New Soft Actuating Way by Rapidly Temperature Change of Electrocaloric Effect.

Compared to traditional temperature control methods, the electrocaloric (EC) effect offers several advantages such as small size, rapid response, and environmental friendliness. However, current EC effects are generally used for the cooling area rather than heating. Here, poly(vinylidenefluorideter-trifluoroethylene-ter-chlorofluoroethylene) [P(VDF-TrFE-CFE)] film is combined with an electrothermal actuator (ETA) composed of polyethylene (PE) film and carbon nanotube (CNT) film. The heating and cooling process of the EC effect is used to help drive the ETA. The P(VDF-TrFE-CFE) film can produce a temperature change (ΔT) of 3.7 °C at 90 MV/m, and this process occurs within 0.1 s. With this ΔT, the composite film actuator can produce a deflection of 10°. In addition, due to the electrostrictive effect of P(VDF-TrFE-CFE), the composite film can also be used as an actuator. At 90 MV/m, the composite film actuator can produce a deflection over 240° within 0.05 s. Apart from other current driving modes for thermally responsive actuators, in this paper, a new type of soft actuating composite film by the temperature change of the EC effect is proposed. Except from ETAs, the EC effect can also have a wide application prospect in other thermally responsive actuators, including shape memory polymer actuators, shape memory alloy actuators, and so on.

Twistocaloric Modeling of Elastomer Fibers and Experimental Validation.

The twistocaloric effect is attributed to the change in entropy of the material driven by torsional stress. It is responsible for the torsional refrigeration of fiber materials that has been widely exploited as one of the solid-state cooling techniques with high efficiency and low volume change rate. The lack of theories and mathematical models of twistocaloric effect, however, limits broad applications of torsional refrigeration. In this work, a twistocaloric model is established to capture the relationship between twist density and temperature variation of natural rubber fibers and thermoplastic elastomer yarns. An experimental setup consisting torsion actuator and torque sensor coupled with a temperature measurement system is built to validate the model. Using the Maxwell relationship, twistocaloric coefficient is measured by quantifying the thermal effect induced by torsion under shear strain. The experimental characterization of the twistocaloric effect in natural rubber fiber and thermoplastic elastomer yarn are consistent with the theoretical predictions.

An Active Pixel-Matrix Electrocaloric Device for Targeted and Differential Thermal Management.

More than 55% of electronic failures are caused by damage from localized overheating. Up to now, there is still no efficient method for targeted temperature control against localized overheating. Although some existing thermal management devices handle this issue by full coverage cooling, it generates a lot of useless energy consumption. Here, a highly efficient pixel-matrix electrocaloric (EC) cooling device is reported, which can realize a targeted and differential thermal management. The modified poly(vinylidene fluoride-tertrifluoroethylene-chlorofluoroethylene) reaches a large adiabatic temperature change of 7.8 K and is more suitable for thermal transfer and electrostatic actuation at high frequencies. All active pixels in the EC cooling device exhibit a stable temperature span of 4.6 K and a heat flux of 62 mW cm-2 , which is more than twice that of the one-layer EC device. Each refrigeration pixel can be independently controlled and effectively cooled down the localized overheating site(s) in situ. The surface temperature of the simulated central processing unit decreases by 33.2 K at 120 s after applying this EC device. Such a compact, embeddable, low cost, and active solid-state pixel-matrix cooling device has great potential for localized overheating protection in microelectronics.

Novel Fluorite-Structured Materials for Solid-State Refrigeration.

Refrigeration based on the electrocaloric effect can offer many advantages over conventional cooling technologies in terms of efficiency, size, weight, and power source. The discovery of ferroelectric and antiferroelectric properties in fluorite-based materials in 2011 has led to diverse applications related to memory (e.g., ferroelectric tunnel junctions, nonvolatile memory, and field-effect transistors) and energy fields (e.g., energy storage and harvesting, electrocaloric refrigeration, and infrared detection). Fluorite-based materials exhibit several properties not shared by most conventional materials (such as in terms of compatibility with complementary metal-oxide semiconductors and 3D nanostructures, deposition thickness at the nanometer scale, and simple composition). Here, the electrocaloric refrigeration properties of fluorite-based ferroelectric/antiferroelectric materials are reviewed by focusing on the advantages of ZrO2 - and HfO2 -based materials (e.g., relative to conventional perovskite- and polymer-based counterparts). Finally, the recent progress made in this research field are also discussed along with its future perspectives.

Giant Barocaloric Effect at the Spin Crossover Transition of a Molecular Crystal.

The first experimental evidence for a giant, conventional barocaloric effect (BCE) associated with a pressure-driven spin crossover transition near room temperature is provided. Magnetometry, neutron scattering, and calorimetry are used to explore the pressure dependence of the SCO phase transition in polycrystalline samples of protonated and partially deuterated [FeL2 ][BF4 ]2 [L = 2,6-di(pyrazol-1-yl)pyridine] at applied pressures of up to 120 MPa (1200 bar). The data indicate that, for a pressure change of only 0-300 bar (0-30 MPa), an adiabatic temperature change of 3 K is observed at 262 K or 257 K in the protonated and deuterated materials, respectively. This BCE is equivalent to the magnetocaloric effect (MCE) observed in gadolinium in a magnetic field change of 0-1 Tesla. The work confirms recent predictions that giant, conventional BCEs will be found in a wide range of SCO compounds.

Design and Performance Assessment of a Solid-State Microcooler for Thermal Neuromodulation.

It is well known that neural activity can be modulated using a cooling device. The applications of this technique range from the treatment of medication-resistant cerebral diseases to brain functional mapping. Despite the potential benefits of such technique, its use has been limited due to the lack of suitable thermal modulators. This paper presents the design and validation of a solid-state cooler that was able to modulate the neural activity of rodents without the use of large and unpractical water pipes. A miniaturized thermal control solution based exclusively on solid-state devices was designed, occupying only 5 mm × 5 mm × 3 mm, and featuring the potential for wireless power and communications. The cold side of the device was cooled to 26 °C, while the hot side was kept below 43 °C. This range of temperatures is compatible with brain cooling and efficient enough for achieving some control of neural activity.

Giant Negative Electrocaloric Effect in (Pb,La)(Zr,Sn,Ti)O3 Antiferroelectrics Near Room Temperature.

(Pb0.97La0.02)(Zr xSn0.94- xTi0.06)O3 (PLZST) antiferroelectric ceramics with x = 0.75-0.90 have been fabricated and found to be a novel electrocaloric material system with a giant negative electrocaloric effect (Δ T = -11.5 K) and a large electrocaloric strength (|Δ T/Δ E| = 0.105 K cm kV-1) near room temperature. Additionally, the PLZST antiferroelectric ceramic also exhibits a large positive electrocaloric effect around the Curie temperature. The giant negative effect and the coexistence of both positive and negative electrocaloric effects in one material indicate a promising possibility to develop mid- to large-scale solid-state cooling devices with high efficiency.

Giant Negative Electrocaloric Effects of Hf0.5 Zr0.5 O2 Thin Films.

Hafnia (HfO2 )-zirconia (ZrO2 ) solid solution films show giant positive (ΔT = 13.4 K) and negative (ΔT = -10.8 K) electrocaloric effects that can be simply controlled by tuning the Hf/Zr ratio. It is expected that the combination of the electrocaloric effects with opposite signs in this lead-free, simple, binary oxide can significantly improve the efficiency of electrocaloric cooling.

Giant Mechanocaloric Effects in Fluorite-Structured Superionic Materials.

Mechanocaloric materials experience a change in temperature when a mechanical stress is applied on them adiabatically. Thus, far, only ferroelectrics and superelastic metallic alloys have been considered as potential mechanocaloric compounds to be exploited in solid-state cooling applications. Here we show that giant mechanocaloric effects occur in hitherto overlooked fast ion conductors (FIC), a class of multicomponent materials in which above a critical temperature, Ts, a constituent ionic species undergoes a sudden increase in mobility. Using first-principles and molecular dynamics simulations, we found that the superionic transition in fluorite-structured FIC, which is characterized by a large entropy increase of the order of 10(2) JK(-1) kg(-1), can be externally tuned with hydrostatic, biaxial, or uniaxial stresses. In particular, Ts can be reduced several hundreds of degrees through the application of moderate tensile stresses due to the concomitant drop in the formation energy of Frenkel pair defects. We predict that the adiabatic temperature change in CaF2 and PbF2, two archetypal fluorite-structured FIC, close to their critical points are of the order of 10(2) and 10(1) K, respectively. This work advocates that FIC constitute a new family of mechanocaloric materials showing great promise for prospective solid-state refrigeration applications.

Giant Negative Electrocaloric Effect in Antiferroelectric La-Doped Pb(ZrTi)O3 Thin Films Near Room Temperature.

Antiferroelectric thin films are demonstrated as a new class of giant electrocaloric materials that exhibit a negative electrocaloric response of about -5 K near room temperature. The giant negative electrocaloric effect may open up a new paradigm for light, compact, reliable, and high-efficiency refrigeration devices.

Ferroelectric polymer nanocomposites for room-temperature electrocaloric refrigeration.

Solution-processable ferroelectric polymer nanocomposites are developed as a new form of electrocaloric materials that can be effectively operated under both modest and high electric fields at ambient temperature. By integrating the complementary properties of the constituents, the nanocomposites exhibit state-of-the-art cooling energy densities. Greatly improved thermal conductivity also yields superior cooling power densities validated by finite volume simulations.