ABSTRACT
Avaliou-se a influência da utilização da agitação ultrassônica na resistência de união à dentina, por meio de push-out, proporcionada pelos cimentos MTA-Angelus branco (MTA) e Biodentine (BD), empregados no selamento de perfurações de furca. Foram utilizados 48 primeiros ou segundos molares inferiores, com raízes não fusionadas, distantes cerca de 2 mm entre si na porção cervical das mesmas. Os dentes foram acessados e, em seguida, as raízes foram seccionadas transversalmente abaixo da junção cemento-esmalte. Os dentes foram montados em blocos de silicona de adição e perfurações de furca realizadas em seus assoalhos paralelamente ao longo eixo dos dentes e perpendiculares aos assoalhos dentais. A amostra foi dividida em quatro grupos (n = 12) em função do material reparador e da utilização ou não da agitação ultrassônica (AU). Quando empregada, a AU foi aplicada em 2 ciclos de 20 segundos por meio de inserto cônico liso acionado por ultrassom piezoelétrico. Concluídos os selamentos eles foram protegidos com cimento de ionômero de vidro e os dentes imersos em PBS. Decorridos 7 dias discos com 1 mm de altura foram retirados dos assoalhos dentais com auxílio de cortadora metalográfica e levados à máquina de ensaio universal. Os resultados expressos em MPa foram submetidos aos testes ANOVA dois fatores e de Bonferroni. Os maiores valores de resistência obtidos foram no grupo Biodentine com ultrassom (29,41 MPa), seguidos em ordem decrescente pelos grupos Biodentine sem ultrassom; MTA com ultrassom e MTA sem ultrassom (3,72 MPa). Nas condições do estudo concluiu-se que o BD apresentou maior resistência de união à dentina radicular; ainda, que a agitação ultrassônica influenciou positivamente na resistência de união do material à dentina.
We evaluated the influence of the use of ultrasonic agitation on the resistance to the dentin, by means of push-out, provided by the white MTA-Angelus (MTA) and Biodentine (BD) cements, used in the sealing of drilling holes. 48 first or second lower molars were used, with unfused roots, about 2 mm apart in the cervical portion of them. The teeth were accessed and then the roots were sectioned transversely below the cementenamel junction. The teeth were mounted in addition silicon blocks and hole drills performed on their floors parallel along the axis of the teeth and perpendicular to the dental floorings. The sample was divided into four groups (n = 12) depending on the repair material and whether ultrasonic agitation (AU) was used. When employed, the AU was applied in 2 20-second cycles by means of a smooth conical insert activated by piezoelectric ultrasound. Once the seals were completed, they were protected with glass ionomer cement and the teeth immersed in PBS. After 7 days, 1 mm high disks were removed from the dental floorboards with the aid of a metallographic cutter and taken to the universal test machine. Results expressed in MPa were submitted to two-factor and Bonferroni ANOVA tests. The highest resistance values obtained were in the group Biodentine with ultrasound (29.41 MPa), followed in descending order by the groups Biodentine without ultrasound; MTA with ultrasound and MTA without ultrasound (3.72 MPa). Under the conditions of the study, it was concluded that BD showed greater resistance to root dentin binding; also, that ultrasonic agitation positively influenced the resistance of the material to dentin binding.
influencia del uso de la agitación ultrasónica sobre la resistencia de la unión a la dentina se evaluó mediante un estiramiento, proporcionado por los cementos blancos (MTA) y biodentinos (BD) MTA-Angelus, empleados en el sello de los taladros. Se utilizaron los primeros o segundos molares inferiores, con raíces sin fundir, a unos 2 mm de distancia en la porción cervical de las raíces. Se accedió a los dientes y luego las raíces se seccionaron transversalmente por debajo de la unión cemento-enamel. Los dientes se ensamblaron además bloques de silicona y agujeros de perforación en sus pisos a lo largo del eje de los dientes y perpendiculares al suelo dental. La muestra se dividió en cuatro grupos (n = 12) según el material de reparación y si se utilizó o no la agitación ultrasónica (AU). Cuando se empleó, la UA se aplicó en 2 ciclos de 20 segundos mediante una inserción cónica suave activada por ultrasonido piezoeléctrico. Una vez concluidos los sellos, se protegieron con cemento ionómero de vidrio y los dientes se sumergieron en PBS. Al cabo de 7 días, los discos de 1 mm de altura se retiraron del suelo de corte metálico y se llevaron a la máquina de ensayo universal. Los resultados expresados como MPa se presentaron a las pruebas de dos factores ANOVA y Bonferroni. Los valores de resistencia más altos obtenidos fueron en el grupo de Biodentina con ultrasonido (29,41 MPa), seguidos en orden descendente por los grupos de Biodentina sin ultrasonido; MTA de ultrasonido y MTA libre de ultrasonido (3,72 MPa). En las condiciones del estudio se concluyó que la DB mostró mayor resistencia de la unión a la dentina raíz; y que la agitación ultrasónica tuvo una influencia positiva en la resistencia del material a la dentina.
ABSTRACT
RESUMEN: En casos complejos como el que se presenta, es necesario detallar cada una de las dificultades que se debe sortear, para brindar al diente la posibilidad de seguir formando parte del sistema estomatognático. Para planificar un tratamiento endodóntico integral es necesario evidenciar la complejidad de los diferentes ítems: desde el retiro del instrumento separado en el conducto distal, la localización del conducto mesiolingual parcialmente calcificado, la desobturación del conducto mesiobucal, el sellado de la perforación en la zona de la furcación y la limpieza exhaustiva del sistema de conductos radiculares, así, se le entrega a la biología, el tiempo necesario para reaccionar y reparar las lesiones osteolíticas presentes tanto a nivel de la furcación como en apical en ambas raíces; para, por último, rehabilitar el diente devolviéndole su funcionalidad y estética. En este caso clínico, se aprecia la perforación en la zona de la furcación, a nivel de la cresta ósea en el tercio corono radicular. Cuanto mayor es el tamaño de la perforación menor posibilidad de éxito. En la actualidad, con el empleo de los nuevos biomateriales de obturación y sellado endodóntico, como los cementos biocerámicos de última generación, se logra mejorar los aspectos clínicos, mecánicos y biológicos, con la posibilidad de realizar procedimientos que antes eran impensados, mejorando así su pronóstico.
ABSTRACT: In cases as complex as the one that is presented, it is necessary to detail each of the difficulties that must be overcome, to give the tooth the possibility of continuing to form part of the stomatognathic system. To plan a comprehensive endodontic treatment, it will be necessary to demonstrate the complexity of the different items present: from the removal of the file separated from the distal canal, the location of the calcified mesiolingual canal, the deobturation of the mesiobuccal canal, the sealing of the perforation in the area of the furcation, up to the exhaustive cleaning of the root canal system, are important to give biology the time necessary to repair the osteolytic lesions present both at the level of the furcation and apically in both roots; to finally rehabilitate the tooth, restoring its functionality and aesthetics.In this particular case, the perforation can be seen in the furcation area, at the level of the bone crest in the Root crown third. The larger the piercing, the less success is expected of the treatment. Thanks to the use of technologies applied to obtain new endodontic filling and sealing materials such as the latest generation of bioceramic cements, clinical, mechanical and biological aspects are improved, providing the possibility of performing procedures that were previously unthinkable, thus improving prognosis.
ABSTRACT
The aim of the present study is to describe a new technique through which it is possible to complete the maxillary sinus lift procedure even in case of severe damage or complete removal of the sinus mucosa using the PRGF-Endoret® platelet concentrate. Eighteen patients (ratio F:M=4:5; average age: 58.2 years; DS: 8.85 years) with severe perforation (more than 10 millimetres of diameter) of the sinus mucosa during the maxillary sinus lift procedure were selected. Normally the procedure is interrupted due to impossible stabilization of the graft material inside the subantral cavity. On the contrary, our protocol foreseen the sealing of the perforation using the PRGF autologous gel membranes or the creation of a new sinus pseudomembrane through which the graft material was covered. The PRGF-Endoret were obtained according to the protocol developed by BTI (Biotechnology Institute - Vitoria, Spain). In 14 cases out of 18 implant fixtures were concurrently inserted while in 4 cases the fixture insertion was postponed after 6 months: 37 fixtures were inserted (27 at the same time and 10 after 6 months). 2 months after surgery the CBCT showed a correct pneumatization of the maxillary sinus in 16 patients out of 18 (89% of cases), while after 12 months the radiological normalization of the maxillary sinus was present in 17 patients out of 18, bringing the healing rate to 94% of cases. Regarding implant healing, 2 out of 37 implants inserted were lost in the first month after the surgical phase, whereas 12 months after prosthesis application the other 35 implants were perfectly osteointegrated with a healing rate equal to 94.6% of the fixtures. 36 months after the surgery all the fixtures were osteointegrated (35 of 37 implants with a percentage of 94.6% of success). We may conclude that the use of PRGF allowed to complete the sinus lift even in case of severe perforation of the sinus mucosa or its total removal thanks to its capability to stabilize the graft, its antibacterial and antifungal activity and its anabolic effect and favouring bone regeneration.