Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 213
Filter
1.
Adv Mater ; : e2406550, 2024 Jul 25.
Article in English | MEDLINE | ID: mdl-39054732

ABSTRACT

A promising kind of ternary chiral co-assemblies with high PLQY, large dissymmetry factor (glum), and narrowband multi-resonance characteristics are achieved by codoped-thermal annealing treatments of achiral luminescent polymer F8BT, chiral inducers R/S-5011, and achiral FRET acceptor DBN-ICZ. The optimized co-assemblies (F8BT)0.9-(R/S-5011)0.1-(DBN-ICZ)0.005 display narrowband yellow emission with full-width half maximum (FWHM) of 37 nm, PLQY of 79%, and intense CPL signals with |glum| of up to 0.26. Meaningfully, solution-processed CP-OLEDs by using those ternary chiral co-assemblies as emitting layer are successfully fabricated, which display yellow circularly polarized electroluminescence (CPEL) with EQEmax of 4.6% and gEL of up to 0.16. The corresponding Q-factor could reach up to 7.36 × 10-3, which is the highest of all the reported CP-OLEDs. Moreover, the devices also exhibit excellent comprehensive device performance with low Von of 7.0 V, high Lmax of about 25 000 cd m-2, extremely low efficiency roll-off with EQE of 4.3% at 10 000 cd m-2, as well as narrowband EL with FWHM of only 39 nm. The proposed ternary co-assembly strategy in fabricating CP-OLED provides the possibility to achieve high comprehensive device performance such as balancing high EQE and large gEL value, as well as narrowband emission, high brightness and low efficiency roll-off simultaneously.

2.
Small ; : e2403438, 2024 Jul 08.
Article in English | MEDLINE | ID: mdl-38978442

ABSTRACT

The role of macromolecule-macromolecule and macromolecule-H2O interactions and the resulting perturbation of the H-bonded network of H2O in the liquid-liquid phase separation (LLPS) process of biopolymers are well-known. However, the potential of the hydrated state of supramolecular structures (non-covalent analogs of macromolecules) of synthetic molecules is not widely recognized for playing a similar role in the LLPS process. Herein, LLPS occurred during the co-assembly of hydrated supramolecular vesicles (bolaamphiphile, BA1) with a net positive charge (zeta potential, ζ = +60 ± 2 mV) and a dianionic chiral molecule (disodium l-[+]-tartrate) is reported. As inferred from cryo-transmission electron microscopy (TEM), the LLPS-formed droplets serve as the nucleation precursors, dictating the structure and properties of the co-assembly. The co-assembled structure formed by LLPS effectively integrates the counter anion's asymmetry, resulting in the formation of ultrathin free-standing, chiral 2D crystalline sheets. The significance of the hydrated state of supramolecular structures in influencing LLPS is unraveled through studies extended to a less hydrated supramolecular structure of a comparable system (BA2). The role of LLPS in modulating the hydrophobic interaction in water paves the way for the creation of advanced functional materials in an aqueous environment.

3.
Environ Res ; 261: 119688, 2024 Jul 27.
Article in English | MEDLINE | ID: mdl-39074771

ABSTRACT

Thermal stratification in lakes and reservoirs may intensify and become more persistent with global warming. Periodic thermal stratification is a naturally occurring phenomenon that indicates a transition in aquatic ecosystem homeostasis, which could lead to the deterioration of water quality and impaired aquatic communities. However, the responses of communities and associated nutrient cycling processes to periodic thermal stratification are still poorly understood. This study delved into the changes in water quality, algal-bacterial communities, and functional diversity influenced by thermal stratification succession, and their relationship with nutrient cycling. The results indicated that the apparent community dynamics were driven by environmental factors, with ammonium (NH4+) and nitrate (NO3--N) being the most important factors that influenced the algal and bacterial community structure, respectively. Ecological niche widths were narrower during thermal stratification, exacerbating the antagonism of the communities, and stochastic processes dominated community assembly. Then, the complexities of the co-occurrence network decreased with succession. Algal community assembly became more deterministic, while bacterial assembly became more stochastic. Moreover, the roles of algal-bacterial multidiversity in nutrient cycling differed: bacterial diversity enhanced nutrient cycling, whereas algal diversity had the opposite effect. These findings broadened our understanding of microbial ecological mechanisms to environmental change and provided valuable ecological knowledge for securing water supplies in drinking water reservoirs.

4.
Polymers (Basel) ; 16(11)2024 Jun 03.
Article in English | MEDLINE | ID: mdl-38891533

ABSTRACT

The synthesis of polymer brushes on inorganic particles is an effective approach to surface modification. The polymer brushes on the surface endow the substrates with new surface properties. However, the lack of functional groups and the difficulty of surface modification have made it difficult to develop an effective method for the synthesis of polymer brushes on metal surfaces. Herein, a simple and versatile strategy for synthesizing polymer brushes on copper particles is reported. Tannic acid (TA) molecules are adsorbed onto the surfaces of copper particles, forming TA coatings. Quaternized poly(2-(dimethylamino)ethyl methacrylate)-block-polystyrene (qPDMAEMA-b-PS) block copolymer (BCP) chains are grafted on the TA coatings through hydrogen bonding and electrostatic interaction, and PS brushes are grafted on the copper particles. The effects of TA concentration on the adsorption of TA and PS brush synthesis are discussed. The PS brushes are able to form surface nanostructures on the copper particles through co-assembly with PDMAEMA-b-PS BCP chains. The effect of BCP concentration on the surface nanostructures is investigated. It is reasonable to expect that polymer brushes and surface nanostructures can be synthesized on different metal surfaces by using the TA-coating approach reported in this paper.

5.
Sci Total Environ ; 943: 173821, 2024 Sep 15.
Article in English | MEDLINE | ID: mdl-38866165

ABSTRACT

Nanoformulations of pesticides are an effective way to increase utilization efficiency and alleviate the adverse impacts on the environments caused by conventional pesticide formulations. However, the complex preparation process, high cost, and potential environmental risk of nanocarriers severely restricted practical applications of carrier-based pesticide nanoformulations in agriculture. Herein, carrier-free self-assembled nanoparticles (FHA-PRO NPs) based on fenhexamid (FHA) and prochloraz (PRO) were developed by a facile co-assembly strategy to improve utilization efficiency and reduce toxicity to aquatic organism of pesticides. The results showed that noncovalent interactions between negatively charged FHA and positively charged PRO led to core-shell structured nanoparticles arranged in an orderly manner dispersing in aqueous solution with a diameter of 256 nm. The prepared FHA-PRO NPs showed a typical pH-responsive release profile and exhibited excellent physicochemical properties including low surface tension and high max retention. The photostability of FHA-PRO NPs was improved 2.4 times compared with free PRO. The FHA-PRO NPs displayed superior fungicidal activity against Sclerotinia sclerotiorum and Botrytis cinerea and longer duration against Sclerotinia sclerotiorum on potted rapeseed plants. Additionally, the FHA-PRO NPs reduced the acute toxicity of PRO to zebrafish significantly. Therefore, this work provided a promising strategy to develop nanoformulations of pesticides with stimuli-responsive controlled release characteristics for precise pesticide delivery.


Subject(s)
Fungicides, Industrial , Imidazoles , Nanoparticles , Water Pollutants, Chemical , Nanoparticles/toxicity , Nanoparticles/chemistry , Animals , Water Pollutants, Chemical/chemistry , Water Pollutants, Chemical/toxicity , Imidazoles/chemistry , Imidazoles/toxicity , Fungicides, Industrial/toxicity , Fungicides, Industrial/chemistry , Zebrafish , Aquatic Organisms/drug effects , Pesticides/toxicity , Pesticides/chemistry , Botrytis/drug effects , Ascomycota/drug effects
6.
Adv Mater ; : e2407705, 2024 Jun 25.
Article in English | MEDLINE | ID: mdl-38925587

ABSTRACT

Polyoxometalates (POMs) have been considered one of the most promising anode candidates for lithium-ion batteries (LIBs) in virtue of their high theoretical capacity and reversible multielectron redox properties. However, the poor intrinsic electronic conductivity, low specific surface area, and high solubility in organic electrolytes hinder their widespread applications in LIBs. Herein, a novel hybrid nanomaterial is synthesized by co-assembling POMs and porphyrins (PMo12/CoTPyP) through a facile solvothermal method. The POM clusters are stabilized by porphyrin units through electrostatic interactions, which simultaneously realize the uniform dispersion of POMs and porphyrin units. Benefiting from the generated sub-1 nm channels for fast ion transport and the synergistic effect between evenly distributed PMo12 clusters and high-conductive CoTPyP units, the LIB based on the optimized PMo12/CoTPyP anode exhibits significantly improved Li+ storage capability as well as superior rate and cycling performance. The results of density functional theory simulations further reveal that the co-assembly of PMo12 and CoTPyP can accelerate the mobility of Li+ and electrons, which in turn promotes the enhancement of LIBs performance. This work paves a strategy for synthesizing POMs-based anode materials with simultaneously high dispersibility, redox activity, and stability.

7.
J Pept Sci ; : e3626, 2024 May 29.
Article in English | MEDLINE | ID: mdl-38810988

ABSTRACT

Polylactide (PLA), a biocompatible and biodegradable polymer, is widely used in diverse biomedical applications. However, the industry standard for converting lactide into PLA involves toxic tin (Sn)-based catalysts. To mitigate the use of these harmful catalysts, other environmentally benign metal-containing agents for efficient lactide polymerization have been studied, but these alternatives are hindered by complex synthesis processes, reactivity issues, and selectivity limitations. To overcome these shortcomings, we explored the catalytic activity of Cu-(Phe)2 and Zn-(Phe)2 metal-amino acid co-assemblies as potential catalysts of the ring-opening polymerization (ROP) of lactide into PLA. Catalytic activity of the assemblies was monitored at different temperatures and solvents using 1H-NMR spectroscopy to determine the catalytic parameters. Notably, Zn-(Phe)2 achieved >99% conversion of lactide to PLA within 12 h in toluene under reflux conditions and was found to have first-order kinetics, whereas Cu-(Phe)2 exhibited significantly lower catalytic activity. Following Zn-(Phe)2-mediated catalysis, the resulting PLA had an average molecular weight of 128 kDa and a dispersity index of 1.25 as determined by gel permeation chromatography. Taken together, our minimalistic approach expands the realm of metal-amino acid-based supramolecular catalytic nanomaterials useful in the ROP of lactide. This advancement shows promise for the future design of simplified biocatalysts in both industrial and biomedical applications.

8.
Molecules ; 29(10)2024 May 12.
Article in English | MEDLINE | ID: mdl-38792147

ABSTRACT

The organization of modifiable and functional building components into various superstructures is of great interest due to their broad applications. Supramolecular self-assembly, based on rationally designed building blocks and appropriately utilized driving forces, is a promising and widely used strategy for constructing superstructures with well-defined nanostructures and diverse morphologies across multiple length scales. In this study, two homogeneous organohydrogels with distinct appearances were constructed by simply mixing polyoxometalate (phosphomolybdic acid, HPMo) and a double-tailed zwitterionic quaternary ammonium amphiphile in a binary solvent of water and dimethyl sulfoxide (DMSO). The delicate balance between electrostatic attraction and repulsion of anionic HPMo clusters and zwitterionic structures drove them to co-assemble into homogeneous organohydrogels with diverse microstructures. Notably, the morphologies of the organohydrogels, including unilamellar vesicles, onion-like vesicles, and spherical aggregates, can be controlled by adjusting the ionic interactions between the zwitterionic amphiphiles and phosphomolybdic acid clusters. Furthermore, we observed an organohydrogel fabricated with densely stacked onion-like structures (multilamellar vesicles) consisting of more than a dozen layers at certain proportions. Additionally, the relationships between the self-assembled architectures and the intermolecular interactions among the polyoxometalate, zwitterionic amphiphile, and solvent molecules were elucidated. This study offers valuable insights into the mechanisms of polyoxometalate-zwitterionic amphiphile co-assembly, which are essential for the development of materials with specific structures and emerging functionalities.

9.
ACS Appl Mater Interfaces ; 16(20): 26604-26612, 2024 May 22.
Article in English | MEDLINE | ID: mdl-38723622

ABSTRACT

One of the most important factors for the future application of circularly polarized luminescence (CPL) materials is their high dissymmetry factors (gem), and more and more studies are working tirelessly to focus on increasing the gem value. Herein, we chose an achiral liquid crystal polymer (LC-P) and two chiral binaphthyl-based inducers (R/S-3 and R/S-6) with different substitution positions (3,3' positions for R/S-3 and 6,6' positions for R/S-6) to construct chiral co-assemblies and explored their induced amplification CPL behaviors. Interestingly, after the thermal annealing treatment, this kind of chiral co-assembly (R/S-3)0.05-(LC-P)0.95 can emit a superior CPL signal (|gem| = 0.31 and λem = 424 nm), which achieves about 13-fold signal amplification in the spin-coated film, compared to (R/S-6)0.1-(LC-P)0.9 (|gem| = 0.023 and λem = 424 nm). This is because (R/S-3)0.05-(LC-P)0.95 could further co-assemble to form a more ordered arrangement LC state and generate regular helix nanofibers than that of (R/S-6)0.1-(LC-P)0.9. This work provides an efficient method for synthesizing high-quality CPL-active materials through the strategic manipulation of the structure of chiral binaphthyl-based inducers in chiral co-assembled LCP systems.

10.
Adv Sci (Weinh) ; : e2401478, 2024 May 24.
Article in English | MEDLINE | ID: mdl-38785178

ABSTRACT

To ensure compositional consistency while mitigating potential immunogenicity for stem cell therapy, synthetic scaffolds have emerged as compelling alternatives to native extracellular matrix (ECM). Substantial progress has been made in emulating specific natural traits featuring consistent chemical compositions and physical structures. However, recapitulating the dynamic responsiveness of the native ECM involving chemical transitions and physical remodeling during differentiation, remains a challenging endeavor. Here, the creation of adaptive scaffolds is demonstrated through sequential protein-instructed molecular assembly, utilizing stage-specific proteins, and incorporating in situ assembly technique. The procedure is commenced by introducing a dual-targeting peptide at the onset of stem cell differentiation. In response to highly expressed integrins and heparan sulfate proteoglycans (HSPGs) on human mesenchymal stem cell (hMSC), the peptides assembled in situ, creating customized extracellular scaffolds that adhered to hMSCs promoting osteoblast differentiation. As the expression of alkaline phosphatase (ALP) and collagen (COL-1) increased in osteoblasts, an additional peptide is introduced that interacts with ALP, initiating peptide assembly and facilitating calcium phosphate (CaP) deposition. The growth and entanglement of peptide assemblies with collagen fibers efficiently incorporated CaP into the network resulting in an adaptive biphasic scaffold that enhanced healing of bone injuries.

11.
Small ; : e2312099, 2024 Apr 21.
Article in English | MEDLINE | ID: mdl-38644335

ABSTRACT

Investigations of host-guest interactions at water-oil (w/o) interfaces are limited in single emulsion systems producing simple self-assembled objects with limited uses. Here, within hierarchically ordered water-in-oil-in-water (w/o/w) multiple emulsion droplets, interfacial self-assembly of (polynorbornene-graft-polystyrene)-block-(polynorbornene-graft-polyethylene glycol) (PNPS-b-PNPEG) bottlebrush block copolymers can be precisely controlled through host-guest interactions. α-Cyclodextrin (α-CD) in the aqueous phase can thread onto PEG side chains of the bottlebrush surfactants adsorbed at the w/o interface, leading to dehydration and collapsed chain conformation of the PEG block. Consequently, spherical curvature of the w/o internal droplets increases with the increased asymmetry of the bottlebrush molecules, producing photonic supraballs with precisely tailored structural parameters as well as photonic bandgaps. This work provides a simple but highly effective strategy for precise manipulation of complex emulsion systems applicable in a variety of applications, such as photonic pigments, cosmetic products, pesticides, artificial cells, etc.

12.
J Adv Res ; 2024 Apr 01.
Article in English | MEDLINE | ID: mdl-38570015

ABSTRACT

BACKGROUND: The construction of gels from low molecular weight gelators (LMWG) has been extensively studied in the fields of bio-nanotechnology and other fields. However, the understanding gaps still prevent the prediction of LMWG from the full design of those gel systems. Gels with multicomponent become even more complicated because of the multiple interference effects coexist in the composite gel systems. AIM OF REVIEW: This review emphasizes systems view on the understanding of multicomponent low molecular weight gels (MLMWGs), and summarizes recent progress on the construction of desired networks of MLMWGs, including self-sorting and co-assembly, as well as the challenges and approaches to understanding MLMWGs, with the hope that the opportunities from natural products and peptides can speed up the understanding process and close the gaps between the design and prediction of structures. KEY SCIENTIFIC CONCEPTS OF REVIEW: This review is focused on three key concepts. Firstly, understanding the complicated multicomponent gels systems requires a systems perspective on MLMWGs. Secondly, several protocols can be applied to control self-sorting and co-assembly behaviors in those multicomponent gels system, including the certain complementary structures, chirality inducing and dynamic control. Thirdly, the discussion is anchored in challenges and strategies of understanding MLMWGs, and some examples are provided for the understanding of multicomponent gels constructed from small natural products and subtle designed short peptides.

13.
Nitric Oxide ; 147: 42-50, 2024 Jun 01.
Article in English | MEDLINE | ID: mdl-38631610

ABSTRACT

Nitric oxide (NO) donating drugs such as organic nitrates have been used to treat cardiovascular diseases for more than a century. These donors primarily produce NO systemically. It is however sometimes desirable to control the amount, location, and time of NO delivery. We present the design of a novel pH-sensitive NO release system that is achieved by the synthesis of dipeptide diphenylalanine (FF) and graphene oxide (GO) co-assembled hybrid nanosheets (termed as FF@GO) through weak molecular interactions. These hybrid nanosheets were characterised by using X-ray diffraction, Raman spectroscopy, Fourier transform infrared spectroscopy, zeta potential measurements, X-ray photoelectron spectroscopy, scanning and transmission electron microscopies. The weak molecular interactions, which include electrostatic, hydrogen bonding and π-π stacking, are pH sensitive due to the presence of carboxylic acid and amine functionalities on GO and the dipeptide building blocks. Herein, we demonstrate that this formulation can be loaded with NO gas with the dipeptide acting as an arresting agent to inhibit NO burst release at neutral pH; however, at acidic pH it is capable of releasing NO at the rate of up to 0.6 µM per minute, comparable to the amount of NO produced by healthy endothelium. In conclusion, the innovative conjugation of dipeptide with graphene can store and release NO gas under physiologically relevant concentrations in a pH-responsive manner. pH responsive NO-releasing organic-inorganic nanohybrids may prove useful for the treatment of cardiovascular diseases and other pathologies.


Subject(s)
Graphite , Nanostructures , Nitric Oxide , Graphite/chemistry , Hydrogen-Ion Concentration , Nitric Oxide/chemistry , Nitric Oxide/metabolism , Nanostructures/chemistry , Humans , Dipeptides/chemistry , Phenylalanine/chemistry , Phenylalanine/analogs & derivatives
14.
ACS Appl Bio Mater ; 7(4): 2309-2324, 2024 04 15.
Article in English | MEDLINE | ID: mdl-38478987

ABSTRACT

Peptide-based nanomaterials can serve as promising drug delivery agents, facilitating the release of active pharmaceutical ingredients while reducing the risk of adverse reactions. We previously demonstrated that Cyclo-Histidine-Histidine (Cyclo-HH), co-assembled with cancer drug Epirubicin, zinc, and nitrate ions, can constitute an attractive drug delivery system, combining drug self-encapsulation, enhanced fluorescence, and the ability to transport the drug into cells. Here, we investigated both computationally and experimentally whether Cyclo-HH could co-assemble, in the presence of zinc and nitrate ions, with other cancer drugs with different physicochemical properties. Our studies indicated that Methotrexate, in addition to Epirubicin and its epimer Doxorubicin, and to a lesser extent Mitomycin-C and 5-Fluorouracil, have the capacity to co-assemble with Cyclo-HH, zinc, and nitrate ions, while a significantly lower propensity was observed for Cisplatin. Epirubicin, Doxorubicin, and Methorexate showed improved drug encapsulation and drug release properties, compared to Mitomycin-C and 5-Fluorouracil. We demonstrated the biocompatibility of the co-assembled systems, as well as their ability to intracellularly release the drugs, particularly for Epirubicin, Doxorubicin, and Methorexate. Zinc and nitrate were shown to be important in the co-assembly, coordinating with drugs and/or Cyclo-HH, thereby enabling drug-peptide as well as drug-drug interactions in successfully formed nanocarriers. The insights could be used in the future design of advanced cancer therapeutic systems with improved properties.


Subject(s)
Antineoplastic Agents , Neoplasms , Epirubicin/therapeutic use , Histidine/chemistry , Mitomycin , Nitrates , Antineoplastic Agents/therapeutic use , Antineoplastic Agents/chemistry , Doxorubicin/therapeutic use , Doxorubicin/chemistry , Peptides/chemistry , Fluorouracil/therapeutic use , Zinc , Neoplasms/drug therapy
15.
J Colloid Interface Sci ; 665: 801-813, 2024 Jul.
Article in English | MEDLINE | ID: mdl-38555748

ABSTRACT

The co-assembly of polyelectrolytes (PE) with proteins offers a promising approach for designing complex structures with customizable morphologies, charge distribution, and stability for targeted cargo delivery. However, the complexity of protein structure limits our ability to predict the properties of the formed nanoparticles, and our goal is to identify the key triggers of the morphological transition in protein/PE complexes and evaluate their ability to encapsulate multivalent ionic drugs. A positively charged PE can assemble with a protein at pH above isoelectric point due to the electrostatic attraction and disassemble at pH below isoelectric point due to the repulsion. The additional hydrophilic block of the polymer should stabilize the particles in solution and enable them to encapsulate a negatively charged drug in the presence of PE excess. We demonstrated that diblock copolymers, poly(ethylene oxide)-block-poly(N,N-dimethylaminoethyl methacrylate) and poly(ethylene oxide)-block-poly(N,N,N-trimethylammonioethyl methacrylate), consisting of a polycation block and a neutral hydrophilic block, reversibly co-assemble with insulin in pH range between 5 and 8. Using small-angle neutron and X-ray scattering (SANS, SAXS), we showed that insulin arrangement within formed particles is controlled by intermolecular electrostatic forces between protein molecules, and can be tuned by varying ionic strength. For the first time, we observed by fluorescence that formed protein/PE complexes with excess of positive charges exhibited potential for encapsulating and controlled release of negatively charged bivalent drugs, protoporphyrin-IX and zinc(II) protoporphyrin-IX, enabling the development of nanocarriers for combination therapies with adjustable charge, stability, internal structure, and size.


Subject(s)
Insulin , Protoporphyrins , Polyelectrolytes , Ethylene Oxide , Scattering, Small Angle , X-Ray Diffraction , Polymers/chemistry , Proteins , Isoelectric Point
16.
Chemistry ; 30(20): e202303852, 2024 Apr 05.
Article in English | MEDLINE | ID: mdl-38299784

ABSTRACT

Recently, extensive works have focused on increasing the dissymmetry factors (glum) of various circularly polarized luminescence (CPL) materials, which is one of the most important factors for future applications of CPL. Herein, we designed a chiral co-assembled liquid crystal polymer (LCP) PTZ@R/S-PB2, which was prepared by chiral binary co-polymer (R/S-PB2) doped with achiral phenothiazine derivation dye (PTZ). For comparison, ternary co-polymerized LCP (R/S-PT) was synthesized by co-polymerizing with mesogenic monomer, chiral monomer and emissive monomer. Both PTZ@R/S-PB2 and R/S-PT showed aggregation-induced emission (AIE) properties. Interestingly, the CPL signals of both PTZ@R/S-PB2 and R/S-PT were reversed and amplified after thermal annealing treatment. The |glum| values of the co-assembled PTZ@R/S-PB2 were up to 0.13 at a 32 nm thickness, which was 5.4 times that of R/S-PT (|glum|=0.024). This is due to PTZ@R/S-PB2 could form more orderly chiral co-assembly structures. Noticeably, increasing the LCP film thickness could further improve the glum value, and the maximum glum of PTZ@R/S-PB2 could be enhanced to +0.91/-0.82 at a 220 nm thickness.

17.
J Colloid Interface Sci ; 663: 287-294, 2024 Jun.
Article in English | MEDLINE | ID: mdl-38402823

ABSTRACT

The co-assembly of different peptide chains usually leads to the formation of intricate architectures and sophisticated functions in biological systems. Although the co-assembly of stereoisomeric peptides represents a facile and flexible strategy for the synthesis of peptide-based nanomaterials with novel structures and potentially interesting properties, there is a lack of a general knowledge on how different isomers pack during assembly. Through the combined use of simulations and experimental observations, we report that heterochiral pairing is preferred to homochiral pairing at the molecular scale but self-sorting dictates beyond the molecular level for the mixtures of the short stereoisomeric ß-sheet peptides I3K (Ile-Ile-Ile-Lys). Furthermore, we demonstrate that flat ß-sheets and fibril morphology are always preferred to twisted ones during heterochiral pairing and subsequent assembly. However, the heterochiral pairing into flat morphology is not always at an equimolar ratio. Instead, a non-equimolar ratio (1:2) is observed for the mixing of homochiral LI3LK and heterochiral LI3DK, whose strand twisting degrees differ greatly. Such a study provides a paradigm for understanding the co-assembly of stereoisomeric peptides at the molecular scale and harnessing their blending for targeted nanostructures.


Subject(s)
Nanostructures , Peptides , Stereoisomerism , Peptides/chemistry , Nanostructures/chemistry , Protein Conformation, beta-Strand
18.
Mater Today Bio ; 25: 100961, 2024 Apr.
Article in English | MEDLINE | ID: mdl-38304341

ABSTRACT

The assembly of chiral peptides facilitates the formation of diverse supramolecular structures with unique physicochemical and biological properties. However, the effects of chirality on peptide assembly and resulting hydrogel properties remain underexplored. In this study, we systematically investigated the assembly propensity, morphology, and biostability of mixture of a pair of enantiomeric peptides LELCLALFLF (ECF-5) and DEDCDADFDF (ecf-5) at various ratios. Results indicate the development of ß-sheet fibrils, ultimately leading to the formation of self-supporting hybrid hydrogels. The hydrogel formed at a ratio of 1:1 exhibits a significantly lower storage modulus (G') than of the ratios of 0:1, 1:3, 3:1 and 1:0 (nD/nL; same below). Kink-separated fragments of approximately 100 nm in length predominate at ratios of 1:3 and 3:1, compared with the smooth fibrils at other ratios, probably attributed to an alternating arrangement of the co-assembled and self-assembled peptide fragments. The introduction of ecf-5 to the hybrid hydrogels improves resistance to proteolytic digestion and maintains commendable biocompatibility in both MIN6 and HUVECs cells. These findings provide valuable insights into the development of hydrogels with tailored properties, positing them potential scaffolds for 3D cell culture and tissue engineering.

19.
Colloids Surf B Biointerfaces ; 234: 113724, 2024 Feb.
Article in English | MEDLINE | ID: mdl-38183870

ABSTRACT

Both ursolic acid (UA) and sorafenib (Sora) have been generally utilized in cancer treatment, and the combination of the two has also shown a good anti-tumor effect. However, single-agent therapy for Hepatocellular carcinoma (HCC) has the disadvantages of multi-drug resistance, poor water solubility and low bioavailability, and the application of traditional nanocarrier materials is limited due to their low drug loading and low carrier-related toxicity. Therefore, we prepared US NPs with different proportions of UA and Sora by solvent exchange method for achieving synergistic HCC therapy. US NPs had suitable particle size, good dispersibility and storage stability, which synergistically inhibited the proliferation of HepG2 cells, SMMC7721 cells and H22 cells. In addition, we also proved that US NPs were able to suppress the migration of HepG2 cells and SMMC7721 cells and reduce the adhesion ability and colony formation ability of these cells. According to the results, US NPs could degrade the membrane potential of mitochondrial, participate in cell apoptosis, and synergistically induce autophagy. Collectively, the carrier-free US NPs provide new strategies for HCC treatment and new ideas for the development of novel nano-drug delivery systems containing UA and Sora.


Subject(s)
Antineoplastic Agents , Carcinoma, Hepatocellular , Liver Neoplasms , Nanoparticles , Humans , Sorafenib/pharmacology , Sorafenib/therapeutic use , Carcinoma, Hepatocellular/pathology , Ursolic Acid , Pharmaceutical Preparations , Liver Neoplasms/pathology , Cell Line, Tumor
20.
Bioact Mater ; 34: 181-203, 2024 Apr.
Article in English | MEDLINE | ID: mdl-38235308

ABSTRACT

Supramolecular peptide nanofiber hydrogels are emerging biomaterials for tissue engineering, but it is difficult to fabricate multi-functional systems by simply mixing several short-motif-modified supramolecular peptides because relatively abundant motifs generally hinder nanofiber cross-linking or the formation of long nanofiber. Coupling bioactive factors to the assembling backbone is an ideal strategy to design multi-functional supramolecular peptides in spite of challenging synthesis and purification. Herein, a multi-functional supramolecular peptide, P1R16, is developed by coupling a bioactive factor, parathyroid hormone related peptide 1 (PTHrP-1), to the basic supramolecular peptide RADA16-Ⅰ via solid-phase synthesis. It is found that P1R16 self-assembles into long nanofibers and co-assembles with RADA16-Ⅰ to form nanofiber hydrogels, thus coupling PTHrP-1 to hydrogel matrix. P1R16 nanofiber retains osteoinductive activity in a dose-dependent manner, and P1R16/RADA16-Ⅰ nanofiber hydrogels promote osteogenesis, angiogenesis and osteoclastogenesis in vitro and induce multi-functionalized osteoregeneration by intramembranous ossification and bone remodeling in vivo when loaded to collagen (Col) scaffolds. Abundant red blood marrow formation, ideal osteointegration and adapted degradation are observed in the 50% P1R16/Col scaffold group. Therefore, this study provides a promising strategy to develop multi-functional supramolecular peptides and a new method to topically administrate parathyroid hormone or parathyroid hormone related peptides for non-healing bone defects.

SELECTION OF CITATIONS
SEARCH DETAIL