Effects of different slopes on hip and ankle biomechanics of replaced and non-replaced limbs of patients with total knee arthroplasty during incline ramp walking.

Although knee biomechanics has been examined, hip and ankle biomechanics in incline ramp walking has not been explored for patients with total knee arthroplasty (TKA). The purpose of this study was to investigate the hip and ankle joint kinematic and kinetic biomechanics of different incline slopes for replaced limbs and non-replaced limbs in individuals with TKA compared to healthy controls. Twenty-five patients with TKR and ten healthy controls performed walking trials on four slope conditions of level (0°), 5°, 10° and 15° on a customized instrumented ramp system. A 3x4 (limb x slope) repeated analysis of variance was used to evaluate selected variables. The results showed a greater peak ankle dorsiflexion angle in the replaced limbs compared to healthy limbs. No significant interactions or limb main effect for other ankle and hip variables. The peak dorsiflexion angle, eversion angle and dorsiflexion moment were progressively higher in each comparison from level to 15°. The peak plantarflexion moment was also increased with each increase of slopes. Both the replaced and non-replaced limbs of patients with TKA had lower hip flexion moments than the healthy control limbs. Hip angle at contact and hip extension range of motion increased with each increase of slopes. Peak hip loading-response internal extension moment increased with each increase in slope and peak hip push-off internal flexion moment decreased with each increase of slope. Our results showed increased dorsiflexion in replaced limbs but no other compensations of hip and ankle joints of replaced limbs compared to non-replaced limbs and their healthy controls during incline walking, providing further support of using incline walking in rehabilitation for patients with TKA.

Comparison of Clinical and Radiological Outcomes of Total Knee Arthroplasty in Osteoarthritic Patients.

Background The knee is the joint most commonly affected by osteoarthritis, more than any other. Osteoarthritis is a progressive, long-term condition that leads to the deterioration of joint tissue and cartilage, resulting in pain and impairment. Total knee arthroplasty (TKA) is a successful intervention that improves functional capability, decreases pain, and enhances quality of life. We conducted this study to evaluate whether radiological parameters following TKA influence the clinical outcomes of patients with knee osteoarthritis. Methods The study was conducted on patients treated for knee osteoarthritis at the Department of Orthopedics, Rajindra Hospital and Government Medical College, Patiala, Punjab, in collaboration with the Department of Radiology over a period of 1.5 years. A total of 152 patients diagnosed with knee osteoarthritis were included in the study; all underwent TKA. Patients underwent clinical evaluation and were graded using the Knee Society Score (KSS) during follow-up examinations. Pain was evaluated using the Visual Analog Scale (VAS). Postoperative X-rays were obtained, and various angles, including the distal femoral angle (DFA), the proximal tibial angle (PTA), and the posterior slope angle (PSA), were measured. Patient follow-up was conducted at three days, three months, and six months. Subsequently, a comparison of the clinical and radiological outcomes of TKA was performed. Results In this study, a total of 152 patients participated, with the majority falling into the 61-70 age group. Of these patients, 40.13% were female and 59.87% were male. The average medial DFA was 94.05°, the average medial PTA was 89.31°, and the PSA was 6.6°. Patients with a medial DFA of 94.05° (±3), a medial PTA of 89.31° (±3), and a PSA of 6.6° (±3) were categorized into the normal group. Conclusion Patients with DFA, PTA, and PSA in the normal range demonstrate improved KSS and clinical outcomes.

Evaluation of Patella Anatomy for Total Knee Arthroplasty Approaches.

BACKGROUND: The patella, or kneecap, is a sesamoid bone situated deep to the fascia latae and the tendinous fibers of the rectus femoris. The medial and lateral facets of the patella articulate with the medial and lateral condyles of the femur, respectively, to form the patellofemoral component of the knee joint. When joint cartilage is destroyed due to osteoarthritis, inflammatory arthritis, post-traumatic degenerative joint disease, or osteonecrosis/joint collapse with cartilage loss, a surgical treatment called knee arthroplasty, or total knee arthroplasty (TKA), is used to rebuild the knee joint. OBJECTIVES: The purpose of our study is to provide a detailed morphometric analysis of the human patella. METHODS: A total of 168 patellae (86 left, 82 right) were examined. Eleven parameters were determined to evaluate patella morphometry, and the bones were also evaluated with the Wiberg classification. RESULT: Type I patella was observed in 13 samples (7.74%); 109 (64.88%) and 46 (27.38%) were Type II and Type III, respectively. In the statistical analysis, significant differences were found between the right and left patellae in terms of patellar thickness, vertical ridge length, and Wiberg angle (p<0.05). There were also significant differences between the Wiberg types and the medial articular width and lateral articular width (p<0.05). CONCLUSION: In order to avoid potential difficulties during knee surgery, it is crucial to understand the typical morphological and morphometric properties of the patella. We believe that this study will be useful to surgeons who perform surgical approaches to the knee and to clinicians who evaluate the diseases of the region.

A Digital Health Intervention Platform (Active and Independent Management System) to Enhance the Rehabilitation Experience for Orthopedic Joint Replacement Patients: Usability Evaluation Study.

BACKGROUND: Optimal rehabilitation programs for orthopedic joint replacement patients ensure faster return to function, earlier discharge from hospital, and improved patient satisfaction. Digital health interventions show promise as a supporting tool for re-enablement. OBJECTIVE: The main goal of this mixed methods study was to examine the usability of the AIMS platform from the perspectives of both patients and clinicians. The aim of this study was to evaluate a re-enablement platform that we have developed that uses a holistic systems approach to address the de-enablement that occurs in hospitalized inpatients, with the older adult population most at risk. The Active and Independent Management System (AIMS) platform is anticipated to deliver improved patient participation in recovery and self-management through education and the ability to track rehabilitation progression in hospital and after patient discharge. METHODS: Two well-known instruments were used to measure usability: the System Usability Scale (SUS) with 10 items and, for finer granularity, the User Experience Questionnaire (UEQ) with 26 items. In all, 26 physiotherapists and health care professionals evaluated the AIMS clinical portal; and 44 patients in hospital for total knee replacement, total hip replacement, or dynamic hip screw implant evaluated the AIMS app. RESULTS: For the AIMS clinical portal, the mean SUS score obtained was 82.88 (SD 13.07, median 86.25), which would be considered good/excellent according to a validated adjective rating scale. For the UEQ, the means of the normalized scores (range -3 to +3) were as follows: attractiveness=2.683 (SD 0.100), perspicuity=2.775 (SD 0.150), efficiency=2.775 (SD 0.130), dependability=2.300 (SD 0.080), stimulation=1.950 (SD 0.120), and novelty=1.625 (SD 0.090). All dimensions were thus classed as excellent against the benchmarks, confirming the results from the SUS questionnaire. For the AIMS app, the mean SUS score obtained was 74.41 (SD 10.26), with a median of 77.50, which would be considered good according to the aforementioned adjective rating scale. For the UEQ, the means of the normalized scores were as follows: attractiveness=2.733 (SD 0.070), perspicuity=2.900 (SD 0.060), efficiency=2.800 (SD 0.090), dependability=2.425 (SD 0.060), stimulation=2.200 (SD 0.010), and novelty=1.450 (0.260). All dimensions were thus classed as excellent against the benchmarks (with the exception of novelty, which was classed as good), providing slightly better results than the SUS questionnaire. CONCLUSIONS: The study has shown that both the AIMS clinical portal and the AIMS app have good to excellent usability scores, and the platform provides a solid foundation for the next phase of research, which will involve evaluating the effectiveness of the platform in improving patient outcomes after total knee replacement, total hip replacement, or dynamic hip screw.

Comparison of bilateral cementless total knee arthroplasty results between patients in different BMI groups.

INTRODUCTION: The aim of this study was to compare the results of cementless bilateral total knee arthroplasty (TKA) between individuals in different obesity groups. MATERIALS AND METHODS: This was a retrospective cohort study. Patients with a body mass index (BMI) greater than 25 who underwent bilateral TKA for gonarthrosis between 2014 and 2020 and completed a minimum follow-up of 24 months were included. Age, sex, height, weight, BMI, operation time, length of stay, patient satisfaction, knee scores and complications were compared. Patients with missing data, who were followed for less than 24 months or had postoperative fractures around the knee were excluded. RESULTS: There was a significant difference between the groups in terms of operation time (Class III > overweight > Class II > Class I p < 0.001). There was a significant difference in complications between the groups (Class III > Class I > Class II > overweight p = 0.010). According to our pairwise comparison, complications were more common in the class III group than in the overweight group. Knee score (KS) and function score (FS) increased significantly after surgery in all groups (p < 0.001), with no difference in FS (p = 0.448). Knee score changes were greater in the overweight and class I groups (p < 0.001). There was a significant interaction between both KS and FS and person satisfaction (p < 0.001). CONCLUSION: Cementless TKA improved KS and FS in all obesity groups, yielded high patient satisfaction. Although the incidence of complications was higher in the morbidly obese patients than in the overweight patients, the difference was not significant. Patients with morbid obesity should be informed about related risks before planning cementless TKA.

Comparison of imageless robotic assisted total knee arthroplasty and conventional total knee arthroplasty: early clinical and radiological outcomes of 200 knees.

The aim of this study was to compare the short term clinical and radiological outcomes of imageless robotic and conventional total knee arthroplasty (TKA) and to estimate the accuracy of the two techniques by analysing the outliers after TKA. We have evaluated 200 consecutive knees (158 patients), 100 knees undergoing robotic TKA, and 100 knees treated with conventional TKA. Demographic parameters like age, gender, body mass index, diagnosis and range of motion were obtained. Knee society score (KSS) and Knee society functional score (KSS-F) were used for clinical evaluation. Mechanical alignment (Hip-knee-ankle angle), proximal tibial angle (MPTA), distal femoral angle (LDFA) and tibial slope were analysed for radiological results and outliers were compared between both groups. Outliers were defined when the measured angle exceeded ± 3° from the neutral alignment in each radiological measurement on the final follow-up radiograph.The minimum follow-up was 6 months (range, 6 to 18 months). The preoperative mean HKA angle was 169.7 ± 11.3° in robotic group and 169.3 ± 7.3° in conventional group. There was significant improvement in HKA, LDFA, MPTA and tibial slope compared to the preoperative values in both the groups (p < 0.01). The number of HKA, LDFA and tibial slope outliers were 31, 29 and 37, respectively, in the conventional group compared to 13, 23 and 17 in the robotic group (p < 0.01). There was a significant improvement in the KSS and KSS-F functional scores postoperatively in both the groups (p < 0.01). However, there was no significant difference in the functional scores between the groups postoperatively (p = 0.08). This study showed excellent improvement with both imageless robotic and conventional TKA, with similar clinical outcomes between both groups. However, radiologically robotic TKA showed better accuracy and consistency with fewer outliers compared with conventional TKA.

A Gender-Bias-Mitigated, Data-Driven Precision Medicine System to Assist in the Selection of Biological Treatments of Grade 3 and 4 Knee Osteoarthritis: Development and Preliminary Validation of precisionKNEE.

Objective To identify key variables predictive of patient responses to microfragmented adipose tissue (MFAT) treatment in knee osteoarthritis (KOA) and evaluate its potential to delay or mitigate the need for total knee replacement (TKR). Methods We utilised a dataset comprising 329 patients treated with MFAT for KOA, incorporating variables such as gender, age, BMI, arthritic aetiology, radiological grade, and Oxford Knee Scores (OKS) pre- and post-treatment. We employed random forest regressors for model training and testing, with gender bias mitigation and outlier detection to enhance prediction accuracy. Model performance was assessed through root mean squared error (RMSE) and mean absolute error (MAE), with further validation in a TKR-suitable patient subset. Results The model achieved a test RMSE of 6.72 and an MAE of 5.38, reflecting moderate predictive accuracy across the patient cohort. Stratification by gender revealed no statistically significant differences between actual and predicted OKS improvements (p-values: males = 0.93, females = 0.92). For the subset of patients suitable for TKR, the model presented an increased RMSE of 9.77 and MAE of 7.81, indicating reduced accuracy in this group. The decision tree analysis identified pre-operative OKS, radiological grade, and gender as significant predictors of post-treatment outcomes, with pre-operative OKS being the most critical determinant. Patients with lower pre-operative OKS showed varying responses based on radiological severity and gender, suggesting a nuanced interaction between these factors in determining treatment efficacy. Conclusion This study highlights the potential of MFAT as a non-surgical alternative for KOA treatment, emphasising the importance of personalised patient assessments. While promising, the predictive model warrants further refinement and validation with a larger, more diverse dataset to improve its utility in clinical decision-making for KOA management.

Measuring Parallelism to the Ground in Bipedal Stance Phase: Mechanical Versus Kinematic Alignment in Total Knee Arthroplasty.

Introduction The goal of total knee arthroplasty is to replace diseased cartilage and bone with an artificial implant to improve the patient's quality of life. The knee has historically been reconstructed to the patient's mechanical axis (MA). However, kinematically aligned techniques have been increasingly used. Kinematic alignment requires less soft-tissue resection and aligns the knee with what is anatomically natural to the patient, while there is concern that kinematically aligned knees will lead to earlier failure due to potential unequal weight distribution on the implant. The purpose of this study is to compare the parallelism from the floor of the joint-line cuts using kinematic and mechanical alignment and understand if the MA is a proper estimation of the tibial-ankle axis (TA). Methods A retrospective study was conducted by recruiting all high tibial osteotomy and distal femoral osteotomy recipients operated on by two surgeons in two MedStar Health hospitals from 01/2013 to 07/2020 with full-length films in preparation for restorative procedures. Baseline osteoarthritis was graded using the Kellgren-Lawrence classification system with all patients presenting as Grade 0. The TA and the joint-line orientations of the MA and kinematic axis (KA) were measured on 66 legs. The average distance from parallelism to the ground was compared between the MA and the KA and between the MA and the TA using a paired t-test. Results KA joint-line orientation (1.705° deviation) was more parallel to the floor in the bipedal stance phase than the MA (2.316° deviation, p=0.0156). The MA (2.316° deviation) was not a proper estimation of the TA (4.278° deviation, p=0.0001). Conclusion By utilizing the KA technique, the restoration of the natural joint line, as well as a joint that is more parallel to the floor in the stance phase compared to the MA, is achieved. The parallelism to the ground of the KA during the bipedal stance phase suggests an even load distribution across the knee. In addition, due to its similarity to the KA and anatomical significance in weight-bearing distribution, further investigation into the hip-to-calcaneal axis as an approximation of the joint line is warranted.

Effect of preservation of Hoffa's fat pad on patellar height in primary total knee arthroplasty procedures.

BACKGROUND: We have previously reported our experience of the effect of complete excision of Hoffa's fat pad on patella height post TKR. In this study, we compared the change of patellar height post TKR before and after the senior author changed his practice to preserving Hoffa's fat pad. METHODS: This was a retrospective analysis of a prospective series of TKRs performed or directly supervised by the senior author. In Group 1 were 72 patients performed before April 2011 who had complete excision of Hoffa's fat pad to maximise exposure during the procedure. In Group 2 were 138 patients performed after April 2011 who had the minimum excision of Hoffa's fat pad to allow adequate surgical exposure. The surgical technique and rehabilitation protocol were identical in all other respects. Patellar height was assessed using the Caton-Deschamps Index both immediately postoperative and at a minimum follow up of 1 year. RESULTS: Group 1 included 28 males, 44 females with mean age 68.36 years. The mean CDI in this group changed from 0.54 immediately post-operatively to 0.46 at minimum one year follow-up (P = 0.001) indicating progressive patella baja. Group 2 included 56 males, 82 females with mean age 65 years. The mean CDI changed from 0.67 immediately post-operative to 0.68 at minimum one year post follow-up (P = 0.32) indicating no statistically or clinically relevant post-operative change in patellar height. CONCLUSION: Total excision of Hoffa's fat pad is associated with progressive post-operative patella baja. This can be avoided by resecting the minimum amount of fat pad to allow adequate exposure during the procedure.

Arriving at SKINTED (Surgery of the Knee, Injury to the Infrapatellar Branch of the Saphenous Nerve, Traumatic Eczematous Dermatitis): A Case Report.

Surgery of the knee, injury to the infrapatellar branch of the saphenous nerve, traumatic eczematous dermatitis (SKINTED) is a postsurgical localized dermatitis specifically linked to total knee arthroplasty (TKA). It is due to autonomic denervation following surgically inflicted nerve injury. It develops several months to years following a surgical trauma. It is being referred to by various names in the literature. Locoregional immune dysfunction due to lymphatic injury after surgery is the currently accepted theory. It must be distinguished from atopic dermatitis, allergic contact dermatitis/sensitization induced by topical medications or implanted metal hypersensitivity dermatitis, and post-traumatic eczema/dermatitis. We present a case of an elderly female patient in her 50s with dry eczematous lesions over the lateral aspect of the surgical incision over both knees developed three months following bilateral total knee replacement (TKR) done in view of osteoarthritis. The patient responded well to topical corticosteroid and emollient treatment. We have also reviewed the literature to provide an overview of potential concepts of etiopathogenesis described in the literature and to clear up any ambiguity surrounding various labels given to this entity.

Optimising total knee replacement imaging: a novel 3D printed PET/CT anthropomorphic phantom for metal artefact simulation.

PURPOSE: Arthroplasty phantoms, including total knee replacement (TKR) phantoms, have been frequently used to test metal artefact reduction methods applied to positron emission tomography/computed tomography (PET/CT) images. These phantoms generally simulate either simple anatomical features or simple activity distribution around the metal inserts in the PET/CT scans. 3D printing has been used recently to fabricate fillable anthropomorphic phantoms that accurately simulate volume and geometry. This study aims to describe the process of image segmentation, phantom modelling, 3D printing and validation of a population-based fillable TKR phantom that simulates human TKR PET/CT metal artefacts. METHODS: 10 participants (5 male and 5 female) were scanned using 3T MRI and the images were segmented to create average male and average female 3D knee models, inversely with void cortical and porous trabecular compartments for 3D printing and contrast media. Virtual total knee replacement (TKR) surgery was implemented on these models to prepare the insertion locations for knee prosthetic implants. Subsequently, TKR models were printed using a 3D photopolymer resin printer and then injected with normal saline to test the phantoms for any leaks. Subsequently, diluted iodinated contrast media was injected into the cortical compartment and saline with 18F-FDG was injected into the trabecular compartment and the phantom was scanned with PET/CT. The images were then evaluated and compared to the human knee radiographic features reported in the literature. RESULTS: Phantoms were shown to be fluid-tight with distinct compartments. They showed comparable volume and geometry to the segmented human MRI knees. The phantoms demonstrated similar values for x-ray attenuation and Hounsfield units (HU) to the literature for both cortical and trabecular compartments. The phantoms displayed a uniform distribution for the radioactive tracer, resembling that seen in human trabecular bone PET. TKR phantom PET/CT images with metal inserts replicated the clinical metal artefacts seen clinically in the periprosthetic area. CONCLUSION: This novel, 3D-printed, and customisable phantom effectively mimics the geometric, radiographic and radiotracer distribution features of real TKRs. Importantly, it simulates TKR image metal artefacts, making it suitable for repeatable and comprehensive evaluation of various metal artefact reduction methods in future research.

Cemented vs. Cementless Fixation in Primary Knee Replacement: A Narrative Review.

Knee osteoarthritis (OA) is one of the leading causes of disability around the globe. Osteoarthritis is mainly considered a disease affecting the elderly. However, more and more studies show that sports overuse, obesity, or congenital disorders can initiate a pathologic cascade that leads to OA changes in the younger population. Nevertheless, OA mostly affects the elderly, and with increasing life expectancy, the disease will develop in more and more individuals. To date, the golden standard in the treatment of the end-stage of the disease is total joint replacement (TJR), which restores painless knee motion and function. One of the weakest elements in TJR is its bonding with the bone, which can be achieved by bonding material, such as poly methyl-methacrylate (PMMA), or by cementless fixation supported by bone ingrowth onto the endoprosthesis surface. Each technique has its advantages; however, the most important factor is the revision rate and survivor time. In the past, numerous articles were published regarding TJR revision rate, but no consensus has been established yet. In this review, we focused on a comparison of cemented and cementless total knee replacement surgeries. We introduced PICO rules, including population, intervention, comparison and outcomes of TJR in a PubMed search. We identified 783 articles published between 2010 and 2023, out of which we included 14 in our review. Our review reveals that there is no universally prescribed approach to fixate knee prostheses. The determination of the most suitable method necessitates an individualized decision-making process involving the active participation and informed consent of each patient.

No significant clinical differences between native or reduced posterior tibial slope in kinematically aligned total knee replacement with posterior cruciate-retaining.

Aims & objectives: Total knee arthroplasty (TKA) is a common surgical procedure for end-stage knee osteoarthritis. However, conventional alignment techniques may lead to postoperative dissatisfaction in up to 20% of cases. Kinematic alignment (KA) has emerged as a new philosophy to restore the native joint line and achieve more natural kinematics. Preserving the posterior tibial slope (PTS) and posterior cruciate ligament (PCL) is crucial to maintaining the pre-arthritic joint line and improving knee kinematics. This study aimed to assess the prevalence of postoperative PTS changes and their impact on functional outcomes and range of motion. Materials & methods: A retrospective single-center study was conducted on patients who underwent KA-TKA with PCL preservation. The preoperative and postoperative PTS were measured on lateral knee radiographs using the tibial proximal anatomic axis method. Patient-reported outcome measures (PROMs) were collected pre- and postoperatively up to a two-year follow-up. Results: Of the 95 included patients, 62.1% achieved an anatomically similar PTS (within 3° from the preoperative value), while 37.9% experienced noticeable PTS changes. However, no significant associations existed between PTS changes and compromised PROMs (WOMAC, 22.2 and 23.1; FJS, 66.6 and 67.3), ROM (118.5° and 119.4°), or patient satisfaction. No postoperative complications requiring reoperation or component revisions were observed. Conclusion: Preserving or modifying the native PTS during KA-TKA could be confidently undertaken without compromising functional outcomes or patient satisfaction.

Biomechanical comparison of all-polyethylene total knee replacement and its metal-backed equivalent on periprosthetic tibia using the finite element method.

BACKGROUND: Total knee arthroplasty (TKA) with all-polyethylene tibial (APT) components has shown comparable survivorship and clinical outcomes to that with metal-backed tibial (MBT). Although MBT is more frequently implanted, APT equivalents are considered a low-cost variant for elderly patients. A biomechanical analysis was assumed to be suitable to compare the response of the periprosthetic tibia after implantation of TKA NexGen APT and MBT equivalent. METHODS: A standardised load model was used representing the highest load achieved during level walking. The geometry and material models were created using computed tomography data. In the analysis, a material model was created that represents a patient with osteopenia. RESULTS: The equivalent strain distribution in the models of cancellous bone with an APT component showed values above 1000 µÎµ in the area below the medial tibial section, with MBT component were primarily localised in the stem tip area. For APT variants, the microstrain values in more than 80% of the volume were in the range from 300 to 1500 µÎµ, MBT only in less than 64% of the volume. CONCLUSION: The effect of APT implantation on the periprosthetic tibia was shown as equal or even superior to that of MBT despite maximum strain values occurring in different locations. On the basis of the strain distribution, the state of the bone tissue was analysed to determine whether bone tissue remodelling or remodelling would occur. Following clinical validation, outcomes could eventually modify the implant selection criteria and lead to more frequent implantation of APT components.

Navigated Versus Conventional Total Knee Arthroplasty: A Systematic Review and Meta-analysis of Prospective Randomized Controlled Trials.

Background: Recent evidence on the cost-effectiveness of technology in total knee arthroplasty (TKA) demonstrated that navigated computer-assisted methods (N-TKA) is likely to be most cost-effective in the clinical setting. The aim of the current meta-analysis is to compare radiographic, clinical and functional outcomes between conventional TKA (C-TKA) and N-TKA methods. Methods: All prospective randomized controlled trials (pRCTs) comparing primary TKA performed using C-TKA and N-TKA techniques were eligible for inclusion. Radiographic outcomes included postoperative coronal, sagittal and axial component alignment. Clinical outcomes included all-cause revision and aseptic revision. Functional outcomes were analyzed when reported. A random-effects meta-analysis of all available cases was performed. This allowed for all missing data. Results: Normal coronal mechanical alignment of the tibial (p < 0.001) and femoral (p = 0.001) components was achieved more frequently with N-TKA. Normal sagittal mechanical alignment of the tibial component was achieved significantly more with N-TKA (p < 0.010). There was no difference in short-term clinical survivorship (all-cause, p = 0.649; aseptic, p = 0.79) or in functional outcomes reported between groups. There was a clinically significant reduction in the mean C-TKA operative time (87 min, σ = 16.6, 95% CI 76.4-98.8) compared N-TKA (97.6 min, σ = 16.9, 95% CI 86.2-109.1) (p = 0.17). Conclusion: Navigated TKA achieves superior radiographic alignment for femoral and tibial components in both the coronal and sagittal plane. Operative times are 10 min longer in the N-TKA group. Functional outcomes are similar between navigated and conventional groups. Clinical outcomes reported in Level I studies are limited to short-term follow-up so future prospective studies are required.

High revision rates and mortality after distal femoral replacement for periprosthetic distal femoral fractures: analysis from the German Arthroplasty Registry (EPRD).

PURPOSE: This study was initiated to analyze the outcome after distal femoral replacement (DFR) for periprosthetic distal femoral fractures (PDFF). METHODS: Data from the German Arthroplasty Registry (EPRD) were analyzed. A total of 626 patients could be identified with a DFR for PDFF. Mean age was 78.8 years, and 84.2% were female. Revisions and mortality were analyzed and compared with patient groups with a similar procedure (revision total knee arthroplasty) or similar general condition (fracture total hip arthroplasty, hip hemiarthroplasty). Matched-pair-analyses were performed. RESULTS: Within one year after surgery, 13.2% of the patients had died and further 9.4% were revised. Within four years, 32.7% had died and 19.7% were revised. Revisions were nearly twice as high as in the comparison groups. Periprosthetic infection (PJI) was the most frequent cause for revision, resulting in a PJI rate of 12.8%, which was lower in the comparison groups. Mortality after DFR was as similar high as after fracture hip arthroplasty. CONCLUSION: PDFF are a serious injury, and the necessary surgical treatment has a high risk of complications. Every third patient after DFR for PDFF had died and every fifth patient needed revision within 4 years after surgery. Efforts should be undertaken to provide optimal treatment to these high-risk patients to reduce unfavorable outcomes. LEVEL OF EVIDENCE: III. REGISTRATION OF CLINICAL TRIALS: As this is a registry-derived study of data of the German Arthroplasty Registry (EPRD), no registration was performed.

Physical activity and health-related quality of life of patients with chronic knee pain after total knee replacement: Analysis of the PEP-TALK trial.

BACKGROUND: Chronic pain is a major challenge for some people after total knee replacement (TKR). The changing impact of this complication during the first post-operative year remains unclear. This analysis aimed to examine how physical activity and health-related quality of life (HRQoL) evolved over the first year after TKR for patients with and without post-operative chronic knee pain. METHODS: We conducted a secondary analysis of data from a randomised controlled trial (PEP-TALK), which tested the effectiveness of a behaviour change physiotherapy intervention compared with usual rehabilitation after TKR. Mean UCLA Activity Score and EQ-5D-5L for participants with and without chronic knee pain (14 points or lower in the Oxford Knee Score Pain Subscale (OKS-PS) at six months post-TKR) were compared at six and 12 months post-TKR. RESULTS: Data from 83 participants were analysed. For those with chronic knee pain, UCLA Activity Score remained unchanged between baseline to six months (mean: 3.8 to 3.8), decreasing at 12 months (3.0). Those without post-operative chronic knee pain reported improved physical activity from baseline to six months (4.0 vs 4.9), plateauing at 12 months (4.9). Participants with chronic knee pain reported lower baseline HRQoL (0.28 vs 0.48). Both groups improved health utility over one year. Of those without chronic pain at six months, 8.5% returned to chronic pain by 12 months. CONCLUSIONS: Monitoring clinical outcomes after six months may be indicated for those at risk of chronic pain post-TKR. Further, sufficiently powered analyses are warranted to increase the generalisability of this exploratory analyses' results.

Customized-individually-made origin® implants in total knee arthroplasty allow a reliable solution for accurate reproduction of planned implant positioning.

PURPOSE: To evaluate the accuracy and reproducibility of a patient-specific, customized individually made (CIM) total knee replacement (TKR) using the ORIGIN® prosthesis. METHODS: This was a prospective study conducted at a University Hospital from January 15, 2019, to April 30, 2021. The study included patients planned for an ORIGIN® CIM TKR procedure. Exclusion criteria included revision surgery, severe deformity, stiffness, or laxity. Evaluations were carried out using computed tomography scans performed 8 weeks preoperatively and 6 weeks postoperatively. The primary outcome measurements were the preoperative, planned, and postoperative CT scan alignment measurements including the Hip-Knee-Ankle (HKA) angle, mechanical Medial Distal Femoral articular surface Angle (mMDFA, distal alpha angle), Posterior Distal femoral articular surface angle (PDFA, posterior alpha angle), mechanical Medial Proximal Tibial articular surface Angle (mMPTA, beta angle) and posterior proximal tibial angle (PPTA). Secondary outcomes included the accuracy of implant positioning with percentage of outliers at 2° and 3° RESULTS: The study encompassed 51 knees from 50 patients with mean age of 68.1 (SD = 8.89). The overall HKA angle deviated by -0.93° [95% CI: -1.45; -0.43], and the PDFA angle by -0.61° [95% CI: -1.07; -0.15], while the mMPTA exceeded planned values by 1.00° [95% CI: 0.57; 1.43]. The 3° outliers rate ranged from 3.9% for the mMPTA to 7.8% for the HKA alignment, with no outliers in mMDFA and PPTA. Similarly, the 2° outliers rate ranged from 15.7% for both the PDFA angle and mMPTA to 19.6% for the HKA alignment. The Bland-Altman plots further emphasized the precision of planned and post-operative angles across all measurements. CONCLUSION: The CIM TKR showed high accuracy and reproducibility, closely matching preoperative planning. The weakest accuracy at 3°-outliers is in the reproduction of the HKA alignment at 92.2% (range for all angle: 92.2-100%). Similarly, the weakest accuracy at 2°-outliers is in the reproduction of the HKA alignment at 80.4% (range for all angles: 80.4-92.2%).

Constitutional alignment predicts medial ligament balancing in mechanically aligned total knee arthroplasty for varus knees.

PURPOSE: The aim of this study was to identify if constitutional alignment and preoperative radiologic parameters determined whether medial gap balancing was required in mechanically aligned total knee arthroplasty (TKA). METHODS: Two hundred and sixty three patients with 394 consecutive knees who underwent primary TKAs were retrospectively analysed in this study. Selective sequential multiple needle puncturing (MNP) was performed for medial ligament balancing when required. Constitutional alignment, which was determined using the Coronal Plane Alignment of the Knee (CPAK) classification, as well as preoperative and postoperative radiologic parameters was evaluated to identify factors which predicted the need for MNP. RESULTS: One hundred and fifty eight (40.1%) knees required medial ligament balancing with MNP. Patients who required MNP during surgery had significantly more constitutional varus, more varus preoperative mechanical Hip-Knee-Ankle angle (mHKA), smaller preoperative medial proximal tibial angle (MPTA) and a larger change in mHKA and MPTA after surgery than those who did not. Patients with constitutional varus also had a higher incidence of having had MNP to both anterior and posterior superficial medial collateral ligament (sMCL) fibres. There was no significant difference in preoperative lateral distal femoral angle (LDFA), posterior tibial slope (PTS) and varus-valgus difference (VVD) between groups. CONCLUSION: Ligament balancing using MNP was determined by constitutional alignment rather than medial soft tissue contracture. Patients with constitutional varus who had a larger medio-lateral gap difference in extension also had a higher incidence of having had MNP to both anterior and posterior sMCL fibres. LEVEL OF EVIDENCE: Retrospective comparative study, level IV.

A Systematic Review and Network Meta-Analysis of the Outcomes of Patients With Total Knee Arthroplasty Using Cemented, Uncemented, or Hybrid Techniques.

In this study, we aim to explore the differences among the three types of fixation methods for the components of the knee joint in patients who underwent total knee arthroplasty (TKA). These methods are cemented, uncemented, and hybrid fixation. Cemented fixation means that a special type of grout is used to attach the components to the bone. Uncemented fixation means that the components are designed to fit tightly into the bone and allow new bone growth to secure them. Hybrid fixation means that a combination of cemented and uncemented fixation is used for different components. We searched four online databases to find studies relevant to our research question. We use the R program (R Foundation for Statistical Computing, Vienna, Austria) for network meta-analysis (NMA) to analyze the data from the studies. We calculate the mean difference (MD) and the 95% confidence interval (CI) for each outcome, which are statistical measures of the difference and the uncertainty between methods. We use these measures for continuous outcomes, meaning they can have any value. For dichotomous outcomes, meaning they can only have two values, we use the risk ratio (RR) and the 95% CI, which are statistical measures of the relative risk and the uncertainty between methods. We assess the quality of randomized controlled trials, which are studies that randomly assign participants to different methods, using the Cochrane Risk of Bias Assessment Tool 1, a tool that evaluates the potential biases in the studies. We include 21 studies, and our analysis shows that cemented TKA reveals a statistically significant decrease in pain with hybrid TKA (MD = -2.82). That said, we find no significant differences between uncemented and cemented or hybrid (MD = -0.80 and -2.02, respectively). The results show that there is no significant difference between uncemented TKA and cemented TKA or hybrid technique (RR = 0.87, 95% CI 0.35-2.14; RR = 0.73, 95% CI 0.22-2.39, respectively). Also, we find no significant difference between cemented TKA and hybrid TKA (RR = 0.84, 95% CI 0.24-2.93). Cemented TKA is associated with a lower risk of deep vein thrombosis (DVT) incidence rate. Moreover, it shows a significant decrease in pain compared to hybrid TKA. Future research is needed to compare among the three interventions.