In Situ Construction of SnS2@SnO2 Heterostructure for Photo-Assisted Electrocatalysis of Oxygen Evolution Reaction.

Photo-assisted electrocatalysis has arisen as a promising approach for hydrogen generation by incorporating photocatalysts into electrocatalysts. 2D SnS2 is a photocatalyst that absorbs visible light. However, the rapid recombination of photo-generated electron-hole pairs significantly reduces the overall photocatalytic efficiency of SnS2, limiting its practical application. Thus, this study prepares an in situ heterojunction SnS2@SnO2 using a one-step hydrothermal method. The degradation efficiency of methyl orange (MO) using SnS2@SnO2 is measured, achieving a degradation rate of 92.75% within 1 h, which is 1.9 times higher than that of pure SnS2. Additionally, FeNiS/SnS2@SnO2 is synthesized and exhibited significant improvements in the photo-assisted oxygen evolution reaction (OER). It achieves an overpotential of 260 mV and a Tafel slope of 65.1 mV dec-1 at 10 mA cm-2, showing reductions of 11.8% and 31.8%, respectively, compared to FeNiS alone. These enhancements highlight the strong photo-response capability of SnS2@SnO2. Under the internal electric field of SnS2@SnO2, the photogenerated electrons in the conduction band of SnS2 quickly move toward SnO2, facilitating efficient photocatalytic reactions. FeNiS, with a lower Fermi energy level (EF), facilitates electron transfer from SnS2@SnO2 and enhances OER performance by efficiently participating in the reaction. This study paves a new path for 2D photocatalyst materials.

Green synthesis of novel Z-scheme SnS2/HAp nanocomposite using Ocimum tenuiflorum leaf extract and investigation of its photocatalytic activity.

The present study focuses on the green synthesis of a novel Z-scheme SnS2/HAp photocatalyst using Ocimum tenuiflorum (tulsi) leaf extract as a stabilizing agent. This approach not only emphasizes sustainability but also adds value to waste by extracting hydroxyapatite (HAp) from Labeo rohita fish scales, addressing the challenge of their disposal. The synthesized photocatalyst was thoroughly characterized using a range of analytical techniques to evaluate its crystal structure, optical properties, morphology, and elemental composition. The photocatalytic activity of the SnS2/HAp composite was assessed through the degradation of gentian violet (GV) dye, a representative organic pollutant. Various reaction parameters were optimized to enhance the degradation efficiency, and the photocatalyst's performance was further tested across different water matrices. Under optimal conditions, the SnS2/HAp photocatalyst achieved a maximum photodegradation efficiency of 97.49% with a rate constant of 0.0494 min- 1 for GV dye. Additionally, it exhibited an efficiency greater than 70% against other emerging pollutants via advanced oxidation processes (AOP). The enhanced photocatalytic activity was attributed to the formation of a Z-Scheme heterojunction between SnS2 and HAp, which enhanced the charge separation efficiency and delayed the charge recombination. The study also demonstrated the photocatalyst's remarkable reusability, maintaining high performance over five cycles and across various water environments. This highlights its potential as a sustainable solution for the removal of organic pollutants from aqueous streams. Finally, a Z-scheme electron transport mechanism is proposed to explain the photodegradation process of GV dye using the SnS2/HAp photocatalyst.

SnS2 Nanoparticles Embedded in BiVO4 Surfaces via Eutectic Decomposition for Enhanced Performance in Photoelectrochemical Water Splitting.

BiVO4 has garnered substantial interest as a promising photoanode material for photoelectrochemical water-splitting due to its narrow band gap and appropriate band edge positions for water oxidation. Nevertheless, its practical use has been impeded by poor charge transport and sluggish water oxidation kinetics. Here, a hybrid composite photoanode is fabricated by uniformly embedding SnS2 nanoparticles near the surface of a BiVO4 thin film, creating a type II heterostructure with strong interactions between the nanoparticles and the film for efficient charge separation. This structure forms via eutectic melting during atomic layer deposition of SnS2 with subsequent phase separation between SnS2 and BiVO4 at room temperature, offering greater advantages and flexibilities over conventional exsolution techniques. Furthermore, the SnS2/BiVO4 hybrid composite is coated with a thin amorphous ZnS passivation layer to accelerate charge transfer process and enhance long-term stability. The optimized BiVO4/SnS2/ZnS photoanode exhibits a photocurrent density of 5.44 mA cm-2 at 1.23 V versus RHE, which is 2.73 times higher than that of the BiVO4 photoanode, and a dramatic improvement in photostability retention at 1.23 V versus RHE, increasing from 55% to 91% over 24 hours. This method of anchoring nanoparticles onto host materials proves highly valuable for energy and environmental applications.

A comprehensive study on electron and hole transport layers for designing and optimizing the efficiency of MoSe2-Based solar cells using numerical simulation techniques.

Researchers have recently shown a great deal of interest in molybdenum diselenide (MoSe2)-based solar cells due to their outstanding semiconducting characteristics. However, discrepancies in the band arrangement at the MoSe2/ETL (electron transport layer) and hole transport layer (HTL)/MoSe2 interfaces impede performances. In this research, a device combination with Ag/FTO/ETL/MoSe2/HTL/Ni is employed, where 7 HTLs and 3 different ETLs have been utilized to explore which device arrangement is superior. To achieve the most effective device arrangement, the effects of various device variables, such as thickness, donor density, acceptor density, defect density, temperature, series, and shunt resistance, are optimized. The computational evaluation under AM 1.5 light spectrums (100 mW/cm2) is performed using the SCAPS-1D simulator. When the several device parameters were optimized, the device that was correlated with Ag/FTO/SnS2/MoSe2/V2O5/Ni revealed the highest overall performances among the three different ETL (In2S3, SnS2, ZnSe)-based devices, with measuring a PCE of 34.07 %, a VOC of 0.918 V, a JSC of 42.565 mAcm-2, and an FF of 87.19 %. This recommended MoSe2-based solar cell exhibits outstanding efficiency in terms of maintenance and comparison to numerical thin film solar cells, highlighting MoSe2 as an attractive option for solar energy systems while eliminating toxicity challenges.

Effect of Size Tuning of Hexagonal SnS2 Nanosheet on the Efficiency of Photocatalytic Degradation Processes.

Recent research on SnS2 materials aims to enhance their photocatalytic efficiency for water pollution remediation through doping and constructing heterojunctions. These methods face challenges in cost-effectiveness and practical scalability. This study synthesizes hexagonal SnS2 nanosheets of various sizes via a hydrothermal method, assessing their performance in degrading methyl orange (MO) and reducing hexavalent chromium (Cr(VI)). The results show that smaller SnS2 nanosheets exhibit higher photocatalytic efficiency under sunlight. Specifically, 50 mg of small-sized nanosheets degraded 100 ml of MO (10 mgL-1) in 30 min and reduced Cr(VI) (10 mgL-1) in 105 min. The enhanced performance is attributed to: i) an energy bandgap of 2.17 eV suitable for visible light, and ii) more surface sulfur (S) vacancies in smaller nanosheets, which create electronic states near the Fermi level, reducing electron-hole recombination. This study offers a straightforward strategy for improving 2D materials like SnS2.

Resourceful treatment of complex uranium-organic wastewater by a hybrid tandem photocatalytic fuel cell with SnS2 nanoplate modified carbon felt cathode.

Resourceful treatment of wastewater is a promising way to facilitate sustainable development. Recently, photocatalytic fuel cells (PFCs) have attracted widespread attention as the method that can synchronously achieve wastewater treatment and clean energy production only depend on light. However, few PFCs focused on treating complex uranium (U(VI))-organic wastewater. This study prepared a SnS2 nanoplate decorated carbon felt (SnS2/CF) material by facile hydrothermal method and used as the cathode to construct a hybrid tandem photocatalytic fuel cell (HTPFC) system. Compared to the CF-HTPFC, the removal efficiencies of U(VI) and tetracycline hydrochloride (TCH) increased to 3.4 and 1.8 times in the SnS2/CF-HTPFC system, accompanied with the reaction rate (kobs) values increased to 30.39 and 3.78 times, respectively. More importantly, under real sunlight irradiation (From 10:00 to 16:00), the removal efficiencies of U(VI) and TCH respectively reached 92.49 % and 97.96 %, and the Pmax reached 6.49 mW·cm-2. HTPFC also displayed satisfactory performances in treating radioactive wastewater containing different organic compounds, with the removal efficiencies of U(VI) and organic compounds both exceeded 93.35 %. The loading of SnS2 nanoplates enhanced electrochemical performance and introduced abundant S active sites, allowing more U(VI) to be adsorbed and reduced, and simultaneously promoting the removal of organic matter by improving the charge separation efficiency.

Plasmon-Enhanced Light Absorption Below the Bandgap of Semiconducting SnS2 Microcubes for Highly Efficient Solar Water Evaporation.

Semiconducting materials show high potential for solar energy harvesting due to their suitable bandgaps, which allow the efficient utilization of light energy larger than their bandgaps. However, the photon energy smaller than their bandgap is almost unused, which significantly limits their efficient applications. Herein, plasmonic Pd/SnS2 microcubes with abundant Pd nanoparticles attached to the SnS2 nanosheets are fabricated by an in situ photoreduction method. The as-prepared Pd/SnS2 microcubes extend the light-harvesting ability of SnS2 beyond its cutoff wavelength, which is attributed to the localized surface plasmon resonance (LSPR) effect of the Pd nanoparticles and the 3D structure of the SnS2 microcubes. Pd nanoparticles can also enhance the light absorption of TiO2 nanoparticles and NiPS3 nanosheets beyond their cutoff wavelengths, revealing the universality for promoting absorption above the cutoff wavelength of the semiconductors. When the plasmonic Pd/SnS2 microcubes are integrated into a hydrophilic sponge acting as the solar evaporator, a solar-to-vapor efficiency of up to 89.2% can be achieved under one sun. The high solar-to-vapor conversion efficiency and the broad applicability of extending the light absorption far beyond the cutoff wavelength of the semiconductor comprise the potential of innovative plasmonic nanoparticle/semiconductor composites for solar desalination.

Defect Engineering of MoTe2 via Thiol Treatment for Type III van der Waals Heterojunction Phototransistor.

Molybdenum ditelluride (MoTe2) nanosheets have displayed intriguing physicochemical properties and opto-electric characteristics as a result of their tunable and small band gap (Eg ∼ 1 eV), facilitating concurrent electron and hole transport. Despite the numerous efforts devoted to the development of p-type MoTe2 field-effect transistors (FETs), the presence of tellurium (Te) point vacancies has caused serious reliability issues. Here, we overcome this major limitation by treating the MoTe2 surface with thiolated molecules to heal Te vacancies. Comprehensive materials and electrical characterizations provided unambiguous evidence for the efficient chemisorption of butanethiol. Our thiol-treated MoTe2 FET exhibited a 10-fold increase in hole current and a positive threshold voltage shift of 25 V, indicative of efficient hole carrier doping. We demonstrated that our powerful molecular engineering strategy can be extended to the controlled formation of van der Waals heterostructures by developing an n-SnS2/thiol-MoTe2 junction FET (thiol-JFET). Notably, the thiol-JFET exhibited a significant negative photoresponse with a responsivity of 50 A W-1 and a fast response time of 80 ms based on band-to-band tunneling. More interestingly, the thiol-JFET displayed a gate tunable trimodal photodetection comprising two photoactive modes (positive and negative photoresponse) and one photoinactive mode. These findings underscore the potential of molecular engineering approaches in enhancing the performance and functionality of MoTe2-based nanodevices as key components in advanced 2D-based optoelectronics.

A close-looped DNAzyme walker with an available catalytic domain for electrochemiluminescent detection of acetamiprid.

Traditional DNA walkers face enormous challenges due to limited biostability and reaction kinetics. Herein, we designed a self-driven close-looped DNAzyme walker (cl-DW) with high structural biostability and catalytic activity that enabled rapid electrochemiluminescence (ECL) detection of pesticide residue acetamiprid. Specifically, cl-DW exhibited increasing ability to resist nuclease degradation with a 570-fold longer half-degradation time than that of the single-stranded DNAzyme walker (ss-DW) due to the protected DNA terminal. Furthermore, cl-DW achieved high catalytic activity with a 4.3-fold faster reaction kinetic than that of ss-DW due to the circularized nanostructure of an available catalytic domain. Consequently, we utilized cl-DW as a signal amplifier and tin-based sulfide (SnS2) nanoflowers as ECL emitters to construct an ECL aptasensor, which realized the sensitive detection of acetamiprid with a limit of detection of 0.85 nM. This work provides a reliable approach to exploring DNA walkers with high catalytic activity and better biostability for molecular monitoring.

Hydrophobic-treated yolk-shell SnS2@CSs Z-scheme confinement reactor for solar-electro-driven hydrogen peroxide production in neutral media.

The diffusion and adsorption properties of the O2/H2O corpuscles at active sites play a crucial role in the fast photo-electrocatalytic reaction of hydrogen peroxide (H2O2) production. Herein, SnS2 nanosheets with abundant interfacial boundaries and large specific areas are encapsulated into hollow mesoporous carbon spheres (CSs) with flexibility, producing a yolk-shell SnS2@CSs Z-scheme photocatalyst. The nanoconfined microenvironment of SnS2@CSs could enrich O2/H2O in catalyst cavities, which allows sufficient internal O2 transfer, improving the surface chemistry of catalytic O2 to O2- conversion and increasing reaction kinetics. By shaping the mixture of SnS2@CSs and polytetrafluoroethylene (PTFE) on carbon felt (CF) using the vacuum filtration method, the natural air-breathing gas diffusion photoelectrode (AGPE) was prepared, and it can achieve an accumulated concentration of H2O2 about 12 mM after a 10 h stability test from pure water at natural pH without using electrolyte and sacrificial agents. The H2O2 product is upgraded through one downstream route of conversion of H2O2 to sodium perborate. The improved H2O2 production performance could be ascribed to the combination of the confinement effect of SnS2@CSs and the rich triple phase interfaces with the continuous hydrophobic layer and hydrophilic layer to synergistically modulate the photoelectron catalytic microenvironment, which enhanced the transfer of O2 mass and offered a stronger affinity to oxygen bubbles. The strategy of combining the confined material with the air-breathing gas diffusion electrode equips a wide practical range of applications for the synthesis of high-yield hydrogen peroxide.

A competitive-type photoelectrochemical aptasensor for 17 beta-estradiol detection in microfluidic devices based on a novel Au@Cd:SnO2/SnS2 nanocomposite.

A competitive-type photoelectrochemical (PEC) aptasensor coupled with a novel Au@Cd:SnO2/SnS2 nanocomposite was designed for the detection of 17ß-estradiol (E2) in microfluidic devices. The designed Au@Cd:SnO2/SnS2 nanocomposites exhibit high photoelectrochemical activity owing to the good matching of cascade band-edge and the efficient separation of photo-generated e-/h+ pairs derived from the Cd-doped defects in the energy level. The Au@Cd:SnO2/SnS2 nanocomposites were loaded into carbon paste electrodes (CPEs) to immobilize complementary DNA (cDNA) and estradiol aptamer probe DNA (E2-Apt), forming a double-strand DNA structure on the CPE surface. As the target E2 interacts with the double-strand DNA, E2-Apt is sensitively released from the CPE, subsequently increasing the photocurrent intensity due to the reduced steric hindrance of the electrode surface. The competitive-type sensing mechanism, combined with high PEC activity of the Au@Cd:SnO2/SnS2 nanocomposites, contributed to the rapid and sensitive detection of E2 in a "signal on" manner. Under the optimized conditions, the PEC aptasensor exhibited a linear range from 1.0 × 10-13 mol L-1 to 3.2 × 10-6 mol L-1 and a detection limit of 1.2 × 10-14 mol L-1 (S/N = 3). Moreover, the integration of microfluidic device with smartphone controlled portable electrochemical workstation enables the on-site detection of E2. The small sample volume (10 µL) and short analysis time (40 min) demonstrated the great potential of this strategy for E2 detection in rat serum and river water. With these advantages, the PEC aptasensor can be utilized for point-of-care testing (POCT) in both clinical and environmental applications.

Atomically Engineered Encapsulation of SnS2 Nanoribbons by Single-Walled Carbon Nanotubes for High-Efficiency Lithium Storage.

Rechargeable lithium-ion batteries are integral to contemporary energy storage, yet current anode material systems struggle to meet the increasing demand for extended range capabilities. This work introduces a novel composite anode material composed of one-dimensional 2H-phase tin disulfide (SnS2) nanoribbons enclosed within cavities of single-walled carbon nanotubes (SnS2@SWCNTs), achieved through precise atomic engineering. Employing aberration-corrected transmission electron microscopy, we precisely elucidated the crystal structure of SnS2 within the confines of the SWCNTs. This deliberate design effectively addresses the inherent limitations of SnS2 as a lithium-ion anode material, including its low electrical conductivity, considerable volume expansion effects, and unstable solid electrolyte interface membrane. Testing confirmed that SnS2 transforms into the Li5Sn2 alloy phase after full lithiation and back to SnS2 after delithiation, showing excellent reversibility. The composite also benefits from edge effects, improving lithium storage through stronger binding and lower migration barriers, which were supported by calculations. This pioneering work advances high-performance anode materials for applications.

Filter-Less Color-Selective Photodetector Derived from Integration of Parallel Perovskite Photoelectric Response Units.

Color-selective photodetectors (PDs) play an indispensable role in spectral recognition, image sensing, and other fields. Nevertheless, complex filters and delicate optical paths in such devices significantly increase their complexity and size, which subsequently impede their integration in smart optoelectronic chips for universal applications. This work demonstrates the successful fabrication of filter-less color-selective perovskite PDs by integrating three perovskite units with different photoresponse on a single chip. The variation in photoresponse is attributed to different quantities of SnO2 nanoparticles, synthesized through controlled ultrasonic treatment on the surface of the electron transportation layer SnS2, which selectively absorb short-wavelength light, thus increasing the relative transmittance of long-wavelength light and enhancing the photoresponse of the units to long wavelengths. By integrating any two units and deriving the formula for the wavelength to the responsivity ratio, a wavelength sensor is developed which can accurately identify incident light in the range of 400-700 nm with a minimum error <3 nm. Furthermore, the device integrating three units with different photoresponse can identify red, green and blue in polychromatic light to achieve color imaging with a relative error <6%. This work provides valuable insights into wavelength identification and color imaging of perovskite PDs.

Enhancing photodegradation of thiamethoxam insecticide using SnS2/NCL as a photocatalyst: Mechanistic insights and environmental implications.

The current research highlights the fabrication of a novel SnS2/CO32-@Ni-Co LDH (SnS2/NCL) by precipitating Ni-Co LDH over hydrothermally synthesized SnS2 nanoparticles for the enhanced degradation of thiamethoxam (THM) insecticide through the advanced oxidation process. The effect of several reaction parameters was optimized, and a maximum degradation of 98.1 ± 1.2 % with a rate constant of 0.0541 min-1 of 10 ppm THM was reached at a catalyst loading of 0.16 gL-1 using 0.3 mM of H2O2 within 70 min of visible light irradiation. The effect of metal cations, inorganic anions, dissolved organic matter, organic compounds and water samples on the photodegradation performance of SnS2/NCL nanocomposite was also examined to evaluate the prepared photocatalyst's suitability for use in actual wastewater conditions. The metal cations blocked the active sites of the photocatalyst and reduced the degradation efficiency except for Fe2+ ions, since it is a Fenton reagent and increased the production of hydroxyl radicals. Inorganic anions are the scavengers of hydroxyl radicals and hinder photocatalytic activity. Meanwhile, lake water containing varying degrees of co-existing ions shows the lowest degradation efficiency among other water samples. The SnS2/NCL nanocomposite could be reused for five cycles while maintaining a photocatalytic efficiency of 83.6 ± 0.3 % in the fifth run. The prepared SnS2/NCL nanocomposite also showed excellent photodegradation of several other emerging organic pollutants with an efficiency of over 80 % under optimum conditions. Incorporating Ni-Co LDH with SnS2 helped to delocalize photoinduced charges, leading to increased photocatalytic activity and a slower electron-hole recombination rate. The present research highlights the photocatalytic activity of SnS2/NCL photocatalysts for the photocatalytic degradation of emerging contaminants from wastewater.

Preparation of SnS2/MoS2with p-n heterojunction for NO2sensing.

Conventional metal sulfide (SnS2) gas-sensitive sensing materials still have insufficient surface area and slow response/recovery times. To increase its gas-sensing performance, MoS2nanoflower was produced hydrothermally and mechanically combined with SnS2nanoplate. Extensive characterization results show that MoS2was effectively integrated into SnS2. Four different concentrations of SnS2-MoS2composites were evaluated for their NO2gas sensitization capabilities. Among them, SnS2-15% MoS2at 170 °C demonstrated the greatest response values to NO2, 7.3 for 1 ppm NO2, which is about three times greater than the SnS2sensor at 170 °C (2.58). The creation of pn junctions following compositing with SnS2was determined to be the primary reason for the composite's faster recovery time, while the heterojunction allowed for the rapid separation of hole-electron pairs. Because the MoS2surface has multiple vacancy defects, the adsorption energy of these vacancies is significantly higher than that of other places, resulting in increased NO2adsorption. Furthermore, MoS2can serve as active adsorption sites for SnS2micrometer sheets during gas sensing. This study may help to build new NO2gas sensors.

Interfacial modulation of hollow ZnS-SnS2 microboxs by Ti3C2Tx MXene to construct three-dimensional hybrid anodes for lithium-ion batteries with ultra high stability at low temperature.

Metal sulfides exhibit obvious volume expansion due to the inherent poor conductivity and large temperature fluctuations, leading to reduced storage capacity. Herein, an electrostatic self-assembly strategy was proposed to fabricate a three-dimensional (3D) polyaniline (PANI) encapsulated hollow ZnS-SnS2 (H-ZSS) heterojunction confined on Ti3C2Tx MXene nanosheets (H-ZnS-SnS2@MXene@PANI, denoted as H-ZSSMP), which exhibits remarkable reversible capacity and cyclic stability (520.3 mAh/g at 2 A/g after 1000 cycles) at room temperature. Additionally, specific capacity can stabilized at 362.5 mAh/g for 250 cycles at -20 °C. A full cell with the configuration of H-ZSSMP//lithium iron phosphate (LiFePO4) can retain a satisfactory reversible capacity of 424.7 mAh/g after 100 cycles at 0.1 C. Theory calculations confirm heterogeneous interface can accelerate the transfer of ions through the interfacial regulation effect of MXene on H-ZSS. Our work provides a simple strategy to improve the capacity and stability of lithium-ion batteries (LIBs), as well as the new applications of MXene and bimetallic sulfides as anode materials, which will facilitate the development of MXene based composites for energy storage.

Band Alignment Transition and Enhanced Performance in Vertical SnS2/MoS2 van der Waals Photodetectors.

The strong light-matter interaction and naturally passivated surfaces of van der Waals materials make heterojunctions of such materials ideal candidates for high-performance photodetectors. In this study, we fabricated SnS2/MoS2 van der Waals heterojunctions and investigated their photoelectric properties. Using an applied gate voltage, we can effectively alter the band arrangement and achieve a transition in type II and type I junctions. It is found that the SnS2/MoS2 van der Waals heterostructures are type II heterojunctions when the gate voltage is above -25 V. Below this gate voltage, the heterojunctions become type I. Photoelectric measurements under various wavelengths of incident light reveal enhanced sensitivity in the ultraviolet region and a broadband sensing range from 400 to 800 nm. Moreover, due to the transition from type II to type I band alignment, the measured photocurrent saturates at a specific gate voltage, and this value depends crucially on the bias voltage and light wavelength, providing a potential avenue for designing compact spectrometers.

Defect-Engineered Tin Disulfide Nanocarriers as "Precision-Guided Projectile" for Intensive Synergistic Therapy.

Nanoformulations with endogenous/exogenous stimulus-responsive characteristics show great potential in tumor cell elimination with minimal adverse effects and high precision. Herein, an intelligent nanotheranostic platform (denoted as TPZ@Cu-SnS2-x /PLL) for tumor microenvironment (TME) and near-infrared light (NIR) activated tumor-specific therapy is constructed. Copper (Cu) doping and the resulting sulfur vacancies can not only improve the response range of visible light but also improve the separation efficiency of photogenerated carriers and increase the carrier density, resulting in the ideal photothermal and photodynamic performance. Density functional theory calculations revealed that the introduction of Cu and resulting sulfur vacancies can induce electron redistribution, achieving favorable photogenerated electrons. After entering cells through endocytosis, the TPZ@Cu-SnS2-x /PLL nanocomposites show the pH responsivity property for the release of the TPZ selectively within the acidic TME, and the released Cu2+ can first interact with local glutathione (GSH) to deplete GSH with the production of Cu+ . Subsequently, the Cu+ -mediated Fenton-like reaction can decompose local hydrogen peroxide into hydroxyl radicals, which can also be promoted by hyperthermia derived from the photothermal effect for tumor cell apoptosis. The integration of photoacoustic/computed tomography imaging-guided NIR phototherapy, TPZ-induced chemotherapy, and GSH-elimination/hyperthermia enhanced chemodynamic therapy results in synergistic therapeutic outcomes without obvious systemic toxicity in vivo.

NiCo2O4@SnS2nanosheets on carbon cloth as efficient bi-functional material for high performance supercapacitor and sensor applications.

Bi-functional materials provide an opportunity for the development of high-performance devices. Up till now, bi-functional performance of NiCo2O4@SnS2nanosheets is rarely investigated. In this work, NiCo2O4@SnS2nanosheets were synthesized on carbon cloth by utilizing a simple hydrothermal technique. The developed electrode (NiCo2O4@SnS2/CC) was investigated for the detection of L-Cysteine and supercapacitors applications. As a non-enzymatic sensor, the electrode proved to be highly sensitive for the detection of L-cysteine. The electrode exhibits a reproducible sensitivity of 4645.82µA mM-1cm-2in a wide linear range from 0.5 to 5 mM with a low limit of detection (0.005µM). Moreover, the electrode shows an excellent selectivity and long-time stability. The high specific surface area, enhanced kinetics, good synergy and distinct architecture of NiCo2O4@SnS2nanosheets produce a large number of active sites with substantial energy storage potential. As a supercapacitor, the electrode exhibits improve capacitance of 655.7 F g-1at a current density of 2 A g-1as compare to NiCo2O4/CC (560 F g-1). Moreover, the electrode achieves 95.3% of its preliminary capacitance after 10 000 cycles at 2 A g-1. Our results show that NiCo2O4@SnS2/CC nanosheets possess binary features could be attractive electrode material for the development of non-enzymatic biosensors as well as supercapacitors.

Creation of Interfacial S4-Sn-N2 Electron Pathways for Efficient Light-Driven Hydrogen Evolution.

Establishing effective charge transfer channels between two semiconductors is key to improving photocatalytic activity. However, controlling hetero-structures in situ and designing binding modes pose significant challenges. Herein, hydrolytic SnCl2·2H2O is selected as the metal source and loaded in situ onto a layered carbon nitriden supramolecular precursor. A composite photocatalyst, S4-Sn-N2, with electron pathways of SnS2 and tubular carbon nitriden (TCN) is prepared through pyrolysis and vulcanization processes. The contact interface of SnS2-TCN is increased significantly, promoting the formation of S4-Sn-N2 micro-structure in a Z-scheme charge transfer channel. This structure accelerates the separation and transport of photogenerated carriers, maintains the stronger redox ability, and improves the stability of SnS2 in this series of heterojunctions. Therefore, the catalyst demonstrated exceptional photocatalytic hydrogen production efficiency, achieving a reaction rate of 86.4 µmol h-1, which is 3.15 times greater than that of bare TCN.