spectra for model S-glucopeptides. The CID spectra show a long series of y/b-fragment ions with retained S-glucosylation, regardless of the dominant m/z signals corresponding to neutral loss of 1,2-anhydroglucose from the precursor ions. In addition, the spectra show signals manifesting glucosyl transfer from the cysteine position onto lysine, arginine (Lys, Arg) side chains, and a peptide N-terminus. Other spectral evidence indicates that the N-glucosylated initial products of transfer are converted into N-fructosylated (i.e., glycated) structures due to Amadori rearrangement. We discuss the peculiar transfer of the glucose oxocarbenium ion (Glc+) to positively charged guanidinium residue (ArgH+) and propose a mechanism for the gas-phase Amadori rearrangement involving a 1,2-hydride ion shift.
Subject(s)
Cysteine , Glycosylation , Cysteine/chemistry , Cysteine/metabolism , Protein Processing, Post-Translational , Glycopeptides/chemistry , Glycopeptides/metabolism , Peptides/chemistry , Peptides/metabolism , Gases/metabolism , Gases/chemistry , Glucose/metabolism , Glucose/chemistry , Proteomics/methods , Tandem Mass Spectrometry/methodsABSTRACT
Improving the removal effect of selenium in wet flue gas desulfurization system is a key way to reduce the emission of selenium pollutants from coal-fired power plants. In order to clarify the removal mechanism of selenium pollutants in the desulfurization tower, it is necessary to obtain accurate selenium gas-phase diffusion coefficient. In this paper, molecular dynamics simulations were used to carry out theoretical calculations of gas-phase diffusion coefficients of SeO2 (the main form of selenium in coal combustion flue gas). The gas-phase diffusion coefficients of SeO2 in the range of 393 K-433 K were measured by a self-developed heavy metal gas diffusion coefficient testing device to verify the accuracy of the molecular dynamics calculations. Furthermore, the calculated gas-phase diffusion coefficients of SeO2 under typical binary and ternary components were obtained by correcting on the basis of Fuller's formula. Finally, a single-droplet absorption model for SeO2 was constructed and experiments were carried out to compare the effect of the gas-phase diffusion coefficient on the accuracy of the model calculations. The error of the model calculations was reduced from 8.09 % to 1.96 % after the correction. In this study, the gas-phase diffusion coefficient of SeO2 in the low-temperature range of coal-fired flue gas was obtained. This study can provide basic data for the development of selenium migration mechanism and control technology.
ABSTRACT
The differentially pumped rare-gas filter at the end of the VUV beamline of the Swiss Light Source has been adapted to house a windowless absorption cell for gases. Absorption spectra can be recorded from 7â eV to up to 21â eV photon energies routinely, as shown by a new water and nitrous oxide absorption spectrum. By and large, the spectra agree with previously published ones both in terms of resonance energies and absorption cross sections, but that of N2O exhibits a small shift in the {\tilde{\bf D}} band and tentative fine structures that have not yet been fully described. This setup will facilitate the measurement of absorption spectra in the VUV above the absorption edge of LiF and MgF2 windows. It will also allow us to carry out condensed-phase measurements on thin liquid sheets and solid films. Further development options are discussed, including the recording of temperature-dependent absorption spectra, a stationary gas cell for calibration measurements, and the improvement of the photon energy resolution.
ABSTRACT
Manganese complexes exhibit a rich redox chemistry, usually accompanied by structural reorganization during the redox processes often followed by ligand dissociation or association. The push-pull ligand 2,6-diguanidylpyridine (dgpy) stabilizes manganese in the oxidation states +II, +III, and + IV in the complexes [Mn(dgpy)2]n+ (n = 2-4) without change in the coordination sphere in the condensed phase [Heinze et al., Inorganic Chemistry, 2022, 61, 14616]. In the condensed phase, the manganese(IV) complex is a very strong oxidant. In the present work, we investigate the stability and redox activity of the MnIV complex and its counterion (PF6-) adducts in the gas phase, using two modified 3D Paul ion trap mass spectrometers. Six different cationic species of the type [Mnx(dgpy)2(PF6)y]n+ (x = II, III, IV, y = 0-3, n = 1-3) could be observed for the three oxidation states MnIV, MnIII, and MnII, of which one observed complex also contains a reduced dgpy ligand. MnII species showed the highest relative stability in collision induced dissociation and UV/vis photo dissociation experiments. The lowest stability is observed in the presence of one or more counterions, which correlates to a lower total charge n+. Gas phase UV/vis spectra show similar features as the condensed phase spectra only differing in relative band intensities. The strongly oxidizing MnIV complex reacts with triethylamine (NEt3) in the gas phase to give MnIII, while MnIII species show little reactivity toward NEt3.