Biofabrication of aminated nanocellulose reinforced polyvinyl alcohol/chitosan nanofibrous scaffold for sustained release of diltiazem hydrochloride.

In the modern environment conscious era, there has been a huge demand for the effective green method to fabricate biomaterials for sustained transdermal release of diltiazem hydrochloride to treat hypertension and cardiac failure. In this vein, the present study explores the amination of waste jute sourced nanocellulose (ANC) and its effect as a reinforcing filler to design electrospun polyvinyl alcohol (PVA)/chitosan based polymeric nanofibrous scaffold for drug delivery. The characterization results of FTIR (Fourier Transform Infrared Spectroscopy) confirm the successful chemical modification of nanocellulose (NCC). SEM (Scanning Electron Microscopy) results indicate the morphological modifications in ANC due to grafting. ANC enhances the mechanical properties of scaffold and sustains the release of the loaded drug to 67.89±3.39% as compared to the pure PVA/chitosan scaffold of 92.63±4.63% over a period of 72 h as shown by the results of in-vitro drug release study. Moreover, the incorporation of 0.5 % ANC improves the anti-bacterial activity against both gram-positive (97.4±4.87%, reduction in viable cells count) and gram-negative bacteria (98.5±4.93%, reduction in viable cells count). Further, the skin irritation and MTT assay authenticate the biocompatibility of the developed scaffold. The overall findings hence prove the efficacy of the engineered scaffold as a potential transdermal patch for sustained drug delivery applications.

Flexible surface acoustic wave technology for enhancing transdermal drug delivery.

Transdermal drug delivery provides therapeutic benefits over enteric or injection delivery because its transdermal routes provide more consistent concentrations of drug and avoid issues of drugs affecting kidneys and liver functions. Many technologies have been evaluated to enhance drug delivery through the relatively impervious epidermal layer of the skin. However, precise delivery of large hydrophilic molecules is still a great challenge even though microneedles or other energized (such as electrical, thermal, or ultrasonic) patches have been used, which are often difficult to be integrated into small wearable devices. This study developed a flexible surface acoustic wave (SAW) patch platform to facilitate transdermal delivery of macromolecules with fluorescein isothiocyanates up to 2000 kDa. Two surrogates of human skin were used to evaluate SAW based energized devices, i.e., delivering dextran through agarose gels and across stratum corneum of pig skin into the epidermis. Results showed that the 2000 kDa fluorescent molecules have been delivered up to 1.1 mm in agarose gel, and the fluorescent molecules from 4 to 2000 kDa have been delivered up to 100 µm and 25 µm in porcine skin tissue, respectively. Mechanical agitation, localised streaming, and acousto-thermal effect generated on the skin surface were identified as the main mechanisms for promoting drug transdermal transportation, although micro/nanoscale acoustic cavitation induced by SAWs could also have its contribution. SAW enhanced transdermal drug delivery is dependent on the combined effects of wave frequency and intensity, duration of applied acoustic waves, temperature, and drug molecules molecular weights.

Advancements in the Transdermal Drug Delivery Systems Utilizing Microemulsion-based Gels.

Microemulsion gel, as a promising transdermal nanoparticle delivery system, addresses the limitations of microemulsions and enhances their performance in drug delivery and release. This article aims to discuss the advantages of microemulsion gel, including improved drug bioavailability, reduced drug irritation, enhanced drug penetration and skin adhesion, and increased antimicrobial properties. It explores the methods for selecting microemulsion formulations and the general processes of microemulsion preparation, as well as commonly used oil phases, surfactants, and co-surfactants. Additionally, the biomedical applications of microemulsion gel in treating conditions, such as acne and psoriasis, are also discussed. Overall, this article elucidates the significant potential of microemulsion gel in topical drug delivery, providing insights into future development and clinical applications.

3D printed microneedles: revamping transdermal drug delivery systems.

One of the advancements of the transdermal drug delivery system (TDDS) is the development of microneedles (MNs). These micron-sized needles are used for delivering various types of drugs to address the disadvantage of other transdermal techniques as well as oral drug delivery systems. MNs have high patient acceptance due to self-administration with minimally invasive and pain compared to the parenteral drug delivery. Over the years, various methods have been adopted to evolve the MNs and make them more cost-effective, accurate, and suitable for multiple applications. One such method is the 3D printing of MNs. The development of MN platforms using 3D printing has been made possible by improved features like precision, printing resolution, and the feasibility of using low-cost raw materials. In this review, we have tried to explain various types of MNs, fabrication methods, materials used in the formulation of MNs, and the recent applications that utilize 3D-printed MNs.

3D printing redefines microneedle fabrication for transdermal drug delivery.

Microneedles (MNs) have emerged as an innovative, virtually painless technique for intradermal drug delivery. However, the complex and costly fabrication process has limited their widespread accessibility, especially for individuals requiring frequent drug administration. This study introduces a groundbreaking and cost-effective method for producing MNs utilizing fused deposition modeling (FDM) 3D printing technology to enhance transdermal drug delivery. The proposed fabrication process involves the elongation of molten polylactic acid (PLA) filaments to create meticulously designed conoid and neiloid MNs with smooth surfaces. This study underscores the critical role of printing parameters, particularly extrusion length and printing speed, in determining the shape of the MNs. Notably, the conoid-shaped MNs exhibit exceptional skin-penetrating capabilities. In order to evaluate their effectiveness, the MNs were tested on a polydimethylsiloxane (PDMS) skin model for skin penetration. The results highlight the high potential of 3D-printed MNs for transdermal drug administration. This novel approach capitalizes on the benefits of 3D printing technology to fabricate MNs that hold the promise of transforming painless drug administration for a variety of medical applications.

Ultrathin silk nanofiber-carbon nanotube skin tattoos for wirelessly triggered and temperature feedbacked transdermal drug delivery.

Transdermal drug delivery has emerged as an alternative to conventional drug delivery systems as it enables painless and convenient drug administration. However, next-generation healthcare systems need to facilitate "on-demand" delivery operations and should be highly efficient to penetrate the physiological barriers in the skin. Here, we report an ultrathin dye-loaded epidermal tattoo (UDET) that allows wirelessly stimulated drug delivery with high efficiency. The UDET consists of an electrospun dye-loaded silk nanofiber mat and a covered carbon nanotube (CNT) layer. UDETs are conformally tattooed on pigskins and show stable operation under mechanical deformation. Biological fluorescence dyes such as vitamin B12, riboflavin, rhodamine B, and sodium fluorescein are applied as model drugs. Illuminating the UDET by a low-power light-emitting diode (< 34.5 mW/cm2) triggers transdermal drug delivery due to heat generation. The CNTs convert the absorbed light into heat, and then the dyes loaded on silk can be diffused through the epidermis. The CNT layer is electrically conductive and can detect the temperature by reading the resistance change (0.1917 Ω/°C). This indicates that the UDET can be used simultaneously to read temperature and deliver the loaded dye molecules, making it a promising on-demand drug delivery strategy for future medicine technology. Supplementary Information: The online version contains supplementary material available at 10.1007/s13534-024-00363-6.

High-Intensity Focused Ultrasound Enhances Drug Penetration into the Human Skin in the Franz Diffusion Cell.

Purpose: High-intensity focused ultrasound (HIFU)-assisted drug delivery is a non-invasive tool to deliver drugs to targeted areas, currently used mainly for treating cancer and cardiovascular diseases. However, in terms of transdermal drug delivery, HIFU technology is still poorly understood. Accordingly, this study sought to investigate the effectiveness of HIFU on drug penetration into the skin using human skin tissues. Methods: Gel-type drugs whose ingredient is glutathione were labelled with fluorescein isothiocyanate, in turn the drugs were allowed to penetrate to the human skin tissue in the Franz diffusion cell for 24 hours in control and HIFU treatment groups, and their fluorescence intensity was measured using a multiple microplate reader at one, two, six, and 24 hours after drug application. In addition, tissue slice analysis was performed in each tissue slice at 24 hours post-drug application. The % area, fluorescence intensity per area, and penetration depth of the drug were measured using a fluorescence microscope. Results: The fluorescence intensity increased with time in all groups. Specifically, at 24 hours after drug application, the fluorescence intensity (a.u). of the 10-shot HIFU treatment group was significantly enhanced compared to that of the control group (p < 0.05). The tissue slice analysis demonstrated that the % area of fluorescent drug and the fluorescence intensity per area (a.u.) were all significantly increased in both HIFU treatment groups compared to the control group (p < 0.05, p < 0.001). In addition, the penetration depth (µm) also markedly rose in both HIFU treatment groups compared to the control group (p < 0.01, p < 0.05). Conclusion: It was demonstrated for the first time that HIFU significantly facilitated topical drug penetration into the human skin, strongly implying that HIFU can be a useful option for transdermal drug delivery.

Development and Evaluation of Docetaxel-Loaded Nanostructured Lipid Carriers for Skin Cancer Therapy.

This study focuses on the design, characterization, and optimization of nanostructured lipid carriers (NLCs) loaded with docetaxel for the treatment of skin cancer. Employing a systematic formulation development process guided by Design of Experiments (DoE) principles, key parameters such as particle size, polydispersity index (PDI), zeta potential, and entrapment efficiency were optimized to ensure the stability and drug-loading efficacy of the NLCs. Combined XRD and cryo-TEM analysis were employed for NLC nanostructure evaluation, confirming the formation of well-defined nanostructures. In vitro kinetics studies demonstrated controlled and sustained docetaxel release over 48 h, emphasizing the potential for prolonged therapeutic effects. Cytotoxicity assays on human umbilical vein endothelial cells (HUVEC) and SK-MEL-24 melanoma cell line revealed enhanced efficacy against cancer cells, with significant selective cytotoxicity and minimal impact on normal cells. This multidimensional approach, encompassing formulation optimization and comprehensive characterization, positions the docetaxel-loaded NLCs as promising candidates for advanced skin cancer therapy. The findings underscore the potential translational impact of these nanocarriers, paving the way for future preclinical investigations and clinical applications in skin cancer treatment.

Exploring the thermally-controlled fentanyl transdermal therapy to provide constant drug delivery by physics-based digital twins.

Transdermal drug delivery is suitable for low-molecular-weight drugs with specific lipophilicity, like fentanyl, which is widely used for cancer-induced pain management. However, fentanyl's transdermal therapy displays high intra-individual variability. Factors like skin characteristics at application sites and ambient temperature contribute to this variation. In this study, we developed a physics-based digital twin of the human body to cope with this variability and propose better adapted setups. This twin includes an in-silico skin model for drug penetration, a pharmacokinetic model, and a pharmacodynamic model. Based on the results of our simulations, applying the patch on the flank (side abdominal area) showed a 15.3 % higher maximum fentanyl concentration in the plasma than on the chest. Additionally, the time to reach this maximum concentration when delivered through the flank was 19.8 h, which was 10.3 h earlier than via the upper arm. Finally, this variation led to an 18 % lower minimum pain intensity for delivery via the flank than the chest. Moreover, the impact of seasonal changes on ambient temperature and skin temperature by considering the activity level was investigated. Based on our result, the fentanyl uptake flux by capillaries increased by up to 11.8 % from an inactive state in winter to an active state in summer. We also evaluated the effect of controlling fentanyl delivery by adjusting the temperature of the patch to alleviate the pain to reach a mild pain intensity (rated three on the VAS scale). By implementing this strategy, the average pain intensity decreased by 1.1 points, and the standard deviation for fentanyl concentration in plasma and average pain intensity reduced by 37.5 % and 33.3 %, respectively. Therefore, our digital twin demonstrated the efficacy of controlled drug release through temperature regulation, ensuring the therapy toward the intended target outcome and reducing therapy outcome variability. This holds promise as a potentially useful tool for physicians.

Ambient Moisture-Driven Self-Powered Iontophoresis Patch for Enhanced Transdermal Drug Delivery.

Iontophoretic transdermal drug delivery (TDD) devices are known to enhance the transdermal transport of drugs. However, conventional transdermal iontophoretic devices require external power sources, wired connections, or mechanical parts, which reduce the comfort level for patients during extended use. In this work, a self-powered, wearable transdermal iontophoretic patch (TIP) is proposed by harvesting ambient humidity for energy generation, enabling controlled TDD. This patch primarily uses moist-electric generators (MEGs) as its power source, thus obviating the need for complex power management modules and mechanical components. A single MEG unit can produce an open-circuit voltage of 0.80 V and a short-circuit current of 11.65 µA under the condition of 80% relative humidity. Amplification of the electrical output is feasible by connecting multiple generator units in series and parallel, facilitating the powering of certain commercial electronic devices. Subsequently, the MEG array is integrated with the TDD circuit to create the wearable TIP. After 20 min of application, the depth of drug penetration through the skin is observed to increase threefold. The effective promotion effect of TIP on the transdermal delivery of ionized drugs is corroborated by simulations and experiments. This wearable TIP offers a simple, noninvasive solution for TDD.

Ionic Liquid-Based Immunization Patch for the Transdermal Delivery of Antigens.

Herein, we report a transdermal patch prepared using an ionic liquid-based solid in oil (IL-S/O) nanodispersion and a pressure-sensitive adhesive (PSA) to deliver the macromolecular antigenic protein, ovalbumin (OVA). The IL-S/O nanodispersion and a PSA were first mixed at an equal weight ratio, then coated onto a release liner, and covered with a support film. To evaluate the effect of the PSA, three types of PSAs, DURO-TAK 87-4098, DURO-TAK 87-4287, and DURO-TAK 87-235A, were used to obtain the corresponding IL-S/O patches SP-4098, SP-4287, and SP-235A, respectively. The prepared IL-S/O patches were characterized for surface morphology, viscoelasticity, and moisture content. In vitro skin penetration and in vivo immunization studies of the IL-S/O patches were performed using Yucatan micropig skin and the C57BL/6NJc1 mice model, respectively. The SP-4098 and SP-4287 delivered 5.49-fold and 5.47-fold higher amounts of drug compared with the aqueous formulation. Although both patches delivered a similar amount of drug, SP-4287 was not detached fully from the release liner after 30 days, indicating low stability. Mice immunized with the OVA-containing SP-4098 produced a 10-fold increase in anti-OVA IgG compared with those treated with an aqueous formulation. These findings suggested that the IL-S/O patch may be a good platform for the transdermal delivery of antigen molecules.

Additive manufacturing of microneedles for sensing and drug delivery.

INTRODUCTION: Microneedles (MNs) are miniaturized, painless, and minimally invasive platforms that have attracted significant attention over recent decades across multiple fields, such as drug delivery, disease monitoring, disease diagnosis, and cosmetics. Several manufacturing methods have been employed to create MNs; however, these approaches come with drawbacks related to complicated, costly, and time-consuming fabrication processes. In this context, employing additive manufacturing (AM) technology for MN fabrication allows for the quick production of intricate MN prototypes with exceptional precision, providing the flexibility to customize MNs according to the desired shape and dimensions. Furthermore, AM demonstrates significant promise in the fabrication of sophisticated transdermal drug delivery systems and medical devices through the integration of MNs with various technologies. AREAS COVERED: This review offers an extensive overview of various AM technologies with great potential for the fabrication of MNs. Different types of MNs and the materials utilized in their fabrication are also discussed. Recent applications of 3D-printed MNs in the fields of transdermal drug delivery and biosensing are highlighted. EXPERT OPINION: This review also mentions the critical obstacles, including drug loading, biocompatibility, and regulatory requirements, which must be resolved to enable the mass-scale adoption of AM methods for MN production, and future trends.

Transdermal delivery system to release phthalocyanine photosensitizers for the potential treatment of skin cancer with PDT.

This research aims to examine the transdermal release of water-soluble indium and zinc metallo phthalocyanine (InPc and ZnPc) compounds from the poly(vinyl alcohol) (PVA) membrane and the cytotoxicity effect of these Pcs on normal mouse fibroblasts (L929 fibroblast) and human melanoma (SK-MEL-30) cells. For this purpose, the effects of temperature, pH, drug concentration and membrane thickness on transdermal release were investigated in order to obtain the optimum transdermal release profile by preparing PVA membranes with different thicknesses and crosslinked by heat treatment. Optimum drug release was found to be 85.36% using 6 µm thick PVA membrane at 37 ± 0.5 °C, when upper cell pH 1.2 and lower cell pH 5.5, for 3 mg/mL InPc drug concentration. Under the same conditions, the drug release value for ZnPc was found to be 69.78%. In addition, in vitro studies were performed on L929 and SK-MEL-30 cells. under optimized drug (InPc and ZnPc) and membrane conditions. It was found that no significant cytotoxic effect was observed in L929 and SK-MEL-30 cells in the dark. Photodynamic tests were also carried out with InPc and ZnPc. The results show that cell viability decreases in SK-MEL-30 cells at concentrations of 10 µg/mL and above. In addition, while the InPc IC50 value was determined as 4.058 µg/mL, this value was determined as 11.574 µg/mL for ZnPc.

Microneedles: An Efficient Technique to Increase Transdermal Drug Delivery System.

Transdermal Drug Delivery Systems (TDDS) have gained attention as a viable substitute for traditional drug administration methods because of their controlled release capabilities and non-invasive design. Microneedles are a new and effective technology that has attracted a lot of attention recently to enhance the capabilities of TDDS further. The study on microneedles and their potential to improve transdermal medication delivery is thoroughly reviewed in this review article. The study initiates by clarifying the difficulties linked to traditional medication delivery techniques and the benefits provided by transdermal channels. The article then explores the development of microneedle technology, outlining the several kinds of microneedles-solid, hollow, and dissolving-as well as their uses. Because of their special capacity to penetrate the skin's protective layer painlessly and their ability to distribute drugs precisely and precisely, microneedles are a highly useful instrument in pharmaceutical research. The materials, geometry, and manufacturing processes that affect the design and creation of microneedles are critically analyzed and presented. The manuscript delves into the latest developments in microneedle technology, encompassing the utilization of biodegradable polymers, smart materials, and sensing components for in-the-- moment monitoring. This analysis concludes by highlighting the noteworthy advancements in the field of microneedles and their potential to transform transdermal drug delivery systems. This thorough knowledge seeks to further the current discussion in pharmaceutical research, encouraging creativity and opening the door for the creation of safer, more effective drug delivery systems.

[Preparation and performance evaluation of fast dissolving polymer microneedles piggybacked with sitagliptin].

The dramatic rise in the number of obese/overweight people is a global public health challenge that urgently requires novel and effective therapies. In this study, we designed a fast dissolving polymer microneedle array patch (SGN-PVP/PVA-MN) with sitagliptin as a model drug for treating obesity, focusing on the preparation process of the patch. We then characterized the morphology and dimensions of SGN-PVP/PVA-MN. Furthermore, we delved into the mechanical properties, solubility, skin-puncturing capability, and transdermal drug diffusion and release kinetics of SGN-PVP/PVA-MN. The results demonstrated that SGN-PVP/PVA-MN exhibited favorable morphology and mechanical properties, effectively penetrating the stratum corneum and creating microchannels for rapid transdermal drug diffusion. The in vitro transdermal diffusion assays revealed the release of 64.5% of the drug within 2 min and 95.7% within 10 min. With rapid dissolution and high drug diffusion efficiency, SGN-PVP/PVA-MN is poised to serve as an effective and safe treatment option for the individuals with obesity.

Nanoformulation-assisted microneedle transdermal drug delivery system: An innovative platform enhancing rheumatoid arthritis treatment.

A transdermal delivery system offers high bioavailability and favorable patient adherence, constituting an optimal approach for localized administration in rheumatoid arthritis (RA) treatment. However, the stratum corneum (SC) impedes the delivery efficiency of conventional transdermal drug delivery systems. Microneedles (MNs) can temporarily create micropores within the SC, enabling drug distribution via bypassing this barrier and enhancing transdermal delivery effectiveness. Notably, MNs provide a painless method of drug delivery through the skin and may directly modulate inflammation in immune cells by delivering drugs via the lymphatic system during transdermal administration. However, the MN delivery system is not suitable for drugs with low water solubility and stability. Additionally, major concerns exist regarding the safety of using MN delivery for highly cytotoxic drugs, given that it could result in high local drug concentration at the delivery site. While MNs exhibit some degree of targeted delivery to the immune and inflammatory environment, their targeting efficiency remains suboptimal. Nanoformulations have the potential to significantly address the limitations of MNs in RA treatment by improving drug targeting, solubility, stability, and biocompatibility. Therefore, this review provides a concise overview of the advantages, disadvantages, and mechanisms of different types of MNs for RA treatment. It specifically focuses on the application and advantages of combining nanoformulation with MNs for RA treatment and summarizes the current trends in the development of nanoformulations combined with MNs in the field of RA treatment, offering theoretical support for future advancements and clinical applications.

A novel transdermal drug delivery system: drug-loaded ROS-responsive ferrocene fibers for effective photoprotective and wound healing activity.

The present study proposes an innovative transdermal drug delivery system using ferrocene-incorporated fibers to enhance the bioavailability and therapeutic efficacy of ascorbyl tetraisopalmitate. Using electrospinning technology, the authors created ferrocene polymer fibers capable of highly efficient drug encapsulation and controlled release in response to reactive oxygen species commonly found in wound sites. The approach improves upon previous methods significantly by offering higher drug loading capacities and sustained release, directly targeting diseased cells. The results confirm the potential of ferrocene fibers for localized drug delivery, potentially reducing side effects and increasing patient convenience. The method could facilitate the application of bioactive compounds in medical textiles and targeted therapy.

Comparaison of Efficacy and Safety of Fentanyl Transdermal Patch with Oral Ketorolac for Pain Management in Dry Socket: A Randomized Clinical Trial.

Objectives: The aim of this study was to compare the efficacy and safety of transdermal Fentanyl patch with oral Ketorolac for pain management in dry socket patients. Study design: Sixty patients who were diagnosed with dry socket (VAS > 40 mm) were recruited in this prospective randomized controlled trial. Patients were divided into two groups. Group1 (n = 30) Transdermal Fentanyl patch (25mcg/hr) was given and in Group 2 (n = 30) Ketorolac 10 mg Oral tablet was prescribed for pain management. The primary endpoint was the mean pain scores within 72 h evaluated by visual analog scale (VAS). Secondary measures included the safety and tolerability, amount of rescue medication (analgesic and antiemetic) and effectiveness of treatment interventions by Brief Pain Inventory Questionnaire (BPI). Results: The mean VAS pain scores were significantly less in group 1 (Fentanyl) as compared to group 2 (ketorolac) on all follow-up days. Significant difference was noted in the mean amount of rescue analgesic medication. It was 2.16 + 1.53 in group 1 and 8.50 + 3.98 in group 2. Side effects were seen in both the groups. Nausea (46%) and vomiting (43%) were reported in group 1 while headache (36.6%) and epigastric pain (53.3%) in group 2. Conclusions: Thus, transdermal Fentanyl was better in pain control than Ketorolac with less need for rescue analgesic medication in dry socket.

Split-scalp pilot study to evaluate effectiveness of Minoxidil 0,5% MMP® versus Topical Minoxidil 5% in the treatment of Female Pattern Hair Loss.

Female Pattern Hair Loss (FPHL) is a common form of non-scaring hair loss that occurs in adult women. Although several treatments have already been proposed for FPHL, only Topical Minoxidil accumulated an adequate level of evidence. This study aimed to evaluate the therapeutic response of MMP® (intradermal infiltration) of Minoxidil formulation in the frontal-parietal-vertex regions compared with the gold-standard home administration of Minoxidil 5% Capillary Solution. This self-controlled comparative study evaluated 16 FPHL patients, without treatment for at least 6 months, confirmed by trichoscopy with TrichoLAB® software. They received 4 monthly sessions of MMP® with Minoxidil 0,5% on the right side of the scalp (frontal-parietal-vertex areas), followed by occlusion with plastic film for 12 h and prescription of Minoxidil 5% Solution for home use once a day, on both scalp sides, starting 72 h after the procedure. The reassessment trichoscopy was 6 weeks after the last session and they answered a "self-assessment" questionnaire. Treated scalp areas were compared and showed both treatments, in general, were effective, with no difference between them. If they were analyzed separately by treated areas, there were signs of better response in the parietal-vertex regions with treatment by MMP® with Minoxidil, while clinical treatment indicated a better response in the other regions. When patients were divided into more and less advanced cases, a better response in parietal-vertex regions treated by MMP® with Minoxidil in less advanced patients was confirmed. MMP® with Minoxidil showed a better response in the parietal-vertex regions in less advanced FPHL patients. It represents yet another resource to improve quality of life of these suffering patients.

Application of biomacromolecule-based passive penetration enhancement technique in superficial tumor therapy: A review.

Transdermal drug delivery (TDD) has shown great promise in superficial tumor therapy due to its noninvasive and avoidance of the first-pass effect. Especially, passive penetration enhancement technique (PPET) provides the technical basis for TDD by temporarily altering the skin surface structure without requiring external energy. Biomacromolecules and their derived nanocarriers offer a wide range of options for PPET development, with outstanding biocompatibility and biodegradability. Furthermore, the abundant functional groups on biomacromolecule surfaces can be modified to yield functional materials capable of targeting specific sites and responding to stimuli. This enables precise drug delivery to the tumor site and controlled drug release, with the potential to replace traditional drug delivery methods and make PPET-related personalized medicine a reality. This review focuses on the mechanism of biomacromolecules and nanocarriers with skin, and the impact of nanocarriers' surface properties of nanocarriers on PPET efficiency. The applications of biomacromolecule-based PPET in superficial tumor therapy are also summarized. In addition, the advantages and limitations are discussed, and their future trends are projected based on the existing work of biomacromolecule-based PPET.