A multicommuted system using bacterial cellulose for urease immobilization and copper (II)-MOF colorimetric sensor for urea spectrophotometric determination in milk.

This work describes determining urea in milk samples using a multicommuted approach with a urease enzyme immobilized in bacterial cellulose and solid MOF as a colorimetric reagent. The Cu(2+)-MOF was characterized by FTIR spectroscopy, XRD, and SEM. The urea quantification was based on the urea hydrolysis reaction catalyzed by urease and reacted with Cu(2+)-MOF forming [Cu(NH3)4]2+, monitored at 450 nm. Linear responses were obtained from 1.0 to 50.0 mg dL-1 urea (R = 0.9959, n = 11), detection and quantitation limits of 0.082 mg dL-1 and 0.272 mg dL-1 respectively, analytical frequency of 8 determinations per hour, 0.8 mL sample solution consumption. Potential interfering studies have shown the selectivity of the proposed method. Addition and recovery tests were performed obtaining variation from 90 to 103%. Applying the F-test and t-test, the results showed no significant difference at the 95% confidence level Comparing the proposed and the reference method.

Low-Valent Metals in Metal-Organic Frameworks Via Post-Synthetic Modification.

Metal-organic frameworks (MOFs) provide uniquely tunable, periodic platforms for site-isolation of reactive low-valent metal complexes of relevance in modern catalysis, adsorptive applications, and fundamental structural studies. Strategies for integrating such species in MOFs include post-synthetic metalation, encapsulation and direct synthesis using low-valent organometallic complexes as building blocks. These approaches have each proven effective in enhancing catalytic activity, modulating product distributions (i.e., by improving catalytic selectivity), and providing valuable mechanistic insights. In this minireview, we explore these different strategies, as applied to isolate low-valent species within MOFs, with a particular focus on examples that leverage the unique crystallinity, permanent porosity and chemical mutability of MOFs to achieve deep structural insights that lead to new paradigms in the field of hybrid catalysis.

Recent progress and perspectives of metal organic frameworks (MOFs) for the detection of food contaminants.

Over the past decades, increasing research in metal-organic frameworks (MOFs) being a large family of highly tunable porous materials with intrinsic physical properties, show propitious results for a wide range of applications in adsorption, separation, electrocatalysis, and electrochemical sensors. MOFs have received substantial attention in electrochemical sensors owing to their large surface area, active metal sites, high chemical and thermal stability, and tunable structure with adjustable pore diameters. Benefiting from the superior properties, MOFs and MOF-derived carbon materials act as promising electrode material for the detection of food contaminants. Although several reviews have been reported based on MOF and its nanocomposites for the detection of food contaminants using various analytical methods such as spectrometric, chromatographic, and capillary electrophoresis. But there no significant review has been devoted to MOF/and its derived carbon-based electrodes using electrochemical detection of food contaminants. Here we review and classify MOF-based electrodes over the period between 2017 and 2022, concerning synthetic procedures, electrode fabrication process, and the possible mechanism for detection of the food contaminants which include: heavy metals, antibiotics, mycotoxins, and pesticide residues. The merits and demerits of MOF as electrode material and the need for the fabrication of MOF and its composites/derivatives for the determination of food contaminants are discussed in detail. At last, the current opportunities, key challenges, and prospects in MOF for the development of smart sensing devices for future research in this field are envisioned.

Enhanced catalytic reduction of emerging contaminant by using magnetic CuFe2O4@MIL-100(Fe) in Fenton-based electrochemical processes.

Fenton-based electrochemical processes (FEPs) using newly engineered 3D photocatalyst nanocomposites have garnered significant attention owing to their ability to remove emerging contaminants. Despite the development of numerous materials, there is still a need to enhance their efficiency, stability, and recyclability to address the limitations of FEPs. This study seeks to address this issue by investigating sustainable methods to engineer novel 3D core-shell photocatalyst composites for application in FEPs. These materials can update the photo-assisted FEPs activity, and magnetism can be helpful for the easy recyclability of the catalyst. Herein, we successfully synthesized a magnetic and photoactive CuFe2O4@MIL-100(Fe) (CM) composite through sustainable methods and assessed its morphological structure and physicochemical and photocatalytic properties. The catalytic performance of CM was investigated in an undivided RuO2/air-diffusion cell to treat Cefadroxil. The results show that heterogeneous photoelectro-Fenton (HPEF) (100% in 120 min) has higher degradation efficiency than electro-Fenton (100% in 210 min) and electrooxidation (73.3% in 300 min) processes. The superior degradation efficiency of HPEF is attributed to the formation of a large amount of hydroxyl radicals indicating the excellent photocatalytic activity of the material due to the direct excitation of the Fe-O cluster, which boosts the redox reaction of Fe2+/Fe3+. Key operational parameters such as pH, catalyst concentration, current density, and CuFe2O4 proportion on MIL-100(Fe) in the composite were optimized in the HPEF process. The optimized composite exhibited good stability and easy recyclability, allowing high removal efficiency, which can be kept up after five cycles of 90 min. High degradation performance was observed using natural sunlight radiations. Additionally, possible catalytic degradation mechanisms in HPEFs were proposed based on radical quenching experiments. This study has significant potential to contribute to the development of more sustainable and effective water treatment strategies.

Macrophage Cell Membrane Coating on Piperine-Loaded MIL-100(Fe) Nanoparticles for Breast Cancer Treatment.

Piperine (PIP), a compound found in Piper longum, has shown promise as a potential chemotherapeutic agent for breast cancer. However, its inherent toxicity has limited its application. To overcome this challenge, researchers have developed PIP@MIL-100(Fe), an organic metal-organic framework (MOF) that encapsulates PIP for breast cancer treatment. Nanotechnology offers further treatment options, including the modification of nanostructures with macrophage membranes (MM) to enhance the evasion of the immune system. In this study, the researchers aimed to evaluate the potential of MM-coated MOFs encapsulated with PIP for breast cancer treatment. They successfully synthesized MM@PIP@MIL-100(Fe) through impregnation synthesis. The presence of MM coating on the MOF surface was confirmed through SDS-PAGE analysis, which revealed distinct protein bands. Transmission electron microscopy (TEM) images demonstrated the existence of a PIP@MIL-100(Fe) core with a diameter of around 50 nm, surrounded by an outer lipid bilayer layer measuring approximately 10 nm in thickness. Furthermore, the researchers evaluated the cytotoxicity indices of the nanoparticles against various breast cancer cell lines, including MCF-7, BT-549, SKBR-3, and MDA. The results demonstrated that the MOFs exhibited between 4 and 17 times higher cytotoxicity (IC50) in all four cell lines compared to free PIP (IC50 = 193.67 ± 0.30 µM). These findings suggest that MM@PIP@MIL-100(Fe) holds potential as an effective treatment for breast cancer. The study's outcomes highlight the potential of utilizing MM-coated MOFs encapsulated with PIP as an innovative approach for breast cancer therapy, offering improved cytotoxicity compared to free PIP alone. Further research and development are warranted to explore the clinical translation and optimize the efficacy and safety of this treatment strategy.

Synthesis of a New Co Metal-Organic Framework Assembled from 5,10,15,20-Tetrakis((pyridin-4-yl) phenyl)porphyrin "Co-MTPhPyP" and Its Application to the Removal of Heavy Metal Ions.

The synthesis of a Co metal-organic framework assembled from 5,10,15,20-tetrakis((pyridin-4-yl)phenyl)porphyrin; TPhPyP) "Co-MTPhPyP" is reported. The TPhPyP ligand was synthesized via aldehyde condensation in 28% yield and characterized by 1H nuclear magnetic resonance (1H NMR), Fourier-transform infrared (FTIR), high-resolution mass spectrometry (HRMS), and UV-visible spectroscopy (UV-vis). Co-MTPhPyP was prepared by the solvothermal method from TPhPyP and CoCl2·H2O in 55% yield and characterized by X-ray powder diffraction (XRD), FTIR, thermogravimetric analysis (TGA), field-emission scanning electron microscopy with energy-dispersive X-ray (FESEM-EDS), X-ray photoelectron spectroscopy (XPS), and dynamic light scattering (DLS), showing a particle size distribution of 418 ± 58 nm. The sorption properties of the Co-MTPhPyP for the effective removal of Pb(II) and Cu(II) were evaluated in an aqueous medium and Cthe results showed uptake capacities of 383.4 and 168 mg of the metal g-1 after 2 h, respectively. Kinetic studies of Pb(II) adsorption by Co-MTPhPyP were adjusted to the pseudo-second-order model with a maximum adsorption capacity of 458.8 mg g-1 at 30 min of exposition.

The Methylene Spacer Matters: The Structural and Luminescent Effects of Positional Isomerism of n-Methylpyridyltriazole Carboxylate Semi-Rigid Ligands in the Structure of Zn(II) Based Coordination Polymers.

Two Zn(II) coordination polymers (CPs) based on n-methylpyridyltriazole carboxylate semi-rigid organic ligands (n-MPTC), with n = 3 (L1) and 4 (L2), have been prepared at the water n-butanol interphase by reacting Zn(NO3)2·4H2O with NaL1 and NaL2. This allows us to systematically investigate the influence of the isomeric positional effect on their structures. The organic ligands were obtained by saponification from their respective ester precursors ethyl-5-methyl-1-(pyridin-3-ylmethyl)-1H-1,2,3-triazole-4-carboxylate (P1) and ethyl-5-methyl-1-(pyridin-4-ylmethyl)-1H-1,2,3-triazole-4-carboxylate (P2), resulting in their corresponding sodium salt forms, 3-MPTC, and 4-MPTC. The structure of the Zn(II) CPs determined by single-crystal X-ray diffraction reveals that both CPs have 2D supramolecular hydrogen bond networks. The 2D supramolecular network of [Zn(L1)]n (1) is built up by hydrogen bond interactions between oxygen and hydrogen atoms between neighboring n-methylpyridyltriazole molecules, whereas in [Zn(L2)·4H2O]n (2) the water molecules link 1D polymeric chains forming a 2D supramolecular aggregate. The structures of 1 and 2 clearly show that the isomeric effect in the semi-rigid ligands plays a vital role in constructing the Zn(II) coordination polymers, helped by the presence of the methylene spacer group, in the final structural conformation. The structures of 1 and 2 significantly affect their luminescent properties. Thus, while 2 shows strong emission at room temperature centered at 367 nm, the emission of 1 is quenched substantially.

ZnO@ZIF-8 Nanoparticles as Nanocarrier of Ciprofloxacin for Antimicrobial Activity.

Numerous antimicrobial drugs have been prescribed to kill or inhibit the growth of microbes such as bacteria, fungi, and viruses. Despite the known therapeutic efficacy of these drugs, inefficient delivery could result in an inadequate therapeutic index and several side effects. In order to overcome this adversity, the present study investigated antibiotic drug loading in zeolitic imidazolate frameworks (ZIFs), in association with ZnO nanoparticles with known antimicrobial properties. In an economic synthesis method, the ZnO surface was first converted to ZIF-8 with 2-methylimidazole as a ligand, resulting in a ZnO@ZIF-8 structure. This system enables the high drug-loading efficiency (46%) of an antimicrobial drug, ciprofloxacin, within the pores of the ZIF-8. This association provides a control of the release of the active moieties, in simulated body-fluid conditions, with a maximum of 67% released in 96 h. The antibacterial activities of ZnO@ZIF-8 and CIP-ZnO@ZIF-8 were tested against the Gram-positive Staphylococcus aureus strain and the Gram-negative Pseudomonas aeruginosa strain, showing good growth inhibition. This result was obtained by combining ZnO@ZIF-8 with ciprofloxacin in a minimal inhibitory concentration (MIC) that was 10 times lower than ZnO@ZIF-8 for S. aureus and 200 times lower for P. aeruginosa, suggesting that CIP-ZnO@ZIF-8 may have potential application in prolonged antimicrobial treatment.

Direct Synthesis of HKUST-1 onto Cotton Fabrics and Properties.

Metal-organic frameworks are crystalline nanostructures formed by a metal interspersed by an organic binder. These metal-organic materials are examples of nanomaterials applied to textile material in search of new functionalized textiles. Cotton is a cellulosic fiber of great commercial importance, and has good absorption capacity and breathability; however, due to these characteristics, it is susceptible to the development of microorganisms on its surface. This work aims to analyze how the direct synthesis of HKUST-1 in cotton fabric modifies the chemical and physical properties. The material obtained was characterized by scanning electron microscopy to obtain its morphology, by spectrophotometry CIE L*a*b* to verify the color change, by a biological test to verify its resistance to microorganisms and, finally, by a unidirectional traction test to verify the change in its mechanical resistance. Thereby, it was possible to observe the formation of MOFs with the morphology of nanorods, and also, with regard to HKUST-1 in the cotton fabric, when applied, an elimination percentage higher than 99% was observed for both bacteria, E. coli and S. aureus. The presence of MOF was detected even after washing, however, the loss of 75% in the mechanical resistance of the material makes its potential for textile finishing unworkable.

Biosensor Characterization from Cratylia mollis Seed Lectin (Cramoll)-MOF and Specific Carbohydrate Interactions in an Electrochemical Model.

Biosensors are small devices known for their selectivity, high specificity and sensitivity to the respective analyte, at low concentrations. We developed an electrochemical biosensor using the crystalline polymer MOF-[Cu3 (BTC)2 (H2 O)2 ]n to characterize Cratylia mollis seed lectin (Cramoll) and its interaction with free carbohydrate (glucose) and carbohydrates on the surface of rabbit erythrocytes. The electrochemical potentials presented by the exponential curves that vary from 96 to 142 mV in relation to concentrations of 10 to 20 mM of glucose are decisive for the use of the system containing gold electrode/MOF/Cramoll for the characterization of biological models due to its high sensitivity. As well as the kinetic behavior presented in the cyclic voltammograms, with a cathodic current response of 0.000 3 A for a glucose concentration of 15 mM. These results were due to the high specificity of Cramoll under these conditions, promoting stability of surface charges at the Cramoll/electrode interface. This phenomenon facilitates the monitoring of the interaction with free glucose present in the electrolyte medium by potentiometric and amperometric methods and with carbohydrates present on the surface of rabbit erythrocytes through the potentiometric method. Through scanning electron microscopy (SEM) it was possible to observe Cramoll immobilized on the MOF surface, proving the specificity of the ligand (glucose-lectin) through the morphological lectin changes in this process. This electrochemical model, Cramoll/MOF biosensor, is effective for evaluating free lectin/carbohydrate or in the erythrocyte membrane.

GCMC and electronic evaluation of pesticide capture by IRMOF systems.

Environmental contamination by pesticides is a recurrent problem, and a way to minimize its impacts and provide the reduction of contaminants already in the environment is a challenge. In this context, porous materials such as metal-organic frameworks (MOFs) have gained prominence. MOFs can carry the pesticide when physically or chemically interacting with its pore sites, enabling pesticide capture. However, evaluating the best MOF to maximize the process is an important step that can be performed under computer simulation. This work used grand canonical Monte Carlo simulations to assess the interaction between glyphosate, atrazine, acephate, and dichlorodiphenyltrichloroethane pesticides with the structures of IRMOF-1, IRMOF-8, IRMOF-10, and IRMOF-16. These MOFs present several organic unit types, which generate different pore volumes with similar chemical environment. For glyphosate, atrazine, and acephate, a direct relationship was shown between the pore volume and the amount of captured pesticide, which is a direct contribution from the strong interaction between the pesticides. Higher pore volumes maximize glyphosate, atrazine, and acephate capture. Otherwise, for dichlorodiphenyltrichloroethane, the larger the pore volume, the smaller the amount of pesticide is loaded. The interaction between all pesticides and IRMOFs is mainly governed by van der Waals contribution, being more pronounced for glyphosate, atrazine, and acephate molecules.

A copper-based metal-organic framework/reduced graphene oxide-modified electrode for electrochemical detection of paraquat.

An electrochemical device using copper-based metalorganic franmeworks (MOF) associated with reduced graphene oxide to improve the charge transfer, stability, and adherence of the structures on the surface of the electrodes was developed. The syntheses of these materials were confirmed using scanning electron microscopy, thermogravimetric analysis, X-ray diffraction, Fourier transform infrared and Raman spectroscopy. For the first time, this type of sensor was applied to a systematic study to understand the action mechanism of MOFs and reduced graphene oxide in the electrochemical detection of paraquat pesticide. Under optimized conditions, paraquat was detected in standard solutions by differential pulse voltammetry (- 0.8 to - 0.3 V vs Ag/AgCl), achieving a linear response range between 0.30 and 5.00 µmol L-1. The limits of detection and quantification were 50.0 nmol L-1 and 150.0 nmol L-1, respectively. We assessed the accuracy of the proposed device to determine paraquat in water and human blood serum samples by recovery study, obtaining recovery values ranging from 98 to 104%. Furthermore, the selectivity of the proposed electrode for paraquat detection was evaluated against various interferences, demonstrating their promising application in environmental analysis.

The Surge of Metal-Organic-Framework (MOFs)-Based Electrodes as Key Elements in Electrochemically Driven Processes for the Environment.

Metal-organic-frameworks (MOFs) are emerging materials used in the environmental electrochemistry community for Faradaic and non-Faradaic water remediation technologies. It has been concluded that MOF-based materials show improvement in performance compared to traditional (non-)faradaic materials. In particular, this review outlines MOF synthesis and their application in the fields of electron- and photoelectron-Fenton degradation reactions, photoelectrocatalytic degradations, and capacitive deionization physical separations. This work overviews the main electrode materials used for the different environmental remediation processes, discusses the main performance enhancements achieved via the utilization of MOFs compared to traditional materials, and provides perspective and insights for the further development of the utilization of MOF-derived materials in electrified water treatment.

Removal of hydrogen sulfide from a binary mixture with methane gas, using IRMOF-1: a theoretical investigation.

The natural gas is mainly composed by methane, ethane, propane, and contaminants. Among these contaminants, the H2S gas has some specific characteristics such as its toxicity and corrosion, besides reducing the combustion power efficiency of natural gas. In this context, metal-organic frameworks appear as promising materials for purification of natural gas by adsorption, due to their large surface area and pore volume. In this work, Grand Canonical Monte Carlo method was used to study the adsorption and separation of CH4:H2S mixture by IRMOF-1. The adsorption isotherms were computed for the pure components, and at different compositions of binary mixture (90:10, 75:25, 50:50, 25:75, and 10:90). Interaction energy obtained with the semiempirical method confirmed that the inorganic unit is the preferred site for CH4 and H2S adsorption. Moreover, in a gas mixture with 50:50 proportion of CH4:H2S mixture, methane adsorbs preferentially in the inorganic unit only at pressures close to 20 bar. Non-covalent interaction (NCI) analyses indicated that the interactions involving H2S are more effective than that for CH4, due to an electrostatic character in the H2S interaction. The simulations also showed that the separation of gases occurs in all compositions and pressures studied, suggesting that IRMOF-1 has a promising potential for this application.

Synthesis of UV-11 MOF and Its Characterization by Cyclic Voltammetry.

In this work a Metal-Organic Framework (MOF) was prepared using a solvothermal method, taking as precursors 1. 2-di-(4-pyridyl)-ethylene, 1.2.4.5-benzenetetracarboxylic acid and Co(No3)2-6H2O. This MOF was called UV-11 and was evaluated using microscopic, spectroscopic and electrochemical techniques. According to the obtained results, the melting point of the compound is located in a higher interval than its precursors. Stereoscopic microscopy analysis shows the presence of pink crystals in the form of needles. MEB technique displays a laminar morphology as well as crystals with approximate sizes (36 mm wide and 150 mm long). EDS analysis corroborated the presence of precursor elements such as cobalt, carbon and oxygen. Furthermore, the XRD technique shows the cobalt-related phases in the sample, which is cobalt bis (pyridine-6-carboxylic-2-carboxylate). A modified carbon paste electrode was prepared using MOF UV-11 and by cyclic voltammetry electrochemical technique, semi-reversible redox processes are identified, as well as thermodynamic and kinetic parameters were obtained with the Laviron equation, and electrochemical performance properties from the cyclic voltammetry experimental data.

Sensing mechanism elucidation of a europium(III) metal-organic framework selective to aniline: A theoretical insight by means of multiconfigurational calculations.

A theoretical procedure, via quantum chemical computations, to elucidate the detection principle of the turn-off luminescence mechanism of an Eu-based Metal-Organic Framework sensor (Eu-MOF) selective to aniline, is accomplished. The energy transfer channels that take place in the Eu-MOF, as well as understanding the luminescence quenching by aniline, were investigated using the well-known and accurate multiconfigurational ab initio methods along with sTD-DFT. Based on multireference calculations, the sensitization pathway from the ligand (antenna) to the lanthanide was assessed in detail, that is, intersystem crossing (ISC) from the S1 to the T1 state of the ligand, with subsequent energy transfer to the 5 D0 state of Eu3+ . Finally, emission from the 5 D0 state to the 7 FJ state is clearly evidenced. Otherwise, the interaction of Eu-MOF with aniline produces a mixture of the electronic states of both systems, where molecular orbitals on aniline now appear in the active space. Consequently, a stabilization of the T1 state of the antenna is observed, blocking the energy transfer to the 5 D0 state of Eu3+ , leading to a non-emissive deactivation. Finally, in this paper, it was demonstrated that the host-guest interactions, which are not taken frequently into account by previous reports, and the employment of high-level theoretical approaches are imperative to raise new concepts that explain the sensing mechanism associated to chemical sensors.

Supramolecular cyclodextrin-based metal-organic frameworks as efficient carrier for anti-inflammatory drugs.

Drug delivery systems have been used to reduce adverse effects and improve the efficacy of therapies. Drug carriers have been developed over the years, but they have limitations. γ-cyclodextrin-based metal-organic frameworks (γ-CD-MOF) have significant advantages due to their biocompatibility and environmental safety, besides crystallinity and porosity. Herein, γ-CD-MOFs were synthesised with different metals as nodes and investigated. Uniform mesoporous γ-CD-MOFs were obtained and showed an absence of toxicity in HepG2 and Caco-2 cells. The longer controlled release was verified for γ-CD-MOFs, with a maximum of 62% released in 12 h. An inflammation experiment was performed in mice and activity equivalent to the positive control was verified. γ-KCD-MOFs and γ-NaCD-MOFs reached activity after 6 h of administration, however this happened after 24 h in γ-FeCD-MOFs, being more effective than the positive control. Considering the ability for drug entrapment, easy preparation and controlled release, this class of material allows potential applications in drug delivery systems.

Synthesis and anti-myocarditis activity in a multifunctional lanthanide microporous metal-organic framework with 1D helical chain building units

A new microporous lanthanide metal-organic framework, {[Yb(BTB)(H2O) (DEF)2}n (1, DEF=N,N-Diethylformamide), with 1D nano-sized channels has been constructed by bridging helical chain secondary building units with 1,3,5-benzenetrisbenzoic acid (H3BTB) ligand. Structural characterization suggests that this complex crystallizes in the hexagonal space group P6122 and possesses 1D triangular channels with coordinated water molecules pointing to the channel center. In addition, anti-myocarditis properties of compound 1 were evaluated in vivo. The results showed that compound 1 can improve hemodynamic parameters of, and it may be a good therapeutic option for heart failure in the future.

Self-Assembly of Discrete Metallocycles versus Coordination Polymers Based on Cu(I) and Ag(I) Ions and Flexible Ligands: Structural Diversification and Luminescent Properties.

Three new Ag(I) and one Cu(I) coordination compounds with two different positional isomers, propane-1,3-diyl bis(pyridine-4-carboxylate) (L1) and propane-1,3-diyl bis(pyridine-3-carboxylate) (L2), of a bis-(pyridyl-carboxylate) ligand have been synthesized. X-ray diffraction analysis revealed that the self-assembly of L1 with AgCF3SO3 and AgClO4 salts leads to the formation of discrete binuclear metallocycles {Ag(L1)CF3SO3}2 (1) and {Ag(L1)ClO4}2 (2), respectively. However, self-assembly of the other ligand, L2, with AgCF3SO3 and CuCl salts, results in a 1-D zig-zag chain {Ag(L2)CF3SO3}∞ (3) and a 1-D double-stranded helical chain {Cu2Cl2(L2)2}∞ (4) coordination polymers, respectively. Solid emission spectra recorded at room temperature show interesting luminescence properties for all four compounds in the range from 438 to 550 nm, especially for compound 4 that was found to change its emission color when the wavelength of the excitation radiation is switched from 332 to 436 nm.

Influence of the solvent in the synthesis of zeolitic imidazolate framework-8 (ZIF-8) nanocrystals at room temperature.

The effect of the solvent on the synthesis process and on the nanocrystal characteristics of the zeolitic imidazolate framework-8 (ZIF-8) was investigated. A synthesis protocol at room temperature employing a series of aliphatic alcohols, water, dimethylformamide and acetone was employed. The results show that the solvent modifies the evolution of the reaction, altering the crystallization rates and nanocrystal sizes. Its hydrogen bond donation ability is the main factor that governs this effect. More precisely, the solvent modulates the formation of ZIF-8 nanocrystals with sizes in the range between 15 and 42 nm. When synthesized in alcohol and acetone, these nanocrystals form globular aggregates with sizes between 130 and 420 nm. In contrast, under the same synthesis conditions, when using water or dimethylformamide the ZIF phase is not developed. In alcohols other than methanol, the crystals develop pill-shaped morphologies with poorly defined facets. Moreover, a markedly fast growing kinetics is verified in these alcohols, leading to an ultra-fast crystallization of ZIF-8 in about 60s. These findings provide new information about the role of the solvent in the synthesis process of nanoZIF-8, which can be useful for controlling the crystallization rates and nanocrystal sizes of this material.