ABSTRACT
The quantification of pesticide dissipation in agricultural soil is challenging. In this study, we investigated atrazine biodegradation in both liquid and soil experiments bioaugmented with distinct atrazine-degrading bacterial isolates. This was achieved by combining 14C-mineralisation assays and compound-specific isotope analysis of atrazine. In liquid experiments, the three bacterial isolates mineralised over 40% of atrazine, demonstrating their potential for extensive degradation. However, the kinetics of mineralisation and degradation varied among the isolates. Carbon stable isotope fractionation was similar for Pseudomonas isolates ADPT34 and ADP2T0, but slightly higher for Chelatobacter SR27. In soil experiments, atrazine primarily degraded into atrazine-desethyl, while atrazine-hydroxy was mainly observed in experiments with SR27. Atrazine mineralisation in soil by ADPT34 and SR27 exceeded 40%, whereas ADP2T0 exhibited a mineralisation rate of 10%. In experiments with ADPT34 and SR27, atrazine 14C-residues were predominantly found in the non-extractable fraction, whereas they accumulated in the extractable fraction in the experiment with ADP2T0. Compound-specific isotope analysis (CSIA) relies on changes of stable isotope ratios and holds potential to evaluate herbicide transformation in soil. CSIA of atrazine indicated atrazine biodegradation in water and solvent extractable soil fractions and varied between 29% and 52%, depending on the bacterial isolate. Despite atrazine degradation in both soil fractions, a significant portion of atrazine residues persisted, depending on the bacterial degrader, initial cell concentration, and mineralisation and degradation rates. Overall, our approach can aid in quantifying atrazine persistence and degradation in soil, and in optimizing bioaugmentation strategies for remediating soils contaminated with persistent herbicides.
ABSTRACT
A class of chemical with a potentially important perceived future contribution to the net zero carbon goal (as "green" solvents) is the methylimidazolium ionic liquids (MILs). These solvents are used in industrial processes such as biofuel production yet little is known about their environmental stability or toxicity in man although one MIL - 1-octyl-3-methylimidazolium (M8OI) - has been shown to activate the human estrogen receptor alpha (ERα). The stabilities of the chloride unsubstituted methylimidazolium (MI) and MILs possessing increasing alkyl chain lengths (2C, 1-ethyl-3-methylimidazolium (EMI); 4C, 1-butyl-3-methylimidazolium (BMI); 6C; 1-hexyl-3-methylimidazolium (HMI), 8C, M8OI; 10C, 1-decyl-3-methylimidazolium (DMI)) were examined in river water and a human liver model system. The MILs were also screened for their abilities to activate the human ERα in vitro and induce uterine growth in pre-pubertal rats in vivo. Short chain MILs (EMI, BMI and HMI) underwent negligible metabolism and mineralisation in river water; were not metabolised in a model of human liver metabolism; activated the human ERα in vitro and were estrogenic in vivo in rats. A structure-based computational approach predicted short chain MIL binding to both the estrogen binding site and an additional site on the human estrogen receptor alpha. Longer chain MILs (M8OI and DMI) were metabolised in river water and partially mineralised. Based on structure-activity considerations, some of these environmentally-derived metabolites may however, remain a hazard to the population. MILs therefore have the potential to become forever chemicals with adverse effects to both man, other animals and the environment in general.
ABSTRACT
One of the deficits of knowledge on bone remodelling, is to what extent cells that are driven towards osteogenic differentiation can contribute to osteoclast formation. The periodontal ligament fibroblast (PdLFs) is an ideal model to study this, since they play a role in osteogenesis, and can also orchestrate osteoclastogenesis.when co-cultured with a source of osteoclast-precursor such as peripheral blood mononuclear cells (PBMCs). Here, the osteogenic differentiation of PdLFs and the effects of this process on the formation of osteoclasts were investigated. PdLFs were obtained from extracted teeth and exposed to osteogenic medium for 0, 7, 14, or 21 out of 21 days. After this 21-day culturing period, the cells were co-cultured with peripheral blood mononuclear cells (PBMCs) for an additional 21 days to study osteoclast formation. Alkaline phosphatase (ALP) activity, calcium concentration, and gene expression of osteogenic markers were assessed at day 21 to evaluate the different stages of osteogenic differentiation. Alizarin red staining and scanning electron microscopy were used to visualise mineralisation. Tartrate-resistant acid phosphatase (TRAcP) activity, TRAcP staining, multinuclearity, the expression of osteoclastogenesis-related genes, and TNF-α and IL-1ß protein levels were assessed to evaluate osteoclastogenesis. The osteogenesis assays revealed that PdLFs became more differentiated as they were exposed to osteogenic medium for a longer period of time. Mineralisation by these osteogenic cells increased with the progression of differentiation. Culturing PdLFs in osteogenic medium before co-culturing them with PMBCs led to a significant decrease in osteoclast formation. qPCR revealed significantly lower DCSTAMP expression in cultures that had been supplemented with osteogenic medium. Protein levels of osteoclastogenesis stimulator TNF-α were also lower in these cultures. The present study shows that the osteogenic differentiation of PdLFs reduces the osteoclastogenic potential of these cells. Immature cells of the osteoblastic lineage may facilitate osteoclastogenesis, whereas mature mineralising cells may suppress the formation of osteoclasts. Therefore, mature and immature osteogenic cells may have different roles in maintaining bone homeostasis.
ABSTRACT
Osteoporosis (OP) is a chronic progressive bone disease which is characterised by reduction of bone matrix volume and changes in the bone matrix properties which can ultimately lead to bone fracture. The two major forms of OP are related to aging and/or menopause. With the worldwide increase of the elderly population, particularly age-related OP poses a serious health issue which puts large pressure on health care systems. A major challenge for development of new drug treatments for OP and comparison of drug efficacy with existing treatments is due to current regulatory requirements which demand testing of drugs based on bone mineral density (BMD) in phase 2 trials and fracture risk in phase 3 trials. This requires large clinical trials to be conducted and to be run for long time periods, which is very costly. This, together with the fact that there are already many drugs available for treatment of OP, makes the development of new drugs inhibitive. Furthermore, an increased trend of the use of different sequential drug therapies has been observed in OP management, such as sequential anabolic-anticatabolic drug treatment or switching from one anticatabolic drug to another. Running clinical trials for concurrent and sequential therapies is neither feasible nor practical due to large number of combinatorial possibilities. In silico mechanobiological pharmacokinetic-pharmacodynamic (PK-PD) models of OP treatments allow predictions beyond BMD, i.e. bone microdamage and degree of mineralisation can also be monitored. This will help to inform clinical drug usage and development by identifying the most promising scenarios to be tested clinically (confirmatory trials rather than exploratory only trials), optimise trial design and identify subgroups of the population that show benefit-risk profiles (both good and bad) that are different from the average patient. In this review, we provide examples of the predictive capabilities of mechanobiological PK-PD models. These include simulation results of PMO treatment with denosumab, implications of denosumab drug holidays and coupling of bone remodelling models with calcium and phosphate systems models that allows to investigate the effects of co-morbidities such as hyperparathyroidism and chronic kidney disease together with calcium and vitamin D status on drug efficacy.
Subject(s)
Osteoporosis , Humans , Osteoporosis/drug therapy , Models, Biological , Biomechanical Phenomena , Bone Density/drug effectsABSTRACT
Unprecedented plastic production has resulted in over six billion tons of harmful waste. Certain insect taxa emerge as potential agents of plastic biodegradation. Through a comprehensive manual and bibliometric literature analysis, this review analyses and consolidates the growing literature related to insect-mediated plastic breakdown. Over 23 insect species, representing Coleoptera, Lepidoptera, and 4 other orders, have been identified for their capacity to consume plastic polymers. Natural and synthetic polymers exhibit high-level similarities in molecular structure and properties. Thus, in conjunction with comparative genomics studies, we link plastic-degrading enzymatic capabilities observed in certain insects to the exaptation of endogenous enzymes originally evolved for digesting lignin, cellulose, beeswax, keratin and chitin from their native dietary substrates. Further clarification is necessary to distinguish mineralisation from physicochemical fragmentation and to differentiate microbiome-mediated degradation from direct enzymatic reactions by insects. A bibliometric analysis of the exponentially growing body of literature showed that leading research is emerging from China and the USA. Analogies between natural and synthetic polymer's degradation pathways will inform engineering robust enzymes for practical plastic bioremediation applications. By aggregating, analysing, and interpreting published insights, this review consolidates our mechanistic understanding of insects as a potential natural solution to the escalating plastic waste crisis.
ABSTRACT
The collective drive towards achieving net-zero greenhouse gas emissions by 2050 has spurred interest in engineering solutions for carbon capture and storage worldwide. One such approach involves the permanent storage of CO2 in earth-abundant Ca-, Fe-, and Mg-bearing silicate rocks and minerals as carbonates via the process of CO2 mineralisation. This necessitates a thorough understanding of carbonate conversion under geologically relevant conditions. Nevertheless, research on CO2 injection for mineralisation via naturally fractured host rocks or induced fractures, with a research emphasis on rock mechanics and stimulated reservoir volumes (SRV) within geoengineering CO2 storage, is continuously expanding. This research addresses critical challenges related to identifying favourable geographic locations for CO2 mineralisation. It specifically focuses on the abundant availability of Mg, Ca, and Fe cations for exothermic CO2 reactions and their impact on fracture conductivity during in-situ mineralisation. A comprehensive analysis of 26 dunite and serpentinite samples from diverse locations in Australia and New Zealand, including 10 from a cored drilled hole, was conducted. Quantification of divalent cation (Mg, Ca, Fe) content and cation release capacity using XRF and XRD revealed higher cation percentages in dunite samples (approximately 30 %) compared to serpentinite samples (approximately 26 %). Additionally, the study estimated the stimulated rock mass-to-CO2 sequestered ratio, [Formula: see text] , with dunite samples averaging approximately 2.20 [Formula: see text] values and serpentinite samples averaging approximately 2.53. Geomechanical testing enabled the prediction of fracture propagation pressures during aqueous CO2 injection for in-situ mineralisation and the estimation of fracture geometries, emphasizing the role of rock stiffness in determining fracture width (averaging 6.0 mm). Furthermore, the research estimated the rock volume exposed to CO2-laden fluid during injection, particularly focusing on the GHQ-3 sample, which theoretically amounted to approximately 600 kg of rock capable of sequestering around 300 kg of CO2 for a 10 m3 fluid volume with a CO2 concentration of 1molkg-1. The study established a relationship between injected volume and CO2 uptake, suggesting the potential for significant CO2 sequestration scalability by employing horizontal wells and fracturing additional zones, thereby creating and intersecting multiple transverse fractures along a single target zone.
ABSTRACT
The MC3T3-E1 preosteoblastic cell line is widely utilised as a reliable in vitro system to assess bone formation. However, the experimental growth conditions for these cells hugely diverge, and, particularly, the osteogenic medium (OSM)'s composition varies in research studies. Therefore, we aimed to define the ideal culture conditions for MC3T3-E1 subclone 4 cells with regard to their mineralization capacity and explore if oxidative stress or the cellular metabolism processes are implicated. Cells were treated with nine different combinations of long-lasting ascorbate (Asc) and ß-glycerophosphate (ßGP), and osteogenesis/calcification was evaluated at three different time-points by qPCR, Western blotting, and bone nodule staining. Key molecules of the oxidative and metabolic pathways were also assessed. It was found that sufficient mineral deposition was achieved only in the 150 µg.mL-1/2 mM Asc/ßGP combination on day 21 in OSM, and this was supported by Runx2, Alpl, Bglap, and Col1a1 expression level increases. NOX2 and SOD2 as well as PGC1α and Tfam were also monitored as indicators of redox and metabolic processes, respectively, where no differences were observed. Elevation in OCN protein levels and ALP activity showed that mineralisation comes as a result of these differences. This work defines the most appropriate culture conditions for MC3T3-E1 cells and could be used by other research laboratories in this field.
Subject(s)
Energy Metabolism , Osteoblasts , Osteogenesis , Oxidative Stress , Animals , Mice , Osteogenesis/drug effects , Osteoblasts/metabolism , Osteoblasts/cytology , Cell Line , Glycerophosphates/metabolism , Glycerophosphates/pharmacology , Calcification, Physiologic , Cell Differentiation , Cell Culture Techniques/methods , Ascorbic Acid/pharmacology , Ascorbic Acid/metabolism , Culture Media/chemistry , Culture Media/pharmacologyABSTRACT
Large mammalian herbivores substantially impact ecosystem functioning. As their populations are dramatically altered globally, disentangling their consumptive and non-consumptive effects is critical to advance mechanistic understanding and improve prediction of effects over ecosystem and Earth-system spatial extents. Mathematical models have played an important role in clarifying potential mechanisms of herbivore zoogeochemistry, based mostly on their consumptive effects as primary consumers and recyclers of organic and inorganic matter via defecation and urination. Trampling is a ubiquitous effect among walking vertebrates, but the consequences and potential mechanisms of trampling in diverse environments remain poorly understood. We derive a novel mathematical model of large mammalian herbivore effects on ecosystem nitrogen cycling, focusing on how trampling and environmental context impact soil processes. We model herbivore trampling with a linear positive or negative additive effect on soil-mediated nitrogen cycling processes. Combining analytical and numerical analyses, we find trampling by large mammalian herbivores is likely to decrease nitrogen mineralisation rate across diverse environments, such as temperate grassland and boreal forest. These effects are mediated by multiple potential mechanisms, including trampling-induced changes to detritivore biomass and functioning (e.g. rate of organic matter consumption). We also uncover scenarios where trampling can increase nitrogen mineralisation rate, contingent on the environment-specific relative sensitivity of detritivore mineral-nitrogen release and detritivore mortality, to trampling. In contrast to some consumptive mechanisms, our results suggest the pace of soil nitrogen cycling prior to trampling has little influence over the direction of the trampling net effect on nitrogen mineralisation, but that net effects may be greater in slow-cycling systems (e.g. boreal forests) than in fast-cycling systems (e.g. grasslands). Our model clarifies the potential consequences of previously overlooked mechanisms of zoogeochemistry that are common to all terrestrial biomes. Our results provide empirically testable predictions to guide future progress in empirical and theoretical studies of herbivore effects in diverse environmental contexts. Resolving ecological contingencies around animal consumptive and non-consumptive effects will improve whole-ecosystem management efforts such as restoration and rewilding.
Subject(s)
Herbivory , Mammals , Nitrogen Cycle , Soil , Animals , Mammals/physiology , Soil/chemistry , Models, Biological , Ecosystem , Nitrogen/metabolismABSTRACT
The dentine sialophosphoprotein (DSPP) gene is the only identified causative gene for dentinogenesis imperfecta type 2 (DGI-II), dentinogenesis imperfecta type 3 (DGI-III) and dentine dysplasia type 2 (DD-II). These three disorders may have similar molecular mechanisms involved in bridging the DSPP mutations and the resulting abnormal dentine mineralisation. The DSPP encoding proteins DSP (dentine sialoprotein) and DPP (dentine phosphoprotein) are positive regulators of dentine formation and perform a function during dentinogenesis. The present review focused on the recent findings and viewpoints regarding the relationship between DSPP and dentinogenesis as well as mineralisation from multiple perspectives, involving studies relating to spatial structure and tissue localisation of DSPP, DSP and DPP, the biochemical characteristics and biological function of these molecules, and the causative role of the proteins in phenotypes of the knockout mouse model and in hereditary dentine defects.
Subject(s)
Calcinosis , Dentinogenesis Imperfecta , Phosphoproteins , Sialoglycoproteins , Animals , Mice , Calcification, Physiologic , Dentin , Dentinogenesis Imperfecta/genetics , Disease Models, Animal , Mice, Knockout , Humans , Sialoglycoproteins/genetics , Phosphoproteins/geneticsABSTRACT
Porous titanium scaffolds fabricated by powder bed fusion additive manufacturing techniques have been widely adopted for orthopedic and bone tissue engineering applications. Despite the many advantages of this approach, topological defects inherited from the fabrication process are well understood to negatively affect mechanical properties and pose a high risk if dislodged after implantation. Consequently, there is a need for further post-process surface cleaning. Traditional techniques such as grinding or polishing are not suited to lattice structures, due to lack of a line of sight to internal features. Chemical etching is a promising alternative; however, it remains unclear if changes to surface properties associated with such protocols will influence how cells respond to the material surface. In this study, we explored the response of bone marrow derived mesenchymal stem/stromal cells (MSCs) to Ti-6Al-4V whose surface was exposed to different durations of chemical etching. Cell morphology was influenced by local topological features inherited from the SLM fabrication process. On the as-built surface, topological nonhomogeneities such as partially adhered powder drove a stretched anisotropic cellular morphology, with large areas of the cell suspended across the nonhomogeneous powder interface. As the etching process was continued, surface defects were gradually removed, and cell morphology appeared more isotropic and was suggestive of MSC differentiation along an osteoblastic-lineage. This was accompanied by more extensive mineralization, indicative of progression along an osteogenic pathway. These findings point to the benefit of post-process chemical etching of additively manufactured Ti-6Al-4V biomaterials targeting orthopedic applications.
Subject(s)
Alloys , Biocompatible Materials , Lasers , Mesenchymal Stem Cells , Titanium , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/metabolism , Titanium/chemistry , Alloys/chemistry , Alloys/pharmacology , Biocompatible Materials/chemistry , Calcification, Physiologic/drug effects , Animals , Cell Differentiation/drug effects , Humans , Surface Properties , Materials TestingABSTRACT
Microplastics (MPs) composed of different polymers with various shapes, within a vast granulometric distribution (1 µm - 5 mm) and with a wide variety of physicochemical surface and bulk characteristics spiral around the globe, with different atmospheric, oceanic, cryospheric, and terrestrial residence times, while interacting with other pollutants and biota. The challenges of microplastic pollution are related to the complex relationships between the microplastic generation mechanisms (physical, chemical, and biological), their physicochemical properties, their interactions with other pollutants and microorganisms, the changes in their properties with aging, and their small sizes that facilitate their diffusion and transportation between the air, water, land, and biota, thereby promoting their ubiquity. Early career researchers (ERCs) constitute an essential part of the scientific community committed to overcoming the challenges of microplastic pollution with their new ideas and innovative scientific perspectives for the development of remediation technologies. However, because of the enormous amount of scientific information available, it may be difficult for ERCs to determine the complexity of this environmental issue. This mini-review aims to provide a quick and updated overview of the essential insights of microplastic pollution to ERCs to help them acquire the background needed to develop highly innovative physical, chemical, and biological remediation technologies, as well as valorization proposals and environmental education and awareness campaigns. Moreover, the recommendations for the development of holistic microplastic pollution remediation strategies presented here can help ERCs propose technologies considering the environmental, social, and practical dimensions of microplastic pollution while fulfilling the current government policies to manage this plastic waste.
Subject(s)
Environmental Pollutants , Water Pollutants, Chemical , Microplastics , Plastics , Environmental Monitoring , Water Pollutants, Chemical/analysis , EcosystemABSTRACT
OBJECTIVES: This study aimed to compare two types of bioactive additives which were strontium-containing fluorinated bioactive glass (SrBGF) or strontium-containing fluorapatite (SrFA) added to sol-gel derived glass ionomer cement (SGIC). The objective was to develop antibacterial and mineralisation properties, using bioactive additives, to minimize the occurrence of caries lesions in caries disease. METHODS: Synthesized SrBGF and SrFA nanoparticles were added to SGIC at 1 wt% concentration to improve antibacterial properties against S. mutans, promote remineralisation, and hASCs and hDPSCs viability. Surface roughness and ion-releasing behavior were also evaluated to clarify the effect on the materials. Antibacterial activity was measured via agar disc diffusion and bacterial adhesion. Remineralisation ability was assessed by applying the material to demineralised teeth and subjecting them to a 14-day pH cycle, followed by microCT and SEM-EDS analysis. RESULTS: The addition of SrFA into SGIC significantly improved its antibacterial property. SGIC modified with either SrBGF or SrFA additives could similarly induce apatite crystal precipitation onto demineralised dentin and increase dentin density, indicating its ability to remineralise dentin. Moreover, this study also showed that SGIC modified with SrBGF or SrFA additives had promising results on the in vitro cytotoxicity of hASC and hDPSC. SIGNIFICANT: SrFA has superior antibacterial property as compared to SrBGF while demonstrating equal remineralisation ability. Furthermore, the modified SGIC showed promising results in reducing the cytotoxicity of hASCs and hDPSCs, indicating its potential for managing caries.
Subject(s)
Dental Caries , Fluorides , Humans , Fluorides/pharmacology , Fluorides/chemistry , Glass Ionomer Cements/pharmacology , Glass Ionomer Cements/chemistry , Strontium/pharmacology , Strontium/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Apatites/pharmacology , Dental Caries/therapy , Materials TestingABSTRACT
Tendon calcification is a commonly associated with degenerative tendinopathy of the Achilles tendons in dogs. It is characterised by the formation of calcific deposits and is refractory to treatment, often re-forming after surgical removal. Little is known about its pathogenesis and therefore the aims of this study were to develop an in vitro model of canine tendon calcification and use this model to investigate mechanisms driving calcification. Cells from the canine Achilles tendon were cultured with different calcifying media to establish which conditions were best able to induce specific, cell-mediated calcification. Once optimum calcification conditions had been established, the effect of ATP treatment on calcification was assessed. Results revealed that 2 mM di-sodium phosphate combined with 2 mM calcium chloride provided the optimum calcifying conditions, increasing calcium deposition and expression of osteogenic-related genes similar to those observed in tendon calcification in vivo. ATP treatment inhibited calcification in a dose-dependent manner, reducing calcium deposition and increasing cell viability, while osteogenic-related genes were no longer upregulated. In conclusion, the in vitro model of canine tendon calcification developed in this study provides the ability to study mechanisms driving tendon calcification, demonstrating that ATP plays a role in modulating tendon calcification that should be explored further in future studies.
Subject(s)
Achilles Tendon , Adenosine Triphosphate , Calcinosis , Animals , Dogs , Adenosine Triphosphate/metabolism , Calcinosis/veterinary , Calcinosis/pathology , Achilles Tendon/pathology , Achilles Tendon/drug effects , Dog Diseases/pathology , Cells, Cultured , Tendinopathy/veterinary , Tendinopathy/pathologyABSTRACT
The mechanical quality of trabecular bone is influenced by its mineral content and spatial distribution, which is controlled by bone remodelling and mineralisation. Mineralisation kinetics occur in two phases: a fast primary mineralisation and a secondary mineralisation that can last from several months to years. Variations in bone turnover and mineralisation kinetics can be observed in the bone mineral density distribution (BMDD). Here, we propose a statistical spatio-temporal bone remodelling model to study the effects of bone turnover (associated with the activation frequency Ac . f ) and mineralisation kinetics (associated with secondary mineralisation T sec ) on BMDD. In this model, individual basic multicellular units (BMUs) are activated discretely on trabecular surfaces that undergo typical bone remodelling periods. Our results highlight that trabecular BMDD is strongly regulated by Ac . f and T sec in a coupled way. Ca wt% increases with lower Ac . f and short T sec . For example, a Ac . f = 4 BMU/year/mm 3 and T sec = 8 years result in a mean Ca wt% of 25, which is in accordance with Ca wt% values reported in quantitative backscattered electron imaging (qBEI) experiments. However, for lower Ac . f and shorter T sec (from 0.5 to 4 years) one obtains a high Ca wt% and a very narrow skew BMDD to the right. This close link between Ac . f and T sec highlights the importance of considering both characteristics to draw meaningful conclusion about bone quality. Overall, this model represents a new approach to modelling healthy and diseased bone and can aid in developing deeper insights into disease states like osteoporosis.
Subject(s)
Bone Density , Bone Remodeling , Calcification, Physiologic , Cancellous Bone , Kinetics , Humans , Models, Biological , Models, StatisticalABSTRACT
1. Based on the hypothesis that 25-hydroxycholecalciferol (25-OH-D3) inclusion would optimise dietary mineral digestibility and ameliorate growth performance and bone mineralisation in available phosphorus (AvP) deficient-fed broilers, a trial was conducted to evaluate its effect on diets with different levels of AvP.2. Broilers aged 1-21 d were randomly assigned one of the eight treatments, consisting of four dietary levels of AvP (0.45%, 0.42%, 0.39%, and 0.36%) and with or without supplementation with 25-OH-D3 at 69 µg/kg of feed. All diets contained 100 µg/kg of vitamin D3 (cholecalciferol).3. The addition of 25-OH-D3 resulted in higher feed intake and body weight gain, and lower FCR (P < 0.05) compared to non-supplemented diets, whereas AvP levels had a quadratic effect only on feed intake. There were no interactions between treatment factors.4. Increasing AvP levels linearly reduced the ileal digestibility of Ca and P (P < 0.01) and supplementing 25-OH-D3 increased both Ca and P ileal digestibility (P < 0.05), without any interactions observed for ileal digestibility.5. There was an interaction, whereby 25-OH-D3 inclusion increased serum metabolites in broilers fed 0.36% to 0.42% AvP compared to the non-supplemented diets (P < 0.001), whereas, at 0.45% AvP, diets with or without 25-OH-D3 had similar results.6. The P content in bone linearly increased in line with AvP levels (P < 0.05) and supplementation of 25-OH-D3 increased ash bone content (P < 0.001).7. Broilers can benefit from 25-OH-D3 supplementation combined with cholecalciferol with regard to Ca and P utilisation and vitamin D status, allowing for a reduction of dietary AvP levels down to 0.36% without impairing growth performance or bone status.
Subject(s)
Calcifediol , Phosphorus, Dietary , Animals , Phosphorus, Dietary/metabolism , Dietary Supplements , Chickens , Cholecalciferol/metabolism , Vitamin D/metabolism , Phosphorus/metabolismABSTRACT
Ectomycorrhizal fungi (ECMFs) that are involved in phosphorus mobilisation and turnover have limited ability to mineralise phytate alone. The endofungal bacteria in the ectomycorrhizal fruiting body may contribute to achieving this ecological function of ECMFs. We investigated the synergistic effect and mechanisms of endofungal bacteria and ECMF Suillus grevillea on phytate mineralisation. The results showed that soluble phosphorus content in the combined system of endofungal bacterium Cedecea lapagei and S. grevillea was 1.8 times higher than the sum of C. lapagei and S. grevillea alone treatment under the phytate mineralisation experiment. The S. grevillea could first chemotactically assist C. lapagei in adhering to the surface of S. grevillea. Then, the mineralisation of phytate was synergistically promoted by increasing the biomass of C. lapagei and the phosphatase and phytase activities of S. grevillea. The expression of genes related to chemotaxis, colonisation, and proliferation of C. lapagei and genes related to phosphatase and phytase activity of S. grevillea was also significantly upregulated. Furthermore, in the pot experiment, we verified that there might exist a ternary symbiotic system in the natural forest in which endofungal bacteria and ECMFs could synergistically promote phytate uptake in the plant Pinus massoniana via the ectomycorrhizal system.
Subject(s)
6-Phytase , Mycorrhizae , Pinus , Mycorrhizae/metabolism , Pinus/metabolism , Phosphorus/metabolism , 6-Phytase/metabolism , Phytic Acid/metabolism , Phosphoric Monoester Hydrolases/metabolism , Bacteria/metabolismABSTRACT
Arsenic (As) and cadmium (Cd) are considered toxic elements, even at trace levels. Their accurate quantification in crops can be complex at low levels and due to interference with other elements. The aim of this work was to develop and validate an analytical method for As and Cd quantification in rice stem and grains from the production systems "Irrigated Rice Ecosystems" (IRE) and "Rainfed Rice Ecosystems" (RRE) in Colombia. Mineralisation was carried out by acid digestion using an open system with a heating plate. Metal detection was performed by inductively coupled plasma optical emission spectrometry (ICP-OES). Method adjustment, calibration, and validation were performed in accordance with AOAC standards, considering sensitivity, precision, accuracy, and selectivity parameters. The obtained method was applied to quantify levels in 259 rice stem and 443 grain samples from IRE and RRE.
Subject(s)
Arsenic , Oryza , Soil Pollutants , Cadmium/analysis , Arsenic/analysis , Oryza/chemistry , Ecosystem , Food Contamination/analysis , Spectrum Analysis , Soil Pollutants/analysisABSTRACT
CASE HISTORY: Necropsies on Toggenburg goats culled from a small farm in the Manawatu district of New Zealand, performed at Massey University (Palmerston North, NZ) over a period of 29 years (1991-2019), revealed soft tissue mineralisation, particularly of cardiovascular tissues. The farm spans 10 acres and runs between 15 and 30 Toggenburg goats. The goats are predominantly on pasture comprising a variety of types. PATHOLOGICAL FINDINGS: Necropsies were performed on all adult goats (n = 45) that died or were euthanised. Histopathology was performed on 42 goats (93%), of which 33 (73%) included sufficient tissues diagnostically relevant to soft tissue mineralisation. The most significant gross findings were in various arteries, with the aorta most commonly affected, followed by the heart and lungs. The aortic intima showed prominent, multifocal to coalescing, raised, wrinkled, white plaques. Microscopically there were multiphasic lesions of mineralisation, chondroid, and osseous metaplasia in the elastic arteries, aorta, heart and lungs. A lumbar vertebra from one goat had prominent, basophilic, fibrillar, tangled matrix lining Haversian canals and lamellae. LABORATORY FINDINGS: Blood samples were collected from 15 adult goats in the affected herd and from 10 adult Toggenburg goats from an unaffected herd. Samples were collected by jugular venipuncture at 2-month intervals for 12 months (April 2018-March 2019). Concentrations of calcium, phosphorus, 25-hydroxyvitamin D2 and D3 (25OHD2, 25OHD3) in serum were analysed. The concentration of total 25OHD in serum was 34.2 (95% CI = 18.9-49.4) nmol/L (p < 0.001) higher in goats from the affected herd than in goats from the unaffected herd. Serum 25OHD2 concentration was 46.2 (95% CI = 39.2-53.2) nmol/L higher (p < 0.001) in goats from the affected herd compared to the unaffected herd. Serum Ca concentrations in affected goats were 0.101 (95% CI = 0.005-0.196) mmol/L higher (p = 0.039) than unaffected goats, but remained within the reference range. There was no evidence of a difference in serum 25OHD3 and P concentration between the herds. VEGETATION SURVEY: All paddocks on the property were surveyed every 2 months along evenly spaced line transects, and then further traversed perpendicularly to form a grid. No known calcinogenic species were identified. Known plant sources of vitamin D identified on the farm included mushrooms (species not defined), Dactylis glomerata, lichen, pine pollen, and algae. DIAGNOSIS: Soft tissue mineralisation and enzootic calcinosis. CLINICAL RELEVANCE: Veterinarians are alerted to the possibility of either enzootic calcinosis in goats and the potential occurrence of calcinogenic plants in New Zealand; or chronic vitamin D toxicosis of non-plant origin.
Subject(s)
Calcinosis , Goat Diseases , Humans , Animals , New Zealand/epidemiology , Vitamin D , Calcifediol , Calcinosis/pathology , Calcinosis/veterinary , Goats , Goat Diseases/epidemiologyABSTRACT
Zinc is incorporated into enamel, dentine and cementum during tooth growth. This work aimed to distinguish between the processes underlying Zn incorporation and Zn distribution. These include different mineralisation processes, the physiological events around birth, Zn ingestion with diet, exposure to the oral environment during life and diagenetic changes to fossil teeth post-mortem. Synchrotron X-ray Fluorescence (SXRF) was used to map zinc distribution across longitudinal polished ground sections of both deciduous and permanent modern human, great ape and fossil hominoid teeth. Higher resolution fluorescence intensity maps were used to image Zn in surface enamel, secondary dentine and cementum, and at the neonatal line (NNL) and enamel-dentine-junction (EDJ) in deciduous teeth. Secondary dentine was consistently Zn-rich, but the highest concentrations of Zn (range 197-1743 ppm) were found in cuspal, mid-lateral and cervical surface enamel and were similar in unerupted teeth never exposed to the oral environment. Zinc was identified at the NNL and EDJ in both modern and fossil deciduous teeth. In fossil specimens, diagenetic changes were identified in various trace element distributions but only demineralisation appeared to markedly alter Zn distribution. Zinc appears to be tenacious and stable in fossil tooth tissues, especially in enamel, over millions of years.
ABSTRACT
The purpose of the study is to develop a novel peptide for caries management. Gallic-Acid-Polyphemusin-I (GAPI) was synthesised by grafting Polyphemusin I (PI) and gallic acid (GA). Biocompatibility was evaluated using a Cell Counting Kit-8 Assay. Antimicrobial properties were assessed using minimum inhibitory concentration (MIC) and minimum bactericidal/fungicidal concentration (MBC/MFC). The bacterial and fungal morphology after GAPI treatment was investigated using transmission electron microscopy (TEM). The architecture of a consortium biofilm consisting of Streptococcus mutans, Lacticaseibacillus casei and Candida albicans was evaluated using scanning electron microscopy (SEM) and confocal laser scanning microscopy. The growth kinetics of the biofilm was examined using a propidium monoazide-quantitative polymerase chain reaction. The surface and calcium-to-phosphorus molar ratio of GAPI-treated enamel after pH cycling were examined with SEM and energy-dispersive X-ray spectroscopy. Enamel crystal characteristics were analysed using X-ray diffraction. Lesion depths representing the enamel's mineral loss were assessed using micro-computed tomography. The MIC of GAPI against S. mutans, L. casei and C. albicans were 40 µM, 40 µM and 20 µM, respectively. GAPI destroyed the biofilm's three-dimensional structure and inhibited the growth of the biofilm. SEM showed that enamel treated with GAPI had a relatively smooth surface compared to that treated with water. The calcium-to-phosphorus molar ratio of enamel treated with GAPI was higher than that of the control. The lesion depths and mineral loss of the GAPI-treated enamel were less than the control. The crystallinity of the GAPI-treated enamel was higher than the control. This study developed a biocompatible, mineralising and antimicrobial peptide GAPI, which may have potential as an anti-caries agent.