Development of a dispersive solid phase microextraction method based on the application of MgAl, NiAl, and CoAl-layered double hydroxides for the efficient removal of α- and ß-naphthol isomers from water samples by capillary electrophoresis.

The present work describes a quick, simple, and efficient method based on the use of layered double hydroxides (LDH) coupled to dispersive solid phase micro-extraction (DSPME) to remove α-naphthol (α-NAP) and ß-naphthol (ß-NAP) isomers from water samples. Three different LDHs (MgAl-LDH, NiAl-LDH, and CoAl-LDH) were used to study how the interlayer anion and molar ratio affected the removal performance. The critical factors in the DSPME procedure (pH, LDH amount, contact time) were optimized by the univariate method under the optimal conditions: pH, 4-8; LDH amount, 5 mg; and contact time, 2.5 min. The method can be successfully applied in real sample waters, removing NAP isomers even in ultra-trace concentrations. The large volume sample stacking (LVSS-CE) technique provides limits of detections (LODs) of 5.52 µg/L and 6.36 µg/L for α-naphthol and ß-naphthol, respectively. The methodology's precision was evaluated on intra- and inter-day repeatability, with %RSD less than 10% in all cases. The MgAl/Cl--LDH selectivity was tested in the presence of phenol and bisphenol A, with a removal rate of >92.80%. The elution tests suggest that the LDH MgAl/Cl--LDH could be suitable for pre-concentration of α-naphthol and ß-naphthol in future works.

Effect of Water Absorption and Stacking Sequences on the Tensile Properties and Damage Mechanisms of Hybrid Polyester/Glass/Jute Composites.

The aim of this work is to analyze the effect of water absorption on the mechanical properties and damage mechanisms of polyester/glass fiber/jute fiber hybrid composites obtained using the compression molding and vacuum-assisted resin transfer molding (VARTM) techniques with different stacking sequences. For this purpose, the mechanical behavior under tensile stress of the samples was evaluated before and after hygrothermal aging at different temperatures: TA, 50 °C, and 70 °C for a period of 696 h. The damage mechanism after the mechanical tests was evaluated using SEM analysis. The results showed a tendency for the mechanical properties of the composites to decrease with exposure to an aqueous ambient, regardless of the molding technique used to conform the composites. It was also observed that the stacking sequence had no significant influence on the dry composites. However, exposure to the aqueous ambient led to a reduction in mechanical properties, both for the molding technique and the stacking sequence. Damage such as delamination, fiber pull-out, fiber/matrix detachment, voids, and matrix removal were observed in the composites in the SEM analyses.

Myristoylated GRASP55 dimerizes in the presence of model membranes.

The Golgi Reassembly and Stacking Proteins (GRASPs) are engaged in various functions within the cell, both in unconventional secretion mechanisms and structuring and organizing the Golgi apparatus. Understanding their specific role in each situation still requires more structural and functional data at the molecular level. GRASP55 is one of the GRASP members in mammals, anchored to the membrane via the myristoylation of a Gly residue at its N-terminus. Therefore, co-translational modifications, such as myristoylation, are fundamental when considering a strategy to obtain detailed information on the interactions between GRASP55 and membranes. Despite its functional relevance, the N-terminal myristoylation has been underappreciated in the studies reported to date, compromising the previously proposed models for GRASP-membrane interactions. Here, we investigated the synergy between the presence of the membrane and the formation of oligomeric structures of myristoylated GRASP55, using a series of biophysical techniques to perform the structural characterization of the lipidated GRASP55 and its interaction with biological lipid model membranes. Our data fulfill an unexplored gap: the adequate evaluation of the presence of lipidations and lipid membranes on the structure-function dyad of GRASPs.Communicated by Ramaswamy H. Sarma.

New copper carboxyl-ate pyrene dimers: synthesis, crystal structure, Hirshfeld surface analysis and electrochemical characterization.

Two new copper dimers, namely, bis-(dimethyl sulfoxide)-tetra-kis-(µ-pyrene-1-carboxyl-ato)dicopper(Cu-Cu), [Cu2(C17H9O2)4(C2H6OS)2] or [Cu2(pyr-COO-)4(DMSO)2] (1), and bis-(di-methyl-formamide)-tetra-kis-(µ-pyrene-1-carboxyl-ato)dicopper(Cu-Cu), [Cu2(C17H9O2)4(C3H7NO)2] or [Cu2(pyr-COO-)4(DMF)2] (2) (pyr = pyrene), were synthesized from the reaction of pyrene-1-carb-oxy-lic acid, copper(II) nitrate and tri-ethyl-amine from solvents DMSO and DMF, respectively. While 1 crystallized in the space group P , the crystal structure of 2 is in space group P21/n. The Cu atoms have octa-hedral geometries, with four oxygen atoms from carboxyl-ate pyrene ligands occupying the equatorial positions, a solvent mol-ecule coordinating at one of the axial positions, and a Cu⋯Cu contact in the opposite position. The packing in the crystal structures exhibits π-π stacking inter-actions and short contacts through the solvent mol-ecules. The Hirshfeld surfaces and two-dimensional fingerprint plots were generated for both compounds to better understand the inter-molecular inter-actions and the contribution of heteroatoms from the solvent ligands to the crystal packing. In addition, a Cu2+/Cu1+ quasi-reversible redox process was identified for compound 2 using cyclic voltammetry that accounts for a diffusion-controlled electron-donation process to the Cu dimer.

Thermodynamic and Ab Initio Design of Multicomponent Alloys Based on (Fe50Mn30Co10Cr10)-xBx (x = 0, 5, 7, 10, and 15 at.%).

Multicomponent alloys have attained general interest in recent years due to their remarkable performance. Non-equiatomic alloys with boron addition as an interstitial element are being studied, exhibiting outstanding mechanical properties. In order to estimate the mechanical behavior of potential alloys, thermodynamic and ab initio calculations were utilized in this work to investigate phase stability and stacking fault energy (SFE) for (Fe50Mn30Co10Cr10)-xBx (x = 0, 5, 7, 10, and 15 at.%) systems. Thermodynamic experiments revealed two structural variations of borides, M2B(C16) with a tetragonal structure and M2B(CB) with an orthorhombic structure. Borides precipitate when boron content increases, and the FCC matrix becomes deficient in Mn and Cr. According to ab initio calculations, the presence of boron in the FCC and HCP structures primarily disrupts the surroundings of the Fe and Mn atoms, resulting in an increased distortion of the crystal lattice. This is related to the antiferromagnetic condition of the alloys. Furthermore, for alloys with a low boron concentration, the stacking fault energy was found to be near 20 mJ/m2 and greater than 50 mJ/m2 when 10 and 15 at.% boron was added. As boron concentrations increase, M2B borides are formed, generating changes in the matrix composition prone to fault-induced phase transitions that could modify and potentially impair mechanical properties.

Conocimiento y manejo de cuidados respiratorios especializados en pacientes con enfermedades neuromusculares en unidades de cuidado intensivo: aproximación por encuesta a profesionales de la salud

Introducción: En las enfermedades neuromusculares la disminución de la capacidad vital se relaciona con dismunición de la capacidad tusígena y luego ventilatoria, la combinación de ambas genera complicaciones graves por falla ventilatoria. En los pacientes que son intubados, limita la extubación, sino se realizan cuidados respiratorios especializados. El conocimiento y aplicación de los profesionales que atienden a estos pacientes en cuidados intensivos resulta esencial. Objetivos: Reportar el conocimiento y aplicación especializada de cuidados respiratorios en enfermedades neuromusculares en las Unidades de Cuidados Intensivos. Materiales y métodos: Estudio cualitativo, descriptivo de corte transversal, no probabilístico, a criterio. La población accesible fueron profesionales de la Salud de las Unidades de Cuidados Intensivos, y el análisis de las respuestas de una encuesta estructurada, enviada a distintos profesionales a nivel mundial. Resultados: Se incluyeron los cuestionarios de 41 profesionales, el 34% de los profesionales reportaron la utilización regular de Asistente Mecánico de la Tos; 22% refirieron la utilización regular de apilamiento de aire; 31% reportaron la utilización regular de Asistencia Ventilatoria No Invasiva, 56.1% de los profesionales afirmaron conocer la diferencia entre Ventilación No Invasiva y Soporte Ventilatorio No Invasivo, 34% de los profesionales refirieron tener formación especializada en el área. Conclusión: Pese a existir una alta proporción de profesionales con conocimiento especializado, un grupo importante no los aplica rutinariamente. La justificación es principalmente por la dificultad de adquisición y financiación de los equipos necesarios.

Introduction: In neuromuscular diseases, the decrease in vital capacity relates to decreased coughing and then ventilatory capacity, the combination of both generating serious complications due to ventilatory failure. In intubated patients, the extubation process is difficult unless specialized respiratory care is provided. The knowledge and treatment application of the professionals who care for these patients in intensive care is of outmost importance. Objectives: Report the knowledge and specialized application of respiratory care in neuromuscular diseases in Intensive Care Units. Materials and methods: Qualitative, descriptive, cross-sectional, non-probabilistic study, at criteria. The accessible population were Health professionals from the Intensive Care Units, and the analysis of the responses of a structured survey, sent to different professionals worldwide. Results: The questionnaires of 41 professionals were included, 34% of the professionals reported the regular use of the Mechanical Cough Assistant; 22% reported the regular use of air stacking; 31% reported the regular use of Non-Invasive Ventilatory Assistance. 56.1% of the professionals stated that they knew the difference between Non-Invasive Ventilation and Non-Invasive Ventilatory Support, 34% of the professionals reported having specialized training in the area. Conclusion: Despite the existence of a high proportion of professionals with specialized knowledge, an important group does not routinely apply them. The justification is mainly due to the difficulty of acquiring and financing the necessary equipment.

Conocimiento y manejo de cuidados respiratorios especializados en pacientes con enfermedades neuromusculares en unidades de cuidado intensivo: aproximación por encuesta a profesionales de la salud / Knowledge and management in specialized respiratory care of patients with neuromuscular diseases in intensive care units: survey to health professionals

Introducción: En las enfermedades neuromusculares la disminución de la capacidad vital se relaciona con disminución de la capacidad tusígena y luego ventilatoria, la combinación de ambas genera complicaciones graves por falla ventilatoria. En los pacientes que son intubados, limita la extubación, sino se realizan cuidados respiratorios especializados. El conocimiento y aplicación de los profesionales que atienden a estos pacientes en cuidados intensivos resulta esencial. Objetivos: Reportar el conocimiento y aplicación especializada de cuidados respiratorios en enfermedades neuromusculares en las Unidades de Cuidados Intensivos. Materiales y métodos: Estudio cualitativo, descriptivo de corte transversal, no probabilístico, a criterio. La población accesible fueron profesionales de la Salud de las Unidades de Cuidados Intensivos, y el análisis de las respuestas de una encuesta estructurada, enviada a distintos profesionales a nivel mundial. Resultados: Se incluyeron los cuestionarios de 41 profesionales, el 34% de los profesionales reportaron la utilización regular de Asistente Mecánico de la Tos; 22% refirieron la utilización regular de apilamiento de aire; 31% reportaron la utilización regular de Asistencia Ventilatoria No Invasiva, 56.1% de los profesionales afirmaron conocer la diferencia entre Ventilación No Invasiva y Soporte Ventilatorio No Invasivo, 34% de los profesionales refirieron tener formación especializada en el área. Conclusión: Pese a existir una alta proporción de profesionales con conocimiento especializado, un grupo importante no los aplica rutinariamente. La justificación es principalmente por la dificultad de adquisición y financiación de los equipos necesarios.

Introduction: In neuromuscular diseases, the decrease in vital capacity relates to decreased coughing and then ventilatory capacity, the combination of both generating serious complications due to ventilatory failure. In intubated patients, the extubation process is difficult unless specialized respiratory care is provided. The knowledge and treatment application of the professionals who care for these patients in intensive care is of outmost importance. Objectives: Report the knowledge and specialized application of respiratory care in neuromuscular diseases in Intensive Care Units. Materials and methods: Qualitative, descriptive, cross-sectional, non-probabilistic study, at criteria. The accessible population were Health professionals from the Intensive Care Units, and the analysis of the responses of a structured survey, sent to different professionals worldwide. Results: The questionnaires of 41 professionals were included, 34% of the professionals reported the regular use of the Mechanical Cough Assistant; 22% reported the regular use of air stacking; 31% reported the regular use of Non-Invasive Ventilatory Assistance. 56.1% of the professionals stated that they knew the difference between Non-Invasive Ventilation and Non-Invasive Ventilatory Support, 34% of the professionals reported having specialized training in the area. Conclusion: Despite the existence of a high proportion of professionals with specialized knowledge, an important group does not routinely apply them. The justification is mainly due to the difficulty of acquiring and financing the necessary equipment.

Photo-Stacking Technique for Neuroanatomical High-Definition Photography and 3-Dimensional Modeling.

BACKGROUND: Three-dimensional (3D) neuroanatomical knowledge is vital in neurosurgery. Technological advances improved 3D anatomical perception, but they are usually expensive and not widely available. The aim of the present study was to provide a detailed description of the photo-stacking technique for high-resolution neuroanatomical photography and 3D modeling. METHODS: The photo-stacking technique was described in a step-by-step approach. The time for image acquisition, file conversion, processing, and final production was measured using 2 processing methods. The total number and file size of images are presented. Measures of central tendency and dispersion report the measured values. RESULTS: Ten models were used in both methods achieving 20 models with high-definition images. The mean number of acquired images was 40.6 (14-67), image acquisition time 51.50 ± 18.8 s, file conversion time 250 ± 134.6 s, processing time 50.46 ± 21.46 s and 41.97 ± 20.84 s, and 3D reconstruction time was 4.29 ± 0.74 s and 3.89 ± 0.60 s for methods B and C, respectively. The mean file size of RAW files is 1010 ± 452 megabyte (MB) and 101.06 ± 38.09 MB for Joint Photographic Experts Group files after conversion. The mean size of the final image means size is 71.9 ± 0.126 MB, and the mean file size of the 3D model means is 37.4 ± 0.516 MB for both methods. The total equipment used was less expensive than other reported systems. CONCLUSIONS: The photo-stacking technique is a simple and inexpensive method to create 3D models and high-definition images that could prove valuable in neuroanatomy training.

Green synthesis of Ag nanoparticles from Argemone mexicana L. leaf extract coated with MOF-5 for the removal of metronidazole antibiotics from aqueous solution.

There are growing concerns about the toxicity of metronidazole (MNZ) antibiotics in wastewater, which must be removed. This study used AgN/MOF-5 (1:3) to investigate the adsorptive removal of MNZ antibiotics from wastewater. Green synthesis of Ag-nanoparticles was from Argemone mexicana leaf aqueous extract blended with the synthesized MOF-5 in 1:3 by proportion. The adsorption materials were characterized by scanning electron microscope (SEM), N2 adsorption-desorption analysis, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The surface area increased due to the appearance of micropores. Besides, the efficiency of AgN/MOF-5 (1:3) for MNZ removal was evaluated by adsorption properties, including key influential parameters (adsorbent dosage, pH, contact time, etc.) and adsorption mechanism, kinetics/isotherms. The results from the adsorption process conformed to pseudo-second-order kinetics (R2 = 0.998) and well fitted with the Langmuir isotherm having 191.1 mg/g maximum adsorption capacity. The adsorption mechanism of AgN/MOF-5 (1:3) was due to the interactions of π-π stacking, Ag-N-MOF covalent bonding and hydrogen bonding. Thus, AgN/MOF-5 (1:3) is a potential adsorbent for the removal of aqueous MNZ. The adsorption process is endothermic, spontaneous, and feasible based on the obtained thermodynamic parameter of ΔHO and ΔSO having 14.72 and 0.129 kJ/mol respectively.

Solvatochromism and solution π-stacking of N-(4-pyridyl)-1,8-naphthalimide and its corresponding triruthenium coordination complex.

Due to the scarcity of spectroscopic studies on metal-coordinated naphthalimides, and aiming to investigate fundamental spectroscopic aspects, we have described here the aggregates of N-(4-pyridyl)-1,8-naphthalimide (NI-py) in solution as well as solvatochromism displayed by it and by the coordination compounds [Ru3O(CH3COO)6(NI-py)3]n, n = +1 or 0. Based both on theoretical calculations and luminescence spectra, we demonstrated that in aqueous media, the NI-py π-stacking is thermodynamically favored, suggesting a preferable conformation where the pyridine and naphthalene moieties of two NI-py molecules are parallel to each other, but are not co-planar within an individual molecule, due to steric hindrance. The NI-py ππ* band displayed positive solvatochromism, to which the major contribution was the Catalan's SP parameter (solvent polarizability). This observation is fully consistent with the extended π-electron cloud of the NI-py naphthalene ring. However, a secondary contribution of the SA (solvent acidity) was also observed, owing to the electron pairs available at the N-heteroatom of the pyridine rings and at the carbonyl-group oxygen atoms. Finally, the multiparametric solvent effect analysis indicated that the electronic coupling between coordinated NI-py and the metallic core is modulated by the charge of the [Ru3O(CH3COO)6] core, being higher for the reduced species [Ru3O(CH3COO)6(NI-py)]0. In addition, in this reduced species, there is no overlap between NI-py ππ* and the [Ru3O(CH3COO)6] charge transfer (CT) transitions, leading to the observation of the dependence of the CT energy with the SdP parameter (solvent dipolarity) since the CT transition implies in a charge-separation state.

A three-step pathway from (2-aminophenyl)chalcones to novel styrylquinoline-chalcone hybrids: synthesis and spectroscopic and structural characterization of three examples.

Three new styrylquinoline-chalcone hybrids have been synthesized using a three-step pathway starting with Friedländer cyclocondensation between (2-aminophenyl)chalcones and acetone to give 2-methyl-4-styrylquinolines, followed by selective oxidation to the 2-formyl analogues, and finally Claisen-Schmidt condensation between the formyl intermediates and 1-acetylnaphthalene. All intermediates and the final products have been fully characterized by IR and 1H/13C NMR spectroscopy, and by high-resolution mass spectrometry, and the three products have been characterized by single-crystal X-ray diffraction. The molecular conformations of (E)-3-{4-[(E)-2-phenylethenyl]quinolin-2-yl}-1-(naphthalen-1-yl)prop-2-en-1-one, C30H21NO, (IVa), and (E)-3-{4-[(E)-2-(4-fluorophenyl)ethenyl]quinolin-2-yl}-1-(naphthalen-1-yl)prop-2-en-1-one, C30H20FNO, (IVb), are very similar. In each compound, the molecules are linked into a three-dimensional array by hydrogen bonds, of the C-H...O and C-H...N types in (IVa), and of the C-H...O and C-H...π types in (IVb), and by two independent π-π stacking interactions. By contrast, the conformation of the chalcone unit in (E)-3-{4-[(E)-2-(2-chlorophenyl)ethenyl]quinolin-2-yl}-1-(naphthalen-1-yl)prop-2-en-1-one, C30H20ClNO, (IVc), differs from those in (IVa) and (IVb). There are only weak hydrogen bonds in the structure of (IVc), but a single rather weak π-π stacking interaction links the molecules into chains. Comparisons are made with some related structures.

In vivo observation of amyloid-like fibrils produced under stress.

The participation of amyloids in neurodegenerative diseases and functional processes has triggered the quest for methods allowing their direct detection in vivo. Despite the plethora of data, those methods are still lacking. The autofluorescence from the extended ß-sheets of amyloids is here used to track fibrillation of S. cerevisiae Golgi Reassembly and Stacking Protein (Grh1). Grh1 has been implicated in starvation-triggered unconventional protein secretion (UPS), and here its participation also in heat shock response (HSR) is suggested. Fluorescence Lifetime Imaging (FLIM) is used to detect fibril autofluorescence in cells (E. coli and yeast) under stress (starvation and higher temperature). The formation of Grh1 large complexes under stress is further supported by size exclusion chromatography and ultracentrifugation. The data show for the first time in vivo detection of amyloids without the use of extrinsic probes as well as bring new perspectives on the participation of Grh1 in UPS and HSR.

The Special Case of the Spectral Emission of a Tb3+ Mono Metal Complex.

The fine structure in the spectral lines of the visible fluorescence of Tb3+ complexes are replaced by a single peak in the case of a singular molecular complex Tb(H3 PTC)3 , where H4 PTC represents perylene-3,4,9,10-tetracarboxylic acid, and its emission wavelength depends on the film thickness. This single peak challenges the old creed that the f-orbital electrons of Tb3+ are always protected from the influence of the surrounding atoms. We perform density functional theory calculations to show that the wavefunction of the ground state is localized and in addition, spin-polarized, and this facilitates fluorescent transitions under UV to the first excited state instead of the fundamental state. We discuss the possibility of making a spintronic device with the molecule, Tb(H3 PTC)3 .

Role of the Anilinium Ion on the Selective Polymerization of Anilinium 2-Acrylamide-2-methyl-1-propanesulfonate.

The development of anilinium 2-acrylamide-2-methyl-1-propanesulfonate (Ani-AMPS) monomer, confirmed by 1H NMR, 13C NMR, and FTIR, is systematically studied. Ani-AMPS contains two polymerizable functional groups, so it was submitted to selective polymerization either by free-radical or oxidative polymerization. Therefore, poly(anilinium 2-acrylamide-2-methyl-1-propanesulfonic) [Poly(Ani-AMPS)] and polyaniline doped with 2-acrylamide-2-methyl-1-propanesulfonic acid [PAni-AMPS] can be obtained. First, the acrylamide polymer, poly(Ani-AMPS), favored the π-stacking of the anilinium group produced by the inter- and intra-molecular interactions and was studied utilizing 1H NMR, 13C NMR, FTIR, and UV-Vis-NIR. Furthermore, poly(Ani-AMPS) fluorescence shows quenching in the presence of Fe2+ and Fe3+ in the emission spectrum at 347 nm. In contrast, the typical behavior of polyaniline is observed in the cyclic voltammetry analysis for PAni-AMPS. The optical properties also show a significant change at pH 4.4. The PAni-AMPS structure was corroborated through FTIR, while the thermal properties and morphology were analyzed utilizing TGA, DSC (except PAni-AMPS), and FESEM.

Olfactory response of Trichogramma pretiosum (Hymenoptera: Trichogrammatidae) to volatiles induced by transgenic maize.

Plants not only respond to herbivorous damage but adjust their defense system after egg deposition by pest insects. Thereby, parasitoids use oviposition-induced plant volatiles to locate their hosts. We investigated the olfactory behavioral responses of Trichogramma pretiosum Riley, 1879 (Hymenoptera: Trichogrammatidae) to volatile blends emitted by maize (Zea mays L.) with singular and stacked events after oviposition by Spodoptera frugiperda Smith, 1797 (Hymenoptera: Trichogrammatidae) moths. Additionally, we examined possible variations in gene expression and on oviposition-induced volatiles. We used a Y-tube olfactometer to test for the wasp responses to volatiles released by maize plants oviposited by S. frugiperda and not-oviposited plants. Using the real-time PCR technique (qRT-PCR), we analyzed the expression of lipoxygenase and three terpene synthases genes, which are enzymes involved in the synthesis of volatile compounds that attract parasitoids of S. frugiperda. Olfactometer tests showed that T. pretiosum is strongly attracted by volatiles from transgenic maize emitted by S. frugiperda oviposition (VTPRO 3, more than 75% individuals were attracted). The relative expression of genes TPS10, LOX e STC was higher in transgenic hybrids than in the conventional (isogenic line) hybrids. The GC-MS analysis revealed that some volatile compounds are released exclusively by transgenic maize. This study provides evidence that transgenic hybrids enhanced chemical cues under oviposition-induction and helped to increase T. pretiosum efficiency in S. frugiperda control. This finding shows that among the evaluated hybrids, genetically modified hybrids can improve the biological control programs, since they potentialize the egg parasitoid foraging, integrating pest management.

Rehabilitación respiratoria para pacientes con distrofia muscular de Duchenne en etapas de pérdida de la marcha / Respiratory rehabilitation for patients with Duchenne muscular dystrophy in stages of loss of gait

Duchenne muscular dystrophy (DMD) is one of the most common neuromuscular diseases. Its evolution with well-defined stages related to motor and functional alterations, allows easily establishing relationships with respiratory function through a simple laboratory assessment including vital capacity (VC) measurements as well as peak cough flows. Without any treatment with respiratory rehabilitation, the main cause of morbidity and mortality is ventilatory failure, secondary to respiratory pump muscles weakness and inefficient cough. The VC plateau is reached during the non-ambulatory stages, generally after 13 years old. Respiratory rehabilitation protocols, including air stacking techniques, manual and mechanical assisted coughing and non-invasive ventilatory support, can effectively addressed the VC decline as well as the decrease in peak cough flows, despite advancing to stages with practically non-existent lung capacity. Non-invasive ventilatory support may be applied after 19 years old, initially at night and then extending it during the day. In this way, survival is prolonged, with good quality of life, avoiding ventilatory failure, endotracheal intubation and tracheostomy. This article proposes staggered interventions for respiratory rehabilitation based on the functional stages expected in the patient with DMD who has lost ambulation.

La distrofia muscular de Duchenne (DMD) es una de las enfermedades neuromusculares más frecuentes. Su curso evolutivo con etapas de declinación en la funcionalidad motora bien definidas, permite fácilmente establecer relaciones con la función respiratoria a través de un laboratorio de evaluación sencilla, básicamente de la capacidad vital (CV) y la capacidad tusígena. Sin intervenciones en rehabilitación respiratoria, la principal causa de morbimortalidad es la insuficiencia ventilatoria secundaria a debilidad de músculos de la bomba respiratoria e ineficiencia de la tos. En las etapas no ambulantes, se alcanza la meseta de la CV, generalmente después de los 13 años, su declinación junto con la disminución de la capacidad tusígena puede ser enfrentada efectivamente con la utilización de protocolos de rehabilitación respiratoria. Estos deben considerar la restitución de la CV con técnicas de insuflación activa o apilamiento de aire, tos asistida manual y mecánica, más soporte ventilatorio no invasivo, inicialmente nocturno después de los 19 años y luego diurno, pese a avanzar a etapas con capacidad pulmonar prácticamente inexistente. De esta manera, se prolonga la sobrevida, con buena calidad de vida, evitando el fallo ventilatorio, eventos de intubación endotraqueal y traqueostomía. Este artículo, hace propuestas escalonadas de intervención en rehabilitación respiratoria basadas en las etapas funcionales esperables en el paciente con DMD que ha perdido la capacidad de marcha.

Dinuclear copper(II) complexes with derivative triazine ligands as biomimetic models for catechol oxidases and nucleases.

The research reported herein focuses on the synthesis of two new Cu(II) complexes {[Cu2(2-X-4,6-bis(di-2-picolylamino)-1,3,5-triazine], with X = butane-1,4-diamine (2) or N-methylpyrenylbutane-1,4-diamine (3)}, the latter with a pyrene group as a possible DNA intercalating agent. The structure of complex (3) was determined by X-ray crystallography and shows the dinuclear {CuII(µ-OCH3)2CuII} unit in which the CuII···CuII distance of 3.040 Å is similar to that of 2.97 Å previously found for 1, which contains a {CuII(µ-OH)2CuII} structural unit. Complexes (2) and (3) were also characterized in spectroscopic and electrochemical studies, and catecholase-like activity were performed for both complexes. The kinetic parameters obtained for the oxidation of the model substrate 3,5-di-tert-butylcatechol revealed that the insertion of the spacer butane-1,4-diamine and the pyrene group strongly contributes to increasing the catalytic efficiency of these systems. In fact, Kass becomes significantly higher, indicating that these groups influence the interaction between the complex and the substrate. These complexes also show DNA cleavage under mild conditions with moderate reaction times. The rate of cleavage (kcat) indicated that the presence of butane-1,4-diamine and pyrene increased the activity of both complexes. The reaction mechanism seems to have oxidative and hydrolytic features and the effect of DNA groove binding compounds and circular dichroism indicate that all complexes interact with plasmid DNA through the minor groove. High-resolution DNA cleavage assays provide information on the interaction mechanism and for complex (2) a specificity for the unpaired hairpin region containing thymine bases was observed, in contrast to (3).

The exquisite structural biophysics of the Golgi Reassembly and Stacking Proteins.

Golgi Reassembly and Stacking Proteins (GRASPs) were firstly described as crucial elements in determining the structure of the Golgi complex. However, data have been accumulating over the years showing GRASPs can participate in various cell processes beyond the Golgi maintenance, including cell adhesion and migration, autophagy and unconventional secretion of proteins. A comprehensive understanding of the GRASP functions requires deep mechanistic knowledge of its structure and dynamics, especially because of the unique structural plasticity observed for many members of this family coupled with their high promiscuity in mediating protein-protein interactions. Here, we critically review data regarding the structural biophysics of GRASPs in the quest for understanding the structural determinants of different functionalities. We dissect GRASP structure starting with the full-length protein down to its separate domains (PDZ1, PDZ2 and SPR) and outline some structural features common to all members of the GRASP family (such as the presence of many intrinsically disordered regions). Although the impact of those exquisite properties in vivo will still require further studies, it is possible, from our review, to pinpoint factors that must be considered in future interpretation of data regarding GRASP functions, thus bringing somewhat new perspectives to the field.

Biophysical characterization of intrinsically disordered human Golgi matrix protein GRASP65.

Golgi Reassembly and Stacking Proteins (GRASPs), including GRASP65/GRASP55, were firstly found as stacking factors of Golgi cisternae. Their involvement in other processes, such as unconventional protein secretion (UPS), have been demonstrated, suggesting GRASPs act as interaction hubs. However, structural details governing GRASP functions are not understood thoroughly. Here, we explored the structural features of human cis-Golgi GRASP65 in aqueous solution and compared them with those from trans-Golgi GRASP55. Besides their distinct Golgi localization, GRASP65/55 also seem to be selectively recruited to mitosis-related events or to UPS. Despite preserving the monomeric form in solution seen for GRASP55, as inferred from our SEC-MALS and DLS data, GRASP65 exhibited higher intrinsic disorder and susceptibility to denaturant than GRASP55 (disorder prediction, urea denaturation and circular dichroism data). Moreover, spectroscopic and microscopic studies showed for GRASP65 the same temperature-dependent amorphous aggregation and time-dependent amyloid fibrillation at 37 °C seen for GRASP55. In the latter case, however, GRASP65 presented a lower aggregation rate than GRASP55. The present and previous data evidenced that intrinsic disorder and formation of higher-order oligomers, such as amyloid fibrils, are common features within GRASP family potentially impacting the protein's participation in cell processes.

15N NMR Shifts of Eumelanin Building Blocks in Water: A Combined Quantum Mechanics/Statistical Mechanics Approach.

Theoretical results for the magnetic shielding of protonated and unprotonated nitrogens of eumelanin building blocks including monomers, dimers, and tetramers in gas phase and water are presented. The magnetic property in water was determined by carrying out Monte Carlo statistical mechanics sampling combined with quantum mechanics calculations based on the gauge-including atomic orbitals approach. The results show that the environment polarization can have a marked effect on nitrogen magnetic shieldings, especially for the unprotonated nitrogens. Large contrasts of the oligomerization effect on magnetic shielding show a clear distinction between eumelanin building blocks in solution, which could be detected in nuclear magnetic resonance experiments. Calculations for a π-stacked structure defined by the dimer of a tetrameric building block indicate that unprotonated N atoms are significantly deshielded upon π stacking, whereas protonated N atoms are slightly shielded. The results stress the interest of NMR experiments for a better understanding of the eumelanin complex structure.