A review of functions and mechanisms of clay soil conditioners and catalysts in thermal remediation compared to emerging photo-thermal catalysis.

High temperatures and providing sufficient time for the thermal desorption of persistent organic pollutants (POPs) from contaminated clay soils can lead to intensive energy consumption. Therefore, this article provides a critical review of the potential additives which can improve soil texture and increase the volatility of POPs, and then discusses their enhanced mechanisms for contributing to a green economy. Ca-based additives have been used to reduce plasticity of bentonite clay, absorb water and replenish system heat. In contrast, non-Ca-based additives have been used to decrease the plasticity of kaolin clay. The soil structure and soil plasticity can be changed through cation exchange and flocculation processes. The transition metal oxides and alkali metal oxides can be applied to catalyze and oxidize polycyclic aromatic hydrocarbons, petroleum and emerging contaminants. In this system, reactive oxygen species (•O2- and •OH) are generated from thermal excitation without strong chemical oxidants. Moreover, multiple active ingredients in recycled solid wastes can be controlled to reduce soil plasticity and enhance thermal catalysis. Alternatively, the alkali, nano zero-valent iron and nano-TiN can catalyze hydrodechlorination of POPs under reductive conditions. Especially, photo and photo-thermal catalysis are discussed to accelerate replacement of fossil fuels by renewable energy in thermal remediation.

Cu/TiO2 adsorbents modified by air plasma for adsorption-oxidation of H2S.

In this study, non-thermal plasma (NTP) was employed to modify the Cu/TiO2 adsorbent to efficiently purify H2S in low-temperature and micro-oxygen environments. The effects of Cu loading amounts and atmospheres of NTP treatment on the adsorption-oxidation performance of the adsorbents were investigated. The NTP modification successfully boosted the H2S removal capacity to varying degrees, and the optimized adsorbent treated by air plasma (Cu/TiO2-Air) attained the best H2S breakthrough capacity of 113.29 mg H2S/gadsorbent, which was almost 5 times higher than that of the adsorbent without NTP modification. Further studies demonstrated that the superior performance of Cu/TiO2-Air was attributed to increased mesoporous volume, more exposure of active sites (CuO) and functional groups (amino groups and hydroxyl groups), enhanced Ti-O-Cu interaction, and the favorable ratio of active oxygen species. Additionally, the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results indicated the main reason for the deactivation was the consumption of the active components (CuO) and the agglomeration of reaction products (CuS and SO42-) occupying the active sites on the surface and the inner pores of the adsorbents.

Variability in thermal tolerance of clutches from different mothers indicates adaptation potential to climate warming in sea turtles.

The current climate warming is a challenge to biodiversity that could surpass the adaptation capacity of some species. Hence, understanding the means by which populations undergo an increase in their thermal tolerance is critical to assess how they could adapt to climate warming. Specifically, sea turtle populations could respond to increasing temperatures by (1) colonizing new nesting areas, (2) nesting during cooler times of the year, and/or (3) by increasing their thermal tolerance. Differences in thermal tolerance of clutches laid by different females would indicate that populations have the potential to adapt by natural selection. Here, we used exhaustive information on nest temperatures and hatching success of leatherback turtle (Dermochelys coriacea) clutches over 14 years to assess the occurrence of individual variability in thermal tolerance among females. We found an effect of temperature, year, and the interaction between female identity and nest temperature on hatching success, indicating that clutches laid by different females exhibited different levels of vulnerability to high temperatures. If thermal tolerance is a heritable trait, individuals with higher thermal tolerances could have greater chances of passing their genes to following generations, increasing their frequency in the population. However, the high rate of failure of clutches at temperatures above 32°C suggests that leatherback turtles are already experiencing extreme heat stress. A proper understanding of mechanisms of adaptation in populations to counteract changes in climate could greatly contribute to future conservation of endangered populations in a rapidly changing world.

Advanced Mechanical Transfer of Micro-LEDs Enabled by Structurally Modified Wide Sapphire Nanomembranes through Thermal Reflow of Photoresist.

Micro light-emitting diodes (micro-LEDs) are pivotal in next-generation display technologies, driven by the need for high pixel density. This study introduces a novel methodology utilizing wide sapphire nanomembranes (W-SNM) as a dual-purpose template for high-quality epitaxial growth and the mechanical lift-off of individual micro-LEDs. Micro-LEDs grow individually on W-SNM, obviating the chip singulation process. By employing mechanical fracturing of the thin W-SNM, our method facilitates the transfer of micro-LEDs without the conventional laser lift-off (LLO) process. Previously introduced sapphire nanomembranes (SNM) have shown promise in enhancing epitaxial layer quality; however, they encountered challenges in managing micro-LED size variation and achieving efficient mechanical transfer. Here, we apply simple yet effective adjustments to the SNM structure, specifically, its elevation and widening. This strategic modification allows micro-LEDs to endure applied forces without incurring cracks or defects, ensuring that only the targeted W-SNM are selectively fractured. The mechanically transferred vertical 15 × 15 µm2 micro-LED device operates at an optimal turn-on voltage of 3.3 V. Finite element simulations validate the mechanical strain distribution between the W-SNM and GaN when pressure is applied, confirming the efficacy of our design approach. This pioneering methodology offers a streamlined, efficient pathway for the production and mechanical transfer of micro-LEDs, presenting new avenues for their integration into next-generation, high-performance displays.

Larval diet impacts black soldier fly (Diptera: Stratiomyidae) thermal tolerance and preference.

Thermal tolerance and preference are key parameters impacting agricultural production systems. In this study, the impact of larval diet on black soldier fly thermal tolerance and preference across life-stages and sexes was examined. Larvae were fed either a low-protein high-carbohydrate synthetic diet (i.e., P7C35), a high-protein low-carbohydrate synthetic diet (i.e., P35C7), or the Gainesville diet (i.e., C) as a control and reference. Our results demonstrate that the impacts of larval diet on black soldier fly thermal tolerance and preference could be stage and sex specific. The mean heat knockdown temperatures (HKT) ranged between 46.6 and 47.9 °C. Synthetic diets resulted in greater HKT and the difference decreased form larvae (e.g., ∼1 °C) to adults (e.g., ∼0.2 °C). The mean chill-coma recovery time (CCRT) ranged between 8.3 and 21.6 min. Not much differences were detected between diets, but CCRT became longer from larvae to adults. The mean thermal preference ranged between 13.6 and 29.5 °C. Larvae fed synthetic diets preferred much lower temperatures than the control diet. A bimodal distribution was observed for adults regardless of sex. Differences on body mass, lipid, and protein contents were detected among diets; however, more research should be done before any conclusions can be linked to their thermal traits. These findings highlight the importance of considering the ingredients and nutritional makeup of larval diets when optimizing temperature management protocols for mass production of black soldier flies. Conversely, specific diets can be developed to promote survival under extreme rearing temperatures.

Sexual color ornamentation, microhabitat choice, and thermal physiology in the common wall lizard (Podarcis muralis).

Common wall lizards (Podarcis muralis) in Italy show a striking variation in body coloration across the landscape, with highly exaggerated black and green colors in hot and dry climates and brown and white colors in cool and wet climates. Males are more intensely colored than females, and previous work has suggested that the maintenance of variation in coloration across the landscape reflects climatic effects on the strength of male-male competition, and through this sexual selection. However climatic effects on the intensity of male-male competition would need to be exceptionally strong to fully explain the geographic patterns of color variation. Thus, additional processes may contribute to the maintenance of color variation. Here we test the hypothesis that selection for green and black ornamentation in the context of male-male competition is opposed by selection against ornamentation because the genes involved in the regulation of coloration have pleiotropic effects on thermal physiology, such that ornamentation is selected against in cool climates. Field observations revealed no association between body coloration and microhabitat use or field active body temperatures. Consistent with these field data, lizards at the extreme ends of the phenotypic distribution for body coloration did not show any differences in critical minimum temperature, preferred body temperature, temperature-dependent metabolic rate, or evaporative water loss when tested in the laboratory. Combined, these results provide no evidence that genes that underlie sexual ornamentation are selected against in cool climate because of pleiotropic effects on thermal biology.

High Thermal Conductive Liquid Crystal Elastomer Nanofibers.

Liquid crystal elastomers (LCEs), consisting of polymer networks and liquid crystal mesogens, show a reversible phase change under thermal stimuli. However, the kinetic performance is limited by the inherently low thermal conductivity of the polymers. Transforming amorphous bulk into a fiber enhances thermal conductivity through the alignment of polymer chains. Challenges are present due to their rigid networks, while cross-links are crucial for deformation. Here, we employ hydrodynamic alignment to orient the LCE domains assisted by controlled in situ cross-linking and to remarkably reduce the diameter to submicrons. We report that the intrinsic thermal conductivity of LCE fibers at room temperature reaches 1.44 ± 0.32 W/m-K with the sub-100 nm diameter close to the upper limit determined in the quasi-1D regime. Combining the outstanding thermal conductivity and thin diameters, we anticipate these fibers to exhibit a rapid response and high force output in thermomechanical systems. The fabrication method is expected to apply to other cross-linked polymers.

Effects of compound emulsifiers on the characteristics and stability of nano-emulsions from pollock bones.

To improve the stability of pollock bone broth, compound emulsifiers were employed and evaluated in nano-emulsions from pollock bones (PBNs). The microstructure, creaming index, particle size, zeta potential, and viscosity of PBNs were characterized and the stability of PBNs was investigated. It revealed that the concentration of compound emulsifiers is one of the principal factors for particle size, zeta potential, and viscosity of PBNs, and 0.9% of sodium caseinate and sucrose fatty acid ester (CS-SE) can make the PBN display good stability. Its particle size changed from 81.17 ± 1.33 nm to 19.62 ± 0.21 nm when the temperature ranged from 40 °C to 80 °C, and its creaming index could reach a maximum (90.83%) among all PBNs in 4 months of freeze-thaw assays. PBN stability could be improved by the compound emulsifier (CS-SE), which offers a theoretical basis for the application of pollock bone broth.

Association analysis of HSP90AA1 polymorphism with thermotolerance in tropically adapted Indian crossbred cattle.

Raising cattle is a lucrative business that operates globally but is confronted by many obstacles, such as thermal stress, which results in substantial monetary losses. A vital role of heat shock proteins (HSPs) is to protect cells from cellular damage. HSP90 is a highly prevalent, extremely adaptable gene linked to physiological resilience in thermal stress. This study aimed to find genetic polymorphisms of the HSP90AA1 gene in Karan Fries cattle and explore their relationship to thermal tolerance and production traits. One SNP (g.3292 A > C) was found in the Intron 8 and three SNPs loci (g.4776 A > G, g.5218T > C and g.5224 A > C) were found in the exon 11 of 100 multiparous Karan Fries cattle. The association study demonstrated that the SNP1-g.3292 A > C was significantly (P < 0.01) linked to the variables respiratory rate (RR), heat tolerance coefficient (HTC) and total milk yield (TMY (kg)) attributes. There was no significant correlation identified between any of the other SNP sites (SNP2-g.4776 A > G; SNP3-g.5218T > C; SNP4-g.5224 A > C) with the heat tolerance and production attributes in Karan Fries cattle. Haploview 4.2 and SHEsis software programs were used to analyse pair linkage disequilibrium and construct haplotypes for HSP90AA1. Association studies indicated that the Hap3 (CATA) was beneficial for heat tolerance breeding in Karan Fries cattle. In conclusion, genetic polymorphisms and haplotypes in the HSP90AA1 were associated with thermal endurance attributes. This relationship can be utilized as a beneficial SNP or Hap marker for genetic heat resistance selection in cow breeding platforms.

Degradation and regeneration inhibition of PCDD/Fs in incineration fly ash by low-temperature thermal technology.

Low-temperature thermal degradation of PCDD/Fs for incineration fly ash (IFA), as a novel and emerging technology approach, offers promising features of high degradation efficiency and low energy consumption, presenting enormous potential for application in IFA resource utilization processes. This review summarizes the concentrations, congener distributions, and heterogeneity characteristics of PCDD/Fs in IFA from municipal, medical, and hazardous waste incineration. A comparative analysis of five PCDD/Fs degradation technologies is conducted regarding their characteristics, industrial potential, and applicability. From the perspective of low-temperature degradation mechanisms, pathways to enhance PCDD/Fs degradation efficiency and inhibit their regeneration reactions are discussed in detail. Finally, the challenges to achieve low-temperature degradation of PCDD/Fs for IFA with high-efficiency are prospected. This review seeks to explore new opportunities for the detoxification and resource utilization of IFA by implementing more efficient and viable low-temperature degradation technologies.

Livestock-Forest integrated system attenuates deleterious heat stress effects in bovine oocytes.

Global warming poses significant challenges to the fertility of tropical dairy cattle. One promising approach to mitigate heat stress effects on reproductive function and reduce the carbon footprint is the use of integrated livestock-forest (ILF) systems. The aim of this study was to investigate the effects of two different systems, namely Full Sun (FS) and ILF, on maternal hyperthermia and oocyte quality of Holstein and Girolando heifers during the tropical summer season. The temperature-humidity index (THI) data revealed intense heat stress during the experiment. Both the system (P<0.01) and the breed (P<0.01) factors had a significant impact on vaginal temperature, being hyperthermia more pronounced in the FS system and in the Holstein breed. Over the five time points collected at a 33-day interval, we observed distinct patterns for ILF (P=0.65) and FS (P<0.001) systems, suggesting an adaptive response in animals kept in FS systems. Furthermore, oocyte quality assessment revealed an effect of the system for oocyte diameter (P<0.001) and levels of IGFBP2 (P<0.001), and caspase 3 levels showed a decrease in ILF compared to FS for both Holstein (P<0.001) and Girolando (P<0.001) breeds. Collectively, these parameters indicate that oocyte quality during the summer months was superior in animals maintained in the ILF system. In conclusion, the ILF system demonstrated promising results in attenuating maternal hyperthermia and mitigating its effects on oocyte quality. Additionally, our observations suggest that animals in the FS system may exhibit an adaptive response to heat stress.

Incorporating artificial intelligence in portable infrared thermal imaging for the diagnosis and staging of nonalcoholic fatty liver disease.

Metabolic Dysfunction-Associated Steatotic Liver Disease (MASLD) is one of the most prevalent chronic liver diseases worldwide. Thermal imaging combined with advanced image-processing and machine learning analysis accurately classified disease status in a study on mice; this study aimed to develop this tool for humans. This prospective study included 46 patients who underwent liver biopsy. Liver thermal imaging was performed on the same day as liver biopsy. We developed an image-processing algorithm that measured the relative spatial thermal variation across the skin covering the liver. The texture parameters obtained from the thermal images were input into the machine learning algorithm. Patients were diagnosed with MASLD and stratified according to nonalcoholic fatty liver disease activity score (NAS) and fibrosis stage using the METAVIR score. Twenty-one of 46 patients were diagnosed with MASLD. Using thermal imaging followed by processing, detection accuracy for patients with NAS >4 was 0.72.

Simulation study on the thermal effect of continuous laser heating quartz materials.

The continuous development and application of laser technology, and the increasing energy and power of laser output have promoted the development of various types of laser optical systems. The optical components based on quartz materials are key components of high-power laser systems, and their quality directly affects the load capacity of the system. Due to the photothermal effect when the laser interacts with the quartz material and generates extremely high temperatures in a short period of time, it is impossible to experimentally solve the phenomena and physical mechanisms under extreme conditions. Therefore, it is very important to select a suitable method to investigate the thermal effect of intense laser interaction with quartz materials and explain the related physical mechanism. In this study, a three-dimensional quarter-symmetric laser heating quartz material geometry model by using nonlinear transient finite element method was established, and its transient temperature field distribution of the quartz material after being heated by a 1,064 nm continuous laser was investigated. In addition, the influence of different laser parameters (laser spot radius, heat flux and irradiation time), material parameters (material thickness, material absorption rate of laser) on the thermal effect of heating quartz material were also studied. When the laser heat flux is 20 W/cm2, the diameter of the laser spot is 10 cm, the irradiation time is 600 s and the thickness is 4 cm, the temperature after laser heating can reach 940.18°C, which is far lower than the melting point. In addition, the temperature maximum probes were set at the overall model, spot edge and rear surface respectively, and their temperature rise curves with time were obtained. It is also found that there is a significant hysteresis period for the rear surface temperature change of the quartz material compared with the overall temperature change due to heat conduction. Finally, the method proposed can also be applied to the laser heating of other non-transparent materials.

Analysis of the temperature-dependent plastic deformation of single crystals of quinary, quaternary and ternary equiatomic high- and medium-entropy alloys of the Cr-Mn-Fe-Co-Ni system.

Temperature-dependent plastic deformation behaviors of single crystals of quaternary and ternary equiatomic medium-entropy alloys (MEAs) belonging to the Cr-Mn-Fe-Co-Ni system were investigated in compression at temperatures in the range 9 K to 1373 K. Their critical resolved shear stresses (CRSSs) increase with decreasing temperature below room temperature. There is also a dulling of the temperature dependence of CRSS below 77 K due to dislocation inertial effects that we attribute to a decrease in the phonon drag coefficient. These behaviors were compared with those of previously investigated single crystals of the equiatomic Cr-Co-Ni and Cr-Fe-Co-Ni MEAs, and the equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloy (HEA). The temperature dependence of CRSS and the apparent activation volumes below room temperature can be well described by conventional thermal activation theories of face-centered cubic (FCC) alloys. Above 673 K, there is a small increase in CRSS, which we believe is due to elastic interactions between solutes and mobile dislocations, the so-called Portevin-Le Chatelier (PL) effect. The CRSS at 0 K was obtained by extrapolation of fitted CRSS vs. temperature curves and compared with predictions from solid solution strengthening models of HEA and MEAs.

The novelty of our work entitled 'Analysis of the temperature-dependent plastic deformation of single crystals of quinary, quaternary and ternary equiatomic high- and medium-entropy alloys of the Cr-Mn-Fe-Co-Ni system' can be summarized as follows: The temperature dependences of CRSS were experimentally deduced from bulk single crystals of the six MEAs for the first time, so that fair comparison among the FCC HEA/MEAs is made.

Symmetry in thermal cycles and processes.

Symmetry analysis is a cutting-edge research approach in physics, yet its application in macroscopic energy systems remains limited. This study demonstrates its potential to provide valuable insights for a deeper understanding and development of thermodynamic cycles. This article first studies the symmetry of the proposed C-P diagrams and finds rich symmetries including reflection symmetry, translation symmetry, and rotational symmetry within Carnot cycles. Then, it emphasizes that one can use symmetry alone to prove that the highest efficiency for any cycle operating in a certain temperature range is the Carnot efficiency, without relying on the entropy concept in the second law of thermodynamics. Lastly, it is found that this symmetry analysis framework can also be used for thermal cycles with phase transitions, as exemplified by applying in Rankine cycles. This research not only contributes groundbreaking insights into unraveling the symmetry inherent in thermodynamic cycles, but also promotes symmetry analysis to be an alternative analysis mean.

Monitoring overloaded trucks with infrared thermal imaging of tire sidewall.

Overloaded trucks have long posed a threat to the road safety. To assess truck payload more effectively, this study focus on tire temperature data obtained through infrared thermal imaging. It is feasible to analyse the payload by monitoring one single representative tire. Tire sidewall surface is the best area for data extraction. Truck overload caused significant increase of gas temperature in tires, as well as external temperature. The internal temperature can be calculated with real gas equation of state. By studying the relationship between internal gas temperature of tire and payload, it is demonstrated that monitoring the temperature of tire sidewall surface is an innovative, remote, and real-time method to assess the payload situation of moving trucks.

Highly Anisotropic Thermally Conductive Dielectric Polymer/Boron Nitride Nanotube Composites for Directional Heat Dissipation.

An ideal dielectric material for microelectronic devices requires a combination of high anisotropic thermal conductivity and low dielectric constant (ɛ') and loss (tan δ). Polymer composites of boron nitride nanotubes (BNNTs), which offer excellent thermal and dielectric properties, show promise for developing these dielectric polymer composites. Herein, a simple method for fabricating polymer/BNNT composites with high directional thermal conductivity and excellent dielectric properties is presented. The nanocomposites with directionally aligned BNNTs are fabricated through melt-compounding and in situ fibrillation, followed by sintering the fibrous nanocomposites. The fabricated nanocomposites show a significant enhancement in thermal properties, with an in-plane thermal conductivity (K‖) of 1.8 Wm-1K-1-a 450% increase-yielding a high anisotropy ratio (K‖/K⊥) of 36, a 1700% improvement over isotropic samples containing only 7.2 vol% BNNT. These samples exhibit a 120% faster in-plane heat dissipation compared to the through-plane within 2 s. Additionally, they display low ɛ' of ≈3.2 and extremely low tan δ of ≈0.014 at 1 kHz. These results indicate that this method provides a new avenue for designing and creating polymer composites with enhanced directional heat dissipation properties along with high K‖, suitable for thermal management applications in electronic packaging, thermal interface materials, and passive cooling systems.

Using transglutaminase to cross-link complexes of lactoferrin and α-lactalbumin to increase thermal stability.

The poor thermal stability of lactoferrin (LF) hinders its bioavailability and use in commercial food products. To preserve LF from thermal denaturation, complexation with other biopolymers has been studied. Here we present the complex formation conditions, structural stability, and functional protection of LF by α-lactalbumin (α-LA). The formation of the LF-α-LA complexes was dependent on pH, mass ratio, and ionic strength. Changing the formation conditions and cross-linking by transglutaminase impacted the turbidity, particle size, and zeta-potential of the resulting complexes. Electrophoresis, Fourier-transform infrared spectroscopy, and circular dichroism measurements suggest that the secondary structure of LF in the LF-α-LA complex was maintained after complexation and subsequent thermal treatments. At pH 7, the LF-α-LA complex protected LF from thermal aggregation and denaturation, and the LF retained its functional and structural properties, including antibacterial capacity of LF after thermal treatments. The improved thermal stability and functional properties of LF in the LF-α-LA complex are of interest to the food industry.

Assembling the 2D-3D-2D Heterostructure of Quasi-2D Perovskites for High-Performance Solar Cells.

Quasi-two-dimensional (quasi-2D) layered perovskites with mixed dimensions offer a promising avenue for stable and efficient solar cells. However, randomly distributed three-dimensional (3D) perovskites near the film surface limit the device performance of quasi-2D perovskites due to increased nonradiative recombination and ion migration. Herein, we construct a 2D (n = 4 top)-3D-2D (n = 2 bottom) heterostructure of quasi-2D perovskites by using 3-chlorobenzylamine iodine, which can effectively reduce defect density and restrain ion migration. A champion efficiency of 22.22% for quasi-2D perovskite solar cells is achieved due to remarkably reduced nonradiative voltage loss and increased electron extraction. Additionally, the 2D-3D-2D perovskite solar cells also exhibit excellent thermal and humidity stabilities, retaining over 90 and 85% of the initial efficiencies after 2000 h under a heat stress of 65 °C and at air ambient of ∼50% humidity, respectively. Our results provide a general approach to tune perovskite films for suppressing ion migration and achieving high-performance perovskite solar cells.

Analyte-dependent Rabi splitting in solid-state plexcitonic sensors based on plasmonic nanoislands strongly coupled to J-aggregates.

A key challenge in the field of plexcitonic quantum devices is the fabrication of solid-state, device-friendly plexcitonic nanostructures using inexpensive and scalable techniques. Lithography-free, bottom-up nanofabrication methods have remained relatively unexplored within the context plexcitonic coupling. In this work, a plexcitonic system consisting of thermally dewetted plasmonic gold nanoislands (AuNI) coated with a thin film of J-aggregates was investigated. Control over nanoisland size and morphology allowed for a range of plasmon resonances with variable detuning from the exciton. The extinction spectra of the hybrid AuNI/J-aggregate films display clear splitting into upper and lower hybrid resonances, while the dispersion curve shows anti-crossing behavior with an estimated Rabi splitting of 180 eV at zero detuning. As a proof of concept for quantum sensing, the AuNI/J-aggregate hybrid was demonstrated to behave as a plexcitonic sensor for hydrochloric acid vapor analyte. This work highlights the possibility of using thermally dewetted nanoparticles as a platform for high-quality, tunable, cost-effective, and scalable plexcitonic nanostructures for sensing devices and beyond.