Correlating local structure and migration dynamics in Na/Li dual ion conductor Na5YSi4O12.

Na5YSi4O12 (NYSO) is demonstrated as a promising electrolyte with high ionic conductivity and low activation energy for practical use in solid Na-ion batteries. Solid-state NMR was employed to identify the six types of coordination of Na+ ions and migration pathway, which is vital to master working mechanism and enhance performance. The assignment of each sodium site is clearly determined from high-quality 23Na NMR spectra by the aid of Density Functional Theory calculation. Well-resolved 23Na exchangespectroscopy and electrochemical tracer exchange spectra provide the first experimental evidence to show the existence of ionic exchange between sodium at Na5 and Na6 sites, revealing that Na transport route is possibly along three-dimensional chain of open channel-Na4-open channel. Variable-temperature NMR relaxometry is developed to evaluate Na jump rates and self-diffusion coefficient to probe the sodium-ion dynamics in NYSO. Furthermore, NYSO works well as a dual ion conductor in Na and Li metal batteries with Na3V2(PO4)3 and LiFePO4 as cathodes, respectively.

'Beyond Li-Ion Technology' - A status review.

Li-ion battery is currently considered to be the most proven technology for energy storage systems when it comes to the overall combination of energy, power, cyclability and cost. However, there are continuous expectations for cost reduction in large-scale applications, especially in electric vehicles and grids, alongside growing concerns over safety, availability of natural resources for lithium, and environmental remediation. Therefore, industry and academia have consequently shifted their focus towards "beyond Li-ion technologies". In this respect, other non-Li-based alkali-ion/polyvalent-ion batteries, non-Li-based all solid-state batteries, fluoride-ion/ammonium-ion batteries, redox-flow batteries, sand batteries and hydrogen fuel cells etc. are becoming potential cost-effective alternatives. While there has been notable swift advancement across various materials, chemistries, architectures, and applications in this field, a comprehensive overview encompassing high-energy "beyond Li-ion" technologies, along with considerations of commercial viability, is currently lacking. Therefore, in this review article, a rationalized approach is adopted to identify notable 'post-Li' candidates. Their pros and cons are comprehensively presented by discussing the fundamental principles in terms of material characteristics, relevant chemistries, and architectural developments that make a good high-energy 'beyond Li' storage system. Furthermore, a concise summary outlining the primary challenges of each system is provided, alongside the potential strategies being implemented to mitigate these issues. Additionally, the extent to which these strategies have positively influenced the performance of these 'post-Li' technologies is discussed.

Mechanically Exfoliated Graphite for Highly Reversible Na-Storage with Carbon Coated Na3V2(PO4)3 Cathode with Low-Temperature Conditions.

Tremendous efforts are put forward to develop novel high-performance electrodes for Na-ion batteries (SIBs) in order to replace commercial Li-ion batteries (LIBs). Graphite, the most versatile anode for LIBs, fails to accommodate Na+ions owing to the poor thermodynamic stability of the binary graphite intercalation compound. This study aims to exfoliate the layers of graphite through a simple mechanical process at different time intervals (1, 5, 10, 20, 40, and 80 h) and examine the potential candidate for Na-storage in the presence of carbonate-based electrolytes. This study reports that ball milling plays a vital role in the performance of the graphite in Na-storage. The graphite exfoliated for 80 h (EG-80h) rendered an excellent reversible capacity of 209 mAh g-1 with coulombic efficiency of >99% after 100 cycles in EC-based electrolyte. In situ impedance analysis is performed to validate the charge storage mechanism and Na-ion kinetics. The performance of EG-80h in a full-cell assembly is evaluated with a carbon-coated Na3V2(PO4)3 cathode, which exhibited an initial capacity of ≈75 mAh g-1 and energy density of 201 Wh kg-1. In addition, the adaptability of the NVPC/EG-80h cell at different temperatures is examined from -10 to 50 °C, displaying excellent performance in both high and low-temperature conditions.

Achieving High-Capacity Cathode Presodiation Agent Via Triggering Anionic Oxidation Activity in Sodium Oxide.

Compensating for the irreversible loss of limited active sodium (Na) is crucial for enhancing the energy density of practical sodium-ion batteries (SIBs) full-cell, especially when employing hard carbon anode with initially lower coulombic efficiency. Introducing sacrificial cathode presodiation agents, particularly those that own potential anionic oxidation activity with a high theoretical capacity, can provide additional sodium sources for compensating Na loss. Herein, Ni atoms are precisely implanted at the Na sites within Na2O framework, obtaining a (Na0.89Ni0.05□0.06)2O (Ni-Na2O) presodiation agent. The synergistic interaction between Na vacancies and Ni catalyst effectively tunes the band structure, forming moderate Ni-O covalent bonds, activating the oxidation activity of oxygen anion, reducing the decomposition overpotential to 2.8 V (vs Na/Na+), and achieving a high presodiation capacity of 710 mAh/g≈Na2O (Na2O decomposition rate >80%). Incorporating currently-modified presodiation agent with Na3V2(PO4)3 and Na2/3Ni2/3Mn1/3O2 cathodes, the energy density of corresponding Na-ion full-cells presents an essential improvement of 23.9% and 19.3%, respectively. Further, not limited to Ni-Na2O, the structure-function relationship between the anionic oxidation mechanism and electrode-electrolyte interface fabrication is revealed as a paradigm for the development of sacrificial cathode presodiation agent.

Mechanical Activation of Graphite for Na-Ion Battery Anodes: Unexpected Reversible Reaction on Solid Electrolyte Interphase via X-Ray Analysis.

Although sodium-ion batteries (SIBs) offer promising low-cost alternatives to lithium-ion batteries (LIBs), several challenges need to be overcome for their widespread adoption. A primary concern is the optimization of carbon anodes. Graphite, vital to the commercial viability of LIBs, has a limited capacity for sodium ions. Numerous alternatives to graphite are explored, particularly focusing on disordered carbons, including hard carbon. However, compared with graphite, most of these materials underperform in LIBs. Furthermore, the reaction mechanism between carbon and sodium ions remains ambiguous owing to the structural diversity of disordered carbon. A straightforward mechanical approach is introduced to enhance the sodium ion storage capacity of graphite, supported by comprehensive analytical techniques. Mechanically activated graphite delivers a notable reversible capacity of 290.5 mAh·g-1 at a current density of 10 mA·g-1. Moreover, it maintains a capacity of 157.7 mAh·g-1 even at a current density of 1 A·g-1, benefiting from the defect-rich structure achieved by mechanical activation. Soft X-ray analysis revealed that this defect-rich carbon employs a sodium-ion storage mechanism distinct from that of hard carbon. This leads to an unexpected reversible reaction on the solid electrolyte surface. These insights pave the way for innovative design approaches for carbon electrodes in SIB anodes.

Facile Fabrication of Hollow Nanoporous Carbon Architectures by Controlling MOF Crystalline Inhomogeneity for Ultra-Stable Na-Ion Storage.

Hollow nanoporous carbon architectures (HNCs) present significant utilitarian value for a wide variety of applications. Facile and efficient preparation of HNCs has long been pursued but still remains challenging. Herein, we for the first time demonstrate that single-component metal-organic frameworks (MOFs) crystals, rather than the widely reported hybrid ones which necessitate tedious operations for preparation, could enable the facile and versatile syntheses of functional HNCs. By controlling the growth kinetics, the MOFs crystals (STU-1) are readily engineered into different shapes with designated styles of crystalline inhomogeneity. A subsequent one-step pyrolysis of these MOFs with intraparticle difference can induce a simultaneous self-hollowing and carbonization process, thereby producing various functional HNCs including yolk-shell polyhedrons, hollow microspheres, mesoporous architectures, and superstructures. Superior to the existing methods, this synthetic strategy relies only on the complex nature of single-component MOFs crystals without involving tedious operations like coating, etching, or ligand exchange, making it convenient, efficient, and easy to scale up. An ultra-stable Na-ion battery anode is demonstrated by the HNCs with extraordinary cyclability (93 % capacity retention over 8000 cycles), highlighting a high level of functionality of the HNCs.

Unraveling the (De)sodiation Mechanisms of BiFeO3 at a High Rate with Operando XRD.

Development of new anode materials for Na-ion batteries strongly depends on a detailed understanding of their cycling mechanism. Due to instrumental limitations, the majority of mechanistic studies focus on operando materials' characterization at low cycling rates. In this work, we evaluate and compare the (de)sodiation mechanisms of BiFeO3 in Na-ion batteries at different current densities using operando X-ray diffraction (XRD) and ex situ X-ray absorption spectroscopy (XAS). BiFeO3 is a conversion-alloying anode material with a high initial sodiation capacity of ∼600 mAh g-1, when cycled at 0.1 A g-1. It does not change its performance or cycling mechanism, except for minor losses in capacity, when the current density is increased to 1 A g-1. In addition, operando XRD characterization carried out over multiple cycles shows that the Bi ⇋ NaBi (de)alloying reaction and the oxidation of Bi at the interface with the Na-Fe-O matrix are detrimental for cycling stability. The isolated NaBi ⇋ Na3Bi reaction is less damaging to the cycling stability of the material.

Composition Analysis of the Solid Electrolyte Interface of NaK Anodes in Na-Ion Batteries.

Sodium-ion batteries have emerged as a promising alternative to Li-ion batteries due to the abundance of sodium. However, anodes in Na-ion batteries face challenges such as dendrite formation and an unstable solid electrolyte interface layer. To address these challenges, NaK liquid metal alloy anodes have been proposed as an alternative because they do not form dendrites. In our study, we demonstrate that the NaK alloy anode interacts with the commonly used ethylene carbonate and dimethyl carbonate electrolyte, leading to a continuously growing unstable SEI layer, evidenced by cycling failures under 100 cycles and an increasing charge transfer resistance in electrochemical impedance spectroscopy studies. In situ surface-enhanced Raman spectroscopy and X-ray photoelectron spectroscopy reveal that over the course of cycling the surface of the NaK anode becomes increasingly sodium-rich. After 30 cycles, XPS analysis detects only trace amounts of potassium on the NaK anode surface. When the electrolyte is analyzed postcycling using inductively coupled plasma optical emission spectroscopy, there is a noticeable increase in potassium levels, suggesting that potassium metal dissolves into the electrolyte. The introduction of a 10 wt % fluoroethylene carbonate additive can mitigate this problem to some extent, enabling an enhanced cycling performance of up to 800 cycles at 1C. Nevertheless, the dissolution of K metal is still evident in the XPS results, albeit to a lesser degree. These discoveries provide valuable insights for designing a more robust SEI layer for the NaK anode.

Biotene: Earth-Abundant 2D Material as Sustainable Anode for Li/Na-Ion Battery.

Natural ores are abundant, cost-effective, and environmentally friendly. Ultrathin (2D) layers of a naturally abundant van der Waals mineral, Biotite, have been prepared in bulk via exfoliation. We report here that this 2D Biotene material has shown extraordinary Li-Na-ion battery anode properties with ultralong cycling stability. Biotene shows 302 and 141 mAh g-1 first cycle-specific charge capacity for Li- and Na-ion battery applications with ∼90% initial Coulombic efficiency. The electrode exhibits significantly extended cycling stability with ∼75% capacity retention after 4000 cycles even at higher current densities (500-2000 mA g-1). Further, density functional theory studies show the possible Li intercalation mechanism between the 2D Biotene layers. Our work brings new directions toward designing the next generation of metal-ion battery anodes.

Synergetic Sn Incorporation-Zn Substitution in Copper-Based Sulfides Enabling Superior Na-Ion Storage.

Transition-metal sulfides have been regarded as perspective anode candidates for high-energy Na-ion batteries. Their application, however, is precluded severely by either low charge storage or huge volumetric change along with sluggish reaction kinetics. Herein, an effective synergetic Sn incorporation-Zn substitution strategy is proposed based on copper-based sulfides. First, Na-ion storage capability of copper sulfide is significantly improved via incorporating an alloy-based Sn element. However, this process is accompanied by sacrifice of structural stability due to the high Na-ion uptake. Subsequently, to maintain the high Na-ion storage capacity, and concurrently improve cycling and rate capabilities, a Zn substitution strategy (taking partial Sn sites) is carried out, which could significantly promote Na-ion diffusion/reaction kinetics and relieve mechanical strain-stress within the crystal framework. The synergetic Sn incorporation and Zn substitution endow copper-based sulfides with high specific capacity (≈560 mAh g-1 at 0.5 A g-1 ), ultrastable cyclability (80 k cycles with ≈100% capacity retention), superior rate capability up to 200 A g-1 , and ultrafast charging feature (≈4 s per charging with ≈190 mAh g-1 input). This work provides in-depth insights for developing superior anode materials via synergetic multi-cation incorporation/substitution, aiming at solving their intrinsic issues of either low specific capacity or poor cyclability.

Disclosing the Interfacial Electrolyte Structure of Na-Insertion Electrode Materials: Origins of the Desolvation Phenomenon.

Among a variety of promising cathode materials for Na-ion batteries, polyanionic Na-insertion compounds are among the preferred choices due to known fast sodium transfer through the ion channels along their framework structures. The most interesting representatives are Na3V2(PO4)3 (NVP) and Na3V2(PO4)2F3 (NVPF), which display large Na+ diffusion coefficients (up to 10-9 m2 s-1 in NVP) and high voltage plateaux (up to 4.2 V for NVPF). While the diffusion in the solid material is well-known to be the rate-limiting step during charging, already being thoroughly discussed in the literature, interfacial transport of sodium ions from the liquid electrolyte toward the electrode was recently shown to be important due to complex ion desolvation effects at the surface. In order to fill the blanks in the description of the electrode/electrolyte interface in Na-ion batteries, we performed a molecular dynamics study of the local nanostructure of a series of carbonate-based sodium electrolytes at the NVP and the NVPF interfaces along with careful examination of the desolvation phenomenon. We show that the tightness of solvent packing at the electrode surface is a major factor determining the height of the free energy barrier associated with desolvation, which explains the differences between the NVP and the NVPF structures. To rationalize and emphasize the remarkable properties of this family of cathode materials, a complementary comparative analysis of the same electrolyte system at the carbon electrode interface was also performed.

Incorporation of Bimetallic Sulfide with Carbon Nitride for Advanced Na-Ion Batteries.

Sodium-ion batteries (SIBs) have received tremendous attention owing to their low cost, high working voltages, and energy density. However, the design and development of highly efficient SIBs represent a great challenge. Here, a unique and reliable approach is reported to prepare carbon nitride (CN) hybridized with nickel iron sulfide (NFCN) using simple reaction between Ni-Fe layered double hydroxide and dithiooxamide. The characterization results demonstrate that the hybridization with optimal amount of CN induces local distortion in the crystal structure of the hybrid, which would benefit SIB performance. Systematic electrochemical studies with a half-cell configuration show that the present hybrid structure exhibits a promising reversible specific capacity of 348 mAh g-1 at 0.1 A g-1 after 100 cycles with good rate capability. Simulation result reveals that the iron atoms in nickel iron sulfide act as a primary active site to accommodate Na+ ions. At last, with a full cell configuration using NFCN and Na3 V2 (PO4 )2 O2 F as the anode and cathode, respectively, the specific capacity appears to be ≈95 mAh g-1 after 50 cycles at 0.1 A g-1 condition. This excellent performance of these hybrids can be attributed to the synergistic effect of the incorporated CN species and the high conductivity of nickel-iron sulfide.

Carbonization of Corn Leaf Waste for Na-Ion Storage Application Using Water-Soluble Carboxymethyl Cellulose Binder.

Hard carbon materials are considered to be the most practical anode materials for sodium ion batteries because of the rich availability of their resources and potentially low cost. Here, the conversion of corn leaf biomass, a largely available agricultural waste, into carbonaceous materials for Na-ion storage application is reported. Thermal analysis investigation determines the presence of exothermic events occurring during the thermal treatment of the biomass. Accordingly, various temperatures of 400, 500, and 600 °C are selected to perform carbonization treatment trials, leading to the formation of various biocarbons. The materials obtained are characterized by a combination of methods, including X-ray diffraction, electron microscopy, surface evaluation, Raman spectroscopy, and electrochemical characterizations. The Na-ion storage performances of these materials are investigated using water-soluble carboxymethyl cellulose binder, highlighting the influence of the carbonization temperature on the electrochemical performance of biocarbons. Moreover, the influence of post-mechanochemical treatment on the Na-ion storage performance of biocarbons is studied through kinetic evaluations. It is confirmed that reducing the particle sizes and increasing the carbon purity of biocarbons and the formation of gel polymeric networks would improve the Na-ion storage capacity, as well as the pseudocapacitive contribution to the total current. At a high-current density of 500 mA g-1, a specific Na-ion storage capacity of 134 mAh g-1 is recorded on the biocarbon prepared at 600 °C, followed by ball-milling and washing treatment, exhibiting a reduced charge transfer resistance of 49 Ω and an improved Na-ion diffusion coefficient of 4.8 × 10-19 cm2 s-1. This article proposes a simple and effective technique for the preparation of low-cost biocarbons to be used as the anode of Na-ion batteries.

Electrochemical Response of 3D-Printed Free-Standing Reduced Graphene Oxide Electrode for Sodium Ion Batteries Using a Three-Electrode Glass Cell.

Graphene and its derivatives have been widely used to develop novel materials with applications in energy storage. Among them, reduced graphene oxide has shown great potential for more efficient storage of Na ions and is a current target in the design of electrodes for environmentally friendly Na ion batteries. The search for more sustainable and versatile manufacturing processes also motivates research into additive manufacturing electrodes. Here, the electrochemical responses of porous 3D-printed free-standing log-type structures fabricated using direct ink writing (DIW) with a graphene oxide (GO) gel ink are investigated after thermal reduction in a three-electrode cell configuration. The structures delivered capacities in the range of 50-80 mAh g-1 and showed high stability for more than 100 cycles. The reaction with the electrolyte/solvent system, which caused an initial capacity drop, was evidenced by the nucleation of various Na carbonates and Na2O. The incorporation of Na into the filaments of the structure was verified with transmission electron microscopy and Raman spectroscopy. This work is a proof of concept that structured reduced GO electrodes for Na ion batteries can be achieved from a simple, aqueous GO ink through DIW and that there is scope for improving their performance and capacity.

Carbon-coated iron selenide derived from double-framework as an advance anode for Na-ion battery.

Owing to the desirable nano-morphology, controllable structure, and ease of preparation, metal-organic frameworks (MOFs) are widely used as the precursors for electrodes in Na-ion battery (NIB). However, MOF structures are prone to fracture and collapse during the reactions. Additionally, MOF-derived electrodes often exhibit a high expansion rate, which negatively impacts the long cyclic capability of NIBs. Herein, we employed a stable covalent-organic framework (COF) as a protective coating for the first time to preserve the MOF structure. A shuttle-like iron selenide (Fe3Se4) coated with N-doped carbon (NC) was synthesized using a simple hydrothermal method, surface coating, and subsequent selenizing process. Due to its large specific surface area and well-developed porosity, the double-framework derived Fe3Se4/NC electrode provides abundant active sites for Na+ storage. The COF and COF-derived NC protect the structure of Fe3Se4/NC during synthesis and cyclic process, respectively. The high conductivity of the NC coating enhances the electron/ion conductivity of Fe3Se4/NC, thereby beneficial the rate performance. As the material anode for NIB, the Fe3Se4/NC electrode exhibits a high initial charging/discharging capacity (425.7/478.4 mAh·g-1 with an initial Coulombic efficiency of 89.0 %), excellent rate performance (333.5 mAh·g-1 at 12 A·g-1), long-durable cycle capability (290.8 mAh·g-1 after 1000 cycles at 8 A·g-1) and fast charging ability (143 s). This work provides a novel strategy of "COF on MOF" to prepare high-performance electrode materials for NIB.

Highly Stable MWCNT@NVP Composite as a Cathode Material for Na-Ion Batteries.

A 3D framework with Nasicon structured polyanionic Na3V2(PO4)3 (NVP) has been emphasized as a leading cathode material for sodium-ion batteries (SIBs) due to its high working voltage plateau, structural stability, and good rate performance. Herein, pristine NVP and MWCNT@NVP composite synthesized via a facile solid-state method are examined and compared as cathode materials for Na-ion batteries. The morphological study confirms the uniform distribution of MWCNTs in the pristine NVP structure. Impedance spectroscopy clearly confirms more diffusion of Na ions for the MWCNT@NVP composite as compared to pristine NVP, considering its diffusion coefficient which directly implies on an increase in specific capacity. MWCNT@NVP (FNV-2) showed specific discharge capacity 110 mAhg-1 at 0.1C current rate which is almost stable at higher current rates with marginal fading. However, the pristine NVP shows capacity loss at a higher current rate. It is noteworthy that the MWCNT@NVP composite shows stable performance with marginal specific capacity fading (1%) compared to pristine (15%). This is because of the mechanical integrity and stability afforded to the composite by the intertwined MWCNT framework in the MWCNT@NVP composite matrix against electrode degradation during the electrochemical reaction. More significantly, even at a higher current rate, that is, at 10 C, the composite recorded a very stable and excellent Columbic efficiency of 97% with a reversible specific capacity of 94 mAhg-1 after 2000 cycles. An enhanced electrochemical performance, that is, rate capability and cycling stability, demonstrates the high potential of the MWCNT@NVP composite for Na-ion storage. Moreover, a sodium-ion full cell with hard carbon demonstrated a reversible capacity of 103 mAhg-1 at C/20 current rate, which clearly demonstrates that MWCNT@NVP is a promising cathode material for sodium-ion batteries.

Facile and Scalable Development of High-Performance Carbon-Free Tin-Based Anodes for Sodium-Ion Batteries.

Tin (Sn)-based anodes for sodium (Na)-ion batteries possess higher Na-storage capacity and better safety aspects compared to hard carbon -based anodes but suffer from poor cyclic stability due to volume expansion/contraction and concomitant loss in mechanical integrity during sodiation/desodiation. To address this, the usage of nanoscaled electrode-active particles and nanoscaled-carbon-based buffers has been explored, but with compromises with the tap density, accrued irreversible surface reactions, overall capacity (for "inactive" carbon), and adoption of non-scalable/complex preparation routes. Against this backdrop, anode-active "layered" bismuth (Bi) has been incorporated with Sn via a facile-cum-scalable mechanical-milling approach, leading to individual electrode-active particles being composed of well-dispersed Sn and Bi phases. The optimized carbon-free Sn-Bi compositions, benefiting from the combined effects of "buffering" action and faster Na transport of Bi, to go with the greater Na-storage capacity and lower operating potential of Sn, exhibit excellent cyclic stability (viz., ∼83-92% capacity retention after 200 cycles at 1C) and rate capability (viz., no capacity drop from C/5 to 2C, with only ∼25% drop at 5C), despite having fairly coarse particles (∼5-10 µm). As proven by operando synchrotron X-ray diffraction and stress measurements, the sequential sodiation/desodiation of the components and, concomitantly, stress build-ups at different potentials provide "buffering" action even for such "active-active" Sn-Bi compositions. Furthermore, the overall stress development upon sodiation of Bi has been found to be significantly lower than that of Sn (by a factor of ∼3.8), which renders Bi promising as a "buffer" material, in general. Dissemination of such complex interplay between electrode-active components during electrochemical cycling also paves the way for the development of high-performance, safe, and scalable "alloying-reaction"-based anode materials for Na-ion batteries and beyond, sans the need for ultrafine/nanoscaled electrode particles or "inactive" nanoscaled-carbon-based "buffer" materials.

Exploiting Cation Intercalating Chemistry to Catalyze Conversion-Type Reactions in Batteries.

Effective harvest of electrochemical energy from insulating compounds serves as the key to unlocking the potential capacity from many materials that otherwise could not be exploited for energy storage. Herein, an effective strategy is proposed by employing LiCoO2, a widely commercialized positive electrode material in Li-ion batteries, as an efficient redox mediator to catalyze the decomposition of Na2CO3 via an intercalating mechanism. Differing from traditional redox mediation processes where reactions occur on the limited surface sites of catalysts, the electrochemically delithiated Li1-xCoO2 forms NayLi1-xCoO2 crystals, which act as a cation intercalating catalyzer that directs Na+ insertion-extraction and activates the reaction of Na2CO3 with carbon. Through altering the route of the mass transport process, such redox centers are delocalized throughout the bulk of LiCoO2, which ensures maximum active reaction sites. The decomposition of Na2CO3 thus accelerated significantly reduces the charging overpotential in Na-CO2 batteries; meanwhile, Na compensation can also be achieved for various Na-deficient cathode materials. Such a surface-induced catalyzing mechanism for conversion-type reactions, realized via cation intercalation chemistry, expands the boundary for material discovery and makes those conventionally unfeasible a rich source to explore for efficient utilization of chemical energy.

Unprecedented Cyclability and Moisture Durability of NaCrO2 Sodium-Ion Battery Cathode via Simultaneous Al Doping and Cr2O3 Coating.

Although there are many cathode candidates for sodium-ion batteries (NIBs), NaCrO2 remains one of the most attractive materials due to its reasonable level of capacity, nearly flat reversible voltages, and high thermal stability. However, the cyclic stability of NaCrO2 needs to be further improved in order to compete with other state-of-the-art NIB cathodes. In this study, we show that Cr2O3-coated and Al-doped NaCrO2, which is synthesized through a simple one-pot synthesis, can achieve unprecedented cyclic stability. We confirm the preferential formation of a Cr2O3 shell and a Na(Cr1-2xAl2x)O2 core, rather than xAl2O3/NaCrO2 or Na1/1+2x(Cr1/1+2xAl2x/1+2x)O2, through spectroscopic and microscopic methods. The core/shell compounds exhibit superior electrochemical properties compared to either Cr2O3-coated NaCrO2 without Al dopants or Al-doped NaCrO2 without shells because of their synergistic contributions. As a result, Na(Cr0.98Al0.02)O2 with a thin Cr2O3 layer (5 nm) shows no capacity fading during 1000 charge/discharge cycles while maintaining the rate capability of pristine NaCrO2. In addition, the compound is inert against humid air and water. We also discuss the reasons for the excellent performance of Cr2O3-coated Na(Cr1-2xAl2x)O2.

Influence of Vacancies in Manganese Hexacyanoferrate Cathode for Organic Na-Ion Batteries: A Structural Perspective.

Manganese hexacyanoferrates (MnHCF) are promising positive electrode materials for non-aqueous batteries, including Na-ion batteries, due to their large specific capacity (>130 mAh g-1 ), high discharge potential and sustainability. Typically, the electrochemical reaction of MnHCF associates with phase and structural changes, due to the Jahn-Teller (JT) distortion of Mn sites upon the charge process. To understand the effect of the MnHCF structure on its electrochemical performance, two MnHCF materials with different vacancies content are investigated herein. The electrochemical results show that the sample with lower vacancy content (4 %) exhibits relatively higher capacity retention of 99.1 % and 92.6 % at 2nd and 10th cycles, respectively, with respect to 97.4 % and 79.3 % in sample with higher vacancy content (11 %). Ex-situ X-ray absorption spectroscopy (XAS) and ex situ X-ray diffraction (XRD) characterization results show that a weaker cooperative JT-distortion effect and relatively smaller crystal structure modification occurred for the material with lower vacancies, which explains the better electrochemical performance in cycled electrodes.