Pulse crops: nutrient density, affordability, and environmental impact.

Introduction: Sustainable foods need to be nutrient-rich, affordable, environmentally friendly, and socially acceptable. Pulses, which include beans, lentils, chickpeas, and dried peas are a food group that can fit all those criteria. Methods: These concepts were tested serially using nutrient profiling methods that focused on protein and were extended to include food prices, greenhouse gas emissions, and energy demand. The present sustainability analyses were based on the US Department of Agriculture (USDA) nutrient composition and food prices data. Environmental impact data came from life cycle assessments (LCA). First, the USDA Protein Foods Group was disaggregated into animal and plant proteins. Plant proteins were separated into pulses, soy products, and nuts and seeds. Results: Pulses were among the lowest-cost protein sources (per 100 g and per 100 kcal) and had the lowest greenhouse gas emissions GHGE and energy demand. Pulses were among the most sustainable foods when monetary and energy costs were expressed per 50 g of protein (equivalent to 100% DV). Pulses scored well on the Nutrient Rich Food (NRF9.3) nutrient profiling system and on the related Affordable Nutrition Index that assessed nutrient density per penny. Discussion: Pulses are a source of low-cost plant-based protein and a variety of priority vitamins and minerals, have low carbon footprint and energy demand, and are a valued culinary ingredient across diverse regions and cultures. As dietary guidance turns to plant-based diets, pulses need to be integrated into the global sustainability framework.

Shot-Noise Limited Nonlinear Optical Imaging Excited With GHz Femtosecond Pulses and Denoised by Deep-Learning.

Multiphoton fluorescence microscopy excited with femtosecond pulses at high repetition rates, particularly in the range of 100's MHz to GHz, offers an alternative solution to suppress photoinduced damage to biological samples, for example, photobleaching. Here, we demonstrate the use of a U-Net-based deep-learning algorithm for suppressing the inherent shot noise of the two-photon fluorescence images excited with GHz femtosecond pulses. With the trained denoising neural network, the image quality of the representative two-photon fluorescence images of the biological samples is shown to be significantly improved. Moreover, for input raw images with even SNR reduced to -4.76 dB, the trained denoising network can recover the main image structure from noise floor with acceptable fidelity and spatial resolution. It is anticipated that the combination of GHz femtosecond pulses and deep-learning denoising algorithm can be a promising solution for eliminating the trade-off between photoinduced damage and image quality in nonlinear optical imaging platforms.

Deciphering adiabatic rotating frame relaxometry in biological tissues.

PURPOSE: This work aims to unravel the intricacies of adiabatic rotating frame relaxometry in biological tissues. THEORY AND METHODS: The classical formalisms of dipolar relaxation R 1 ρ $$ {R}_{1\rho } $$ and R 2 ρ $$ {R}_{2\rho } $$ were systematically analyzed for water molecules reorienting on "fast" and "slow" timescales. These two timescales are, respectively, responsible for the absence and presence of R 1 ρ $$ {R}_{1\rho } $$ dispersion. A time-averaged R 1 ρ $$ {R}_{1\rho } $$ or R 2 ρ $$ {R}_{2\rho } $$ over an adiabatic pulse duration was recast into a sum of R 1 $$ {R}_1 $$ and R 2 $$ {R}_2 $$ , but with different weightings. These weightings depend on the specific modulations of adiabatic pulse waveforms. In this context, stretched hyperbolic secant ( HSn $$ HSn $$ ) pulses were characterized. Previously published H S 1 $$ HS1 $$ R 1 ρ $$ {R}_{1\rho } $$ , continuous-wave (CW) R 1 ρ $$ {R}_{1\rho } $$ , and R 1 $$ {R}_1 $$ measures from 12 agarose phantoms were used to validate the theoretical predictions. A similar validation was also performed on previously published HSn $$ HSn $$ R 1 ρ $$ {R}_{1\rho } $$ ( n $$ n $$ =1, 4, 8) and HS 1 $$ HS1 $$ R 2 ρ $$ {R}_{2\rho } $$ from bovine cartilage specimens. RESULTS: Longitudinal relaxation weighting decreases for HSn $$ HSn $$ pulses as n $$ n $$ increases. Predicted CW R 1 ρ cal $$ {R}_{1\rho}^{cal} $$ values from agarose phantoms align well with the measured CW R 1 ρ exp $$ {R}_{1\rho}^{exp} $$ values, as indicated by a linear regression function: R 1 ρ cal = 1.04 * R 1 ρ exp - 1.96 $$ {R}_{1\rho}^{cal}={1.04}^{\ast }{R}_{1\rho}^{exp}-1.96 $$ . The predicted adiabatic R 1 ρ $$ {R}_{1\rho } $$ and R 2 ρ $$ {R}_{2\rho } $$ from cartilage specimens are consistent with those previously measured, as quantified by: R 1 ρ , 2 ρ cal = 1.10 * R 1 ρ , 2 ρ exp - 0.41 $$ {R}_{1\rho, 2\rho}^{cal}={1.10}^{\ast }{R}_{1\rho, 2\rho}^{exp}-0.41 $$ . CONCLUSION: This work has theoretically and experimentally demonstrated that adiabatic R 1 ρ $$ {R}_{1\rho } $$ and R 2 ρ $$ {R}_{2\rho } $$ can be recast into a sum of R 1 $$ {R}_1 $$ and R 2 $$ {R}_2 $$ , with varying weightings. Therefore, any suggestions that adiabatic rotating frame relaxometry in biological tissues could provide more information than the standard R 1 $$ {R}_1 $$ and R 2 $$ {R}_2 $$ warrant closer scrutiny.

Role of Food Texture, Oral Processing Responses, Bolus Properties, and Digestive Conditions on the Nutrient Bioaccessibility of Al Dente and Soft-Cooked Red Lentil Pasta.

The purpose of this study was to assess the impact of food texture, oral processing, bolus characteristics, and in vitro digestive conditions on the starch and protein digestibility of al dente and soft-cooked commercial red lentil pasta. For that, samples were cooked as suggested by the provider and their texture properties were promptly analysed. Then, normal and deficient masticated pasta boluses were produced by four healthy subjects, characterised in terms of their oral processing, bolus granulometry, texture and viscoelastic properties, and finally subjected to static in vitro digestion, according to the INFOGEST consensus for both adults and the older adult population. Normal masticated boluses exhibited greater saliva impregnation and lower proportions of large particles, hardness, and stiffness than deficient masticated boluses. Likewise, insufficiently masticated al dente-cooked pasta boluses caused a delay in oral starch digestion owing to the larger particles attained during food oral processing, while reduced intestinal conditions in the elderly only interfere with the release of total soluble proteins in all samples. This work evidences the importance of considering the initial texture of products, oral capabilities, processing behaviour, and physical and mechanical properties of food boluses in digestion studies, opening new prospects in designing pulse-based foods that meet the nutritional requirements of the world's population.

Repair Engineering of Crystal Structure in van der Waals Materials by Probe Electron Beam.

The advancement of electronic technology has led to increasing research on performance and stability. Continuous electrical pulse stimulation can cause crystal structure changes, affecting performance and accelerating aging. Controlled repair of these defects is crucial. In this study, we investigated crystal structure changes in van der Waals (vdW) InSe crystals under continuous electric pulses by using electron beam lithography (EBL) and spherical aberration corrected transmission electron microscopy (Cs-TEM). Results show that electrical pulses induce amorphous regions in the InSe lattice, increasing the device resistance. We used Cs-STEM probe scanning for precise repair, abbreviated SPRT, to optimize device performance. SPRT is related to electric fields induced by the electron beam and can be applied to other 2D materials like α-In2Se3 and CrSe2, offering a potential approach to extend device lifespan.

Cardiomyocytes Permeabilization and Electrotransfection by Unipolar and Bipolar Asymmetric Electric Field Pulses.

Short electric field pulses represent a novel potential approach for achieving uniform electroporation within tissue containing elongated cells oriented in various directions, such as electroporation-based cardiac ablation procedures. In this study, we investigated how electroporation with nanosecond pulses with respect to different pulse shapes (unipolar, bipolar, and asymmetric) influences cardiomyocyte permeabilization and gene transfer. For this purpose, rat cardiomyocytes (H9c2) were used. The efficacy of the pulsed electric field protocols was assessed by flow cytometry and electrogene transfer by fluorescent and holotomographic microscopy. The response of the cells was assessed by the metabolic activity (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide [MTT] assay), F-actin distribution in cells by confocal microscopy, and muscle atrophy F-box (MAFbx) marker. We show nano- and microsecond pulse protocols, which are not cytotoxic for cardiac muscle cells and can be efficiently used for gene electrotransfection. Asymmetric nanosecond pulsed electric fields were similarly efficient in plasmid delivery as microsecond and millisecond protocols. However, the millisecond protocol induced a higher MAFbx expression in H9c2 cells.

Changes in Mitochondrial Membrane Potential in In Vitro Electroporation with Nano- and Microsecond Pulses.

With the introduction of nanosecond (ns) pulses, it was suggested that such pulses could be used to permeabilize intracellular membranes, including the mitochondrial membrane. The results presented thus far, however, are not conclusive. Interestingly, the effect of longer microsecond (µs) pulses on changes in mitochondria has never been investigated. We, therefore, investigated the changes in mitochondrial membrane permeability through changes in mitochondrial membrane potential (MMP) in CHO and H9c2 cells after electroporation with 4 ns, 200 ns, and 100 µs pulses. In the range of reversible electroporation, the decrease in MMP generally depended on the cell line. In CHO, ns pulses decreased MMP at lower electroporation intensities than µs. In H9c2, ns and µs were equally effective. In the range of irreversible electroporation, MMP decreased even further, regardless of pulse duration and cell type. The analysis at different time points showed that the changes in MMP within the first hour after pulse treatment are dynamic. Our results on the efficacy of ns pulses are consistent with published data, but with this study we show that µs pulses cause similar changes in MMP as ns pulses, demonstrating that electroporation affects MMP regardless of pulse duration. At the same time, however, differences in MMP changes were observed between different cell lines, indicating some dependence of MMP changes on cell type.

A Model for Reversible Electroporation to Deliver Drugs into Diseased Tissues.

Drug delivery through electroporation could be highly beneficial for the treatment of different types of diseased tissues within the human body. In this work, a mathematical model of reversible tissue electroporation is presented for injecting drug into the diseased cells. The model emphasizes the tissue boundary where the drug is injected as a point source. In addition, the effect of drug loss at tissue boundaries through extracellular space is studied elaborately. Multiple pulses are applied to deliver a sufficient amount of drug into the targeted cells. The set of differential equations that model the physical circumstances are solved numerically. This model obtains a mass transfer coefficient (MTC), in terms of pore fraction coefficient and drug permeability that controls the drug transport from extracellular to intracellular space. The drug penetration throughout the tissue is captured for the application of different pulses. The boundary effects on drug concentration are highlighted in this study. The advocated model is able to perform homogeneous drug transport into the cells so that the affected tissue is treated completely. This model can be applied to optimize clinical experiments by avoiding the lengthy and costly in vivo and in vitro experiments.

Replication of Radial Pulses Using Magneto-Rheological Fluids.

The radial pulse is a critical health marker with expanding applications in wearable technology. To improve these applications, developing a pulse generator that consistently produces realistic pulses is crucial for validation and training. The goal of this study was to design and test a cost-effective pulse simulator that can accurately replicate a wide range of age-dependent radial pulses with simplicity and precision. To this end, this study incorporated a magneto-rheological (MR) fluid device into a cam-based pulse simulator. The MR device, as a key component, enables pulse shaping without the need for additional cams, substantially reducing the cost and complexity of control compared with existing pulse simulators. To evaluate the performance of the MR pulse simulator, the root-mean-square (RMS) error criterion (less than 5%) was used to compare the experimentally obtained pulse waveform with the in vivo pulse waveform for specific age groups. After demonstrating that the MR simulator could produce three representative in vivo pulses, a parametric study was conducted to show the feasibility of the slope-based pulse-shaping method for the MR pulse simulator to continuously generate a range of age-related pulses.

Acoustic Features of the Impact of Laser Pulses on Metal-Ceramic Carbide Alloy Surface.

Technologies associated with using concentrated energy flows are increasingly used in industry due to the need to manufacture products made of hard alloys and other difficult-to-process materials. This work is devoted to expanding knowledge about the processes accompanying the impact of laser pulses on material surfaces. The features of these processes are reflected in the acoustic emission signals, the parameters of which were used as a tool for understanding the accompanying phenomena. The influence of plasma formations above the material surface on self-oscillatory phenomena and the self-regulation process that affects pulse productivity were examined. The stability of plasma formation over time, its influence on the pulse performance, and changes in the heat flux power density were considered. Experimental data show the change in the power density transmitted by laser pulses to the surface when the focal plane is shifted. Experiments on the impact of laser pulses of different powers and durations on the surface of a hard alloy showed a relationship between the amplitude of acoustic emission and the pulse performance. This work shows the data content of acoustic emission signals and the possibility of expanding the research of concentrated energy flow technologies.

Lens Fragmentation with Picosecond Laser Pulses After Artificial Cataract Induction with Microwaves.

Objectives: In this work we demonstrate the first laboratory study results of lens fragmentation with low-energy picosecond ultrashort laser pulses after artificial induction of cataract with microwave radiation on an ex vivo animal model. Background: This method will be evaluated with regard to the further development of lens fragmentation with novel ultrashort picosecond laser systems instead of ultrasonic phacoemulsification or the significantly more complex femtosecond laser fragmentation. Methods: As samples we used postmortem porcine eyes. The lenses were dissected and then irradiated in a microwave oven for artificial cataract induction. Subsequent computer-driven lens fragmentation was performed with a 12 ps, 1064 nm pulsed laser source with 100 µJ pulse energy, and 10 kHz pulse repetition rate. Results: Both the artificial cataract induction and the lens fragmentation were demonstrated. When inducing cataract, different degrees/stages of opaqueness and hardness could be achieved with different irradiation times and methods. The fragmentation with 12 ps pulses led to good results with regard to ablation depth and rate, especially for the softer lenses. Conclusions: As could be shown, low-energy picosecond ultrashort laser pulses are feasible for cataractous lens fragmentation on an ex vivo animal model with artificial cataract induction. Thus, this technique may influence future cataract surgeries by possibly being an alternative or extension to state-of-the-art methods. This will be evaluated with further tests and studies.

Algae-Boosted Chickpea Hummus: Improving Nutrition and Texture with Seaweeds and Microalgae.

The global food industry faces a critical challenge in ensuring sustainable practices to meet the demands of a growing population while minimizing environmental impact. At the same time, consumer awareness and the demand for quality products drive innovation and inspire positive changes in the food supply chain. Aiming to create a more sustainable and nutrient-rich alternative, this study is summarized by characterizing the physical and chemical characteristics of algae-enriched chickpea hummus: an innovative approach to popular food products. The algae-enriched hummuses were developed with an incorporation (6% w/w) of Gelidium corneum and Fucus vesiculosus seaweeds and Chlorella vulgaris (hetero and autotrophic) microalgae to reveal their technological potential and evaluate the nutritional and rheological characteristics relative to a control hummus (without algae). From a nutritional perspective, the main results indicated that hummus enriched with microalgae showed an increase in protein content and an improved mineral profile. This was particularly notable for the seaweed F. vesiculosus and the autotrophic microalga C. vulgaris, leading to claims of being a "source of" and "rich in" various minerals. Additionally, the antioxidant activity of hummus containing F. vesiculosus and C. vulgaris increased significantly compared to the control. From a rheological perspective, incorporating algae into the humus strengthened its structure. The microalgae further enhanced the dish's elasticity and firmness, thus improving this chickpea-based dish´s overall texture and quality.

[Micro-energy medicine in the treatment of erectile dysfunction: An update].

Erectile dysfunction (ED) is one of the most common sexual disorders in males, which seriously affects the health of the patient and well-being of the family. The therapeutic strategy of ED is an individualized comprehensive treatment based on phosphodiesterase inhibitors. At present, as a new option for the treatment of ED, micro-energy medicine has attracted more and more attention in its therapeutic effects and advantages. This article presents an overview of the progress in the studies of micro-energy medicine in the treatment of ED.

Stability of Buriti Oil Microencapsulated in Mixtures of Azuki and Lima Bean Flours with Maltodextrin.

Buriti oil (Mauritia flexuosa L.) is rich in carotenoids, mainly ß-carotene, and has great value for application as a food, pharmaceutical, or cosmetic ingredient, as well as a natural pigment. Microencapsulation is a promising technique to protect compounds sensitive to degradation such as ß-carotene. Materials composed of carbohydrates and proteins, such as azuki bean (Vigna angularis L.) and lima bean (Phaseolus lunatus L.) flours, are alternative matrices for microencapsulation, which additionally provide good amounts of nutrients. In combination with maltodextrin, the flours represent a protective barrier in stabilizing lipophilic compounds such as buriti oil for subsequent spray drying. In this work, the performance of mixtures of maltodextrin with whole azuki and lima bean flours was evaluated in the microencapsulation of buriti oil. The microcapsules showed good results for solubility (>80%), hygroscopicity (~7%), encapsulation efficiency (43.52 to 51.94%), and carotenoid retention (64.13 to 77.49%.) After 77 days of storage, the microcapsules produced maintained 87.79% and 90.16% of carotenoids, indicating that the powders have high potential for application as encapsulants in the food and pharmaceutical industries.

Hydrolysis and diffusion of raffinose oligosaccharides family products in chickpeas, lentils, and beans under different pH and temperature steeping conditions.

Soaking pulses in water is a traditional practice widely used both by many households and by the food industry, and depending on the specific conditions used, can effectively reduce α-galactosides. Monitoring changes in α-galactoside content in pulses under different steeping conditions can provide insights into the degradation mechanisms and help overcome the barrier to consumption caused by digestive problems. In this study, we analyzed the impact of steeping at different temperatures (30, 45, 60, 75, and 90 °C) and at different pH (4.0, 5.0, and 6.0) on α-galactosides content in chickpeas, lentils, and beans. Our results showed that the lower the pH, the faster the α-galactosides were reduced. Moreover, steeping at lower temperatures (30 °C and 45 °C) favored hydrolysis of α-galactosides, whereas steeping at higher temperatures (60, 75, and 90 °C) favored diffusion. Soaking at 45 °C at a pH of 4.0 for 3 h resulted in acceptable levels of α-galactosides (less than 1 g/100 g), i.e. a reduction of up to 65 % in chickpeas, 85 % in lentils, and 52 % in beans.

Targeted inhibition of kisspeptin neurons reverses hyperandrogenemia and abnormal hyperactive LH secretion in a preclinical mouse model of polycystic ovary syndrome.

STUDY QUESTION: Do hyperactive kisspeptin neurons contribute to abnormally high LH secretion and downstream hyperandrogenemia in polycystic ovary syndrome (PCOS)-like conditions and can inhibition of kisspeptin neurons rescue such endocrine impairments? SUMMARY ANSWER: Targeted inhibition of endogenous kisspeptin neuron activity in a mouse model of PCOS reduced the abnormally hyperactive LH pulse secretion and hyperandrogenemia to healthy control levels. WHAT IS KNOWN ALREADY: PCOS is a reproductive disorder characterized by hyperandrogenemia, anovulation, and/or polycystic ovaries, along with a hallmark feature of abnormal LH hyper-pulsatility, but the mechanisms underlying the endocrine impairments remain unclear. A chronic letrozole (LET; aromatase inhibitor) mouse model recapitulates PCOS phenotypes, including polycystic ovaries, anovulation, high testosterone, and hyperactive LH pulses. LET PCOS-like females also have increased hypothalamic kisspeptin neuronal activation which may drive their hyperactive LH secretion and hyperandrogenemia, but this has not been tested. STUDY DESIGN, SIZE, DURATION: Transgenic KissCRE+/hM4Di female mice or littermates Cre- controls were treated with placebo, or chronic LET (50 µg/day) to induce a PCOS-like phenotype, followed by acute (once) or chronic (2 weeks) clozapine-N-oxide (CNO) exposure to chemogenetically inhibit kisspeptin cells (n = 6 to 10 mice/group). PARTICIPANTS/MATERIALS, SETTING, METHODS: Key endocrine measures, including in vivo LH pulse secretion patterns and circulating testosterone levels, were assessed before and after selective kisspeptin neuron inhibition and compared between PCOS groups and healthy controls. Alterations in body weights were measured and pituitary and ovarian gene expression was determined by qRT-PCR. MAIN RESULTS AND THE ROLE OF CHANCE: Acute targeted inhibition of kisspeptin neurons in PCOS mice successfully lowered the abnormally hyperactive LH pulse secretion (P < 0.05). Likewise, chronic selective suppression of kisspeptin neuron activity reversed the previously high LH and testosterone levels (P < 0.05) down to healthy control levels and rescued reproductive gene expression (P < 0. 05). LARGE SCALE DATA: N/A. LIMITATIONS, REASONS FOR CAUTION: Ovarian morphology was not assessed in this study. Additionally, mouse models can offer mechanistic insights into neuroendocrine processes in PCOS-like conditions but may not perfectly mirror PCOS in women. WIDER IMPLICATIONS OF THE FINDINGS: These data support the hypothesis that overactive kisspeptin neurons can drive neuroendocrine PCOS-like impairments, and this may occur in PCOS women. Our findings complement recent clinical investigations using NKB receptor antagonists to lower LH in PCOS women and suggest that pharmacological dose-dependent modulation of kisspeptin neuron activity may be a valuable future therapeutic target to clinically treat hyperandrogenism and lower elevated LH in PCOS women. STUDY FUNDING/COMPETING INTEREST(S): This research was supported by NIH grants R01 HD111650, R01 HD090161, R01 HD100580, P50 HD012303, R01 AG078185, and NIH R24 HD102061, and a pilot project award from the British Society for Neuroendocrinology. There are no competing interests.

Norepinephrine Neurons in the Nucleus of the Solitary Tract Suppress Luteinizing Hormone Secretion in Female Mice.

Stress impairs fertility, at least in part, via inhibition of gonadotropin secretion. Luteinizing hormone (LH) is an important gonadotropin that is released in a pulsatile pattern in males and in females throughout the majority of the ovarian cycle. Several models of stress, including acute metabolic stress, suppress LH pulses via inhibition of neurons in the arcuate nucleus of the hypothalamus that coexpress kisspeptin, neurokinin B, and dynorphin (termed KNDy cells) which form the pulse generator. The mechanism for inhibition of KNDy neurons during stress, however, remains a significant outstanding question. Here, we investigated a population of catecholamine neurons in the nucleus of the solitary tract (NTS), marked by expression of the enzyme dopamine beta-hydroxylase (DBH), in female mice. First, we found that a subpopulation of DBH neurons in the NTS is activated (express c-Fos) during metabolic stress. Then, using chemogenetics, we determined that activation of these cells is sufficient to suppress LH pulses, augment corticosterone secretion, and induce sickness-like behavior. In subsequent studies, we identified evidence for suppression of KNDy cells (rather than downstream signaling pathways) and determined that the suppression of LH pulses was not dependent on the acute rise in glucocorticoids. Together these data support the hypothesis that DBH cells in the NTS are important for regulation of neuroendocrine and behavioral responses to stress.

Defect-Rich CuZn Nanoparticles for Model Catalysis Produced by Femtosecond Laser Ablation.

Femtosecond laser ablation of Cu0.70Zn0.30 targets in ethanol led to the formation of periodic surface nanostructures and crystalline CuZn alloy nanoparticles with defects, low-coordinated surface sites, and, controlled by the applied laser fluence, different sizes and elemental composition. The Cu/Zn ratio of the nanoparticles was determined by energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and selected area electron diffraction. The CuZn nanoparticles were about 2-3 nm in size, and Cu-rich, varying between 70 and 95%. Increasing the laser fluence from 1.6 to 3.2 J cm-2 yielded larger particles, more stacking fault defects, and repeated nanotwinning, as evident from high-resolution transmission electron microscopy, aided by (inverse) fast Fourier transform analysis. This is due to the higher plasma temperature, leading to increased random collisions/diffusion of primary nanoparticles and their incomplete ordering due to immediate solidification typical of ultrashort pulses. The femtosecond laser-synthesized often nanotwinned CuZn nanoparticles were supported on highly oriented pyrolytic graphite and applied for ethylene hydrogenation, demonstrating their promising potential as model catalysts. Nanoparticles produced at 3.2 J cm-2 exhibited lower catalytic activity than those made at 2.7 J cm-2. Presumably, agglomeration/aggregation of especially 2-3 nm sized nanoparticles, as observed by postreaction analysis, resulted in a decrease in the surface area to volume ratio and thus in the number of low-coordinated active sites.

Dataset on biodiversity and agronomic performance of lentil and chickpea field trials in the Mediterranean Region.

Pulse crops have become more important in food production and consumption systems for the transition towards sustainability. We present an agroecological dataset from 304 samples from 12 legume field trials in five locations across three countries in the Mediterranean. The field trials were established in the seasons 2021/22 and 2022/23 and tested different lentil or chickpea cultivars, inoculants, intercropping and weeding regimes. The dataset encompasses detailed information on wild flora diversity, grain yield, associated management practices, soil texture and weather during the growing period. Wild flora diversity was recorded by conducting a vegetation survey in 1 × 2 m sample plots. Grain yield was determined at the crop maturity stage, with full plots harvested in Spain, while samples were taken in Croatia and Tunisia. Environmental variables were via laboratory analysis or bottle testing of soil samples and analysis of local weather data. The comprehensiveness of the dataset, including all relevant agroecological information, enables other researchers to employ the dataset for various statistical analyses of agroecosystem processes, such as plant-environment interactions or biodiversity-yield trade-off analysis.

Pulsed processing by cold plasma, applied to industrial emission control.

A promising pollution control technology is cold plasma driven chemical processing. The plasma is a pulsed electric gas discharge inside a near atmospheric-pressure-temperature reactor. The system is energized by a continuous stream of very short high-voltage pulses. The exhaust gas to be treated flows through the reactor. The methods applied involve the development of robust cold plasma systems, industrial applications and measuring technologies. Tests of the systems were performed at many industrial sites and involved control of airborne VOC (volatile organic compound) and odor. Electrical, chemical and odor measuring data were collected with state-of-the-art methods. To explain the test data an approximate solution of global reaction kinetics of pulsed plasma chemistry was developed. It involves the Lambert function and, for convenience, a simple approximation of it. The latter shows that the amount of removal, in good approximation, is a function of a single variable. This variable is electric plasma power divided by gas flow divided by input concentration. In the results sections we show that in some cases up to 99% of volatile pollution can be removed at an acceptable energy requirement. In the final sections we look into future efficiency enhancements by implementation of (sub)nanosecond pulsed plasma and solid state high-voltage technology and by integration with catalyst technology.