Transient Covalent Polymers through Carbodiimide-Driven Assembly.

Biochemical systems make use of out-of-equilibrium polymers generated under kinetic control. Inspired by these systems, many abiotic supramolecular polymers driven by chemical fuel reactions have been reported. Conversely, polymers based on transient covalent bonds have received little attention, even though they have the potential to complement supramolecular systems by generating transient structures based on stronger bonds and by offering a straightforward tuning of reaction kinetics. In this study, we show that simple aqueous dicarboxylic acids give poly(anhydrides) when treated with the carbodiimide EDC. Transient covalent polymers with molecular weights exceeding 15,000 are generated which then decompose over the course of hours to weeks. Disassembly kinetics can be controlled using simple substituent effects in the monomer design. The impact of solvent polarity, carbodiimide concentration, temperature, pyridine concentration, and monomer concentration on polymer properties and lifetimes has been investigated. The results reveal substantial control over polymer assembly and disassembly kinetics, highlighting the potential for fine-tuned kinetic control in nonequilibrium polymerization systems.

Switchable Organocatalysis from N-heterocyclic Carbene-Carbodiimide Adducts with Tunable Release Temperature.

N-Heterocyclic carbenes (NHCs) are powerful organocatalysts, but practical applications often require in situ generation from stable precursors that "mask" the NHC reactivity via reversible binding. Previously established "masks" are often simple small molecules, such that the NHC structure is used to control both catalytic activity and activation temperature, leading to undesirable tradeoffs. Herein, we show that NHC-carbodiimide (CDI) adducts can be masked precursors for switchable organocatalysis and that the CDI substituents can control the reaction profile without changing the NHC structure. Large electronic variations on the CDI (e.g., alkyl versus aryl) drastically change the catalytically active temperature, whereas smaller perturbations (e.g., different para-substituted phenyls) tune the catalyst release within a narrower window. This control was demonstrated for three classic NHC-catalyzed reactions, each influencing the NHC-CDI equilibrium in different ways. Our results introduce a new paradigm for controlling NHC organocatalysis as well as present practical considerations for designing appropriate masks for various reactions.

Diverse Reactions of α-Diimine-Ligated MgI -MgI -Bonded Compound with Carbodiimides.

The α-diimine-ligated dimagnesium(I) compound [K(thf)3 ]2 [LMg-MgL] (1, L=[(2,6-iPr2 C6 H3 )NC(Me)]2 2- ) displays diverse reactivities toward carbodiimides (RN=C=NR) with different R substituents. In the reaction of 1 with Me3 SiNCNSiMe3 , one of the easily leaving trimethylsilyl groups is lost to yield the Me3 SiNCN- moiety that either bridges two MgII centers (2) or terminally coordinated (3). In contrast, with the similarly bulky tBuNCNtBu, the carbodiimide inserts into Mg-Mg bond with accompanying C-H activation of a ligand or solvent (products 4 and 5). In the case of dicyclohexyl or diisopropyl carbodiimide, reductive C-C coupling of two RNCNR molecules occurs to form the [C2 (NR)4 ]2- diamido moiety, which bridges two Mg centers, giving complexes [{K(dme)2 }2 LMg(µ-{C2 (NR)4 })MgL] (6, R=Cy; 7, R=iPr) and [L⋅- Mg(µ-{C2 (NR)4 })MgL⋅- ] (8). Most interestingly, upon treating 1 with Me3 SiC≡CSiMe3 , the acetylide complex [K(dme)][LMg(C≡CSiMe3 )(dme)] (9) was prepared, which undergoes a rare "double insertion" with CyNCNCy to afford [K(solv)][K(dme)2 LMg(NCy)2 C-C≡C-C(NCy)2 MgL] (10) containing an acetylenediide-coupled bis(amidinate) ligand that bridges two Mg atoms.

Influence of two carbodiimides on the bond strength of universal adhesives to dentin.

The pretreatment of dentin with cross-linking agents during bonding procedures has been proposed to improve the mechanical properties of the collagen in the hybrid layer and reduce the biodegradation of the adhesive interface. The aim of this study was to evaluate the influence of pretreatment with two carbodiimides on the dentin bond strength of universal adhesives, after thermocycling. Three universal adhesives in the self-etching mode were used (Single Bond Universal-SBU, Clearfil Universal-CLU and Ambar Universal-ABU). A self-etching adhesive system (Clearfil SE Bond-CSB) was used as control. Two carbodiimides, 1-ethyl-3-(3'-dimethylaminopropyl)-carbodiimide (EDC) and N,N'-dicyclohexylcarbodiimide (DCC), were applied for 1 min. The excess solution was removed with absorbent paper and the universal adhesives were applied. The specimens were stored for 24 h in distilled water at 37 °C or 10,000 thermal cycles (5-55 °C, 30 s) and then were prepared for microtensile bond strength test (n = 4 teeth, average of 21 sticks per group). Data were analyzed using three-way ANOVA and Tukey's (α = 5%). After 24 h, SBU and CSB had statistically similar bond strength values for the control groups (22.07 ± 9.03 and 19.82 ± 7.28 MPa), with EDC (30.21 ± 11.30 and 19.67 ± 5.36 MPa) and DCC (30.12 ± 13.43 and 19.82 ± 7.28 MPa) pretreatments (p > 0.05). The use of EDC (32.57 ± 9.60 MPa) and DCC (24.71 ± 9.87 MPa) showed statistically higher bond strength for CLU than for the control group (14.62 ± 6.16 MPa; p < 0.05). After thermocycling, the SBU, CLU, and CSB groups showed statistically similar bond strengths with the use of EDC (27.08 ± 8.44; 18.74 ± 5.41; and 24.55 ± 10.43 MPa) and without the use of cross linkers (20.06 ± 7.99; 22.55 ± 9.04; and 26.54 ± 10.13 MPa; p > 0.05). Groups tested after 24 h in distilled water presented higher bond strength than those submitted to thermocycling. It can be concluded that the use of cross linkers influenced the immediate bond strength of the universal adhesives, and this was dependent on the combination of the adhesive system and type of carbodiimide. The use of EDC increased the immediate bond strength of CLU. DCC increased the bond strength of ABU at 24 h, but the values were lower than those of the control group after aging for three out of the four adhesives.

Dentin Cross-linking Effect of Carbodiimide After 5 Years.

Carbodiimide (EDC)-based dentin primers preserve hybrid layer (HL) integrity. However, aging >1 y has not been investigated. The present study examined whether the cross-linking effect of EDC was reflected in dentin bond strength, endogenous enzymatic activity, and the chemical profile of the HL after 5-y aging in artificial saliva. Noncarious human third molars (N = 42) were cut to expose middle/deep coronal dentin and treated as follows: group 1, dentin etched with 35% H3PO4, pretreated with a 0.3M aqueous EDC primer for 1 min and restored with XP Bond (Dentsply Sirona); group 2, as in group 1 but without EDC pretreatment; group 3, Clearfil SE Bond (Kuraray-Noritake) primer applied to dentin surface, followed by EDC pretreatment as in group 1 and application of bond; group 4, as in group 3 without EDC pretreatment. After composite buildup, the specimens were cut into sticks or slabs, depending on the experiment. All tests were performed at baseline (T0) and after 5 y of aging (T5) in artificial saliva at 37 °C. Microtensile bond strength (µTBS) was tested at a crosshead speed of 1 mm/min until failure. Endogenous enzymatic activity was investigated with in situ zymography. The chemical profile of HL was determined via Raman spectroscopy. Three-way analysis of variance and post hoc Tukey test were used to analyze µTBS and in situ zymography data (α = 0.05). EDC pretreatment and aging significantly influenced µTBS and in situ zymography results (P < 0.05). Higher bond strength and lower gelatinolytic activity were identified in the EDC-treated groups at T5 (P < 0.05), especially in the etch-and-rinse groups. Raman spectra revealed less defined amide III peaks in control specimens at T5. The EDC cross-linking effect persisted in the HL for 5 y in terms of bond strength, collagen structure preservation, and dentinal enzyme silencing.

Synthesis of Chromium(II) Complexes with Chelating Bis(alkoxide) Ligand and Their Reactions with Organoazides and Diazoalkanes.

Synthesis of new chromium(II) complexes with chelating bis(alkoxide) ligand [OO]Ph (H2[OO]Ph = [1,1':4',1''-terphenyl]-2,2''-diylbis(diphenylmethanol)) and their subsequent reactivity in the context of catalytic production of carbodiimides from azides and isocyanides are described. Two different Cr(II) complexes are obtained, as a function of the crystallization solvent: mononuclear Cr[OO]Ph(THF)2 (in toluene/THF, THF = tetrahydrofuran) and dinuclear Cr2([OO]Ph)2 (in CH2Cl2/THF). The electronic structure and bonding in Cr[OO]Ph(THF)2 were probed by density functional theory calculations. Isolated Cr2([OO]Ph)2 undergoes facile reaction with 4-MeC6H4N3, 4-MeOC6H4N3, or 3,5-Me2C6H3N3 to yield diamagnetic Cr(VI) bis(imido) complexes; a structure of Cr[OO]Ph(N(4-MeC6H4))2 was confirmed by X-ray crystallography. The reaction of Cr2([OO]Ph)2 with bulkier azides N3R (MesN3, AdN3) forms paramagnetic products, formulated as Cr[OO]Ph(NR). The attempted formation of a Cr-alkylidene complex (using N2CPh2) instead forms chromium(VI) bis(diphenylmethylenehydrazido) complex Cr[OO]Ph(NNCPh2)2. Catalytic formation of carbodiimides was investigated for the azide/isocyanide mixtures containing various aryl azides and isocyanides. The formation of carbodiimides was found to depend on the nature of organoazide: whereas bulky mesitylazide led to the formation of carbodiimides with all isocyanides, no carbodiimide formation was observed for 3,5-dimethylphenylazide or 4-methylphenylazide. Treatment of Cr2([OO]Ph)2 or H2[OO]Ph with NO+ leads to the formation of [1,2-b]-dihydroindenofluorene, likely obtained via carbocation-mediated cyclization of the ligand.

Quantum-Chemical Study of the FeNCN Conversion-Reaction Mechanism in Lithium- and Sodium-Ion Batteries.

We report a computational study on 3d transition-metal (Cr, Mn, Fe, and Co) carbodiimides in Li- and Na-ion batteries. The obtained cell voltages semi-quantitatively fit the experiments, highlighting the practicality of PBE+U as an approach for modeling the conversion-reaction mechanism of the FeNCN archetype with lithium and sodium. Also, the calculated voltage profiles agree satisfactorily with experiment both for full (Li-ion battery) and partial (Na-ion battery) discharge, even though experimental atomistic knowledge is missing up to now. Moreover, we rationalize the structural preference of intermediate ternaries and their characteristic lowering in the voltage profile using chemical-bonding and Mulliken-charge analysis. The formation of such ternary intermediates for the lithiation of FeNCN and the contribution of at least one ternary intermediate is also confirmed experimentally. This theoretical approach, aided by experimental findings, supports the atomistic exploration of electrode materials governed by conversion reactions.

An N-Heterocyclic-Carbene-Derived Distonic Radical Cation.

We present the discovery of a novel radical cation formed through one-electron oxidation of an N-heterocyclic carbene-carbodiimide (NHC-CDI) zwitterionic adduct. This compound possesses a distonic electronic structure (spatially separate spin and charge regions) and displays persistence under ambient conditions. We demonstrate its application in a redox-flow battery exhibiting minimal voltage hysteresis, a flat voltage plateau, high Coulombic efficiency, and no performance decay for at least 100 cycles. The chemical tunability of NHCs and CDIs suggests that this approach could provide a general entry to redox-active NHC-CDI adducts and their persistent radical ions for various applications.

Dentine collagen cross-linking using tiopronin-protected Au/EDC nanoparticles formulations.

OBJECTIVE: The aim of this study was to investigate EDC-assisted collagen crosslinking effect with different concentrations of tiopronin-protected gold (TPAu) nanoparticles on demineralized dentine. METHODS: TPAu nanoparticles were fabricated from 0.31-g tetrachloroauric acid and 0.38-g of N-(2-mercaptopropionyl) glycine (2.4-mmol). Then co-dissolved using 35-mL of 6:1 methanol/acetic acid and mixed using NaBH4. EDC (0.3-M) was conjugated to TPAu nanoparticles at TPAU/EDC-0.25:1, and TPAU/EDC-0.5:1 treatment formulations ratios. Dentin specimens treated with 0.3-M EDC solution alone or left untreated were used as control. Nanoparticles formulations were characterized in term of particles morphology and size, Zeta potential, thermogravimetric analysis and small-angle X-ray scattering. Dentin substrates were characterized in term of TEM investigation, dentin proteases characterization, hydroxyproline liberation, elastic modulus measurement, Raman analysis and confocal microscopy viewing. RESULTS: TEM evaluation of tiopronin protected gold nanoparticles dispersion revealed nano-clusters formations in both groups. However, based on our TEM measurements, the particle-size was ranging from ˜20 to 50 nm with spherical core-shape which were almost similar for both TPAu/EDC ratios (0.5:1 and 0.25:1). Zeta potential measurements indicate negative nanoparticles surface charge. SAXS profiles for both formulations, suggest a typical profile for uni-lamellar nanoparticles. Superior dentin collagen cross-linking effect was found with the TPAu/EDC nanoparticles formulations compared to the control and EDC treated groups. SIGNIFICANCE: Cross-linking of dentin collagen using TPAu coupled with EDC through TPAu/EDC nanoparticles formulations is of potential significance in improving the biodegradation resistance, proteases inhibition, mechanical and structural stability of demineralized dentin substrates. In addition, the cross-linking effect is dependent on TPAu/EDC ratio, whereas higher cross-linking effect was found at TPAu/EDC ratio of 0.5:1.

Recent Insights into Effective Nanomaterials and Biomacromolecules Conjugation in Advanced Drug Targeting.

Targeted drug delivery, also known as smart drug delivery or active drug delivery, is a subcategory of nanomedicine. Using this strategy, the medication is delivered into the infected organs in the patient's body or to the targeted sites inside the cells. In order to improve therapeutic efficiency and pharmacokinetic characteristics of the active pharmaceutical agents, conjugation of biomacromolecules such as proteins, nucleic acids, monoclonal antibodies, aptamers, and nanoparticulate drug carriers, has been mostly recommended by scientists in the last decades. Several covalent conjugation pathways are used for biomacromolecules coupling with nanomaterials in nanomedicine including carbodiimides and "click" mediated reactions, thiol-mediated conjugation, and biotin-avidin interactions. However, choosing one or a combination of these methods with suitable coupling for application to advanced drug delivery is essential. This review focuses on new and high impacted published articles in the field of nanoparticles and biomacromolecules coupling studies, as well as their advantages and applications.

Synthesis and Reactivity of Cyclic Borane-Amidine Conjugated Molecules Formed by Direct 1,2-Carboboration of Carbodiimides with 9-Borafluorenes.

Efficient 1,2-carboboration reactions to the C=N bond of carbodiimides with 9-borafluorenes, which give rise to cyclic borane-amidine conjugates with a seven-membered BNC5 ring, are reported. The resulting cyclic borane-amidine conjugates can be hydrolyzed into an acyclic bifunctional biaryl compound carrying both boronic acid and amidine groups, rendering the utility of the two-step protocol for the synthesis of multi-functionalized molecular systems with a potential as a supramolecular building block. Furthermore, the conjugated structure of the cyclic boron-amidine compounds can be changed upon alkylation of the boron atom that increases the coordination number of boron. The combination of Lewis acid (borane) and conjugated base (amidine) provides rich structural diversity of heteroatom-containing π-conjugated systems.

Metal-Free and Alkali-Metal-Catalyzed Synthesis of Isoureas from Alcohols and Carbodiimides.

The first addition of alcohols to carbodiimides catalyzed by transition-metal-free compounds employs 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) and its alkali metal salts. Isoureas are obtained in short reaction times and high yields when TBDK is used as the catalyst. Control of the coordination sphere of potassium with exogenous chelating ligands, in combination with mechanistic DFT calculations, demonstrated the role and positive influence of the alkali-metal cation on the kinetics.

Enzymatic Kinetic Resolution of Secondary Alcohols Using an Ionic Anhydride Generated In†Situ.

We developed a method for the resolution of secondary alcohols using an ionic anhydride acylating agent prepared directly in the reaction medium containing the biocatalyst Candida antarctica lipase B (CALB). NMR studies showed that mixing all components at the same time does not interfere with the coupling reaction or the enzymatic activity. After optimization of the reaction conditions, the method allowed the resolution of a number of substrates in very high conversions (46-48 %) and enantiomeric ratios (E>170) along with an easy recovery of both enantiomers without the need for preparative chromatographic separation. Additionally, both the starting ionic acid and the biocatalyst could be recovered and reused up to nine cycles without significant loss of enantioselectivity.

Comparison of glutaraldehyde and carbodiimides to crosslink tissue engineering scaffolds fabricated by decellularized porcine menisci.

The objectives of this study were to fabricate porous scaffolds using decellularized meniscus, and to explore a preferable crosslinking condition to enhance mechanical properties of scaffolds. Moreover, the microstructure, porosity, biodegradation and cytotoxicity were also evaluated. EDAC or GTA in different concentration was used to crosslink scaffolds. FTIR demonstrated functional groups change in crosslinking process. SEM photography showed that crosslinked scaffolds had blurry edges, which resulted scaffolds crosslinked by 1.2mol/l EDAC had smaller porosity than other groups. The structure change enhanced antidegradation property. After immersing in enzyme solution for 96h, scaffolds crosslinked by GTA and EDAC could maintain their mass >70% and 80%. Most importantly, mechanical properties of crosslinked scaffolds were also improved. Uncrosslinked Scaffolds had only 0.49kPa in compression modulus and 12.81kPa in tensile modulus. The compression and tensile modulus of scaffolds crosslinked by 1.0% GTA were 1.42 and 567.44kPa respectively. The same value of scaffolds crosslinked by 1.2mol/l EDAC were 1.49 and 532.50kPa. Scaffolds crosslinked by 1.0% and 2.5% GTA were toxic to cells, while EDAC groups showed no cytotoxicity. Chondrocytes could proliferate and infiltrate within scaffolds after seeding. Overall, 1.2mol/l EDAC was a preferable crosslinking condition.

Synthesis of 2,3-Disubstituted Quinolines via Ketenimine or Carbodiimide Intermediates.

Cyclopenta[b]quinolines and cyclohexa[b]quinolines were prepared via the reactions of α-diazo ketones with N-(2-cyclopropylidenemethylphenyl)phosphanimines and N-(2-cyclobutylidenemethylphenyl) phosphanimine, respectively. The reaction proceeds in a cascade involving ketenimine formation, 6 π-electron ring closure, and 1,3-alkyl shift. A similar approach was developed for the synthesis of dihydropyrrolo-[2,3-b]quinolines from N-(2-cyclopropylidenemethylphenyl)phosphanimines and isocyanates.

Solving the puzzling competition of the thermal C(2)-C(6) vs Myers-Saito cyclization of enyne-carbodiimides.

The mechanism of the thermal cyclization of enyne-carbodiimides 7a-c has been studied computationally by applying the DFT method. The results indicate that enyne-carbodiimides preferentially follow the C(2)-C(6) (Schmittel) cyclization pathway in a concerted fashion although the Myers-Saito diradical formation is kinetically preferred. The experimentally verified preference of the C(2)-C(6) over the Myers-Saito pathway is guided by the inability of the Myers-Saito diradical to kinetically compete in the rate-determining trapping reactions, either inter- or intramolecular, with the concerted C(2)-C(6) cyclization. As demonstrated with enyne-carbodiimide 11, the Myers-Saito channel can be made the preferred pathway if the trapping reaction by hydrogen transfer is no more rate determining.

Stimuli-Responsive Frustrated Lewis-Pair-Type Reactivity of a Tungsten Iminoazaphosphiridine Complex.

Reactions of 3-imino-azaphosphiridine complexes 1 a,b with carbodiimides 2 a,b, isocyanates 3 a,b, and carbon dioxide are described. Whereas exchange of the carbodiimide unit occurs in the first case, an overall ring expansion takes place with phenyl isocyanate (3 a) and carbon dioxide to yield complexes 4 and 5 bearing novel 1,3,5-oxazaphospholane ligands; the isopropyl derivative 3 b did not react under these conditions. DFT calculations provide insight into the pathway of the reaction with carbon dioxide with model complex 1 c, revealing effects of initial non-covalent interactions with the substrate onto the ring bonding, thus triggering an initially masked frustrated Lewis-pair-type behavior.

Actinide-mediated catalytic addition of E-H bonds (E=N, P, S) to carbodiimides, isocyanates, and isothiocyanates.

Unprecedented catalytic reactivity of actinide coordination complexes toward heterocumulenes, such as carbodiimides, isocyanates, and isothiocyanates is reported. The mono(imidazolin-2-iminato) thorium(IV) complex [Th(Im(Dipp) N){N(SiMe3 )2 }3 ] (1) was applied as a precatalyst for the addition of EH (E=N, P, S) bonds to the YCX core (Y=R2 N; X=NR2 , O, S) of carbodiimides, isocyanates, and isothiocyanates. The respective insertion products were obtained in high yields under mild reaction conditions, with complex 1 displaying high tolerance toward functional groups and heteroatoms.

Synthesis and Mechanistic Study of Cyclic Oxoguanidines via Zn(OTf)2 -Catalyzed Guanylation/Amidation from Readily Available Amino Acid Esters and Carbodiimides.

The Zn(OTf)2 -catalyzed guanylation/amidation from readily available amino acid esters and carbodiimides is achieved to provide efficiently various cyclic oxoguanidines, including 2-amino-1H-imidazol-5(4H)-ones and 2-aminoquinazolin-4(3H)-ones in medium-to-high yields. It is the first time that an ammonium salt has been used in a guanylation reaction. The application of cyclic oxoguanidines to provide the conjugated heterocyclic compounds via oxidative C-N formation or aldol reaction is explored. The reaction mechanism is well elucidated by the isolation and characterization of three important intermediates.

A direct access to heptasubstituted biguanides.

An efficient and experimentally simple copper-catalyzed carbon-nitrogen bond formation for the synthesis of [Formula: see text]-arylated biguanides starting from aryl halides, carbodiimides, and 1,1,3,3-tetramethylguanidine is reported. The potential diversity of this type of reaction, easily available starting materials, and commercially available low-cost catalysts are the incremental features of this methodology.