Anchored Weakly-Solvated Electrolytes for High-Voltage and Low-Temperature Lithium-ion Batteries.

Electrolytes endowed with high oxidation/reduction interfacial stability, fast Li-ion desolvation process and decent ionic conductivity over wide temperature region are known critical for low temperature and fast-charging performance of energy-dense batteries, yet these characteristics are rarely satisfied simultaneously. Here, we report anchored weakly-solvated electrolytes (AWSEs), that are designed by extending the chain length of polyoxymethylene ether electrolyte solvent, can achieve the above merits at moderate salt concentrations. The -O-CH2-O- segment in solvent enables the weak four-membered ring Li+ coordination structure and the increased number of segments can anchor the solvent by Li+ without largely sacrificing the ionic dissociation ability. Therefore, the single salt/single solvent AWSEs enable solvent co-intercalation-free behavior towards graphite (Gr) anode and high oxidation stability towards high-nickel cathode (LiNi0.8Co0.1Mn0.1O2-NCM811), as well as the formation of inorganic rich electrode/electrolyte interphase on both of them due to the anion-rich solvation shells. The capacity retention of Gr||NCM811 Ah-class pouch cell can reach 70.85% for 1000 cycles at room-temperature and 75.86% for 400 cycles at -20 °C. This work points out a promising path toward the molecular design of electrolyte solvents for high-energy/power battery systems that are adaptive for extreme conditions.

Restructuring Electrolyte Solvation by a Partially and Weakly Solvating Cosolvent toward High-Performance Potassium-Ion Batteries.

Ether-based electrolytes are among the most important electrolytes for potassium-ion batteries (PIBs) due to their low polarization voltage and notable compatibility with potassium metal. However, their development is hindered by the strong binding between K+ and ether solvents, leading to [K+-solvent] cointercalation on graphite anodes. Herein, we propose a partially and weakly solvating electrolyte (PWSE) wherein the local solvation environment of the conventional 1,2-dimethoxyethane (DME)-based electrolyte is efficiently reconfigured by a partially and weakly solvating diethoxy methane (DEM) cosolvent. For the PWSE in particular, DEM partially participates in the solvation shell and weakens the chelation between K+ and DME, facilitating desolvation and suppressing cointercalation behavior. Notably, the solvation structure of the DME-based electrolyte is transformed into a more cation-anion-cluster-dominated structure, consequently promoting thin and stable solid-electrolyte interphase (SEI) generation. Benefiting from optimized solvation and SEI generation, the PWSE enables a graphite electrode with reversible K+ (de)intercalation (for over 1000 cycles) and K with reversible plating/stripping (the K||Cu cell with an average Coulombic efficiency of 98.72% over 400 cycles) and dendrite-free properties (the K||K cell operates over 1800 h). We demonstrate that rational PWSE design provides an approach to tailoring electrolytes toward stable PIBs.

In Situ Chemical Modulation of Graphitization Degree of Carbon Fibers and Its Potassium Storage Mechanism.

Graphite is considered to be the most auspicious anode candidate for potassium ion batteries. However, the inferior rate performances and cycling stability restrict its practical applications. Few studies have investigated the modulating the graphitization degree of graphitic materials. Herein, a nitrogen-doped carbon-coated carbon fiber composite with tunable graphitization (CNF@NC) through etching growth, in-situ oxidative polymerization, and subsequent carbonization process is reported. The prepared CNF@NC with abundant electrochemical active sites and a rapid K+/electron transfer pathway, can effectively shorten the K+ transfer distance and promote the rapid insertion/removal of K+. Amorphous domains and short-range curved graphite layers can provide ample mitigation spaces for K+ storage, alleviating the volume expansion of the highly graphitized CNF during repeated K+ insertion/de-intercalation. As expected, the CNF@NC-5 electrode presents a high initial coulombic efficiency (ICE) of 69.3%, an unprecedented reversible volumetric capacity of 510.2 mA h cm-3 at 0.1 A g-1 after 100 cycles with the mass-capacity of 294.9 mA h g-1. The K+ storage mechanism and reaction kinetic analysis are studied by combining in-situ analysis and first-principles calculation. It manifests that the K+ storage mechanism in CNF@NC-5 is an adsorption-insertion-insertion mechanism (i.e., the "1+2" model). The solid electrolyte interphase (SEI) film forming is also detected.

Deciphering Anion-Modulated Solvation Structure for Calcium Intercalation into Graphite for Ca-Ion Batteries.

Co-intercalation reactions make graphite a feasible anode in Ca ion batteries, yet the correlation between Ca ion intercalation behaviors and electrolyte structure remains unclear. This study, for the first time, elucidates the pivotal role of anions in modulating the Ca ion solvation structures and their subsequent intercalation into graphite. Specifically, the electrostatic interactions between Ca ion and anions govern the configurations of solvated-Ca-ion in dimethylacetamide-based electrolytes and graphite intercalation compounds. Among the anions considered (BH4 -, ClO4 -, TFSI- and [B(hfip)4]-), the coordination of four solvent molecules per Ca ion (CN=4) leads to the highest reversible capacities and the fastest reaction kinetics in graphite. Our study illuminates the origins of the distinct Ca ion intercalation behaviors across various anion-modulated electrolytes, employing a blend of experimental and theoretical approaches. Importantly, the practical viability of graphite anodes in Ca-ion full cells is confirmed, showing significant promise for advanced energy storage systems.

Understanding the Coupling Mechanism of Intercalation and Conversion Hybrid Storage in Lithium-Graphite Anode.

Anodes with high capacity and long lifespan play an important role in the advanced batteries. However, none of the existing anodes can meet these two requirements simultaneously. Lithium (Li)-graphite composite anode presents great potential in balancing these two requirements. Herein, the working mechanism of Li-graphite composite anode is comprehensively investigated. The capacity decay features of the composite anode are different from those of Li ion intercalation in Li ion batteries and Li metal deposition in Li metal batteries. An intercalation and conversion hybrid storage mechanism are proposed by analyzing the capacity decay ratios in the composite anode with different initial specific capacities. The capacity decay models can be divided into four stages including Capacity Retention Stage, Relatively Independent Operation Stage, Intercalation & Conversion Coupling Stage, Pure Li Intercalation Stage. When the specific capacity is between 340 and 450 mAh g-1, its capacity decay ratio is between that of pure intercalation and conversion model. These results intensify the comprehensive understandings on the working principles in Li-graphite composite anode and present novel insights in the design of high-capacity and long-lifespan anode materials for the next-generation batteries.

A Fully Methylated Cyclic Ether Solvent Enables Graphite Anode Cycling at Low Temperatures.

Graphite anode suffers from great capacity loss and larger cell polarization under low-temperature conditions in lithium-ion batteries (LIBs), which are mainly caused by the high energy barrier for the Li+ desolvation process and sluggish Li+ transfer rate across the solid electrolyte interface (SEI). Regulating an electrolyte with an anion-dominated solvation structure could synchronously stabilize the interface and boost the reaction kinetics of the graphite anode. Herein, a highly ionic conductive electrolyte consisting of a fully methylated cyclic ether solvent of 2,2,4,4,5,5-hexamethyl-1,3-dioxolane (HMD) and fluoroethylene carbonate (FEC) cosolvent was designed. The high electron-donating effect and steric hindrance of -(CH3)2 in HMD endow the HMD-based electrolyte with high ionic conductivity but lower coordination numbers with Li+, and an anion-dominated solvation structure was formed. Such configuration can accelerate the desolvation process and induce the forming of a LiF-rich SEI film on the anode, avoiding the solvent coembedding into graphite and enhancing the ion migration rate under low temperatures. The assembled Li||graphite cell with the tame electrolyte outperformed the conventional carbonates-based cell, showing 93.8% capacity retention after 227 cycles for the DF-based cell compared to 64.7% after 150 cycles. It also exhibited a prolonged cycle life for 200 rounds with 81% capacity retention under -20 °C. Therefore, this work offers a valuable thought for solvent design and provides approaches to electrolyte design for low-temperature LIBs.

Glycerol Electrolyzer with Graphite Anode and Cathode Produces Carbonyl Compounds and Hydrogen: Background Electrocatalysis of a "Nonparticipating" Current Collector.

This study unveils a novel role of bare graphite as a catalyst in glycerol electrooxidation and hydrogen evolution reactions, challenging the prevailing notion that current collectors employed in electrolyzers are inert. Half-cell experiments elucidate the feasibility of glycerol oxidation and hydrogen production on bulk graphite electrodes at potentials exceeding 1.7 V. The investigation of varying glycerol concentrations (0.05 to 1.5 mol L-1) highlights a concentration-dependent competition between glycerol electrooxidation and oxygen evolution reactions. Employing an H-type glycerol electrolyzer, polarization curves reveal significant activation polarization attributed to the low electroactivity of the anode. Glycerol electrolysis at different concentrations yields diverse product mixtures, including formate, glycolate, glycerate, and lactate at the anode, with concurrent hydrogen generation at the cathode. The anolyte composition changes with glycerol concentration, resulting in less-oxidized compounds at higher concentrations and more oxidized compounds at lower concentrations. The cell voltage also influences the product formation selectivity, with an increased voltage favoring more oxidized compounds. The glycerol concentration also affects hydrogen production, with lower concentrations yielding higher hydrogen amounts, peaking at 3.5 V for 0.05 mol L-1. This model quantitatively illustrates graphite's contribution to current and product generation in glycerol electrolyzers, emphasizing the significance of background current and products originating from current collectors if in contact with the reactants. These results have an impact on the efficiency of the electrolyzer and raise questions regarding possible extra non-noble "nonparticipating" current collectors that could affect overall performance. This research expands our understanding of electrocatalysis on graphite surfaces with potential applications in optimizing electrolyzer configurations for enhanced efficiency and product selectivity.

Li5.5PS4.5Cl1.5-Based All-Solid-State Battery with a Silver Nanoparticle-Modified Graphite Anode for Improved Resistance to Overcharging and Increased Energy Density.

All-solid-state lithium batteries (ASSLBs) are attracting tremendous attention due to their improved safety and higher energy density. However, the use of a metallic lithium anode poses a major challenge due to its low stability and processability. Instead, the graphite anode exhibits high reversibility for the insertion/deinsertion of lithium ions, giving ASSLBs excellent cyclic stability but a lower energy density. To increase the energy density of ASSLBs with the graphite anode, it is necessary to lower the negative/positive (N/P) capacity ratio and to increase the charging voltage. These strategies bring new challenges to lithium metal plating and dendrite growth. Here, a nano-Ag-modified graphite composite electrode (Ag@Gr) is developed to overcome these shortcomings for Li5.5PS4.5Cl1.5-based ASSLBs. The Ag@Gr composite exhibits a strong ability to inhibit lithium metal plating and fast lithium-ion transport kinetics. Ag nanoparticles can accommodate excess Li, and the as-obtained Li-Ag alloy enhances the kinetics of the composite electrode. The ASSLB with the Li(Ni0.8Co0.1Mn0.1)O2 cathode and Ag@Gr anode achieves an energy density of 349 W h kg-1. The full cell using Ag@Gr with an N/P ratio of 0.6 also highlights the rate performance. This work provides a simple and effective method to regulate the charge transport kinetics of graphite anodes and improve the cyclic performance and energy density of ASSLBs.

Chloro-Functionalized Ether-Based Electrolyte for High-Voltage and Stable Potassium-Ion Batteries.

Ether-based electrolyte is beneficial to obtaining good low-temperature performance and high ionic conductivity in potassium ion batteries. However, the dilute ether-based electrolytes usually result in ion-solvent co-intercalation of graphite, poor cycling stability, and hard to withstand high voltage cathodes above 4.0 V. To address the aforementioned issues, an electron-withdrawing group (chloro-substitution) was introduced to regulate the solid-electrolyte interphase (SEI) and enhance the oxidative stability of ether-based electrolytes. The dilute (~0.91 M) chloro-functionalized ether-based electrolyte not only facilitates the formation of homogeneous dual halides-based SEI, but also effectively suppress aluminum corrosion at high voltage. Using this functionalized electrolyte, the K||graphite cell exhibits a stability of 700 cycles, the K||Prussian blue (PB) cell (4.3 V) delivers a stability of 500 cycles, and the PB||graphite full-cell reveals a long stability of 6000 cycles with a high average Coulombic efficiency of 99.98 %. Additionally, the PB||graphite full-cell can operate under a wide temperature range from -5 °C to 45 °C. This work highlights the positive impact of electrolyte functionalization on the electrochemical performance, providing a bright future of ether-based electrolytes application for long-lasting, wide-temperature, and high Coulombic efficiency PIBs and beyond.

A Fast-Charge Graphite Anode with a Li-Ion-Conductive, Electron/Solvent-Repelling Interface.

Graphite has been serving as the key anode material of rechargeable Li-ion batteries, yet is difficultly charged within a quarter hour while maintaining stable electrochemistry. In addition to a defective edge structure that prevents fast Li-ion entry, the high-rate performance of graphite could be hampered by co-intercalation and parasitic reduction of solvent molecules at anode/electrolyte interface. Conventional surface modification by pitch-derived carbon barely isolates the solvent and electrons, and usually lead to inadequate rate capability to meet practical fast-charge requirements. Here we show that, by applying a MoOx-MoNx layer onto graphite surface, the interface allows fast Li-ion diffusion yet blocks solvent access and electron leakage. By regulating interfacial mass and charge transfer, the modified graphite anode delivers a reversible capacity of 340.3 mAh g-1 after 4000 cycles at 6 C, showing promises in building 10-min-rechargeable batteries with a long operation life.

Co-Intercalation-Free Graphite Anode Enabled by an Additive Regulated Interphase in an Ether-Based Electrolyte for Low-Temperature Lithium-Ion Batteries.

Graphite (Gr) anode, which is endowed with high electronic conductivity and low volume expansion after Li-ion intercalation, establishes the basis for the success of rocking-chair Li-ion batteries (LIBs). However, due to the high barrier of the Li-ion desolvation process, sluggish transport of Li ions through the solid electrolyte interphase (SEI) and the high freezing points of electrolytes, the Gr anode still suffers from great loss of capacity and severe polarization at low temperature. Here, 1,2-diethoxyethane (DEE) with an intrinsically wide liquid region and weak solvation ability is applied as an electrolyte solvent for LIBs. By rationally designing the additives of electrolytes, an intact SEI with fast Li-ion conductivity is constructed, enabling the co-intercalation-free Gr anode with long-term stability (91.8% after 500 cycles) and impressive low-temperature characteristics (82.6% capacity retention at -20 °C). Coupled with LiFePO4 and LiNi0.8Mn0.1Co0.1O2 cathodes, the optimized electrolyte also demonstrates low polarization under -20 °C. Our work offers a feasible approach to enable ether-based electrolytes for low-temperature LIBs.

Non-Electroconductive Polymer Coating on Graphite Mitigating Electrochemical Degradation of PTFE for a Dry-Processed Lithium-Ion Battery Anode.

Polytetrafluoroethylene (PTFE)-based dry process for lithium-ion batteries is gaining attention as a battery manufacturing scheme can be simplified with drastically reducing environmental damage. However, the electrochemical instability of PTFE in a reducing environment has hampered the realization of the high-performance dry-processed anode. In this study, we present a non-electroconductive and highly ionic-conductive polymer coating on graphite to mitigate the electrochemical degradation of the PTFE binder and minimize the coating resistance. Poly(ethylene oxide) (PEO) and poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) (P(VDF-TrFE-CFE)) coatings on the anode material effectively inhibit the electron transfer from graphite to PTFE, thereby alleviating the PTFE breakdown. The graphite polymer coatings improved initial Coulombic efficiencies of full cells from 67.2% (bare) to 79.1% (PEO) and 77.8% (P(VDF-TrFE-CFE)) and increased initial discharge capacity from 157.7 mAh g(NCM)-1 (bare) to 185.1 mAh g(NCM)-1 (PEO) and 182.5 mAh g(NCM)-1 (P(VDF-TrFE-CFE)) in the full cells. These outcomes demonstrate that PTFE degradation in the anode can be surmounted by adjusting the electron transfer to the PTFE.

Self-terminating, heterogeneous solid-electrolyte interphase enables reversible Li-ether cointercalation in graphite anodes.

Ether solvents are suitable for formulating solid-electrolyte interphase (SEI)-less ion-solvent cointercalation electrolytes in graphite for Na-ion and K-ion batteries. However, ether-based electrolytes have been historically perceived to cause exfoliation of graphite and cell failure in Li-ion batteries. In this study, we develop strategies to achieve reversible Li-solvent cointercalation in graphite through combining appropriate Li salts and ether solvents. Specifically, we design 1M LiBF4 1,2-dimethoxyethane (G1), which enables natural graphite to deliver ~91% initial Coulombic efficiency and >88% capacity retention after 400 cycles. We captured the spatial distribution of LiF at various length scales and quantified its heterogeneity. The electrolyte shows self-terminated reactivity on graphite edge planes and results in a grainy, fluorinated pseudo-SEI. The molecular origin of the pseudo-SEI is elucidated by ab initio molecular dynamics (AIMD) simulations. The operando synchrotron analyses further demonstrate the reversible and monotonous phase transformation of cointercalated graphite. Our findings demonstrate the feasibility of Li cointercalation chemistry in graphite for extreme-condition batteries. The work also paves the foundation for understanding and modulating the interphase generated by ether electrolytes in a broad range of electrodes and batteries.

Operando X-Ray Diffraction Boosting Understanding of Graphite Phase Evolution in Lithium-Ion Batteries.

The fast charging/discharging performance of lithium-ion batteries is closely related to the properties of electrode materials, especially the phase evolution and Li+ diffusion kinetics. The phase evolution and intrinsic properties of an electrode material under different C-rates can be investigated by applying operando X-ray diffraction (XRD). In this study, a transmission X-ray diffractometer is used in operando monitoring the behaviors of NCM811/Graphite pouch cells during charging/discharging at low rate (0.1C) and high rate (2.5C), especially the structure changes, phase evolution, and relaxation of graphite anode. The variations in XRD patterns, as well as and the inconsistency between the state of charge (SOC) of full cells and the SOC of electrodes, are explained based on genetic algorithm and shrinking annuli model. Furthermore, from the perspectives of monitoring and identification of electrode state, structural design of materials and electrodes, and optimization of charging/discharging protocols, practical suggestions for understanding the state and improving the performance of electrodes are proposed.

Bifunctional Interphase Promotes Li+ De-Solvation and Transportation Enabling Fast-Charging Graphite Anode at Low Temperature.

The most successful lithium-ion batteries (LIBs) based on ethylene carbonate electrolytes and graphite anodes still suffer from severe energy and power loss at temperatures below -20 °C, which is because of high viscosity or even solidification of electrolytes, sluggish de-solvation of Li+ at the electrode surface, and slow Li+ transportation in solid electrolyte interphase (SEI). Here, a coherent lithium phosphide (Li3P) coating firmly bonding to the graphite surface to effectively address these challenges is engineered. The dense, continuous, and robust Li3P interphase with high ionic conductivity enhances Li+ transportation across the SEI. Plus, it promotes Li+ de-solvation through an electron transfer mechanism, which simultaneously accelerates the charge transport kinetics and stands against the co-intercalation of low-melting-point solvent molecules, such as propylene carbonate (PC), 1,3-dioxolane, and 1,2-dimethoxyethane. Consequently, an unprecedented combination of high-capacity retention and fast-charging ability for LIBs at low temperatures is achieved. In full-cells encompassing the Li3P-coated graphite anode and PC electrolytes, an impressive 70% of their room-temperature capacity is attained at -20 °C with a 4 C charging rate and a 65% capacity retention is achieved at -40 °C with a 0.05 C charging rate. This research pioneers a transformative trajectory in fortifying LIB performance in cryogenic environments.

Growth of Vertical Graphene Sheets on Silicon Nanoparticles Well-Dispersed on Graphite Particles for High-Performance Lithium-Ion Battery Anode.

With rapidly increasing demand for high energy density, silicon (Si) is greatly expected to play an important role as the anode material of lithium-ion batteries (LIBs) due to its high specific capacity. However, large volume expansion for silicon during the charging process is still a serious problem influencing its cycling stability. Here, a Si/C composite of vertical graphene sheets/silicon/carbon/graphite (VGSs@Si/C/G) is reported to address the electrochemical stability issues of Si/graphite anodes, which is prepared by adhering Si nanoparticles on graphite particles with chitosan and then in situ growing VGSs by thermal chemical vapor deposition. As a promising anode material, due to the buffering effect of VGSs and tight bonding between Si and graphite particles, the composite delivers a high reversible capacity of 782.2 mAh g-1 after 1000 cycles with an initial coulombic efficiency of 87.2%. Furthermore, the VGSs@Si/C/G shows a diffusion coefficient of two orders higher than that without growing the VGSs. The full battery using VGSs@Si/C/G anode and LiNi0.8 Co0.1 Mn0.1 O2 cathode achieves a high gravimetric energy density of 343.6 Wh kg-1 , a high capacity retention of 91.5% after 500 cycles and an excellent average CE of 99.9%.

Solvent-Solvent Interaction Mediated Lithium-Ion (De)intercalation Chemistry in Propylene Carbonate Based Electrolytes for Lithium-Sulfur Batteries.

Reversible lithium-ion (de)intercalation in the carbon-based anodes using ethylene carbonate (EC) based electrolytes has enabled the commercialization of lithium-ion batteries, allowing them to dominate the energy storage markets for hand-held electronic devices and electric vehicles. However, this issue always fails in propylene carbonate (PC) based electrolytes due to the cointercalation of Li+-PC. Herein, we report that a reversible Li+ (de)intercalation could be achieved by tuning the solvent-solvent interaction in a PC-based electrolyte containing a fluoroether. We study the existence of such previously unknown interactions mainly by nuclear magnetic resonance (NMR) spectroscopy, while the analysis reveals positive effects on the solvation structure and desolvation process. We have found that the fluoroether solvents interact with PC via their δ-F and δ+H atoms, respectively, leading to a reduced Li+-PC solvent interaction and effective Li+ desolvation followed by a successful Li+ intercalation at the graphite anodes. We also propose an interfacial model to interpret the varied electrolyte stability by the differences in the kinetic and thermodynamic properties of the Li+-solvent and Li+-solvent-anion complexes. Compared to the conventional strategies of tuning electrolyte concentration and/or adding additives, our discovery provides an opportunity to enhance the compatibility of PC-based electrolytes with the graphite anodes, which will enable the design of high-energy density batteries (e.g., Li-S battery) with better environmental adaptabilities.

Kinetic Limits of Graphite Anode for Fast-Charging Lithium-Ion Batteries.

Fast-charging lithium-ion batteries are highly required, especially in reducing the mileage anxiety of the widespread electric vehicles. One of the biggest bottlenecks lies in the sluggish kinetics of the Li+ intercalation into the graphite anode; slow intercalation will lead to lithium metal plating, severe side reactions, and safety concerns. The premise to solve these problems is to fully understand the reaction pathways and rate-determining steps of graphite during fast Li+ intercalation. Herein, we compare the Li+ diffusion through the graphite particle, interface, and electrode, uncover the structure of the lithiated graphite at high current densities, and correlate them with the reaction kinetics and electrochemical performances. It is found that the rate-determining steps are highly dependent on the particle size, interphase property, and electrode configuration. Insufficient Li+ diffusion leads to high polarization, incomplete intercalation, and the coexistence of several staging structures. Interfacial Li+ diffusion and electrode transportation are the main rate-determining steps if the particle size is less than 10 µm. The former is highly dependent on the electrolyte chemistry and can be enhanced by constructing a fluorinated interphase. Our findings enrich the understanding of the graphite structural evolution during rapid Li+ intercalation, decipher the bottleneck for the sluggish reaction kinetics, and provide strategic guidelines to boost the fast-charging performance of graphite anode.

Nonfluorinated Antisolvents for Ultrastable Potassium-Ion Batteries.

A robust interface between the electrode and electrolyte is essential for the long-term cyclability of potassium-ion batteries (PIBs). An effective strategy for achieving this objective is to enhance the formation of an anion-derived, robust, and stable solid-electrolyte interphase (SEI) via electrolyte structure engineering. Herein, inspired by the application of antisolvents in recrystallization, we propose a nonfluorinated antisolvent strategy to optimize the electrolyte solvation structure. In contrast to the conventional localized superconcentrated electrolyte introducing high-fluorinated ether solvent, the anion-cation interaction is considerably enhanced by introducing a certain amount of nonfluorinated antisolvent into a phosphate-based electrolyte, thereby promoting the formation of a thin and stable SEI to ensure excellent cycling performance of PIBs. Consequently, the nonfluorinated antisolvent electrolyte exhibits superior stability in the K||graphite cell (negligible capacity degradation after 1000 cycles) and long-term cycling in the K||K symmetric cell (>2200 h), as well as considerably improved oxidation stability. This study demonstrates the feasibility of optimized electrolyte engineering with a nonfluorinated antisolvent, providing an approach to realizing superior electrochemical energy storage systems in PIBs.

GD-OES Investigations of Lithium-Ion Battery Graphite Anodes: Impact of Plasma Parameters and Electrode Properties.

Due to the demand of lithium-ion battery investigations with glow discharge optical emission spectroscopy (GD-OES), a fundamental study of the influence of essential GD-OES parameters toward graphite anodes in an argon plasma was conducted and compared to previous investigations of massive materials. It is shown that increased applied voltage (500-700 V) enhances the sputtering rate by up to 100%/100 V while keeping the crater shape unaffected. In contrast to this, gas pressure variation seems to be the main tool for crater shape adjustment. Enhancement of the gas pressure (160-300 Pa) pushes the crater profile from a concave to flat shape and to concave again. Known plasma effects are discussed and correlated with the observations. A set of measuring parameters providing a good balance between the crater shape and the sputtering rate is proposed. Additionally, an increase of the duty cycle in the pulsed glow discharge mode leads to a linear increase of the sputtering rate, while a pulse duration rise enhances the sputtering rate in a nonlinear fashion. Thus, different pulsing conditions represent instruments for enhancement of the sputtering rate without affecting the crater shape significantly. Our investigation of different electrode densities shows that lower densities lead to a larger sputtered volume as well as a larger concavity of the released crater.