Electrochemical Detection of Nucleic Acids Using Three-Dimensional Graphene Screen-Printed Electrodes.

Electrochemical approaches, along with miniaturization of electrodes, are increasingly being employed to detect and quantify nucleic acid biomarkers. Miniaturization of the electrodes is achieved through the use of screen-printed electrodes (SPEs), which consist of one to a few dozen sets of electrodes, or by utilizing printed circuit boards. Electrode materials used in SPEs include glassy carbon (Chiang H-C, Wang Y, Zhang Q, Levon K, Biosensors (Basel) 9:2-11, 2019), platinum, carbon, and graphene (Cheng FF, He TT, Miao HT, Shi JJ, Jiang LP, Zhu JJ, ACS Appl Mater Interfaces 7:2979-2985, 2015). There are numerous modifications to the electrode surfaces as well (Cheng FF, He TT, Miao HT, Shi JJ, Jiang LP, Zhu JJ, ACS Appl Mater Interfaces 7:2979-2985, 2015). These approaches offer distinct advantages, primarily due to their demonstrated superior limit of detection without amplification. Using the SPEs and potentiostats, we can detect cells, proteins, DNA, and RNA concentrations in the nanomolar (nM) to attomolar (aM) range. The focus of this chapter is to describe the basic approach adopted for the use of SPEs for nucleic acid measurement.

Design of a long-lived Mo2C-MoO2@GC-N electrocatalyst by the ambient DC arc plasma for the hydrogen evolution reaction.

A crucial challenge in hydrogen production through electrolysis is developing inexpensive, earth-abundant, and highly efficient Pt-free electrocatalysts for the hydrogen evolution reaction (HER). Molybdenum carbide is ideal for this application because of its special electrical structure, low cost, and advantageous characteristics. Herein, the long-lived electrocatalysts for HER have been synthesized via the direct current (DC) arc discharge plasma method under ambient air conditions, and the relationship between the properties of materials and catalytic characteristics has been established. The samples differed in the ratio of molybdenum, graphite, and melamine. The sample with the highest proportion of melamine in the initial mixture has Mo2C-MoO2 heterointerfaces, which demonstrates the highest and most stable electrocatalytic activity with the overpotential of 148 mV at 10 mA·cm-2 and Tafel slope of 63 mV·dec-1 in alkaline electrolyte. Meanwhile, the electrodes demonstrated long-lived electrochemical durability for two weeks and investigated the features of forming a stable system for HER.

Advancement in SARS-CoV-2 diagnosis: A new and stable electrochemical biosensor for genomic RNA detection.

Coronavirus disease (COVID-19) is caused by infection with the SARS-CoV-2 virus, having already caused more than seven million deaths worldwide. Conventional techniques for SARS-CoV-2 detection have limitations, as high cost, low specificity, and longer analysis time, among others. Biosensors emerge as a necessary alternative to overcome the difficulties of current diagnostics. This paper reports a sensor platform where silver-doped zinc oxide nanomaterial (Ag:ZnONp) was used onto carbon screen-printed electrode and ethidium bromide as indicator for development of a specific electrochemical genosensor for COVID-19. This genosensor demonstrated good linearity between the concentrations of 5.62 × 104-5.62 copies/mL and a detection limit of 5 copies/mL with gRNA in patient's samples, with a response time within 30 min. Molecular modeling and morphological analysis are in agreement with obtained electrochemical results. Additional techniques such as AFM, SEM, and EIS were conducted to characterize the morphological and electrochemical properties of the biosensor's surface. The biosensor was also capable of detecting the target presence in spiked samples and demonstrated a stability of 60 days, higher than other similar biosensors for SARS-CoV-2.

New screen-printed electrodes for Raman spectroelectrochemistry. Determination of p-aminosalicylic acid.

BACKGROUND: The availability of new surface enhanced Raman scattering (SERS) substrates is essential to develop quantitative analytical methods. Electrochemistry is an easy, fast and reproducible methodology to prepare SERS substrates on screen-printed electrodes (SPEs). RESULTS: This work proposes new SPEs based on a three-electrode system all made of silver. Using the same ink for the whole electrode system facilitates the fabrication process, reduces production costs, and leads to excellent analytical performance. The results showed that Raman enhancement depends strongly on the type of silver ink. To demonstrate the capabilities of the new electrodes developed, 4-aminosalicylic acid was determined in complex matrices and in the presence of strong interfering compounds such as salicylic acid and acetylsalicylic acid. The proposed analytical method is based on the electrochemical surface oxidation enhanced Raman scattering (EC-SOERS) strategy. AgCl nanocrystals are generated on the working electrode surface, which amplify the Raman signal of 4-aminosalicylic acid. Good figures of merit were obtained both in the absence and in the presence of the interfering compounds, achieving a correct estimation of a 4-aminosalicylic test sample in complex matrices. SIGNIFICANCE: The new SPEs have been demonstrated to be very sensitive and reproducible which, together to the high specificity of the Raman signal, makes this methodology very attractive for chemical analysis.

An electrochemical series for materials.

The electrochemical series is a useful tool in electrochemistry, but its effectiveness in materials chemistry is limited by the fact that the standard electrochemical series is based on a relatively small set of reactions, many of which are measured in aqueous solutions. To address this problem, we have used machine learning to create an electrochemical series for inorganic materials from tens of thousands of entries in the Inorganic Crystal Structure Database. We demonstrate that this series is generally more consistent with oxidation states in solid-state materials than the series based on aqueous ions. The electrochemical series was constructed by developing and parameterizing a physical, human-interpretable model of oxidation states in materials. We show that this model enables the prediction of oxidation states from composition in a way that is more accurate than a state-of-the-art transformer-based neural network model. We present applications of our approach to structure prediction, materials discovery, and materials electrochemistry, and we discuss possible additional applications and areas for improvement. To facilitate the use of our approach, we introduce a freely available website and API.

Bipolar electrochemical growth of conductive microwires for cancer spheroid integration: a step forward in conductive biological circuitry.

The field of bioelectronics is developing exponentially. There is now a drive to interface electronics with biology for the development of new technologies to improve our understanding of electrical forces in biology. This builds on our recently published work in which we show wireless electrochemistry could be used to grow bioelectronic functional circuitry in 2D cell layers. To date our ability to merge electronics with in situ with biology is 3D limited. In this study, we aimed to further develop the wireless electrochemical approach for the self-assembly of microwires in situ with custom-designed and fabricated 3D cancer spheroids. Unlike traditional electrochemical methods that rely on direct electrical connections to induce currents, our technique utilises bipolar electrodes that operate independently of physical wired connections. These electrodes enable redox reactions through the application of an external electric field. Specifically, feeder electrodes connected to a power supply generate an electric field, while the bipolar electrodes, not physically connected to the feeder electrodes, facilitate the reduction of silver ions from the solution. This process occurs upon applying a voltage across the feeder electrodes, resulting in the formation of self-assembled microwires between the cancer spheroids.Thereby, creating interlinked bioelectronic circuitry with cancer spheroids. We demonstrate that a direct current was needed to stimulate the growth of conductive microwires in the presence of cell spheroids. Microwire growth was successful when using 50 V (0.5 kV/cm) of DC applied to a single spheroid of approximately 800 µm in diameter but could not be achieved with alternating currents. This represents the first proof of the concept of using wireless electrochemistry to grow conductive structures with 3D mammalian cell spheroids.

Investigating perimidine precursors for the synthesis of new multiredox polymers.

We present a new simple approach for electrochemical synthesis of semi-condensed ambipolar perinone polymers with phthaloperine (p1) or phenanthroline (p2) skeleton from available and cheap perimidine precursors. Polymerization of perimidine derivatives varies in efficiency depending on the monomer, but overall is highly efficient, especially when electropolymerization is used. Electrooxidation is well controllable and provides a certain characteristic share of new bonds in the structure of perimidine polymers: semi-ladder bis-perimidine unit, ladder bis-perimidine unit, and protonated bis-perimidine unit. Polymer p2 obtained with higher efficiency was put through broader analysis (UV-Vis, IR, ESR and quantum-chemical calculations). As indicated, donor-acceptor structure and specific intermolecular interactions of p2 assure its electrical conductivity and complex redox activity. Although protonated bonds break π-conjugation in the structure of the macromolecule, there is also a diradical state that favors intermolecular interactions and intermolecular π-conjugation channels within bis-perimidine segments. It has been proven that there is a diradical state which appears as an intermediate state between the oxidized and reduced states of the protonated polymer unit. This work positions perimidine polymers as a versatile ambipolar multiredox p- and n-type conductor, indicating a potential for expanding perinone-based perylene-diperimidine polymers for innovative electronics and (bio)sensors.

Designing an Electrochemical Biosensor Based on Voltammetry for Measurement of Human Chorionic Gonadotropin.

Background: Human chorionic gonadotropin (hCG) is a polypeptide hormone synthesized during pregnancy and is also upregulated in some pathologic conditions such as certain tumors. Its measurement is essential for diagnosing pregnancy and malignancies. Despite numerous attempts to introduce an accurate method capable of detecting hCG levels, several limitations are found in previous techniques. This study aimed to address the limitations of current hCG assay methods by designing an electrochemical biosensor based on voltammetry for the rapid, selective, inexpensive, and sensitive measurement of hCG levels. Methods: A carbon paste electrode was prepared and functionalized by para-aminobenzoic acid. The primary anti-ß-hCG monoclonal antibody was immobilized on the electrode surface by activating the carboxyl groups with 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide solutions. The study also involved optimizing parameters such as the time for primary antibody fixation, the time for hCG attachment, and the pH of the hydrogen peroxide solution to maximize the biosensor response. Different concentrations of hCG hormone were prepared and loaded on the electrode surface, the secondary antibody labeled with HRP enzyme was applied, thionine in phosphate-buffered saline solution was placed on the electrode surface, and the differential pulse electrical signal was recorded. Results: The linear range ranged from 5 to 100 mIU/ml, and the limit of detection was calculated as 0.11 mIU. The relative standard deviation was 3% and 2% for five repeated measurements of commercial standard samples with concentrations of 2 and 20 mIU/mL, respectively. The percent recovery was obtained from 98.3% to 101.5%. Conclusion: The sensor represents a promising advancement in hCG level measurement, offering a potential solution to overcome the existing limitations in current diagnostic strategies. Simple and inexpensive design, detecting hCG in its important clinical range during early pregnancy, and successful measurement of hCG in real serum samples are the advantages of this sensor.

1,4-Benzodioxane substituted aza-BODIPY: towards photostable yet efficient triplet photosensitizer.

We report herein the synthesis of aza-BODIPY substituted with 1,4-benzodioxane-6-yl substituents at 3,5 positions of the chromophore system. Both pyrrole rings of the aza-BODIPY in question were substituted with bromine atoms in order to induce highly desirable photophysical properties, such as highly populated excited triplet state (T1) and long excited triplet-state lifetime (τT) of 21 µs. The photosensitized oxygenation of a model compounds, viz. DPBF, points to a high singlet oxygen and/or other ROS formation quantum yield of 0.42. The photosensitizer studied exhibited an absorption band within the so-called "therapeutic window", with λabs 678 nm. As estimated by CV/DPV measurements the 1,4-benzodioxane-6-yl substituted aza-BODIPYs studied exhibited a multi-electron oxidations at a relatively low potentials (Eox), pointing to the very good electron-donating properties of these molecules. High photostability and thermal stability was observed for all compounds studied. The good singlet oxygen quantum yield measured combined with an exceptional photostability makes this aza-BODIPY a promising candidate for applications such as photocatalysis and photodynamic therapy (PDT).

Design of an Electrochemical Cell for Continuous Wave EPR Measurements of Radical Ions.

The combination of continuous wave electron paramagnetic resonance (cw-EPR) with electrochemistry is highly attractive as it allows a clean in-situ generation and the subsequent spectroscopic characterisation of radical ions, which are important intermediates in many photocatalytic cycles as well as light-induced processes occurring in biological systems or optoelectronic devices. Although commercial setups for spectroelectrochemical EPR are available, they are often expensive and tailored to a particular spectroscopic setup.  Here we present a design for a low-cost electrochemical EPR cell that can be used in combination with any commercial cw-EPR instrumentation. The cell design is compared to existing setups and the performance of the cell is evaluated by comparison of EPR spectra obtained by chemical and electrochemical oxidation of a graphene fragment.

Short-term impact of vitamin K2 supplementation on biochemical parameters and lipoprotein fractions.

This study explored the short-term effects of vitamin K2 (VK2) supplementation on biochemical parameters (vitamin D, vitamin E, vitamin A, alkaline phosphatase, calcium, phosphorus (P), magnesium, metallothionein, triglycerides, cholesterol, high-density lipoprotein (HDL), low-density lipoprotein (LDL), and lipoprotein fractions (albumin, HDL, very low-density lipoprotein (VLDL), LDL, and chylomicrons). A short-term experiment (24 h, six probands) was performed to track changes in VK2 levels after a single-dose intake (360 µg/day). Liquid chromatography-tandem mass spectrometry was used to monitor vitamin K levels (menaquinone-4 (MK-4), menaquinone-7 (MK-7), and vitamin K1 [VK1]) with a limit of detection of 1.9 pg/mL for VK1 and 3.8 pg/mL for the two forms of VK2. Results showed that MK-7 levels significantly increased within 2-6 h post-administration and then gradually declined. MK-4 levels were initially low, showing a slight increase, whereas VK1 levels rose initially and then decreased. Biochemical analyses indicated no significant changes in sodium, chloride, potassium, calcium, magnesium, albumin, or total protein levels. A transient increase in P was observed, peaking at 12 h before returning to baseline. Agarose gel electrophoresis of lipoprotein fractions revealed distinct chylomicron bands and variations in VLDL and HDL mobility, influenced by dietary lipids and VK2 supplementation. These findings suggest effective absorption and metabolism of MK-7 with potential implications for bone metabolism and cardiovascular health.

Reaction Mechanisms of High-Rate Copper Electrochemical Machining in Nitrate Electrolytes.

The high-rate electrochemical dissolution of copper in nitrate electrolytes is investigated primarily via polarization curves, while varying parameters such as the electrolyte flow velocity, the electrolyte resistance, the anode geometry, and the temperature. This study focuses on the re-rise in current at high voltages after the limiting current plateau. As a result of the studies, a change in the complexation mechanism from hydration to "solvo-nitration" is proposed, which requires an additional potential drop within the electrochemical double layer.

Triphenylphosphine Oxide: A Versatile Covalent Functionality for Carbon Nanotubes.

Broadening the scope of functionalities that can be covalently bound to single-walled carbon nanotubes (SWCNTs) is crucial for enhancing the versatility of this promising nanomaterial class in applied settings. Here we report the covalent linkage of triphenylphosphine oxide [Ph3P(O)] to SWCNTs, a hitherto overlooked surface functionality. We detail the synthesis and structural characterization of a new family of phosphine oxide-functionalized diaryliodonium salts that can facilitate direct Ph3P(O) transfer and afford novel SWCNTs with tunable Ph3P(O) content (SWCNT-P). The molecularly-distributed and robust nature of the covalent Ph3P(O) attachment in SWCNT-P was supported by a combination of characterization methods including Raman, infrared, UV-Vis-NIR and X-ray photoelectron spectroscopies coupled with thermogravimetric analysis. Electron microscopy further revealed the effectiveness of the Ph3P(O) moiety for de-bundling SWCNTs to yield SWCNT-P with superior dispersibility and processability. Finally, electrochemical studies established that SWCNT-P is sensitive to the presence of Li+, Na+ and K+ wherein the Gutmann-Beckett Lewis acidity parameters of the ions were quantitatively transduced by Ph3P(O) to electrochemical responses. This work hence presents a synthetic, structural, spectroscopic and electrochemical foundation for a new phosphorus-enriched responsive nanomaterial platform featuring the Ph3P(O) functionality.

Interfacial Science for Electrosynthesis.

Interfacial science and electroorganic syntheses are inextricably linked because all electrochemical reactions occur at the interface between the electrode and the solution. Thus, the surface chemistry of the electrode material impacts the organic reaction selectivity. In this short review, we highlight emergent examples of electrode surface chemistries that enable selective electroorganic synthesis in three reaction classes: (1) hydrogenation, (2) oxidation, and (3) reductive C‒C bond formation between two electrophiles. We showcase the breadth of techniques, including materials and in-situ characterization, requisite to establish mechanistic schemes consistent with the observed reactivity patterns. Leveraging an electrode's unique surface chemistry will provide complementary approaches to tune the selectivity of electroorganic syntheses and unlock an electrode's catalytic properties.

Strategies for overcoming challenges in selective electrochemical CO2 conversion to ethanol.

The electrochemical conversion of carbon dioxide (CO2) to valuable chemicals is gaining significant attention as a pragmatic solution for achieving carbon neutrality and storing renewable energy in a usable form. Recent research increasingly focuses on designing electrocatalysts that specifically convert CO2 into ethanol, a desirable product due to its high-energy density, ease of storage, and portability. However, achieving high-efficiency ethanol production remains a challenge compared to ethylene (a competing product with a similar electron configuration). Existing electrocatalytic systems often suffer from limitations such as low energy efficiency, poor stability, and inadequate selectivity toward ethanol. Inspired by recent progress in the field, this review explores fundamental principles and material advancements in CO2 electroreduction, emphasizing strategies for ethanol production over ethylene. We discuss electrocatalyst design, reaction mechanisms, challenges, and future research directions. These advancements aim to bridge the gap between current research and industrialized applications of this technology.

Pulsed electrolysis for CO2 reduction: Techno-economic perspectives.

Pulsed electrolysis has emerged as a promising approach to CO2 reduction, offering a simple method to adjust product selectivity and enhance operational stability. However, conceptually applying the dynamic pulse operation process on a large scale highlights its differences when compared to conventional electrolysis processes, impacting the economic feasibility of the process. We discuss the influence of pulsed electrolysis on surface reaction mechanisms and the simulation of changes at both the continuum and smaller scales through computational modeling. Additionally, we point out considerations for applying pulsed CO2 electrolysis to a large-scale process and assess their economic implications, comparing pulsed electrolysis with constant electrolysis.

A dual-mode electrochemical biosensor based on GO-Fe3O4 doped PEDOT nanocomposite for the ultrasensitive assay of microRNA.

MicroRNA, as a distinctive biomarker, plays a crucial role in the early prognosis and diagnosis of numerous severe diseases. However, due to its inherent properties such as low abundance, small size, and high sequence similarity, the sensitive and accurate detection of microRNA remains a major challenge. Herein, a dual-mode electrochemical biosensing platform was developed for microRNA detection, based on poly(3,4-ethylenedioxythiophene) (PEDOT) doped with graphene oxide-Fe3O4 (GO-Fe3O4) nanocomposite. The GO-Fe3O4/PEDOT composite demonstrated a porous microstructure, outstanding conductivity, and robust catalytic activity towards nitrite. It was electrodeposited onto the electrode surface in a one-step process using the cyclic voltammetry method (CV). The microRNA biosensor was obtained by anchoring DNA with amino groups to the GO-Fe3O4/PEDOT layer through the formation of amide bonds. The designed dual-mode microRNA biosensor demonstrated a broad linear range spanning from 10-15 M to 10-6 M, with low detection limits of 5.18 × 10-15 M and 7.36 × 10-15 M when using chronocoulometry (CC) and amperometric i-t curve (i-t) modes, respectively. Furthermore, a dual-mode electrochemical biosensor has been successfully developed and utilized for the detection of microRNA in human serum, demonstrating its potential for precise and sensitive microRNA detection and its practical application value in clinical medicine.

Enantioselective Discrimination via Wireless Chemiresistive Devices.

Developing chemiresistive devices for the wireless detection of complex analytes has gained considerable interest. In particular, the enantioselective recognition of chiral molecules is still a challenge. Here, we design a hybrid chemiresistive device for the wireless enantioselective discrimination of chiral analytes by combining the enantiorecognition capabilities of an inherently chiral oligomer, that is, oligo-(3,3'-dibenzothiophene) (BT2T4) and the insulating/conducting transition of polypyrrole (Ppy). The device is obtained by modifying each extremity of an interdigitated electrode (IDE) with Ppy on the interdigitated area and oligo-BT2T4 on the connection pads. Due to the asymmetric electroactivity triggered by bipolar electrochemistry, the wireless enantioselective discrimination of both enantiomers of tryptophan and DOPA was achieved. A difference in the onset resistance values was obtained for both enantiomers due to a favorable or unfavorable diastereomeric interaction between the inherently chiral oligomer and the antipode of the chiral molecule. Interestingly, such a device showed a wide quantification range, from µM to mM levels. This work opens up new alternatives to designing advanced wireless devices in enantiorecognition.

Tracking Minority Species in Redox Reactions: A Quantitative Combined XAS and Modulation Excitation Study.

Understanding nature of intermediates/active species in reactions is a major challenge in chemistry. This is because spectator species typically dominate the experimentally derived data and consequently active phase contributions are masked. Transient methods offer a means to bypass this difficulty. In particular, modulation excitation with phase-sensitive detection (ME-PSD) provides a mechanism to distinguish between spectator and reacting species. Herein, modulation excitation (ME) time-resolved (energy dispersive) X-ray absorption spectroscopy, assisted by phase sensitive detection (PSD) analysis, has been applied to the study of a liquid phase process; in this case the classic ferrocyanide/ferricyanide redox couple. Periodic switches of the electrical potential (anodic/cathodic) enabled the use of the ME approach. Structural changes at fractions as low as 2% of the total number of electroactive species were detected within the X-ray beam probe volume containing ~30 pmol of Fe(II)/Fe(III).

Carbon Thin-Film Electrodes as High-Performing Substrates for Correlative Single Entity Electrochemistry.

Correlative methods to characterize single entities by electrochemistry and microscopy/spectroscopy are increasingly needed to elucidate structure-function relationships of nanomaterials. However, the technical constraints often differ depending on the characterization techniques to be applied in combination. One of the cornerstones of correlative single-entity electrochemistry (SEE) is the substrate, which needs to achieve a high conductivity, low roughness, and electrochemical inertness. This work shows that graphitized sputtered carbon thin films constitute excellent electrodes for SEE while enabling characterization with scanning probe, optical, electron, and X-ray microscopies. Three different correlative SEE experiments using nanoparticles, nanocubes, and 2D Ti3C2Tx MXene materials are reported to illustrate the potential of using carbon thin film substrates for SEE characterization. The advantages and unique capabilities of SEE correlative strategies are further demonstrated by showing that electrochemically oxidized Ti3C2Tx MXene display changes in chemical bonding and electrolyte ion distribution.